Relevant bibliographies by topics / Temperature change of coolant

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Temperature change of coolant'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Temperature change of coolant.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Temperature change of coolant"

1

Wang, Bo, Changzhi Jiao, and Shiheng Zhang. "Numerical Improvement of Battery Thermal Management Integrating Phase Change Materials with Fin-Enhanced Liquid Cooling." Energies 18, no. 9 (2025): 2406. https://doi.org/10.3390/en18092406.

Full text
Abstract:
Under high-rate charging and discharging conditions, the coupling of phase change materials (PCMs) with liquid cooling proves to be an effective approach for controlling battery pack operating temperature and performance. To address the inherent low thermal conductivity of PCM and enhance heat transfer from PCM to cooling plates, numerical simulations were conducted to investigate the effects of installing fins between the upper and lower cooling plates on temperature distribution. The results demonstrated that merely adding cooling plates on battery surfaces and filling PCM in inter-cell gaps
APA, Harvard, Vancouver, ISO, and other styles
2

Sun, Jixian, Dan Dan, Mingshan Wei, Senlin Cai, Yihang Zhao, and Edward Wright. "Pack-Level Modeling and Thermal Analysis of a Battery Thermal Management System with Phase Change Materials and Liquid Cooling." Energies 16, no. 15 (2023): 5815. http://dx.doi.org/10.3390/en16155815.

Full text
Abstract:
Electric vehicles are seen as the prevailing choice for eco-friendly transportation. In electric vehicles, the thermal management system of battery cells is of great significance, especially under high operating temperatures and continuous discharge conditions. To address this issue, a pack-level battery thermal management system with phase change materials and liquid cooling was discussed in this paper. A dynamic electro-thermal coupled model for cells, the enthalpy–porosity model for phase change materials, and the k-ε model for the coolant flow were used. Various parameters, such as ambient
APA, Harvard, Vancouver, ISO, and other styles
3

Pandey, Amit Kumar, Raghav Sharma, Nikhil, et al. "Investigating the effect of coolant on cooling rate of engine oil used in automobile industry using Arduino interfaced temperature sensor." Physics Education 59, no. 2 (2024): 025026. http://dx.doi.org/10.1088/1361-6552/ad2558.

Full text
Abstract:
Abstract Heat is lost by the system due to temperature difference between the hot object and surroundings. Two models which explain cooling are conduction-convection method and radiation method. During an automobile engine operation, both engine and engine oil get heated up. To overcome the problem of excessive heat generated, coolant is used to cool down the system. In present study, cooling rate of engine oil kept at high temperature was studied in the absence and presence of coolant. In the absence of coolant, engine oil follows the natural law of cooling stated by Newton and follows the ex
APA, Harvard, Vancouver, ISO, and other styles
4

Yang, Tianqi, Shenglin Su, Qianqian Xin, et al. "Thermal Management of Lithium-Ion Batteries Based on Honeycomb-Structured Liquid Cooling and Phase Change Materials." Batteries 9, no. 6 (2023): 287. http://dx.doi.org/10.3390/batteries9060287.

Full text
Abstract:
Batteries with high energy density are packed into compact groups to solve the range anxiety of new-energy vehicles, which brings greater workload and insecurity, risking thermal runaway in harsh conditions. To improve the battery thermal performance under high ambient temperature and discharge rate, a battery thermal management system (BTMS) based on honeycomb-structured liquid cooling and phase change materials (PCM) is innovatively proposed. In this paper, the thermal characteristics of INR18650/25P battery are studied theoretically and experimentally. Moreover, the influence of structure,
APA, Harvard, Vancouver, ISO, and other styles
5

Sutanto, Marili Santi, and Anggun Dwi Lestari. "Fuzzy Logic-Based Feedwater Controller for the Super Fast Reactor." Journal of Physics: Conference Series 2866, no. 1 (2024): 012033. http://dx.doi.org/10.1088/1742-6596/2866/1/012033.

Full text
Abstract:
Abstract Super fast reactor is a Generation IV reactor with water coolant at supercritical pressure. It has advantages of having high efficiency of about 44%, more economical and excellent safety features. Its last core design which adopted one heating in one coolant cycle, however, results a large density change along the fuel channels. It leads to a sensitive steam temperature change against a change of power which might mismatch with the flow change. The sensitivity should be reduced to maintain the structure integrity of the reactor components. A feedwater controller which based on fuzzy l
APA, Harvard, Vancouver, ISO, and other styles
6

Ramdas, Dhiraj, and Tapobrata Dey. "Use of electronic viscous drive to optimize fan duty cycle." Engineering Research Express 4, no. 1 (2022): 015018. http://dx.doi.org/10.1088/2631-8695/ac5125.

Full text
Abstract:
Abstract The Electronic Viscous Fan Drive Clutch is one of the key components of cooling system in automotive sectors. It is more efficient than the current traditional bimetal operated Mechanical Viscous Fan Drive Clutch in terms of fan power consumption. The comparative change in fan power with both fan drives is studied and it is observed that with electronic fan clutch 86% reduction in fan power is achieved. In the current study an attempt is made to demonstrate the improvement in the cooling system in terms of ambient temperature of air and the coolant temperature. This is achieved throug
APA, Harvard, Vancouver, ISO, and other styles
7

Bucharskyi, V. L., and O. M. Ponomarov. "TO DETERMINATION THE FLOW PARAMETERS AT THE OUTLET OF THE COOLING CURTAIN OF THE LIQUID-PROPELLANT ROCKET ENGINE COMBUSTION CHAMBER." System design and analysis of aerospace technique characteristics 36, no. 1 (2025): 27–37. https://doi.org/10.15421/472503.

Full text
Abstract:
The design of liquid propellant rocket engines (LPREs) necessitates the efficient cooling of the combustion chamber walls. Despite the prevalence of regenerative cooling, it frequently proves inadequate, necessitating supplementary techniques such as the injection of coolant into the combustion chamber to establish a thermal barrier. A critical deficiency in the prevailing methodologies pertains to the absence of dependable methodologies for the calculation of the parameters governing coolant flow as it transitions from the cooling path to the curtain belt. The objective of this study is to de
APA, Harvard, Vancouver, ISO, and other styles
8

Zheng, Shuaishuai, Tingsong Yang, Tieheng Yuan, Wenquan Sun, Ankang Shen, and Shuo Fan. "Research on Temperature Change Law and Non-Uniform Distribution Characteristics of Electromagnetic Control Roll Based on Rotating Heat Flow." Machines 12, no. 10 (2024): 727. http://dx.doi.org/10.3390/machines12100727.

Full text
Abstract:
The uniform temperature distribution on the surface of the electromagnetic control roll (ECR) has a great impact on the quality of the strip; therefore, temperature control is essential. In order to study this issue, a two-dimensional volume of fluid (VOF) model was established using the simulation software FLUENT (2024 R1) to analyze the radial cooling capacity and surface temperature uniformity of the ECR under different process parameters, and an experimental validation was carried out at the same time. The error between the experiment and the model was less than 5% of the maximum temperatu
APA, Harvard, Vancouver, ISO, and other styles
9

Kirana, Yogyandini Mega, Purwono Sutopo Fitri, and Makoto Shibahara. "Thermal Performance of Immersion Cooling On Li-Ion Battery with Paraffin Wax-based Phase Change Material (PCM) under Ship Rolling and Pitching Angles." IOP Conference Series: Earth and Environmental Science 1461, no. 1 (2025): 012041. https://doi.org/10.1088/1755-1315/1461/1/012041.

Full text
Abstract:
Abstract Battery Thermal Management System (BTMS) onboard electric ships are crucial for optimising battery performance and longevity. By regulating the temperature, these systems ensure that batteries operate within safe limits, thus reducing the risk of thermal runaway. The present work aimed to determine the thermal performance of immersion cooling BTMS using paraffin wax-based PCM as a coolant on a LiFePo4 Li-Ion battery pack at discharging rates of 1C, 2C, and 3C. The immersion coolant rates were set to 30%, 50%, and 90%, and the inclination angles of the simulated ship’s pitching and rol
APA, Harvard, Vancouver, ISO, and other styles
10

Kruzel, Marcin, Tadeusz Bohdal, Krzysztof Dutkowski, and Mykola Radchenko. "The Effect of Microencapsulated PCM Slurry Coolant on the Efficiency of a Shell and Tube Heat Exchanger." Energies 15, no. 14 (2022): 5142. http://dx.doi.org/10.3390/en15145142.

Full text
Abstract:
This paper describes the results of experimental studies on heat transfer in a shell and tube heat exchanger during the phase changes of the HFE 7000 refrigerant. The studies were performed using a mixture of water and a microencapsulated phase change material as a coolant. HFE 7000 refrigerant condenses on the external surface of the copper tube, while a mixture of water and phase change materials flows through the channels as coolant. Currently, there is a lack of research describing cooling using phase change materials in heat exchangers. There are a number of publications describing the he
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Temperature change of coolant"

1

Rakkimuthu, Sathyaprabha. "Improved Thermoregulation Of Brain Temperature Using Phase Change Material-Mediated Head Cooling System." University of Cincinnati / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1613750048541054.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pedotto, Cristina. "Using IR thermography to determine the heat flux removed by spray cooling a high-temperature metallic surface." Thesis, Manhattan, Kan. : Kansas State University, 2008. http://hdl.handle.net/2097/1044.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Klein, Daniel R. "The electricity system vulnerability of selected European countries to climate change : A comparative analysis." Thesis, Linköpings universitet, Tema vatten i natur och samhälle, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-96598.

Full text
Abstract:
The electricity system is particularly susceptible to climate change due to the close interconnectedness between not only electricity production and consumption to climate, but also the interdependence of many European countries in terms of electricity imports and exports. This study provides a country based relative analysis of a number of selected European countries’ electricity system vulnerability to climate change. Taking into account a number of quantitative influencing factors, the vulnerability of each country is examined both for the current system and using some projected data. Ultim
APA, Harvard, Vancouver, ISO, and other styles
4

Bach, Aaron James Edward. "The evaluation of cooling systems to reduce heat strain in individuals wearing personal protective clothing." Thesis, Queensland University of Technology, 2020. https://eprints.qut.edu.au/200627/1/Aaron_Bach_Thesis.pdf.

Full text
Abstract:
Personal cooling systems, worn by emergency first responders under protective clothing, are designed to minimise the risk of heat illness. This thesis reaffirms that first responder agencies (e.g. fire, police) identify heat illness as a genuine threat to worker safety. Further, it identifies that certain personal cooling systems alleviate the heat better than others, and the combination of air temperature and humidity has a direct effect on their performance. Therefore, the use of cooling systems, by first responder agencies, needs to be considered in the context of the protective clothing be
APA, Harvard, Vancouver, ISO, and other styles
5

Сотник, Микола Іванович, Николай Иванович Сотник, Mykola Ivanovych Sotnyk та А. К. Черноброва. "Результати досліджень режиму чергового опалення приміщення". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/63200.

Full text
Abstract:
Нагальною проблемою впровадження режимів чергового опалення є надійна та достовірна методика визначення параметрів перехідного теплового процесу при опаленні приміщення. Наявні методи (навіть визначені у ДБН) не дають достатньо точного результату, бо не враховують у моделі перехідного процесу теплові ємності елементів приміщення (тепло акумулятори). Застосування числових моделей з використанням електричних методів аналізу теплового процесу дозволяє визначати термін часу перехідного процесу, граничні температури регулювання.
APA, Harvard, Vancouver, ISO, and other styles
6

He, Bo. "High-Capacity Cool Thermal Energy Storage for Peak Shaving - a Solution for Energy Challenges in the 21st century." Doctoral thesis, KTH, Chemical Engineering and Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3781.

Full text
Abstract:
<p>Due to climatic change, increasing thermal loads inbuildings and rising living standards, comfort cooling inbuildings is becoming increasingly important and the demand forcomfort cooling is expanding very quickly around the world. Theincreased cooling demand results in a peak in electrical powerdemand during the hottest summer hours. This peak presents newchallenges and uncertainties to electricity utilities and theircustomers.</p><p>Cool thermal storage systems have not only the potential tobecome one of the primary solutions to the electrical powerimbalance between production and demand,
APA, Harvard, Vancouver, ISO, and other styles
7

NADELLA, Venkata Raghurama Swaroop. "CFD Simulation of MQL with low temperature and high-pressure coolant." Thesis, KTH, Industriell produktion, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-244417.

Full text
Abstract:
Att använda stora mängder skärvätskor vid en bearbetningsprocess har potentiellt negativ inverkan inte bara för operatören men också på miljön. Utöver detta tillkommer ökade kostnader för tillverkningsprocessen. För att minska skärvätskekonsumtionen under maskinbearbetning införs en teknik som kallas minimalsmörjning(MQL=Minimum Quantity Lubrication) som använder mycket mindre mängd skärvätska men ändå är effektivare än standard kylspolning med skärvätska. Denna avhandling fokuserar på att bestämma konvektionen över ett skär med en konstant värmekälla placerad inuti ett kvadratiskt hölje och b
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Chunde. "Creation of hot summer years and evaluation of overheating risk at a high spatial resolution under a changing climate." Thesis, University of Bath, 2017. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.725405.

Full text
Abstract:
It is believed that the extremely hot European summer in 2003, where tens of thousands died in buildings, will become the norm by the 2040s, and hence there is the urgent need to accurately assess the risk that buildings pose. Thermal simulations based on warmer than typical years will be key to this. Unfortunately, the existing warmer than typical years, such as probabilistic Design Summer Years (pDSYs) are not robust measures due to their simple selection method, and can even be cooler than typical years. This study developed two new summer reference years: one (pHSY-1) is suitable for asses
APA, Harvard, Vancouver, ISO, and other styles
9

Durkee, Nicholas A. "Temperature Robust Longwave Infrared Hyperspectral Change Detection." Wright State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=wright1547481549821121.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pack, Jessica Spencer. "Effect of Localized Temperature Change on Vigilance Performance." Wright State University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=wright1429286666.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Temperature change of coolant"

1

Ballard, Carol. Heating and cooling. Heinemann Library, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Garg, Vijay Kumar. Effect of coolant temperature and mass flow on film cooling of turbine blades. National Aeronautics and Space Administration, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

National Research Council (U.S.). Panel on Reconciling Temperature Observations. Reconciling observations of global temperature change. National Academy Press, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Betney, Simon. Corneal temperature change during photorefractive keratectomy. UMIST, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hamburg, Steven P. Common questions about climate change. United Nations Environment Programme, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Koenker, Roger. Quantile regression models for global temperature change. University of Illinois at Urbana-Champaign, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lins, Harry F. Global Change Hydrology Program. U.S. Geological Survey, U.S. Dept. of the Interior, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bloom, Arnold J. Global climate change: Convergence of disciplines. Sinauer Associates, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bloom, Arnold J. Global climate change: Convergence of disciplines. Sinauer Associates, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Pilkey, Orrin H. Global climate change: A primer. Duke University Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Temperature change of coolant"

1

Liu, Ruirui, Xiaomei Kou, Wei Song, and Chuang Dong. "Evolution Laws and Spatial Differentiation Characteristics of Climate and Extreme Climate Before and After the Impoundment of the Three Gorges Reservoir." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-9184-2_39.

Full text
Abstract:
AbstractHuman-induced climate change has affected weather and extreme climate events, the Three Gorges Hydropower Project is the largest hydropower project in the world, which must inevitably have some impacts on the regional climate and extreme climate. Based on the data of precipitation, temperature, sunshine hours, relative humidity, minimum temperature and maximum temperature of 14 meteorological stations in the study area for 59 years from 1961 to 2019, this paper adopts the climate tendency rate, Mann-Kendall test, ordered clustering method, Kriging difference method to analyze the clima
APA, Harvard, Vancouver, ISO, and other styles
2

Stefaniak, Paweł, Paweł Śliwiński, Paula Poczynek, Agnieszka Wyłomańska, and Radosław Zimroz. "The Automatic Method of Technical Condition Change Detection for LHD Machines - Engine Coolant Temperature Analysis." In Applied Condition Monitoring. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-11220-2_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lu, Jinbin, Lifeng Zheng, Feng Chen, Liang Yang, and Qiang Zhang. "Experimental Study on Physical and Mechanical Characteristics and Microstructure of Sandstone After High Temperature-Water Cooling Treatment." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4090-1_27.

Full text
Abstract:
AbstractIn geothermal energy development, high-temperature rock mass will go through the process of water cooling. It is of great significance to study the physical and mechanical characteristics and microstructure of high-temperature rock after water cooling for the long-term stability analysis of underground engineering. Based on this, the surface characteristics, mass, and volume variation of sandstone cooled by water at high temperatures (100, 200, 400, 600, 800, and 1000 °C) were investigated. Using the Rock Top multifield coupling tester, a series of axial compressions and longitudinal w
APA, Harvard, Vancouver, ISO, and other styles
4

Zorita, Eduardo, Birgit Hünicke, Nele Tim, and Matthieu Rouault. "Past Climate Variability in the Last Millennium." In Sustainability of Southern African Ecosystems under Global Change. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-10948-5_5.

Full text
Abstract:
AbstractWe review our knowledge of the climate variability in southern Africa over the past millennium, based on information provided by proxy data and by climate simulations. Since proxy data almost exclusively record past temperature and/or precipitation, the review is focused on those two variables. Proxy data identify three thermal phases in the region: a medieval warm period around year 1000 CE (common era), a Little Ice Age until about the eighteenth century, and a clear warming phase since that temperature minimum until the present period. Variations of precipitation are different in th
APA, Harvard, Vancouver, ISO, and other styles
5

Chihab, Yassine. "Thermal Performance Improvement of Hollow Fired Clay Bricks Embedding Phase Change Materials." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4355-1_53.

Full text
Abstract:
AbstractThe construction industry in Morocco constitutes a substantial share, surpassing 33%, of the total energy consumption in the country, positioning it as one of the industries with the highest energy intensity. In spite of its considerable impact on energy consumption, the architectural design of buildings in Morocco frequently overlooks essential aspects such as the time lag and decrement factor linked to walls. This work aimed to examine the influence of incorporating phase change materials (PCMs) with three distinct melting temperatures on the dynamic thermal characteristics of bricks
APA, Harvard, Vancouver, ISO, and other styles
6

Rentala, Girish Srivatsa, and Yimin Zhu. "Investigating the Ability of Immersive Virtual Environments to Facilitate Occupant Thermal State Data Collection Involving Face Masks." In CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality. Firenze University Press, 2023. http://dx.doi.org/10.36253/10.36253/979-12-215-0289-3.10.

Full text
Abstract:
This study examines the capability of an immersive virtual environment (IVE–based) experimental protocol to support occupant thermal state (sensation, acceptability, and comfort) data collection when participants wear face masks. Specifically, the goal is to see if there is a change in local thermal states due to face covering and would such a change affect overall thermal states. A between-subject experiment was conducted with fifty-four participants (27 masked; 27 unmasked) who were exposed to three-step temperatures (18.3ºC, 23.8ºC, and 29.4ºC) in a climate chamber under both cooling and he
APA, Harvard, Vancouver, ISO, and other styles
7

Rentala, Girish Srivatsa, and Yimin Zhu. "Investigating the Ability of Immersive Virtual Environments to Facilitate Occupant Thermal State Data Collection Involving Face Masks." In CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality. Firenze University Press, 2023. http://dx.doi.org/10.36253/979-12-215-0289-3.10.

Full text
Abstract:
This study examines the capability of an immersive virtual environment (IVE–based) experimental protocol to support occupant thermal state (sensation, acceptability, and comfort) data collection when participants wear face masks. Specifically, the goal is to see if there is a change in local thermal states due to face covering and would such a change affect overall thermal states. A between-subject experiment was conducted with fifty-four participants (27 masked; 27 unmasked) who were exposed to three-step temperatures (18.3ºC, 23.8ºC, and 29.4ºC) in a climate chamber under both cooling and he
APA, Harvard, Vancouver, ISO, and other styles
8

Kumar, Manish, and S. K. Dhakad. "Diesel Engine Performance with Coolant Temperature Control System and Phase Change Material (PCM) in the Cold Ambient Conditions: A Review." In Algorithms for Intelligent Systems. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-6707-0_50.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Qiling, Jiaolong Zhang, Peng Xiao, Xi Chen, Eddie Koenders, and Yong Yuan. "Temperature-Dependent Dual-Operation Mode for Energy Tunnel Integrated with Phase-Change Materials in Geothermal Environment." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_39.

Full text
Abstract:
AbstractThe exploration and harnessing of thermal energy in geothermal tunnels have gradually emerged as a new research topic. This study employs concrete modified with phase-change materials (PCMs) as a pivotal material for geothermal energy tunnels and introduces a temperature-dependent dual-operation mode. The system, functioning in a dual-operation mode of cooling and storage, facilitates adjustment of the tunnel temperature field and extraction of geothermal energy. A comprehensive multi-field coupled finite element model is established, simulating the energy tunnel with PCMs under the pr
APA, Harvard, Vancouver, ISO, and other styles
10

Zhou, Xinchen. "Thermal Metamaterials for Temperature Maintenance: From Advances in Heat Conduction to Future Convection Prospects." In Diffusionics. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-0487-3_10.

Full text
Abstract:
AbstractMaintaining temperature is crucial in both daily life and industrial settings, ensuring human comfort and device functionality. In the quest for energy conservation and emission reduction, several contemporary passive temperature control technologies have emerged, including phase change temperature control, shape memory alloys, solar thermal utilization, sky radiation cooling, and heat pipe systems. However, there is a pressing need for more quantitative methods to further optimize temperature maintenance. With advancements in theoretical thermotics and the emergence of thermal metamat
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Temperature change of coolant"

1

Yang, L., X. Sun, and F. Steward. "An on-Line Electrical Resistance Corrosion Monitor for Studying Flow Assisted Corrosion of Carbon Steel under High-Temperatue and High-Pressure Conditions." In CORROSION 1999. NACE International, 1999. https://doi.org/10.5006/c1999-99459.

Full text
Abstract:
Abstract An in-situ corrosion rate monitor using a carbon steel tube, a carbon steel rod or a carbon steel wire as the sensing element has been developed. The monitor was tested both in an inert system at room temperature and in a high-temperature and high-pressure loop with LiOH solution. Experimental results from the room temperature tests showed that the calculated corrosion rate or thinning rate based on the resistance signal of the carbon steel sensing element agreed well with the measured values. Experimental results from the high-temperature tests showed that the corrosion monitor respo
APA, Harvard, Vancouver, ISO, and other styles
2

Sabharwall, Piyush, Mike Patterson, Vivek Utgikar, and Fred Gunnerson. "NGNP Process Heat Utilization: Liquid Metal Phase Change Heat Exchanger." In Fourth International Topical Meeting on High Temperature Reactor Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/htr2008-58197.

Full text
Abstract:
One key long-standing issue that must be overcome to fully realize the successful growth of nuclear power is to determine other benefits of nuclear energy apart from meeting the electricity demands. The Next Generation Nuclear Plant (NGNP) will most likely be producing electricity and heat for the production of hydrogen and/or oil retrieval from oil sands and oil shale to help in our national pursuit of energy independence. For nuclear process heat to be utilized, intermediate heat exchange is required to transfer heat from the NGNP to the hydrogen plant or oil recovery field in the most effic
APA, Harvard, Vancouver, ISO, and other styles
3

Young, Jonathan, Jingru Benner, and Anthony D. Santamaria. "Fluid Properties of Microencapsulated Phase Change Material Slurries." In ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/fedsm2018-83170.

Full text
Abstract:
Electrochemical energy conversion and storage devices are becoming a large part of the renewable energy market. For these systems to operate optimally over a wide range of operating and environmental conditions, advanced strategies for thermal management must be developed. Incorporating microencapsulated phase change materials (MEPCM), which utilize latent heat storage, into coolant fluids has been shown to increase the fluid’s thermal capacity. This mitigates the temperature gradient between the coolant loop inlet and outlet which is important in systems such as fuel cells and batteries where
APA, Harvard, Vancouver, ISO, and other styles
4

Kuo, Hsin-Yu, Kevin Meyer, Roger Lindle, and Jun Ni. "Estimation of Milling Tool Temperature Considering Coolant and Wear." In ASME 2011 International Manufacturing Science and Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/msec2011-50218.

Full text
Abstract:
This paper presents a novel technique to estimate the temperature distribution of a milling tool during machining. In this study, heat generation during the machining process is estimated using cutting forces. We consider the heat to be time-dependent heat flux into the tool. In the proposed model, we discretize each rake face on a mill into several elements; each experiences time-dependent heat flux. Second, we approximate the time-dependent heat flux as several constant heat input starts at different time. Finally, we sum the temperature rise from each heat flux to obtain the overall tempera
APA, Harvard, Vancouver, ISO, and other styles
5

Qin, Jie, Qingmu Xu, Junkai Yuan, and Kun Cai. "Flow Field Analysis of the Reactor Coolant Pump Internal Cooling Circulation." In 2017 25th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/icone25-67179.

Full text
Abstract:
Reactor coolant pump (RCP) is one of the most critical devices in third generation of pressurized water reactor nuclear power plant. EMD shield pump and KSB wet winding pump are two representative kinds of RCPs without complex shaft seal system. Due to cancellation of shaft seal system, the entire rotors (including the flywheel) are immersed in the coolant. The losses in RCPs take one third of the total power including rotation loss caused by rotor in the water, electromagnetic loss in the shielding sleeve,the heat transferred through high temperature coolant, and heat generated by bearing.Bec
APA, Harvard, Vancouver, ISO, and other styles
6

Abdul Husain, R. A. A., and G. E. Andrews. "Full Coverage Impingement Heat Transfer at High Temperatures." In ASME 1990 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1990. http://dx.doi.org/10.1115/90-gt-285.

Full text
Abstract:
Transient cooling techniques were developed for the direct simultaneous measurement of full coverage multi-jet impingement heat transfer coefficient and cooling effectiveness under high temperature combustion convective wall heating conditions. A step change in the impingement coolant flow rate was made and the change in temperature recorded as a function of time, from which the heat transfer coefficient was calculated. A comparison between steady state and transient techniques was also made on a conventional low temperature electrically heated test facility and good agreement was found. There
APA, Harvard, Vancouver, ISO, and other styles
7

Xiang, Xinrui, Ruibo Yang, Ramaswamy Nagarajan, and Hongwei Sun. "A New Battery Thermal Management System With Integrated Phase Change Materials and Cold Plate: A Numerical Study." In ASME 2022 Heat Transfer Summer Conference collocated with the ASME 2022 16th International Conference on Energy Sustainability. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/ht2022-81860.

Full text
Abstract:
Abstract Lithium-ion battery (LIB), as a renewable energy storage device has received considerable attention in recent years for its zero-emission, long life, and high energy density. However, the performance, lifespan, and safety of the LIB systems are greatly affected by their operation and storage temperatures. To ensure the batteries to work in the optimum temperature range, various battery thermal management systems (TMS) have been investigated. This research focuses on the numerical study of the thermal performance of a hybrid battery cooling system which consists of an integrated forced
APA, Harvard, Vancouver, ISO, and other styles
8

Colvin, David P., Virginia S. Colvin, Yvonne G. Bryant, Ray A. Whitney, Jamal Y. Sheikh-Ahmad, and John A. Bailey. "Development of a MicroPCM Machine Coolant." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1911.

Full text
Abstract:
Abstract Under multiple SBIR (Small Business Innovation Research) programs from the Department of Defense, NASA and the National Science Foundation, investigators at Triangle Research and Development Corporation (TRDC) and associated universities have conducted research toward the development of a new machine coolant that has demonstrated some significant advantages. Results in SBIR programs for NASA, USAF and NAVY, that were reported in earlier publications, have indicated that both aqueous and non-aqueous two-component coolants containing microencapsulated phase change materials (microPCMs)
APA, Harvard, Vancouver, ISO, and other styles
9

Baldock, Matthew, Wargha Peiman, Andrei Vincze, Rand Abdullah, Khalil Sidawi, and Igor Pioro. "Neutronics Studies on a Generic Pressure-Channel Reactor With Nuclear Steam Superheat." In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-30135.

Full text
Abstract:
In order to increase the thermal efficiency of steam-cycle power plants it is necessary to achieve steam temperatures as high as possible. Current limiting factor for Nuclear Power Plants (NPPs) in achieving higher operating temperatures and, therefore, thermal efficiencies is pressures at which they can operate. From basic thermodynamics it is known that to increase further an outlet temperature in water-cooled reactors a pressure must also be increased. Current level of pressures in Pressurized Water Reactors (PWRs) is about 15–16 MPa. Therefore, next stage should be supercritical pressures,
APA, Harvard, Vancouver, ISO, and other styles
10

Zichao, Li, Zhou Tao, Zhou Lanyu, Liu Liang, Chen Juan, and Yu Hongxing. "Thermo-Hydraulic Research for Supercritical Water Reactor During Power-Raising Phase of Startup." In 2017 25th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/icone25-67595.

Full text
Abstract:
Thermal characteristics during startup of CSR1000 are directly related to the security of supercritical water reactors. The heat transfer model during power-raising phase is built according to the sliding pressure mode of CSR1000 and thermal characteristics of coolant and moderator are analyzed. The results show that, during the temperature-raising phase of startup, Coolant and moderator temperatures in inner assemblies increase with core power increase only. With increases of core power and feed-water flow rate, Coolant and moderator temperatures remain unchanged during power-raising phase. T
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Temperature change of coolant"

1

Stamatiou, Anastasia, Rebecca( Ravotti, Andreas König-Haagen, Christoph Rathgeber, Maike Johnson, and Annelies Vandersickel. Definition of boundary conditions for industrial applications and industrial Peak Shaving. IEA SHC Task 58, 2018. http://dx.doi.org/10.18777/ieashc-task58-2024-0002.

Full text
Abstract:
The aim of this project is to find materials and possibilities that allow thermal storage at temperatures in the range of 8 to 15 ° C (PCM8-15) and 50 ° C (PCM50) in addition to today's ice storage. Ice storage for storing latent heat for cooling purposes are now operated with water. For new applications in the field of air conditioning and heating, a higher temperature level is exergetically much cheaper. Based on the PCM with the phase transition temperature of 50 ° C, the storage density can be achieved in the useful hot water storage. This reduces the storage space of the thermal energy st
APA, Harvard, Vancouver, ISO, and other styles
2

Graves, W. E. Revised Mark 22 coolant temperature coefficients. Office of Scientific and Technical Information (OSTI), 1987. http://dx.doi.org/10.2172/10155735.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Johra, Hicham. Performance overview of caloric heat pumps: magnetocaloric, elastocaloric, electrocaloric and barocaloric systems. Department of the Built Environment, Aalborg University, 2022. http://dx.doi.org/10.54337/aau467469997.

Full text
Abstract:
Heat pumps are an excellent solution to supply heating and cooling for indoor space conditioning and domestic hot water production. Conventional heat pumps are typically electrically driven and operate with a vapour-compression thermodynamic cycle of refrigerant fluid to transfer heat from a cold source to a warmer sink. This mature technology is cost-effective and achieves appreciable coefficients of performance (COP). The heat pump market demand is driven up by the urge to improve the energy efficiency of building heating systems coupled with the increase of global cooling needs for air-cond
APA, Harvard, Vancouver, ISO, and other styles
4

Jung. L52232 Weld Metal Cooling Rate Prediction of Narrow Groove Pipeline Girth Welds FEA Modeling. Pipeline Research Council International, Inc. (PRCI), 2008. http://dx.doi.org/10.55274/r0011321.

Full text
Abstract:
As part of a larger, DoT-sponsored program to develop optimized weld metal chemistries for X80 and X100, a finite-element approach was used to predict weld metal cooling rates and to provide a better understanding of the factors which influence them. The models can then be used to predict how changes in the welding procedure will affect the cooling rates of the weld joints. The changes in the welding procedure can include the joint details, the heat input of the weld as well as the preheating temperature. The predicted cooling rate from the model will be used as input, along with the weld meta
APA, Harvard, Vancouver, ISO, and other styles
5

Beshouri. PR-309-04200-R01 Modeling Methodology for Parametric Emissions Monitoring System for Combustion Turbines. Pipeline Research Council International, Inc. (PRCI), 2005. http://dx.doi.org/10.55274/r0010731.

Full text
Abstract:
Prior attempts to develop a generic Parametric Emissions Monitoring methodology for combustion turbines, particularly low emissions units, have failed due either to the reduction of a complex problem to too few degrees of freedom or the brute force reliance on regression analysis. Field test data collected by the research team clearly illustrated that a successful PEMS model will need to incorporate multiple zones to account for pilot fuel versus pre-mixed combustion, and changes in air/fuel ratio at the flame front. The information reported herein shows that, ideally, the PEMS model should re
APA, Harvard, Vancouver, ISO, and other styles
6

Turner, R. J. W., and J. J. Clague. Temperature rising - climate change in southwestern British Columbia. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1999. http://dx.doi.org/10.4095/210905.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wagoner, Barbara A. Change in Muzzle Velocity due to a Change in Propellant Temperature for Small Arms Ammunition. Defense Technical Information Center, 1990. http://dx.doi.org/10.21236/ada221155.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zivin, Joshua Graff, and Matthew Neidell. Temperature and the Allocation of Time: Implications for Climate Change. National Bureau of Economic Research, 2010. http://dx.doi.org/10.3386/w15717.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bilal, Adrien, and Diego Känzig. The Macroeconomic Impact of Climate Change: Global vs. Local Temperature. National Bureau of Economic Research, 2024. http://dx.doi.org/10.3386/w32450.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Malm, Therese. Energy use and indoor climate in livestock buildings for pigs : an introductory paper. Faculty of Landscape Architecture, Horticulture and Crop Production Science, Swedish University of Agricultural Sciences, 2024. http://dx.doi.org/10.54612/a.5tt5942kdj.

Full text
Abstract:
Swedish pig farming is facing two climatic challenges: minimizing greenhouse gases and adapting to warmer climates in confined livestock buildings. Climate change leads to more heat waves, causing pigs in confined buildings to endure heat stress more often and for longer periods. Heat stress not only affects the animals' welfare and health negatively, but it also implies a risk of economic losses for farmers, as heat stress can result in slower growth, impacts on reproduction and increased mortality. Pigs are particularly sensitive to heat because they do have few sweat glands. This introducto
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Temperature change of coolant' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography