To see the other types of publications on this topic, follow the link: Tempered iron.

Journal articles on the topic 'Tempered iron'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Tempered iron.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Stolypinsky, V. "Tempered iron in gynecology." Journal of obstetrics and women's diseases 5, no. 4 (2020): 247–67. http://dx.doi.org/10.17816/jowd54247-267.

Full text
Abstract:
Mm. Gg. Modern surgeons in general, and in particular, gynecological surgeons strive to simplify as much as possible, both the methods of operation, the very instruments and postoperative care of patients, based on the point of view that the success of the principle of deprivation most of depends on strict observance.
APA, Harvard, Vancouver, ISO, and other styles
2

Hu, Zhitao, Chen Liu, Yuzhou Du, Xin Wang, Xinyu Zhu, and Bailing Jiang. "Effects of Tempering Temperature on Mechanical and Tribological Behavior of Ductile Iron." Lubricants 10, no. 12 (2022): 326. http://dx.doi.org/10.3390/lubricants10120326.

Full text
Abstract:
The mechanical properties and tribological behavior of ductile iron tempered at different temperatures were investigated. The tempered sample was composed of spheroidal graphite, α phase, and carbides. The strength and hardness decreased near-linearly but the plasticity increased with the increase of tempering temperature, which was mainly because carbon atoms precipitated from martensite and thus reduced the distortion of martensite. Wear tests indicated that the friction coefficient of the sample tempered at 420 °C decreased first and then increased with the increasing loads and exhibited th
APA, Harvard, Vancouver, ISO, and other styles
3

Abdullah, Bulan, Siti Khadijah Alias, Ahmed Jaffar, Abdul Hakim Abdullah, Syazuan Abdul Latip, and Mohd Faizul Idham. "Mechanical Properties of Tempered Ti-Nb Alloyed Ductile Iron." Applied Mechanics and Materials 393 (September 2013): 126–29. http://dx.doi.org/10.4028/www.scientific.net/amm.393.126.

Full text
Abstract:
The applications of ductile iron in numerous engineering applications require continuous effort in properties enhancement due to the necessity of product sustainability and performance. The studies highlighted the effect of 0.5 wt% titanium and niobium addition the mechanical properties of tempered ductile iron. The samples were prepared through conventional CO2 sand casting process. Heat treatment was conducted by austenitizing at 900°C for 1 hour and subsequently oil quenching before tempered at three different temperatures which are 500°C, 600°C and 700°C at 1 hour holding time. The mechani
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Bingxu, Gary C. Barber, Rui Wang, and Yuming Pan. "Comparison of Wear Performance of Austempered and Quench-Tempered Gray Cast Irons Enhanced by Laser Hardening Treatment." Applied Sciences 10, no. 9 (2020): 3049. http://dx.doi.org/10.3390/app10093049.

Full text
Abstract:
The current research studied the effects of laser surface hardening treatment on the phase transformation and wear properties of gray cast irons heat treated by austempering or quench-tempering, respectively. Three austempering temperatures of 232 °C, 288 °C, and 343 °C with a constant holding duration of 120 min and three tempering temperatures of 316 °C, 399 °C, and 482 °C with a constant holding duration of 60 min were utilized to prepare austempered and quench-tempered gray cast iron specimens with equivalent macro-hardness values. A ball-on-flat reciprocating wear test configuration was u
APA, Harvard, Vancouver, ISO, and other styles
5

Santos, H., A. Duarte, and J. Seabra. "Austempered ductile iron with tempered martensite." International Journal of Cast Metals Research 15, no. 2 (2002): 117–24. http://dx.doi.org/10.1080/13640461.2002.11819470.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yang, Chen, Xi Xi Cui, Zhen Bo Zhao, Gao Hua, and Cheng Liu. "Role of Bulky Retained Austenite in Austempered Ductile Iron." Advanced Materials Research 1142 (January 2017): 19–22. http://dx.doi.org/10.4028/www.scientific.net/amr.1142.19.

Full text
Abstract:
In this investigation, the characteristics of bulky retained austenite in an austempered ductile iron are evaluated in two tempered conditions. which were intially tempered at 200oC for 1h before cooling to room temperature, and then tempered at 350oC for 1h. The result shows that the hardness within retained austenite areas is distributed unevenly with a range from 423 HV to 897 HV, which is attributed to the transformation from austenite to martensite during austempering. Also, the mechanism regarding the quenched marteniste formation is discussed. The poor fatigue resistance of ADI is hypot
APA, Harvard, Vancouver, ISO, and other styles
7

Kayali, Y., A. Büyüksağiş, and Y. Yalçin. "Corrosion behavior of boro-tempered ductile iron." Protection of Metals and Physical Chemistry of Surfaces 46, no. 3 (2010): 345–49. http://dx.doi.org/10.1134/s2070205110030093.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Aristizabal, R., R. Foley, and A. Druschitz. "Intercritically Austenitized Quenched and Tempered Ductile Iron." International Journal of Metalcasting 6, no. 4 (2012): 7–14. http://dx.doi.org/10.1007/bf03355534.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Bingxu, Gary C. Barber, Chuanlin Tao, Xue Han, and Xichen Sun. "Tribological Performance of Austempered and Tempered Ductile Iron." Metallurgical and Materials Transactions B 49, no. 5 (2018): 2261–69. http://dx.doi.org/10.1007/s11663-018-1338-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Hu, Guyue, Yi Ge, Tong Wu, et al. "Influence of Materials on Dry Friction and Wear Performance of Harmonic Reducer Circular Spline." Metals 13, no. 2 (2023): 378. http://dx.doi.org/10.3390/met13020378.

Full text
Abstract:
Ductile iron and alloy steel are mostly used as the circular spline materials of harmonic reducers. The study of the differences in wear resistance of different circular spline materials is a strong basis for the design of high-precision and long-life harmonic reducers. The dry friction behaviors under room temperature of two ductile iron (low-load SHF and high-load SHG) alloys and steel (40Cr) circular spline materials were studied with a quantitative analysis of the alloy composition, microstructure, hardness and wear resistance. The results showed that the microstructures of SHF, SHG and 40
APA, Harvard, Vancouver, ISO, and other styles
11

Kayali, Yusuf, Sukru Taktak, Sinan Ulu, and Yilmaz Yalcin. "Investigation of mechanical properties of boro-tempered ductile iron." Materials & Design 31, no. 4 (2010): 1799–803. http://dx.doi.org/10.1016/j.matdes.2009.11.017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
12

Kayali, Yusuf, Yılmaz Yalçin, and Şükrü Taktak. "Adhesion and wear properties of boro-tempered ductile iron." Materials & Design 32, no. 8-9 (2011): 4295–303. http://dx.doi.org/10.1016/j.matdes.2011.04.014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Akinlabi, Oyetunji, Barnabas A. A., and Adewara J.O. T. "Development of Martempered Ductile Iron by Step-Quenching Method in Warm Water." DIU Journal of Science & Technology 8, no. 2 (2024): 19–24. https://doi.org/10.5281/zenodo.13761599.

Full text
Abstract:
The evaluation of the suitability of warm water for interrupted quenching of ductile cast irons in the production of Martempered Ductile Iron (MDI) was carried out. Ductile cast irons used were normalized at a temperature of 850oC for 60 minutes. The normalized specimens were subsequently heat-treated in muffle furnace to a pre-determined temperature of 850oC for 30 minutes, then step-quenched in warm water maintained at temperature of 80oC for 40 seconds followed by tempering at different tempering temperatures (175oC-425oC) and times (30-180 minutes). Hardness test was used to evaluate the m
APA, Harvard, Vancouver, ISO, and other styles
14

Nawrocki, P., A. Kochański, and D. Myszka. "Statistical Assessment of the Impact of Elevated Contents of Cu and Ni on the Properties of Austempered Ductile Iron." Archives of Metallurgy and Materials 61, no. 4 (2016): 2147–50. http://dx.doi.org/10.1515/amm-2016-0342.

Full text
Abstract:
Abstract The article presents a statistical analysis of data collected from the observation of the production of austempered ductile iron. The impact assessment of the chemical composition, i.e. high contents of Cu and Ni on the properties of ductile iron isothermal tempered is critical to find the right chemical composition of austempered ductile iron. Based on the analyses range of the percentage of Cu and Ni which were selected in the cast iron to obtain material with high strength properties.
APA, Harvard, Vancouver, ISO, and other styles
15

Tekeli, Süleyman, Ahmet Güral, and Metin Gürü. "Influence of Tempering Temperature and Microstructure on Wear Properties of Low Alloy PM Steel with 1-2 % Ni Addition." Materials Science Forum 534-536 (January 2007): 629–32. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.629.

Full text
Abstract:
The effect of tempering temperature and microstructure on dry sliding wear behavior of quenched and tempered PM steels was investigated. For this purpose, atomized iron powder was mixed with 0.3 % graphite and 1-2 % Ni powders. The mixed powders were cold pressed and sintered at 1200°C. The sintered specimens were quenched from 890°C and then tempered at 200°C and 600°C for 1 hr. Wear tests were carried out on the quenched+tempered specimens under dry sliding wear conditions using a pin-on-disk type machine at constant load and speed. The experimental results showed that the wear coefficient e
APA, Harvard, Vancouver, ISO, and other styles
16

Kurita, Masanori, and Akira Saito. "Dependence of Stress Constant on Microstructure of Quenched and Tempered Steels in X-Ray Stress Measurement." Advances in X-ray Analysis 35, A (1991): 519–25. http://dx.doi.org/10.1154/s0376030800009204.

Full text
Abstract:
AbstractThe residual stress measurement of quenched and tempered steels is of practical importance because the quenching can sometimes induce the high residual stress which affects the strength of materials. The stress constants of carbon steels quenched and tempered at various temperatures were measured in order to determine the residual stress of steels by x-ray diffraction. The stress constant increased slowly with increasing tempering temperatures below 500°C; it increased rapidly with tempering temperatures above about 500°C, This rapid increase in the stress constant is closely related t
APA, Harvard, Vancouver, ISO, and other styles
17

Abdullah, Bulan, Khalissah Yusof, Farahn Zamri, Nor, and Hayati Saad. "The Effects of Austempered and Quenched & Tempered on Mechanical Properties of Alloyed Grey Cast Iron." International Journal of Engineering & Technology 7, no. 4.12 (2018): 376. http://dx.doi.org/10.14419/ijet.v7i4.12.21973.

Full text
Abstract:
In this study, the effects of austempered and quenched & tempered on mechanical properties of grey cast iron with and without the addition of niobium were investigated. The austempering heat treatment started by heating the samples to an austenitizing temperature of 900°C with a soaking time of 90 minutes before quenched in salt bath furnace with a temperature of 360°C and hold for 180 minutes before it been cooled down to room temperature. The quench and tempering process started with heating the samples at 910°C and hold for 33 minutes. Then the samples are quenched by using engine oil b
APA, Harvard, Vancouver, ISO, and other styles
18

Martin, Mario A. S., Adi Eliyahu-Behar, Michael Anenburg, Yuval Goren, and Israel Finkelstein. "Iron IIA slag-tempered pottery in the Negev Highlands, Israel." Journal of Archaeological Science 40, no. 10 (2013): 3777–92. http://dx.doi.org/10.1016/j.jas.2013.04.024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Purba, Riki Hendra, Kenta Kusumoto, Kazumichi Shimizu, Yila Gaqi, and Mohammad Jobayer Huq. "Influence of Tempering Temperature on Abrasive-Wear Performance of High-Chromium-Based Multicomponent White Cast Iron." Lubricants 11, no. 7 (2023): 285. http://dx.doi.org/10.3390/lubricants11070285.

Full text
Abstract:
Recently, high-Cr multicomponent white cast iron after quenching is known to have superior abrasive-wear resistance. However, this material is prone to cracking due to the precipitation of very hard carbides resulting in very limited application. However, the cracking tendency might be reduced by appropriate tempering temperature. Therefore, the three-body abrasive-wear resistance of 18 wt.% and 27 wt.% Cr based on 3 wt.% Mo, W, V, and Co with different temperatures of tempering was studied. These are abbreviated as 18Cr MCCI and 27Cr MCCI. The tempering temperature range was 653–813 K with an
APA, Harvard, Vancouver, ISO, and other styles
20

Yu, Chieh, Ta Chien Cheng, Ren Kae Shiue, Tze Ching Yang, and Ching Yuan Huang. "Microstructural Observations of the Direct Quenched Offshore Steel." Key Engineering Materials 732 (March 2017): 55–58. http://dx.doi.org/10.4028/www.scientific.net/kem.732.55.

Full text
Abstract:
The purpose of this investigation is focused on the direct quench and temper mechanisms of the high strength offshore steel. Microstructural analyses of martensite and retained austenite in the direct quenched steel, simulations of martensitic transformation temperatures, Ms/Mf, and morphologies of bainite and ferrite have been evaluated in the experiment. Additionally, carbide formation after temped at various temperatures and microhardness depth profiles after heat treating are also included in the study. The direct quenched steel is primarily comprised of martensite, bainite and a few retai
APA, Harvard, Vancouver, ISO, and other styles
21

Rajneesh, Yadav*1 Dr Lokendra Pal Singh2 &. Romiyo Mclin Jojowar3. "EXPERIMENTAL STUDY ON THE EFFECT OF HEAT TREATMENT ON THE PROPERTIES OF DUCTILE IRON AFTER ALLOYING." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 10 (2017): 142–51. https://doi.org/10.5281/zenodo.1002677.

Full text
Abstract:
Cast Iron, the first man – made composite, is at least 2500 year old. It remains the most important casting material, with over 70 % of the total world tonnage. The man for cast iron longevity are its wide range of mechanical and physical properties coupled with its competitive price. Ductile iron or popularly known as spherodized graphite iron (SGiron) is a special variety of cast iron having carbon content more than 3 % and has graphite present in compact, spherical shapes. These compact spheroid hamper the continuity of the matrix much less than graphite flakes which results in higher stren
APA, Harvard, Vancouver, ISO, and other styles
22

Takayama, Riku, Izumi Muto, Masashi Nishimoto, Haruka Sato, and Yu Sugawara. "(Digital Presentation) The Effect of Phosphorus on the Mechanism of Pitting Initiation in Carbon Steel." ECS Meeting Abstracts MA2022-02, no. 64 (2022): 2344. http://dx.doi.org/10.1149/ma2022-02642344mtgabs.

Full text
Abstract:
Phosphorus is typical impurity in steelmaking process. Phosphorus was tended to segregate at grain boundaries. Phosphorus segregation causes solidification clacking at welding and defects at forming. In the steel making process, Phosphorus cannot refine completely. We focused on the effect of phosphorus segregation and precipitation to corrosion resistance. Phosphorus in steel was expected solid solution, segregation, and precipitation and the size was submicron order. Therefore, we need microelectrochemical measurements to analysis. Solid solution carbon was improved corrosion resistance was
APA, Harvard, Vancouver, ISO, and other styles
23

Mu, Dong, and Bao-luo Shen. "The Kinetics and Dry-Sliding Wear Properties of Boronized Gray Cast Iron." Advances in Materials Science and Engineering 2013 (2013): 1–7. http://dx.doi.org/10.1155/2013/751971.

Full text
Abstract:
Some properties of boride formed on gray cast iron (GCI) have been investigated. GCI was boronized by powder-pack method using Commercial LSB-II powders at 1123, 1173, and 1223 K for 2, 4, 6, and 8 h, respectively. Scanning electron microscopy showed that boride formed on the surface of boronized GCI had tooth-shaped morphology. The hardness of boride formed on surfaces of GCI ranged from 1619 to 1343 HV0.025, and quenched and tempered GCI ranged from 400 to 610 HV0.025. The boride formed in the coating layer confirmed by X-ray diffraction analysis was Fe2B single phase. Depending on boronizin
APA, Harvard, Vancouver, ISO, and other styles
24

Wang, Bingxu, Xue Han, Gary C. Barber, and Yuming Pan. "Wear Behavior of Austempered and Quenched and Tempered Gray Cast Irons under Similar Hardness." Metals 9, no. 12 (2019): 1329. http://dx.doi.org/10.3390/met9121329.

Full text
Abstract:
In this research, an austempering heat treatment was applied on gray cast iron using various austempering temperatures ranging from 232 °C to 371 °C and holding times ranging from 1 min to 120 min. The microstructure and hardness were examined using optical microscopy and a Rockwell hardness tester. Rotational ball-on-disk sliding wear tests were carried out to investigate the wear behavior of austempered gray cast iron samples and to compare with conventional quenched and tempered gray cast iron samples under equivalent hardness. For the austempered samples, it was found that acicular ferrite
APA, Harvard, Vancouver, ISO, and other styles
25

Lin, Z., L. Jin, J. Chen, et al. "Revealing the strength and toughness mechanisms of ductile iron in three heat‐treatment processes." Materialwissenschaft und Werkstofftechnik 55, no. 4 (2024): 417–26. http://dx.doi.org/10.1002/mawe.202300210.

Full text
Abstract:
AbstractMicrostructural characteristics and mechanical properties of the ductile iron in three heat treatment processes (normalizing, quenching + high‐temperature tempering and isothermal quenching) were investigated in this paper. The pearlite and ferrite with large‐sized spherical graphites can be obtained in the normalized sample, and the spherical graphites with relatively large size can still be observed in the mechanical mixture of tempered martensite and acicular ferrite for the quenched‐tempered sample. Meanwhile, the lower bainite accompanied with the relatively fine spherical graphit
APA, Harvard, Vancouver, ISO, and other styles
26

Stilborg, Ole. "Temper for the sake of coherence: Analyses of bone- and chaff-tempered ceramics from Iron Age Scandinavia." European Journal of Archaeology 4, no. 3 (2001): 398–404. http://dx.doi.org/10.1179/eja.2001.4.3.398.

Full text
Abstract:
Temper is an essential element in pottery making in many parts of the world and in large parts of prehistory. Furthermore, it readily lends itself to qualitative and quantitative study without advanced equipment. Since all non-plastic materials in theory may be used as temper, variations in the choice of type and quality (amount, grain size) are important indications of craft traditions, functional differences and contacts between different areas. Even other, more elusive considerations might lie behind the choice of temper. Like the bride who should wear something new, something old, somethin
APA, Harvard, Vancouver, ISO, and other styles
27

Stilborg, O. "Temper for the Sake of Coherence: Analyses of Bone- and Chaff-Tempered Ceramics from Iron Age Scandinavia." European Journal of Archaeology 4, no. 3 (2001): 398–404. http://dx.doi.org/10.1177/146195710100400316.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Chen, Zhengyang, Qiang Guo, Hanguang Fu, and Xiaohui Zhi. "Effect of heat treatment on microstructure and properties of modified hypereutectic high chromium cast iron." Materials Testing 64, no. 1 (2022): 33–54. http://dx.doi.org/10.1515/mt-2021-2010.

Full text
Abstract:
Abstract The effect of heat treatment on the microstructure, hardness and wear resistance of modified hypereutectic high chromium cast iron (HCCI) was investigated. The results show that the quenching treatment partially dissolves the edges of the primary carbides, and the sharp corners become rounded and blunt. As the quenching temperature increases, the carbide re-dissolves into the matrix, and the hardness and wear resistance first increase and then decrease. The hardness and wear resistance are the best when quenched at 1000 °C. After tempering, the martensite is transformed into tempered
APA, Harvard, Vancouver, ISO, and other styles
29

Mason, C. R., M. J. Worswick, and P. J. Gallagher. "Adiabatic Shear in Remco Iron and Quenched and Tempered 4340 Steel." Le Journal de Physique IV 07, no. C3 (1997): C3–827—C3–832. http://dx.doi.org/10.1051/jp4:19973140.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Bonadé, R., P. Spätig, M. Victoria, T. Yamamoto, and G. R. Odette. "Tensile properties of a tempered martensitic iron–chromium–carbon model alloy." Journal of Nuclear Materials 329-333 (August 2004): 278–82. http://dx.doi.org/10.1016/j.jnucmat.2004.04.054.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Chagas Rodrigues de Souza, Felipe, and Leonardo Carvalho Aires. "PRÉ-CALIBRAÇÃO DE UM EQUIPAMENTO DE QUICK-STOP PARA TORNEAMENTO ATRAVÉS DE MÉTODO DOS ELEMENTOS FINITOS." Revista Científica Semana Acadêmica 13, no. 254 (2025): 1–12. https://doi.org/10.35265/2236-6717-254-13134.

Full text
Abstract:
This work consists of simulating the rupture of pins in the quick-stop equipment for turning aluminum and Inconel®718. Using Ansys® software, the aim was to optimize the pressure conditions in the quickstop for two different materials for the pin: structural steel and tempered gray cast iron. It was concluded that structural steel gives the pin a very high rupture resistance, which requires operating the quick-stop under pressures that can damage the tool. For the cast iron pin, the simulation found that the tests are efficient for turning aluminum with a drive pressure of 350 Mpa. For Inconel
APA, Harvard, Vancouver, ISO, and other styles
32

Yawer, Hamid. "Heat Treatment and Alloying of Spherulitic Graphite Cast Iron for Intensification of Properties." International Journal of Trend in Scientific Research and Development 2, no. 4 (2018): 2010–17. https://doi.org/10.31142/ijtsrd14557.

Full text
Abstract:
Spheroidal graphite cast iron or Spherulitic cast iron is described as a high carbon containing, iron based composite in which the graphite is accessible in negligible, round shapes rather than in the condition of pieces. Spherulitic cast iron or spheroidal graphite cast iron is at times implied as adaptable iron, as it has graphite as spheroids ferritic or pearlitic embedded in the steel system. These handles of graphite are confined clearly from the liquid in the midst of the technique of solidifying. The handles are more standard, sharp, little and constitute simply little districts of weak
APA, Harvard, Vancouver, ISO, and other styles
33

Ovsyannikov, V. E., and V. I. Vasilyev. "QUESTION OF APPLICABILITY OF THE CALCULATION ASSESSMENT METHOD OF RESISTANCE FOR DETAILS AFTER THERMAL DIFFUSION HARDENING." Vestnik SibADI 15, no. 3 (2018): 412–20. http://dx.doi.org/10.26518/2071-7296-2018-3-412-420.

Full text
Abstract:
Introduction.The article discusses the question of applicability of the calculation assessment method of resistance for details from gray cast iron after thermal diffusion hardening. The purpose of research is to check applicability of the calculated model for determination of intensity in case of the variable blanket hardness.Materials and methods.The model of intensity dependence on contact of two disks of friction gear is used in the research. Calculated determination of parameters is executed in two options: contact of the steel disk and disk from gray cast iron with the strengthened layer
APA, Harvard, Vancouver, ISO, and other styles
34

Handi, Handi, Iwan Setiono, and Waris Sudaryanto. "Analisa Pengecoran Logam dengan Pengujian Mekanik dan Metalografi." Radial : Jurnal Ilmiah Sains dan Rekayasa 1, no. 2 (2023): 99–110. http://dx.doi.org/10.62024/radial.v1i2.12.

Full text
Abstract:
The Ball Valve Axle is an axle that functions as a handle for the balls on HPD and HPS type hydrants produced by a metal foundry factory in Tegal, Central Java. This Ball Valve Axle is made from gray cast iron which consists of 2.746 percent carbon, 0.247 percent silicon, 0.708 percent manganese, 0.001 percent phosphorus, 0.058 percent sulfur, 0.007 percent chromium, 0.046 percent nickel, 0.172 percent molybdene, 0.000 percent vanadium, tungsten 0.007 percent, copper 0.122 percent, aluminum 0.003 percent, titan 0.003 percent, boron 0.00 percent, tin 0.026 percent, lead 0.000 percent and the el
APA, Harvard, Vancouver, ISO, and other styles
35

Han, K., H. W. Zandbergen, A. Böttger, and E. J. Mittemeijer. "Crystallography of tempered iron-nitrogen martensite: The roles of (011) twin boundaries." Philosophical Magazine A 80, no. 2 (2000): 311–36. http://dx.doi.org/10.1080/01418610008212055.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Han, H. W. Zandbergen, A. Bottger,, K. "Crystallography of tempered iron-nitrogen martensite: the roles of (011) twin boundaries." Philosophical Magazine A 80, no. 2 (2000): 311–36. http://dx.doi.org/10.1080/014186100250877.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Wang, Bingxu, Gary Barber, Xichen Sun, Michael Shaw, and Phil Seaton. "Characteristics of the Transformation of Retained Austenite in Tempered Austempered Ductile Iron." Journal of Materials Engineering and Performance 26, no. 5 (2017): 2095–101. http://dx.doi.org/10.1007/s11665-017-2663-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Jha, V. K., Y. H. Mozumder, S. Shama, et al. "Dry sliding wear system response of ferritic and tempered martensitic ductile iron." IOP Conference Series: Materials Science and Engineering 75 (February 19, 2015): 012009. http://dx.doi.org/10.1088/1757-899x/75/1/012009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Thumann, Philipp, Steffen Marburg, Josef Meinhardt, et al. "Frequency Dependent Fatigue Strength Investigations on Tempered Steel and Nodular Cast Iron." steel research international 90, no. 7 (2019): 1800620. http://dx.doi.org/10.1002/srin.201800620.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Aftandiliants, Y. G., and К. G. Lopatko. "Iron nanoparticle influence on the structure of improved structural steel and its properties." Metaloznavstvo ta obrobka metalìv 96, no. 4 (2020): 10–16. http://dx.doi.org/10.15407/mom2020.04.010.

Full text
Abstract:
The results of the study of the effect of nanoparticles in the shell of iron oxide Fe2O3, which when injected into the melt and heated up to melt temperature is converted into oxide Fe3O4, on the microstructure of hardened and tempered steel 25GSL and its properties. It is shown that in modified steel martensite crystals thickness is reduced compared to the original steel in average 1.9 times after the quenching, tempered martensite crystal length after tempering hardened steel at 200oC - 3 times, the plate cementite length in troostite after tempering hardened steel at 450 оС – 1,4 times, the
APA, Harvard, Vancouver, ISO, and other styles
41

Tomaras, Andrew P., Jared L. Crandon, Craig J. McPherson, and David P. Nicolau. "Potentiation of Antibacterial Activity of the MB-1 Siderophore-Monobactam Conjugate Using an Efflux Pump Inhibitor." Antimicrobial Agents and Chemotherapy 59, no. 4 (2015): 2439–42. http://dx.doi.org/10.1128/aac.04172-14.

Full text
Abstract:
ABSTRACTPreliminary enthusiasm over the encouraging spectrum andin vitroactivities of siderophore conjugates, such as MB-1, was recently tempered by unexpected variability inin vivoefficacy. The need for these conjugates to compete for iron with endogenously produced siderophores has exposed a significant liability for this novel antibacterial strategy. Here, we have exploited dependence on efflux for siderophore secretion inPseudomonas aeruginosaand provide evidence that efflux inhibition may circumvent thisin vivo-relevant resistance liability.
APA, Harvard, Vancouver, ISO, and other styles
42

Liu, Chen, Yuzhou Du, Xin Wang, et al. "Comparison of the tribological behavior of quench-tempered ductile iron and austempered ductile iron with similar hardness." Wear 520-521 (May 2023): 204668. http://dx.doi.org/10.1016/j.wear.2023.204668.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Tekeli, Süleyman, and Ahmet Güral. "Effect of Silicon Content on Wear Behavior of Heat Treated Powder Metallurgy Steels." High Temperature Materials and Processes 32, no. 2 (2013): 119–23. http://dx.doi.org/10.1515/htmp-2012-0034.

Full text
Abstract:
AbstractThree different steel compositions with 1, 3 and 5 mass% Si were prepared using atomized iron (ASC.100.29) and 0.35 mass% natural graphite powders. The mixed powders were cold pressed at 700 MPa and sintered at 1200 °C for 30 min under pure Ar gas atmosphere. Some of the sintered specimens was quenched from 850 °C and then tempered at 100 °C for 1 h. The other sintered specimens were annealed at intercritical heat treatment temperature of 750 °C for 10 min and rapidly water-quenched. The experimental results showed that in as-sintered specimens inhomogeneously dispersed typical pearlit
APA, Harvard, Vancouver, ISO, and other styles
44

Hirose, Masanori, Kaoru Yamamoto, Hirofumi Miyahara, Kazunori Sakata, and Keisaku Ogi. "Abrasion Behavior of High Cr-V-Nb Cast Iron." Key Engineering Materials 457 (December 2010): 243–48. http://dx.doi.org/10.4028/www.scientific.net/kem.457.243.

Full text
Abstract:
A series of abrasion tests on high Cr-V-Nb cast irons revealed that the addition of MC type carbide formers, V and Nb, remarkably enhances the abrasion resistance of high Cr cast iron, and the abrasion resistance becomes higher with the increase in MC type carbides[1]. Therefore, hyper eutectic Fe-4.7%C-15%Cr-7%V-5%Nb-5%Mo alloy melt was poured into 30kg and 1kg sand mold castings to distribute different sizes of primary and eutectic carbides in hardenable matrix. The abrasion test specimens cut from each casting were austenitized at 1323K for 1h then cooled in air. These specimens were temper
APA, Harvard, Vancouver, ISO, and other styles
45

Idham, M. F., B. Abdullah, A. Jaffar, M. H. Ibrahim, and A. Ramli. "The Effect of Mechanical Properties of 2.0% Vanadium Ductile Iron after Double Quenching Method." Advanced Materials Research 399-401 (November 2011): 172–75. http://dx.doi.org/10.4028/www.scientific.net/amr.399-401.172.

Full text
Abstract:
This study presents the effect of hardness and impact of 2.0% vanadium ductile iron after double quenching heat treatment method on different temperature. Addition of 2.0% Vanadium to ductile iron was produced through conventional CO2 sand casting method. The specimens were preheated to 500°C for 30 minutes, then oil quenched and austenitized at 900°C for 60 minutes before oil quenched again. After that, the specimens were tempered for 90 minutes at three different temperatures including (i) 500°C, (ii) 600°C, and (iii) 700°C respectively before cooled to room temperature by nature air. It is
APA, Harvard, Vancouver, ISO, and other styles
46

Tong, Lifeng, Qingchuan Zou, Jinchuan Jie, Tingju Li, and Zhixin Wang. "Wear Behavior of Ductile Iron Wheel Material Used for Rail-Transit Vehicles under Dry Sliding Conditions." Materials 13, no. 12 (2020): 2683. http://dx.doi.org/10.3390/ma13122683.

Full text
Abstract:
A ductile iron wheel used for a rail-transit vehicle was treated with a recommended heat-treatment process. The ductile iron wheel after heat treatment was composed of graphite nodules and tempered sorbite with an area fraction of 98%. A friction test of the ductile iron and carbon steel wheel materials was systematically performed under different normal loads and sliding velocities. The results indicated that the wear mechanism of the ductile iron wheel changed from adhesion to abrasion with an increase in the normal load level. Adhesion was the main wear mechanism at different sliding veloci
APA, Harvard, Vancouver, ISO, and other styles
47

Kopyciński, D., E. Guzik, D. Siekaniec, and A. Szczęsny. "Analysis of the High Chromium Cast Iron Microstructure after the Heat Treatment." Archives of Foundry Engineering 14, no. 3 (2014): 43–46. http://dx.doi.org/10.2478/afe-2014-0059.

Full text
Abstract:
Abstract The article presents results of heat treatment on the high chromium cast iron. The study was carrying out on samples cut from the casting made from chromium cast iron. Those were hardened at different temperatures, then tempered and soft annealed. The heat treatment was performed in a laboratory chamber furnace in the Department of Engineering Alloys and Composites at Faculty of Foundry Engineering AGH. At each stage of the heat treatment the hardness was measured by Vickers and Rockwell methods, and the microscope images were done. Additionally based on images from the optical micros
APA, Harvard, Vancouver, ISO, and other styles
48

Vadiraj, Aravind, G. Balachandran, M. Kamaraj, and Ekusa Kazuya. "Mechanical and wear behavior of quenched and tempered alloyed hypereutectic gray cast iron." Materials & Design 32, no. 4 (2011): 2438–43. http://dx.doi.org/10.1016/j.matdes.2010.11.052.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Hao, Shuai, Guoping Luo, Yuanyuan Lu, Shengli An, Yifan Chai, and Wei Song. "The Effect of SiC on the Phase Composition and Structure of Mixed Slag." Minerals 13, no. 6 (2023): 755. http://dx.doi.org/10.3390/min13060755.

Full text
Abstract:
In order to investigate the influence of SiC on the composition and structure of mixed slag (blast-furnace slag: steel slag = 1:9), the chemical composition, equilibrium-phase composition, and microscopic morphological characteristics and elemental distribution in the microscopic region of the SiC-reagent-tempered slag samples were analyzed by X-ray diffractometer (XRD), FactSage7.1 thermodynamic analysis software, scanning electron microscope, and energy spectrum analyzer. It was found that the main physical phases of the tempered slag samples were magnesia–silica–calcite (Ca3Mg(SiO4)2, C3MS2
APA, Harvard, Vancouver, ISO, and other styles
50

Li, Yi, Peng-Xiao Zhu, Cai Tang, and Zhi Sun. "Effects of Quenching Medium on Microstructure and Mechanical Properties of High Chromium Cast Iron." Crystals 12, no. 10 (2022): 1332. http://dx.doi.org/10.3390/cryst12101332.

Full text
Abstract:
The cooling properties of different cooling mediums were studied and heat treatment of high chromium cast iron was carried out by different cooling mediums. The results showed that the maximum cooling rate, cooling rate at 300 °C and the quenching liquid cooling capacity of water at 20 °C was 193.6 °C/s, 88.6 °C/s and 2431.1, respectively. With the increase in PAG concentration, the maximum cooling rate and the cooling rate at 300 °C of the coolant decreased. The microstructure of high chromium cast iron treated by water cooling, 10% PAG coolant and 20% coolant was white carbide + tempered mar
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!