Relevant bibliographies by topics / Tensile strength and nodularity

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Tensile strength and nodularity'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tensile strength and nodularity.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Tensile strength and nodularity"

1

Romiyo, Mclin Jojowar*1 Dr Lokendra Pal Singh2 &. Rajneesh Yadav3. "ANALYSIS OF EFFECTS OF HEAT TREATMENT PROCEDURES ON CHARACTERISTICS OF IRON." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 10 (2017): 134–41. https://doi.org/10.5281/zenodo.1002673.

Full text
Abstract:
The initial study was conducted on unalloyed ductile iron castings. The effect of austempering time was examined by varying austempering time in the range of 30 minutes to 90 minutes, while keeping austenitization temperature and austempering temperature constant. It was found that with the increase of austempering time, the tensile strength increased significantly. However, at 90 minutes the tensile strength decreased. The optimum temperature was found to be 60 minutes. The second variable was the effect of austenitization temperature on ductile iron. Based on the result of the first experime
APA, Harvard, Vancouver, ISO, and other styles
2

Boonmee, Sarum, Kittirat Worakhut, Auttachai Utsajai, Nupol Mai-Ngam, and Suphalerk Rassamipat. "On the Prediction of Residual Magnesium and Nodularity in Ductile Iron by Thermal Analysis." Solid State Phenomena 287 (February 2019): 24–29. http://dx.doi.org/10.4028/www.scientific.net/ssp.287.24.

Full text
Abstract:
Morphology of graphite affects the mechanical and physical properties of cast irons. It is known that the spheroidal shape of graphite promotes both tensile strength and ductility. The morphology of graphite is generally quantified by the percent nodularity and/or graphite shape factors (e.g. roundness, sphericity, compactness, aspect ratio). From the quality control aspect, the nodularity is controlled by the residual magnesium content determined by the Optical Emission Spectrometry (OES). However, the nodularity is also affected by the cooling rate and the sulfur level. Therefore, the percen
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, Young Min, Yong Huh, Jae Sil Park, and Chang Sung Seok. "The Influence of Microstructure and Chemical Composition on the Strength of Cast Iron Used for Railway Vehicles." Key Engineering Materials 321-323 (October 2006): 1479–82. http://dx.doi.org/10.4028/www.scientific.net/kem.321-323.1479.

Full text
Abstract:
Generally, the shape of graphite and the contents of elements strongly affect the tensile strength of cast iron. In this study, hardness tests and tensile tests for the two types of gray cast iron were carried out. The test results showed the similarity in the hardness but considerable difference in the tensile strength between two materials. Microstructure analysis and chemical analysis were conducted to determine the cause for the difference in the tensile strength between the two types of cast iron. The experimental results showed differences in the microstructure and chemical composition b
APA, Harvard, Vancouver, ISO, and other styles
4

Kozak, Dmytry S. "Development of Hypereutectoid Steel with Nodular Graphite." Key Engineering Materials 457 (December 2010): 132–36. http://dx.doi.org/10.4028/www.scientific.net/kem.457.132.

Full text
Abstract:
This work studies the formation of cast structures in hypereutectoid steel modified by alloying modifiers (Fe30Si55Mg7Ca2REM4, Fe34Si55Mg9Ca2 and Fe63Ni30Mg7) together with inoculants Fe20Si60Ba20. It is found that at spheroidizing by 0.7 % Fe63Ni30Mg7 and inoculation by 1.5 % Fe20Si60Ba20 causes the formation of inclusions of nodular graphite with nodularity exceeding 90 % and a structurally-free cementite structure is obtained. The mechanical properties of the steel with nodular graphite modified by Fe63Ni30Mg7 and Fe20Si60Ba20 are as follows: tensile strength (σb) 660-680 МPа, yield strengt
APA, Harvard, Vancouver, ISO, and other styles
5

Ren, Qin Xin, Ming You, Yun Bang Yao, Guang Min Wen, and Qi Zhou Cai. "Effect of Yttrium-Containing Nodulizer on the Microstructure Formation and Mechanical Properties of Heavy Section Ductile Iron Castings." Key Engineering Materials 457 (December 2010): 73–78. http://dx.doi.org/10.4028/www.scientific.net/kem.457.73.

Full text
Abstract:
Ductile iron specimens with dimensions of 400mm×400mm ×450mm were prepared by treating the melt with an yttrium-containing nodulizer. The effect of yttrium on microstructure and mechanical properties was investigated, and the formation of degenerate graphite was discussed as well. The results show that the yttrium-containing nodulizer has good nodulization fading resistance for heavy section ductile iron, since the high melting point hexagonal oxide Y2O3 particles were formed from the nodulizer in the melt and those could act as heterogeneous nuclei for graphite nodule for a long time. Segrega
APA, Harvard, Vancouver, ISO, and other styles
6

Siripongtana, Watsada, and Rungsinee Canyook. "Influence of Nickel on the Microstructure and Mechanical Properties of Nodular Cast Iron." Materials Science Forum 1023 (March 2021): 61–66. http://dx.doi.org/10.4028/www.scientific.net/msf.1023.61.

Full text
Abstract:
This research investigates the nickel content added by 1.1wt%, 2.2wt%, 3.7wt% and 4.5wt% on the microstructure and mechanical properties in the nodular cast iron. The results demonstrate that the microstructure of nickel addition consists of nodule graphite, ferrite and pearlite phase while nickel was added to 4.5 wt% the microstructure becomes ferrite transform to fully pearlite phase. In addition the ductile iron has the highest nodularity (0.79%), followed by 1.1%Ni (0.75%), 2.2%Ni (0.71%), 3.7%Ni (0.69%) and 4.5%Ni (0.58%). The hardness and tensile strength increase when increasing the nic
APA, Harvard, Vancouver, ISO, and other styles
7

Heidari, E., S. M. A. Boutorabi, M. T. Honaramooz, and J. Campbell. "Ablation Casting of Thin-Wall Ductile Iron." International Journal of Metalcasting 16, no. 1 (2023): 166–77. https://doi.org/10.1007/s40962-021-00579-7.

Full text
Abstract:
An unalloyed thin-wall ductile cast iron with the chemical composition of C = 3%, Si = 4.15%, Mn = 0.36%, Mg = 0.04%, and carbon equivalent of 4.39% was cast by both conventional and ablation casting in sections of nominal thickness 1, 2, 4, 8 mm. The effect of various commercial inoculants (based on Zr, Sr, and Ba) on microstructure and mechanical properties of the samples was investigated. In the ablation casting, the mold is eroded away by water, and the water becomes responsible for the heat transfer from the casting. In our work, ablative cooling could not be applied quickly enough to hav
APA, Harvard, Vancouver, ISO, and other styles
8

Colin-García, E., A. Cruz-Ramírez, G. Reyes-Castellanos, J. A. Romero-Serrano, R. G. Sánchez-Alvarado, and M. Hernández-Chávez. "Influence of nickel addition and casting modulus on the properties of hypo-eutectic ductile cast iron." Journal of Mining and Metallurgy, Section B: Metallurgy 55, no. 2 (2019): 283–93. http://dx.doi.org/10.2298/jmmb181012023c.

Full text
Abstract:
The effect of the casting modulus on the distribution and features of graphite in hypo-eutectic ductile iron unalloyed and alloyed with nickel (0.88 wt %) was studied. The cooling rate of the casting plates of 25.4, 12.7 and 8.5 mm in thickness with a casting modulus of 6.87, 4.46 and 3.31 mm, respectively promotes several microstructural changes, such as cementite precipitation and a noticeable nodule count increment. The nickel addition suppressed the cementite formation and improved the nodule count and nodularity for the three casting modulus evaluated. The nickel addition increased the no
APA, Harvard, Vancouver, ISO, and other styles
9

Bai, Jiaojiao, Haifeng Xu, Yuhui Wang, et al. "Microstructures and Mechanical Properties of Ductile Cast Iron with Different Crystallizer Inner Diameters." Crystals 12, no. 3 (2022): 413. http://dx.doi.org/10.3390/cryst12030413.

Full text
Abstract:
Five types of ductile cast irons (DCIs) were fabricated by crystallizers with different inner diameters, as well as five different austempered ductile cast irons (ADIs) after the same isothermal quenching process. The effects of amount, diameter, and morphology of graphite on the mechanical properties of DCI and ADI and the effect of the original as-cast microstructure on the microstructure after austempering were studied. The microstructures were characterized by optical microscopy, scanning electron microscopy, and X-ray diffraction. Their mechanical properties were examined by tensile, U-sh
APA, Harvard, Vancouver, ISO, and other styles
10

Suharno, Bambang, Johny Wahyuadi Soedarsono, Tresna Priyana Soemardi, and Rianti Dewi Sulamet-Ariobimo. "The Effects of Plates Position in Vertical Casting Producing Thin Wall Ductile Iron." Advanced Materials Research 277 (July 2011): 66–75. http://dx.doi.org/10.4028/www.scientific.net/amr.277.66.

Full text
Abstract:
In the general rule of casting design the thickest part of the cast should be placed near to the ingate. This arrangement was meant to guarantee the completion of filling process. An unusual vertical casting design to produce plates with different thicknesses was established based on the idea that the heat from molten metal will always warm up its entire runner. In this design the thinnest plate is placed near to the ingate. The design was made for producing thin wall ductile iron. This research was conducted to see the effects of reverse thickness arrangement in casting design to the microstr
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Tensile strength and nodularity"

1

Yin, Penghai. "Tensile Strength of Unsaturated Soils." Thesis, Université d'Ottawa / University of Ottawa, 2021. http://hdl.handle.net/10393/41841.

Full text
Abstract:
Desiccation-induced soil cracking is of significant interest in several engineering disciplines, which include geotechnical and geoenvironmental engineering, mining engineering, and agriculture engineering. The hydraulic, mechanical, thermal and other physico-chemical properties of unsaturated soils can be predominantly influenced due to cracks. Reliable information of these properties is required for the rational design and maintenance of earth structures taking account of the influence the soil-atmosphere interactions (e.g., for expansive soil slopes, earth dams, and embankments). In spite o
APA, Harvard, Vancouver, ISO, and other styles
2

Huang, Jian. "The Tensile Strength of Liquid Nitrogen." PDXScholar, 1992. https://pdxscholar.library.pdx.edu/open_access_etds/1134.

Full text
Abstract:
The tensile strength or the negative pressure required to induce cavitation in a pure liquid has been a puzzling subject. On one hand, the classical nucleation theory has met great success in predicting the nucleation rates of superheated liquids. On the other hand, most of reported experimental values of the tensile strength for different liquids are far below the prediction from the classical nucleation theory. In this study, homogeneous nucleation in liquid nitrogen and its tensile strength have been investigated. In order to carry out the measurement of the tensile strength of liquid nitro
APA, Harvard, Vancouver, ISO, and other styles
3

Baltodano-Goulding, Rafael. "Tensile strength, shear strength, and effective stress for unsaturated sand." Diss., Columbia, Mo. : University of Missouri-Columbia, 2006. http://hdl.handle.net/10355/4364.

Full text
Abstract:
Thesis (Ph.D.)--University of Missouri-Columbia, 2006.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file viewed on (February) Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
4

McClain, Michael Patrick. "A micromechanical model for predicting tensile strength." Thesis, This resource online, 1996. http://scholar.lib.vt.edu/theses/available/etd-10052007-143117/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Nissen, Joel Alan. "The Tensile Strength of Liquid Helium Four." PDXScholar, 1988. https://pdxscholar.library.pdx.edu/open_access_etds/1357.

Full text
Abstract:
It is well known that most liquids exhibit a tensile strength which is much smaller in magnitude than the tensile strength predicted by homogeneous nucleation theory. This lack of agreement is usually attributed to the difficulty of preparing liquid samples free from foreign gases which act as heterogeneous nucleation sites. Liquid helium occupies a unique place among liquids for tensile strength measurements because all foreign gases are frozen out at liquid helium temperatures. Furthermore, superfluid 4He should fill all crevices on solid surfaces, eliminating the chance of heterogeneous nuc
APA, Harvard, Vancouver, ISO, and other styles
6

Shang, Junlong. "Persistence and tensile strength of incipient rock discontinuities." Thesis, University of Leeds, 2016. http://etheses.whiterose.ac.uk/15527/.

Full text
Abstract:
Rock discontinuities are fundamentally important to most rock engineering projects but predicting or measuring their properties such as roughness, aperture, shape and extent (persistence) are fraught with difficulty. So far the solution of how to measure or predict persistence is poorly researched partly because the concept of how to investigate the extent of rock discontinuities within a rock mass seems intractable, by any economical methods. In the majority of engineering applications it is a fairly widespread practice to follow a conventional approach, assuming a 100% persistence value. How
APA, Harvard, Vancouver, ISO, and other styles
7

Yamaguchi, Takashi. "Fundamental Study on High Strength Bolted Tensile Joints." Kyoto University, 1996. http://hdl.handle.net/2433/160789.

Full text
Abstract:
本文データは平成22年度国立国会図書館の学位論文(博士)のデジタル化実施により作成された画像ファイルを基にpdf変換したものである<br>Kyoto University (京都大学)<br>0048<br>新制・課程博士<br>博士(工学)<br>甲第6407号<br>工博第1504号<br>新制||工||1025(附属図書館)<br>UT51-96-F286<br>京都大学大学院工学研究科土木工学専攻<br>(主査)教授 渡邊 英一, 教授 小林 昭一, 教授 土岐 憲三<br>学位規則第4条第1項該当
APA, Harvard, Vancouver, ISO, and other styles
8

Ifland, Chad. "TENSILE STRENGTH OF STEEL PLATES USING LONGITUDINAL WELDS." OpenSIUC, 2012. https://opensiuc.lib.siu.edu/theses/800.

Full text
Abstract:
When a tension steel plate is welded to a gusset steel plate and a tension load is transmitted to the gusset plate by longitudinal welds along both edges at the end of the tension plate, the shear lag factor (U) is used to determine the design tensile strength for the plate. The shear lag factor is determined from the American Institute of Steel Construction (AISC) Manual. The shear lag factor is selected from the table based on the length of the weld and the width of the steel plate that is in tension. The thickness of the plates, boundary condition of the gusset plate, the size and strength
APA, Harvard, Vancouver, ISO, and other styles
9

Zheng, Wei, and 鄭偉. "Shock vibration resistance and direct tensile strength of concrete." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B31242753.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zheng, Wei. "Shock vibration resistance and direct tensile strength of concrete." Hong Kong : University of Hong Kong, 2001. http://sunzi.lib.hku.hk/hkuto/record.jsp?B23273124.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Tensile strength and nodularity"

1

National Institute of Standards and Technology (U.S.), ed. Tensile strength of an interlocking composite connection. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

G, Ifju Peter, and Langley Research Center, eds. Through-the-thickness tensile strength of textile composites. National Aeronautics and Space Administration, Langley Research Center, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

G, Ifju Peter, and Langley Research Center, eds. Through-the-thickness tensile strength of textile composites. National Aeronautics and Space Administration, Langley Research Center, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Carli, Charles G. Tensile and compressive MOE of flakeboards. U.S. Forest Service, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Poon, C. Tensile fracture of notched composite laminates. National Research Council Canada, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kruenate, Jittiporn. Investigation of the tensile strength of crosslinked thermoplastic materials. UMIST, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Showalter, K. L. Effect of length on tensile strength in structural lumber. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

W, Green David, and Forest Products Laboratory (U.S.), eds. Moisture content and tensile strength of Douglas fir dimension lumber. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

W, Green David, and Forest Products Laboratory (U.S.), eds. Moisture content and tensile strength of Douglas fir dimension lumber. U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Center, Langley Research, and United States. National Aeronautics and Space Administration., eds. Synthesis and characterization of modified phenylethynyl terminated polyimides. National Aeronautics and Space Administration, Langley Research Center, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Tensile strength and nodularity"

1

Gooch, Jan W. "Strength, Tensile." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11275.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gooch, Jan W. "Tensile Strength." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11633.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fontananova, Enrica. "Tensile Strength." In Encyclopedia of Membranes. Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-44324-8_1801.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Weik, Martin H. "tensile strength." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_19345.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fontananova, Enrica. "Tensile Strength." In Encyclopedia of Membranes. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-40872-4_1801-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Li, Yanrong, Jingui Zhao, and Bin Li. "Tensile strength." In Loess and Loess Geohazards in China. CRC Press, 2017. http://dx.doi.org/10.1201/9781315177281-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gooch, Jan W. "Tensile-Shear Strength." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11631.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gooch, Jan W. "Tensile Ultimate Strength." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11638.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gooch, Jan W. "Tensile Yield Strength." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11640.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Gooch, Jan W. "True Tensile Strength." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_12185.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Tensile strength and nodularity"

1

Patel, Dhruv, Devendra Parmar, and Siddharthsinh Jadeja. "Influence of Ca-Ba and Sr Base Inoculants on Metallurgical and Mechanical Properties of Grey and Ductile Cast Irons." In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-86448.

Full text
Abstract:
Microstructural adaptation of cast iron alloys by inoculation is a well-known practice to swell their mechanical properties. In foundries, several inoculants have been used to refine grain structure, and to obtain uniform distribution of graphite flakes. Inoculation is one of the most critical steps in cast iron production. The effectiveness of inoculants depends on melt temperature, method of addition, type of inoculants, and holding time. In this paper, the effect of Ca-based, Ba-based, Ca-Ba based and Sr-based inoculants on microstructure and tensile properties of grey cast iron IS-210 and
APA, Harvard, Vancouver, ISO, and other styles
2

Zwick, U., R. Freidinger, and M. Wittmann. "Fiber With High Tensile Strength." In 1985 International Technical Symposium/Europe, edited by Remy Bouillie. SPIE, 1986. http://dx.doi.org/10.1117/12.950968.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zabielska-Adamska, Katarzyna, and Mariola Wasil. "Tensile Strength of Barrier Material." In Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.064.

Full text
Abstract:
The most significant element of the municipal landfill construction is leak-proof assurance which reduces the negative influence of waste on the environment. Mineral liners and covers are correctly built-in cohesive soil layers, with a coefficient of permeability less than 10−9 m/s. Recently, researchers have conducted investigations with the possibility of utilising fly ash as a mineral barrier material. A very important part in the selection of material for the barrier is determining its ability to deformation. Its destruction is initiated by the process of the formation and propagation of c
APA, Harvard, Vancouver, ISO, and other styles
4

"Prediction of Dynamic Tensile Strength." In SP-175: Concrete and Blast Effects. American Concrete Institute, 1998. http://dx.doi.org/10.14359/5924.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Asem, Pouyan, Zdenek P. Bažant, Juerg Matter, and Joseph F. Labuz. "Tensile Strength of Serpentinized Harzburgite." In 58th U.S. Rock Mechanics/Geomechanics Symposium. ARMA, 2024. http://dx.doi.org/10.56952/arma-2024-1101.

Full text
Abstract:
ABSTRACT: Ultramafic rocks play an active role in geologic processes including the carbon cycle and serpentinization reactions. Many of these processes accompany mineral transformations that result in volume increase of the product phase (e.g. serpentinization, carbonation). Accommodation of changes in volume is often associated with formation of fracture surfaces as new minerals form. Thus, fracture properties such as tensile strength or fracture toughness are of interest in analyses of volumetric deformation during mineral replacement. Cores extracted from Oman ophiolite were used to measure
APA, Harvard, Vancouver, ISO, and other styles
6

Niskanen, Kaarlo, Jari Sirviö, and Rolf Wathén. "Tensile Strength of Paper Revisited." In Advances in Paper Science and Technology, edited by S. J. I’Anson. Fundamental Research Committee (FRC), Manchester, 2005. http://dx.doi.org/10.15376/frc.2005.1.563.

Full text
Abstract:
Traditional micromechanical theories for the tensile strength of paper do not account for the tensile stiffness of paper, even though in practice tensile strength is closely coupled with tensile stiffness. Another problem is with the micromechanical input parameters, few of which have a precise meaning in real paper. Especially the interpretation of inter-fiber bonding is ambiguous. None of the existing theories connects tensile strength with an independently measurable value of bonding degree or bond strength. As a result, the conventional interpretation of tensile strength data is unreliable
APA, Harvard, Vancouver, ISO, and other styles
7

FISH, JOHN, and SUNG LEE. "Tensile strength of tapered composite structures." In 29th Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics and Astronautics, 1988. http://dx.doi.org/10.2514/6.1988-2252.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Renić, Tvrtko, and Tomislav Kišiček. "Direct tensile strength test of concrete." In 4th Symposium on Doctoral Studies in Civil Engineering. University of Zagreb Faculty of Civil Engineering, 2018. http://dx.doi.org/10.5592/co/phdsym.2018.09.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Huneault, Justin, Jihane Kamil, Andrew Higgins, and David Plant. "Dynamic tensile strength of silicone oils." In SHOCK COMPRESSION OF CONDENSED MATTER - 2017: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Author(s), 2018. http://dx.doi.org/10.1063/1.5044825.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rodriguez, Sofía, María Guarín, Andrés Restrepo, and César Echavarría. "Tensile Strength of High Performance Concrete." In The 8th International Conference on Civil, Structural and Transportation Engineering. Avestia Publishing, 2023. http://dx.doi.org/10.11159/iccste23.114.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Tensile strength and nodularity"

1

Huang, Jian. The Tensile Strength of Liquid Nitrogen. Portland State University Library, 2000. http://dx.doi.org/10.15760/etd.1133.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nissen, Joel. The Tensile Strength of Liquid Helium Four. Portland State University Library, 2000. http://dx.doi.org/10.15760/etd.1356.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Duthinh, Dat. Tensile strength of an interlocking composite connection. National Institute of Standards and Technology, 2000. http://dx.doi.org/10.6028/nist.ir.6565.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Korinko, P., and G. Chapman. CHARACTERIZATION OF TENSILE STRENGTH OF GLOVEBOX GLOVES. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1036011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tennery, V. (Tensile strength measurement techniques for structural ceramics). Office of Scientific and Technical Information (OSTI), 1990. http://dx.doi.org/10.2172/6837433.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Goeke, Elizabeth C., and Shun-Chin Chou. Examination of the Tensile Strength of Graphite Fibers. Defense Technical Information Center, 1989. http://dx.doi.org/10.21236/ada207277.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Doi, Shigeru, and Takao Mori. Tensile Shear Strength of Aluminum-Steel Rivet Joint. SAE International, 2005. http://dx.doi.org/10.4271/2005-08-0540.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wright, Jared C., and Jeffrey J. Swab. Uniaxial Tensile Strength and Flaw Characterization of SiC-N. Defense Technical Information Center, 2014. http://dx.doi.org/10.21236/ada597920.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Burchell, Timothy. MERSEN GRADE 2114: A COMPARISON OF TENSILE STRENGTH DATA. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1905428.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Burchell, Timothy. Mersen Grade 2114: Tensile Strength from Brazilian Disc Testing. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/2455105.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Tensile strength and nodularity' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography