Relevant bibliographies by topics / Tensile Strength; ANSYS; Transient Thermal Analysis

Contents

  1. Journal articles
  2. Conference papers

Academic literature on the topic 'Tensile Strength; ANSYS; Transient Thermal Analysis'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tensile Strength; ANSYS; Transient Thermal Analysis.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Tensile Strength; ANSYS; Transient Thermal Analysis"

1

Nagpure, Homeshwar Girirao, and Samir Kumar Nath. "Effect of Change in Startup Cycle Time on Transient Thermal Stresses in Steam Turbine Rotor." SAMRIDDHI : A Journal of Physical Sciences, Engineering and Technology 14, no. 03 (2022): 341–47. http://dx.doi.org/10.18090/samriddhi.v14i03.15.

Full text
Abstract:
During the turbine start stop period, occuring at brief intervals , the temperature of the steam turbine rotor varies. Because of the significant temperature gradients, this shift in temperature causes transitory thermal stresses in the rotor. Changes in material parameters such as thermal expansion coefficient ,modulus of elasticity, thermal conductivity, specific heat, Poisson's ratio, and others cause transient stresses. Thermal and mechanical stresses are applied to the turbine rotor. Before designing the rotor, it is necessary to estimate transient thermal stresses. The finite element stu
APA, Harvard, Vancouver, ISO, and other styles
2

Majeed, Majid Hameed. "Effects of Welding Parameters on Temperature Distribution and Tensile Strength of AA6061-T6 Welded by Friction Stir Welding." Journal of Engineering 21, no. 11 (2015): 24–39. http://dx.doi.org/10.31026/j.eng.2015.11.02.

Full text
Abstract:
The present research aims to study the effect of friction stir welding (FSW) parameters on temperature distribution and tensile strength of aluminum 6061-T6. Rotational and traverse speeds used were (500,1000,1400 rpm) and (14,40,112 mm/min) respectively. Results of mechanical tests showed that using 500rpm and 14mm/min speed give the best strength. A three- dimensional fully coupled thermal-stress finite element model via ANSYS software has been developed. The Rate dependent Johnson-Cook relation was utilized for elasto-plastic work deformations. Heat-transfer is formulated using a moving hea
APA, Harvard, Vancouver, ISO, and other styles
3

Enuwhure, Efejero Richard, Chinedum Ogonna Mgbemena, and Christopher Okechukwu Izelu. "Development and Characterization of a Remanufactured Motorcycle Clutch Hub from End-of-Life Aluminium Alloy." Asian Review of Mechanical Engineering 13, no. 1 (2024): 27–36. http://dx.doi.org/10.70112/arme-2024.13.1.4238.

Full text
Abstract:
This study aims to employ reverse engineering in the development of the Yamaha CY 80 motorcycle clutch hub using end-of-life (EOL) aluminium alloy obtained from automotive vehicle scraps. The remanufactured motorcycle clutch hub underwent characterization and transient thermal analysis by integrating the geometric and structural features of the clutch hub. The EOL aluminium was thoroughly washed with a sodium hydroxide (NaOH) solution, cleaned with running water, and dried under sunlight to remove impurities trapped on the metal surfaces. The EOL aluminium alloy was melted in a gas furnace, an
APA, Harvard, Vancouver, ISO, and other styles
4

C.Selva, Ganesh, Dr.T.Vigraman, D.Sujith, M.Velmanikandan, and T.Vetrivel. "MICROSTRUCTURAL AND TRANSIENT THERMAL ANALYSIS OF TIG WELDED JOINT SAE 2205 WITH AISI 304 WITH AISI 308 FILLER METAL." International Journal of Engineering Technologies and Management Research 4, no. 10 (2017): 15–25. https://doi.org/10.5281/zenodo.1040736.

Full text
Abstract:
<strong><em>In the present work SAE 2205 is welded with AISI 304 using AISI 308 filler wire. TIG welding current was maintained at 110, 120 and 130 Amp and the voltage was set at 40 Volt. A constant welding speed of 0.5 mm/s was maintained for all the experiments. The optical microscopic examination of the welded samples revealed the presence of recrystalized zone, mushy zone at the weld metal SAE 2205 side and columnar grains adjacent to the heat affected zone. The maximum hardness value of Rc 29 was observed in the welded region. The increase in hardness value was attributed to absorption of
APA, Harvard, Vancouver, ISO, and other styles
5

Totok, Suwanda, Soenoko Rudy, Surya Irawan Yudy, and Agus Choiron Moch. "TEMPERATURE CYCLE ANALYSIS OF A6061-AISI304 DISSIMILAR METAL CONTINUOUS DRIVE FRICTION WELDING." Eastern-European Journal of Enterprise Technologies 3, no. 12 (105) (2020): 38–43. https://doi.org/10.15587/1729-4061.2020.203391.

Full text
Abstract:
In the previous study, Continuous Drive Friction Welding (CDFW) had been investigated to determine the strength of joining, burn off, and temperature distribution. In this study, Dissimilar Metal CDFW was studied to assess temperature cycle analysis. Aluminum 6061 (A6061) workpiece was fixed, and an AISI 304 was rotated at 1,000&nbsp;rpm. The temperature distribution was measured by using an OMEGA Thermocouple Data Logger. The thermocouple was installed near joining location 5&nbsp;mm distance from the joint. In the computer simulation, the geometry of CDFW was designed using ANSYS Design Mode
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Chong, and Yan Sheng Jiand. "Thermal Shock Damage Evaluation of Porous Refractory by Finite Element Method." Defect and Diffusion Forum 312-315 (April 2011): 1032–37. http://dx.doi.org/10.4028/www.scientific.net/ddf.312-315.1032.

Full text
Abstract:
This work addresses damage evaluation of porous mullite refractory subjected to thermal shock. Incommunicating circular pores were distributed randomly at a volume percentage up to 40% in a cylinder of 20 cm diameter. The analysis was performed by means of the software ANSYS® combined with a pre-program that generates randomly distributed pores of given size. The analysis procedure was divided into two stages. In the first, transient thermal analysis considering temperature-dependent material property was dealt with different thermal shock temperatures under natural cooling condition. The foll
APA, Harvard, Vancouver, ISO, and other styles
7

Hu, Xiaoyi. "Integrated biomechanical-thermomechanical approach for hydration heat management in hollow concrete piers: Balancing structural integrity and construction ergonomics." Molecular & Cellular Biomechanics 22, no. 5 (2025): 1720. https://doi.org/10.62617/mcb1720.

Full text
Abstract:
This study investigates temperature field variations and associated risks in tall hollow concrete bridge piers caused by cement hydration heat during construction. Integrating field measurements and numerical simulations, we analyzed the dynamic evolution of internal temperature distribution and its structural implications. Field experiments involved continuous temperature monitoring using high-precision sensors embedded in critical zones (core, surface, and varying depths) of a representative pier. Concurrently, a 3D finite element model was developed in ANSYS, incorporating nonlinear thermal
APA, Harvard, Vancouver, ISO, and other styles
8

Dahmani, Lahlou, and Rachid Mehaddene. "Thermomecanical Response of LNG Concrete Tank to Cryogenic Temperatures." Defect and Diffusion Forum 312-315 (April 2011): 1021–26. http://dx.doi.org/10.4028/www.scientific.net/ddf.312-315.1021.

Full text
Abstract:
In this paper are illustrated the principal aspects connected with the numerical evaluation of thermal stress induced by LNG (liquefied natural gas) in a concrete tank. In order to investigate the thermal induced tensile stresses, the ANSYS finite element code has been employed for performing a sequential, non linear, transient thermal-structural analysis, taking into account the thermal dependant properties of the concrete such as thermal conductivity and specific heat. Temperature distribution data of thermal analysis is required in the coupled field analysis finally to obtain and analyze th
APA, Harvard, Vancouver, ISO, and other styles
9

Stankovic, Danijela, Luke A. Bisby, and Giovanni P. Terrasi. "Influence of Temperature on the Mechanical Performance of Unidirectional Carbon Fiber Reinforced Polymer Straps." Materials 14, no. 8 (2021): 1903. http://dx.doi.org/10.3390/ma14081903.

Full text
Abstract:
The performance of pretensioned, laminated, unidirectional (UD), carbon fiber reinforced polymer (CFRP) straps, that can potentially be used for example as bridge deck suspender cables or prestressed shear reinforcements for reinforced concrete slabs and beams, was investigated at elevated temperatures. This paper aims to elucidate the effects of elevated temperature specifically on the tensile performance of pretensioned, pin-loaded straps. Two types of tests are presented: (1) steady state thermal and (2) transient state thermal. Eight steady-state target temperatures in the range of 24 °C t
APA, Harvard, Vancouver, ISO, and other styles
10

Khashan, Hayder Kadhim, Mondher Zidi, and Emad Kamil Hussein. "Thermal and Morphological Investigation of Adding Silicon Carbide as a Nano-Material to a Carbon Fibre Composites: Numerical and Experimental Analysis." Journal of Advanced Research in Numerical Heat Transfer 35, no. 1 (2025): 54–67. https://doi.org/10.37934/arnht.35.1.5467.

Full text
Abstract:
This research investigates the mechanical, morphological, and thermal properties of carbon fiber composites with Silicon Carbide (SiC) nanoparticles. Both composites were produced using Vacuum Bagging Molding (VBM) and analyzed through numerical and experimental methods, including tensile tests (ASTM D3039), ultrasonic three-point bending fatigue tests (ASTM C1360), and morphological examinations (ASTM D1894). The steady-state thermal analysis was conducted using ANSYS. The modified composites contained 2% and 8% wt. of SiC nanoparticles. Results showed improvements in tensile strength by 23%
APA, Harvard, Vancouver, ISO, and other styles
More sources

Conference papers on the topic "Tensile Strength; ANSYS; Transient Thermal Analysis"

1

Shen, Jun, Yanfang Tang, Juncheng Xu, and Yinghua Liu. "Strength and Fatigue Analysis of Tube-Sheet Subjected to Thermal Shock." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63110.

Full text
Abstract:
A calculation model for a tube-sheet under thermal shock loading with the finite element code ANSYS is established in this paper. A three-dimensional finite element model is established to simulate thermal shock process in order to obtain temperature and stress distributions of the structure. The duration time of the thermal shock is taken as about ten seconds and thermal cycling numbers are more than 1000 times for the whole service life of the structure. In order to capture accurate temperature and stress profile of this structure, thermo-mechanical coupling approach and transient thermal an
APA, Harvard, Vancouver, ISO, and other styles
2

Gund, Mahesh, and R. T. Vyavahare. "Finite Element Analysis of Ply Orientation Effect on Mechanical Properties of Hybrid Composite Material." In National Conference on Relevance of Engineering and Science for Environment and Society. AIJR Publisher, 2021. http://dx.doi.org/10.21467/proceedings.118.27.

Full text
Abstract:
In recent years, composite material is used as an alternative material for materials like metal, wood, etc. due to low in weight, strength to weight ratio and stiffness properties. Natural fibers like coir fiber, palm fiber, jute fiber, banana plant fiber, etc have low cost, easy availability and less harmful to human body. Also, carbon fiber having various properties such as high strength to weight ratio, rigidity, good tensile strength, fatigue resistance, fire resistance/not flammable, high thermal conductivity. This research work aims to find out the mechanical properties of Carbon fiber,
APA, Harvard, Vancouver, ISO, and other styles
3

Rostami, Kh, A. R. M. Gharabaghi, M. R. Chenaghlou, and A. Arablouei. "Finite Element Analysis of Residual Stresses in TT-Welded Joint of a Fixed Jacket Platform." In 25th International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2006. http://dx.doi.org/10.1115/omae2006-92454.

Full text
Abstract:
Welded steel tubular joints are the kind of connections used extensively in the construction of fixed jacket platforms. The welding process creates considerable tensile residual stresses near the toe of TT-joint due to the rapid cooling and contraction of final welding layers. Welding produces thermal stresses that cause structural distortions, which influence the buckling strength of the structure. In this study thermal elasto-plastic analysis is carried out using ANSYS finite element techniques to evaluate the thermo-mechanical behavior and the residual stresses of the TT-joint. Moreover, th
APA, Harvard, Vancouver, ISO, and other styles
4

Jensen, Ben J., Charlton F. Campbell, and Nicholas A. Klymyshyn. "Thermal Stress Analysis of a Spent Nuclear Fuel Canister." In ASME 2021 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/pvp2021-61608.

Full text
Abstract:
Abstract The potential for chloride induced stress corrosion cracking (CISCC) in spent nuclear fuel dry storage canisters is a current topic of research by the US Department of Energy Spent Fuel and Waste Science and Technology program. One of the important prerequisites for CISCC is a tensile residual stress state. This study utilizes computational models to provide an initial analysis of thermal stresses in a generic spent nuclear fuel canister. A STAR-CCM+ thermal fluid model provides a temperature profile analysis of the canister based on four different ambient temperature conditions. An A
APA, Harvard, Vancouver, ISO, and other styles
5

Aboayanah, Kareem Ramzy, Lei Sun, and Giovanni Grasselli. "Investigating Thermal Gradient Cracking and Fracture Process Zone Development in Granitic Rocks." In International Geomechanics Symposium. ARMA, 2023. http://dx.doi.org/10.56952/igs-2023-0289.

Full text
Abstract:
Abstract Thermal stresses developed under disturbed temperature field induce thermal cracking when material’s strength is exceeded. In this paper, digital image correlation (DIC) and thermo-mechanical finite-discrete element method (FDEM-TM) simulations were adopted to investigate thermal gradient cracking and the evolution of its fracture process zone in Stanstead granite. DIC results showed that thermal gradient cracks initiated in a radial pattern from the heating source and the spatial density of the cracks was higher closer to the heating source than at the sample periphery. The macrocrac
APA, Harvard, Vancouver, ISO, and other styles
6

Feng, Michael, Peter Kwok, Dariusz Pryputniewicz, Ryan Marinis, and Ryszard Pryputniewicz. "Dynamic Analysis to Confirm Lead Failure of a 352-Pin CQFP Under Shock." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-11400.

Full text
Abstract:
During qualification testing of an electronics module, several leads in one corner of a 352 pin ceramic quad flat pack (CQFP) component failed. The module was exposed to several different environments including sine vibration, thermal cycling, random vibration, and shock. The last test environment applied was seven consecutive shocks normal to the printed wiring board. Given the severity of the shock response spectrum, it was believed that the shocks normal to the board were the culprit. Therefore, a finite element model (FEM) was created of the module to diagnose the cause of the failure. The
APA, Harvard, Vancouver, ISO, and other styles
7

Dikici, Birce, Samarth Motagi, Prahruth Kantamani, Suma Ayyagari, and Marwan Al-Haik. "Thermal Conductivity Study of Biomass Reinforced Polymer Composites." In ASME 2020 Heat Transfer Summer Conference collocated with the ASME 2020 Fluids Engineering Division Summer Meeting and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/ht2020-9065.

Full text
Abstract:
Abstract The aim of this study was to investigate the thermal conductivity of natural fiber reinforced polymer composites (NFRP) as potential structural materials. As a natural fiber, Bermuda grass seeds, conifer cones and pinecones are selected. The matrix comprised Vinyl ester resin. The mechanical properties (tensile strength and Young’s modulus) and fractography analysis were investigated in our previous study (Dikici B. M. S.-H., 2019). In the current study, the thermal conductivity was probed using transient plane source technique implemented in the TPS 2500S Thermal Constants Analyzer.
APA, Harvard, Vancouver, ISO, and other styles
8

Nemeth, Noel N., Osama M. Jadaan, Eric H. Baker, and John P. Gyekenyesi. "Lifetime Reliability Prediction of Ceramics Subjected to Thermal and Mechanical Cyclic Loads." In ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-27047.

Full text
Abstract:
A methodology is shown for predicting the time-dependent reliability (probability of survival) of ceramic components against catastrophic rupture when subjected to thermal and mechanical cyclic loads. This methodology is based on the Weibull distribution to model stochastic strength and a power law that models subcritical crack growth. Changes in material response that can occur with temperature or time (i.e. changing fatigue and Weibull parameters with temperature or time) are accommodated by segmenting a cycle into discrete time increments. Material properties are assumed to be constant with
APA, Harvard, Vancouver, ISO, and other styles
9

Mallison, Thomas M., and Michael F. Modest. "Transient Elastic Stress Development During Laser Scribing of Ceramics." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-1081.

Full text
Abstract:
Abstract Lasers are emerging as a valuable tool for shaping and cutting hard and brittle ceramics. Unfortunately, the large, concentrated heat flux rates that allow the laser to efficiently cut and shape the ceramic also result in large localized thermal stresses in a small heat-affected zone. These notable thermal stresses can lead to micro-cracks, a decrease in strength and fatigue life, and possibly catastrophic failure. In order to assess where, when, and what stresses occur during laser scribing, an elastic stress model has been incorporated into a three-dimensional scribing and cutting c
APA, Harvard, Vancouver, ISO, and other styles
10

Ranganathan, Soundararajan, Shanthosh gopal, Sachin Adithyaa, and Sanjeev venkatesan. "Design and Analysis of Hybrid Composite Brake Disc with Various Grooves." In International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. SAE International, 2020. http://dx.doi.org/10.4271/2020-28-0503.

Full text
Abstract:
&lt;div class="section abstract"&gt;&lt;div class="htmlview paragraph"&gt;The enormous need of effective transportation creates an unavoidable situation in automobile industries to improve and maintain safety systems in vehicles. In crisis, brake disc of the braking system plays a vital role in effective braking of the vehicle. The main objective of this proposed study is to design a disc with two different groove patterns and a material with two different compositions. By using solidworks, a brake disc with proper slots and groove pattern (J hook and square groove) was designed for improved b
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Tensile Strength; ANSYS; Transient Thermal Analysis' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography