Relevant bibliographies by topics / Tepelný výpočet kotla

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Tepelný výpočet kotla'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tepelný výpočet kotla.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Tepelný výpočet kotla"

1

Soľár, Slavomír. "Roštový parní kotel s přirozenou cirkulací na spalování slámy z pšenice,žita a ječmene." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232154.

Full text
Abstract:
The main aim of this diploma thesis is to proceed a design of grate steam boiler for grain straw combustion with 15,6 MJ/kg of fuel efficiency. Steam power of boiler is 15 t/h, pressure of overheated steam is 5 MPa, temperature of overheated steam is 415 °C and temperature of inlet water is 125 °C. The estimation is based on proportioning of draughts and segments of boiler and on thermal computation. Verification of divergence of thermal balance is going to constate accuracy of boiler design.
APA, Harvard, Vancouver, ISO, and other styles
2

Růžička, Tomáš. "Tepelný výpočet parního kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230433.

Full text
Abstract:
The topic of this thesis is the thermal calculation of steam boiler with natural gas fuel. The first part is describing technical characteristic and parametres of the boiler. The main part of this thesis is the thermal calculation of the boiler. The following part deals with determination of steam amount and steam parametres for blowing through pipes of the boiler.
APA, Harvard, Vancouver, ISO, and other styles
3

Polášek, Kryštof. "Kontrolní tepelný výpočet teplovodního žárotrubného kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416635.

Full text
Abstract:
This diploma thesis deals with thermal calculations of fire tube water heater. The first part of the thesis describes different classifications of boilers and water heaters and provides a basic overview for different types of commonly used boilers. The next part describes thermal calculation model created in Maple software, used formulas and algorithm of the model. Subsequently, the model is applied to the experimental water heater in the form of computational rating. In the last part of the thesis the model is applied to the existing operated industrial water heater to evaluate predictive ability of the calculation model by comparing the essential operating parameters obtained from the calculation with real data measured on the water heater.
APA, Harvard, Vancouver, ISO, and other styles
4

Kallas, Miloš. "Změna palivové základny uhelného kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417739.

Full text
Abstract:
This thesis deals with the change of the fuel base of a coal boiler due to the reduction of CO2 emissions and its thermal recalculation. In the first part, there is implemented calculation of the combusting chamber. This is followed by the recalculation of the heat transfer surfaces. The emphasis is placed on the preservation of the exsiting steam parametrs.
APA, Harvard, Vancouver, ISO, and other styles
5

Haška, Miroslav. "Přepočet kotle při změně jmenovitých parametrů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228707.

Full text
Abstract:
This thesis concerns with recalculation of steam boiler. Arrangement for reaching of new steam boiler parameters and temperature of combustion gases was suggested at first. Then it was verified with thermal calculation, all necessities included.
APA, Harvard, Vancouver, ISO, and other styles
6

Mik, Martin. "Plynofikace horkovodního kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232167.

Full text
Abstract:
This thesis deals with the fuel change for hot water boilers with wattage of 116.3 MW. At first a stoichiometric calculation is drawn. Calculation of pressure loss in pipeline follows. Consequential part elaborates on calculation of parallel connected heating surfaces following with a draft of regenerative air heater Ljungtröm. Conclusively, a calculation is carried out to verify the functionality of the serial connection of the heating surfaces.
APA, Harvard, Vancouver, ISO, and other styles
7

Paštěka, Michal. "Návrh roštového kotle na spalování tříděného odpadu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241207.

Full text
Abstract:
The aim of the master’s thesis is design of grade boiler for combustion refuse derived fuel. There are specified the steam parameters and the fuel-element analysis, based on this analysis are determined stoichiometric calculation. Furthermore is calculated heat balance of the boiler, heat losses and thermal efficiency of the boiler. From the parameters are design main dimensions and parameters heat-transfer surfaces and the boiler.
APA, Harvard, Vancouver, ISO, and other styles
8

Přikryl, Josef. "Změna palivové základny uhelného kotle." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417841.

Full text
Abstract:
The diploma thesis contains calculations of gasification of coal boiler. The first part of thesis contains stochiometric calculations, heat balance and calculations of combustion chamber. In the next part are calculations of heat exchange surfaces and at the end of this part are calculations of regenerative air heater and total boiler balance. Calculations are made by regard to investments costs, preservation of the steam parameters and keeps emissons limits.
APA, Harvard, Vancouver, ISO, and other styles
9

Zajíc, Josef. "Plynofikace uhelného kotle 210 t/h; 13,63 MPa; 540 °C." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230871.

Full text
Abstract:
This thesis aims to gas installation of the coal boiler and its thermal recount. In the first part, there is implemented calculation of the combusting chamber. After that follows the recalculation of heat exchange surfaces and proposal tube air heater, which will replace the existing air heater Ljungström. The emphasis is placed on the preservation of the exsiting steam parametrs and keeps emission limit of NOx.
APA, Harvard, Vancouver, ISO, and other styles
10

Vojtek, Marek. "Návrh termolejového kotle spalujícího dřevní štěpku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241703.

Full text
Abstract:
This master´s thesis is dealing with thermal-oil boiler fired with wood chips. In the first part is the conception of the boiler, created on the base of the search of thermal-oil boilers producers and defined fuel. In the next section is the heat-transfer, aerodynamic and hydraulic calculation. In the last part is the design of the boiler technologies. In the appendix is the projection drawing which includes all important information for the construction draft.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography