Dissertations / Theses on the topic 'Terramechanika'

This thesis aimed to develop deformable a virtual terrain which a vehicle can move in and interact with in a realistic manner. The theory used to calculate how the terrain influences the vehicle is based on terramechanics. The terrain is divided into two separate parts, one for visualization and one for physical collisions. Deformations of the graphical layer is calculated on the GPU using compute shader programming. The result of the thesis include a tech demo with a small landscape where an alternate terrain vehicle can deform the terrain as it moves around. The method for deforming the graphical layer is made in such a way so that the computational time does not increase as the size of the terrain does, making the method applicable to actual games.

This research has investigated the effect of tyre rutting of wheeled construction plant performance traversing in wet and deformable terrain, specifically clay and sand. The purpose was to translate the wheel rutting into performance reduction measured in drawbar-pull. The ultimate goal was to translate the power loss into practical effects on cost, time and other economic variations on construction projects that are characterised by movement of wheeled plant on long haulage deformable roads. In order to achieve this aim, mathematical modelling was deployed based on Newton’s laws of motion, principles of energy conservation and numerical integration. The model is based on a single rigid wheel because construction plant tyres are inflated to high pressure in order to support heavy loads thereby translating the flexible tyres into rigid mode. The results from the mathematical model were verified using a three stage robust verification process which included computational analysis based on two existing semi-empirical methods and real experimental data. Laboratory experiments using Mobility SF- 3713 were also used to check the validity of the results. The results from the mathematical model verify that a flexible tyre can operate in rigid mode if it encounters softer and wet ground. Results further indicate that the soil cohesion, angle of shearing resistance and moisture content play key roles in the subsequent power loss created by motion resistance. All the results from computational analysis and the experiments were found to be consistent with the mathematical model results. The study concludes that there is ample evidence to suggest that there is significant power loss associated with wheeled construction plant traversing in soft terrain which can be assessed. The study further concludes that a combination of economic decisions on variables must be considered with respect to existing ground conditions. This will considerably reduce uncertainty levels in cost and resource management on construction projects.

Mechanical systems always operate under some degree of uncertainty, which can be due to the inherent properties of the system parameters, to random inputs or external excitations, to poorly known parameters in the interface between different systems, or to inadequate knowledge of the dynamic process. Also, mechanical systems are large and highly nonlinear, while the magnitude of uncertainties may be very large. This dissertation addresses the critical need for understanding of the stochastic nature of mechanical system, especially vehicle and terramechanics systems, and need for developing efficient computational tools to model mechanical systems in the presence of parametric and external uncertainty. This dissertation investigates the influence of parametric and external uncertainties on vehicle dynamics and terramechanics. The uncertainties studied include parametric uncertainties, stochastic external excitations, and random variables between vehicle-terrain and vehicle-soil/snow interface. The methodology developed has been illustrated on a stochastic vehicle-terrain interaction model, a stochastic vehicle-soil interaction model, two stochastic tire-snow interaction models, and two stochastic tire-force relations. The uncertainties are quantified and propagated through vehicle and terramechanics systems using a polynomial chaos approach. Algorithms which can predict the geometry of the contact patch and the interfacial forces and torques on the vehicle-soil interfaces are developed. All stochastic models and algorithms are simulated for various scenarios and maneuvers. Numerical results are analyzed from the computational effort point of view, or from the angle of vehicle dynamics and terramechanics, and provide a deeper understanding of the evolution of stochastic vehicle and terramechanics systems. They can also be used in guiding vehicle design and development. This dissertation represents a pioneer study on stochastic vehicle dynamics and terramechanics. Moreover, the methodology developed is not limited to such systems. Any mechanical system with uncertainties can be treated using the polynomial chaos approach presented, considering their specific characteristics.<br>Ph. D.

Pneumatic tire friction on ice is an under-researched area of tire mechanics. This study covers the design and analysis of a series of pneumatic tire tests on a flat-level ice road surface. The terramechanics rig of the Advanced Vehicle Dynamics Lab (AVDL) is a single-wheel test rig that allows for the experimental analysis of the forces and moments on a tire, providing directly the data for the drawbar pull of said tire, thus supporting the calculation of friction based on this data. This indoor testing apparatus allows for some degree of replication by helping to maintain test conditions and by imposing a desired tire slip; the normal load, camber angle, toe angle, and other testing configurations can also be pre-set, as required. Methods of and issues related to controlling the production of ice and maintaining the conditions of numerous factors for each trial run were also documented. The AVDL terramechanics rig allowed for the collection of data from tests that varied the tire tread, tire inflation pressure, normal load on the wheel, and the slip ratio of the moving tire. This empirical data was then analyzed through the statistical analysis program JMP 8 in order to determine which factors (or combination of factors) significantly influence pneumatic tire friction on ice. The analysis verified that the slip ratio had a significant effect on the observed coefficient of friction, which decreased as the slip ratio increased. The combinations of the slip ratio and inflation pressure and the slip ratio and tire setup also had a significant effect on the observed coefficient of friction. The tests appear to have validated the theory that the drawbar pull and the traction was higher for the tire with tread.<br>Master of Science

Scientists have been well aware of the complexity of Martian and lunar regoliths. There are vast unexplored areas on both, the Moon and Mars, as well as uncertainties in our understanding of the physicochemical properties of their regoliths. Lunar and Martian regoliths differ from terrestrial soils in that they appear granular, but are expected to contain some cohesion. As such, cohesion in regolith poses challenges for future space operations, more specifically for landing, settlement, and mobility purposes. The ability to induce prescribed levels of cohesion in regolith simulants and reliably measure it would allow scientists to evaluate space technology limitations under different operational scenarios on Earth prior to a mission. Therefore, the objectives of this research were to (1) develop methods to induce prescribed levels of cohesion in dry granular media, and (2) evaluate accessible and reliable testing methods to measure cohesion. We developed and evaluated several methods to induce cohesion in two types of dry sand, F-75 silica sand and generic play sand. The methods to induce cohesion included play sand mixed with sugar-water, polymeric sand, and nanocellulose fibers, as well as F-75 sand mixed with polydimethylsiloxane, polyvinyl acetate, crystalline silica, agar, zero-valent iron, adhesive spray, and sand surface modification using a plasma gun. Each method was assessed for advantages and disadvantages, and laboratory specimens produced using the most promising methods were tested at different compositions and densities to measure cohesion. The laboratory methods used to measure the cohesion included direct shear test, simple direct shear test, and vertical cut test. The results from these tests were then compared to tensile strength tests, using a split box test. In addition, these tests were also performed on lunar simulants JSC-1A and GRC-3 at different densities. The direct shear apparatus was available, but the other three devices were fabricated as part of this work. Based on the research results, simple methods to potentially induce low levels of cohesion in dry granular media are suggested along with suitability of laboratory methods to measure the added cohesion.

Thesis (S.B.)--Massachusetts Institute of Technology, Department of Mechanical Engineering, 2013.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 44-45).<br>Unmanned Mars rovers are presented with the unique challenge of requiring autonomous driving control over rough, adverse territory. A software package, dubbed Artemis, was developed in order to model the expected forces and torques on a rover's drive wheels while traveling across unfamiliar Martian terrain. However, experimental testing must be done in order to validate this theoretical model. A test rig was developed by MIT's Robotic Mobility Group to measure the forces and torques on a single rover wheel as it traverses across a soil simulant of the Martian surface, and compared that measured data to the hypothetical results predicted by Artemis. A significant portion of this work is dedicated toward the determination of the proper soil simulant to use in the test rig. Several compositions of Mauricetown NJ70 material and SilCoSil 250 Ground Silica were tested in a direct shear test in order to distinguish the properties of the material at various concentrations. With its high residual stress, low peak strength, and large internal friction angle, a mixture of 75% NJ70 with 25% SilCoSil by weight was selected as the Martian soil simulant. The experimental data revealed that as slip values and vertical loads on the rover wheel increases, values for drawbar force, wheel torque, and sinkage generally increase as well, which are the same trends predicted by the Artemis software package. Supplementary testing will need to be completed for additional slip levels and vertical loads to further substantiate the results of the Artemis software. Moreover, additional testing should be done to characterize the test soil's properties, to directly compare the results of the Artemis model to the experimental figures.<br>by Gregory D. Puszko.<br>S.B.

Accurate and efficient tire models for deformable terrain operations are essential for performing vehicle simulations. Assessment of the forces and moments that occur at the tire-terrain interface, and the effect of the tire motion on properties of the terrain are crucial in understanding the performance of a vehicle. In order to model the dynamic behavior of the tire on different terrains, a lumped mass discretized tire model using Kelvin-Voigt elements is developed. To optimize the computational time of the code, different techniques were used in memory allocation, parameter initialization, code sequence, and multi-processing. This has resulted in significant improvements in efficiency of the code that can now run close to real time and therefore it is suitable for use by commercially available vehicle simulation packages. Model parameters are obtained using a validated finite element tire model, modal analysis, and other experimental test procedures. Experimental tests were performed on the Terramechanics rig at Virginia Tech. The tests were performed on different terrains; tire forces and moments, soil sinkage, and tire deformation data were collected for various case studies based on a design of experiment matrix. This data, in addition to modal analysis data were used to validate the tire model. Furthermore, to study the validity of the tire model, simulations at conditions similar to the test conditions were performed on a quarter car model. The results have indicated the superiority of this model as compared to other lumped parameter models currently available.<br>Ph. D.

The primary goal of this work is to design and implement a clutch and brake system on the single tire Terramechanics rig of Advanced Vehicle Dynamics Laboratory (AVDL) at Virginia Tech. This test rig was designed and built to study the performance of tires in off-road conditions on surfaces such as soil, sand, and ice. Understanding the braking performance of tires is crucial, especially for terrains like ice, which has a low coefficient of friction. Also, rolling resistance is one of the important aspects affecting the tractive performance of a vehicle and its fuel consumption. Investigating these experimentally will help improve tire models performance. The current configuration of the test rig does not have braking and free rolling capabilities. This study involves modifications on the rig to enable free rolling testing when the clutch is disengaged and to allow braking when the clutch is engaged and the brake applied. The first part of this work involves the design and fabrication of a clutch system that would not require major changes in the setup of the test rig; this includes selecting the appropriate clutch that would meet the torque requirement, the size that would fit in the space available, and the capability to be remotely operated. The test rig's carriage has to be modified in order to fit a pneumatic clutch, its adapter, a new transmission shaft, and the mounting frame for the clutch system. The components of the actuation system consisting of pneumatic lines, the pressure regulator, valves, etc., have to be installed. Easy operation of the clutch from a remote location is enabled through the installation of a solenoid valve. The second part of this work is to design, fabricate, and install a braking system. The main task is to design a customized braking system that satisfies the various physical and functional constraints of the current configuration of the Terramechanics rig. Some other tasks are the design and fabrication of a customized rotor, selection of a suitable caliper, and design and fabrication of a customized mounting bracket for the caliper. A hydraulic actuation system is selected since it is suitable for this configuration and enables remote operation of the brakes. Finally, the rig is upgraded with the assembly of these two systems onto it.<br>Master of Science

A differential steered, 13.6 kg robot was developed as an intelligent tire testing system and was used to investigate the potential of using piezoelectric film sensors in small tube-type pneumatic tires to characterize tire-ground interaction.<br />One focus of recent research in the tire industry has been on instrumenting tires with sensors to monitor the tire, vehicle, or external environment. On small robots, tire sensors that measure the forces and deflections in the contact patch could be used to improve energy efficiency and/or mobility during a mission.<br />The robot was assembled from a SuperDroid Robots kit and instrumented with low-cost piezoelectric film sensors from Measurement Specialties between the inner tube and the tire.  An unlaminated and a laminated sensor were placed circumferentially along the tread and an unlaminated sensor was placed along the sidewall.  A slip ring transferred the signals from the tire to the robot. There, the signal conditioning circuit extended the time constant of the sensors and filtered electromagnetic interference.  The robot was tested with a controlled power sequence carried out on polished cement, ice, and sand at three power levels, two payload levels, and with two tire sizes.<br />The results suggest that the sensors were capable of detecting normal pressure, deflection, and/or longitudinal strain.  Added payload increased the amplitude of the signals for all sensors.  On the smaller tires, sensors generally recorded a smaller, wider signal on sand compared to cement, indicating the potential to detect contact patch pressure and length.  The signals recorded by the unlaminated sensor along the tread of the smaller tire were lower on ice compared to cement, indicating possible sensitivity to tractive force.  Results were less consistent for the larger tires, possibly due to the large tread pattern.<br>Master of Science

This study focuses on conducting a benchmarking analysis for light wheeled and tracked robotic vehicles. Vehicle mobility has long been a key aspect of research for many organizations. According to the Department of Defense vehicle mobility is defined as, "the overall capacity to move from place to place while retaining its ability to perform its primary mission"[1]. Until recently this definition has been applied exclusively to large scale wheeled and tracked vehicles. With new development lightweight ground vehicles designed for military and space exploration applications, the meaning of vehicle mobility must be revised and the tools at our disposal for evaluating mobility must also be expanded. In this context a significant gap in research is present and the main goal of this thesis is to help fill the void in knowledge regarding small robotic vehicle mobility assessment. Another important aspect of any vehicle is energy efficiency. Thus, another aim of this study is to compare the energy needs for a wheeled versus tracked robot, while performing similar tasks. The first stage of the research is a comprehensive review of the state-of-the-art in vehicle mobility assessment. From this review, a mobility assessment criterion for light robots will be developed. The second stage will be outfitting a light robotic vehicle with a sensor suite capable of capturing relevant mobility criteria. The third stage of this study will be an experimental investigation of the mobility capability of the vehicle. Finally the fourth stage will include quantitative and qualitative evaluation of the benchmarking study.<br>Master of Science

The tire is one of the most complex subsystems of the vehicle. It is, however, the least understood of all the components of a car. Without a good tire model, the vehicle simulation handling response will not be realistic, especially for maneuvers that require a combination of braking/traction and cornering. Most of the simplified theoretical developments in tire modeling, however, have been limited to on-road tire models. With the availability of powerful computers, it can be noted that majority of the work done in the development of off-road tire models have mostly been focused on creating better Finite Element, Discrete Element, or Boundary Element models. The research conducted in this study deals with the development of a simplified tire brush-based tire model for on-road simulation, together with a simplified off-road wheel/tire model that has the capability to revert back to on-road trend of behavior on firmer soils. The on-road tire model is developed based on observations and insight of empirical data collected by NHSTA throughout the years, while the off-road tire model is developed based on observations of experimental data and photographic evidence collected by various terramechanics researchers within the last few decades. The tire model was developed to be used in vehicle dynamics simulations for engineering mobility analysis. Vehicle-terrain interaction is a complex phenomena governed by soil mechanical behavior and tire deformation. The theoretical analysis involved in the development of the wheel/ tire model relies on application of existing soil mechanics theories based on strip loads to determine the tangential and radial stresses on the soil-wheel interface. Using theoretical analysis and empirical data, the tire deformation geometry is determined to establish the tractive forces in off-road operation. To illustrate the capabilities of the models developed, a rigid wheel and a flexible tire on deformable terrain is implemented and output of the model was computed for different types of soils; a very loose and deformable sandy terrain and a very firm and cohesive Yolo loam terrain. The behavior of the wheel/tire model on the two types of soil is discussed. The outcome of this work shows results that correlate well with the insight from experimental data collected by various terramechanics researchers throughout the years, which is an indication that the model presented can be used as a subsystem in the modeling of vehicle-terrain interaction to acquire more insight into the coupling between the tire and the terrain.<br>Ph. D.

A significant number of studies address various aspects related to tire modeling; most are dedicated to the development of tire models for on-road conditions. Such models cover a wide range of resolutions and approaches, as required for specific applications. At one end of the spectrum are the very simple tire models, such as those employed in real-time vehicle dynamic simulations. At the other end of the spectrum are the very complex finite element models, such as those used in tire design. In between these extremes, various other models have been developed, at different levels of compromise between accuracy and computational efficiency. Existing tire models for off-road applications lag behind the on-road models. The main reason is the complexity added to the modeling due to the interaction with the soft soil. In such situations, one must account for the soil dynamics and its impact on the tire forces, in addition to those aspects considered for an on-road tire. The goal of this project is to develop an accurate and comprehensive, while also efficient, off-road tire model for soft soil applications. The types of applications we target are traction, handling, and vehicle durability, as needed to support current army mobility goals. Thus, the proposed approach is to develop a detailed semi-analytical tire model for soft soil that utilizes the tire construction details and parallels existing commercially available on-road tire models. The novelty of this project relies in developing a three-dimensional three-layer tire model employing discrete lumped masses and in improving the tire-soil interface model. This will be achieved by enhancing the resolution of the tire model at the contact patch and by accounting for effects and phenomena not considered in existing models.<br>Master of Science

The main goal of this study is to improve the understanding of the interaction between a pneumatic tire and deformable terrain. A design of experiments has been implemented, that gives insight into the effect of individual tire and soil parameters, specifically wheel slip, normal load, inflation pres-sure, and soil compaction, as well as into the effect of combinations of such parameters on the tire and soil behavior. The results of such test data is exceedingly relevant, providing significant infor-mation to tire design for tire manufacturers, to users for operating conditions selection, as well as providing modeling parameters for tire models. Moreover, experimental investigation of tire-soil interaction provides validation data for tire models operating under similar conditions. In support of the validation of a soft soil tire model currently being developed at Virginia Tech under the auspices of the Automotive Research Center, experimental work has been performed on a low-speed, indoor single-wheel tester built to investigate studies in terramechanics. The terramechanics rig provides a well-controlled environment to assure repeatable testing conditions and void vehicle component ef-fects. The test tire for the rig is instrumented with a wireless sensory system that measures tire de-flection at the contact patch; combining this system with other instruments of the rig allows accurate estimations of wheel sinkage. A methodical soil preparation procedure has rendered great data to analyze several relations, such as the drawbar pull and the sinkage dependency on slip. The data col-lected indicated that, when looking at the effect of individual parameters, by increasing the soil com-paction, the normal load, and by decreasing the inflation pressure will result in a higher normalized drawbar pull. A higher normal load under all conditions consistently lowered the max tire sinkage depth. The sinkage has increased dramatically with the slip ratio, growing threefold larger at high slip (70-90%) when compared to lower slip (0-5%) ratios.<br>Master of Science

More than 50 percent of the land area of the Nordic countries Finland, Norway, and Sweden are covered by dense forests and they are among the most important producers of forest products in the world. Forestry in these countries is based on sustainable management principles – reforestation follows harvesting. Furthermore, increasing demands for more gentle techniques and technologies with less negative impact on the environment ask for development and implementation of new processes and new machine solutions. The increasing interest in developing forest management approaches that are based on gentleness to the environment requires better understanding of the interaction between the forestry machines and the terrain in the harvesting process.<br><p>QC 20150827</p><br>Gentle Forest Machines

Tire performance over soft soil influences the performance of off-road vehicles on soft soil, as the tire is the only force transmitting element between the off-road vehicles and soil during the vehicle operation. One aspect of the tire performance over soft soil is the tire tractive performance on soft soil, and it attracts the attention of vehicle and geotechnical engineers. The vehicle engineer is interested in the tire tractive performance on soft soil because it is related to vehicle mobility and energy efficiency; the geotechnical engineer is concerned about the soil compaction, brought about by the tire traffic, which accompanies the tire tractive performance on soft soil. In order to improve the vehicle mobility and energy efficiency over soft soil and mitigate the soil compaction, it's essential to develop an in-depth understanding of tire tractive performance on soft soil. This study has enhanced the understanding of tire tractive performance on soft soil and promoted the development of terramechanics and tire model parameterization method through experimental tests. The experimental tests consisted of static tire deflection tests, static tire-soil tests, soil properties tests, and dynamic tire-soil tests. The series of tests (test program) presented herein produced parameterization and validation data that can be used in tire off-road traction dynamics modeling and terramechanics modeling. The 225/60R16 97S Uniroyal (Michelin) Standard Reference Test Tire (SRTT) and loamy sand were chosen to be studied in the test program. The tests included the quantification or/and measurement of soil properties of the test soil, pre-traffic soil condition, the pressure distribution in the tire contact patch, tire off-road tractive performance, and post-traffic soil compaction. The influence of operational parameters, e.g., tire inflation pressure, tire normal load, tire slip ratio, initial soil compaction, or the number of passes, on the measurement data of tire performance parameters or soil response parameters was also analyzed. New methods of the rolling radius estimation for a tire on soft soil and of the 3-D rut reconstruction were developed. A multi-pass effect phenomenon, different from any previously observed phenomenon in the available existing literature, was discovered. The test data was fed into optimization programs for the parameterization of the Bekker's model, a modified Bekker's model, the Magic Formula tire model, and a bulk density estimation model. The modified Bekker's model accounts for the slip sinkage effect which the original Bekker's pressure-sinkage model doesn't. The Magic Formula tire model was adapted to account for the combined influence of tire inflation pressure and initial soil compaction on the tire tractive performance and validated by the test data. The parameterization methods presented herein are new effective terramechanics model parameterization methods, can capture tire-soil interaction which the conventional parameterization methods such as the plate-sinkage test and shear test (not using a tire as the shear tool) cannot sufficiently, and hence can be used to develop tire off-road dynamics models that are heavily based on terramechanics models. This study has been partially supported by the U.S. Army Engineer Research and Development Center (ERDC) and by the Terramechanics, Multibody, and Vehicle (TMVS) Laboratory at Virginia Tech.<br>Doctor of Philosophy<br>Big differences exist between a tire moving in on-road conditions, such as asphalt lanes, and a tire moving in off-road conditions, such as soft soil. For example, for passenger cars commonly driven on asphalt lanes, normally, the tire inflation pressure is suggested to be between 30 and 35 psi; very low inflation pressure is also not suggested. By contrast, for off-road vehicles operated on soft soil, low inflation pressure is recommended for their tires; the inflation pressure of a tractor tire can be as low as 12 psi, for the sake of low post-traffic soil compaction and better tire traction. Besides, unlike the research on tire on-road dynamics, the research on off-road dynamics is still immature, while the physics behind the off-road dynamics could be more complex than the on-road dynamics. In this dissertation, experimental tests were completed to study the factors influencing tire tractive performance and soil behavior, and model parameterization methods were developed for a better prediction of tire off-road dynamics models. Tire or vehicle manufacturers can use the research results or methods presented in this dissertation to offer suggestions for the tire or vehicle operation on soft soil in order to maximize the tractive performance and minimize the post-traffic soil compaction.

The main aim of this diploma thesis is to determine the radius of rotation of selected tractors (Zetor Forterra 140 HSX, Zetor Proxima 120 Power and Zetor 7745 Turbo) on three different types of surfaces using different speeds. The literary part deals briefly with the importance and historical development of tractors, the basic knowledge of traction theory, the problems of forces acting on the rolling wheel, and last but not least the construction of the tractor parts. The practical part is mainly focused on determining the radii of rotation of individual tractors on three specified types of surfaces using the three given speeds. The discussion is mainly focused on comparing the radii of rotation meeting ČSN 30 0552 with the radii given by the tractor manufacturer.

This doctoral thesis extends analytical terramechanic modelling for small lightweight mobile robots operating on sandy soil. Previous terramechanic models were designed to capture and predict the mean values of the forces and sinkage that a wheel may experience. However, these models do not capture the fluctuations in the forces and sinkage that were observed in experimental data. The model developed through the course of this research enhances existing terramechanic models by proposing and validating a new pressure-sinkage relationship. The resulting two-dimensional model was validated with a unique high fidelity single-wheel testbed (SWTB) which was installed on a Blohm Planomat 408 computer-numerically controlled creepfeed grinding machine. The new SWTB translates the terrain in the horizontal direction while the drivetrain and wheel support systems are constrained in the horizontal direction but allowed to freely move in the vertical direction. The design of the SWTB allowed for a counterbalance to be installed and, as a result, low normal loads could be examined. The design also took advantage of the grinding machine's high load capacity and precise velocity control. Experiments were carried out with the new SWTB and predictable repeating ridges were found in the track of a smooth rigid wheel operating in sandy soil. To ensure that these ridges were not an artifact of the new SWTB a mobile robot was used to validate the SWTB findings, which it did. The new SWTB is a viable method for investigating fundamental terramechanic issues. A series of experiments at different slip ratios and normal loads were carried out on the SWTB to validate the new pressure-sinkage relationship which explicitly captures and predicts the oscillations about the mean values for the forces and sinkage values for both a smooth wheel and a wheel with grousers. The new pressure-sinkage relationship adds two new dimensionless empirical factors to the well known pressure-sinkage relationship for a rigid wheel. The first new factor accounts for changes in the local density of the terrain around the wheel and the second factor accounts for the effects grousers have on the forces and sinkage.

Indiana University-Purdue University Indianapolis (IUPUI)<br>In this thesis, an explicit time integration code which integrates multibody dynamics (MBD) and the discrete element method (DEM) is validated using three previously published steady-state physical experiments for non-cohesive sand-type material, namely: shear-cell for measuring shear stress versus normal stress; penetroplate pressure-sinkage test; and wheel drawbar pull-torque-slip test. The test results are used to calibrate the material properties of the DEM soft soil model and validate the coupled MBD-DEM code. All three tests are important because each test measures specific mechanical characteristics of the soil under various loading conditions. Shear strength of the soil as a function of normal load help to understand shearing of the soil under a vehicle wheel contact patch causing loss of traction. Penetroplate pressure-sinkage test is used to calibrate and validate friction and shear strength characteristics of the soil. Finally the rigid wheel-soil interaction test is used to predict drawbar pull force and wheel torque vs. slip percentage and normal stress for a rigid wheel. Wheel-Soil interaction test is important because it plays the role of ultimate validation of the soil model tuned in the previous two experiments and also shows how the soil model behaves in vehicle mobility applications. All the aforementioned tests were modeled in the multibody dynamics software using rigid bodies and various joints and actuators. The sand-type material is modeled using discrete cubical particles. A penalty technique is used to impose normal contact constraints (including particle-particle and particle-wall contact). An asperity-based friction model is used to model friction. A Cartesian Eulerian grid contact search algorithm is used to allow fast contact detection between particles. A recursive bounding box contact search algorithm enabled fast contact detection between the particles and polygonal body surfaces (such as walls, penetrometer, and wheel). The governing equations of motion are solved along with contact constraint equations using a time-accurate explicit solution procedure. The results show very good agreement between the simulation and the experimental measurements. The model is then demonstrated in a full-scale application of high-speed off-road vehicle mobility on the sand-type soil.

<p>In this thesis, an explicit time integration code which integrates multibody dynamics (MBD) and the discrete element method (DEM) is validated using three previously published steady-state physical experiments for non-cohesive sand-type material, namely: shear-cell for measuring shear stress versus normal stress; penetroplate pressure-sinkage test; and wheel drawbar pull-torque-slip test. The test results are used to calibrate the material properties of the DEM soft soil model and validate the coupled MBD-DEM code. All three tests are important because each test measures specific mechanical characteristics of the soil under various loading conditions. Shear strength of the soil as a function of normal load help to understand shearing of the soil under a vehicle wheel contact patch causing loss of traction. Penetroplate pressure-sinkage test is used to calibrate and validate friction and shear strength characteristics of the soil. Finally the rigid wheel-soil interaction test is used to predict drawbar pull force and wheel torque vs. slip percentage and normal stress for a rigid wheel. Wheel-Soil interaction test is important because it plays the role of ultimate validation of the soil model tuned in the previous two experiments and also shows how the soil model behaves in vehicle mobility applications.</p> <p><br></p> <p>All the aforementioned tests were modeled in the multibody dynamics software using rigid bodies and various joints and actuators. The sand-type material is modeled using discrete cubical particles. A penalty technique is used to impose normal contact constraints (including particle-particle and particle-wall contact). An asperity-based friction model is used to model friction. A Cartesian Eulerian grid contact search algorithm is used to allow fast contact detection between particles. A recursive bounding box contact search algorithm enabled fast contact detection between the particles and polygonal body surfaces (such as walls, penetrometer, and wheel). The governing equations of motion are solved along with contact constraint equations using a time-accurate explicit solution procedure. The results show very good agreement between the simulation and the experimental measurements. The model is then demonstrated in a full-scale application of high-speed off-road vehicle mobility on the sand-type soil.</p>

abstract: Vehicles traverse granular media through complex reactions with large numbers of small particles. Many approaches rely on empirical trends derived from wheeled vehicles in well-characterized media. However, the environments of numerous bodies such as Mars or the moon are primarily composed of fines called regolith which require different design considerations. This dissertation discusses research aimed at understanding the role and function of empirical, computational, and theoretical granular physics approaches as they apply to helical geometries, their envelope of applicability, and the development of new laws. First, a static Archimedes screw submerged in granular material (glass beads) is analyzed using two methods: Granular Resistive Force Theory (RFT), an empirically derived set of equations based on fluid dynamic superposition principles, and Discrete element method (DEM) simulations, a particle modeling software. Dynamic experiments further confirm the computational method with multi-body dynamics (MBD)-DEM co-simulations. Granular Scaling Laws (GSL), a set of physics relationships based on non-dimensional analysis, are utilized for the gravity-modified environments. A testing chamber to contain a lunar analogue, BP-1, is developed and built. An investigation of straight and helical grousered wheels in both silica sand and BP-1 is performed to examine general GSL applicability for lunar purposes. Mechanical power draw and velocity prediction by GSL show non-trivial but predictable deviation. BP-1 properties are characterized and applied to an MBD-DEM environment for the first time. MBD-DEM simulation results between Earth gravity and lunar gravity show good agreement with theoretical predictions for both power and velocity. The experimental deviation is further investigated and found to have a mass-dependant component driven by granular sinkage and engagement. Finally, a robust set of helical granular scaling laws (HGSL) are derived. The granular dynamics scaling of three-dimensional screw-driven mobility is reduced to a similar theory as wheeled scaling laws, provided the screw is radially continuous. The new laws are validated in BP-1 with results showing very close agreement to predictions. A gravity-variant version of these laws is validated with MBD-DEM simulations. The results of the dissertation suggest GSL, HGSL, and MBD-DEM give reasonable approximations for use in lunar environments to predict rover mobility given adequate granular engagement.<br>Dissertation/Thesis<br>Doctoral Dissertation Mechanical Engineering 2019

This study, conducted on August 12th and 13th, 2008 at Fort Riley, Kansas on a clay loam soil, evaluated the terrain impacts of four commonly used tracked and wheeled military vehicles: the M1A1 Abrams Main Battle Tank, M998 High Mobility Multipurpose Wheeled Vehicle, M985 Heavy Expanded Mobility Tactical Truck, and M113 Armored Personnel Carrier. Disturbed width and impact severity were assessed along 14 spirals subjected to a maximum of eight consecutive passes for a total of 696 impact points. Data indicate that multiple passes produce increased vegetative impacts, with multipass coefficients ranging from 0.98 to 4.44 (compared to the commonly accepted value of 2.00) depending on vehicle type and turn severity. The widely-used MPC of 2.00 fits the M985 HEMTT and M113 at sharp turns, with an MPC of 1.00 fitting the straight and intermediate turning conditions of these vehicles, as well as all turning conditions for the M998 HMMWV. For the M1A1, a MPC of 2.00 is suitable for straight paths, a MPC of 3.00 is suitable for intermediate turns, while sharp turns can be represented by a MPC of 4.00. The data suggests that MPCs should be adjusted depending on the vehicle type and according to the turning radius of the vehicle, as tracked vehicles were found to have a higher multipass coefficient than wheeled vehicles, with multipass coefficients increasing with vehicle weight and the sharpness of turns.