Dissertations / Theses on the topic 'Teslas'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Teslas.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Leprince, Yann. "Imagerie des couches corticales par résonance magnétique à 7 teslas." Thesis, Paris 11, 2015. http://www.theses.fr/2015PA112022/document.
This thesis presents the development of a methodology for the analysis of the layered structure of the cerebral cortex, using high-field magnetic resonance imaging (7-tesla MRI). While cortical layers are traditionally studied using microscopic imaging of post-mortem tissue slices, the use a non-invasive technique such as MRI will enable in vivo studies, and thus allow new approaches beyond the use of classical architectural atlases such as Brodmann's.Two imaging methodologies have been used to acquire high-resolution images. First, a method based on super-resolution reconstruction from thick slices acquired in different geometries was developed for in vivo imaging. Second, a three-dimensional imaging sequence optimized for post-mortem tissue allowed imaging excised brain specimen.The main contribution of this thesis consists of a pair of methods that perform an automatic extraction of cortical profiles, which characterize the laminar architecture at any cortical location. In order to allow robust extraction of these profiles, an original model of the influence of cortical curvature was developed and implemented.These methods were tested and validated on multiple brain specimen. This work allows envisaging an automatic microarchitectural characterization of cortical areas, and even architectural parcellation, using high-field MRI
Goebel, Jean-Christophe. "Etude IRM du vieillissement articulaire à 1.5 et 7 Teslas : Approches volumiques et cartographiques." Thesis, Nancy 1, 2009. http://www.theses.fr/2009NAN10108/document.
Osteoarthritis (OA) is a common disease observed in elderly population and characterized by a progressive destruction of cartilaginous tissue. The clinical diagnosis of this disease is realized by conventional radiography. This method allows visualizing bone modifications related to OA disease (cysts, subchondral bone thickening, and osteophytes) but is unable to assess directly cartilage structure. Due to its high spatial resolution and high contrast between tissues, Magnetic Resonance Imaging (MRI) is able to visualize the cartilage structure and to differentiate it from adjacent structures (bone, synovial tissue, menisci, and synovial fluid). We have employed MRI potentialities at high magnetic field (7 Teslas) to follow, in vivo, cartilage modifications in the rat femoro-tibial articulation. This methodology was used to evaluate normal cartilage ageing-process and to assess an experimental OA model (anterior cruciate ligament transaction). These works showed an age-related cartilage volumetric and thickness decrease, as well as femoral cartilage damages and tibial cartilage oedema in OA knees. In a second part of our work, we applied T2 mapping and volumetric techniques (at 1.5 T) to determine variations which occur in the elderly human patellar cartilage. Results demonstrated the capacity of T2 mapping to early detect matricial modifications before any cartilage volumetric impact can be found. At least, our last study, always at 1.5 T, focused on the synovial membrane volume and inflammatory activity by taking into account a human population suffering from knee OA
Freitas, Lincoln da Silva. "Estudo anatômico do tronco encefálico por imagens de ressonância magnética de 3 Teslas e correlação com cortes histológicos." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/17/17140/tde-27072016-155314/.
The Brainstem is a unique structure of the central nervous system, because in it pass ascending sensory tracts of the spinal cord, sensory tracts of head and neck, descending tracts originated in the forebrain, the pathways linked to eye movement centers, contains nuclei of cranial nerves, and is also involved in regulating the level of consciousness through projections to the forebrain that arise from the reticular formation. All these estructures are packed into a very small space which makes the brainstem a particularly sensitive place to pathological changes, that bring up a large amount of neurological signs due to very close packing of the aforementioned structures.Understanding the internal anatomy of the brainstem is essential for the neurological diagnosis and the clinical medicine practice. Thus, the brainstem is fertile ground for the study through diagnostic imaging, especially when performed by new technologies such as high-field (3 tesla) MRI machines. However, little is known about the correlation between the microscopy and magnetic resonance imaging of the brainstem. The aim of this study was to analyze and correlate the various structures found in the brainstem, viewed in microscopic slides of human brains post mortem, with the magnetic resonance imaging thereof, prior to dissection, mapping them and defining them, thus contributing to more accurate diagnoses and surveying of pathologies that affect the brainstem. Human brains (n = 3) were submerged in a container containing water, and then sealed so that the ambient air does not enter the container. MRI images were acquired in gradient echo sequence (FFE) 2D 3T field equipment (PHILIPS ACHIEVA) with coil 8- channel brain. It was used TE = 9.0 ms, TR = 1000 ms and flip angle 90°; number of averages equal to 10 and BW per pixel equal to 72 Hz/pixel. Factor PPE used was equal to one and the spatial resolution of FOV with 0,219x0,219x2,0 mm3 210x210x90mm3. The total acquisition time was 3 hours, 01 minute and 96 seconds. Histological images used in this study are from the pathology department of State University of Campinas (UNICAMP) database and compared to images obtained in MRI. We demonstrated that it was possible to identify histologically visible structures in images acquired with sufficient resolution and definition to generate an magnetic resonance imaging atlas of the brainstem sections
Carneiro, H?rica Priscila de Ara?jo. "Testes de hip?teses em modelos de sobreviv?ncia com Fra??o de cura." Universidade Federal do Rio Grande do Norte, 2012. http://repositorio.ufrn.br:8080/jspui/handle/123456789/18644.
Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior
Survival models deals with the modeling of time to event data. However in some situations part of the population may be no longer subject to the event. Models that take this fact into account are called cure rate models. There are few studies about hypothesis tests in cure rate models. Recently a new test statistic, the gradient statistic, has been proposed. It shares the same asymptotic properties with the classic large sample tests, the likelihood ratio, score and Wald tests. Some simulation studies have been carried out to explore the behavior of the gradient statistic in fi nite samples and compare it with the classic statistics in diff erent models. The main objective of this work is to study and compare the performance of gradient test and likelihood ratio test in cure rate models. We first describe the models and present the main asymptotic properties of the tests. We perform a simulation study based on the promotion time model with Weibull distribution to assess the performance of the tests in finite samples. An application is presented to illustrate the studied concepts
Modelos de sobreviv?ncia tratam do estudo do tempo at? a ocorr?ncia de um evento. Contudo em algumas situa??es, uma propor??o da popula??o pode n?o estar mais sujeita a ocorr?ncia deste evento. Modelos que tratam desta abordagem s?o chamados de modelos de fra??o de cura. Existem poucos estudos na literatura sobre testes de hip?teses aplicados a modelos de fra??o de cura. Recentemente foi proposta uma nova estat?stica de teste, denominada estat?stica gradiente que possui distribui??o assint?tica equivalente a das estat?sticas usuais. Alguns estudos de simula??o v?m sendo desenvolvidos no sentido de explorar caracter?sticas dessa nova estat?stica e comparar com as estat?sticas cl?ssicas, aplicadas a diferentes modelos. Este trabalho tem como principal objetivo estudar e comparar o desempenho do teste gradiente e do teste da raz?o de verossimilhan?as, em modelos de fra??o de cura. Para isso descrevemos caracter?sticas do modelo e apresentamos os principais resultados assint?ticos dos testes. Consideramos um estudo de simula??o com base no modelo de tempo de promo??o com distribui??o Weibull, para avaliar o desempenho dos testes em amostras finitas. Uma aplica??o e realizada para ilustrar os conceitos estudados
Couto, César Francisco de Moura. "Predicting software defects with causality tests = Predizendo defeitos de software com testes de causalidade." Universidade Federal de Minas Gerais, 2013. http://hdl.handle.net/1843/ESBF-9GMMLN.
Predição de defeitos é uma área de pesquisa em engenharia de software que objetiva identificar os componentes de um sistema de software que são mais prováveis de apresentar defeitos. Apesar do grande investimento em pesquisa objetivando identificar uma maneira efetiva para predizer defeitos em sistemas de software, ainda não existe uma solução amplamente utilizada para este problema. As atuais abordagens para predição de defeitos apresentam pelo menos dois problemas principais. Primeiro, a maioria das abordagens não considera a idéia de causalidade entre métricas de software e defeitos. Mais especificamente, os estudos realizados para avaliar as técnicas de predição de defeitos não investigam em profundidade se as relações descobertas indicam relações de causa e efeito ou se são coincidências estatísticas. O segundo problema diz respeito a saída dos atuais modelos de predição de defeitos. Tipicamente, a maioria dos modelos indica o número ou a existência de defeitos em um componente no futuro. Claramente, a disponibilidade desta informação é importante para promover a qualidade de software. Entretanto, predizer defeitos logo que eles são introduzidos no código é mais útil para mantenedores que simplesmente sinalizar futuras ocorrências de defeitos. Para resolver estas questões, nós propomos uma abordagem para predição de defeitos centrada em evidências mais robustas no sentido de causalidade entre métricas de código fonte (como preditor) e a ocorrência de defeitos. Mais especificamente, nós usamos um teste de hipótese estatístico proposto por Clive Granger (Teste de Causalidade de Granger) para avaliar se variações passadas nos valores de métricas de código fonte podem ser usados para predizer mudanças em séries temporais de defeitos. Nossa abordagem ativa alarmes quando mudanças realizadas no código fonte de um sistema alvo são prováveis de produzir defeitos. Nós avaliamos nossa abordagem em várias fases da vida de quatro sistemas implementados em Java. Nós alcançamos um precisão média maior do que 50% em três dos quatro sistemas avaliados. Além disso, ao comparar nossa abordagem com abordagens que não são baseadas em testes de causalidade, nossa abordagem alcançou uma precisão melhor.
Sebastiani, Renate Grings. "An?lise de erros em testes de hip?teses : um estudo com alunos de engenharia." Pontif?cia Universidade Cat?lica do Rio Grande do Sul, 2010. http://tede2.pucrs.br/tede2/handle/tede/3398.
Esta investiga??o tem como objetivo analisar os erros cometidos por alunos dos cursos de Engenharia nas provas semestrais em que os conte?dos avaliados s?o os testes de hip?teses. Estes est?o inclu?dos na ementa da disciplina de Probabilidade e Estat?stica e s?o a parte mais vis?vel da estat?stica em artigos cient?ficos. Entend?-los ? parte b?sica da liter?cia estat?stica para a compreens?o da literatura acad?mica e cient?fica. Na literatura, s?o encontrados alguns estudos sobre dificuldades e erros, mas o tema ainda carece de investiga??es. Este trabalho, portanto, consiste em classificar os erros identificados nas solu??es dos alunos, fazendo um comparativo com a literatura da ?rea, al?m de analisar as respostas dadas a um question?rio aplicado aos professores das turmas participantes, sobre as poss?veis causas dos erros. Foram participantes desta pesquisa sete turmas de tr?s universidades ga?chas e, tamb?m, seis professores que lecionam a disciplina. As respostas analisadas referem-se aos testes para uma amostra, totalizando 178 respostas sobre o teste para a m?dia (com desvio padr?o desconhecido) e 179 respostas sobre o teste para a propor??o. Os erros foram classificados em sete categorias, e observou-se que as maiores dificuldades dos alunos est?o relacionadas ? formula??o da conclus?o, ou seja, ? etapa da interpreta??o dos resultados. Os professores que responderam ao question?rio consideram, em geral, que os alunos n?o compreendem a estrutura dos testes de hip?teses e, tamb?m, que lhes faltam pr?-requisitos, como conhecimentos matem?ticos elementares e de interpreta??o de textos. Ainda, apontam a falta de aten??o, de estudo e de realiza??o de exerc?cios como poss?veis causas dos erros. Os resultados sugerem que, no ensino deste conte?do, seja dada mais ?nfase aos conceitos envolvidos do que aos procedimentos e c?lculos, como forma de promover a aprendizagem significativa.
Aguas, Alexandra. "Tesla's Totally True Adventures." Digital Commons at Loyola Marymount University and Loyola Law School, 2021. https://digitalcommons.lmu.edu/etd/977.
Dieringer, Matthias [Verfasser]. "Schnelle zweidimensionale Kartierung der longitudinalen Relaxationszeit T1 bei 1.5 Tesla, 3 Tesla und 7 Tesla mittels Magnetresonanztomographie / Matthias Dieringer." Berlin : Medizinische Fakultät Charité - Universitätsmedizin Berlin, 2014. http://d-nb.info/1062536673/34.
Yetişir, Filiz. "Parallel radiofrequency transmission for 3 Tesla and 7 Tesla magnetic resonance imaging." Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/113982.
Cataloged from PDF version of thesis.
Includes bibliographical references (pages 141-146).
Magnetic resonance imaging (MRI) is a noninvasive imaging technique with high soft tissue contrast. MR scanners are characterized by their main magnetic field strength. Commercially available clinical MR scanners commonly have main field strengths of 1.5 and 3 Tesla. Researchers increasingly explore clinical benefits of higher field strength scanners as they provide higher signal to noise ratio and higher resolution images. On the other hand, higher field strength imaging comes with increased image shading leading to non-uniform image contrast. Moreover, the tissue heating rate due to radiofrequency (RF) energy deposition (also called specific absorption rate or SAR) increases, limiting the imaging speed. Parallel RF transmission (pTx) was proposed to address both of these challenges by optimization of RF pulses transmitted from multiple independent channels simultaneously. However, both the RF pulse design and RF safety management become more complicated with pTx. In this work, a framework to apply pTx to 3T fetal and 7T brain imaging is developed to address the image shading and high SAR issues. Fetal imaging where a large pregnant torso is imaged rapidly to avoid fetal motion artifacts, suffers from similar levels of image shading and imaging limitations by SAR to 7T brain MRI. Hence the same techniques benefit both application domains. First, a SAR constrained pTx RF pulse design technique is developed for slice selective high flip angle imaging which is clinically the most common imaging technique. Next, the performance of the developed technique in reducing SAR and the image contrast non-uniformity is demonstrated through simulations and in phantom experiments for 7T brain imaging. Then, a comprehensive RF safety workflow for an 8 channel pTx system at 7T is developed. Finally, the potential of pTx for fetal imaging at 3T is demonstrated with simulation studies and a protected fetus mode of pTx was created using additional constraints in the RF pulse design. By addressing the two main RF transmission challenges associated with high and ultrahigh field MRI, this work aims to help bring the benefits of 7T brain imaging into routine clinical use and significantly improve the clinical experience for 3T fetal imaging.
by Filiz Yetişir.
Ph. D.
Lundqvist, Nathalie, and Olivia Jönsson. "“Livet vi lever är jettat, därför många vill testa. Jalla, kom testa, ra-ta-ta-ta från en Tesla” : En tematisk och språklig innehållsanalys om gangsterrapens normalisering och uppmuntran av kriminalitet." Thesis, Hälsohögskolan, Jönköping University, HHJ, Avd. för socialt arbete, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-49563.
Gangsterrapen har toppat de svenska musiklistorna de senaste åren och musikgenrens kontroversiella budskap har fått människor i samhället att ifrågasätta vad gangsterrapens budskap förmedlar. Syftet med studien är att undersöka på vilket sätt en normalisering och uppmuntran av kriminalitet präglas i de nutida låttexterna och hur män och kvinnor skildras i koppling till samhällets maktaspekter. Metodvalet är en kvalitativ tematisk och språklig innehållsanalys med syftet att kunna granska låttexternas betydelse på djupet. Studien har genomförts på de 24 låtarna som har streamats flest antal gånger enligt P3’s DigiLista sedan 2018. Av resultatet framkommer att gangsterrapen uppmuntrar och romantiserar kriminalitet genom dess val av personliga pronomen och semantiken i låttexterna. Kvinnor och män skildras på ett ojämlikt sätt, där kvinnor framställs som objektifierade gentemot den hegemoniska manligheten som maskulina män likställs med. Makt har påvisats vara ett dominerande begrepp genom hela resultatanalysen och maktaspekten har förmedlat olika synvinklar i respektive tema. Makten som gangsterraparna får genom deras eftertraktade musik bidrar till att de kan komma att uppmuntra till kriminella handlingar genom deras val av språkbruk.
Gomes, Nuno Filipe Rodrigues. "Equity research - Tesla, Inc." Master's thesis, Instituto Superior de Economia e Gestão, 2017. http://hdl.handle.net/10400.5/15102.
O objetivo deste projeto é determinar o valor da ação da Tesla em 31 de dezembro de 2018. Começamos por explicar o negócio da Tesla e os seus produtos. Depois damos a conhecer os administradores executivos e não executivos da empresa. A isto segue-se a análise das três indústrias onde a Tesla opera: automóvel, armazenamento de energia e energia solar. Em seguida, identificamos as vantagens competitivas da Tesla, que são muitas na indústria automóvel. Fazemos também uma análise SWOT para identificar os seus pontos fortes e fracos, bem como as oportunidades e ameaças que a rodeiam. Depois de conhecer a empresa, passamos para a fase de análise financeira. Descobrimos que a Tesla relatou fluxos de caixa livres negativos em quase todos os anos desde que se tornou uma empresa cotada em 2009. Apesar disso, a empresa não teve problemas em financiar-se nos mercados e tem uma capitalização de mercado elevadíssima, que é superior, em 9 biliões de dólares, à da Ford, uma fabricante que produziu 75 vezes mais carros que a Tesla em 2016. De seguida, prevemos o desempenho futuro de Tesla, principalmente com recurso à análise regressiva dos resultados financeiros passados. Nós derivamos o preço target de 321 dólares para 31 de Dezembro de 2018 usando uma abordagem que dá uma peso igual a 3 métodos de avaliação diferentes. Nós acabamos recomendando a venda da ação da Tesla e identificando os catalisadores que irão diminuir o valor das ações para o nosso preço-alvo.
The purpose of this project is to determine the value of Tesla stock as of December 31, 2018. We start by explaining Tesla's business and its products. Then, we focus on the firm's management and board of directors. This is followed by the analysis of the three industries where Tesla operates: automotive, energy storage and solar energy. Next, we identify Tesla's competitive advantages, which are many in the automotive industry. We also do a SWOT analysis in order to identify its internal strengths and weaknesses, as well as its external opportunities and threats. After we get to know the company, we move to the financial analysis phase to see how the company has performed in the last years. We discovered that Tesla has been reporting negative free cash flows for nearly every year since its IPO in 2009. Despite this, the company has not had any problems getting money in the markets and it has an extraordinary market capitalization, which is higher, by $9 billion, than Ford's, a carmaker with a production volume 75 times greater. Next, we forecast Tesla' s future performance, which mostly based on regression analysis of the historical financials, and with the results, we value Tesla stock. We derive our December 31, 2018 price target of $321 using a blended approach that gives equal weightage to three different valuation methods. We culminate by recommending to sell/short Tesla stock and identifying the catalysts that will decrease the stock value to our target price.
info:eu-repo/semantics/publishedVersion
Jansson, Tobias. "Provkunskaper : Vilka kunskaper testas i geografiprov?" Thesis, Linköpings universitet, Avdelning för geografi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-68251.
Liapine, Alexei. "Strahllagemonitor für das TESLA-Energiespektrometer." [S.l.] : [s.n.], 2003. http://deposit.ddb.de/cgi-bin/dokserv?idn=970204310.
McIntyre, D. J. O. "NMR microscopy at 9.4 Tesla." Thesis, University of Cambridge, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.386215.
Arias, Alderete Cattia Cecilia, Córdova Telmo Ricardo Barba, and de Zevallos Gonzáles Vigil Verónica Ortiz. "Plan estratégico para Tesla Inc." Master's thesis, Universidad del Pacífico, 2019. http://hdl.handle.net/11354/2326.
Serva, Romo Michael Juan, Basagoitia Julio Antonio Rojas, and Vilchez Roberto Huaro. "Planeamiento estratégico Tesla 2019-2021." Master's thesis, Universidad del Pacífico, 2019. http://hdl.handle.net/11354/2612.
Wagner, Susi. "MRT-basierte Volumetrie und T2-Zeit-Bestimmung bei 3 Tesla und 1,5 Tesla am Patellarknorpel." Diss., kostenfrei, 2008. http://edoc.ub.uni-muenchen.de/8584/.
Cheng, Bastian Jia-Luo [Verfasser]. "Myokardiale MRT-Perfusionsbildgebung bei 3 Tesla im Vergleich zu 1,5 Tesla / Bastian Jia-Luo Cheng." Bonn : Universitäts- und Landesbibliothek Bonn, 2011. http://d-nb.info/1016012969/34.
Andrade, Max Dorian [Verfasser], and Jens [Akademischer Betreuer] Theysohn. "Magnetfeldinduzierte vestibuläre Effekte bei 7-Tesla-MRT-Untersuchungen im Vergleich zu 1,5 Tesla und 0 Tesla / Dorian Rafael Ernesto Nikolas Andrade Max ; Betreuer: Jens Theysohn." Duisburg, 2020. http://d-nb.info/1219468002/34.
Loose, La?s Helen. "Avalia??o e corre??es de testes de hip?teses em modelos de sobreviv?ncia com fra??o de cura." Universidade Federal do Rio Grande do Norte, 2016. http://repositorio.ufrn.br/handle/123456789/21097.
Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2016-08-04T21:23:34Z (GMT) No. of bitstreams: 1 LaisHelenLoose_DISSERT.pdf: 712961 bytes, checksum: 81e1f59eee5a277cc753d5a69895998a (MD5)
Made available in DSpace on 2016-08-04T21:23:34Z (GMT). No. of bitstreams: 1 LaisHelenLoose_DISSERT.pdf: 712961 bytes, checksum: 81e1f59eee5a277cc753d5a69895998a (MD5) Previous issue date: 2016-02-15
Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior (CAPES)
Os modelos de sobreviv?ncia tratam do estudo do tempo at? a ocorr?ncia de um evento de interesse. Em algumas situa??es, uma propor??o da popula??o pode n?o estar mais sujeita ? ocorr?ncia do evento. Nesse contexto surgiram os modelos com fra??o de cura. Dentre os modelos que incorporam uma fra??o de curados um dos mais conhecidos ? o modelo tempo de promo??o. No presente trabalho abordamos infer?ncias em termos de testes de hip?teses no modelo tempo de promo??o assumindo a distribui??o Weibull para os tempos de falha dos indiv?duos suscet?veis. Os testes de hip?teses nesse modelo podem ser realizados com base nas estat?sticas da raz?o de verossimilhan?as, gradiente, escore ou Wald. Os valores cr?ticos s?o obtidos atrav?s de aproxima??es assint?ticas, que podem conduzir a distor??es no tamanho do teste em amostras de tamanho finito. Nesse sentido, o presente trabalho prop?e corre??es via bootstrap para os testes mencionados e Bartlett bootstrap para a estat?stica da raz?o de verossimilhan?as no modelo tempo de promo??o Weibull. Por meio de simula??es de Monte Carlo comparamos o desempenho em amostras finitas das corre??es propostas com os testes usuais. Os resultados num?ricos obtidos evidenciam o bom desempenho das corre??es propostas. Ao final do trabalho ? apresentadaumaaplica??o a dados reais.
Survival models deals with the modelling of time to event data. In certain situations, a share of the population can no longer be subjected to the event occurrence. In this context, the cure fraction models emerged. Among the models that incorporate a fraction of cured one of the most known is the promotion time model. In the present study we discuss hypothesis testing in the promotion time model with Weibull distribution for the failure times of susceptible individuals. Hypothesis testing in this model may be performed based on likelihood ratio, gradient, score or Wald statistics. The critical values are obtained from asymptotic approximations, which may result in size distortions in nite sample sizes. This study proposes bootstrap corrections to the aforementioned tests and Bartlett bootstrap to the likelihood ratio statistic in Weibull promotion time model. Using Monte Carlo simulations we compared the nite sample performances of the proposed corrections in contrast with the usual tests. The numerical evidence favors the proposed corrected tests. At the end of the work an empirical application is presented.
Haro, Alvarado Hermes Christian, Palacios Susana Lisseth Reynoso, and Durán Juliana Cecilia Alvarado. "Caso Tesla : plan estratégico 2019-2021." Master's thesis, Universidad del Pacífico, 2019. http://hdl.handle.net/11354/2530.
test, test. "test : testar." Thesis, Kungl. Musikhögskolan, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kmh:diva-2856.
Jesus, Sofia Isabel Castro de. "Métodos de testes aplicacionais." Master's thesis, Instituto Superior de Economia e Gestão, 2013. http://hdl.handle.net/10400.5/6398.
A atividade de Testes Aplicacionais é uma componente integrante do ciclo de desenvolvimento de uma aplicação. Inicialmente, esta tarefa estava intrinsecamente ligada à própria atividade de programação, não existindo uma definição propriamente dita. A sua evolução passou pelo desenvolvimento de técnicas, ferramentas e processos próprios que ainda hoje são alvo de melhoria. Nesta dissertação foi estudada a evolução dos Testes aplicacionais, o seu conceito, objetivos e tipos. Pretende-se demonstrar a importância dos Testes Aplicacionais, nomeadamente, dos Testes Funcionais e quais são os critérios de escolha de um método de Testes Funcionais adequado a um determinado negócio. Das pesquisas efetuadas foi elaborado uma revisão da literatura e para complementar foi efetuado um Estudo de Caso numa instituição bancária onde foi estudado o seu método de execução de Testes Funcionais. O principal resultado obtido foi a definição dos critérios de seleção de um método de Testes Funcionais. Esses critérios passam pela cultura da empresa, boas práticas, a tecnologia adotada, os custos e os próprios modelos de desenvolvimento de software.
Applicational Testing activity is an important component of the application development cycle. Initially this activity was intrinsically linked to the programming activity, but there wasn’t a specific definition. Its evolution passed through the development of techniques, tools and processes that today still are being improved. In this dissertation it was studied the Applicational Testing evolution, its concept, objectives and types. The focus of this study lies on Functional Tests, which are a type of Applicational Testing, and the respective methods. We intend to demonstrate the importance of Applicational Testing, mainly the Functional Testing and which are the criteria for choosing the appropriate method of Functional Tests that suits best for a particular business. For this research, a literature review was carried out, as well, in a banking institution a case study was elaborated in which their method of performing Functional Testing was studied. The main result that was bought about was the selection criteria for the functional testing method. Those criteria are: organizational culture, well-practice, the adopted technology, costs and the own models for software development.
Tricoli, Valmor Alberto Augusto. "Analise da potencia nos musculos extensores do joelho em jogadores de basquetebol e voleibol do sexo masculino." reponame:Repositório Institucional da UFSC, 1994. http://repositorio.ufsc.br/xmlui/handle/123456789/76097.
Mihai, Georgeta. "Methods for brain iron evaluation in normal aging T2 and phase measurements at 3 tesla and 7 tesla /." Columbus, Ohio : Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1189791295.
Harenberg, Mareile [Verfasser]. "Kardiale Bildgebung in einem offenen 1,0 Tesla-Magnetresonanztomographen und Vergleich mit einem konventionellen 1,5 Tesla Tunnelsystem / Mareile Harenberg." Berlin : Medizinische Fakultät Charité - Universitätsmedizin Berlin, 2020. http://d-nb.info/1223927946/34.
Grohmann, Sandra Zampieri. "Vigas de madeira laminada colada com laminas pre-classificadas de eucalyptus grandis." reponame:Repositório Institucional da UFSC, 1998. http://repositorio.ufsc.br/xmlui/handle/123456789/77559.
Made available in DSpace on 2012-10-17T05:21:16Z (GMT). No. of bitstreams: 0Bitstream added on 2016-01-09T00:11:16Z : No. of bitstreams: 1 148288.pdf: 19665288 bytes, checksum: c05ca183844e0dfb1dc10622b78d60d7 (MD5)
Comprovar a viabilidade de realização e desempenho de vigas de madeira laminada colada de Eucalyptus grandis classificadas de acordo com sua rigidez cujas lâminas estão divididas em classes de resistência onde o parâmetro de comparação é o módulo de elasticidade longitudinal. Para isso caracterizou-se física e mecanicamente a madeira e fez-se a classificação das laminas em grupos de acordo com o módulo de elasticidade, de modo a formar três conjuntos de vigas. Estes conjuntos foram ensaiados e identificado o de melhor desempenho
Wadhwa, Preeti H. "Secure building automation system using Tesla protocol." Thesis, California State University, Long Beach, 2015. http://pqdtopen.proquest.com/#viewpdf?dispub=1601311.
Wireless broadcast communication systems are continuously facing many threats in terms of various security attacks on the network. Broadcast communication has well known advantages in large scale networks such as building automation system, home automation and more. The need for verification and authentication in the broadcast communication had motivated us to develop a unique security algorithm for a robust authentication mechanism. This project proposes a unique methodology that combines the advantage of the gradient based routing and cryptography in a network. For implementation of the proposed algorithm, an example of building automation has been used. Principles of TESLA protocol were considered, and modified to craft a novel approach that provides a highly secure broadcast authentication mechanism in the building automation system. Implementation and results produced during the development phase of the project affirms the effectiveness of the proposed algorithm.
Bingham, Kathryn Ruth. "In vivo '1'3C spectroscopy at 3 Tesla." Thesis, University of Nottingham, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.262964.
Castro, Alva Katherine Melissa, Paredes Claudia Hernández, and Manrique Diana Marcos-Sánchez. "Plan estratégico para Tesla Motors 2018-2021." Master's thesis, Universidad del Pacífico, 2019. http://hdl.handle.net/11354/2536.
Sousa, André Roberto de. "Desenvolvimento de uma tecnica de ensaio-não-destrutivo utilizando holografia eletronica para detecção de defeitos em cilindros revestidos com borracha." reponame:Repositório Institucional da UFSC, 1994. https://repositorio.ufsc.br/xmlui/handle/123456789/157834.
Made available in DSpace on 2016-01-08T18:39:20Z (GMT). No. of bitstreams: 1 98097.pdf: 16110861 bytes, checksum: 77f29fdd76c4d31699853a892609f4d5 (MD5) Previous issue date: 1994
Demonstração teórica e experimental dos conceitos e potencialidades da holografia eletrônica como uma ferramenta efetiva de análise experimental em ensaios não destrutivos para detecção de defeitos. Apresenta-se uma abordagem genérica sobre os ensaios não destrutivos, discutindo sua importância e tendências atuais, e reunindo informações acerca das potencialidades e limitações das principais técnicas utilizadas em ensaios de materiais e peças. Dentre estas técnicas, verificou-se que nenhuma traz uma solução satisfatória para o problema analisado: descolamentos na interface metal-borracha de cilindros revestidos, utilizados em laminação. Aplicando a holografia eletrônica e analisando-se em profundidade este problema, de interesse de um setor industrial, foram desenvolvidos dispositivos e métodos de ensaio que possibilitaram a identificação destes defeitos internos e de outras imperfeições contrutivas presentes nos cilindros revestidos. Procurando tornar estas imperfeições mais perceptíveis, foram testados e implementados métodos de processamento de imagens, por meio dos quais conseguiu-se uma interpretação qualitativa mais fácil e direta dos resultados da holografia eletrônica.
Palma, Nuno Alexandre. "Testes unitários evolutivos." Master's thesis, Universidade de Évora, 2007. http://hdl.handle.net/10174/17982.
Vilela, Lucas Pimentel. "Hypothesis testing in econometric models." reponame:Repositório Institucional do FGV, 2015. http://hdl.handle.net/10438/18249.
Approved for entry into archive by Maria Almeida (maria.socorro@fgv.br) on 2017-05-15T19:31:43Z (GMT) No. of bitstreams: 1 Hypothesis Testing in Econometric Models - Vilela 2017.pdf: 2079231 bytes, checksum: d0387462f36ab4ab7e5d33163bb68416 (MD5)
Made available in DSpace on 2017-05-15T19:32:18Z (GMT). No. of bitstreams: 1 Hypothesis Testing in Econometric Models - Vilela 2017.pdf: 2079231 bytes, checksum: d0387462f36ab4ab7e5d33163bb68416 (MD5) Previous issue date: 2015-12-11
This thesis contains three chapters. The first chapter considers tests of the parameter of an endogenous variable in an instrumental variables regression model. The focus is on one-sided conditional t-tests. Theoretical and numerical work shows that the conditional 2SLS and Fuller t-tests perform well even when instruments are weakly correlated with the endogenous variable. When the population F-statistic is as small as two, the power is reasonably close to the power envelopes for similar and non-similar tests which are invariant to rotation transformations of the instruments. This finding is surprising considering the poor performance of two-sided conditional t-tests found in Andrews, Moreira, and Stock (2007). These tests have bad power because the conditional null distributions of t-statistics are asymmetric when instruments are weak. Taking this asymmetry into account, we propose two-sided tests based on t-statistics. These novel tests are approximately unbiased and can perform as well as the conditional likelihood ratio (CLR) test. The second and third chapters are interested in maxmin and minimax regret tests for broader hypothesis testing problems. In the second chapter, we present maxmin and minimax regret tests satisfying more general restrictions than the alpha-level and the power control over all alternative hypothesis constraints. More general restrictions enable us to eliminate trivial known tests and obtain tests with desirable properties, such as unbiasedness, local unbiasedness and similarity. In sequence, we prove that both tests always exist and under suficient assumptions, they are Bayes tests with priors that are solutions of an optimization problem, the dual problem. In the last part of the second chapter, we consider testing problems that are invariant to some group of transformations. Under the invariance of the hypothesis testing, the Hunt-Stein Theorem proves that the search for maxmin and minimax regret tests can be restricted to invariant tests. We prove that the Hunt-Stein Theorem still holds under the general constraints proposed. In the last chapter we develop a numerical method to implement maxmin and minimax regret tests proposed in the second chapter. The parametric space is discretized in order to obtain testing problems with a finite number of restrictions. We prove that, as the discretization turns finer, the maxmin and the minimax regret tests satisfying the finite number of restrictions have the same alternative power of the maxmin and minimax regret tests satisfying the general constraints. Hence, we can numerically implement tests for a finite number of restrictions as an approximation for the tests satisfying the general constraints. The results in the second and third chapters extend and complement the maxmin and minimax regret literature interested in characterizing and implementing both tests.
Esta tese contém três capítulos. O primeiro capítulo considera testes de hipóteses para o coeficiente de regressão da variável endógena em um modelo de variáveis instrumentais. O foco é em testes-t condicionais para hipóteses unilaterais. Trabalhos teóricos e numéricos mostram que os testes-t condicionais centrados nos estimadores de 2SLS e Fuller performam bem mesmo quando os instrumentos são fracamente correlacionados com a variável endógena. Quando a estatística F populacional é menor que dois, o poder é razoavelmente próximo do poder envoltório para testes que são invariantes a transformações que rotacionam os instrumentos (similares ou não similares). Este resultado é surpreendente considerando a baixa performance dos testes-t condicionais para hipóteses bilaterais apresentado em Andrews, Moreira, and Stock (2007). Estes testes possuem baixo poder porque as distribuições das estatísticas-t na hipótese nula são assimétricas quando os instrumentos são fracos. Explorando tal assimetria, nós propomos testes para hipóteses bilaterais baseados em estatísticas-t. Estes testes são aproximadamente não viesados e podem performar tão bem quanto o teste de razão de máxima verossimilhança condicional. No segundo e no terceiro capítulos, nosso interesse é em testes do tipo maxmin e minimax regret para testes de hipóteses mais gerais. No segundo capítulo, nós apresentamos testes maxmin e minimax regret que satisfazem restrições mais gerais que as restrições de tamanho e de controle sobre todo o poder na hipótese alternativa. Restrições mais gerais nos possibilitam eliminar testes triviais e obter testes com propriedades desejáveis, como por exemplo não viés, não viés local e similaridade. Na sequência, nós provamos que ambos os testes existem e, sob condições suficientes, eles são testes Bayesianos com priors que são solução de um problema de otimização, o problema dual. Na última parte do segundo capítulo, nós consideramos testes de hipóteses que são invariantes à algum grupo de transformações. Sob invariância, o Teorema de Hunt-Stein implica que a busca por testes maxmin e minimax regret pode ser restrita a testes invariantes. Nós provamos que o Teorema de Hunt-Stein continua válido sob as restrições gerais propostas. No último capítulo, nós desenvolvemos um procedimento numérico para implementar os testes maxmin e minimax regret propostos no segundo capítulo. O espaço paramétrico é discretizado com o objetivo de obter testes de hipóteses com um número finito de pontos. Nós provamos que, ao considerarmos partições mais finas, os testes maxmin e minimax regret que satisfazem um número finito de pontos possuem o mesmo poder na hipótese alternativa que os testes maxmin e minimax regret que satisfazem as restrições gerais. Portanto, nós podemos implementar numericamente os testes que satisfazem um número finito de pontos como aproximação aos testes que satisfazem as restrições gerais.
O'Mahony, Orla Ann. "Angiotensin II in male reproduction." Thesis, Queen Mary, University of London, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.368852.
Haltaufderheide, Kirsten [Verfasser]. "Darstellung von Hirnnerven im Bereich des Hirnstamms mit dem 3,0 Tesla MRT im Vergleich zum 1,5 Tesla MRT / Kirsten Haltaufderheide." Berlin : Medizinische Fakultät Charité - Universitätsmedizin Berlin, 2009. http://d-nb.info/1023497832/34.
Tek, Ferhat [Verfasser], and Ulrike [Akademischer Betreuer] Wedegärtner. "Vergleich von ΔR2* im Gehirn von Schaffeten währendHypoxie zwischen 1,5 Tesla und 3,0 Tesla MRT / Ferhat Tek. Betreuer: Ulrike Wedegärtner." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://d-nb.info/1111778299/34.
Tek, Ferhat Verfasser], and Ulrike [Akademischer Betreuer] [Wedegärtner. "Vergleich von ΔR2* im Gehirn von Schaffeten währendHypoxie zwischen 1,5 Tesla und 3,0 Tesla MRT / Ferhat Tek. Betreuer: Ulrike Wedegärtner." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2016. http://nbn-resolving.de/urn:nbn:de:gbv:18-80086.
Tao, Lian. "The blood-testis barrier and blood vessel permeability in rat testis." Title page, contents and abstract only, 1994. http://web4.library.adelaide.edu.au/theses/09PH/09pht1712.pdf.
Penna, Karen Elisa do Vale Nogueira. "Testes HEGY de raízes unitárias sazonais: efeitos de observações atípicas, erros de medida e quebras estruturais." Universidade de São Paulo, 2009. http://www.teses.usp.br/teses/disponiveis/45/45133/tde-22062009-132914/.
This current paper is a testing study for seasonality in time linear series. The text is the result of an extensive search covering several articles and books related to this subject. Initially, a test of unit roots corresponding to seasonal frequencies in quarterly data is presented. This test is called procedure HEGY and it allows the unit roots to be tested in some isolated seasonal frequencies, without assuming that the unit roots are present at all seasonal frequencies. Then, the extension of this test to monthly data is analyzed and a test that combines the most powerful procedure is presented quarterly and monthly. Atypical observations and errors of measurement are studied to evaluate the effects that they can cause on the behavior of the unit root tests and to present a test that includes the correction of this difference. Finally, we examined the asymptotic robustness procedure HEGY in the presence of structural breaks (finite magnitude of change in seasonal average) and a more powerful test that incorporates a structural break is introduced. In order to illustrate and complement the presented theoretical analysis, some applications in real time series are developed. The data were obtained from the Instituto Brasileiro de Geografia e Estatística (IBGE) and the R software was used for the analysis.
Kumar, Rajesh. "High power Tesla driven miniature plasma opening switch." Thesis, Loughborough University, 2009. https://dspace.lboro.ac.uk/2134/5478.
Krishnan, Vedavalli Gomatam. "Design and Fabrication of cm-scale Tesla Turbines." Thesis, University of California, Berkeley, 2015. http://pqdtopen.proquest.com/#viewpdf?dispub=3720613.
This dissertation discusses the design and scaling characteristics of Tesla – or so-called “friction” – turbines, and offers design solutions for achieving optimum performance given the input specifications. The research covers turbines ranging from sub-watt power scavenging designs to watt-range mobile applications to kilowatt-range renewable energy applications. The characteristics of the turbine are demonstrated using micro fabrication, theoretical analysis, and ANSYS, COMSOL, and MATLAB simulations. A MATLAB GUI is provided for generating design specifications and turbine performance sensitivity.
In Tesla turbines, the fluid profile and the length of the fluid path inside the rotor control the pressure drop and momentum transfer. In this research, analyses of rotor performance for incompressible flow are developed for different fluid profiles and fluid-path lengths. First, frictional losses in the nozzle and at the rotor-turbine interface are investigated, along with other turbine losses. These losses are then classified and modeled in terms of their relationship to head loss and shaft power loss, and investigated using MATLAB and COMSOL. As the turbine scales down, this scaled performance is evaluated and a constraint list for turbine hardware and operating parameters is derived. These results are used to optimize performance for the full range of millimeter to meter sized turbines.
Tesla turbines at the scales covered in this dissertation (mm – m) are relatively easy to manufacture. The experimental mini-turbines presented in this research have two primary components, fabricated using commercially available technologies: 1) four 1 cm-diameter rotors with variation in number of disks, interdisk spacing, and effective area, and 2) a turbine enclosure with eight nozzles of varying area, angle, and shape.
Test results from different configurations of nozzles and rotors are presented, and observations made on the performance trends of the turbine. Flow through the 1 cm rotors is also simulated in ANSYS to verify the momentum equations. The performance difference between analytical solutions, simulation, and experimental results is then studied, and a mapping of experimental results onto analytical results is proposed.
In addition, various scaling-down methodologies are investigated. Disk spacing is varied as a power function of radius, and turbine performance is analyzed across the turbine range of 1 mm to 400 mm diameter. Using this approach, constant power density designs are specified that perform at better than 35% mechanical efficiency for the entire range. As the turbine is scaled down, the roughening of the disks must be increased to control the fluid profile. Power density is very sensitive to the rotor spacing and the input head, and efficiency is very sensitive to the operating parameters and turbine design. This dissertation argues that these sensitivities explain the wide discrepancies in published turbine performances.
A practical design tool is also offered, which inputs user specifications on head, flow, particulate size, and medium to generate a list of possible turbine designs along with a recommendation for four candidate designs. The sensitivities of turbine performance to the input head and input flow variations are also reported. The tool is designed to cover 20 mW to 20 kW power range and 2 mm to 500 mm rotor radius range. Current applications and potential extensions to the research are discussed in the conclusion.
Quiroga, Persivale Guillermo. "El porqué en la innovación: el caso Tesla." PERU ECONOMICO S.A, 2016. http://hdl.handle.net/10757/624187.
Ortlieb, Chantal. "Angiographie par résonance magnétique A O. 1 tesla." Paris 11, 1993. http://www.theses.fr/1993PA11T029.
Van, de moortele Pierre-françois. "Irm fonctionnelle cérébrale à 3 Tesla : développements méthodologiques." Paris 11, 1999. http://www.theses.fr/1999PA11T018.
The aim of this work is to optimize functional studies of the human brain on a whole body 3 Tesla MRI scanner. A number of artifacts were to be fixed, mainly related to the Echo Planar Imaging sequence, which affords extremely fast acquisition rates, but is highly sensitive to strong artifacts (distortion, ghost image) and produces a high level of noise. These effects are even worsened at high magnetic field values. We proposed, validated and implemented sorne original methodological approaches to attenuate some artifacts and improve the quality of fMRI studies conducted in the laboratory. We have implemented a correction procedure for image distortions (from P. Jezzard) that we have validated on cerebral activation measurements. To suppress the ghost image, which is characteristic of Echo Planar Imaging, we modified a double sampling technique (from Yang), for continuous phase encoding Echo Planar Imaging, and we wrote a specifie algorithm needed for image reconstruction. To present auditory stimuli in the context of the high level of noise, we designed two modified Echo Planar sequences with the insertion of silent periods to present verbal material to the subject. One sequence is dedicated for blocked design experiments, the other for event-elated paradigms. The modified sequences were also validated in phantom studies. After having shown that sarnpling the brain slice by slice over time produced significant bias in images analysis, we have developed and implemented a correction algorithm to interpolate samples on the first slice acquisition time for each brain volume. Head motions are one of the main sources of unsuccessful fMRI studies. To measure the head position in the magnet, we demonstrate the feasibility of a method based on non proton fiducial markers, the position of which is measured by projections interleaved in the Echo Planat imaging scheme
Bäckman, Elias, and Mathilda Willén. "Tesla Valve for Hydrogen Decompression: Fluid Dynamic Analysis." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264524.
在过去的几年里,人类对温室效应的影响一直是社会舆论中一个突出和争论的主 题。对环境造成负面影响的因素有很多,汽车便是其中之一。如今,大多数汽车依靠 化石燃料驱动,在这个过程中会造成有毒物质的排放。因此,对可再生与环境友好的 替代燃料的研究重要性愈发突出。氢,(更具体地说,氢气),由于燃烧产物只有 水,成为了一种可选的替代燃料。 在氢燃料汽车的储氢罐中,往往设置高压以提高氢气储量并增加里程数。而为了 保证燃料电池高效运行,在储氢罐和燃料电池之间必须采取减压手段,这也使高效降 压成为了氢燃料汽车研究领域中的一个长期需求。特斯拉阀在没有活动部件的情况 下,允许流体沿一个方向流动,并限制其往相反方向流动。该概念在工业环境中具备 广泛的应用潜力,而理解特斯拉阀(的工作机理)对于表征设备性能非常重要。采用 最优几何形状的特斯拉阀,可以实现高压降,换言之高性能。 本研究对特斯拉阀的三种结构参数进行了调查,得出了使特斯拉阀降压性能达到 最优时的参数值。所研究的三种参数分别是内部曲线半径,多级特斯拉阀中的阀间距 以及阀门的横截面。为了获得结果,使用计算流体动力学软件 ANSYS Fluent 进行了数 值模拟。结果表明,与较大的半径相比,较小的内部曲线半径产生更高的压降。随着 多级特斯拉阀的阀间距增大,阀门降压性能提高。对横截面的研究中,比较了矩形截 面和圆形截面的特斯拉阀的降压性能,发现圆形截面的特斯拉阀降压性能更优。本研 究的最终结论是(在特斯拉阀设计中采用)圆形横截面,小的内部曲线半径和大的阀 间距可以提高装置性能。
The last couple of years, the footprint of humankind on the greenhouse effect has been a highlighted and debated topic. There are many contributing factors to the negative impacts on the environment, one of them being the sector of automobile. Today, most cars are driven on fossil fuel energy which produces toxic emissions. The search for replaceable alternative fuels is hence of importance and keys of demands are renewable energy and energy-friendly resources. Hydrogen as a fuel, in particular the hydrogen gas, is one of the options considering the only residues to be water and hot air, provided that the energy used in the hydrogen production comes from renewable sources. In the storage tank of cars fueled by hydrogen gas, a high pressure is set due to its advantages of opportunities of more storage and thus increased mileage of the tank. A decompression process is necessary to supply the fuel cell with hydrogen gas at the right pressure, and thus achieve highest possible degree of efficiency. The concept offers a wide set of application opportunities in industrial situations and understanding the valve is important for characterizing the performance on the device. Given correct and optimal geometry on the Tesla valve, a high pressure-drop could be achieved, in other words a high performance. In this study three geometric parameters were investigated in order to conclude their ideal value for optimizing the performance. The parameters of interest were the inner curve radius, the valveto-valve distance in a multi-stage Tesla valve and the cross-section of the valve. In order to obtain the results, a numerical study was conducted using simulations in a Computational Fluid Dynamics program, ANSYS Fluent. The results denoted that a small inner curve radius yielded the highest pressure-drop when comparing to larger radius’. The performance was enhanced with a large valveto-valve distance of the multi-stage Tesla valves and the findings of the cross-sections, which were chosen to be rectangular and circular of interest, displayed a superior performance for the circular cross-sections. Conclusions were drawn that circular cross-section is to prefer and that a small inner curve radius and large valve-to-valve distance yield an enhanced performance of the device.
Wang, Meng. "A Tesla-Blumlein PFL-Bipolar pulsed power generator." Thesis, Loughborough University, 2016. https://dspace.lboro.ac.uk/2134/22802.
Quevedo, Henrique Müller de. "Determination of normative values for mechanical quantitative sensory tests in the orofacial regionDeterminação de valores normativos para testes quantitativos sensoriais mecânicos na região orofacial." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/25/25146/tde-13092016-102731/.
Um novo conceito de tratamento de síndromes dolorosas baseada em mecanismos de dor é baseado na hipótese de que diferentes sinais clínicos refletem alterações em diversos mecanismos de geração de dor. Para analisar estes mecanismos, em 2006, o DFNS (German Research Network on Neuropathic Pain) criou um protocolo padronizado de testes quantitativos sensoriais (QST) para uma avaliação quantitativa de mecanismos de geração de dor, criando valores de referência para mão, pé e face (músculo masseter). No entanto, ainda há falta de valores de referência para alguns testes quantitativos em diversas importantes regiões orofaciais como o músculo temporal anterior e a mucosa oral. Este estudo buscou determinar valores normativos dos QSTs nessas regiões e avaliou a eficácia de um estímulo condicionante (CPM) na percepção da dor por meio de dois estímulos teste (PPT e MPT). 60 sujeitos saudáveis (30 homens/30 mulheres) foram examinados com os testes de sensibilidade tátil (MDT), limiar de dor mecânico (MPT), somação temporal (WUR), limiar de dor à pressão (PPT) e condicionamento modulatório da dor (CPM), afim de determinar valores normativos na população. Os pacientes foram examinados em sessão única por um único examinador treinado sob o protocolo desenvolvido pelo DFNS. Para avaliação estatística dos dados da CPM uma análise de variância (ANOVA) foi utilizada comparando os fatores sítio (2 níveis), tempo (2 níveis) e sexo (2 níveis) entre os dois estímulos teste (MPT e PPT). Os valores de referência para QST foram comparados por uma ANOVA multi-vias considerando os fatores sítio (3 níveis), lado (2 níveis), e sexo (2 níveis) (α=5%). MDT e MPT mostraram efeitos principais de sítio (p<0,001), em que a mucosa apresentou os maiores limiares para MDT e menos limiares para MPT, quando comparada à mão e temporal anterior. PPT demonstrou efeitos principais de sítio e sexo. Limiares de dor à pressão do músculo temporal foram menores comparados com a mão (p<0,001) e homens apresentaram maiores limiares que as mulheres em todos os sítios. O teste WUR não apresentou nenhum efeito de sexo, sítio ou lado examinado. Os dois estímulos teste da CPM (MPT e PPT) foram capazes de produzir maiores limiares quando comparados aos estímulos não condicionados (p<0,001). Um maior número significativo de sujeitos respondeu positivamente a estimulação CPM no músculo temporal (p=0,002) para ambos estímulos teste. O estudo concluiu que o perfil sensorial avaliados por meio de QSTs pode ser influenciado pela região de exame e sexo. O efeito da CPM foi igualmente positivo para ambos estímulos teste. No entanto, seu grau de resposta depende da região avaliada.
Todesco, Jose Leomar. "Reconhecimento de padrões usando rede neuronal artificial com uma função de base radial : uma aplicação na classificação de cromossomos humanos." reponame:Repositório Institucional da UFSC, 1995. http://repositorio.ufsc.br/xmlui/handle/123456789/76181.
Made available in DSpace on 2012-10-16T08:02:43Z (GMT). No. of bitstreams: 0Bitstream added on 2013-07-16T17:23:59Z : No. of bitstreams: 1 102917.pdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5)
Santos, Neto Almir Barros da Silva. "Cisalhamento em corpos-de-prova de madeira /." Florianópolis, SC, 1999. http://repositorio.ufsc.br/xmlui/handle/123456789/80834.
Made available in DSpace on 2012-10-18T19:48:41Z (GMT). No. of bitstreams: 0Bitstream added on 2016-01-09T02:04:16Z : No. of bitstreams: 1 143981.pdf: 14632489 bytes, checksum: 32a15a6b5755c5ba7b1896856f2d01dc (MD5)
de, Souza Alves Gustavo. "Modelo de maturidade em testes com foco em ambientes de testes heterogêneos." Universidade Federal de Pernambuco, 2007. https://repositorio.ufpe.br/handle/123456789/2711.
No passado as grandes empresas confiavam a qualidade dos seus sistemas aos seus fornecedores (sejam internos ou externos). Novas tecnologias estão surgindo, processos de desenvolvimento estão mais maduros, mas os fornecedores ainda pecam na qualidade do produto. Falhas no desenvolvimento dos sistemas, cronogramas estourados e defeitos em produção são os principais problemas que prejudicam todo o planejamento financeiro e estratégico de uma organização [TER_01]. Boas práticas em testes de software contribuem para a melhoria da qualidade e redução dos custos dos produtos finais, pela diminuição de retrabalho nos estágios posteriores de testes, durante a implantação e na manutenção. Modelos de maturidade para o desenvolvimento de software, como CMMi vêm sendo utilizados em larga escala para amenizar estes problemas, entretanto esses modelos não tratam com grande atenção as atividades relacionadas a testes. Em resposta a esta deficiência foram criados modelos de maturidade para os processos de testes. Entre eles, o TMM, Testing Maturity Model [TMM_01], o TIM, Test Improvement Model [TIM_01] e o TPI, Test Process Improvement [TPI_01]. Um novo modelo de maturidade em teste, fruto deste trabalho tem como objetivo cobrir as ausências dos modelos citados. A principal delas é falta de detalhes sobre ambientes de teste. O TMM-e (enviroment) como será chamado é adequado para empresas de grande porte onde encontramos uma variedade de plataformas, linguagens de programação e dispositivos todos funcionando de forma integrada. O mesmo servirá de referência para estas empresas implantarem um processo de testes de qualidade, além de fornecer segurança e qualidade na definição e montagem de seus ambientes de testes