Relevant bibliographies by topics / Test Erichsen

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Test Erichsen'

Author: Grafiati
Published: 25 May 2024
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Test Erichsen.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Test Erichsen"

1

Şener, Bora, and E. S. Kayali. "Effectiveness of Stamping Lubricants in Erichsen Test." Key Engineering Materials 549 (April 2013): 325–32. http://dx.doi.org/10.4028/www.scientific.net/kem.549.325.

Full text
Abstract:
In the present work, formability of ultra low carbon steel sheets (uncoated interstitial free and galvanized steel sheet) has been characterized and the effectiveness of dry and liquid lubricants on formability of these steel sheets was evaluated by using the standard Erichsen test. Primarily, some important mechanical properties of materials like strain hardening coefficient (n), normal anisotropy (r) were determined using the tensile test and formability of these steel sheets has been correlated with these mechanical properties. Then these steel sheets were subjected to the Erichsen test usi
APA, Harvard, Vancouver, ISO, and other styles
2

Giuliano, Gillo, and F. Samani. "Effect of Lubrication on the Erichsen Test." Applied Mechanics and Materials 365-366 (August 2013): 425–28. http://dx.doi.org/10.4028/www.scientific.net/amm.365-366.425.

Full text
Abstract:
This study analyzes experimentally the influence of the friction between the sheet metal and the die surfaces on the results of the Erichsen test in terms of load-displacement curve of the punch, the normalized thickness measured at the specimen apex and the distance measured between the thinnest area of the specimen and the lateral surface of the blankholder. Two types of aluminium alloys, AA 2017 Al-Cu alloy (Al-4.5%Cu-1.0%Mn-1.0%Mg) and AA 5083 Al-Mg alloy (Al-4.5%Mg-1.0%Mn-0.15%Cr), with thickness of 1.0 mm are selected as the experimental materials for Erichsen test.
APA, Harvard, Vancouver, ISO, and other styles
3

Uriya, Yu, and Jun Yanagimoto. "Erichsen cupping test on thermosetting CFRP sheets." International Journal of Material Forming 10, no. 4 (2016): 527–34. http://dx.doi.org/10.1007/s12289-016-1298-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Giuliano, Gillo. "Evaluation of the Coulomb Friction Coefficient by the Erichsen Test." Applied Mechanics and Materials 365-366 (August 2013): 1190–93. http://dx.doi.org/10.4028/www.scientific.net/amm.365-366.1190.

Full text
Abstract:
In this study, the Erichsen test is used to identify the friction coefficient of the Coulomb friction model coupling experimental tests results with numerical ones. The evaluation of the Coulomb friction coefficient is based on the distance measured between the thinnest area of the specimen and the lateral surface of the blankholder. Two types of aluminium alloys, AA 2017 Al-Cu alloy and AA 5083 Al-Mg alloy, with thickness of 1.0 mm are selected as the experimental materials for Erichsen test. Specimens are tested in unlubricated condition as well as using two different lubricants, namely Grea
APA, Harvard, Vancouver, ISO, and other styles
5

Gillo, Giuliano. "Influence of the Metal Sheet Parameters on the Results of the Erichsen Test." Applied Mechanics and Materials 217-219 (November 2012): 2444–47. http://dx.doi.org/10.4028/www.scientific.net/amm.217-219.2444.

Full text
Abstract:
Considering an isotropic rheological law of the sheet material and the power law relationship between the stress and the plastic strain, the present paper by using the finite element method analyzes the influence of the material parameters on the results of the Erichsen test in terms of force-displacement curve of the punch and the normalized thickness measured at the specimen apex also varying the coefficient of the Coulomb friction law. Moreover for an AA5083 aluminum alloy the results of the numerical simulation of the Erichsen test will be compared to those obtained experimentally.
APA, Harvard, Vancouver, ISO, and other styles
6

Reddy, M. Rama Narasimha, M. Saran Theja, and M. Gangadhar Tilak. "Modified Erichsen Cupping Test for Copper, Brass, Aluminium and Stainless Steel." SIJ Transactions on Industrial, Financial & Business Management 06, no. 02 (2018): 01–06. http://dx.doi.org/10.9756/sijifbm/v6i2/0102550102.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kumar, S. Ramesh, S. Senthil Kumaran, M. Sree Arravind, and D. Venkateswarlu. "Effect of Microstructure and Mechanical Properties of Austenitic Stainless Steel 1.6mm Butt Welded by Plasma Arc Welding." Materials Science Forum 969 (August 2019): 619–24. http://dx.doi.org/10.4028/www.scientific.net/msf.969.619.

Full text
Abstract:
Plasma Arc Welding (PAW) is more tolerant to joint misalignment than Laser Beam Welding (LBW) at a lower cost [1]. The present study deals with the assessment of mechanical and metallurgical properties of butt welded 1.6 mm thick austenitic stainless steel similar (SS304 and SS304) by using plasma arc welding technique. Similar butt-Welded joints were analyzed by using mechanical (Bend test, Erichsen cup test, tensile test) and metallurgical (Optical macroscopic and microscopic images) characterization methods. The bead width and depth of the butt welded 1.6mm thick butt joined SS304 was analy
APA, Harvard, Vancouver, ISO, and other styles
8

Nasri, Mohamed Toumi, Slimani Faouzi, A. Ayadi, Abel Cherouat, Mohamed Ali Rezgui, and Ali Zghal. "Inverse Identification Method to Characterize the Behavior of Coupled Elasto-Plastic Coupled to Damage Model Using Modified Erichsen Test." Advanced Materials Research 698 (May 2013): 21–28. http://dx.doi.org/10.4028/www.scientific.net/amr.698.21.

Full text
Abstract:
This study presents experimental and numerical approaches to study the thermo-elasto-plastic behavior coupled to ductile damage of thin sheet. The study highlights the influence of temperature on the mechanical properties affecting the ability of forming aluminum sheet 1050A. The properties of the Swifts model hardening coupled to isotropic ductile damage variable and the Erichsen Index are obtained using inverse approach (Nelder-Mead method). The obtained results have established a correlation between the Index Erichsen formability of the material.
APA, Harvard, Vancouver, ISO, and other styles
9

Zhang, Run Qi, Yi Qin Cai, Hao Xu Wang, Zhuang Li, and Qi Zhou. "Effects of Rolling Reduction on Cold Forming Properties of Commercially Pure Titanium Sheet." Materials Science Forum 960 (June 2019): 9–13. http://dx.doi.org/10.4028/www.scientific.net/msf.960.9.

Full text
Abstract:
Different cold rolling reductions were adopted for commercially pure titanium sheet. Cold forming properties were investigated by a microstructural analysis, Vickers microhardness and erichsen value measurements. The results have shown that Cold rolling resulted in refined alpha grains. Alpha grain size was refined further by greater cold reduction. Alpha grain sizes of the specimens of processing 1, 2 and 3 reached 30.90 μm, 26.48 μm and 20.58 μm, respectively. Cold forming properties were affected by different alpha grain sizes. The hardness and erichsen value reached the lowest and the high
APA, Harvard, Vancouver, ISO, and other styles
10

Mansouri, L. Z., J. Coër, S. Thuillier, H. Laurent, and P. Y. Manach. "Investigation of Portevin-Le Châtelier effect during Erichsen test." International Journal of Material Forming 13, no. 5 (2019): 687–97. http://dx.doi.org/10.1007/s12289-019-01511-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Test Erichsen"

1

Císařová, Michaela. "Vliv morfologie povlaku Zn na mezní podmínky při tažení tenkých plechů." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-234011.

Full text
Abstract:
The doctor thesis deals about the influence of zinc coating morphology on limit conditions formability of a thin sheet metal. In the introduction of the thesis is discusesed about current problems searching the most suitable morphology of the steel sheet metals, a method of appliing to the zinc sheet metal. The hot dip zinc coating is discussed in next chapter, the topical knowledges about the influence of the individual factors have some effect to coat calibre and quality. In literary researchs are discussed the concrete technological tests of zinc coating to harder sheet metal forming, the t
APA, Harvard, Vancouver, ISO, and other styles
2

Arvieu, Marie-Florence. "Compréhension des mécanismes de délamination dans le feuil peinture automobile." Compiègne, 2011. http://www.theses.fr/2011COMP1950.

Full text
Abstract:
Le feuil peinture automobile est un système multicouches protégeant la carrosserie des agressions extérieures et participant à l’esthétisme du véhicule. C’est pourquoi, afin d’assurer la qualité de l’adhésion interfaciale entre les différentes couches, le feuil peinture est testé, notamment lors de variations des conditions d’application et de modifications des formulations. Ainsi, dans une politique industrielle de contrôle qualité du feuil peinture et de contrôle des risques, l’objectif de ce travail est de comprendre les mécanismes de délamination. Dans un premier temps, l��influence du tau
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Test Erichsen"

1

Institution, British Standards. Metallic materials - sheet and strip - Erichsen cupping test =: Matériaux métalliques - tôles et bandes - essai d'emboutissage Erichsen. BSI, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Test Erichsen"

1

Singh, Jaiveer, Min-Seong Kim, and Shi-Hoon Choi. "The Effect of Initial Texture on Deformation Behaviors of Mg Alloys Under Erichsen Test." In Magnesium Technology 2018. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72332-7_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Test Erichsen"

1

Salazar, Julio Alberto Boix, Dirk F. de Lange, and Hugo I. Medellín Castillo. "Elastoplastic Analysis of the Erichsen Cupping Test Using Comsol Multiphysics FEM Code." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-39018.

Full text
Abstract:
One of the standard procedures to test the formability of sheet material is the Erichsen cupping test, in which the metal sheet blank is held in its place over a circular space and depressed by a semi-spherical punch. The depth of depression that can be reached is the measure of the formability. In this work the elastoplastic deformation of the sheet is analyzed by multipurpose Finite Element Method software Comsol Multiphysics. The Comsol package is not specifically developed or focused on the analysis of solid mechanical problems with elastoplastic model behavior and contact problems, and st
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Wuyang, and Takashi Iizuka. "Trials to evaluate bulging formability of duplex embossed A1050-O sheet using erichsen test." In PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5112711.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Petrov, M. A., D. A. Romashov, and V. V. Isakov. "Application of Contactless Methods for Deformation Assessment During Erichsen Cupping Test of Aluminium Sheet Samples." In 33rd International Conference on Computer Graphics and Vision. Keldysh Institute of Applied Mathematics, 2023. http://dx.doi.org/10.20948/graphicon-2023-274-284.

Full text
Abstract:
In the present study, non-contact techniques for estimating the deformation of a sheet specimen of aluminium alloy AA5051 (AMg2) subjected to Erichsen cupping test are considered. It is shown that it is possible to get reliable information by numerical simulation, however, for the case when the coefficients of the yield and fracture equations of the material are well-known and validated. This requires the application of confirmatory techniques based on the results of real experiments, for example, through optical 3D-scanning. The realization of the techniques requires the observance of the pec
APA, Harvard, Vancouver, ISO, and other styles
4

Anand, Amit, and Rakesh Lingam. "The Effect of Electric Pulse and Strain Rate on the Formability of Aluminium 6061: An Experimental Investigation." In ASME 2024 19th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/msec2024-125427.

Full text
Abstract:
Abstract The electrically assisted forming of sheet metal holds a promising avenue in improving formability and green manufacturing. Manufacturers aim to enhance formability and reduce the load required for forming with fewer defects. In most sheet metal forming operations, a biaxial state of stress exists. In addition, it is challenging to align the current flow direction with the loading direction because of the complexity of processes. So, uniaxial testing with electric current is insufficient for the complete mechanical characterization of sheet metal. The current work aims to understand t
APA, Harvard, Vancouver, ISO, and other styles
5

JIN, Jianchen. "Correlation between sheet formability and joint strength of A1050-O/SPCC butt laser welded tailored blanks." In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-149.

Full text
Abstract:
Abstract. Laser-welded tailored blanks are useful for lightweight automobiles. However, three major problems remain unresolved: low joint strength, low formability, and galvanic corrosion. Although considerable research has been conducted on the lap form, the studies on the use of lasers to weld dissimilar metals in the butt form are scarce. For practical applications of dissimilar metal tailored blanks, formability must also be investigated. In this study, Japan Industrial Standard A1050-O aluminum and SPCC steel were welded as dissimilar metal tailored blanks and used for Erichsen, flat punc
APA, Harvard, Vancouver, ISO, and other styles
6

Mao, Bo, Xing Zhang, Yiliang Liao, and Bin Li. "Improving Room Temperature-Stretch Formability of Magnesium Alloys by Laser Shock Peening." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2910.

Full text
Abstract:
Abstract The applications of magnesium (Mg) and their alloys are often restricted by their poor formability at room temperature. Several strategies have been developed in recent years to enhance the formability of Mg alloys, such as grain refinement and texture weakening, either by alloying or processing. Laser shock peening (LSP) is an advanced laser-based surface processing method which has been utilized improve the surface hardness, fatigue performance, and corrosion resistance of Mg alloys. Recent studies show that LSP can bring significant texture weakening and grain refinement effect in
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Test Erichsen' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography