Log in

Relevant bibliographies by topics / Test mode / Journal articles

To see the other types of publications on this topic, follow the link: Test mode.

Journal articles on the topic 'Test mode'

Author: Grafiati

Published: 5 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Test mode.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

MacGillivray, Helen, and Paul Hewson. "Countering default mode in Teaching Statistics." Teaching Statistics 39, no. 1 (2017): 36–38. http://dx.doi.org/10.1111/test.12122.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Dalmat, Yann-Mickael. "Test antigénique, mode d’emploi." Option/Bio 32, no. 627-628 (2021): 6–7. http://dx.doi.org/10.1016/s0992-5945(21)00008-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

He, Ting Yin, Fu Rong Yan, and Qing Bo Li. "Model Test on Disruptive Mode of Sandy Soil." Applied Mechanics and Materials 330 (June 2013): 1100–1103. http://dx.doi.org/10.4028/www.scientific.net/amm.330.1100.

Full text

Abstract:

Based on similarity theory, the paper has studied the strip foundation the disruptive mode and the load bearing mechanism. One model test has been designed to simulate the sandy soil foundation entire process begin to deform until to destruct. The diversity place earth pressure and the distribution rule have been analyzed, and shear belt formation and the developing process has been observed. The results show that the model test could reflect the ground deformation to destruction entire process, the subsidence distortion characteristic, the foundation stress distribution, the destruction shape

APA, Harvard, Vancouver, ISO, and other styles

4

Sun, Z., X. L. Wang, L. B. Hu, L. Xu, and X. Shi. "Dynamic simulation of DALS test facility cryoplant." IOP Conference Series: Materials Science and Engineering 1301, no. 1 (2024): 012087. http://dx.doi.org/10.1088/1757-899x/1301/1/012087.

Full text

Abstract:

Abstract Dalian Advanced Light Source (DALS) test facility program requires a 370 W cryoplant to meet the cooling requirements of four testbenches. The utilization of dynamic simulation holds significant potential for diverse applications such as process design, control logic optimization, and virtual commissioning. These applications are helpful in facilitating the subsequent stages of commissioning and operation. This paper describes the establishment of a model for the DALS test facility cryoplant based on the Ecosimpro software. The model includes the main components of the cryoplant, inco

APA, Harvard, Vancouver, ISO, and other styles

5

KIKUCHI, Masanori, and Tomonori SATAKE. "Fatigue test under mode II+III mixed-mode condition." Proceedings of the JSME annual meeting 2000.3 (2000): 81–82. http://dx.doi.org/10.1299/jsmemecjo.2000.3.0_81.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kazekami, Y., H. Sawada, T. Ishizu, and K. Betaharon. "Test results for on-board burst-mode CQPSK modem." International Journal of Satellite Communications 5, no. 2 (1987): 163–70. http://dx.doi.org/10.1002/sat.4600050214.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Lee, Jo Ann, Kathleen E. Moreno, and J. B. Sympson. "The Effects of Mode of Test Administration on Test Performance." Educational and Psychological Measurement 46, no. 2 (1986): 467–74. http://dx.doi.org/10.1177/001316448604600224.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Bhoola-Patel, Anisha, and Sumaya Laher. "The Influence of Mode of Test Administration on Test Performance." Journal of Psychology in Africa 21, no. 1 (2011): 139–44. http://dx.doi.org/10.1080/14330237.2011.10820440.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kammer, D. C. "A Hybrid Approach to Test-Analysis-Model Development for Large Space Structures." Journal of Vibration and Acoustics 113, no. 3 (1991): 325–32. http://dx.doi.org/10.1115/1.2930188.

Full text

Abstract:

A new finite element model (FEM) reduction method is presented for use in the generation of Test-Analysis-Models (TAM) in test-analysis correlation. The method addresses the concern that some current TAM methodologies, specifically the Modal TAM, are overly sensitive to differences between test mode shapes and analysis mode shapes. This sensitivity can result in large off-diagonal terms within the orthogonality and cross-orthogonality matrices used for test-analysis mode shape correlation. It has been hypothesized that the sensitivity is due to the Modal TAM’s poor representation of residual m

APA, Harvard, Vancouver, ISO, and other styles

10

Kwon, Suh Keong. "Factors Associated with Test-takers’ Listening Performance in a Video Listening Comprehension Test: Examining Item and Test-taker Characteristics." Korea English Language Testing Association 17, no. 2 (2022): 101–20. http://dx.doi.org/10.37244/ela.2022.17.2.101.

Full text

Abstract:

This study examines the degree to which item and test-taker characteristics have an effect on the test-taker’s listening performance in a video-based listening test. A total of 114 participants were allocated into two separate groups, and an identical listening test consisting of retired items of the CSAT English was developed in two different modes (audio-only and video) and was given to each group. The test performance of the two groups was compared by prompt type (dialogue and lecture) and proficiency (low-mid-high). Findings showed that test-takers in all three proficiency groups performed

APA, Harvard, Vancouver, ISO, and other styles

11

Shaing, K. C. "Test of tokamak low‐mode–high‐mode transition theory in stellarators." Physics of Fluids B: Plasma Physics 5, no. 11 (1993): 3841–43. http://dx.doi.org/10.1063/1.860605.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Li, Jianping, Di Shen, Qiang Fu, Yanhua Wang, and Wenyan Song. "Mode transition of fuel control test in a dual-mode combustor." Applied Thermal Engineering 111 (January 2017): 1312–19. http://dx.doi.org/10.1016/j.applthermaleng.2016.09.173.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Zhang, Xin Min, Yu Yan Zhao, Jie Yu Tao, and Yan Wang. "Modeling and Numerical Solution of Four-Quadrant Pump Characteristics Test Data." Advanced Materials Research 718-720 (July 2013): 1820–24. http://dx.doi.org/10.4028/www.scientific.net/amr.718-720.1820.

Full text

Abstract:

In some cases, combined use of a few centrifugal pumps can be seen frequently. In some working conditions, some of them may work under abnormal mode (take turbine mode for example). So it is needed to know the characteristics of pumps under the modes. One way to obtain the characteristics is test. In this paper, a nonlinear mathematical model is presented to describe the characteristics. The solution to the model is performed by a specialized particle swarm algorithm. A numerical example shows good agreement between model curves and pump test data.

APA, Harvard, Vancouver, ISO, and other styles

14

Seo, Joon-Ho, Jin-Young Ko, and Han-Joon Park. "Built-In-Test Coverage Analysis Considering Failure Mode of Electronics Components." Journal of the Korean Society for Aeronautical & Space Sciences 43, no. 5 (2015): 449–55. http://dx.doi.org/10.5139/jksas.2015.43.5.449.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Wu, Bin, Yun He, and Song Feng. "Extracting Modal Parameters of Constrained Structure from Free Test Data." Applied Mechanics and Materials 110-116 (October 2011): 4198–203. http://dx.doi.org/10.4028/www.scientific.net/amm.110-116.4198.

Full text

Abstract:

This study explores the method of extracting modal parameters of constrained structure from test data. The normal mode spectrum matrix constituted of low order frequencies of the structure can be derived from the free test data, while the normal mode shapes and the extra high order modes can be obtained through FEM analysis; The boundary constrains are equivalent as a kind of sub-structure, and the modal synthesis is used to extract the constrained modal parameters. Experiment and simulation are conducted and the results show that the extraction method based on the modal synthesis and which co

APA, Harvard, Vancouver, ISO, and other styles

16

Li, Shiyang, and Min Huang. "Vibration test method of nonlinear normal mode." Vibroengineering PROCEDIA 19 (September 24, 2018): 116–22. http://dx.doi.org/10.21595/vp.2018.20135.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Kabe, Alvar M. "Efficient direct measurement mode survey test procedure." AIAA Journal 26, no. 8 (1988): 1003–10. http://dx.doi.org/10.2514/3.10003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

KIKUCHI, Masanori, and Motofumi KURODA. "Mixed-Mode Fracture Test of CFRP Laminates." Transactions of the Japan Society of Mechanical Engineers Series A 57, no. 542 (1991): 2378–83. http://dx.doi.org/10.1299/kikaia.57.2378.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

FUNAMOTO, Kenichi, and Masayoshi MISAWA. "Component Mode Synthesis Using Component Test Results." Proceedings of the JSME annual meeting 2002.1 (2002): 297–98. http://dx.doi.org/10.1299/jsmemecjo.2002.1.0_297.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Hong, Daewoong, Young-Man Choi, and Jaehwa Jeong. "Test bed for contact-mode triboelectric nanogenerator." Review of Scientific Instruments 89, no. 6 (2018): 065110. http://dx.doi.org/10.1063/1.5027764.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

KIKUCHI, Masanori, and Motofumi KURODA. "Mixed-Mode Fracture Test of CFRP Laminates." JSME international journal. Ser. 1, Solid mechanics, strength of materials 35, no. 4 (1992): 496–501. http://dx.doi.org/10.1299/jsmea1988.35.4_496.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

CHEN, Ping, Yi DAI, and Yingshi HUANG. "Test mode effect: Sources, detection, and applications." Advances in Psychological Science 31, no. 10 (2023): 1966. http://dx.doi.org/10.3724/sp.j.1042.2023.01966.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Haitao, Luo, Wang Peng, Wu Tingke, and Wang Haonan. "DYNAMIC SIMULATION AND TEST ANALYSIS OF SPACE TRUSS AND LOAD STRUCTURE." International Journal of Engineering Technologies and Management Research 5, no. 3 (2018): 123–33. https://doi.org/10.5281/zenodo.1216829.

Full text

Abstract:

<strong><em>The dynamic characteristics of aerospace products play a decisive role in environmental adaptability of products, because aerospace products are subjected to vibration environment during launching process.  This paper describes the design of a space truss and the load structure, in order to get the dynamic characteristics, finite element modal analysis and modal test is done on the structural model, through correlation analysis to determine the degree of conformity of the finite element model with the experimental model. It is determined that the finite element mode of truss a

APA, Harvard, Vancouver, ISO, and other styles

24

Niu, Haoshuang, Xiaolin Weng, Chao Tian, and Deng Wang. "Model Test and Back Analysis of Shield Tunnel Load Distribution in Soft Clay." Advances in Materials Science and Engineering 2021 (May 26, 2021): 1–15. http://dx.doi.org/10.1155/2021/9992348.

Full text

Abstract:

Combined with the soft clay layer of Foshan metro, a back-analysis method combining model test and numerical simulation is developed. First, the similitude criterion for the model used in this study was derived from similarity theory and elasticity mechanics equations. Artificial clay is prepared by mixing kaolin, bentonite, loess, and river sand in proportions of 4 : 2: 3 : 1. Gypsum, water, and borax are mixed in proportions of 1 : 0.7 : 0.015 to simulate the tunnel lining. The model tests were carried out based on four load modes: the combination of mode 1, vertical load distribution and ho

APA, Harvard, Vancouver, ISO, and other styles

25

Shamir, Ofer, Itamar Yacoby, Shlomi Ziskin Ziv, and Nathan Paldor. "The Matsuno baroclinic wave test case." Geoscientific Model Development 12, no. 6 (2019): 2181–93. http://dx.doi.org/10.5194/gmd-12-2181-2019.

Full text

Abstract:

Abstract. The analytic wave solutions obtained by Matsuno (1966) in his seminal work on equatorial waves provide a simple and informative way of assessing the performance of atmospheric models by measuring the accuracy with which they simulate these waves. These solutions approximate the solutions of the shallow-water equations on the sphere for low gravity-wave speeds such as those of the baroclinic modes in the atmosphere. This is in contrast to the solutions of the non-divergent barotropic vorticity equation, used in the Rossby–Haurwitz test case, which are only accurate for high gravity-wa

APA, Harvard, Vancouver, ISO, and other styles

26

Wang, Shixiong, Yilin Zhang, and Jianjia Yi. "Design and Test of Embedded Reconfigurable Mode Converter Based on Spontaneous Deformable Materials." Materials 16, no. 19 (2023): 6420. http://dx.doi.org/10.3390/ma16196420.

Full text

Abstract:

The mode converter, as a passive mode conversion device in transmission lines, is well-investigated and widely implemented in various electromagnetic systems. However, most traditional mode converters can only realize a single conversion mode. Thus, a mode converter achieving multiple controllable output modes is urgently needed. In this paper, a reconfigurable mode converter operating in the microwave range is achieved by embedding a deformable all-dielectric material with quadrilateral shape into a rectangular waveguide based on coupled-mode theory. It can achieve different target modes with

APA, Harvard, Vancouver, ISO, and other styles

27

Chen, Chao, Jiyang Zhang, Daibing Zhang, and Lincheng Shen. "Control and flight test of a tilt-rotor unmanned aerial vehicle." International Journal of Advanced Robotic Systems 14, no. 1 (2017): 172988141667814. http://dx.doi.org/10.1177/1729881416678141.

Full text

Abstract:

Tilt-rotor unmanned aerial vehicles have attracted increasing attention due to their ability to perform vertical take-off and landing and their high-speed cruising abilities, thereby presenting broad application prospects. Considering portability and applications in tasks characterized by constrained or small scope areas, this article presents a compact tricopter configuration tilt-rotor unmanned aerial vehicle with full modes of flight from the rotor mode to the fixed-wing mode and vice versa. The unique multiple modes make the tilt-rotor unmanned aerial vehicle a multi-input multi-output, no

APA, Harvard, Vancouver, ISO, and other styles

28

Zheng, Wang, Wei Dong Xing, A. Na Wang, and Li Xin. "Fatigue Reliability Analysis of Turbine of Turbocharger Based on the Endurance Test Profile of Engine." Applied Mechanics and Materials 215-216 (November 2012): 750–53. http://dx.doi.org/10.4028/www.scientific.net/amm.215-216.750.

Full text

Abstract:

For the fatigue failure mode of turbine of turbocharger for vehicle application, the method for fatigue reliability analysis and fatigue life prediction of turbine is studied based on the endurance test profile of engine. Firstly, the critical location of turbocharger turbine with fatigue failure mode is determined. Then, the fatigue stress process of turbine is calculated according to the main operating modes consisted of the endurance test profile of engine. The fatigue strength of critical location of turbine with fatigue failure mode is studied through the fatigue test of imitation specime

APA, Harvard, Vancouver, ISO, and other styles

29

Chen, Le Yi. "Model Test Research of Surcharge Contribution to Ground Bearing Capacity." Applied Mechanics and Materials 353-356 (August 2013): 815–18. http://dx.doi.org/10.4028/www.scientific.net/amm.353-356.815.

Full text

Abstract:

To investigate the influence of surcharge on bearing capacity, model tests were performed. In the tests, 5 kPa and 10 kPa surcharge was applied on silt respectively. The bearing capacity factor Nq is smaller than theoretical solution, and is only of 60.3% and 80.5% of theoretical solution. Model test show that the ground failure mode is not general shear failure mode in condition of ground under surcharge. In bearing capacity calculation, if bearing capacity factor theoretical solution which is from general shear failure mode is applied, the result will be overestimate.

APA, Harvard, Vancouver, ISO, and other styles

30

Serra, Mattia, Ferruccio Resta, and Francesco Ripamonti. "Dependent modal space control: Experimental test rig." Journal of Vibration and Control 23, no. 15 (2015): 2418–29. http://dx.doi.org/10.1177/1077546315616699.

Full text

Abstract:

This article presents the experimental validation of a new control technique for reducing vibration in flexible structures: Dependent modal space control. While the classic independent modal space control allows only the frequency and the damping of the controlled modes to be changed, dependent modal space control can also impose the controlled mode shapes. Depending on the kind and number of sensors and actuators available for control, the mode shape can be imposed in both a direct and an indirect way. Owing to the need for modal sensors and actuators for direct mode shape imposition, the sec

APA, Harvard, Vancouver, ISO, and other styles

31

Yang, Inyoung, Kyung-jae Lee, Yang-ji Lee, and Chun-taek Kim. "Ramjet Mode Combustion Test for a Dual-Mode Ramjet Engine Model with a Large Backward-Facing Step." Journal of the Korean Society of Propulsion Engineers 20, no. 6 (2016): 83–90. http://dx.doi.org/10.6108/kspe.2016.20.6.083.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

KIM, C. M., and D. S. BAI. "ANALYSES OF ACCELERATED LIFE TEST DATA UNDER TWO FAILURE MODES." International Journal of Reliability, Quality and Safety Engineering 09, no. 02 (2002): 111–25. http://dx.doi.org/10.1142/s0218539302000706.

Full text

Abstract:

This paper proposes a method of estimating the lifetime distribution at use condition for constant stress accelerated life tests when an extrinsic failure mode as well as intrinsic one exists. A mixture of two distributions is introduced to describe these failure modes. It is assumed that the log lifetime of each failure mode follows a location-scale distribution and a linear relation exists between the location parameter and the stress. An estimation procedure using the expectation and maximization algorithm is proposed and specific formulas for Weibull distribution are obtained. Simulation s

APA, Harvard, Vancouver, ISO, and other styles

33

Lee, Myungjae, Mintaek Yoo, Hyun-Seok Jung, Ki Hyun Kim, and Il-Wha Lee. "Study on Dynamic Behavior of Bridge Pier by Impact Load Test Considering Scour." Applied Sciences 10, no. 19 (2020): 6741. http://dx.doi.org/10.3390/app10196741.

Full text

Abstract:

In this study, for the establishment of a safety evaluation method, non-destructive tests were performed by developing a full-scale model pier and simulating scour on the ground adjacent to a field pier. The surcharge load (0–250 kN) was applied to the full-scale model pier to analyze the load’s effect on the stability. For analyzing the pier’s behavior according to the impact direction, an impact was applied in the bridge axis direction, pier length direction, and pier’s outside direction. The impact height corresponded to the top of the pier. A 1-m deep scour was simulated along one side of

APA, Harvard, Vancouver, ISO, and other styles

34

Ingvalson, Erin M., and Michael J. Wenger. "A strong test of the dual-mode hypothesis." Perception & Psychophysics 67, no. 1 (2005): 14–35. http://dx.doi.org/10.3758/bf03195010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Lee, Hayden, S. C. Su, and Daniel Baumann. "The superhorizon test of future B-mode experiments." Journal of Cosmology and Astroparticle Physics 2015, no. 02 (2015): 036. http://dx.doi.org/10.1088/1475-7516/2015/02/036.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Ji-Feng, Han, Zhang Jia-Wen, Chen Jin, et al. "Test of BESIII RPC in the avalanche mode." Chinese Physics C 32, no. 5 (2008): 373–76. http://dx.doi.org/10.1088/1674-1137/32/5/009.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Su, Hung-Der, Bi-Shiou Chiou, Chin-Yuan Ko, et al. "Bi-Mode Breakdown Test Methodology of Ultrathin Oxide." Japanese Journal of Applied Physics 42, Part 1, No. 12 (2003): 7232–37. http://dx.doi.org/10.1143/jjap.42.7232.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Kirihata, T., Hing Wong, J. K. DeBrosse, et al. "Flexible test mode approach for 256-Mb DRAM." IEEE Journal of Solid-State Circuits 32, no. 10 (1997): 1525–34. http://dx.doi.org/10.1109/4.634660.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Endo, Masahiro, Atsushi Kusaba, Saburo Okazaki, Keiji Yanase, Shigeaki Moriyama, and Hisao Matsunaga. "OS0711 On Shear Mode Fatigue Crack Growth Test." Proceedings of the Materials and Mechanics Conference 2011 (2011): _OS0711–1_—_OS0711–3_. http://dx.doi.org/10.1299/jsmemm.2011._os0711-1_.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Miller, Patricia H., Suzanne D. Baxter, Julie A. Royer, et al. "Children’s social desirability: Effects of test assessment mode." Personality and Individual Differences 83 (September 2015): 85–90. http://dx.doi.org/10.1016/j.paid.2015.03.039.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Raman, S. Ganesh Sundara, and V. M. Radhakrishnan. "Low Cycle Fatigue Life: Dependence on Test Mode." Journal of Materials Engineering and Performance 13, no. 1 (2004): 88–92. http://dx.doi.org/10.1361/10599490417588.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Robinson, P., and D. Q. Song. "A New Mode Iii Delamination Test for Composites." Advanced Composites Letters 1, no. 5 (1992): 096369359200100. http://dx.doi.org/10.1177/096369359200100501.

Full text

Abstract:

This letter reports a concept for a Mode III test method which eliminates the Mode II component experienced with the split cantilever beam test method. The success of the design is demonstrated by finite element analyses and by SEM fracture surface photographs. Initial test results are reported for a carbon fibre epoxy composite.

APA, Harvard, Vancouver, ISO, and other styles

43

Lynch, W., M. Casacca, and Z. Salameh. "Linear current mode controller for battery test applications." IEEE Transactions on Energy Conversion 8, no. 1 (1993): 20–25. http://dx.doi.org/10.1109/60.207401.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Davies, J., and K. W. So. "Further development of fracture test in mode II." International Journal of Fracture 31, no. 1 (1986): R19—R21. http://dx.doi.org/10.1007/bf00033934.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

jameil, ahmed, Saad Al-Azawi, Yasir Abbas, and saad albawi. "Test Mode for FIR Filter Design Using FPGA." Journal of Adv Research in Dynamical & Control Systems, no. 01-Special Issue (June 7, 2019): 1828–36. https://doi.org/10.5281/zenodo.14472530.

Full text

Abstract:

This paper presents FPGA hardware implementation of circuit under test (CUT) in design for testability (DFT). A three-tap FIR filter is selected and implemented as a CUT using a low-cost test pattern generator (TPG). Full and partial scan design strategies are introduced in this paper. The full scan is proposed to achieve high fault detection efficiency considering minimum possible area overhead for the whole CUT at the same time. While the partial scan individually detects the fault in any part of the CUT. The proposed CUT architecture is implmented in VHDL and tested for area and timing opti

APA, Harvard, Vancouver, ISO, and other styles

46

Lee, Ki-Hong, Myeong-Hoon Jo, Yong-Wook Kwon, Seong-Ho Sim, and Ki-Won Lee. "IFF Function Design and Mode 5 AIMS Certification Test for CSR-II." Journal of Korean Institute of Electromagnetic Engineering and Science 34, no. 9 (2023): 683–95. http://dx.doi.org/10.5515/kjkiees.2023.34.9.683.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Volkoff, T. J., and Yiğit Subaşı. "Ancilla-free continuous-variable SWAP test." Quantum 6 (September 8, 2022): 800. http://dx.doi.org/10.22331/q-2022-09-08-800.

Full text

Abstract:

We propose a continuous-variable (CV) SWAP test that requires no ancilla register, thereby generalizing the ancilla-free SWAP test for qubits. In this ancilla-free CV SWAP test, the computational basis measurement is replaced by photon number-resolving measurement, and we calculate an upper bound on the error of the overlap estimate obtained from a finite Fock cutoff in the detector. As an example, we show that estimation of the overlap of pure, centered, single-mode Gaussian states of energy E and squeezed in opposite quadratures can be obtained to error &#x03F5; using photon statistics b

APA, Harvard, Vancouver, ISO, and other styles

48

de Moura, M. F. S. F., J. M. Q. Oliveira, J. J. L. Morais, and J. Xavier. "Mixed-mode I/II wood fracture characterization using the mixed-mode bending test." Engineering Fracture Mechanics 77, no. 1 (2010): 144–52. http://dx.doi.org/10.1016/j.engfracmech.2009.09.014.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Woo, Jongwoon, and Seonbong Lee. "Development of Proving Ground Test Mode for Durability Test of Active Suspension System." Transactions of the Korean Society of Automotive Engineers 21, no. 6 (2013): 16–23. http://dx.doi.org/10.7467/ksae.2013.21.6.016.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Zhang, Li Min, Shu Ran Lv, and Hong Yan Liu. "Test Study on Dynamic Mechanical Property of Jointed Rock Mass." Advanced Materials Research 868 (December 2013): 282–86. http://dx.doi.org/10.4028/www.scientific.net/amr.868.282.

Full text

Abstract:

Failure modes of jointed rock mass with different joint dip angle, joint center continuity degree, joint sets, load strain ratio and joint filling width under SHPB test are studied with model tests. The results show that failure modes and dynamic strength of jointed rock mass are much related to joint geometry. To rock mass with a single joint, its strength and failure mode are greatly controlled by the joint dip angle. The dynamic strength of the samples with joint dip angle 0° and 90°, whose failure modes are both tensile failure, is 90% and 71% of that of intact one, respectively. The dynam

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!