Log in

Relevant bibliographies by topics / Test structure design / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Test structure design.

Dissertations / Theses on the topic 'Test structure design'

Author: Grafiati

Published: 31 May 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Test structure design.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Brasel, Michael D. (Michael David). "The Effectiveness of a Mediating Structure for Writing Analysis Level Test Items From Text Based Instruction." Thesis, University of North Texas, 1989. https://digital.library.unt.edu/ark:/67531/metadc332268/.

Full text

Abstract:

This study is concerned with the effect of placing text into a mediated structure form upon the generation of test items for analysis level domain referenced test construction. The item writing methodology used is the linguistic (operationally defined) item writing technology developed by Bormuth, Finn, Roid, Haladyna and others. This item writing methodology is compared to 1) the intuitive method based on Bloom's definition of analysis level test questions and 2) the intuitive with keywords identified method of item writing. A mediated structure was developed by coordinating or subordinating

APA, Harvard, Vancouver, ISO, and other styles

2

Gibson, David. "Statistical prediction of integrated circuit performance based on circuit design and test structure evaluation." Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/15781.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Gupta, Raj K. Ph D. 1969. "Electrostatic pull-in test structure design for in-situ mechanical property measurements of microelectromechanical systems (MEMS)." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/10454.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Riccò, Federico. "Design and engineering of 100% polyurethane sandwich structure for sanitary application." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021.

Find full text

Abstract:

This work is based on a team research project developed at DUNA-Corradini SpA. The project consists in design and characterization of innovative composite structure, used principally for the production of shower trays for sanitary application. Starting from a set of existing PUR materials trademark of DUNA-Corradini SpA, DUNAPOL® T products, we worked to combine them to obtain a new composite sandwich structure for 100% PU based shower trays manufacturing, avoiding the use of glass fibres and styrene-based materials in the final product. The final prototype must be able to satisfy costum

APA, Harvard, Vancouver, ISO, and other styles

5

Bederr, Hakim. "Contributions a la conception en vue du test d'operateurs a structure iterative." Grenoble INPG, 1994. http://www.theses.fr/1994INPG0120.

Full text

Abstract:

L'importance des operateurs arithmetiques et logiques dans les architectures de parties operatives de microprocesseurs, rend indispensable le recours a des techniques efficaces de test hors-ligne (validation de prototypes, tri de fin de fabrication et maintenance) et en-ligne (detection concurrente d'erreur) pour garantir un certain niveau de fiabilite des ordinateurs. La regularite structurelle de ces operateurs, ainsi que leurs proprietes mathematiques, facilitent l'analyse des criteres d'observabilite et de controlabilite et permettent, dans la plupart des cas, de generer des algorithmes de

APA, Harvard, Vancouver, ISO, and other styles

6

Bugnet, Henri. "Conception et test d'un circuit intégré (ASIC) : application aux chambres multifils et aux photomultiplicateurs de l'expérience GRAAL." Université Joseph Fourier (Grenoble), 1995. http://www.theses.fr/1995GRE10192.

Full text

Abstract:

Le projet de physique nucleaire graal installe a grenoble aupres du synchrotron europeen (esrf), fournit un faisceau de photons etiquetes de haute energie (jusqu'a 1,5 gev). Ce faisceau, produit par retrodiffusion compton, est facilement polarisable et il permet de sonder d'une maniere originale la structure du nucleon. L'ensemble de detection associe comprend entre autres, des chambres a fils proportionnelles et des hodoscopes de scintillateurs. Un ensemble de six asic (application specific integrated circuit) a ete developpe, il assure le traitement des signaux des detecteurs et le condition

APA, Harvard, Vancouver, ISO, and other styles

7

Mills, Richard P. III. "Design and optimization of RF test structures for mm-wave circuit design." Thesis, Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/42922.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Taylor, David. "Design of certain silicon semi-customised structures incorporating self-test." Thesis, University of Huddersfield, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329218.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Sadeeq, J. A. "Interpretation of pressuremeter tests for pile design." Thesis, University of Newcastle Upon Tyne, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.386085.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Friar, Robert James. "Analysis, design, and measurement of on-wafer transmission line test structures /." Digital version accessible at:, 2000. http://wwwlib.umi.com/cr/utexas/main.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Tao, Yunxiang. "Advanced numerical analysis and fire testing of cold-formed steel hollow section stud walls." Thesis, Queensland University of Technology, 2021. https://eprints.qut.edu.au/226716/1/Yunxiang_Tao_Thesis.pdf.

Full text

Abstract:

This research investigated the behaviour of light gauge steel frame walls made of cold-formed steel hollow section studs under both ambient and fire conditions using full scale experimental and advanced numerical studies. It developed and improved new structural and fire design rules for hollow section stud walls that can be included in the Australian steel structures standard. Importantly, it showed that such wall systems have superior fire resistance than conventional wall systems used currently. Overall, this research has sufficiently improved the knowledge of light steel walls made of holl

APA, Harvard, Vancouver, ISO, and other styles

12

Consolini, Laura. "Structural glass between design, tests and models." Doctoral thesis, Università Politecnica delle Marche, 2011. http://hdl.handle.net/11566/241923.

Full text

Abstract:

La ricerca svolta si è configurata come indagine sul vetro strutturale. Il vetro è un materiale nuovo nel campo dei materiali strutturali, in quanto fino a poco tempo fa veniva utilizzato solo in finestrature e/o facciate continue. Invece negli ultimi anni si è visto che il vetro è sempre più utilizzato per parti direttamente strutturali, quali pavimentazioni, scale, balaustre, pensiline, coperture, ecc. In questi casi il vetro deve comportarsi come un materiale da costruzione a tutti gli effetti, quale il calcestruzzo armato o l'acciaio. Guardandolo da questo punto di vista, si vede co

APA, Harvard, Vancouver, ISO, and other styles

13

Trutalli, Davide. "Insight into seismic behaviour of timber shear-wall systems." Doctoral thesis, Università degli studi di Padova, 2016. http://hdl.handle.net/11577/3424481.

Full text

Abstract:

This Ph.D. dissertation is the result of a three-year research activity focused on structural and seismic engineering applied to innovative timber constructive systems. The main purpose is to give a contribution to international scientific research and current design practice about the seismic behaviour of timber shear-wall systems, which still represent an innovation in the construction industry and are being developed due to their favourable characteristics. An initial overview on the use of main timber structural systems in seismic-prone areas for low- and medium-rise buildings is provided

APA, Harvard, Vancouver, ISO, and other styles

14

Pimenta, Tales Cleber. "Optimal design of VLSI structures with built-in self test based on reduced pseudo-exhaustive testing." Ohio : Ohio University, 1992. http://www.ohiolink.edu/etd/view.cgi?ohiou1173755841.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Klopp, Gregory Mark. "Seismic design of unreinforced masonry structures /." Title page, contents and abstract only, 1996. http://web4.library.adelaide.edu.au/theses/09PH/09phk658.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Gallop, Bruce Joseph. "ATLAS SCT readout and barrel macro-assembly testing and design of MAPS test structures." Thesis, University of Birmingham, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.433500.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Klemm, Markus. "Acoustic Simulation and Characterization of Capacitive Micromachined Ultrasonic Transducers (CMUT)." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-225933.

Full text

Abstract:

Ultrasonic transducers are used in many fields of daily life, e.g. as parking aids or medical devices. To enable their usage also for mass applications small and low- cost transducers with high performance are required. Capacitive, micro-machined ultrasonic transducers (CMUT) offer the potential, for instance, to integrate compact ultrasonic sensor systems into mobile phones or as disposable transducer for diverse medical applications. This work is aimed at providing fundamentals for the future commercialization of CMUTs. It introduces novel methods for the acoustic simulation and characteriz

APA, Harvard, Vancouver, ISO, and other styles

18

Neckel, Wesling Bruno. "Fabrication, caractérisation et modélisation des transistors à effet de champ émergents." Electronic Thesis or Diss., Bordeaux, 2025. http://www.theses.fr/2025BORD0055.

Full text

Abstract:

Au cours des dernières décennies, la mise à l'échelle a été utilisée pour atteindre les objectifs d'amélioration de la technologie des transistors à effet de champ (FET), en la rendant plus puissante et plus efficace. La mise à l'échelle tend à s'arrêter en raison de limites physiques, ce qui conduit à de nouvelles approches visant à accroître les fonctionnalités des transistors et des circuits. Les transistors à effet de champ à nanofils verticaux sans jonction (JL-VNWFET) conviennent à l'intégration 3D grâce à des canaux uniformément dopés qui éliminent le dopage complexe et peuvent être com

APA, Harvard, Vancouver, ISO, and other styles

19

Xie, Qin, and 谢琴. "Test design and use, preparation, and performance: a structural equation modeling study of consequentialvalidity." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2010. http://hub.hku.hk/bib/B44548692.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Bower, Jennifer L. "Structural design of an innovative electrical connector for satellite test of the equivalence principle /." May be available electronically:, 2008. http://proquest.umi.com/login?COPT=REJTPTU1MTUmSU5UPTAmVkVSPTI=&clientId=12498.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Sobe, Udo, Karl-Heinz Rooch, and Dietmar Mörtl. "Simulation and Analysis of Analog Circuit and PCM (Process Control Monitor) Test Structures in Circuit Design." Universitätsbibliothek Chemnitz, 2007. http://nbn-resolving.de/urn:nbn:de:swb:ch1-200700919.

Full text

Abstract:

PCM test structures are commonly used to check the produced wafers from the standpoint of the technologist. In general these structures are managed inside the FAB and are focused on standard device properties. Hence their development and analysis is not driven by analog circuit blocks, which are sensitive or often used. Especially for DFM/Y of analog circuits the correlation between design and technology has to be defined. The knowledge of electrical behavior of test structures helps to improve the designer's sensitivity to technological questions. This paper presents a method to bring the PCM

APA, Harvard, Vancouver, ISO, and other styles

22

Siahaan, Ropalin. "Structural behaviour and design of rivet fastened rectangular hollow flange channel beams." Thesis, Queensland University of Technology, 2017. https://eprints.qut.edu.au/106913/1/Ropalin_Siahaan_Thesis.pdf.

Full text

Abstract:

This thesis presents a study into the structural behaviour and design of the innovative rivet fastened Rectangular Hollow Flange Channel Beams (RHFCB). The RHFCB utilizes the inexpensive self-pierce rivet fastening in its fabrication, providing cost effective structural solutions in floor systems. The first part of the thesis focuses on the section moment capacities of the beams subject to local buckling effects while the second part investigates the member moment capacities of intermediate span beams subject to the unique lateral distortional buckling effects. Each part involves experimental

APA, Harvard, Vancouver, ISO, and other styles

23

Schulze, Robert. "Strukturintegrierbare Sensoren auf Basis piezoelektrischer Polymere." Doctoral thesis, Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-224135.

Full text

Abstract:

Die vorliegende Arbeit beschreibt die Entwicklung von Sensoren in einer neuen, großserienfähigen Technologie. Mit dem Mehrkomponentenmikrospritzgießverfahren werden mechanische Sensorstrukturen aus (faserverstärktem) Kunststoff an polymere piezoelektrische Wandler angebunden. Die hergestellten Aufnehmer können über die Weiterverarbeitung mit Hybridtechnologien für die Strukturintegration eingesetzt werden. Diese Dissertation stellt Entwurfsmethoden und Modelle zur Vorausberechnung der neuartigen Sensoren bereit, die zur Qualifizierung der neuen Technologie benötigt werden. Dazu werden bekannte

APA, Harvard, Vancouver, ISO, and other styles

24

VAZZANO, Santo. "An innovative moment resisting steel connection: optimal design formulations, practical applications and experimental tests." Doctoral thesis, Università degli Studi di Palermo, 2023. https://hdl.handle.net/10447/579290.

Full text

Abstract:

This thesis concerns the study of an innovative moment resisting connection device to be adopted in the so-called moment resisting steel frames. Following previous seismic events, such as Northridge in 1994, many steel structures characterized by welded connections between beams and columns experienced extended damages and diffused brittle failures, making the facilities unserviceable and economically disadvantageous to repair. The answers to this problem is represented by a large number of studies, where several proposals for different devices, as well as special technical solutions, are avai

APA, Harvard, Vancouver, ISO, and other styles

25

Walker, Gabriel T. "Design, Optimization, Analysis and Testing of Additive Manufactured Compressor Stage Using COTS Turbocharger Driven Custom Test Rig." University of Cincinnati / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1595845858246855.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

MISHRA, Huma Kanta. "Experimental and Analytical Studies on Scrap Tire Rubber Pads for Application to Seismic Isolation of Structures." 京都大学 (Kyoto University), 2012. http://hdl.handle.net/2433/160993.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Kale, Amit Anand. "Interaction of conservative design practices, tests and inspections in safety of structural components." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0013115.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Collette, Kristin A. "Comparisons of structural designs in fire." Link to electronic thesis, 2007. http://www.wpi.edu/Pubs/ETD/Available/etd-050307-182832/.

Full text

Abstract:

Thesis (M.S.) -- Worcester Polytechnic Institute.<br>Keywords: Office buildings; Steel beams; Lumped parameter method; Cardington Tests; Design fire curves . Includes bibliographical references (leaves 144-146).

APA, Harvard, Vancouver, ISO, and other styles

29

Knighton, Jaren Tolman. "Investigation of Laboratory Test Procedures for Assessing the Structural Capacity of Geogrid-Reinforced Aggregate Base Materials." BYU ScholarsArchive, 2015. https://scholarsarchive.byu.edu/etd/4443.

Full text

Abstract:

The modulus of aggregate base layers in pavement structures can potentially be increased through the use of geogrid. However, methods for determining how much structural benefit can be expected from a given geogrid product have not been standardized. A laboratory testing protocol is therefore needed to enable evaluation, in terms of modulus or California bearing ratio (CBR), for example, of the degree of improvement that may be achieved by a given geogrid. Consequently, the objective of this research was to identify a laboratory test method that can be used to quantify improvements in structur

APA, Harvard, Vancouver, ISO, and other styles

30

Schulze, Robert. "Strukturintegrierbare Sensoren auf Basis piezoelektrischer Polymere." Doctoral thesis, Universitätsverlag der Technischen Universität Chemnitz, 2016. https://monarch.qucosa.de/id/qucosa%3A20688.

Full text

Abstract:

Die vorliegende Arbeit beschreibt die Entwicklung von Sensoren in einer neuen, großserienfähigen Technologie. Mit dem Mehrkomponentenmikrospritzgießverfahren werden mechanische Sensorstrukturen aus (faserverstärktem) Kunststoff an polymere piezoelektrische Wandler angebunden. Die hergestellten Aufnehmer können über die Weiterverarbeitung mit Hybridtechnologien für die Strukturintegration eingesetzt werden. Diese Dissertation stellt Entwurfsmethoden und Modelle zur Vorausberechnung der neuartigen Sensoren bereit, die zur Qualifizierung der neuen Technologie benötigt werden. Dazu werden bekannte

APA, Harvard, Vancouver, ISO, and other styles

31

Soukup, Ondřej. "Příprava a organizace výstavby mostu na Silnici II/377." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265254.

Full text

Abstract:

The subject of this thesis the construction and technological preparation for the construction of the bridge ev.č. 377-007 across the Býkovka river in the municipality Rájec - Jestřebí, which is part of the reconstruction of a main road II / 377 Bořitov - Rájec. The thesis is elaborated a technical report on the structural and technological project, coordinating construction situation, the situation with wider relationships routes following the stages, time and financial plan – by objects, study the implementation of major technological stages of the building SO203 project site equipment, desi

APA, Harvard, Vancouver, ISO, and other styles

32

Isaksson, Tonie. "DEVELOPMENT OF FATIGUE TESTING METHOD OF FORWARDER BUNK." Thesis, Umeå universitet, Institutionen för fysik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-156793.

Full text

Abstract:

The fatigue phenomena is one of the most common causes of failures in structural mechanics and is due to repeatedly applied loads. Komatsu Forest AB, one of the largest manufacturers of forest machines on planet Earth was in need of a fatigue life test of a forwarder bunk which exposes the bunk in a realistic way. Such a test extends the knowledge of the strength, but also, makes it easier to improve the evolution of the design. To develop this, knowledge about the movements, i.e. the accelerations of the forwarder and its load out in the field were of greatest importance. Therefore, measureme

APA, Harvard, Vancouver, ISO, and other styles

33

Ercan, Taylan. "Thermodynamic And Structural Design And Analysis Of A Novel Turbo Rotary Engine." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12606482/index.pdf.

Full text

Abstract:

A novel turbo rotary engine, operating according to a novel thermodynamic cycle, having an efficient compression phase, a limited temperature combustion phase followed by a long power extraction phase is designed. Thermodynamic and structural design and analysis of this novel engine is carried out and two prototypes are manufactured according to these analysis. High performance figures such as torque, power and low specific fuel consumption are calculated. Also the component tests of the manufactured prototypes are completed and their results are demonstrated.

APA, Harvard, Vancouver, ISO, and other styles

34

Al, Rifaie Mohammed Jamal. "Resilience and Toughness Behavior of 3D-Printed Polymer Lattice Structures: Testing and Modeling." Wright State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=wright1502760172343413.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Zanardo, Gabriele. "Structural Modification Approaches to Modal Design Optimisation of Vibrating Systems." Doctoral thesis, Università degli studi di Padova, 2011. http://hdl.handle.net/11577/3427526.

Full text

Abstract:

This dissertation addresses the problem of assigning the desired dynamic behaviour to vibrating systems, with particular attention on the generality of the approaches proposed. The main focus of this work is in developing structural modification approaches ensuring the feasibility and the optimality of the computed solution. The proposed approaches are suitable for both the design of new mechanical systems, and the performance optimisation of existing ones. Three formulations are proposed: in the first, the original system is modelled by means of mass and stiffness matrices, while in the secon

APA, Harvard, Vancouver, ISO, and other styles

36

Johann, Matthew A. "Fire-Robust Structural Engineering: A Framework Approach to Structural Design for Fire Conditions." Link to electronic thesis, 2002. http://www.wpi.edu/Pubs/ETD/Available/etd-1219102-155849.

Full text

Abstract:

Thesis (M.S.)--Worcester Polytechnic Institute.<br>Keywords: structural engineering; fire safety; framework approach; performance-based design; information management; finite element; lumped-parameter; laboratory tests; steel; beam; restrained; plastic analysis. Includes bibliographical references (p. 180-182).

APA, Harvard, Vancouver, ISO, and other styles

37

Öhman, Kristoffer. "The Crocodile Nose Connection : Design and laboratory tests on a novel connection for structural hollow sections." Thesis, Luleå tekniska universitet, Byggkonstruktion och brand, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-67506.

Full text

Abstract:

The great properties and clear form makes the circular hollow section (CHS) appreciated by architects. When connecting these sections today it is common to use gusset plates. The knifeplate connection where the gusset plate is inserted into a slot made at the end of a circular section, is the most used connection today. This type of connections is not seen as aesthetically pleasingby architects because of its abrupt cut of the CHS. An alternative for the knife-plate connection is the Crocodile nose connection (CN-connection). The benefits of the CN-connection is the absence of the abrupt cut a

APA, Harvard, Vancouver, ISO, and other styles

38

Anapayan, Tharmarajah. "Flexural behaviour and design of hollow flange steel beams." Thesis, Queensland University of Technology, 2010. https://eprints.qut.edu.au/36210/1/Tharmarajah_Anapayan_Thesis.pdf.

Full text

Abstract:

The LiteSteel Beam (LSB) is a new hollow flange channel section developed by OneSteel Australian Tube Mills using a patented Dual Electric Resistance Welding technique. The LSB has a unique geometry consisting of torsionally rigid rectangular hollow flanges and a relatively slender web. It is commonly used as rafters, floor joists and bearers and roof beams in residential, industrial and commercial buildings. It is on average 40% lighter than traditional hot-rolled steel beams of equivalent performance. The LSB flexural members are subjected to a relatively new Lateral Distortional Buckling mo

APA, Harvard, Vancouver, ISO, and other styles

39

Na, Gwang-Seok. "Load-displacement behavior of frame structures composed of fiber reinforced polymeric composite materials." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/26699.

Full text

Abstract:

Thesis (Ph.D)--Civil and Environmental Engineering, Georgia Institute of Technology, 2009.<br>Committee Chair: Dr. Leroy Z. Emkin; Committee Co-Chair: Dr. Abdul-Hamid Zureick; Committee Member: Dr. Dewey H. Hodges; Committee Member: Dr. Kenneth M. Will; Committee Member: Dr. Rami M. Haj-ali. Part of the SMARTech Electronic Thesis and Dissertation Collection.

APA, Harvard, Vancouver, ISO, and other styles

40

Pandiya, Nimish. "Design and Validation of a MIMO Nonlinear Vibration Test Rig with Hardening Stiffness Characteristics in Multiple Degrees of Freedom." University of Cincinnati / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1504879018436068.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Malečík, Patrik. "Stavebně technologický projekt části lékařské fakulty." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265464.

Full text

Abstract:

In my master's thesis I deal with constructive technological project of medical faculty of Charles Univerisity. The aim is to solve the structure in terms of financial, time and technology. Constructive technological project of my thesis contains site equipment, time and financial schedule, design of mechanization, technological prescription, inspection and test plan, health and safety, etc.

APA, Harvard, Vancouver, ISO, and other styles

42

Stein, Félix. "SPICE Modeling of TeraHertz Heterojunction bipolar transistors." Thesis, Bordeaux, 2014. http://www.theses.fr/2014BORD0281/document.

Full text

Abstract:

Les études qui seront présentées dans le cadre de cette thèse portent sur le développement et l’optimisation des techniques pour la modélisation compacte des transistors bipolaires à hétérojonction (TBH). Ce type de modélisation est à la base du développement des bibliothèques de composants qu’utilisent les concepteurs lors de la phase de simulation des circuits intégrés. Le but d’une technologie BiCMOS est de pouvoir combiner deux procédés technologiques différents sur une seule et même puce. En plus de limiter le nombre de composants externes, cela permet également une meilleure gestion de l

APA, Harvard, Vancouver, ISO, and other styles

43

Hossain, Muhammad Shazzad. "New mechanism-based design approaches for spudcan foundations in clay." University of Western Australia. School of Civil and Resource Engineering, 2009. http://theses.library.uwa.edu.au/adt-WU2009.0103.

Full text

Abstract:

[Truncated abstract] Three-legged mobile jack-up rigs supported on spudcan foundations are used to perform most offshore drilling in shallow to moderate water depths, and are now capable of operating in water depths up to 130 m. With the gradual move towards heavier rigs in deeper water, and continuing high accident rates during preloading of the spudcan foundations, appraisal of the performance and safety of jack-up rigs has become increasingly important. A crucial aspect of this is to improve understanding of the mechanisms of soil flow around spudcan foundations undergoing continuous large

APA, Harvard, Vancouver, ISO, and other styles

44

Perera, Nilakshi. "Structural behaviour and design of innovative hollow flange steel plate grinders." Thesis, Queensland University of Technology, 2018. https://eprints.qut.edu.au/123310/1/Liyanage%20Nilakshi%20Piyahasi_Perera_Thesis.pdf.

Full text

Abstract:

This thesis proposes a new Hollow Flange Steel Plate Girder (HFSPG) by welding industrially available cold-formed Rectangular Hollow Sections (RHS) to a web plate for use in long span construction. Design procedures presented in the national and international design guidelines were reviewed and suitable improvements were made to accurately predict the structural behaviour and capacities of HFSPGs by undertaking detailed experimental and numerical studies into their unique structural behaviour. Local buckling/yielding, global buckling and local-global interaction failures were all considered in

APA, Harvard, Vancouver, ISO, and other styles

45

D'Angelo, Giuseppina. "A comparative study of approximate tests for cross-over designs using Stein's estimator of the covariance structure of the data." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp03/MQ37112.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Corwin, Scott O. "Freight warehouse to architecture school: a representation of ideas in hardline, sketch, and text." Thesis, Virginia Polytechnic Institute and State University, 1994. http://hdl.handle.net/10919/53369.

Full text

Abstract:

The Freight Warehouse Architecture Studio is adjacent to Virginia Commonwealth University in Richmond. Although designed as an adaptive reuse, it is a direct result of two things: a reading of Eisenman's Koizumi Project and working in the office for a few weeks immediately proceeding commencement on the studio. The reading was the onset of the theory necessary for the study, and the experience in the office offered the opportunity to establish the direction for the project. The question of culture, understanding, and reading yields the question of the reconciliation of personal history and co

APA, Harvard, Vancouver, ISO, and other styles

47

Dolamune, Kankanamge Nirosha. "Structural behaviour and design of cold-formed steel beams at elevated temperatures." Thesis, Queensland University of Technology, 2010. https://eprints.qut.edu.au/33221/1/Nirosha_Dolamune_Kankanamge_Thesis.pdf.

Full text

Abstract:

Cold-formed steel members are extensively used in the building construction industry, especially in residential, commercial and industrial buildings. In recent times, fire safety has become important in structural design due to increased fire damage to properties and loss of lives. However, past research into the fire performance of cold-formed steel members has been limited, and was confined to compression members. Therefore a research project was undertaken to investigate the structural behaviour of compact cold-formed steel lipped channel beams subject to inelastic local buckling and yieldi

APA, Harvard, Vancouver, ISO, and other styles

48

Jeyaragan, Sivapathasunderam. "Flexural behaviour and design of the new built-up LiteSteel beams." Thesis, Queensland University of Technology, 2010. https://eprints.qut.edu.au/36209/1/Sivapathasunderam_Jeyaragan_Thesis.pdf.

Full text

Abstract:

LiteSteel Beam (LSB) is a new cold-formed steel beam produced by OneSteel Australian Tube Mills. The new beam is effectively a channel section with two rectangular hollow flanges and a slender web, and is manufactured using a combined cold-forming and electric resistance welding process. OneSteel Australian Tube Mills is promoting the use of LSBs as flexural members in a range of applications, such as floor bearers. When LSBs are used as back to back built-up sections, they are likely to improve their moment capacity and thus extend their applications further. However, the structural behaviour

APA, Harvard, Vancouver, ISO, and other styles

49

Arendt, Christopher D. "Adaptive Pareto Set Estimation for Stochastic Mixed Variable Design Problems." Ft. Belvoir : Defense Technical Information Center, 2009. http://handle.dtic.mil/100.2/ADA499860.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Guerrero, Bobadilla Hector. "Seismic design and performance of hospital structures equipped with buckling-restrained braces in the lakebed zone of Mexico City." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/seismic-design-and-performance-of-hospital-structures-equipped-with-bucklingrestrained-braces-in-the-lakebed-zone-of-mexico-city(5e7856c9-a9bf-47fa-a12f-f6db23dccba0).html.

Full text

Abstract:

Hospitals are regarded as some of the most important structures in society due to the service that they provide. Knowing this, governments spend large amounts of money on these facilities. Also, codes of design require to provide them more reserve capacity than that for conventional structures. However, large damages (such as collapses and permanent or temporary interruptions of their functionality) have still been observed in hospitals during strong earthquakes. Unfortunately, it is precisely after this type of event that their service is in high demand and failure in providing that service c

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!