Relevant bibliographies by topics / Texture characteristics

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Texture characteristics'

Author: Grafiati
Published: 4 June 2025
Last updated: 1 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Texture characteristics.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Texture characteristics"

1

Li, Chenchen, Xuefeng Yang, Shouren Wang, Yanjun Wang, Chongyang Lu, and Jinlong Cao. "Study on Friction and Lubrication Characteristics of Surface with Unidirectional Convergence Texture." Coatings 9, no. 12 (2019): 780. http://dx.doi.org/10.3390/coatings9120780.

Full text
Abstract:
In order to study the influence of texture on the wear and lubrication performance of the surface of the tools, three kinds of textures with unidirectional convergence morphology were processed on the surface of the samples, and each texture was designed with different area occupancy ratios. Simulation analysis shows that, owing to the reflow and convection effect of liquid in the texture, the lubricating film flowing through the textured surface has a high hydrodynamic pressure value, and the semicircular ring texture is the most prominent. By comparing the friction coefficient, when the area
APA, Harvard, Vancouver, ISO, and other styles
2

Hu, Yong, and David B. Bogy. "Effects of Laser Textured Disk Surfaces on a Slider’s Flying Characteristics." Journal of Tribology 120, no. 2 (1998): 266–71. http://dx.doi.org/10.1115/1.2834421.

Full text
Abstract:
Recently, laser texturing has captured the attention of head/media interface engineers in the hard disk drive industry because it provides precision in the landing zone placement while eliminating the transition zone of a mechanically textured landing zone. It also offers excellent tribological performance in terms of low CSS stiction and good durability. These advantages make it the solution of choice for high-end magnetic hard disk drives. This paper models the effects of laser bumps and laser textured disk surfaces on the Headway AAB slider’s flying characteristics. Two commonly used laser
APA, Harvard, Vancouver, ISO, and other styles
3

Jamwal, Gourav, Sanjay Sharma, and R. K. Awasthi. "The dynamic performance analysis of chevron shape textured hydrodynamic bearings." Industrial Lubrication and Tribology 72, no. 1 (2019): 1–8. http://dx.doi.org/10.1108/ilt-05-2019-0172.

Full text
Abstract:
Purpose This paper aims to evaluate the various dynamic performance parameters of hydrodynamic journal bearings. For this, the bearing’s inner surface is textured with chevron-shaped textures with different texture depths and number of textures in different regions/locations. Design/methodology/approach In the present study, the effect of chevron-shaped texture having different values of texture depths, locations and number of textures has been numerically simulated. The dynamic performance characteristics have been calculated by solving the fluid flow governing Reynolds equation using the fin
APA, Harvard, Vancouver, ISO, and other styles
4

Zhao, Hailin, Guilin Li, Zhaoyang Zhai, Jialin Yang, Dongya Zhang, and Yanchao Zhang. "Wear Characteristics of Textured Floating Oil Seal Surfaces: A Simulation and Experimental Study." Coatings 14, no. 9 (2024): 1087. http://dx.doi.org/10.3390/coatings14091087.

Full text
Abstract:
This study aimed to analyze the effects of surface texture on the wear amount of floating oil seals and how these effects are related to the texture parameters. To achieve this, a finite element model was constructed to simulate the frictional behavior of seal discs under both textured and non-textured conditions. The study focused on a specific set of texture parameters. The texture depth was held constant, while the area density and diameter of the textures were varied. Three different area densities were considered: 10%, 20%, and 30%. Similarly, three different texture diameters were includ
APA, Harvard, Vancouver, ISO, and other styles
5

Vignesh, G., and Debabrata Barik. "An Experimental Investigation of Dimple-Texturing on the Tribological Performance of Hardened AISI H-13 Steel." International Journal of Automotive and Mechanical Engineering 19, no. 1 (2022): 6391–402. http://dx.doi.org/10.15282/ijame.19.1.2022.03.0722.

Full text
Abstract:
The fabrication of dimple-texture is essential for reducing friction and wear in frictional interaction pairs. The tribological characteristics of the frictional interaction pairs can be improved by controlling the dimple pattern, the depth to diameter ratio, and the area density ratio. In this study, the tribological characteristics of tungsten carbide discs with various dimple-texture patterns and hardened AISI H-13 steel pins are tested experimentally using a pin on disc wear tester to identify the wear mechanism. Laser marking technology was utilized to fabricate the dimple-textures such a
APA, Harvard, Vancouver, ISO, and other styles
6

Zhang, Hongyang, Junzhen Gong, Yuejin Ma, Wen Sun, Ke Sun, and Shuzhan Bai. "Investigation of the Influence of Lubricating Oil Viscosity on the Wear-Reducing Characteristics of Cylinder Liner Surface Texture." Applied Sciences 14, no. 23 (2024): 10943. http://dx.doi.org/10.3390/app142310943.

Full text
Abstract:
Lubricating oil and cylinder liner surface textures can significantly reduce the friction coefficient between the piston ring and the cylinder liner, thereby improving engine performance. However, the friction-diminishing mechanisms between the lubricating oil and surface texture remain unclear. Properly combining lubricating oil and surface texture can achieve better friction reduction effects. This paper, based on a transient thermo-hydrodynamic model developed in MATLAB 2020a, conducted numerous simulation experiments to explore the matching characteristics of textured cylinder liners. The
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Zhaoqiang, Lingtao Sun, Bo Han, Xiaoqiang Wang, and Zhiwei Ge. "Study on the Thermohydrodynamic Friction Characteristics of Surface-Textured Valve Plate of Axial Piston Pumps." Micromachines 13, no. 11 (2022): 1891. http://dx.doi.org/10.3390/mi13111891.

Full text
Abstract:
The purpose of this paper is to study the oil film and friction characteristics of valve plates with a micro-textured surface and to explore the influence of textures of different shapes and sizes on the valve plates. Firstly, on the basis of thermohydrodynamic theory, this paper established the lubrication model of the oil film on the valve plate pair of swashplate axial piston pumps, according to the Reynolds equation. Secondly, the micro-texture was added to the mathematical model of the valve plate pair’s oil film. A combination of the energy equation, oil-film-thickness equation, elastic
APA, Harvard, Vancouver, ISO, and other styles
8

Sharma, Sanjay, Gourav Jamwal, and R. K. Awasthi. "Numerical study on steady state performance enhancement of partial textured hydrodynamic journal bearing." Industrial Lubrication and Tribology 71, no. 9 (2019): 1055–63. http://dx.doi.org/10.1108/ilt-03-2019-0083.

Full text
Abstract:
Purpose The purpose of this paper is to provide the various steady state parameters of hydrodynamic journal bearings have been determined to get maximum performance enhancement ratio. For this, the bearings inner surface is textured with triangular shape with different texture depths and a number of textures in pressure increasing region. The textured region acts as a lubricant reservoir, which provides additional film-thickness and reduce friction. Therefore, enhance the overall performance of bearing. Design/methodology/approach In the present study, the effect of triangular shaped texture o
APA, Harvard, Vancouver, ISO, and other styles
9

Ma, Yi, Ziang Li, Ziyang Yuan, Xiangkai Meng, Xudong Peng, and Jinbo Jiang. "Multi-Field Coupling Numerical Analysis and Experimental Validation of Surface-Textured Metal Seals in Roller Cone Bits." Lubricants 12, no. 1 (2024): 15. http://dx.doi.org/10.3390/lubricants12010015.

Full text
Abstract:
Metal seals play a crucial role in ensuring the dependable functioning of the bearing system in roller cone bits. Due to the intricate nature of downhole conditions, the microstructure design of sealing end faces, specifically the surface texture, is rarely used in metal seals. This study focuses on examining the applicability of surface texture technology in metal seals for cone bits to enhance the lubrication characteristics and friction and wear properties of liquid film between end faces. A multi-field coupling model of surface-textured metal seals was established and experimentally verifi
APA, Harvard, Vancouver, ISO, and other styles
10

Lin, Qiyin, and Baotong Li. "Comparison of the Influences of Surface Texture and Boundary Slip on Tribological Performances." Mathematical Problems in Engineering 2015 (2015): 1–10. http://dx.doi.org/10.1155/2015/126824.

Full text
Abstract:
Close attentions have been widely paid to the engineering textured and slip surfaces for improving bearing tribological performances. Comparison studies on the tribological characteristics of slip and textured surfaces are carried out in this work. The analysis results point out that the influences of surface texture and boundary slip on tribological performances of slider bearing are strongly similar. For the determinate surface textures, there is one and only value of slip velocity to make the tribological performances of textured and slip surfaces in agreement. The corresponding relation be
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Texture characteristics"

1

Turtinen, M. (Markus). "Learning and recognizing texture characteristics using local binary patterns." Doctoral thesis, University of Oulu, 2007. http://urn.fi/urn:isbn:9789514285028.

Full text
Abstract:
Abstract Texture plays an important role in numerous computer vision applications. Many methods for describing and analyzing of textured surfaces have been proposed. Variations in the appearance of texture caused by changing illumination and imaging conditions, for example, set high requirements on different analysis methods. In addition, real-world applications tend to produce a great deal of complex texture data to be processed that should be handled effectively in order to be exploited. A local binary pattern (LBP) operator offers an efficient way of analyzing textures. It has a simple th
APA, Harvard, Vancouver, ISO, and other styles
2

Costa, Raquel Aparecida Abrahão [UNESP]. "Materialografia quantitativa de micro estruturas complexas baseada na segmentação por texturas." Universidade Estadual Paulista (UNESP), 2006. http://hdl.handle.net/11449/94414.

Full text
Abstract:
Made available in DSpace on 2014-06-11T19:27:11Z (GMT). No. of bitstreams: 0 Previous issue date: 2006-02-24Bitstream added on 2014-06-13T19:55:27Z : No. of bitstreams: 1 costa_raa_me_guara.pdf: 2052235 bytes, checksum: a7679d1faabaecae7d1f08931905e615 (MD5)<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)<br>A pesquisa desenvolvida para reconhecimento de padrões estatísticos com base nas informações de textura, ainda possui muitos desafios a serem superados. Um deles é a extração de características a partir de imagens que apresentam pouca variação de contraste. Este tr
APA, Harvard, Vancouver, ISO, and other styles
3

Yaacob, Haryati. "A study of the effect of texture on surface dressing characteristics." Thesis, University of Ulster, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.432806.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Cowie, Eoin N. "Factors influencing texture modifying characteristics of selected strains of lactic acid bacteria." Thesis, Oxford Brookes University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.334625.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

O'Connor, R. F. "The properties and characteristics of waviness in engineering surfaces : an investigation into causes and effects." Thesis, Coventry University, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.254273.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Costa, Raquel Aparecida Abrahão. "Materialografia quantitativa de micro estruturas complexas baseada na segmentação por texturas /." Guaratinguetá : [s.n.], 2006. http://hdl.handle.net/11449/94414.

Full text
Abstract:
Orientador: Luis Rogério de Oliveira Hein<br>Banca: Fernando de Azevedo Silva<br>Banca: Carlos Frederico de Angelis<br>Resumo: A pesquisa desenvolvida para reconhecimento de padrões estatísticos com base nas informações de textura, ainda possui muitos desafios a serem superados. Um deles é a extração de características a partir de imagens que apresentam pouca variação de contraste. Este trabalho propõe um algoritmo de seleção de características de textura baseado nas característica de Haralick como a correlação e a entropia. A proposta dessa abordagem é tornar possível classificar os dados, li
APA, Harvard, Vancouver, ISO, and other styles
7

Waichungo, Wamwarī W. "Textural characteristics of low moisture-crisp foods during moisture sorption and storage /." free to MU campus, to others for purchase, 1996. http://wwwlib.umi.com/cr/mo/fullcit?p9823333.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Mok, Elise. "Effect of diet textural characteristics on the temporal rhythms of feeding in rats." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ37150.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Brown, Marissa. "Sensory characteristics and classification of commercial and experimental plain yogurts." Thesis, Manhattan, Kan. : Kansas State University, 2010. http://hdl.handle.net/2097/4114.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Dhanasettakorn, Khwankaew Grün Ingolf Lin Mengshi. "Coenzyme Q₁₀ content, composition, texture and physiochemical characteristics of pasta fortified with freeze-dried beef heart." Diss., Columbia, Mo. : University of Missouri--Columbia, 2008. http://hdl.handle.net/10355/6636.

Full text
Abstract:
Title from PDF of title page (University of Missouri--Columbia, viewed on Mar. 15, 2010). The entire thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file; a non-technical public abstract appears in the public.pdf file. Dissertation advisors: Dr. Ingolf U. Grün, Dr. Mengshi Lin. Vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Texture characteristics"

1

(1993), Oxford Symposium on Food and Cookery. Look and feel: Studies in texture, appearance and incidental characteristics of food : proceedings of the Oxford Symposium on Food and Cookery 1993. Prospect Books, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bogachek, Olga, and Francesco Grossetti. Value Relevance Of Textual Characteristics. Springer Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-79156-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Seleem, Suzanne. Cation uptake and textural characteristics of zirconia gels. Brunel University, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

A, Jensen Kenneth, Blackford Gary A, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Secondary electron emission characteristics of untreated and ion-textured titanium. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

A, Jensen Kenneth, Roman Robert F, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., eds. Secondary electron emission characteristics of molybdenum-masked, ion-textured OFHC copper. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Emory-Moore, Margot. Textural and mineralogical characteristics of nearshore sediments, eastern Baffin Island. Centre for Cold Ocean Resources Engineering, Memorial University of Newfoundland, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Davies, James A. The textual life of Dickens's characters. Barnes & Noble Books, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

A, Jensen Kenneth, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., eds. Textured carbon on copper: A novel surface with extremely low secondary electron emission characteristics. National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Davies, James A. The textual life of Dickens's characters. Macmillan, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shustov, Yuriy, Sergey Kiryuhin, Aleksandr Davydov, et al. Textile Materials Science: laboratory workshop. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1172012.

Full text
Abstract:
The main types of tests carried out in determining the characteristics of the structure of fibers, threads, webs, their mechanical and physical properties are considered.&#x0D; The laboratory workshop is designed to assist students in self-preparation for performing, conducting laboratory work on textile materials science and preparing reports on them, as well as in choosing research areas that can be performed within the framework of a particular laboratory work.&#x0D; The construction and content of the laboratory workshop meets the requirements of the federal state educational standards of
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Texture characteristics"

1

Haitjema, Han, and Richard Leach. "Surface Texture Metrological Characteristics." In CIRP Encyclopedia of Production Engineering. Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-642-35950-7_16864-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Haitjema, Han, and Richard Leach. "Surface Texture Metrological Characteristics." In CIRP Encyclopedia of Production Engineering. Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-53120-4_16864.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ross, Andrew S., and Graham B. Crosbie. "Effects of Flour Characteristics on Noodle Texture." In Asian Noodles. John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470634370.ch13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Tóth, László S. "Simulation of Persistence Characteristics of Textures During Plastic Deformation." In Microstructure and Texture in Steels. Springer London, 2009. http://dx.doi.org/10.1007/978-1-84882-454-6_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Andriejauskas, Tadas, Alex Wright, Rob Lee, Craig Thomas, Stuart McRobbie, and Neng Mbah. "Understanding user experience of in-vehicle noise based on road surface texture data." In Roads and Airports Pavement Surface Characteristics. CRC Press, 2023. http://dx.doi.org/10.1201/9781003429258-62.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zvyagin, B. B. "Structural Characteristics of Polytypes Delivered by Texture Diffraction Patterns." In X-Ray and Neutron Structure Analysis in Materials Science. Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-0767-9_46.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Davies, Chris H. J., Wen Quan Cao, Cheng Fan Gu, Rimma Lapovok, and Elena V. Pereloma. "Texture and Boundary Characteristics of Severely Deformed and Recrystallized Copper." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-443-x.177.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Karagiannis, Stefanos, Vassilis Iakovakis, John Kechagias, Nikos Fountas, and Nikolaos Vaxevanidis. "Prediction of Surface Texture Characteristics in Turning of FRPs Using ANN." In Engineering Applications of Neural Networks. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-41013-0_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Cantisani, Giuseppe, Antonio D’Andrea, Paola Di Mascio, and Giuseppe Loprencipe. "Reliance of Pavement Texture Characteristics on Mix-Design and Compaction Process." In RILEM Bookseries. Springer Netherlands, 2015. http://dx.doi.org/10.1007/978-94-017-7342-3_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tian, Xiaojing, Jun Wang, Jutian Yang, Shien Chen, and Zhongren Ma. "Study on the Mutton Freshness Using Multivariate Analysis Based on Texture Characteristics." In Computer and Computing Technologies in Agriculture IX. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48354-2_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Texture characteristics"

1

Shyamala, N., and S. MahaboobBasha. "Brain Tumor Dissection and Categorization using Texture Characteristics and Deep Learning Techniques." In 2024 5th International Conference on Smart Electronics and Communication (ICOSEC). IEEE, 2024. http://dx.doi.org/10.1109/icosec61587.2024.10722066.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Srinath, R., R. Sharmila, N. Raghavendran, M. C. Babu, K. Ramanan, and R. Saravanakumar. "Extracting and Classifying 3D Medical Image Texture Characteristics using GLCM and LBP-Based Techniques." In 2025 International Conference on Data Science, Agents & Artificial Intelligence (ICDSAAI). IEEE, 2025. https://doi.org/10.1109/icdsaai65575.2025.11011770.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Azechi, Mirai, and Shogo Okamoto. "Toward Three-Dimensional Surface Texture Display: Recognition Characteristics of Bumps and Dents Presented by Friction." In 2024 IEEE 13th Global Conference on Consumer Electronics (GCCE). IEEE, 2024. https://doi.org/10.1109/gcce62371.2024.10760950.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sonobe, Masashi, and Hideki Hashiba. "Characteristics of the texture index of damaged buildings using high-resolution satellite images due to the 2024 Noto Peninsula Earthquake." In Land Surface and Cryosphere Remote Sensing V, edited by Cheinway Hwang and Jing M. Chen. SPIE, 2025. https://doi.org/10.1117/12.3042575.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Xu, Kefan, Guanghui Zhang, Wenlong Sun, and Jiazhen Han. "Static Characteristics Analysis of Textured Thrust Bearing Based on the Multigrid Algorithm." In ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/gt2023-101497.

Full text
Abstract:
Abstract Carefully designed compliant foil structure or surface texturing can both help improve bearings’ performance. However, little research has been done on their combination: textured gas foil bearing. This paper adopted the modified compressible Reynolds equation as the pressure governing equation of bump-type foil thrust bearing, and the influence of different slip models was discussed. The predicted load capacity agrees with the literature data. This paper further presented the execution time differences between various numerical methods, including the direct, iterative, and multigrid
APA, Harvard, Vancouver, ISO, and other styles
6

Sahu, Vikas Kumar, Pravesh Chandra Shukla, and Soumya Gangopadhyay. "Comparative Evaluation of Untextured and Textured Surfaces for Wear, Wettability and Friction Characteristics." In WCX SAE World Congress Experience. SAE International, 2025. https://doi.org/10.4271/2025-01-8331.

Full text
Abstract:
&lt;div class="section abstract"&gt;&lt;div class="htmlview paragraph"&gt;Reduction of frictional losses by changing the surface roughness in the form of surface textures has been reported as an effective method in reducing friction in the boundary regime of lubrication. Laser-based micro texturing has been mostly used to create these texture patterns and it is reported that it can reduce the frictional resistance by ~20-50%. However, the use of laser-based techniques for texture preparation led to residual thermal stress and micro cracks on the surfaces. Hence, the current study emphasizes us
APA, Harvard, Vancouver, ISO, and other styles
7

Syed, Nayab Rasool, and Sashindra Kumar Kakoty. "Influence of Texture Portion and Dimple Area Density on the Tribological Characteristics of Dimple Textured Hydrodynamic Journal Bearing." In ASME 2021 Gas Turbine India Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/gtindia2021-75989.

Full text
Abstract:
Abstract There is a growing interest towards the textured bearings. The normal surface texture has the shape of micro-dimples with preselected diameter, area density and depth. The use of different amount of texturing and dimple area density, can be an effective way to improve tribological properties of textured bearing. In the present study, the tribological properties, of the dimple textured journal bearing of L/D = 2, such as attitude angle, load carrying capacity, friction variable and flow coefficient are estimated for different texture portion and dimple area density. The computationally
APA, Harvard, Vancouver, ISO, and other styles
8

Zhao, Xin, Jifeng Guo, Lin Wang, et al. "STS-GAN: Can We Synthesize Solid Texture with High Fidelity from Arbitrary 2D Exemplar?" In Thirty-Second International Joint Conference on Artificial Intelligence {IJCAI-23}. International Joint Conferences on Artificial Intelligence Organization, 2023. http://dx.doi.org/10.24963/ijcai.2023/196.

Full text
Abstract:
Solid texture synthesis (STS), an effective way to extend a 2D exemplar to a 3D solid volume, exhibits advantages in computational photography. However, existing methods generally fail to accurately learn arbitrary textures, which may result in the failure to synthesize solid textures with high fidelity. In this paper, we propose a novel generative adversarial nets-based framework (STS-GAN) to extend the given 2D exemplar to arbitrary 3D solid textures. In STS-GAN, multi-scale 2D texture discriminators evaluate the similarity between the given 2D exemplar and slices from the generated 3D textu
APA, Harvard, Vancouver, ISO, and other styles
9

Murthy, Aravind N., Izhak Etsion, and Frank E. Talke. "Analysis of Surface Textured Air Bearing Sliders With Rarefaction Effects." In ASME/STLE 2007 International Joint Tribology Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ijtc2007-44164.

Full text
Abstract:
A numerical model is developed to study the effect of texture on air bearing sliders at large Knudsen numbers. The effect of texture location, texture size, and density on the pressure generation is studied. First, a textured plane slider parallel to the disk surface is investigated and the texture parameters are determined that result in optimum pressure generation. Then, a plane inclined slider is studied using optimum texture parameters found in the parallel slider case. Thereafter, the effect of texture on the steady state flying characteristics of an actual magnetic recording slider is in
APA, Harvard, Vancouver, ISO, and other styles
10

Gunaratne, M., M. Chawla, P. Ulrich, and N. Bandara. "Experimental Investigation of Pavement Texture Characteristics." In Aerospace Atlantic Conference & Exposition. SAE International, 1996. http://dx.doi.org/10.4271/961311.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Texture characteristics"

1

Alhasan, Ahmad, Brian Moon, Doug Steele, Hyung Lee, and Abu Sufian. Chip Seal Quality Assurance Using Percent Embedment. Illinois Center for Transportation, 2023. http://dx.doi.org/10.36501/0197-9191/23-029.

Full text
Abstract:
This study investigates the use of macrotexture as an indicator of the percent embedment (PE) of aggregate in a chip seal and ultimately, as a quality assurance tool for chip seals. The study included an extensive field- and controlled-testing program from 24 chip seal sections constructed in Illinois. Surface texture measurements were acquired using a high-speed texture profiler and a stationary laser texture device. The analysis showed that stationary texture measurements were more consistent and reliable for estimating PE and characterizing chip seals in the field. Moreover, the ground trut
APA, Harvard, Vancouver, ISO, and other styles
2

Schafer, C. T. Inferred spring discharge characteristics of the Saguenay River, Quebec between ca. 1850 and ca. 1900 based on sediment texture proxy data. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2017. http://dx.doi.org/10.4095/306170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Walthert, Lorenz, Douglas R. Cobos, and Patrick Schleppi. Technical report. Equations for improving the accuracy of Decagon MPS-2 matric potential readings in dry soils. Swiss Federal Institute for Forest, Snow and Landscape Research, WSL, 2023. http://dx.doi.org/10.55419/wsl:33724.

Full text
Abstract:
Soil matric potential quantifies water availability in soils. Low soil matric potentials are difficult to measure with most in situ techniques. This is also the case for the widely-used dielectric MPS-2 sensor. This probe determines matric potential indirectly from the measured water content in its porous sensor ceramics using dielectric permittivity as a proxy for water content. The accuracy of MPS-2 readings was analyzed in desiccation experiments using 13 soils with different texture and organic carbon content and a WP4C dewpoint potentiometer as reference instrument. Further, it was explor
APA, Harvard, Vancouver, ISO, and other styles
4

Wells, Aaron, Tracy Christopherson, Gerald Frost, et al. Ecological land survey and soils inventory for Katmai National Park and Preserve, 2016–2017. National Park Service, 2021. http://dx.doi.org/10.36967/nrr-2287466.

Full text
Abstract:
This study was conducted to inventory, classify, and map soils and vegetation within the ecosystems of Katmai National Park and Preserve (KATM) using an ecological land survey (ELS) approach. The ecosystem classes identified in the ELS effort were mapped across the park, using an archive of Geo-graphic Information System (GIS) and Remote Sensing (RS) datasets pertaining to land cover, topography, surficial geology, and glacial history. The description and mapping of the landform-vegetation-soil relationships identified in the ELS work provides tools to support the design and implementation of
APA, Harvard, Vancouver, ISO, and other styles
5

Connell, S., T. J. Katsube, P. A. Hunt, and D. Walker. Textural characteristics of rocks that display significant electrical anisotropy. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1999. http://dx.doi.org/10.4095/210193.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Swan, Megan, and Christopher Calvo. Vegetation trends in pinyon-juniper woodlands in Southern Colorado Plateau Network parks. National Park Service, 2025. https://doi.org/10.36967/2312771.

Full text
Abstract:
The Southern Colorado Plateau Network has monitored vegetation and soils in pinyon-juniper woodlands at Bandelier National Monument (BAND), Grand Canyon National Park (GRCA), and Mesa Verde National Park (MEVE) since 2007. This report analyzes 15 years of data on site characteristics and changes in selected indicators. Overall, MEVE and GRCA exhibited similar conditions in Pinyon-Juniper woodlands, with sparsely vegetated understories and dense canopies dominated by Utah juniper (Juniperus osteosperma) and two-needle pinyon pine (Pinus edulis). In contrast, BAND had a more diverse understory w
APA, Harvard, Vancouver, ISO, and other styles
7

Shults, Gary W., Joseph S. Cohen, Eugen Wierbicki, and Vera C. Mason. Sensory Quality, Textural Characteristics and Hydroxyproline Content of Irradiated Beefsteaks. Defense Technical Information Center, 1998. http://dx.doi.org/10.21236/ada357562.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Andrawes, Bassem, Ernesto Perez Claros, and Zige Zhang. Bond Characteristics and Experimental Behavior of Textured Epoxy-coated Rebars Used in Concrete Bridge Decks. Illinois Center for Transportation, 2022. http://dx.doi.org/10.36501/0197-9191/22-001.

Full text
Abstract:
The deterioration of bridge decks is a problem typically associated with the corrosion of the reinforcing steel. This issue was partially controlled during the 1970s with the incorporation of the epoxy-coating protection system. However, research later demonstrated that the smooth surface resulting from the epoxy-coating application reduces most of the friction between the rebar and the surrounding concrete. Consequently, forces acting on the rib faces are reconfigured in such a way that the radial components increase, triggering the early development of cracks. To mitigate both the reduction
APA, Harvard, Vancouver, ISO, and other styles
9

MANOUCHEHRIAN, Amin, Mostafa SHARIFZADEH, and Rasoul HAMIDZADEH MOGHADAM. Estimation of UCS of Rock from its Textural Characteristics using Artificial Neural Networks. Cogeo@oeaw-giscience, 2011. http://dx.doi.org/10.5242/iamg.2011.0038.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Parfenov, Mikhail, Marya Kazakova, Alexander Selyutin, Arkady Ishchenko, and Maxim Kazakov. Graphitization as a way to stabilize textural characteristics of alumina under hydrothermal conditions. Peeref, 2023. http://dx.doi.org/10.54985/peeref.2306p2095503.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Texture characteristics' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography