Relevant bibliographies by topics / Těžiště vozidla

Contents

  1. Dissertations / Theses

Academic literature on the topic 'Těžiště vozidla'

Author: Grafiati
Published: 4 June 2021
Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Těžiště vozidla.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Dissertations / Theses on the topic "Těžiště vozidla"

1

Štěpánek, Tomáš. "Měření polohy těžiště vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228353.

Full text
Abstract:
This diploma thesis is devoted to problems of measurement centre of gravity position. At the beginning diploma thesis is created summary of methods to measuring moment of inertia and position measuring of centre of gravity of vehicle. Proposal is in-process on the basis method weighing on oblique position. And measurement is possible in Institute of automotive engineering in Brno. Is proposed measuring platform and preparative for obstruct changes of centre of gravity position at measuring. Measuring procedure is described and is derived formula toward calculation position of gravity centre of vehicle. To troubleshooting parts of platform are elaborate solidity calculations. In final parts diploma thesis are mentioned results from these measurements. Drawing documentation of platform and programme for calculation of centre of gravity of vehicle is enclosed in diploma thesis.
APA, Harvard, Vancouver, ISO, and other styles
2

Fedra, Tomáš. "Měření výškové polohy těžiště vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228902.

Full text
Abstract:
This diploma thesis deals with measurement of vehicle centre of gravity height position. All methods for measurement of CG height position are described in the first part. The second part deals with designing of device for measurement of CG height. This measurement device is analysed by Finite Element Method. The vehicle is tilt by hydraulic system. The third part shows the best tilt angle for minimal error of CG height. At the end, there is described a measuring procedure for designed device.
APA, Harvard, Vancouver, ISO, and other styles
3

Toman, Josef. "Zařízení pro měření výškové polohy těžiště vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231246.

Full text
Abstract:
This diploma thesis deals with measurement of vehicle centre of gravity height position. In the first part is created summary of methods used for measuring centre of gravity position and moment of inertia of the vehicle. In the other parts are designed and analyzed two dynamics method of measuring centre of gravity height position. This thesis presents analysis of the errors of the proposed methods, results of measurements and design of the construct adjustments device for measuring of the moments of inertia enabling its used for measuring centre of gravity height position. Some components are through analyse of tension.
APA, Harvard, Vancouver, ISO, and other styles
4

Kubica, Petr. "Zařízení pro měření výškové polohy těžiště vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232123.

Full text
Abstract:
This diploma thesis deals the with measurment of the centre of gravity height position of a road vehicle and its issues. The introduction of this thesis focuses on the determining of the position of the center of gravity and the moment of inertia of a road vehicle. The next part is about creationing of a construction plan and its verification. The thesis contains a sensitivity analysis of this device including its results. The end of the thesis informs about the executed measurment in a laboratory and about recommendations for next measurments.
APA, Harvard, Vancouver, ISO, and other styles
5

Kunovský, Martin. "Vliv polohy těžiště vozidla na jeho postřetový pohyb." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-232690.

Full text
Abstract:
This diploma thesis analyses the influence of the change to the vehicle’s center of gravity on its after-impact movement. The theoretical part of the thesis describes the basic methods which are used in investigation of the transverse, lengthwise and height position of center of gravity or the influence of center of gravity’s vehicle position to its stability and handling. Next part of the thesis deals with basic division of the road accidents and briefly describes the methods used in its analysis. Problematic maneuvers and everyday road traffic situations are stated in this thesis. Chosen situations were simulated in Virtual CRASH and PC crash programmes. Influence of the transverse, lengthwise and height position of center of gravity was investigated in these programmes with regards to the after-impact behaviour of vehicle. The obtained results were evaluated in the final chapter.
APA, Harvard, Vancouver, ISO, and other styles
6

Hanych, Jaroslav. "Konstrukční návrh zařízení pro měření výškové polohy těžiště vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378015.

Full text
Abstract:
This master's thesis deals with problems connected with measuring vehicle centre of gravity height. The research part summarizes generally known methods of measuring vehicle centre of gravity and moments of inertia. Essential part of this thesis is the design of a device for measuring the centre of gravity height of a road vehicle on a principle of measuring a period of oscillation. The height position of the platform of the device is adjustable through hydraulic cylinders. A stress-strain analysis of the design was executed through a combination of analytical methods and a finite element method. The process of measurement was described and an equation for determination of centre of gravity height was deduced. Error of measurement was estimated based on the knowledge of partial errors of measured values.
APA, Harvard, Vancouver, ISO, and other styles
7

Grác, David. "Měření momentů setrvačnosti vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231201.

Full text
Abstract:
This diploma thesis is concerned with selecting the appropriate method for determining the moment of inertia to the vertical, lateral and longitudinal axis through the centre of gravity of the vehicle. Using the special mechanical device, constructed on IAE was carried out repeated measurements of known mass properties in each axis. With the aid of obtained data was calculated measurement error. To compare the resulting values was created MBS model.
APA, Harvard, Vancouver, ISO, and other styles
8

Novotný, Michal. "Vliv uložení nákladu na bezpečnost jízdy nákladního vozidla." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-232467.

Full text
Abstract:
The objection of this dissertation is to examine effects of stowed cargo on safety driving of a vehicle. Based on general experience of weighing trucks and monitoring of cargo fixture, my attempt was to summarize related legislative conditions of the operation of trucks in terms of payload, weighing and stowing of cargo. In the first part I worked on consistent methodology of stowing and fastening of cargo on trucks. I've included various methods of loading cargo and different ways of fastening and their calculations. The main body of the second part is a practical methodology of inspectional weighing of trucks on the road. In this section I took into account the current method and procedure of inspectional weighing and measuring of trucks. During my trial weighing of different types of trucks I proved that the key factor for safe seating and lashing of load on a vehicle is determining center of gravity of the vehicle. I solve this problem in detail in the last part of my work.
APA, Harvard, Vancouver, ISO, and other styles
9

Niesner, Martin. "Návrh konstrukčního uspořádání vozidla studentské formule." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-264917.

Full text
Abstract:
The rules and specifications of competition Formula Student are the main guidelines at frame design of students' formula. This diploma work discusses frame safety and structural requirements and also requirements on mounting of engine, single axles, rear-axle differential, engine intake and exhaust system, fuel tank, control elements, and so on. In the final parts of this diploma work analysis of maximum state of stress in material of on-load frame is made and total frame torsional rigidity is calculated. Total frame torsional rigidity is compared with those of Formula Ford and with other variants of Formula Student.
APA, Harvard, Vancouver, ISO, and other styles
10

Lanči, Jaroslav. "Návrh zařízení pro měření tenzoru setrvačnosti vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230309.

Full text
Abstract:
The aim of this thesis was to design a device allowing to measure the moments of inertia of a motor vehicle around several intersecting axes. Next, a three dimensional model of the proposed device was created in programme Pro/ENGINEER. Stress analysis of individual components was performed using the finite element method (FEM) in programme ANSYS.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography