Journal articles on the topic 'The reinforcement of some of its elements in the newspaper materials'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 19 journal articles for your research on the topic 'The reinforcement of some of its elements in the newspaper materials.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Kolísko, Jiří, Vítězslav Vacek, Petr Pokorný, and Michaela Kostelecká. "Prestressing Steel Ropes - Corrosion Impact on its Properties." Solid State Phenomena 309 (August 2020): 272–80. http://dx.doi.org/10.4028/www.scientific.net/ssp.309.272.

Full text
Abstract:
Steel reinforcement made of refined maraging steel in the form of wires and tendons has been for a long time used commonly for reinforcement of prestressed concrete structures. Defects on some of them and unfortunately even accidents of some cases of bridge objects, mainly recently published by media, related to corrosion of prestressed reinforcement awoke interest of both professional and wide non-professional public related to its durability. This issue also opens up a question of durability and liability of prestressed structures. In majority of existing prestressed structures the anticorro
APA, Harvard, Vancouver, ISO, and other styles
2

Ianăşi, Aurora Cătălina. "Determination of some Mechanical Characteristics of Wood Elements Improved with Composites Materials." Advanced Materials Research 1036 (October 2014): 30–35. http://dx.doi.org/10.4028/www.scientific.net/amr.1036.30.

Full text
Abstract:
Wood is a material of construction relatively inexpensive and easy to put into practice because of its lightness, reusability, simplicity in fabrication and environmental compatibility. However, its ability to lift load small compared to other building materials, it greatly limits the range of its use. Increasing the mechanical strength of wood elements used in construction is a goal that, once achieved, would expand the use of this material, with notable economic repercussions. The use of composite materials such as CFRP (carbon fiber reinforced plastic) as reinforcement for wood elements und
APA, Harvard, Vancouver, ISO, and other styles
3

Rimshin, V. I., and S. I. Merkulov. "EXTERNAL REINFORCEMENT OF CONCRETE STRUCTURES USING COMPOSITE MATERIALS." Vestnik Tomskogo gosudarstvennogo arkhitekturno-stroitel'nogo universiteta. JOURNAL of Construction and Architecture, no. 5 (October 30, 2018): 92–100. http://dx.doi.org/10.31675/1607-1859-2018-20-5-92-100.

Full text
Abstract:
The paper describes the main directions of non-metallic composite application in concrete reinforcement. The development routes of the structural analysis with composite reinforcement are formulated. The reinforced concrete structure combines the elastic reinforcement element with an adhesive composition having inelastic properties. It is shown that the structural reliability is ensured by adhesion of composite core reinforcement to the concrete. When performing external reinforcement of composite materials, it is necessary to ensure the joint operation of reinforcing elements and the main str
APA, Harvard, Vancouver, ISO, and other styles
4

Sainov, Mikhail P., Andrei Y. Shigarov, and Sofia A. Iasafova. "Reinforcement impact on the stress-deformation state of concrete faced rockfill dam." Vestnik MGSU, no. 3 (March 2019): 347–55. http://dx.doi.org/10.22227/1997-0935.2019.3.347-355.

Full text
Abstract:
ABSTRACT Introduction. The article considers results of research of reinforced-concrete face stress-deformation state depending on availability of the reinforcement. At some ultra-high reinforced-concrete faced rockfill dams (CFRD) the transversal (horizontal) cracks were developed in the seepage-control element. It is supposed that the cause of the crack formation is high values of tensile stresses. In this connection, opinions are expressed about the necessity of strengthening the face reinforcement. However, in accordance with the experience gained, in real dams the reinforcement, as a rule
APA, Harvard, Vancouver, ISO, and other styles
5

Grujovic, Nenad, Fatima Zivic, Miroslav Zivkovic, et al. "Custom design of furniture elements by fused filament fabrication." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, no. 1 (2016): 88–95. http://dx.doi.org/10.1177/0954406216646401.

Full text
Abstract:
Additive manufacturing technologies enable rapid prototyping of different parts, according to the three-dimensional model software solution. This paper presents some aspects of fused deposition modeling technology and its application in the wood industry. The fused deposition modeling technology was initially developed for three-dimensional printing of plastic parts, whereas acrylonitrile butadiene styrene and polylactic acid plastics filament are commonly applied. Possibilities for application of different composites with fused deposition modeling in the wood industry are reviewed and present
APA, Harvard, Vancouver, ISO, and other styles
6

Olivito, Renato Sante, Alessandro Tedesco, Rosamaria Codispoti, and Giuseppe Spadea. "Strengthening Strategies of a Historical Masonry Construction." Key Engineering Materials 624 (September 2014): 627–34. http://dx.doi.org/10.4028/www.scientific.net/kem.624.627.

Full text
Abstract:
In the last years, great attention has been given to the preservation of cultural heritage, and different research areas investigated on restoration, conservation and strengthening of monumental ancient constructions. This has been great relevance especially in Italy, the country which holds the greatest cultural heritage in the world. In this context, the use of fiber-reinforced composites as strengthening materials of existing structures revealed to be an efficient, low cost and low impact technique, due to their advantages compared to the use of traditional materials. In the present work, t
APA, Harvard, Vancouver, ISO, and other styles
7

Magnitsky, I. V. "Structural failure criterion for spatially-reinforced carbon-carbon composite materials." PNRPU Mechanics Bulletin, no. 3 (December 15, 2020): 48–59. http://dx.doi.org/10.15593/perm.mech/2020.3.06.

Full text
Abstract:
This paper defines the structural strength criterion for 4DL-reinforced carbon-carbon materials. For this scheme, fiber reinforcement consists of four groups of reinforcing elements, three of them are located in parallel planes with the angles of 120° between them and the fourth one is normal to them. The paper addresses the first failure of the material corresponding to its yield stress, in this point, one of the material components deviates from linear elastic behavior. A composite material is considered to be non-uniform structurally and consists of a matrix and reinforcing elements, rods.
APA, Harvard, Vancouver, ISO, and other styles
8

Zaidir. "Repair and retrofitting of buildings post earthquake." E3S Web of Conferences 156 (2020): 05023. http://dx.doi.org/10.1051/e3sconf/202015605023.

Full text
Abstract:
This paper discusses the damage types, repair methods and retrofitting of buildings post an earthquake. Data were taken by conducting surveys and assessment of buildings directly, both engineered and non-engineered buildings affected by the West Sumatra earthquake in 2009. Some causes of damage, among them is the detailing of reinforcement that do not follow the existing standard, soft-story effect, foundation failure, low material quality and does not meet the requirements, design and implementation of the construction do not follow the rules and technical provisions of the building earthquak
APA, Harvard, Vancouver, ISO, and other styles
9

Kondratiev, A., and O. Andrieiev. "FORECASTING CHARACTERISTICS OF COMPOSITE STRENGTH ON THE BASIS OF PREFORMS IN ELEMENTS OF BUILDING STRUCTURES." Municipal economy of cities 6, no. 159 (2020): 2–9. http://dx.doi.org/10.33042/2522-1809-2020-6-159-2-9.

Full text
Abstract:
Currently, wicker composite structures for various purposes are widely used in many industries. The use of such preforms allows to provide the possibility of automation of production, high speed and efficiency of the process of manufacturing polymeric composite materials and structures based on them. Knowledge of their properties allows you to optimize the production of structures with the necessary parameters during design. In the article the model of composite material on the basis of wicker reinforcement was further developed. For the practical implementation of this model, it is sufficient
APA, Harvard, Vancouver, ISO, and other styles
10

Porco, F., G. Uva, M. Sangirardi, and S. Casolo. "About the Reliability of Punching Verifications in Reinforced Concrete Flat Slabs." Open Construction and Building Technology Journal 7, no. 1 (2013): 74–87. http://dx.doi.org/10.2174/1874836801307010074.

Full text
Abstract:
Reinforced concrete slabs are a widely diffused structural solution either in Italy, or abroad; this for a series of advantages connected to their structural conception and their performances. However, this series of advantages is obtained as a result of proper design, especially oriented to appropriately sizing the thickness of the plate itself. Moreover, for flat structures with concentrated loads, as the case of flat slabs on punctual supports, phenomenon of punching can't be neglected, as it inevitably affects the structure and so it must be taken into account even in the early stages of t
APA, Harvard, Vancouver, ISO, and other styles
11

Hamed, Gary R. "Molecular Aspects of the Fatigue and Fracture of Rubber." Rubber Chemistry and Technology 67, no. 3 (1994): 529–36. http://dx.doi.org/10.5254/1.3538689.

Full text
Abstract:
Abstract This short review highlights molecular mechanisms controlling the fracture of rubber and rubber reinforcement, with emphasis on the importance of mechano-chemistry. The manuscript is an extension and update of a previous short review published in Rubber Chemistry and Technology in 1991. All solids, including vulcanizates, contain inevitable ubiquitous flaws of various shapes and sizes. When a solid is subjected to a global stress, the local stresses at the tips of these flaws are magnified and can be many times larger than the average applied stress. Generally, there will be a single
APA, Harvard, Vancouver, ISO, and other styles
12

Bairán, Jesús Miguel, Nikola Tošić, and Albert de la Fuente. "Reliability-based assessment of the partial factor for shear design of fibre reinforced concrete members without shear reinforcement." Materials and Structures 54, no. 5 (2021). http://dx.doi.org/10.1617/s11527-021-01773-z.

Full text
Abstract:
AbstractFibre reinforced concrete (FRC) is increasingly used for structural purposes owing to its many benefits, especially in terms of improved overall sustainability of FRC structures relative to traditional reinforced concrete (RC). Such increased structural use of FRC requires safe and reliable models for its design in ultimate limit states (ULS). Particularly important are models for shear strength of FRC members without shear resistance due to the potential of brittle failure. The fib Model Code 2010 contains a model for the shear strength of FRC members without shear reinforcement and t
APA, Harvard, Vancouver, ISO, and other styles
13

Guimarães, Luisa Schivek, and Sergio Vasconcelos de Luna. "Análise do Comportamento Aplicada à Educação: aprendendo com as escolas CABAS e Morningside (Behavior Analysis Applied to Education: learning from CABAS and Morningside schools)." Revista Eletrônica de Educação 12, no. 3 (2019). http://dx.doi.org/10.14244/198271992802.

Full text
Abstract:
This report presents the fundamentals and main characteristics of two educational models: the Comprehensive Application of Behavior Analysis to Schooling – CABAS and the Morningside Model of Genarative Instruction. Both models have been developed according to behavioral-analytic principals, based on scientific methods. Besides their effectiveness has been proved scientifically. The information presented here has been extracted from materials produced by the proponents of those models and mainly from the experience of one of the authors that spent one month visiting the schools that apply them
APA, Harvard, Vancouver, ISO, and other styles
14

Dwyer, Simon. "Highlighting the Build: Using Lighting to Showcase the Sydney Opera House." M/C Journal 20, no. 2 (2017). http://dx.doi.org/10.5204/mcj.1184.

Full text
Abstract:
IntroductionThe Sydney Opera House is Australia’s, if not the world’s, most recognisable building. It is universally recognised as an architectural icon and as a masterpiece of the built environment, which has captured the imagination of many (Commonwealth of Australia 4). The construction of the Sydney Opera House, between 1959 and 1973, utilised many ground-breaking methods and materials which, together, pushed the boundaries of technical possibilities to the limits of human knowledge at the time (Commonwealth of Australia 36, 45). Typical investigations into the Sydney Opera House focus on
APA, Harvard, Vancouver, ISO, and other styles
15

De Seta, Gabriele. "“Meng? It Just Means Cute”: A Chinese Online Vernacular Term in Context." M/C Journal 17, no. 2 (2014). http://dx.doi.org/10.5204/mcj.789.

Full text
Abstract:
Fig. 1: "Xiao Ming (little Ming) and xiao meng (little sprout/cutie)", satirical take on a popular Chinese textbook character. Shared online Introduction: Cuteness, Online Vernaculars, and Digital FolkloreThis short essay presents some preliminary materials for a discussion of the social circulation of contemporary Chinese vernacular terms among digital media users. In particular, I present the word meng (萌, literally "sprout", recently adopted as a slang term for "cute") as a case in point for a contextual analysis of elements of digital folklore in their transcultural flows, local appropriat
APA, Harvard, Vancouver, ISO, and other styles
16

Sutherland, Thomas. "Counterculture, Capitalism, and the Constancy of Change." M/C Journal 17, no. 6 (2014). http://dx.doi.org/10.5204/mcj.891.

Full text
Abstract:
In one of his final pieces of writing, Timothy Leary—one of the most singularly iconic and influential figures of the 1960s counterculture, known especially for his advocacy of a “molecular revolution” premised upon hallucinogenic self-medication—proposes that [c]ounterculture blooms wherever and whenever a few members of a society choose lifestyles, artistic expressions, and ways of thinking and being that wholeheartedly embrace the ancient axiom that the only true constant is change itself. The mark of counterculture is not a particular social form or structure, but rather the evanescence of
APA, Harvard, Vancouver, ISO, and other styles
17

Bourdaa, Mélanie. "From One Medium to the Next: How Comic Books Create Richer Storylines." M/C Journal 21, no. 1 (2018). http://dx.doi.org/10.5204/mcj.1355.

Full text
Abstract:
Transmedia storytelling, as defined by Henry Jenkins in 2006 in his book Convergence Culture, highlights a production strategy that aims to augment the narration of a cultural work by scattering it across several media platforms—digital or non-digital. The term is certainly quite recent, but the practices are not new and allow us to understand the evolution of the cultural industries and the creation of a new media ecosystem. As Matthew Freeman states, transmedia storytelling always relies on industrial changes, the narration adapting itself to new media synergies and novelties to create engag
APA, Harvard, Vancouver, ISO, and other styles
18

Ting, Tin-yuet. "Digital Narrating for Contentious Politics: Social Media Content Curation at Movement Protests." M/C Journal 18, no. 4 (2015). http://dx.doi.org/10.5204/mcj.995.

Full text
Abstract:
IntroductionThe popularity of social networking sites (SNSs) bears witness to thriving movement protests worldwide. The development of new hardware technologies such as mobile devices and digital cameras, in particular, has fast enhanced visual communications among users that help document and broadcast contemporary social movements. Using social media with these technologies thus presents new opportunities for grassroots social movement organisations (SMOs) and activist groups to become narrators of their activist lives, and to promote solidarity and recognition for advancing varied civic and
APA, Harvard, Vancouver, ISO, and other styles
19

Holleran, Samuel. "Better in Pictures." M/C Journal 24, no. 4 (2021). http://dx.doi.org/10.5204/mcj.2810.

Full text
Abstract:
While the term “visual literacy” has grown in popularity in the last 50 years, its meaning remains nebulous. It is described variously as: a vehicle for aesthetic appreciation, a means of defence against visual manipulation, a sorting mechanism for an increasingly data-saturated age, and a prerequisite to civic inclusion (Fransecky 23; Messaris 181; McTigue and Flowers 580). Scholars have written extensively about the first three subjects but there has been less research on how visual literacy frames civic life and how it might help the public as a tool to address disadvantage and assist in re
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!