Journal articles: 'The side picking unit'

1

Titin Sekartika. "THE PHENOMENON OF PICKING UP BALLS IN THE PPDB PROCESS (PHENOMENOLOGY STUDY OF PICKING UP FOOTBALL AT SMK SIANG 1 BOJONEGORO)." SOSIOEDUKASI : JURNAL ILMIAH ILMU PENDIDIKAN DAN SOSIAL 9, no. 2 (November 21, 2020): 57–72. http://dx.doi.org/10.36526/sosioedukasi.v9i2.1046.

Full text

Abstract:

Private educational institutions have various methods of recruiting students according to school needs. In general, these schools prefer to implement PPDB (New Student Admissions) with the "pick up ball" method, rather than taking PPDB Online. PPDB "pick the ball" is a method of recruiting students that is followed by all school units including, educators and students. They go directly to the field to find and pick up students. So, not only students who come to the school to register, but the school will pick up prospective students. This research is a qualitative study using the Alfred Schutz phenomenology approach. Max Weber's theory of social action as the analysis knife of this research. The focus of this research study is the SMK Siang 1 Bojonegoro school unit. The selection of informants was done purposively. Data obtained through observation, indepth interview, and documentation. The results of the study, SMK Siang 1 Bojonegoro has several reasons for "picking up the ball", including: maintaining school prestige, eliminating negative stereotypes, competition between schools, increasing economic capital, bureaucratic efficiency, and the existence of a communal culture in the Bojonegoro community. There are two strategies used to make "pick the ball" successful. Hegemony strategy, actors act on the basis of franchise principles, seen from the side of efficiency and effectiveness alone. Meanwhile, the actor's Social Capital strategy acts based on moral and religious values.

APA, Harvard, Vancouver, ISO, and other styles

2

Sargent, Steven A., Fumiomi Takeda, Jeffrey G. Williamson, and Adrian D. Berry. "Harvest of Southern Highbush Blueberry with a Modified, Over-The-Row Mechanical Harvester: Use of Handheld Shakers and Soft Catch Surfaces." Agriculture 10, no. 1 (December 21, 2019): 4. http://dx.doi.org/10.3390/agriculture10010004.

Full text

Abstract:

Fresh market southern highbush blueberries are typically hand-harvested which requires an extensive labor force over a relative short period of time. With rising production costs and labor availability issues, interest in mechanical harvesting options is increasing. In 2017, an over-the-row (OTR) harvester was modified to reduce purchase cost while making hand labor more efficient. The picking heads were removed and dual worker stations were added on each side of the unit. Handheld olive shakers were suspended at each station. Experimental catch plates were installed on one side of the OTR harvester and soft, inclined surfaces over the rigid conveyors on both sides. ‘Meadowlark’ and ‘Farthing’ blueberries were harvested with this system and compared to those manually harvested by a commercial harvest crew. Samples from each harvest method were then commercially cooled and mechanically harvested fruit were commercially packed to determine packout data. Fruit firmness, bruise severity and composition were determined after one day at room temperature (22 °C) and after seven and fourteen days of storage at 1 °C. Average packout was very high for mechanically harvested fruit, 87% for ‘Meadowlark’ and 91% for ‘Farthing’. Initial firmness of both cultivars was lower for mechanically harvested fruit (208 g/mm) than hand-harvested fruit (243 g/mm). Fruit from the three treatments softened during storage, and although ‘Meadowlark’ remained firmer than ‘Farthing’ during storage, there were no differences due to catch surfaces. Hand-harvested fruit had no severe bruising (>20% of cut surface area) at harvest, increasing to 2% after seven days, while mechanically harvested fruit from both fruit collection surfaces had 3% initial severe bruising that increased to 22% during storage. ‘Farthing’ had slightly higher soluble solids content and significantly higher total titratable acidity compared to ‘Meadowlark’. Additional modifications must be made to the next-generation OTR harvester to further reduce blueberry harvest and handling impacts.

APA, Harvard, Vancouver, ISO, and other styles

3

Chen, Jiayao, Ying Wang, Dongtai Liang, Wenhao Xu, and Yang Chen. "Design of a Buffered Longitudinal Vibratory Picking Mechanism for Berry Shrub Fruits." Transactions of the ASABE 64, no. 4 (2021): 1165–71. http://dx.doi.org/10.13031/trans.14119.

Full text

Abstract:

HighlightsA spring buffering system was added to a longitudinal vibration picking mechanism for berry shrub fruits.Vibration models of the picking part and side branch were established to obtain the vibration relationship.Blueberry picking experiments were conducted to verify the performance of the picking mechanism.Abstract. Current berry shrub picking mechanisms are generally rigid structures, which can easily cause the mechanism to jam and produce rigid impacts, damaging the berry shrub branches. In view of this situation, a longitudinal vibratory picking mechanism for berry shrub fruits is proposed in this study with a spring system added to provide a buffering effect. Vibration models were established for the picking part and for the berry shrub side branch, and analysis was performed to obtain the vibration relationships. Using blueberry as an example, suitable parameters were determined through calculation and then used in blueberry picking experiments with a prototype of the picking mechanism. The experiments verified that the vibration frequency calculated with the vibration relationships can meet the requirements for picking, and the performance of the longitudinal vibratory picking mechanism for berry shrub fruits was verified. Keywords: Berry shrub picking, Buffer, Longitudinal vibration, Vibration analysis.

APA, Harvard, Vancouver, ISO, and other styles

4

Kumhála, František, Miroslav Kavka, and Václav Prošek. "Capacitive throughput unit applied to stationary hop picking machine." Computers and Electronics in Agriculture 95 (July 2013): 92–97. http://dx.doi.org/10.1016/j.compag.2013.04.012.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Yang, T. L., H. J. Yang, and Hong Wen Zhang. "Finite Element Analysis for Picking Unit on Scraper-Brush Cotton Stripper Based on Pro/E." Advanced Materials Research 215 (March 2011): 239–43. http://dx.doi.org/10.4028/www.scientific.net/amr.215.239.

Full text

Abstract:

Using of Pro/E Integrated Mechanical Structure Analysis Module, the structural analysis of scraper and brush on picking unit under a certain load of stress and deformation and optimized analysis of some primary parts were performed. The size and distribution of stress field were calculated, which could provide references for the physical prototyped and reliability design for product design. Moreover, it optimized the size of scraper and brush on picking unit that has some practical significance for structural optimization design. So the performance of structure of the designed model can be evaluated，researched and optimized in a real working environment.

APA, Harvard, Vancouver, ISO, and other styles

6

Fei, Zhenghao, John Shepard, and Stavros G. Vougioukas. "Estimation of Worker Fruit-Picking Rates with an Instrumented Picking Bag." Transactions of the ASABE 63, no. 6 (2020): 1913–24. http://dx.doi.org/10.13031/trans.13981.

Full text

Abstract:

HighlightsWe designed a low-cost instrumented picking bag that can monitor the worker’s fruit picking process.The bag can be used to estimate the worker’s picking rate for better workforce management.The bag can also be used to estimate the accumulated fruit weight and generate a yield map for orchard management.The best root mean squared error over the entire measurement range was 0.36 kg (1.8% of bag capacity).Abstract. Estimating and recording a worker’s picking rate during tree fruit harvesting can provide useful information for better workforce management, orchard platform crew management, and generation of yield maps (in combination with position). A commercial picking bag was instrumented to estimate harvested fruit weight in real-time. All electronics were placed inside an enclosure that was placed between the bag and its shoulder straps, without hindering picking motions. The electronics included two load cells to measure the forces exerted on the straps by the bag and fruits, an Arduino microcontroller, signal conditioning circuits, data storage, wireless communication components, and inertial sensors. Software was developed for data acquisition, filtering, transmission, and storage. Two calibration models were developed to estimate fruit weight. One model (model 2) used inertial sensor data to compensate for the picking bag’s angle with respect to gravity direction, while the other model (model 1) did not. Dynamic calibration experiments were performed over the entire weight range of the bag (0 to 20 kg) with reference objects of known weight (baseballs and fresh apples). The weight was divided into three ranges: light load (<8 kg), medium load (8 to 13 kg), and heavy load (>13 kg). Results showed that model 1 performed slightly better in the light load range, but model 2 was superior in the medium and heavy load ranges, presumably due to bag angle compensation. The best root mean squared error over the entire range was achieved by model 2 and was 0.36 kg (1.8% of bag capacity). In an application case study, two bags were used by workers harvesting from a platform in a commercial apple orchard. From the data, the pickers’ harvesting speeds were estimated, and the fruit yield distribution was calculated for one side of a tree row. Keywords: Calibration, Electronics, Fruit harvesting, Labor, Yield monitor.

APA, Harvard, Vancouver, ISO, and other styles

7

Pan, Jinkun, Jianning Yuan, Lei Shi, Yutong Zhang, and Zixian Guo. "Experimental Study on Picking Unit Parameters of Brush-rolling Cotton Harvester." E3S Web of Conferences 189 (2020): 01010. http://dx.doi.org/10.1051/e3sconf/202018901010.

Full text

Abstract:

In order to find the optimal combination of the picking unit parameters of the brush-rolling cotton harvester, the parameters optimization experiment were carried out. Taking the rotary speed of brush roller, the working velocity, and the number of brush plates as the experimental factors, the collect rate and the loss rate of struck cotton as the performance evaluation indexes, the quadratic regression orthogonal rotational combing design experiment was carried out. The Central Composite Design response surface method was used to establish the regression model of experimental factors and evaluation indexes, and analyze the influence of each factor on evaluation indexes. Using multi-objective optimization, the optimal parameter combination is as follows: the rotary speed of the brush roller is 350 r/min, the working velocity is 0.5 m/s, the number of brush plates is 6 rows. After the optimization test, the collect rate is 95.58%, and the loss rate of struck cotton is 1.22%. The field verification test shows that the collect rate of 4MSG-3 brush-rolling cotton harvester is 92.86%, and the loss rate of struck cotton is 1.26%. The relative error between verification test results and parameter optimization value is less than 5%, which verifies the reliability of the regression model. This study provides a theoretical basis for optimizing and improving the picking unit’s parameters of the brush-rolling cotton harvester.

APA, Harvard, Vancouver, ISO, and other styles

8

Rasmussen, Klaus. "The direction and autonomy of interdisciplinary study and research paths in teacher education." Journal of Research in Mathematics Education 5, no. 2 (June 24, 2016): 158. http://dx.doi.org/10.17583/redimat.2016.1753.

Full text

Abstract:

This paper presents a case study of didactic infrastructures to direct Study and Research Paths (SRP) in teacher education within the context of interdisciplinary inquiry. The disciplines of school mathematics and school biology, and their didactics, are made to interconnect through the investigation of a generating question concerning the illness diabetes. The resulting interdisciplinary knowledge as evidenced through students written diaries is analysed using the Anthropologic Theory of the Didactic and shows the challenge of combining two disciplines and their didactics at the same time. Two particular forms of didactic infrastructure to guide the self-sustained process of SRP are proposed and scrutinized: Selective picking and Side questions. Selective picking is shown to be a promising, yet indirect, infrastructure to steer the SRP without taking away the desired autonomy of the students. Side questions, initially proposed by Ives Chevallard, are considered in light of the case, and a number of suggestions for their characteristics and use are put forward.

APA, Harvard, Vancouver, ISO, and other styles

9

OLA, I. A., P. O. O. DADA, O. J. ADEOSUN, S. O. ISMAILA, J. K. ADEWUMI, and E. S. A. AJISEGIRI. "DEVELOPMENT OF AN INDIGENOUS ENVIRONMENTAL FRIENDLY REFUSE PICKER." Journal of Natural Sciences Engineering and Technology 14, no. 2 (July 30, 2018): 106–15. http://dx.doi.org/10.51406/jnset.v14i2.1760.

Full text

Abstract:

Handling and removal of harmful waste from our environment is a collective responsibility that all must embrace to make the world a safe habitat. A low cost environmental friendly waste picker was devel-oped. Biometric force evaluation of the end user obtained averaged 469.73 N. The refuse picker was calibrated to obtain the spring constant of 3030.73 N/m. The tool was tested and found to perform well in picking objects of different weights and of regular and irregular shapes ranging from 0.12 g to 2.72 kg. Serrated jaw enhanced the picking performance of the unit whilst picking a circular object without slipping off. The maximum safe horizontal and vertical loading recommended for the tool at picking was 0.5 kg. The picker was used to pick the smallest item, a pin of diameter 0.70 mm and weight of 0.12 g successfully. This tool can be very handy in the hospital where harmful waste such as needles, syringes and other unhealthy substances and waste must be removed from the environment. The tool was made from low cost materials with 40% less than the existing ones.

APA, Harvard, Vancouver, ISO, and other styles

10

Huang, Zhi Qiang, Ya Chao Ma, Qin Li, Li Yan Liu, Cheng Song Qiu, Pu Chun Zhao, Yong Hong Jin, and Hua Qiang Chen. "Study for Optimization of Pump Setting Depth in Tahe Heavy Oil Field." Advanced Materials Research 487 (March 2012): 864–68. http://dx.doi.org/10.4028/www.scientific.net/amr.487.864.

Full text

Abstract:

At present, the pump setting depth of machine wells in Tahe Oilfield is universally too deep as the reservoir is buried deep, viscosity of heavy oil is high, and the producing energy weakened. This will increase the input of sucker rod, oil tube material and lead to enlarge suspension point load of pumping unit mule head and energy consumption. According to the problems, on the basis of the regularity of distribution of wellbore pressure field, viscosity field, temperature field, this paper puts forward a new matching lifting technology: moving down the point of blending and picking up the pump setting depth. Moving down the point of blending can reduce the producing energy loss and enforce the crude oil’s fluidity in the wellbore ,and picking up the pump depth can reduce the cost and energy consumption, Field test shows that after the new type matching lifting technology implement, test wells are normal in operation. The pump setting depth is partly picked up and pumping unit load decreases. The single well saves thin oil by more than 10%.

APA, Harvard, Vancouver, ISO, and other styles

11

Abad, Miguel N. "‘I’m picking a side’: Thick solidarity, antiblackness and the grammar of the model minority." Race Ethnicity and Education 24, no. 3 (February 18, 2021): 303–18. http://dx.doi.org/10.1080/13613324.2021.1890558.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Shvets, Ludmila. "IMPROVEMENT OF THE SHAKER FOR FRUIT PICKING." Vibrations in engineering and technology, no. 3(98) (October 30, 2020): 56–64. http://dx.doi.org/10.37128/2306-8744-2020-3-6.

Full text

Abstract:

Fruits and berries are valuable foods that provide the necessary for human consumption: sugars, proteins, fats, mineral salts, organic acids,pectin, tannins and other substances, vitamins. Also raw materials for the food industry, which are used to make juices, jams, marmalades, jams. Due to the crisis, which covered all areas of human activity in Ukraine, the average annual consumption of fruits and berries per unit of population is less than 50% of the biologically justified norm; the area of orchards is 2.7% of the total area of agricultural land (0.8 million hectares), of which 60% is apple orchards. Improving the situation is possible through the intensification of horticulture - obtaining maximum annual yields through the introduction of the latest advances in science and technology, including in the field of mechanization of fruit production. The most time-consuming operation in the technological process of fruit production is harvesting, which, in particular for apples, accounts for 15-40% of the total cost of garden care. It can be emphasized that the cost of growing apples is 92 times higher than for a similar area of cereals. The solution to this problem is possible through the introduction of fruit harvesters, the use of which allows to increase productivity by 3.7-12.6 times, to release an average of 50 people. per day from the use of one machine and reduce operating costs by 30-50% compared to manual assembly. The most widespread at present for fruit harvesting, as evidenced by the trends of the world agricultural machinery industry, are stem vibrating machines of positional action with inertial linear working bodies. At the same time, the use of serial fruiting means, due to the impersonal process of removal, causes damage to trees and fruits, which are suitable mainly for technical processing or urgent sale in fresh form; the productivity of serial fruit harvesters is relatively low.

APA, Harvard, Vancouver, ISO, and other styles

13

Assirelli, Alberto, Katya Carbone, and Roberto Ciccoritti. "Mechanical Hop-Picking Solutions in Italian Cultivated Areas." Sustainability 12, no. 12 (June 18, 2020): 5006. http://dx.doi.org/10.3390/su12125006.

Full text

Abstract:

Hops for beer production are a crop of growing interest in Italy, requiring specialized harvesting equipment and infrastructure. Several studies have been conducted on hop cultivation and harvesting around the world, but information on Italian hop production is still very scarce. As it turns out, only a few Italian farms are self-sufficient, employing a mechanical harvesting system, while most of them resort to hand-picking. In this study, hand and mechanical hop-picking were investigated, highlighting the longest time necessary for the manual cut (65 ± 5 min for approximately 2 kg of fresh cones). Furthermore, different mechanical solutions for hop harvesting were evaluated; in particular, one hop-picking machine was tested at different settings (full speed and 75% of chain feed). At full speed, it was possible to collect an average of around 96 kg h−1 of fresh cones, while approximately 13% of cones were left unpicked. A speed reduction of approximately 25% made it possible to reduce the cone loss to 8%, with a cone collection of around 86 kg h−1. Lost and picked cones, however, were strongly related to the number of side-arms growing from the main bines. This experience made it possible to test an old solution for this emerging crop at moderate cost and with good sustainability for the Italian territory.

APA, Harvard, Vancouver, ISO, and other styles

14

Han, Liang, Cheng Jiang, and De Bin Wang. "Development of the Intelligent Tennis Vehicle." Applied Mechanics and Materials 198-199 (September 2012): 171–74. http://dx.doi.org/10.4028/www.scientific.net/amm.198-199.171.

Full text

Abstract:

This paper reviews principle and characteristics of the tennis serving machine and the tennis picking machine on the market. According to the actual situation, it intends to design a new type of tennis equipment for the tennis practitioners, which is named intelligent tennis vehicle. This machine consists of ball-storage mechanism, supply mechanism, serving mechanism, picking mechanism, frame and control circuit. This machine uses storage battery for the power supply, and it uses MCU (micro controller unit) as the controller, controlling all kinds of the mechanisms. It can help people to practice tennis, and pick up the large number of scattered tennis balls conveniently. This machine can meet the needs of different requirements, so that practitioners can better improve the tennis technology in order to achieve the purpose of fitness and training.

APA, Harvard, Vancouver, ISO, and other styles

15

Cardona, Luis F., and Kevin R. Gue. "Layouts of Unit-Load Warehouses with Multiple Slot Heights." Transportation Science 54, no. 5 (September 2020): 1332–50. http://dx.doi.org/10.1287/trsc.2020.0993.

Full text

Abstract:

We describe a method to generate layouts for unit-load warehouses that use multiple slot heights as a way to maximize warehouse space utilization. The problem has two parts: slots must be arranged into rack-bays, and rack-bays must be arranged into a layout. We describe two methods for the first subproblem, depending on whether the warehouse has directed picking and put-away. For the second, we describe a simulation model and a greedy procedure based on the duration-of-stay storage policy. We observe significant benefits of using multiple slot heights in unit-load warehouses with respect to footprint, expected travel time, and cost of racking. For a typical warehouse, we expect space savings between 25% and 35%, depending on the number of slot types, and savings of between 15% and 25% in annual operating costs.

APA, Harvard, Vancouver, ISO, and other styles

16

Hiep, Dinh, Vu V. Huy, Teppei Kato, Aya Kojima, and Hisashi Kubota. "The Effects of Picking Up Primary School Pupils on Surrounding Street’s Traffic: A Case Study in Hanoi." Open Transportation Journal 14, no. 1 (December 31, 2020): 237–50. http://dx.doi.org/10.2174/1874447802014010237.

Full text

Abstract:

Introduction: One of the significant characteristics of schools in Vietnam is that almost all parents send their children to school and/or pick up their children from school using private vehicles (motorcycles). The parents usually stop and park their vehicle on streets outside the school gates, which can lead to serious congestion and increases the likelihood of traffic accidents. Methods: The objective of this study is to find out factors affecting the picking up of pupils at primary school by evaluating the typical primary schools in Hanoi city. A binary logistic regression model was used to determine factors that influence the decision of picking up pupils and the waiting duration of parents. The behavior of motorcyclists during the process of picking up pupils at the primary school gate has been identified and analyzed in detail by the Kinovea software. Results and Discussion: The study showed that, on the way back home, almost all parents use motorbikes (89.15%) to pick up their children. During their waiting time (8.48 minutes in average), they made a lot of illegal parking actions on the street there by, causing a lot of “cognitive” errors and “crash” points surrounding in front of the primary school entrance gate. Risky picking-up behaviors were significantly observed, i.e. picking-up on opposite side of the school, making a U-turn, backing-up dangerously, parking on the middle of street, and parking on the street next to sidewalk). Conclusion: Based on the analyzed results, several traffic management measures have been suggested to enhance traffic safety and reduce traffic congestion in front of school gates. In addition, the results of the study will provide a useful reference for policymakers and authorities.

APA, Harvard, Vancouver, ISO, and other styles

17

Octavia, Tanti, and Septiananda Angelica. "Perbandingan Algoritma Simulated Annealing dan Harmony Search dalam Penerapan Picking Order Sequence." Jurnal Teknik Industri 19, no. 2 (January 9, 2018): 125. http://dx.doi.org/10.9744/jti.19.2.125-132.

Full text

Abstract:

Implementation of mobile rack warehouse is commonly used in manufacturing industry because it can minimize the warehouse area used. Applying picking orders in taking of Stock Keeping Unit (SKU) on mobile rack warehouses could give fast loading order. This research aims to find out which algorithm is better in applying picking order sequence in mobile rack warehouse. The algorithm used is Simualted Annealing (SA) and Harmony Search (HS) algorithm. Both of these algorithms will be compared in terms of the gap with the shortest path method.The result shows that the HS algorithm produces a better solution than the SA algorithm with lower CPU time, but the convergence rate of HS is lower than that of SA.HS was able to produce a better solution than the shortest path method of 9 cases, while SA only 8 cases from 15 cases.

APA, Harvard, Vancouver, ISO, and other styles

18

WANG Huan, 王欢, 辛武根 SHIN Moo-keun, 王伟 WANG Wei, 张金风 ZHANG Jin-feng, 涂志中 TU Zhi-zhong, 尹傛俊 YOON Yong-jun, 徐宇博 XU Yu-bo, and 李乘揆 LEE Seung-kyu. "Brightness viewing angle of side-type backlight unit." Chinese Journal of Liquid Crystals and Displays 29, no. 3 (2014): 345–49. http://dx.doi.org/10.3788/yjyxs20142903.0345.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Hjortland, Andrew L., and James E. Braun. "Virtual sensors for rooftop unit air-side diagnostics." Science and Technology for the Built Environment 22, no. 2 (December 22, 2015): 189–200. http://dx.doi.org/10.1080/23744731.2016.1124715.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Barrachina, J., P. Garrido, M. Fogue, Francisco J. Martinez, Juan-Carlos Cano, Carlos T. Calafate, and Pietro Manzoni. "Road Side Unit Deployment: A Density-Based Approach." IEEE Intelligent Transportation Systems Magazine 5, no. 3 (2013): 30–39. http://dx.doi.org/10.1109/mits.2013.2253159.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Self, Kevin. "A lighter side to unit conversions [Technically Speaking]." IEEE Spectrum 38, no. 2 (February 2001): 104. http://dx.doi.org/10.1109/mspec.2001.8820117.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Rajesh, K., and N. Visali. "Aggregation of Unit Commitment with Demand Side Management." Journal of Electrical Engineering & Technology 16, no. 2 (January 27, 2021): 783–96. http://dx.doi.org/10.1007/s42835-020-00637-w.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Carlson, J. D., and J. F. Hancock. "A Methodology for Determining Suitable Heat-unit Requirements for Harvest of Highbush Blueberry." Journal of the American Society for Horticultural Science 116, no. 5 (September 1991): 774–79. http://dx.doi.org/10.21273/jashs.116.5.774.

Full text

Abstract:

Fifteen years of Michigan harvest data for highbush blueberry (Vacciniun corymbosum L.) were used in conjunction with daily maximum and minimum temperatures to determine appropriate heat-unit models for first-picking dates of 13 cultivars. For each cultivar, an optimal heat-unit model was chosen after evaluating the performance of a standard method with 72 combinations of three variables: a) starting date for the heat-unit accumulations (SDATE), b) low-temperature threshold (TLOW), and c) high-temperature threshold (THIGH). The optimal model sought to include the most important criteria values with respect to model performance and to minimize the average square of the prediction error (days) and the range in that error. Compared with a strict calendar-day method of estimating harvest dates, the heat-unit models reduced the standard deviation of the prediction error from 22% to 69%, depending on cultivar.

APA, Harvard, Vancouver, ISO, and other styles

24

Carrasco, Miguel, Patricio Toledo, and Nicole D. Tischler. "Macromolecule Particle Picking and Segmentation of a KLH Database by Unsupervised Cryo-EM Image Processing." Biomolecules 9, no. 12 (November 30, 2019): 809. http://dx.doi.org/10.3390/biom9120809.

Full text

Abstract:

Segmentation is one of the most important stages in the 3D reconstruction of macromolecule structures in cryo-electron microscopy. Due to the variability of macromolecules and the low signal-to-noise ratio of the structures present, there is no generally satisfactory solution to this process. This work proposes a new unsupervised particle picking and segmentation algorithm based on the composition of two well-known image filters: Anisotropic (Perona–Malik) diffusion and non-negative matrix factorization. This study focused on keyhole limpet hemocyanin (KLH) macromolecules which offer both a top view and a side view. Our proposal was able to detect both types of views and separate them automatically. In our experiments, we used 30 images from the KLH dataset of 680 positive classified regions. The true positive rate was 95.1% for top views and 77.8% for side views. The false negative rate was 14.3%. Although the false positive rate was high at 21.8%, it can be lowered with a supervised classification technique.

APA, Harvard, Vancouver, ISO, and other styles

25

Grall‐Bronnec, Marie, Gaëlle Challet‐Bouju, Juliette Leboucher, Jean‐Marc Fève, Marie Le Moigne, Pascal Derkinderen, and Caroline Victorri‐Vigneau. "Hair‐pulling disorder complicated by skin‐picking disorder: An unknown side‐effect of dopamine replacement therapy?" Psychiatry and Clinical Neurosciences 72, no. 10 (August 23, 2018): 801–2. http://dx.doi.org/10.1111/pcn.12769.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Zhou, Bo, Xian Zhao, Jing Lu, Zuntao Sun, Min Liu, Yilu Zhou, Rongzhi Liu, and Yihua Wang. "Relating Substructures and Side Effects of Drugs with Chemical-chemical Interactions." Combinatorial Chemistry & High Throughput Screening 23, no. 4 (May 19, 2020): 285–94. http://dx.doi.org/10.2174/1386207322666190702102752.

Full text

Abstract:

Background:Drugs are very important for human life because they can provide treatment, cure, prevention, or diagnosis of different diseases. However, they also cause side effects, which can increase the risks for humans and pharmaceuticals companies. It is essential to identify drug side effects in drug discovery. To date, lots of computational methods have been proposed to predict the side effects of drugs and most of them used the fact that similar drugs always have similar side effects. However, previous studies did not analyze which substructures are highly related to which kind of side effect.Method:In this study, we conducted a computational investigation. In this regard, we extracted a drug set for each side effect, which consisted of drugs having the side effect. Also, for each substructure, a set was constructed by picking up drugs owing such substructure. The relationship between one side effect and one substructure was evaluated based on linkages between drugs in their corresponding drug sets, resulting in an Es value. Then, the statistical significance of Es value was measured by a permutation test.Results and Conclusion:A number of highly related pairs of side effects and substructures were obtained and some were extensively analyzed to confirm the reliability of the results reported in this study.

APA, Harvard, Vancouver, ISO, and other styles

27

Liao, Wu-Yu, En-Jui Lee, Dawei Mu, Po Chen, and Ruey-Juin Rau. "ARRU Phase Picker: Attention Recurrent-Residual U-Net for Picking Seismic P- and S-Phase Arrivals." Seismological Research Letters 92, no. 4 (March 24, 2021): 2410–28. http://dx.doi.org/10.1785/0220200382.

Full text

Abstract:

Abstract Seismograms are convolution results between seismic sources and the media that seismic waves propagate through, and, therefore, the primary observations for studying seismic source parameters and the Earth interior. The routine earthquake location and travel-time tomography rely on accurate seismic phase picks (e.g., P and S arrivals). As data increase, reliable automated seismic phase-picking methods are needed to analyze data and provide timely earthquake information. However, most traditional autopickers suffer from low signal-to-noise ratio and usually require additional efforts to tune hyperparameters for each case. In this study, we proposed a deep-learning approach that adapted soft attention gates (AGs) and recurrent-residual convolution units (RRCUs) into the backbone U-Net for seismic phase picking. The attention mechanism was implemented to suppress responses from waveforms irrelevant to seismic phases, and the cooperating RRCUs further enhanced temporal connections of seismograms at multiple scales. We used numerous earthquake recordings in Taiwan with diverse focal mechanisms, wide depth, and magnitude distributions, to train and test our model. Setting the picking errors within 0.1 s and predicted probability over 0.5, the AG with recurrent-residual convolution unit (ARRU) phase picker achieved the F1 score of 98.62% for P arrivals and 95.16% for S arrivals, and picking rates were 96.72% for P waves and 90.07% for S waves. The ARRU phase picker also shown a great generalization capability, when handling unseen data. When applied the model trained with Taiwan data to the southern California data, the ARRU phase picker shown no cognitive downgrade. Comparing with manual picks, the arrival times determined by the ARRU phase picker shown a higher consistency, which had been evaluated by a set of repeating earthquakes. The arrival picks with less human error could benefit studies, such as earthquake location and seismic tomography.

APA, Harvard, Vancouver, ISO, and other styles

28

Avram, MarcR, Nicole Rogers, and Shannon Watkins. "Side-effects from follicular unit extraction in hair transplantation." Journal of Cutaneous and Aesthetic Surgery 7, no. 3 (2014): 177. http://dx.doi.org/10.4103/0974-2077.146681.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Sahebi, Mir Mohammad Reza, and Seyed Hamid Hosseini. "Stochastic security constrained unit commitment incorporating demand side reserve." International Journal of Electrical Power & Energy Systems 56 (March 2014): 175–84. http://dx.doi.org/10.1016/j.ijepes.2013.11.017.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Woog, Lionel J., Anthony Vassiliou, and Rodney Stromberg. "Acquisition/Processing." Leading Edge 40, no. 6 (June 2021): 460–63. http://dx.doi.org/10.1190/tle40060460.1.

Full text

Abstract:

In seismic data processing, static corrections for near-surface velocities are derived from first-break picking. The quality of the static corrections is paramount to developing an accurate shallow velocity model, a model that in turn greatly impacts the subsequent seismic processing steps. Because even small errors in first-break picking can greatly impact the seismic velocity model building, it is necessary to pick high-quality traveltimes. Whereas various artificial intelligence-based methods have been proposed to automate the process for data with medium to high signal-to-noise ratio (S/N), these methods are not applicable to low-S/N data, which still require intensive labor from skilled operators. We successfully replace 160 hours of skilled human work with 10 hours of processing by a single NVIDIA Quadro P6000 graphical processing unit by reducing the number of human picks from the usual 5%–10% to 0.19% of available gathers. High-quality inferred picks are generated by convolutional neural network-based machine learning trained from the human picks.

APA, Harvard, Vancouver, ISO, and other styles

31

Taris, M. Luthfan, Winarso D. Widodo, and Ketty Suketi. "Kriteria Kemasakan Buah Pepaya (Carica papaya L.) IPB Callina dari Beberapa Umur Panen." Jurnal Hortikultura Indonesia 6, no. 3 (December 14, 2015): 172. http://dx.doi.org/10.29244/jhi.6.3.172-176.

Full text

Abstract:

ABSTRACT Papaya is one of the climacteric fruit that has a short shelf life. It has high potential as a source of vitamins and minerals. This research was aimed at studying the maturity criteria of postharvest ripeness of Callina papaya fruit of several picking ages and to determine the best picking ages for postharvest handling in order to extend the shelf life. Experiment was conducted in the Research Center for Tropical Horticulture, Bogor Agricultural University (PKHT, IPB) Papaya Farm Tajur, Bogor and postharvest ripening test was conducted at Postharvest Laboratory, Department of Agronomy and Horticulture, Bogor Agricultural University in February to July 2014. Experiment consisted of 4 treatments: 115, 120, 125 and 130 days after anthesis (DAA) with 3 replications. The longest shelf life for papaya Callina was obtained by fruit picked at 115 DAA (heat unit 2010.06 0C day) with the shelf life of 8 days. Picking ages 120 DAA (heat unit 2102.13 0C day) was the best picking ages for treatment to extend the shelf life because of the good chemical quality contained and its shelf life of 7 days. The older papaya fruits ripened faster than the younger papaya fruit. Younger papaya has a lower respiration rate than the older papaya. Picking ages did not affect the physical quality but affect the chemical quality of papaya fruit at the same postharvest maturity level.Kata kunci: Callina, chemical quality, physical quality, shelf life ABSTRAK Pepaya merupakan salah satu buah klimakterik yang memiliki daya simpan pendek, tetapi memiliki potensi yang tinggi sebagai sumber vitamin dan mineral. Penelitian ini bertujuan untuk mempelajari kriteria kematangan pascapanen buah pepaya Callina dari beberapa umur panen dan menentukan saat panen terbaik untuk penanganan pascapanen dalam rangka memperpanjang masa simpan. Buah untuk percobaan diperoleh dari kebun pepaya Pusat Kajian Hortikultura Tropika, Institut Pertanian Bogor (PKHT, IPB) Tajur, Bogor dan pengujian kematangan pascapanen dilakukan di Laboratorium Pascapanen, Departemen Agronomi dan Hortikultura, Institut Pertanian Bogor pada bulan Februari - Juli 2014. Percobaan terdiri atas 4 perlakuan: 115, 120, 125 dan 130 hari setelah antesis (HSA) dengan 3 ulangan. Umur simpan terlama pepaya Callina diperoleh pada umur panen 115 HSA (satuan panas sebesar 2010.06 0C hari) dengan umur simpan 8 hari. Umur panen 120 HSA (satuan panas sebesar 2102.13 0C hari) merupakan umur panen terbaik untuk perlakuan memperpanjang umur simpan karena mutu kimia baik dengan umur simpan 7 hari. Buah pepaya yang dipanen tua lebih cepat masak dibandingkan dengan buah pepaya yang dipanen muda. Pepaya yang dipanen muda memiliki laju respirasi yang lebih rendah dibandingkan dengan pepaya yang dipanen tua. Umur panen tidak mempengaruhi mutu fisik tetapi mempengaruhi mutu kimia buah pepaya pada tingkat kematangan pascapanen yang sama.Kata kunci: Callina, mutu fisik, mutu kimia, umur simpan

APA, Harvard, Vancouver, ISO, and other styles

32

Zhao, Shi Yong, An Ning Zhou, and Shu Zhan Lv. "Study on Electrochemical Flotation of Low Rank Coal Macerals." Advanced Materials Research 734-737 (August 2013): 2399–404. http://dx.doi.org/10.4028/www.scientific.net/amr.734-737.2399.

Full text

Abstract:

Coal component is the basic unit of coal, each component of coal has its special processing properties, Now under the demand of energy conservation and environmental protection , how to sort coal components reasonably and effectively has become a problem needed to resolve immediately. Picking vitrain and fusain by hand, analyzing the pH and add in different solution under the condition of different drugs both surface potential difference, and through the flotation tests determine the appropriate separation conditions. The results show that the enrichment rate of the maceral have improved by electrochemical flotation method .

APA, Harvard, Vancouver, ISO, and other styles

33

ANLIKER, ELMAR, ANDREAS SONDEREGGER, and MARCO TOIGO. "Side-to-Side Differences in the Lower Leg Muscle–Bone Unit in Male Soccer Players." Medicine & Science in Sports & Exercise 45, no. 8 (August 2013): 1545–52. http://dx.doi.org/10.1249/mss.0b013e31828cb712.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Xu, Long Yun, Fang Ye, Wei Zhang, Shuo Wu, Jian Fu Zhao, Hang Guo, and Chong Fang Ma. "Two-Side-Simultaneously-Observing Test System of Passive DMFC." Advanced Materials Research 718-720 (July 2013): 881–85. http://dx.doi.org/10.4028/www.scientific.net/amr.718-720.881.

Full text

Abstract:

In order to test passive direct methanol fuel cell and simultaneously observe anode and cathode of a fuel cell, we designed and built a test system. The test system consists of four units: temperature control unit, lighting unit, camera unit and test and data acquisition unit. With a two-floor placement design, we separated tested object and its close auxiliary components from other devices. The design is critical for changing inclination angle between outward normal of anode and gravity direction, which is important to the experiment. The control interface of the test system makes it suitable for a microgravity test system in NMLC (National Microgravity Laboratory Center). Considering the test system will be used for microgravity experiment besides routine normal gravity experiments, many specific issues have been taken into account.

APA, Harvard, Vancouver, ISO, and other styles

35

Machado, Andre G., Girish K. Hiremath, Fortino Salazar, and Ali R. Rezai. "Fracture of Subthalamic Nucleus Deep Brain Stimulation Hardware as a Result of Compulsive Manipulation: Case Report." Neurosurgery 57, no. 6 (December 1, 2005): E1318. http://dx.doi.org/10.1227/01.neu.0000187566.01731.51.

Full text

Abstract:

Abstract OBJECTIVE AND IMPORTANCE: Trichotillomania (TTM) is an impulse control disorder characterized by the recurrent pulling of one's hair resulting in noticeable hair loss. There has been no definite association drawn between Parkinson's disease (PD) and TTM, although there is a suggestion that obsessive-compulsive symptomatology may be more prevalent in left-side predominant PD. We believe that it is important to be aware of psychiatric comorbidities in the surgical treatment of PD, as they may significantly impact the postoperative course. CLINICAL PRESENTATION: We describe the case of a 58-year-old woman with an eleven-year history of left-side predominant PD who also suffered from TTM. She underwent subthalamic nucleus deep brain stimulation (STN-DBS) and subsequently developed significant wound complications of her left-sided deep brain stimulation leads. It was noted during the postoperative period that the patient was picking her left-sided, but not right-sided, incision—a behavior that was felt to be a part of this patient's impulse control disorder. INTERVENTION: Multiple wound revisions and eventual replacement of her left-sided deep brain stimulation lead was performed as a result of hardware malfunction secondary to wound manipulation by the patient. CONCLUSION: Before surgery, this patient's TTM was right-sided, but after subthalamic nucleus deep brain stimulation, her wound picking was only left-sided. This case suggests that subthalamic nucleus deep brain stimulation may have a role in unleashing the symptomatology of TTM through an as yet poorly understood mechanism. Furthermore, there is also an implication that the pathophysiology of PD and TTM may be intertwined.

APA, Harvard, Vancouver, ISO, and other styles

36

Esmero, Antonio T., Queenie Rose S. Branzuela, Jessilyn T. Paypa, Sharmaine Myka S. Rojo, Eduardo S. Sacay, Egberto F. Selerio, and Lanndon A. Ocampo. "Heuristic comparative assessment of non-conventional warehouse designs." Engineering Management in Production and Services 13, no. 1 (March 1, 2021): 89–103. http://dx.doi.org/10.2478/emj-2021-0007.

Full text

Abstract:

Abstract In the unit-load warehouse (UW) design, the aisle design problem dealing with storage space layout is the first among the three main problems. Several conventional and non-conventional designs have been proposed in the literature. In general, the assessment of UW designs is commonly carried out using analytical approaches. However, such an approach may be inadequate due to assumptions or approximations, making results unrealistic. Aiming to bridge this gap, this research develops an assessment framework that employs the FlexSim software for simulating the conventional, Flying-V and Fishbone designs based on a real case from a Philippine manufacturing company. Using a computer simulation, this research investigates factors not yet tractable with present analytical methods. The factors employed for the comparative assessment are “picking run-time”, “travel distance”, and “capacity”. The results suggest that the Fishbone design provides the most advantage compared to the Flying-V and other conventional designs. With the proposed Fishbone design, the company is expected to save, on average, 52.39% of picking run-time, 32.25% travel distance, and increase storage capacity by 7.5%. The research findings are compared to previous studies based on analytical approaches.

APA, Harvard, Vancouver, ISO, and other styles

37

Ali, Qutaiba. "Security Issues of Solar Energy Harvesting Road Side Unit (RSU)." Iraqi Journal for Electrical and Electronic Engineering 11, no. 1 (June 1, 2015): 18–31. http://dx.doi.org/10.37917/ijeee.11.1.3.

Full text

Abstract:

Vehicular network security had spanned and covered a wide range of security related issues. However solar energy harvesting Road Side Unit (RSU) security was not defined clearly, it is this aspect that is considered in this paper. In this work, we will suggest an RSU security model to protect it against different internal and external threats. The main goal is to protect RSU specific data (needed for its operation) as well as its functionality and accessibility. The suggested RSU security model must responds to many objectives, it should ensure that the administrative information exchanged is correct and undiscoverable (information authenticity and privacy), the source (e.g., VANET server) is who he claims to be (message integrity and source authentication) and the system is robust and available (using Intrusion Detection System (IDS)). In this paper, we suggest many techniques to strength RSU security and they were prototyped using an experimental model based on Ubicom IP2022 network processor development kit.

APA, Harvard, Vancouver, ISO, and other styles

38

I. Ali, Qutaiba. "Security Issues of Solar Energy Harvesting Road Side Unit (RSU)." Iraqi Journal for Electrical And Electronic Engineering 11, no. 1 (June 28, 2015): 18–31. http://dx.doi.org/10.33762/eeej.2015.102711.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Liang, Yunyi, Zhizhou Wu, and Jia Hu. "Road side unit location optimization for optimum link flow determination." Computer-Aided Civil and Infrastructure Engineering 35, no. 1 (August 29, 2019): 61–79. http://dx.doi.org/10.1111/mice.12490.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Soifer, Alexander. "Covering a square of side n+ε with unit squares." Journal of Combinatorial Theory, Series A 113, no. 2 (February 2006): 380–83. http://dx.doi.org/10.1016/j.jcta.2005.08.005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Gazizov, T. R., V. K. Salov, and S. P. Kuksenko. "Stable Delay of Microstrip Line with Side Grounded Conductors." Wireless Communications and Mobile Computing 2017 (2017): 1–5. http://dx.doi.org/10.1155/2017/1965739.

Full text

Abstract:

Characteristics of transmission lines are addressed. Wave impedance and per-unit-length delay of the microstrip structure with grounded side conductors on three layers are calculated under different parameters of the structure. A line which provides the desired value of wave impedance and constant per-unit-length delay, at the expense of correction of the gaps on different layers, is proposed.

APA, Harvard, Vancouver, ISO, and other styles

42

Elango, P., K. Kuppusamy, and N. Prabhu. "Data Replication Using Data Mining Techniques." Asian Journal of Computer Science and Technology 8, S1 (April 22, 2021): 107–9. http://dx.doi.org/10.51983/ajcst-2019.8.s1.1939.

Full text

Abstract:

Database Replication is the successive electronic duplicating of information from a database in one PC or server to a database in another with the goal that all clients share a similar dimension of data. The outcome is a conveyed database in which clients can get to information significant to their assignments without meddling with crafted by others. Anyway information replication is an entrancing theme for both hypothesis and practice. On the hypothetical side, numerous solid outcomes requirement what should be possible as far as consistency: e.g., the difficulty of achieving agreement in offbeat frameworks the blocking idea of CAP hypothesis, and the requirement for picking an appropriate rightness foundation among the numerous conceivable. On the pragmatic side, information replication assumes a key job in a wide scope of settings like storing, back-up, high accessibility, wide territory content dissemination, expanding versatility, parallel preparing, and so forth. Finding a replication arrangement that is reasonable in whatever number such settings as could reasonably be expected remains an open test.

APA, Harvard, Vancouver, ISO, and other styles

43

Hsieh, Heng-Hsing, Kathleen Hodnett, and Paul Van Rensburg. "Do Managers Of Global Equity Funds Outperform Their Respective Style Benchmarks? Evidence From South Africa." International Business & Economics Research Journal (IBER) 11, no. 3 (July 17, 2012): 269. http://dx.doi.org/10.19030/iber.v11i3.7157.

Full text

Abstract:

The results of our prior research on internationally-domiciled global equity funds suggest that active managers do not provide economic benefits, in addition to their underlying investment style benchmarks. This finding implies that the performances of global equity funds are derived mainly from the broad investment styles followed by the active managers rather than the stock-picking activities of the managers. We replicate our earlier research to investigate the performances of the six well-established global equity funds in the South African unit trust industry. Our results indicate that four out of the six South African fund managers under examination substantially underperform their passively-replicated style benchmarks. Our prior study results indicate that there is no significant difference between the performances of the internationally-domiciled global equity funds and their respective style benchmarks. By contrast, the stock-picking decisions of the South African fund managers are found to destroy value created by their respective style benchmarks in this study. Our findings suggest that investors who wish to follow particular investment styles would be better off by investing in exchange traded funds (ETF) that passively track the performances of their mandated investment styles in the global equity market with minimal costs.

APA, Harvard, Vancouver, ISO, and other styles

44

Park, Sang-Hun, Kenji Ogino, and Hisaya Sato. "Synthesis and characterization of photorefractive polymers with triphenylamine unit and NLO chromophore unit on a side chain." Polymers for Advanced Technologies 11, no. 7 (2000): 349–58. http://dx.doi.org/10.1002/1099-1581(200007)11:7<349::aid-pat978>3.0.co;2-z.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Rajiv Kumar, Kiranjeet Kaur Batth, Jaspreet Kaur, Jaspreet Kaur, Parminder Nain, and R. K. Dhawan. "A most convenient and patient compliance dosage form- Tablet." Journal of Biomedical and Pharmaceutical Research 9, no. 6 (December 17, 2020): 13–19. http://dx.doi.org/10.32553/jbpr.v9i6.815.

Full text

Abstract:

Tablet is defined as solid pharmaceutical dosage form containing drug substance generally with suitable diluents and prepared by either compression which is given as a single unit and are known as solid unit dosage form. Tablets remain popular as a dosage form because of the advantages afforded, both to the manufacturer (e.g. simplicity and economy of the preparation, stability, and convenience in packing, shipping and dispensing) and the patient. The excipients include diluents, Binders and adhesives, disintegrates, etc. Tablets vary in shape and differ greatly in size and weight depending on the amount of the medicinal substance. The ingredients must be granulated prior to compression to assure an even distribution of the active compound in the final tablet. There are two basic techniques which can be used to granulate powders for compressions into a tablet are wet granulation and dry granulation. In this review article tablet manufacturing and evaluation have been discussed. Keywords- Tablet, Granulation, Picking and sticking, Dissolution test, weight variation

APA, Harvard, Vancouver, ISO, and other styles

46

Wantah, Indah Helda, David P. E. Saerang, and Lidia Mawikere. "EVALUASI PENERAPAN AKUNTANSI PENERIMAAN DANA TRANSFER PADA BADAN PENGELOLA KEUANGAN DAN BARANG MILIK DAERAH PROVINSI SULAWESI UTARA." ACCOUNTABILITY 4, no. 1 (June 30, 2015): 115. http://dx.doi.org/10.32400/ja.8418.4.1.2015.115-122.

Full text

Abstract:

Each SKPD who has the task of picking and receiving local revenue collection and acceptance shall perform under the terms set out in the legislation. The purpose of this study was to determine the application of accounting receipt of funds transfer in Financial Management Board and Regional Property North Sulawesi Province. Accounting receipt of funds transfer includes a series of activities of receiving, recording, distribution and accountability in the management of money that is the Regional Finance Management Unit (SKPKD) and / or Unit (SKPD). The method used is descriptive qualitative. Based on this study, the obtained results that the Financial Management Board and Regional Property North Sulawesi receive funds transfers from the center, are recorded in the form of journal and distribution in accordance with applicable regulations, and accountability made in the financial statements. However, the Financial Management Board and Regional Property North Sulawesi need to improve the understanding of the technical terms for each employee.

APA, Harvard, Vancouver, ISO, and other styles

47

Ju, Hong-Taek, Kang-Min Ko, and Dong-Woo Kwon. "Development of WAVE Networking Service Protocol for RSU(Road-side Unit)." Journal of Korea Information and Communications Society 37, no. 5B (May 30, 2012): 395–404. http://dx.doi.org/10.7840/kics.2012.37b.5.395.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Christiansen, Richard L. "Gasflooding Experiments for the East Side of the Yates Field Unit." SPE Reservoir Engineering 5, no. 01 (February 1, 1990): 14–18. http://dx.doi.org/10.2118/16986-pa.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Nseir, Saad, Demosthenes Makris, Daniel Mathieu, Alain Durocher, and Charles-Hugo Marquette. "Intensive care unit-acquired infection as a side effect of sedation." Critical Care 14, no. 2 (2010): R30. http://dx.doi.org/10.1186/cc8907.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Hamdy, Mohamed, Mostafa Elshahed, Doaa Khalil, and Essam El-din Abo El-zahab. "Stochastic Unit Commitment Incorporating Demand Side Management and Optimal Storage Capacity." Iranian Journal of Science and Technology, Transactions of Electrical Engineering 43, S1 (October 3, 2018): 559–71. http://dx.doi.org/10.1007/s40998-018-0152-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'The side picking unit'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles