Relevant bibliographies by topics / Thermal stability of p-dichlorobenzene

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'Thermal stability of p-dichlorobenzene'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Thermal stability of p-dichlorobenzene.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Thermal stability of p-dichlorobenzene"

1

Wan, Ji Xian, Yan Fen Qin, Shao Bo Li, and Xiu Hua Wang. "Studies on Preparation and Characterization of Anti-Oxidizing Polyphenylene Sulfide." Advanced Materials Research 332-334 (September 2011): 1045–48. http://dx.doi.org/10.4028/www.scientific.net/amr.332-334.1045.

Full text
Abstract:
In this paper, polyphenylene sulfide（PPS） was synthesized through reactions of sodium sulfide and p-dichlorobenzene in N-methylpyrrolidone. Then antioxidant 4426, montmorillonite(MMT) were added into the PPS resin to improve its thermal oxidation stability. The polymer was characterized by FT-IR, Raman, and XRD analysis. Differential Scanning Calorimetry (DSC) was used to mensurate the oxidation induction temperature (dynamic OIT) of PPS, and Thermogravimetric analysis(TGA) was used to evaluate the thermal oxidation stability of PPS. The results showed that the addition of the antioxidant 4426
APA, Harvard, Vancouver, ISO, and other styles
2

Labrador, M., E. Tauler, Y. Haget, T. Calvet, M. A. Cuevas, and E. Estop. "Crystal data for p-bromochlorobenzene and p-dichlorobenzene/p-bromochlorobenzene mixed crystals at 293 K." Journal of Applied Crystallography 18, no. 6 (1985): 542. http://dx.doi.org/10.1107/s0021889885010883.

Full text
Abstract:
The powder data for p-bromochlorobenzene(pBCB) and p-dichlorobenzene/p-bromochlorobenzene mixed crystals [pDCB] x [pBCB]1 − x at 293 K are reported; their thermal stability at 293 K is given. Vertical diffractomer, graphite monochromator, Cu Kα, λ = 1.5405 Å. They are all isomorphous, monoclinic, P21/a with Z = 2. a = 15.134(4), b = 5.843(2), c = 4.073(1) Å, β = 112.53(1)°, V = 332.7 Å3, Dx = 1.911 Mg m−3 for pBCB. a = 14.890(5), b = 5.848(5), c = 4.046(2) Å, β = 112.53(2)°, V = 325.4 Å3, Dx = 1.636 Mg m−3 for [pDCB]0.70[pBCB]0.30. a = 15.004(6), b = 5.840(3), c = 4.059(2) Å, β = 112.48(2)°, V
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Yu-zhang, Yu-chuan Li, Ru-bo Zhang, Cheng-hui Sun, and Si-ping Pang. "Thermal stability of p-dimethylaminophenylpentazole." RSC Adv. 4, no. 101 (2014): 57629–34. http://dx.doi.org/10.1039/c4ra08454c.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Korcsmáros, G., P. Moravec, R. Grill, A. Musiienko, and K. Mašek. "Thermal stability of bulk p-CdTe." Journal of Alloys and Compounds 680 (September 2016): 8–13. http://dx.doi.org/10.1016/j.jallcom.2016.03.233.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Black, R. M., C. F. List, and R. J. Wells. "Thermal stability of p-phenylene sulphide polymers." Journal of Applied Chemistry 17, no. 10 (2007): 269–75. http://dx.doi.org/10.1002/jctb.5010171001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rehman, Shafi Ur, Sana Javaid, Muhammad Shahid, Badar Rashid, and Fawad Ahmad. "Polystyrene Novel Composites with Enhanced Thermal Stability and Improvised Conductivity." Materials Science Forum 1130 (October 31, 2024): 71–76. http://dx.doi.org/10.4028/p-xte9n3.

Full text
Abstract:
Polymers having thermal stability and thermal conductivity are taken as the hot cake in the market these days. Manufacturing industries are focusing over the functional polymers with thermal management in aviation, electronics and other heat sink applications. In this research, general purpose polystyrene (GPPS-550P) is melt extruded with modified boron nitride powder. The fabricated composite samples showed an increase of 67.43% in thermal conduction. An increase of 56 multiple also achieved in thermal stability of the newly developed composite. This might be a tangible addition to the indust
APA, Harvard, Vancouver, ISO, and other styles
7

Ogawa, Masahiro, Tsukasa Ehara, Toru Tamiya, and Takahide Tsuchiya. "Thermal stability of fish myosin." Comparative Biochemistry and Physiology Part B: Comparative Biochemistry 106, no. 3 (1993): 517–21. http://dx.doi.org/10.1016/0305-0491(93)90126-p.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Amelkovich, Yuliya, Olga Nazarenko, Puthenpurakalchira Maniyan Visakh, and Tatiyana Zadorozhnaya. "Study of Thermal Behavior of Epoxy Composites Filled with Different Natural Zeolites." Materials Science Forum 1065 (June 30, 2022): 23–33. http://dx.doi.org/10.4028/p-jhe993.

Full text
Abstract:
One of the ways to enhance thermal stability and reduce the flammability of polymers is the introduction of fillers with flame retardant properties. The paper studies the effect of natural zeolites of the Sakhaptinsk and Shivyrtuysk deposits on the thermal stability and flame retardancy of epoxy composites. The thermal stability of epoxy composites was characterized by thermogravimetric analysis in oxidizing (air) and inert (argon) atmospheres. The parameters of thermo-oxidative degradation and thermal degradation of the samples with a filler concentration of 0, 1, 5, and 10 wt% were studied.
APA, Harvard, Vancouver, ISO, and other styles
9

Zhu, Yong Sheng, Yin Qiu Sun, Xiao Tao Luo, and Chang Jiu Li. "Microstructural Stability of a Metallic Thermal Barrier Coatings for Rocket Engine." Materials Science Forum 1106 (December 5, 2023): 21–27. http://dx.doi.org/10.4028/p-8afo44.

Full text
Abstract:
Metallic thermal barrier coatings (TBCs) consisting of a bond coating and a top coating have been extensively utilized for protecting the walls of rocket combustion chambers. However, standard coating systems often encounter failures due to the significant differences in coating composition and thermal expansion coefficient compared to the substrate under high heat flux conditions. To protect liquid rocket combustion chamber walls, a novel metallic multilayer TBC system applied with atmospheric plasma spraying is developed in the present work. It attempted to deposit dense Ni-based alloy and C
APA, Harvard, Vancouver, ISO, and other styles
10

Liu, Shu Yi, Quan Wang, and Zheng Huan Wu. "MDNs/FGNs/IFR Synergistic Flame Retardant for Epoxy Resin the Influence of Thermal Degradation Kinetics." Engineering Innovations 12 (January 3, 2025): 1–5. https://doi.org/10.4028/p-8aqyr1.

Full text
Abstract:
The thermal degradation process of layered molybdenum disulfide nanosheets/flake graphite nanosheets/expanded flame retardants/epoxy resins (MDNs/FGNs/IFR/EP) was analyzed using thermogravimetric analysis. The effect of binary nanolayered molybdenum disulfide/flake graphite nanosheets as enhancing flame retardants on thermal stability was studied. The thermal degradation kinetics activation energy of MDNs/FGNs/IFR/EP was calculated using the Coats Redfern method. The mechanism function of MDNs/FGNs/IFR/EP was determined using the Phadnis method, and the thermal degradation mechanism of MDNs/FG
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Thermal stability of p-dichlorobenzene"

1

Kang, Chi-Yun, and 康濟雲. "Thermal Stability, Microstructure and Mechanical Properties of Ternary Ni-P-Al Coating." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/48972925184699049869.

Full text
Abstract:
碩士<br>國立清華大學<br>材料科學工程學系<br>95<br>The ternary Ni–P–Al alloy coatings were fabricated by RF magnetron sputtering technique with dual targets of Ni–P/Cu as well as an additional aluminum metal. Electroplating Ni–P process was introduced to obtain the NiP compound target with various phosphorous contents after modification of the processing parameters. Thermal analysis revealed that the introduction of Al in the Ni-P coating by co-deposition retarded the Ni and Ni3P precipitation and retained the strengthening effect at elevated temperature. Microstructure evolution indicated that all coatings in
APA, Harvard, Vancouver, ISO, and other styles
2

Lo, Yuan Heng, and 羅元亨. "Study of Optoelectric Properties and Thermal Stability of p-GaN/AgPt, p-GaN/AgRu, and p-GaN/AgRh Reflective Ohmic Contact." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/28525157028628000097.

Full text
Abstract:
碩士<br>國立清華大學<br>材料科學工程學系<br>104<br>In this study, all the samples AgPt(6 at%), AgPt(4 at%), AgPt(2 at%), Pt(2 nm)/Ag(150 nm), AgRh(2 at%) and AgRu(2 at%) were deposited on the p-GaN by dual E-gun evaporation system. The samples were annealed at 500℃ by two different annealing conditions, furnace annealing(FA) in air ambient for 10 min, and rapid thermal annealing(RTA) in air ambient for 1 min. Thermal stability test were performed by annealing at 400℃in air ambient for 60 min. Optoelectricproperties and thermal stability of p-GaN/AgPt, p-GaN/AgRu and p-GaN/AgRh reflective ohmic contacts were i
APA, Harvard, Vancouver, ISO, and other styles
3

Shih, Sheng-Lih, and 時聖立. "Study of Optoelectric Properties and Thermal Stability of p-GaN/AgPd and p-GaN/AgIn Reflective Ohmic Contacts." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/66776308142827429072.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

CHANG, PAO-HSIN, and 張寶鑫. "Study of Optoelectric Properties and Thermal Stability of p-GaN/AgSb and p-GaN/AgMn Reflective Ohmic Contacts." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/73909929432209798269.

Full text
Abstract:
碩士<br>國立清華大學<br>材料科學工程學系<br>104<br>In this study, all the samples AgSb(6 at%), AgSb(2 at%), Ag(150 nm)/Sb(4 nm), AgMn(6 at%), AgMn(4 at%), and Ag(150 nm)/Mn(2 nm) were deposited on the p-GaN by dual E-gun evaporation system. The samples were annealed at 500℃ by three different annealing conditions, furnace annealing(FA) in air ambient for 10 min, rapid thermal annealing(RTA) in O2 ambient for 1 min, and rapid thermal annealing(RTA) in air ambient for 1 min. Thermal stability test were performed by annealing at 400℃in air ambient for 60 min. Optoelectricproperties and thermal stability of p-Ga
APA, Harvard, Vancouver, ISO, and other styles
5

Lin, Wei Hao, and 林威浩. "Study of Optoelectric Properties and Thermal Stability of p-GaN/AgSn and p-GaN/AgCu Reflective Ohmic Contacts." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/94939597909791543646.

Full text
Abstract:
碩士<br>國立清華大學<br>材料科學工程學系<br>104<br>This thesis study about optoelectric properties and thermal stability of p-GaN reflective ohmic contacts Sn (2nm) / Ag (150nm), AgSn (2 at%), AgCu (4 at%) and AgCu (8 at%) four specimens which are prepared by due electron guns evaporation and AgCu (T.E.) prepared by thermal evaporation plus a AgCu(S.E.) prepared by single electron gun evaporation six specimens in total. We discuss the effect, including light reflectivity, sheet resistance of the metal thin film, specific contact resistance and thermal stability, on the optoelectric properties of AgSn and AgCu
APA, Harvard, Vancouver, ISO, and other styles
6

Chen, Chien, and 陳謙. "Study of Optoelectric Properties and Thermal Stability of p-GaN/AgTi, p-GaN/AgCo, and p-GaN/AgNi Optical Reflective Ohmic Contact." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/23023888333113170650.

Full text
Abstract:
碩士<br>國立清華大學<br>材料科學工程學系<br>104<br>This thesis study about optoelectric properties and thermal stability of p-GaN reflective ohmic contacts Ti (2nm) / Ag (150nm), AgTi (2 at%), AgTi (4 at%), Co(2nm) / Ag (150nm), AgCo (2 at%), AgCo(5 at%) and AgNi(2 at%) seven specimens which are prepared by due electron guns evaporation.We discuss the effect, including light reflectivity, sheet resistance of the metal thin film, specific contact resistance and thermal stability, on the optoelectric properties of AgTi, AgCo and AgNi alloy reflective ohmic contacts, be influenced by different alloy composition
APA, Harvard, Vancouver, ISO, and other styles
7

Tien, Shih-Kang, and 田世綱. "Microstructure, Thermal Stability, and Mechanical Properties of Ni-P-WAlloy Coating Fabricated by Electroless Process." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/09376566325854268737.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hsieh, Hsin-hung, and 謝欣宏. "A study of thermal stability and electromaganetic shielding behaviour of polyaniline-p-toluene sufonic acid/montmorillonite nanocomposites." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/17587472537111528158.

Full text
Abstract:
碩士<br>雲林科技大學<br>環境與安全工程系碩士班<br>98<br>Intrinsically conductive polymer-Polyaniline had high conductivity and many other properties, such as environmental stability and rather simple synthesis. In addition, dopes with organic acids could enhance its processing, so its had wide range of applications, such as solar cells, antistatic and electromagnetic interference shielding, etc... In this study, the organic amine 1-Dodecylamine (DOA) modification of sodium montmorillonite (NA+-MMT）, and conducting polymer / layered silicate salt nanocomposites (PANI-PTSA/DOA-MMT) have been preparationed by dopin
APA, Harvard, Vancouver, ISO, and other styles
9

鄭義冠. "Studies of Kinetic Mechanisms and Thermal Stability of Electroless Deposited Cu / Co(W)-P Thin-Film Metallization System." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/56078459292441058055.

Full text
Abstract:
碩士<br>國立海洋大學<br>材料工程研究所<br>89<br>Traditional IC fabrication , aluminum usually used to deposition the metal line. But When metal line developing to 0.25μm、0.18μm. Traditional PVD-Al already can’t conform IC fabrication requirement. Copper has higher melting point and lower specific resistanc than aluminum, So copper can availably to prevent RC delay and increase electro migration competency. Now copper line fabrication usually use electroplating. This article discussion use electroless plating method to deposition metal line and diffusion barrier thin film. We wish use the advantage of electro
APA, Harvard, Vancouver, ISO, and other styles
10

Chou, Yi-Lun, and 周以倫. "Design of high brightness GaN-based LEDs and investigation of thermal stability for the metal contacts on the p-type GaN." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/26816090577126526338.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Thermal stability of p-dichlorobenzene"

1

Guenthner, Andrew J., Michael E. Wright, Brian J. Petteys, Jessica J. Cash, and Gregory R. Yandek. "New Cyanate Ester and Poly(p-phenylene) Resins with Low-Moisture Absorption and Improved Thermal Stability." In ACS Symposium Series. American Chemical Society, 2009. http://dx.doi.org/10.1021/bk-2009-1004.ch017.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Auret, F. D., A. G. M. Das, C. Nyamhere, M. Hayes, and N. G. van der Berg. "Thermal Stability of Ti/Mo Schottky Contacts on p-Si and Defects Introduced in p-Si during Electron Beam Deposition of Ti/Mo." In Solid State Phenomena. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/3-908451-13-2.561.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tien, Shih Kang, Fan Bean Wu, and Jenq Gong Duh. "The Effect of Tungsten Addition on the Thermal Stability and Microstructure in the Electroless Ni-P-W Composite Coating." In Key Engineering Materials. Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-997-0.83.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kulkarni, Amit S., Shrish Rane, and Gregory Beaucage. "Poly(p-xylylene)." In Polymer Data Handbook. Oxford University PressNew York, NY, 2009. http://dx.doi.org/10.1093/oso/9780195181012.003.0207.

Full text
Abstract:
Abstract Major Applications Films and coatings on electronic components; insulating applications. Special Properties High thermal stability; excellent dielectric and barrier properties; high resistance to electronic irradiation, solvent resistance, high degree of crystallinity.(1,2)
APA, Harvard, Vancouver, ISO, and other styles
5

Tao, J., Y. Ni, C. Lu, J. Chen, and Z. Xu. "Synthesis and thermal stability of Sm(p-FBA) Phen Luminescent complex." In Frontiers of Energy and Environmental Engineering. CRC Press, 2012. http://dx.doi.org/10.1201/b13718-96.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hira, U. "Other New Thermoelectric Compounds." In Thermoelectric Polymers. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903018-7.

Full text
Abstract:
Thermoelectric (TE) compounds have made contributions to solving the energy crisis problem of the globe by providing various sustainable energy solutions. TE materials can transform waste heat of thermal power plants, automobiles, incinerators and domestic cooking stoves into electricity production. TE gadgets consist of n &amp; p-type semiconductors in which temperature changes on the two different sites cause the flow of charges i.e., electrons and holes which produce voltage difference through Seebeck effect. Conventional metal alloys, half-Heuslar, Skutterudite compounds and metal oxides (
APA, Harvard, Vancouver, ISO, and other styles
7

Keppert, Martin, Vojtěch Pommer, Jitka Krejsová, et al. "Mechanical Properties of Acid Activated Metakaolin." In Advances in Transdisciplinary Engineering. IOS Press, 2024. http://dx.doi.org/10.3233/atde240529.

Full text
Abstract:
Acid (usually by phosphoric acid) activation of aluminosilicate precursors provides a new group of inorganic materials with promising chemical and thermal stability. The three mixtures in system metakaolin – phosphoric acid were prepared; they differed in Al/P molar ratio (1, 1.5, 2). Compressive and bending strength were determined in the age of 1 week; the 1 day 60 °C curing was applied. The highest compressive strength reached sample with Al/P ratio 1.5, what falls within the range found in literature. The porosity of the samples increased with the increasing Al/P ratio, thus there was not
APA, Harvard, Vancouver, ISO, and other styles
8

Budurov, S., V. Fotty, and S. Toncheva. "The glass-forming region in the Ni–P system and thermal stability of the glasses obtained." In Rapidly Quenched Materials. Elsevier, 1991. http://dx.doi.org/10.1016/b978-0-444-89107-5.50110-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

González-Peña, V., C. Márquez-Alvarez, E. Sastre, and J. Pérez-Pariente. "06-P-23 - Improved thermal stability of mesoporous alumina support of catalysts for the isomerization of light paraffins." In Studies in Surface Science and Catalysis. Elsevier, 2001. http://dx.doi.org/10.1016/s0167-2991(01)81400-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Eftink, Maurice R., and Glen D. Ramsay. "Temperature- and Pressure-Induced Unfolding of a Mutant of Staphylococcal Nuclease A." In High Pressure Effects in Molecular Biophysics and Enzymology. Oxford University Press, 1996. http://dx.doi.org/10.1093/oso/9780195097221.003.0008.

Full text
Abstract:
Nuclease conA is a hybrid version of Staphylococcal nuclease that contains a six amino acid (β-turn substitute from concanavalin A. This hybrid protein has a much lower thermodynamic stability than does the wild-type protein. This enables the unfolding of the protein to be achieved easily by several types of perturbations. From temperature-, pressure-, and denaturant-induced unfolding studies, we have found the free energy change for unfolding, ΔG°un, to be approximately 1.4 kcal mo−1 at pH 7, 0.1 M NaCI, and 20 °C, as compared to a thermodynamic stability of approximately 5.5–6 kcal mo−1 for
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Thermal stability of p-dichlorobenzene"

1

Xu, Miao, Guang Qu, and Limin Sun. "Reconstruction of the bridge end displacement via nonlinear model accounting thermal correlation." In IABSE Symposium, Tokyo 2025: Environmentally Friendly Technologies and Structures: Focusing on Sustainable Approaches. International Association for Bridge and Structural Engineering (IABSE), 2025. https://doi.org/10.2749/tokyo.2025.0753.

Full text
Abstract:
&lt;p&gt;By establishing a digital model based on input temperature monitoring data and output temperature-induced deflections, crucial reference values for the temperature displacement of cable-stayed bridge main girders can be obtained, essential for bridge management and maintenance. However, a strong high-order nonlinearity exists in the correlation between temperature features and temperature-induced beam end displacements. Therefore, a digital regression model based on LSTM-Transformer is proposed, which incorporates thermal correlations through optimization algorithms during model train
APA, Harvard, Vancouver, ISO, and other styles
2

Farhan, Muhammad, Zia Ud Din, Mohsin Ali Marwat, Yumna Sohail, Mubashra Khan, and Huma Ramzan. "Improving the thermal stability and electrical properties of P (VDF-HFP)/PVDF blend by incorporating novel surface-decorated BaTiO3@GNPs nanoparticles for dielectric applications." In 2024 4th International Conference on Digital Futures and Transformative Technologies (ICoDT2). IEEE, 2024. http://dx.doi.org/10.1109/icodt262145.2024.10740253.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sabadash, Vira, Oleh Konovalov, Anna Nowik-Zajac, and Iwona Zawierucha. "Adsorption Properties of Natural and Synthetic Zeolites for Ammonium and Phosphate Removal from Wastewater." In 8th International Congress "Environment Protection. Energy Saving. Sustainable Environmental Management". Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-p0hfsd.

Full text
Abstract:
Water resources are crucial in any region's overall natural resource complex. This research focuses on addressing these pollution issues through water treatment processes. The primary objective of this study was to examine the adsorption of phosphates using both natural and synthetic adsorbents, particularly aluminosilicates. Under static and dynamic conditions, the research assessed the sorption characteristics of natural zeolite, specifically clinoptilolite obtained from the Sokyrnytsia mineral deposits. Results indicated that the adsorption of phosphates is more effective in acidic environm
APA, Harvard, Vancouver, ISO, and other styles
4

Pathak, S. S., and A. S. Khanna. "Corrosion Resistance Waterborne Sol-gel Coatings Using Conventional Polyester Resin and Epoxy Modified Silane for Aluminum and Magnesium." In Paint and Coatings Expo (PACE) 2008. SSPC, 2008. https://doi.org/10.5006/s2008-00031.

Full text
Abstract:
Abstract Sol-gel coatings offer excellent properties such as scratch resistance, barrier properties, outdoor stability and high thermal stability. However, the precursors (silanes) used for these coatings are very expensive and require special care for handling and application on substrate. One approach to solve this problem is the incorporation of conventional organic polymer as the organic modifying component in silane coating formulation. Incorporation of organic polymer will reduce the cost and will make sol-gel coatings readily acceptable in industry. The aim of the present work is to pre
APA, Harvard, Vancouver, ISO, and other styles
5

McIlwain, Sam, Bruce Hamersley, William Wu, and Tian Wang. "Viaduct Solutions for Unstable Slopes in the Kicking Horse Canyon." In IABSE Congress, San José 2024: Beyond Structural Engineering in a Changing World. International Association for Bridge and Structural Engineering (IABSE), 2024. https://doi.org/10.2749/sanjose.2024.0533.

Full text
Abstract:
&lt;p&gt;This paper presents an innovative viaduct solution using accelerated bridge construction techniques crossing a series of unstable slopes, active landslides, and avalanche and rock fall paths along a treacherous highway section of the Kicking Horse Canyon Phase 4 project in British Columbia, Canada. The utilization of compact precast concrete components significantly minimized on-site labour requirements, improved the constructability, and reduced the construction schedule and cost. Approximately 1.8 km of viaduct structures were designed to span the unstable soils. Significant loads f
APA, Harvard, Vancouver, ISO, and other styles
6

Kussner, B., G. Eberle, W. Eisenmenger, and S. N. Fedosov. "Thermal stability of polarization in P(VDF-TFE) copolymer films." In 9th International Symposium on Electrets (ISE 9) Proceedings. IEEE, 1996. http://dx.doi.org/10.1109/ise.1996.578224.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Tillie, L., B. Dieny, R. C. Sousa, et al. "P-STT-MRAM thermal stability and modeling of its temperature dependence." In 2018 International Symposium on VLSI Technology, Systems and Application (VLSI-TSA). IEEE, 2018. http://dx.doi.org/10.1109/vlsi-tsa.2018.8403857.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Egnatosyan, Siranush, Maria Badalyan, and Naira Egnatosyan. "Thermal Technical Requirements for Wall Materials and Analysis of Thermal Stability of Enclosing Structures under Non-Stationary Heat Flow." In International Conference on Structural Engineering and Materials. Trans Tech Publications Ltd, 2023. http://dx.doi.org/10.4028/p-z696zz.

Full text
Abstract:
The article is devoted to the problem of reducing energy consumption in the production of building materials and the operation of buildings by replacing the traditional wall material with more efficient material such as lightweight concrete based on the porous filler of glass granulate (foamed glass granulate concrete) and mineral wool mats, as well as the analysis of the thermal stability of enclosing structures with non-stationary heat flow. Much attention is paid not only to the energy efficiency of systems providing microclimate but also to the efficiency of capital construction, since the
APA, Harvard, Vancouver, ISO, and other styles
9

Ong, Y. C., D. S. Ang, S. J. O'Shea та ін. "Thermal Stability of High-κ Dielectrics - A Nanocharacterization Perspective". У 2008 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2008. http://dx.doi.org/10.7567/ssdm.2008.p-1-17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Liao, Hsiu-Hsien, Yi-Ju Chen, and Bing-Yue Tsui. "Thermal Stability of Shallow Ge N+-P Junction with Thin GeSn Top Layer." In 2019 International Symposium on VLSI Technology, Systems and Application (VLSI-TSA). IEEE, 2019. http://dx.doi.org/10.1109/vlsi-tsa.2019.8804654.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Thermal stability of p-dichlorobenzene"

1

Phisalaphong, Muenduen. Development and characterization of activated carbon derived from bacterial cellulose (Year 2). Faculty of Engineering, Chulalongkorn University, 2018. https://doi.org/10.58837/chula.res.2018.82.

Full text
Abstract:
Bacterial cellulose (BC) was investigated as a novel material for preparing activated carbons. BC was dried by heating and it was carbonized with a chemical activation process using phosphoric acid (H₃PO₄) as an activating agent at different temperatures (400, 500 and 600 °C). The properties of the activated carbons were characterized such as chemical property, structure, pore size, thermal property by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), N₂ -physisorption (BET), scanning electron microscopy (SEM) , thermal gravimetric (TGA). The obtained BC activated carbo
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Thermal stability of p-dichlorobenzene' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography