Books on the topic 'Thermal streams'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 books for your research on the topic 'Thermal streams.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse books on a wide variety of disciplines and organise your bibliography correctly.
M, Brosten Tordis, Montana. Dept. of Health and Environmental Sciences, and Geological Survey (U.S.), eds. Supplemental arsenic data for selected streams in the Missouri River basin, Montana, 1987. Dept. of the Interior, U.S. Geological Survey, 1987.
Find full textAmerican Society of Heating, Refrigerating and Air-Conditioning Engineers. and American National Standards Institute, eds. Method of testing thermal energy meters for liquid streams in HVAC systems. American Society of Heating, Refrigerating and Air-Conditioning Engineers, 2006.
Find full text(Washington, D. C. ). National Center for Environmental Assessment. Best practices for continuous monitoring of temperature and flow in wadeable streams. National Center for Environmental Assessment, Office of Research and Development, U.S. Environmental Protection Agency, Washington, DC, 2014.
Find full textB, Hetnarski Richard, and Tanigawa Yoshinobu, eds. Thermal stresses. 2nd ed. Taylor & Francis, 2003.
Find full textZhu, Dongming. Influence of high cycle thermal loads on thermal fatigue behavior of thick thermal barrier coatings. National Aeronautics and Space Administration, 1997.
Find full text1947-, Miller Robert A., and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Influence of high cycle thermal loads on thermal fatigue behavior of thick thermal barrier coatings. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Inforamtion Program, 1997.
Find full textTracey, Karen L. Objective analysis of the Gulf Stream thermal front : methods and accuracy. University of Rhode Island, Graduate School of Oceanography, 1987.
Find full textJan, Składzień. Thermal analysis of the convective three-stream and three-fluid heat exchangers. Zakład Narodowy im. Ossolinśkich, 1989.
Find full textTheurer, Fred D. Instream water temperature model. Western Energy and Land Use Team, Division of Biological Services, Research and Development, Fish and Wildlife Service, U.S. Dept. of the Interior, 1985.
Find full textGeological Survey (U.S.), ed. MacHÓ: A computer interface to calculate the thermodynamic and transport properties of pure water. U.S. Dept. of the Interior, U.S. Geological Survey, 1991.
Find full textGeological Survey (U.S.), ed. MacHO□: A computer interface to calculate the thermodynamic and transport properties of pure water. U.S. Dept. of the Interior, U.S. Geological Survey, 1991.
Find full textGeological Survey (U.S.), ed. MacHb2sO: A computer interface to calculate the thermodynamic and transport properties of pure water. U.S. Dept. of the Interior, U.S. Geological Survey, 1991.
Find full textSchütze, Michael. Corrosion behaviour of oxide layers under thermal, chemical, and mechanical stresses. Wiley, 1997.
Find full textNew York State Energy Research and Development Authority. and Dynatech Scientific Inc, eds. Methane from partially digested sewage sludge using a stream injection rapid thermal reactor: Final report. The Authority, 1989.
Find full text1935-, Aboudi Jacob, Arnold S. M, and NASA Glenn Research Center, eds. The effect of interface roughness and oxide film thickness on the inelastic response of thermal barrier coatings to thermal cycling. National Aeronautics and Space Administration, Glenn Research Center, 1999.
Find full textJ, Petrus G., Krauss T. M, and United States. National Aeronautics and Space Administration., eds. Modeling of thermal barrier coatings: Final report. National Aeronautics and Space Administration, 1992.
Find full textDomb, Moshe Mario. Analysis of thermal residual stresses during processing of fibre-reinforced thermoplastic composites. University of Toronto, Graduate Dept. of Aerospace Science and Engineering, 1995.
Find full textMcManus, Hugh L. N., 1958- and United States. National Aeronautics and Space Administration., eds. Thermally induced damage in composite space structure: Predictive methodology and experimental correlation. National Aeronautics and Space Administration, 1994.
Find full textUnited States. National Aeronautics and Space Administration., ed. Microcracking in composite laminates under thermal and mechanical loading. National Aeronautics and Space Administration, 1995.
Find full textF, Erdogan, and United States. National Aeronautics and Space Administration., eds. Cracking of coated materials under transient thermal stresses. National Aeronautics and Space Administration, 1988.
Find full textKo, William L. Thermal behavior of a titanium honeycomb-core sandwich panel. NASA Ames Resarch Center, Dryden Flight Research Facility, 1991.
Find full textH, Jackson Raymond, and Dryden Flight Research Facility, eds. Thermal behavior of a titanium honeycomb-core sandwich panel. NASA Ames Resarch Center, Dryden Flight Research Facility, 1991.
Find full textBednarz, Piotr. Finite element simulation of stress evolution in thermal barrier coating systems. Forschungszentrum Jülich GmbH, Zentralbibliothek, 2007.
Find full textUnited States. National Aeronautics and Space Administration., ed. Advanced development of the boundary element method for elastic and inelastic thermal stress analysis. National Aeronautics and Space Administration, 1991.
Find full textF, Brausch J., Majjigi R. K, Lewis Research Center, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch., eds. Free jet feasibility study of a thermal acoustic shield concept for AST/VCE application: Dual stream nozzles. National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1985.
Find full textCross, John R. SCBUCKLE users manual: Buckling analysis program for simply supported and clamped panels. National Aeronautics and Space Administration, Langley Research Center, 1993.
Find full textF, Erdogan, and United States. National Aeronautics and Space Administration., eds. Cracking of a layered medium on an elastic foundation under thermal shock. National Aeronautics and Space Administration, 1988.
Find full text1929-, Springenschmid R., and RILEM Technical Committee 119, Avoidance of Thermal Cracking in Concrete at EArly Ages., eds. Prevention of thermal cracking in concrete at early ages: State-of-the-art report prepared by RILEM Technical Committee 119, Avoidance of Thermal Cracking in Concrete at Early Ages. E & FN Spon, 1998.
Find full textV, Frolov K., and Hetnarski Richard B, eds. Thermal stresses and strength of turbines: Calculation and design. 2nd ed. Hemisphere Pub. Corp., 1991.
Find full textScott, Elaine P. Development of methodologies for the estimation of thermal properties associated with aerospace vehicles: NASA grant no. NAG-1-1507, May 1, 1993 - March 31, 1966 : a final report. National Aeronautics and Space Administration, 1996.
Find full textBirman, V. Micromechanics of composites with shape memory alloy fibers in uniform thermal fields. National Aeronautics and Space Administration, 1995.
Find full textD, Holland Anne, and Langley Research Center, eds. Thermal/structural analysis of the shaft disk region of a fan drive system. National Aeronautics and Space Administration, Langley Research Center, 1990.
Find full textGregory, Peyton B. Thermal/structural analysis of the shaft disk region of a fan drive system. National Aeronautics and Space Administration, Langley Research Center, 1990.
Find full textV, Raj Sai, and NASA Glenn Research Center, eds. Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system. National Aeronautics and Space Administration, Glenn Research Center, 2002.
Find full textGhosn, Louis J. Residual stresses in thermal barrier coatings for a Cu-8Cr-4Nb substrate system. National Aeronautics and Space Administration, Glenn Research Center, 2002.
Find full textE, Melis Matthew, and United States. National Aeronautics and Space Administration., eds. A high heat flux experiment for verification of thermostructural analysis. NASA, 1988.
Find full textPapadopoulos, Demetrios S. Use of unbalanced laminates as a screening method for microcracking. NASA, 1990.
Find full textAbdul-Aziz, Ali. Influence of cooling hole geometry and material conductivity on the thermal response of cooled silicon nitride plate. National Aeronautics and Space Administration, Glenn Research Center, 2002.
Find full textCenter, Langley Research, ed. Micromechanics analysis of space simulated thermal deformations and stresses in continuous fiber reinforced composites. National Aeronautics and Space Administration, Langley Research Center, 1990.
Find full textGill, M. TP-H1148 knitline integrity evaluation: Final report. Thiokol Corp., Space Operations, 1990.
Find full textUnited States. National Aeronautics and Space Administration., ed. Compendium of mechanical limit-states. National Aeronautics and Space Administration, 1996.
Find full textGill, M. TP-H1148 knitline integrity evaluation: Final report. Thiokol Corp., Space Operations, 1990.
Find full textU.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering., ed. U.S. operating experience with thermally treated Alloy 600 steam generator tubes. Division of Engineering, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 2003.
Find full textU.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering., ed. U.S. operating experience with thermally treated Alloy 600 steam generator tubes. Division of Engineering, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 2003.
Find full textU.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering., ed. U.S. operating experience with thermally treated Alloy 600 steam generator tubes. Division of Engineering, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 2003.
Find full textU.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering, ed. U.S. operating experience with thermally treated Alloy 600 steam generator tubes. Division of Engineering, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 2003.
Find full textU.S. Nuclear Regulatory Commission. Office of Nuclear Reactor Regulation. Division of Engineering., ed. U.S. operating experience with thermally treated Alloy 600 steam generator tubes. Division of Engineering, Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission, 2003.
Find full textAbdul-Aziz, Ali. Design evaluation using finite element analysis of cooled silicon nitride plates for a turbine blade application. National Aeronautics and Space Administration, Glenn Research Center, 2001.
Find full textAbdul-Aziz, Ali. Design evaluation using finite element analysis of cooled silicon nitride plates for a turbine blade application. National Aeronautics and Space Administration, Glenn Research Center, 2001.
Find full text