Log in

Relevant bibliographies by topics / Thermally

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Thermally'

Author: Grafiati

Published: 4 June 2021

Last updated: 18 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Thermally.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Thermally"

1

Sun, Zhan, Huitao Yu, Yiyu Feng, and Wei Feng. "Application and Development of Smart Thermally Conductive Fiber Materials." Nanomaterials 14, no. 2 (2024): 154. http://dx.doi.org/10.3390/nano14020154.

Full text

Abstract:

In recent years, with the rapid advancement in various high-tech technologies, efficient heat dissipation has become a key issue restricting the further development of high-power-density electronic devices and components. Concurrently, the demand for thermal comfort has increased; making effective personal thermal management a current research hotspot. There is a growing demand for thermally conductive materials that are diversified and specific. Therefore, smart thermally conductive fiber materials characterized by their high thermal conductivity and smart response properties have gained increasing attention. This review provides a comprehensive overview of emerging materials and approaches in the development of smart thermally conductive fiber materials. It categorizes them into composite thermally conductive fibers filled with high thermal conductivity fillers, electrically heated thermally conductive fiber materials, thermally radiative thermally conductive fiber materials, and phase change thermally conductive fiber materials. Finally, the challenges and opportunities faced by smart thermally conductive fiber materials are discussed and prospects for their future development are presented.

APA, Harvard, Vancouver, ISO, and other styles

2

Imhof, R. E., F. R. Thornley, J. R. Gilchrist, and D. J. S. Birch. "Opto-thermal study of thermally insulating films on thermally conducting substrates." Journal of Physics D: Applied Physics 19, no. 10 (1986): 1829–41. http://dx.doi.org/10.1088/0022-3727/19/10/007.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Guidotti, Ronald A., and Patrick J. Masset. "Thermally activated (“thermal”) battery technology." Journal of Power Sources 183, no. 1 (2008): 388–98. http://dx.doi.org/10.1016/j.jpowsour.2008.04.090.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Guidotti, Ronald A., and Patrick Masset. "Thermally activated (“thermal”) battery technology." Journal of Power Sources 161, no. 2 (2006): 1443–49. http://dx.doi.org/10.1016/j.jpowsour.2006.06.013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Park, Yonggun, Yeonjung Han, Yong-Seok Choi, et al. "Correlation analysis between mass loss of wood due to thermal modification and equilibrium moisture content of thermally modified wood." BioResources 19, no. 1 (2024): 1283–94. http://dx.doi.org/10.15376/biores.19.1.1283-1294.

Full text

Abstract:

This study was conducted to determine the correlation between the mass loss (ML) of wood due to thermal modification and the equilibrium moisture content (EMC) of thermally modified wood. After thermal modification of larch lumber under various temperature and time conditions, ML according to treatment temperature and time was measured, and the (EMC) of the thermally modified wood was evaluated for each treatment condition. As the treatment temperature increased and the treatment time became longer, the ML of wood due to thermal modification increased. In addition, as the treatment temperature increased, the difference in EMC between the non-treated wood and the thermally modified wood tended to increase. Finally, a robust logarithmic correlation was observed between the ML due to thermal modification and the EMC of the thermally modified wood. These results suggest that the EMC of thermally modified wood can be predicted by simply measuring the weight of wood before and after thermal modification.

APA, Harvard, Vancouver, ISO, and other styles

6

Cook, W. D., T. F. Scott, S. Quay-Thevenon, and J. S. Forsythe. "Dynamic mechanical thermal analysis of thermally stable and thermally reactive network polymers." Journal of Applied Polymer Science 93, no. 3 (2004): 1348–59. http://dx.doi.org/10.1002/app.20569.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Akpan, Dianabasi, Sunday Ekpo, Christopher Effiong, and Mfoniso Aka. "THERMALLY-OPTICALLY-THERMALLY STIMULATED LUMINESCENCE." IJRDO-Journal of Applied Science 9, no. 6 (2023): 1–10. http://dx.doi.org/10.53555/as.v9i6.4773.

Full text

Abstract:

A three-stage energy band model was studied. The model consists of electrons thermally stimulated from the ground state to the first excited state, after which they were optically stimulated into the second excited state and they were finally stimulated thermally into the conduction band. A set of simultaneous differential equations was generated from the models and three assumed conditions were applied to this model, which they were solved analytically and analytical expressions were obtained. The same set of simultaneous equations were solved numerically using ode 15s MATLAB solver. When considering first-order peaks, the kinetic parameters obtained were found to be in good agreement with the analytical expressions. But when considering non first-order peaks, the kinetic parameters obtained numerically were not in good agreement with the analytical expressions and explanations had been given. Second-order peaks could not be obtained despite careful selection of the kinetic parameters because the traps were quickly saturated and the quasi- equilibrium conditions assumed could no longer be satisfied. The stability of the excited TA-OSL signals produced by the model was also studied. The real stability of the excited TA-OSL signals produced by this model was found to be about 46 million years.

APA, Harvard, Vancouver, ISO, and other styles

8

Ruan, Kunpeng, Yongqiang Guo, Chuyao Lu, et al. "Significant Reduction of Interfacial Thermal Resistance and Phonon Scattering in Graphene/Polyimide Thermally Conductive Composite Films for Thermal Management." Research 2021 (February 23, 2021): 1–13. http://dx.doi.org/10.34133/2021/8438614.

Full text

Abstract:

The developing flexible electronic equipment are greatly affected by the rapid accumulation of heat, which is urgent to be solved by thermally conductive polymer composite films. However, the interfacial thermal resistance (ITR) and the phonon scattering at the interfaces are the main bottlenecks limiting the rapid and efficient improvement of thermal conductivity coefficients (λ) of the polymer composite films. Moreover, few researches were focused on characterizing ITR and phonon scattering in thermally conductive polymer composite films. In this paper, graphene oxide (GO) was aminated (NH2-GO) and reduced (NH2-rGO), then NH2-rGO/polyimide (NH2-rGO/PI) thermally conductive composite films were fabricated. Raman spectroscopy was utilized to innovatively characterize phonon scattering and ITR at the interfaces in NH2-rGO/PI thermally conductive composite films, revealing the interfacial thermal conduction mechanism, proving that the amination optimized the interfaces between NH2-rGO and PI, reduced phonon scattering and ITR, and ultimately improved the interfacial thermal conduction. The in-plane λ (λ∥) and through-plane λ (λ⊥) of 15 wt% NH2-rGO/PI thermally conductive composite films at room temperature were, respectively, 7.13 W/mK and 0.74 W/mK, 8.2 times λ∥ (0.87 W/mK) and 3.5 times λ⊥ (0.21 W/mK) of pure PI film, also significantly higher than λ∥ (5.50 W/mK) and λ⊥ (0.62 W/mK) of 15 wt% rGO/PI thermally conductive composite films. Calculation based on the effective medium theory model proved that ITR was reduced via the amination of rGO. Infrared thermal imaging and finite element simulation showed that NH2-rGO/PI thermally conductive composite films obtained excellent heat dissipation and efficient thermal management capabilities on the light-emitting diodes bulbs, 5G high-power chips, and other electronic equipment, which are easy to generate heat severely.

APA, Harvard, Vancouver, ISO, and other styles

9

Chung, Woong June, and Jae-Han Lim. "Improved Thermally Activated Building System Design Method Considering Integration of Air Systems." Advances in Civil Engineering 2018 (June 26, 2018): 1–11. http://dx.doi.org/10.1155/2018/4928746.

Full text

Abstract:

The purpose of the thermally activated building system design is to maintain the thermal comfort of the building indoor environment by securing enough thermal output of the system. For preventing the condensation on the thermally activated building system, the air system is mostly integrated with the thermally activated building system. However, the common design method in the standards only considers the thermal performance of the system itself and cannot reflect the effects of the air system. Thus, the design process of the thermally activated building system should include the consideration about the latent load and ventilation. In order to reflect the effect of the air system, the amount of sensible load removed by the thermally activated building system and air system should be included in the design process. The sensible load handled by the air system highly depends on the type of the air system and design consideration to prevent the condensation and maintain the indoor air quality. In this study, the air system choosing process was included by simulating and observing the sensible load removed by different types of the air system, and thermal performance adjustment in the design process was proposed.

APA, Harvard, Vancouver, ISO, and other styles

10

Rinkevicius, V., and G. Kavaliauskiene. "Thermal quenching of thermally stimulated conductivity." Journal of Physics D: Applied Physics 27, no. 6 (1994): 1267–71. http://dx.doi.org/10.1088/0022-3727/27/6/025.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Thermally"

1

Hardy, Brian Sauer. "Thermally-actuated microfluidics." Diss., Restricted to subscribing institutions, 2009. http://proquest.umi.com/pqdweb?did=1998391971&sid=1&Fmt=2&clientId=1564&RQT=309&VName=PQD.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Nelkien, Haim. "Thermally driven circulation." Woods Hole, Mass. : Woods Hole Oceanographic Institution, 1987. http://hdl.handle.net/1912/3152.

Full text

Abstract:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Earth, Atmospheric and Planetary Sciences, and (Ph. D.)--Woods Hole Oceanographic Institution, 1987.<br>Cover title. Includes bibliographical references (leaves 181-186).

APA, Harvard, Vancouver, ISO, and other styles

3

Ladbury, John Edward Simon Durham. "Thermally conducting polymers." Thesis, University of Greenwich, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.236267.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Nelken, Haim. "Thermally driven circulation." Thesis, Massachusetts Institute of Technology, 1987. http://hdl.handle.net/1721.1/58495.

Full text

Abstract:

Thesis (Ph. D.)--Joint Program in Oceanography (Massachusetts Institute of Technology, Dept. of Earth, Atmospheric, and Planetary Sciences; and the Woods Hole Oceanographic Institution), 1987.<br>Includes bibliographical references (leaves 181-186).<br>Several problems connected by the theme of thermal forcing are addressed herein. The main topic is the stratification and flow field resulting from imposing a specified heat flux on a fluid that is otherwise confined to a rigid insulating basin. In addition to the traditional eddy viscosity and diffusivity, turbulent processes are also included by a convective overturning adjustment at locations where the local density field is unstable. Two classes of problems are treated. The first is the large scale meridional pattern of a fluid in an annulus. The detailed treatment is carried out in two steps. In the beginning (chapter 2) it is assumed that the fluid is very diffusive, hence, to first approximation no flow field is present. It is found that the convective overturning adjustment changes the character of the stratification in all the regions that are cooled from the top, resulting in a temperature field that is nearly depth independent in the northernmost latitudes. The response to a seasonal cycle in the forcing, and the differences between averaging the results from the end of each season compared to driving the fluid by a mean forcing are analyzed. In particular, the resulting sea surface temperature is warmer in the former procedure. This observation is important in models where the heat flux is sensitive to the gradient of air to sea surface temperatures. The analysis of the problem continues in chapter 5 where the contribution of the flow field is included in the same configuration. The dimensionless parameter controlling the circulation is now the Rayleigh number, which is a measure of the relative importance of gravitational and viscous forces. The effects of the convective overturning adjustment is investigated at different Rayleigh numbers. It is shown that not only is the stratification now always stable, but also that the vigorous vertical mixing reduces the effective Rayleigh number; thereby the flow field is more moderate, the thermocline deepens, and the horizontal surface temperature gradients are weaker. The interior of the fluid is colder compared to cases without convective overturning, and, because the amount of heat in the system is assumed to be fixed, the surface temperature is warmer. The fluid is not only forced by a mean heat flux, or a seasonally varying one, but its behavior under permanent winter and summer conditions is also investigated. A steady state for the experiments where the net heat flux does not vanish is defined as that state where the flow field and temperature structure are not changing with time except for an almost uniform temperature decrease or increase everywhere. It is found that when winter conditions prevail the circulation is very strong, while it is rather weak for continuous summer forcing. In contrast to those results, if a yearly cycle is imposed, the circulation tends to reach a minimum in the winter time and a maximum in the summer. This suggests that, depending on the Rayleigh number, there is a phase leg of several months between the response of the ocean and the imposed forcing. Differences between the two averaging procedures mentioned before are also observed when the flow field is present, especially for large Rayleigh numbers. The circulation is found to be weaker and the sea surface temperature colder in the mean of the seasonal realizations compared to the steady state derived by the mean forcing. As an extension to the numerical results, an analytic model is presented in chapter 4 for a similar annular configuration.<br>by Haim Nelken.<br>Ph.D.

APA, Harvard, Vancouver, ISO, and other styles

5

Taherian, Ali Reza. "Thermal softening kinetics and textural quality of thermally processed vegetables." Thesis, McGill University, 1995. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=23301.

Full text

Abstract:

Dry Romano beans (Phaseolus vulgaris) were soaked and cooked at temperatures ranging from 70 to 100$ sp circ$C for different time intervals. The rate of texture softening associated with each temperature was found to be consistent with two simultaneous pseudo first-order kinetic mechanisms 1 and 2. Approximately 40% of the firmness of Romano beans was lost by the rapid softening mechanism 1. The remaining firmness loss was characterized by mechanism 2 which was found to be much slower ($ sim$1/50th of the former). The temperature dependence indicator (z value) of reaction rate constants were 30 and 24 C$ sp circ$, respectively for mechanisms 1 and 2 with associated activation energies of 82 kJ/mole and 103 kJ/mole, respectively.<br>Turnip (Brassica napobbrassica) and beet roots (B. Vulgaris L.) were cooked at temperatures ranging from 70 to 100$ sp circ$C for different time intervals. Three textural properties (firmness, springiness, and stiffness) were found to follow the same trend of apparent first order kinetic theory with two substrates. Temperature dependence of softening (z value) was found to be within 27 and 35 C$ sp circ ,$ with activation energies in the range of 93 and 60 kJ/mole.<br>Cylindrical turnip, beet root pieces and Romano beans were packed in thin profile plastic containers and cylindrical metal cans and thermally processed in the static and rotational modes. Through heat penetration testing, process times were adjusted to give an equivalent lethality of 10 min for each product. Thin profile packed vegetables, in all cases, were found to have a firmer and stiffer texture. On the other hand, for rotational processing, the result showed no significant improvement in textural properties (firmness, springiness and stiffness) over the still counterparts. It was found that previously determined kinetic data could be used to estimate texture retention.

APA, Harvard, Vancouver, ISO, and other styles

6

Sul, Onejae Washburn Michael Sean. "Thermally actuated mechanical systems." Chapel Hill, N.C. : University of North Carolina at Chapel Hill, 2006. http://dc.lib.unc.edu/u?/etd,392.

Full text

Abstract:

Thesis (Ph. D.)--University of North Carolina at Chapel Hill, 2006.<br>Title from electronic title page (viewed Oct. 10, 2007). "... in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Physics and Astronomy." Discipline: Physics and Astronomy; Department/School: Physics and Astronomy.

APA, Harvard, Vancouver, ISO, and other styles

7

Wang, Chaoming. "Thermally annealled plasmonic nanostructures." Doctoral diss., University of Central Florida, 2012. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/5556.

Full text

Abstract:

Localized surface plasmon resonance (LSPR) is induced in metal nanoparticles by resonance between incident photons and conduction electrons in nanoparticles. For noble metal nanoparticles, LSPR can lead to strong absorbance of ultraviolet-violet light. Although it is well known that LSPR depends on the size and shape of nanoparticles, the inter-particle spacing, the dielectric properties of metal and the surrounding medium, the temperature dependence of LSPR is not well understood. By thermally annealing gold nanoparticle arrays formed by nanosphere lithography, a shift of LSPR peak upon heating has been shown. The thermal characteristics of the plasmonic nanoparticles have been further used to detect chemicals such as explosive and mercury vapors, which allow direct visual observation of the presence of mercury vapor, as well as thermal desorption measurements.<br>ID: 031001538; System requirements: World Wide Web browser and PDF reader.; Mode of access: World Wide Web.; Adviser: Ming Su.; Title from PDF title page (viewed August 21, 2013).; Thesis (Ph.D.)--University of Central Florida, 2012.; Includes bibliographical references (p. 95-108).<br>Ph.D.<br>Doctorate<br>Materials Science Engineering<br>Engineering and Computer Science<br>Materials Science and Engineering

APA, Harvard, Vancouver, ISO, and other styles

8

Morrison, Graeme A. "Thermally driven hydromagnetic dynamos." Thesis, University of Glasgow, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.312706.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Davis, Michael Woods. "Thermally induced fast fracture /." The Ohio State University, 1985. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487262825077516.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Pierce, Benjamin Franklin Ashby Valerie. "Thermally-responsive polyester urethanes." Chapel Hill, N.C. : University of North Carolina at Chapel Hill, 2008. http://dc.lib.unc.edu/u?/etd,1982.

Full text

Abstract:

Thesis (Ph. D.)--University of North Carolina at Chapel Hill, 2008.<br>Title from electronic title page (viewed Dec. 11, 2008). "... in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Chemistry." Discipline: Chemistry; Department/School: Chemistry.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Thermally"

1

Nelkien, Haim. Thermally driven circulation. Woods Hole Oceanographic Institution, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Young, Richard James. Thermally assisted liberation. University of Birmingham, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Parliment, Thomas H., Michael J. Morello, and Robert J. McGorrin, eds. Thermally Generated Flavors. American Chemical Society, 1993. http://dx.doi.org/10.1021/bk-1994-0543.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Pocock, Jonathan. Thermally assisted comminution. University of Birmingham, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

I, Bessonov M., and Wright W. W. 1928-, eds. Polyimides--thermally stable polymers. Consultants Bureau, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Tomaszewicz, Władysław. Termicznie stymulowane prądy w nieuporządkowanych ciałach stałych. Wydawn. Politechniki Gdańskiej, 2005.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Chen, Reuven, and Vasilis Pagonis. Thermally and Optically Stimulated Luminescence. John Wiley & Sons, Ltd, 2011. http://dx.doi.org/10.1002/9781119993766.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Mustafa, H. D., Sunil H. Karamchandani, Shabbir N. Merchant, and Uday B. Desai. tuPOY: Thermally Unstable Partially Oriented Yarns. Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2632-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Vyazovkin, Sergey. Isoconversional Kinetics of Thermally Stimulated Processes. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-14175-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wang, Shuo, ed. Chemical Hazards in Thermally-Processed Foods. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-8118-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Thermally"

1

Gooch, Jan W. "Thermally Stabilized." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11756.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Eslami, Reza, Richard B. Hetnarski, Jozef Ignaczak, Naotake Noda, Naobumi Sumi, and Yoshinobu Tanigawa. "Thermally Induced Instability." In Theory of Elasticity and Thermal Stresses. Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-6356-2_21.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Hetnarski, Richard B., and M. Reza Eslami. "Thermally Induced Vibrations." In Solid Mechanics and Its Applications. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-10436-8_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Grandy, Walter T. "Thermally Driven Systems." In Foundations of Statistical Mechanics. Springer Netherlands, 1988. http://dx.doi.org/10.1007/978-94-009-2881-7_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zilles, Joerg Ulrich. "Thermally Conductive Additives." In Encyclopedia of Polymers and Composites. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-37179-0_37-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Zilles, Joerg Ulrich. "Thermally Conductive Additives." In Encyclopedia of Polymers and Composites. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-37179-0_37-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Zilles, Joerg Ulrich. "Thermally Conductive Additives." In Polymers and Polymeric Composites: A Reference Series. Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-642-37179-0_37-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Felba, Jan. "Thermally Conductive Nanocomposites." In Nano-Bio- Electronic, Photonic and MEMS Packaging. Springer US, 2009. http://dx.doi.org/10.1007/978-1-4419-0040-1_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Gooch, Jan W. "Thermally Foamed Plastic." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11755.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Gooch, Jan W. "Thermally Stimulated Current." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11757.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Thermally"

1

Beghini, M., L. Bertini, and F. Frendo. "Thermal Expansion of Thermally Sprayed Coatings." In ITSC 1998, edited by Christian Coddet. ASM International, 1998. http://dx.doi.org/10.31399/asm.cp.itsc1998p1595.

Full text

Abstract:

Abstract The coefficient of thermal expansion (CTE) of a NiCoCrAlY coating was investigated in this work. The CTE was inferred from the measured length variations of coated prismatic symmetric specimens (i.e. having the coating on two opposite surfaces) at various temperature increments. The elongation of the specimen was evaluated from the relative positions of two markers, which was recorded during the test by a CCD video camera; analysis with subpixeling technique allowed high resolution in the dilatation measurements. Analytical relationships used to determine the coating's CTE were based on the simple multilayer beam model; the temperature dependent elastic moduli of the layers had been determined by four point bend test in a previous work. Coated specimens were employed having different substrate thicknesses in order to check the accuracy of measurements.

APA, Harvard, Vancouver, ISO, and other styles

2

Topaloglu, N., P. M. Nieva, M. Yavuz, and J. P. Huissoon. "Thermal modeling of thermally isolated microplates." In The 15th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, edited by Douglas K. Lindner. SPIE, 2008. http://dx.doi.org/10.1117/12.776574.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Mykhailyk, Viacheslav, Tetiana Korinchevska, Dmytro Korinchuk, and Valerii Dakhnenko. "Thermal decomposition of thermally treated granulated wood." In Chemical technology and engineering. Lviv Polytechnic National University, 2019. http://dx.doi.org/10.23939/cte2019.01.282.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Neelakantan, Sriram, and Bennett Joiner. "Thermal Performance of Thermally Enhanced PBGA Packages." In ASME 2005 Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems collocated with the ASME 2005 Heat Transfer Summer Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/ipack2005-73303.

Full text

Abstract:

Enhancement of thermal performance of a PBGA (plastic ball grid array) is often accomplished by embedding metal layers in the substrate and the inclusion of a copper spreader in the mold compound. The thermal effectiveness of the substrate planes in spreading the heat is frequently compromised by the necessity to separate the various voltages on the power plane and the required clearance regions around the electrical vias. Determining the appropriate effective conductivity has frequently been addressed by engineering judgment. Detailed simulation of the entire package, inclusive of structural detail in all the substrate planes, is very time consuming and inefficient. In the paper, the determination of the effective conductivity is accomplished with a simplified finite element representation of each metal layer capturing the connectivity of the traces or the metal patterns in the planes. The appropriate conductivities are then used in a detailed CFD model. The two stage process was chosen to model the performance of the thermally enhanced PBGA with and without a copper spreader placed at the top of the mold compound. A test case of a 516 27×27 mm PBGA was used. The model results are compared against experimental measurements. The CFD model was used to determine the performance with heat sinks in natural and forced convection environments and the results compared to experimental measurements.

APA, Harvard, Vancouver, ISO, and other styles

5

Wilhelm, Helena M., Paulo O. Fernandes, Leandro G. Feitosa, et al. "Thermal Faults Involving Thermally Upgraded Kraft Paper." In 2018 IEEE PES Transmission & Distribution Conference and Exhibition - Latin America (T&D-LA). IEEE, 2018. http://dx.doi.org/10.1109/tdc-la.2018.8511742.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Garcia, E., C. Cano, M. I. Osendi, P. Miranzo, and T. W. Coyle. "Thermal Behaviour of Thermally Sprayed CaZrO3 Coatings." In ITSC2008, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. http://dx.doi.org/10.31399/asm.cp.itsc2008p1004.

Full text

Abstract:

Abstract CaZrO3 coatings were alternatively prepared by air plasma spray and flame spray processes. The microstructural characteristics and crystalline phases of the coatings were comparatively studied as a function of the spraying temperature achieved with each technique and the stand off distance. Image analyses were used to estimate their porosity. Thermal diffusivity was measured on free-standing thick coatings using the laser flash technique. Thermal conductivity was obtained from the experimental thermal diffusivity and density data. The hardness of the coatings was evaluated by Vickers indentation tests. Finally, different thermal treatments were carried out to evaluate the evolution of the crystalline phases and the properties of the coatings.

APA, Harvard, Vancouver, ISO, and other styles

7

Raman, Chandrashekar, and Peter Schmidt Sane. "Thermally conductive plastics for innovative thermal management solutions." In 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). IEEE, 2016. http://dx.doi.org/10.1109/itherm.2016.7517545.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Shi, Yongqiang, William H. Steier, Mai Chen, Larry R. Dalton, and Luping Yu. "Thermally Stable NLO Polymers Based on Thermal Crosslinking." In Nonlinear Optics. Optica Publishing Group, 1992. http://dx.doi.org/10.1364/nlo.1992.fa6.

Full text

Abstract:

The relaxation of the dipole alignment over time and particularly at elevated temperatures of electric field poled second order NLO organic materials is one of the problems facing this technology. The limited temperature range makes it difficult to process the material into devices and difficult to package the devices into circuits. The prospects for hybrid circuits of combined semiconductor and organic devices on semiconductor substrates are promising but will require organic materials with improved thermal stability.

APA, Harvard, Vancouver, ISO, and other styles

9

Grossmann, Siegfried, and Detlef Lohse. "Thermally driven turbulence." In 101st WE-Heraeus-Seminar. WORLD SCIENTIFIC, 1993. http://dx.doi.org/10.1142/9789814503648_0008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Clark, Timothy E., and Mary W. Burrell. "Thermally Switched Coupler." In O-E/Fiber LASE '88, edited by Eric Udd. SPIE, 1989. http://dx.doi.org/10.1117/12.948900.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Thermally"

1

Guidotti, Ronald Armand. Thermally-related safety issues associated with thermal batteries. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/889003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

None, None. Thermally activated technologies: Technology Roadmap. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/1216242.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ding, Jian. Thermally stable metal/GaAs contacts. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5524462.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

A. Boehman, C. Song, H. H. Schobert, M. M. Coleman, P. G. Hatcher, and S. Eser. Advanced Thermally Stable Jet Fuels. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/2238.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Schobert, H. H. Advanced thermally stable jet fuels. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/775227.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Merzbacher, Celia, Robert Bernstein, Zachary Homrighaus, and Debra Rolison. Thermally Emitting Iron Aerogel Composites. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada382821.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Megahed, T. N. E. D. ,. Kukacka, L. E., and J. J. Fontana. Development of thermally stable polymer concrete. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/6550841.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Rue, Loring W., Cioffi III, Jr William G., et al. Thromboembolic Complications in Thermally Injured Patients,. Defense Technical Information Center, 1992. http://dx.doi.org/10.21236/ada268670.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Lincoln, Jason E., David B. Curliss, Jr Brown, and Thomas J. Thermally Conductive Structural 2D Composite Materials. Defense Technical Information Center, 2012. http://dx.doi.org/10.21236/ada577472.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Renlund, A. M., J. C. Miller, W. M. Trott, et al. Characterization of thermally degraded energetic materials. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/629380.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!