Log in

Relevant bibliographies by topics / Thermo-Electric module / Journal articles

To see the other types of publications on this topic, follow the link: Thermo-Electric module.

Journal articles on the topic 'Thermo-Electric module'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Thermo-Electric module.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Attivissimo, Filippo, Carlo Guarnieri Calò Carducci, Anna Lanzolla, and Maurizio Spadavecchia. "An Extensive Unified Thermo-Electric Module Characterization Method." Sensors 16, no. 12 (2016): 2114. http://dx.doi.org/10.3390/s16122114.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Dr., S. Sreenatha Reddy, Naveen Kumar G., and Sridhar |. M. Sai Siri K. "Design and Fabrication of Thermo Electric Refrigerator." International Journal of Trend in Scientific Research and Development 3, no. 3 (2019): 1299–304. https://doi.org/10.31142/ijtsrd23356.

Full text

Abstract:

In the recent years, we have many problems such as energy crises and environment degradation due to increasing CO2 emissions on ozone layer depletion has become the primary concern to both developed and developing countries. Using thermo electric module is going to be one of the most effective, clean and environment friendly system. The main advantage of the thermoelectric refrigerator is no need of any refrigerant and mechanical devices like compressor, prime mover, etc for its operation. Thermo electric refrigerator works on the principle of Peltier effect, when a direct current is passed be

APA, Harvard, Vancouver, ISO, and other styles

3

P. Ravindra Kumar et al.,, P. Ravindra Kumar et al ,. "Modelling and Analysis of Thermo Electric Cooler Module Using ANSYS." International Journal of Mechanical and Production Engineering Research and Development 9, no. 3 (2019): 1249–58. http://dx.doi.org/10.24247/ijmperdjun2019131.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Gupta, Rinki, Vaishnavi Rout, Khushi Rajput, V. K. Chawla, Hassan Fouad, and M. S. Akhtar. "A Sustainable Method to Convert Waste Heat Energy to Electricity by Using Thermo-Electric Generators." Journal of Nanoelectronics and Optoelectronics 18, no. 4 (2023): 502–9. http://dx.doi.org/10.1166/jno.2023.3410.

Full text

Abstract:

This paper aims to generate clean electricity by utilizing waste heat available in the environment. To achieve this, a thermoelectric generator (TEG) is used in conjunction with a Peltier module, voltage regulator, and USB charging module. The Peltier modules are connected in series to maximize voltage and minimize loss. The proposed methodology is first numerically modeled and simulated using Ansys and COMSOL, after which the model is developed with an assembly of all the above-mentioned modules. The paper mainly focuses on the sustainable use of waste heat energy to produce clean energy in t

APA, Harvard, Vancouver, ISO, and other styles

5

D’Aucelli, G. M., N. Giaquinto, C. Guarnieri Caló Carducci, M. Spadavecchia, and A. Trotta. "Uncertainty evaluation of the Unified Method for thermo-electric module characterization." Measurement 131 (January 2019): 751–63. http://dx.doi.org/10.1016/j.measurement.2018.08.070.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Zhang, Lin, Tsai, Wu, and Wu. "A Thermo-electric Apparatus for Thermal Diffusivity and Thermal Conductivity Measurements." Energies 12, no. 22 (2019): 4238. http://dx.doi.org/10.3390/en12224238.

Full text

Abstract:

In this study, a one-dimensional heat transfer measurement device is developed based on the mathematical theory of the Angstrom method. To conform to the mathematical assumption, it is required that the device precisely controls the heat source to generate sinusoidal temperature signal. A thermo-electric module is used as the heat source for the measurement platform. This module is connected to a computer for program control, such that the temperature can be controlled quickly, precisely, and dynamically. In this study, five common heat-conducting materials are tested to verify the proposed on

APA, Harvard, Vancouver, ISO, and other styles

7

Sredenšek, Klemen, Bojan Štumberger, Miralem Hadžiselimović, Sebastijan Seme, and Klemen Deželak. "Experimental Validation of a Thermo-Electric Model of the Photovoltaic Module under Outdoor Conditions." Applied Sciences 11, no. 11 (2021): 5287. http://dx.doi.org/10.3390/app11115287.

Full text

Abstract:

An operating temperature of the photovoltaic (PV) module greatly affects performance and its lifetime. Therefore, it is essential to evaluate operating temperature of the photovoltaic module in different weather conditions and how it affects its performance. The primary objective of this paper is to present a dynamic thermo-electric model for determining the temperature and output power of the photovoltaic module. The presented model is validated with field measurement at the Institute of Energy Technology, Faculty of Energy Technology, University of Maribor, Slovenia. The presented model was

APA, Harvard, Vancouver, ISO, and other styles

8

S, Gomathi, Sri Vidhya D, and Venkatesan T. "Thermoelectric Based Power Generation for Battery Charging." Bulletin of Scientific Research 1, no. 2 (2019): 55–58. http://dx.doi.org/10.34256/bsr1927.

Full text

Abstract:

Power generation based on renewable energy sources has experienced an important growth due to the challenge of global warming and climatic conditions. This paper proposes the power generation based on Thermo Electric Modules. Peltier module is a device which converts heat energy into electrical energy. Peltier module is a device that uses the principle of thermoelectric effect and converts temperature differences in to an electric voltage and vice versa. The conversion technology is based on the See beck effect and high thermal concentration using optical concentrators. Pettier module produces

APA, Harvard, Vancouver, ISO, and other styles

9

Situmorang, Marhaposan, and Monika Panjaitan. "Solar Power-Based Thermo Electric Cooler (TEC) System." Journal of Technomaterial Physics 3, no. 2 (2021): 133–40. http://dx.doi.org/10.32734/jotp.v3i2.5624.

Full text

Abstract:

Solar energy has been considered as a promising renewable energy source for electric power generation. Solar panel systems have become a popular object to be developed by researchers, but the low efficiency of solar panels in energy conversion is one of the weaknesses of this system. Factors that affect the output produced by solar panels are the intensity of sunlight and the working temperature of the solar panels. The solar panel module has a single operating point where the voltage and current outputs produce the maximum power output. There are three main methods in Maximum Power Point Trac

APA, Harvard, Vancouver, ISO, and other styles

10

Ravi, Bhatt*1 Surendra Bharti2 &. Abhishek Shahi3. "CFD ANALYSIS OF EXHAUST HEAT EXCHANGER FOR THERMO-ELECTRIC POWER GENERATION." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 7 (2017): 62–73. https://doi.org/10.5281/zenodo.839119.

Full text

Abstract:

In thermo-electric power generation an exhaust heat exchanger is used for recovering exhaust heat and a thermo-electric module is used for converting heat into electricity.This research work focus on optimization of the design of exhaust heat exchanger by removing the internal fins and changing the cross-sectional area of heat exchanger to minimize the problem of pressure drop.The designs of exhaust heat exchangers used in the previous research works recovers maximum heat from an engine exhaust but they have main problem of pressure drop or back pressure which can stops engine functioning. Com

APA, Harvard, Vancouver, ISO, and other styles

11

Cao, Yanfei, Feng Ju, Lei Zhang, Dongming Bai, Fei Qi, and Bai Chen. "A novel variable-stiffness flexible manipulator actuated by shape memory alloy for minimally invasive surgery." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 232, no. 11 (2018): 1098–110. http://dx.doi.org/10.1177/0954411918802922.

Full text

Abstract:

This article presents a novel variable-stiffness flexible manipulator for minimally invasive surgery. Each module of the proposed manipulator contains a variable-stiffness mechanism actuated by proactive deformation of shape memory alloy. Due to low driving current, apparent mechanical deformation, suitable phase transformation temperature and biocompatibility of shape memory alloy wire actuation, it is well suited for the manipulator applied in minimally invasive surgery, where variable stiffness is urgently required. In this article, the conceptual design, elastic modulus model, thermo-elect

APA, Harvard, Vancouver, ISO, and other styles

12

Parveen, S., S. Victor Vedanayakam, and R. Padma Suvarna. "Thermoelectric generator electrical performance based on temperature of thermoelectric materials." International Journal of Engineering & Technology 7, no. 3.29 (2018): 189. http://dx.doi.org/10.14419/ijet.v7i3.29.18792.

Full text

Abstract:

In space applications, the radioisotope thermoelectric generators are being used for the power generation. The energy storage devices like fuel cells, solar cells cannot function in remote areas, in such cases the power generating systems can work successfully for generating electrical power in space missions. The efficiency of thermo electric generators is around 5% to 8% . Bismuth telluride has high electrical conductivity (1.1 x 105S.m /m2) and very low thermal conductivity (1.20 W/ m.K). A Thermoelectric generator has been built up consisting of a Bi2Te3 based on thermoelectric module. The

APA, Harvard, Vancouver, ISO, and other styles

13

Djafar, Zuryati, Nandy Putra, and Raldi A. Koestoer. "The Utilization of Heat Pipe on Cold Surface of Thermoelectric with Low-Temperature Waste Heat." Applied Mechanics and Materials 302 (February 2013): 410–15. http://dx.doi.org/10.4028/www.scientific.net/amm.302.410.

Full text

Abstract:

Thermoelectric (TE) modules are a thermo-element device that can harness the heat and convert it into electrical energy. As an electrical generator system, TE has several advantages i.e not noisy, easy maintenance, relatively small, lightweight and environmentally friendly because it does not produce pollution. In this paper, the research about the performance of TE modules that used for electric generator has been done. TE modules utilize low temperature waste-heat from a solar cell that simulated with a combination of a bulb and a collector plate. TE modules which tested are single and doubl

APA, Harvard, Vancouver, ISO, and other styles

14

Chen, Yiyi, Yuying Yan, and Bo Li. "Thermal Analyses of Power Electronics Integrated with Vapour Chamber Cooling." Automotive Innovation 3, no. 4 (2020): 328–35. http://dx.doi.org/10.1007/s42154-020-00123-z.

Full text

Abstract:

AbstractInsulated gate bipolar transistor (IGBT) power module is used for power switching transistor devices in the power supply and motor control circuits in both hybrid electric vehicles and electric vehicles. The target of heat flux of IGBT is continuously increasing due to the demand for power rating improvements and miniaturisation. Without suitable efficient cooling technologies, excessively high temperature and uneven temperature distribution can cause high thermal stress, eventually leading to severe module failures. Therefore, highly efficient cooling solutions are highly required. Va

APA, Harvard, Vancouver, ISO, and other styles

15

Berardone, Irene, and Marco Paggi. "Nondestructive monitoring of damage caused by accelerated ageing in photovoltaic modules." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, no. 23-24 (2019): 7565–72. http://dx.doi.org/10.1177/0954406219889382.

Full text

Abstract:

Accelerated ageing tests of photovoltaic laminates are requested by the IEC standards for quality control, which require the assessment of the electrical power losses after a prescribed amount of temperature and/or humidity cycles inside a climatic chamber (thermal cycling, humidity freeze, and damp heat tests). Since electric damage is measured only at the end of such tests, its kinetics induced by thermo-elastic stresses and the related degradation phenomena are reported in few cases. The aim of this study is to investigate the progress of damage, reporting the results of an unprecedented ex

APA, Harvard, Vancouver, ISO, and other styles

16

Khanh, Doan V. K., Pandian Vasant, Irraivan Elamvazuthi, and Vo N. Dieu. "Optimization Of Thermo-Electric Coolers Using Hybrid Genetic Algorithm And Simulated Annealing." Archives of Control Sciences 24, no. 2 (2014): 155–76. http://dx.doi.org/10.2478/acsc-2014-0010.

Full text

Abstract:

Abstract Thermo-electric Coolers (TECs) nowadays are applied in a wide range of thermal energy systems. This is due to their superior features where no refrigerant and dynamic parts are needed. TECs generate no electrical or acoustical noise and are environmentally friendly. Over the past decades, many researches were employed to improve the efficiency of TECs by enhancing the material parameters and design parameters. The material parameters are restricted by currently available materials and module fabricating technologies. Therefore, the main objective of TECs design is to determine a set o

APA, Harvard, Vancouver, ISO, and other styles

17

Balakrishnan, Arun Seeralan, Farrukh Nagi, Khairul Salleh, and Prem A/L Gunnasegaran. "Harvesting Waste Heat Energy from Automobile Engine Exhaust Using Teg with Heat Pipes." International Journal of Engineering & Technology 7, no. 4.35 (2018): 85. http://dx.doi.org/10.14419/ijet.v7i4.35.22332.

Full text

Abstract:

This research investigates how the heat from car exhaust pipe line can be recovered as power using passive Thermo electric generator (TEG) using heat pipes. In this research the heat pipes are place on the cold side of TEG to remove the rising temperature and hot side of TEG is placed on the circumference of exhaust pipe line of car engine. The heat pipes with and without nano-fluids were placed on cold side of TEGs to investigate heat removal from increasing temperature and too maintain constant temperature on cold side. On the basis of results from 3D finite element simulations and experimen

APA, Harvard, Vancouver, ISO, and other styles

18

Kakade, Niraj. "A Review of Different Types of Battery Cooling Systems in Electric Vehicles." International Journal for Research in Applied Science and Engineering Technology 11, no. 5 (2023): 2087–92. http://dx.doi.org/10.22214/ijraset.2023.52011.

Full text

Abstract:

Abstract: Electric vehicles (EVs) are becoming increasingly popular as they are more environmentally friendly than conventional vehicles. However, to ensure the longevity and efficiency of the EV batteries, a battery thermal management system (BTMS) is crucial. The temperature of the battery affects various aspects of its operation, including its performance, reliability, and life cycle cost. Therefore, it is essential to keep the battery temperature between 15°C to 35°C. This paper reviews different types of cooling systems used in lithium-ion batteries, including air cooling, liquid cooling,

APA, Harvard, Vancouver, ISO, and other styles

19

Vaidya, Dr V. B., Roshan S. Janve, Chetan D. Diwate, et al. "Review on Development of Thermoelectric Air cooler." International Journal for Research in Applied Science and Engineering Technology 10, no. 3 (2022): 210–14. http://dx.doi.org/10.22214/ijraset.2022.40610.

Full text

Abstract:

Abstract: With rising global temperatures leading to an increase in average temperatures throughout the year making people living in areas with high power outages very busy and difficult. As a modern cooling system that combines Coolers and Airconditioners does not work in the inverter for energy-saving purposes which makes them useless thus during high temperature hours. Therefore, in terms of combating the problem with portability, savings and cost-effectiveness in the concept of another climate it uses TEC while using the grid and re-charging. Although it is common knowledge that the effici

APA, Harvard, Vancouver, ISO, and other styles

20

Emetere, M. E., O. I. Osunlola, A. D. Adejumo, and A. O. Dauda. "Design and Construction of A Domestic Solar Power Bank in a Convective Environment." Open Fuels & Energy Science Journal 11, no. 1 (2018): 16–28. http://dx.doi.org/10.2174/1876973x01811010016.

Full text

Abstract:

Objective:This research seeks to solve the problem of storing solar energy in small scale modules for domestic use.Method:The Solar Power Bank (SPB) was constructed with local materials based on their individual properties. The functionality of the SPB was tested in a convective environment. Davis automatic Weather Station (DWS) was used to get the weather parameters (like solar irradiance, solar energy and temperature) for each day the SPB was tested. The maximum solar irradiance for four days (during the experiment) were 220 W/m2, 208 W/m2, 450 W/m2and 900 W/m2. The maximum solar energy was

APA, Harvard, Vancouver, ISO, and other styles

21

Korkut, Talha Batuhan, Aytaç Gören, and Ahmed Rachid. "Numerical and Experimental Study of a PVT Water System under Daily Weather Conditions." Energies 15, no. 18 (2022): 6538. http://dx.doi.org/10.3390/en15186538.

Full text

Abstract:

Worldwide need for renewable energy sources increases significantly with the drastic negative greenhouse effects of climate change. This study considers a water-cooled hybrid thermo-electric panel (PV/T) which contributes to better harvesting of solar energy. A numerical CFD model was developed for power generation of a standard PV panel as well as for a water-based PV/T system laminated with polymer matrix composite (PMC) materials, and user-defined functions (UDFs) were developed and integrated with the CFD model to implement exact boundary conditions. Experimentation under daily weather con

APA, Harvard, Vancouver, ISO, and other styles

22

Fan, Chang Xiu, Jing Kuan Duan, Ya Li, Shuang Xi Shao, and Pei De Han. "Study on the Preparation and Properties of Epoxy/PEI/Nano-Attapulgite Nanocomposites." Materials Science Forum 745-746 (February 2013): 341–51. http://dx.doi.org/10.4028/www.scientific.net/msf.745-746.341.

Full text

Abstract:

Polyether imides (PEI) and nanoattapulgite particles organically synthesized by the active silane containing epoxide groups (OAT) were used to modify the epoxy resin (ER). The effect of the concentration of OAT on the morphology, thermal and mechanical properties of ER/PEI/OAT nanocomposites was explored in the present work. The microscopic structure of nanocomposites was investigated by Scanning electric microscopy (SEM). The results showed that a homogeneous nanoattapulgite organically-modified by silane in the polymeric matrix was obtained. SEM images showed that the morphology transformati

APA, Harvard, Vancouver, ISO, and other styles

23

A. Marzouk, Osama. "Thermoelectric generators versus photovoltaic solar panels: Power and cost analysis." Edelweiss Applied Science and Technology 8, no. 5 (2024): 406–28. http://dx.doi.org/10.55214/25768484.v8i5.1697.

Full text

Abstract:

In the current study, the concept of building a power plant using thermoelectric generator (TEG) modules is investigated, both technically and economically. The hypothesized thermoelectric generation power plant is a modular system, consisting of a large array of electrically connected thermoelectric generator units for generating clean electricity with-out greenhouse gas (GHG) emissions, noise, or hazardous solid wastes. The envisioned thermoelectric generation power plant (TEGPP) considered here is assumed to utilize solar radiation as a heat source, and water as a heat sink. The viability o

APA, Harvard, Vancouver, ISO, and other styles

24

Takyi, G., E. H. Amalu, and P. K. Bernasko. "Effect of solder joint integrity on the thermal performance of a TEC for a 980 nm pump laser module." Soldering & Surface Mount Technology 23, no. 2 (2011): 115–19. http://dx.doi.org/10.1108/09540911111120186.

Full text

Abstract:

PurposeThe purpose of this paper is to evaluate the effect of solder wettability on the thermal performance of a thermo‐electric cooler (TEC) of a 980 nm pump laser module.Design/methodology/approachIn this paper, TEC thermal performance has been evaluated using a heat pump test. The results were compared with scanning acoustic microscopy (C‐SAM) results in order to have a better understanding of the thermal behaviour of the TEC. In the C‐SAM experiments, images were taken at the interfaces between the housing and TEC, as well as at the interfaces between the chip‐on‐carrier (CoC) and TEC.Find

APA, Harvard, Vancouver, ISO, and other styles

25

Selimefendigil, Fatih, and Hakan F. Öztop. "The potential benefits of surface corrugation and hybrid nanofluids in channel flow on the performance enhancement of a thermo-electric module in energy systems." Energy 213 (December 2020): 118520. http://dx.doi.org/10.1016/j.energy.2020.118520.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Maulana, Tajri, Teuku Azuar Rizal, and Nazaruddin. "Rancang Bangun dan Evaluasi Kinerja Kotak Pendingin Berbasis Termoelektrik." JURUTERA - Jurnal Umum Teknik Terapan 8, no. 01 (2021): 1–10. http://dx.doi.org/10.55377/jurutera.v8i01.4473.

Full text

Abstract:

The cooler is one of the necessities for humans to store food, drinks, vegetables, fruit, meat and so on. Refrigeration systems that are commonly used today use refrigerants or freon/CFC (Chlor Fluoro Carbon) which are less environmentally friendly and expensive. To meet the need for cheap and environmentally friendly refrigerators, an alternative cooler is needed. One alternative refrigerant that has been widely used today is thermoelectric. The power source is from an adapter with an output voltage of 12V – 36V DC6A. Peltier Is a Thermo-Electric Module. This component is coated by a thin cer

APA, Harvard, Vancouver, ISO, and other styles

27

G, Anusha,. "REFRIGERATION USING PELTIER EFFECT." INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, no. 04 (2024): 1–5. http://dx.doi.org/10.55041/ijsrem29990.

Full text

Abstract:

Refrigerators are being used nowadays, There are various types of refrigeration systems available in the market, each with advantages and disadvantages of its own. Using a thermoelectric cooling system will maintain a consistent temperature throughout and be lightweight, portable, and simple to use. This makes it perfect for the transportation and storage of live human organs as well as medications, immunizations, and blood banks. The gadget can be utilized in cars as long as the vehicle has a 12V DC source. The thermoelectric cooler is a new technique that has many advantages. At its prototyp

APA, Harvard, Vancouver, ISO, and other styles

28

Tark, Ziyad, Ahmed J. Hamed, and Abdul Hadi N. Khalifa. "Performance Study of the Thermoelectric Personal Cooler under Different Ambient Temperatures." International Journal of Heat and Technology 40, no. 1 (2022): 53–62. http://dx.doi.org/10.18280/ijht.400107.

Full text

Abstract:

In this study, a Thermo Electric Cooler (TEC) was manufactured and investigated experimentally. The heat sink, geometry, fin number, fin length, and heat sink dimensions are studied theoretically. The performance of the TEC is studied under three variables, namely: the THC power, airspeed, and ambient temperature. Two heat sinks are used for each Peltier module. The first one is for the cooling side, while the second one is for the hot side. In the theoretical part, the geometry and the dimensions of the heat sink are studied using one-dimensional heat transfer equations, as well as a theoreti

APA, Harvard, Vancouver, ISO, and other styles

29

S., Madhavan Nampoothiri, Sabu Sebastian M., and Sajith Kumar P.C. "Implementation of Peltier Cooling in Hermetically Sealed Electronic Packaging Unit for Sub-sea Vessel." Defence Science Journal 68, no. 3 (2018): 326. http://dx.doi.org/10.14429/dsj.68.12149.

Full text

Abstract:

This paper presents the methodology adopted for implementation of Peltier cooling in hermetically sealed electronic packaging units used in sub-sea vessels. In sub-sea vessels, sonar front-end electronics is packaged in hermetically sealed electronic packaging units. The thermal design of the unit is a highly challenging task considering the heat dissipation of 300W from the electronics, non-availability of chilled air for cooling and IP68 sealing requirements. Cooling fans cannot be integrated, since these units are to be placed in acoustically sensitive pressure capsule area of the subsea ve

APA, Harvard, Vancouver, ISO, and other styles

30

Evdulov, O. V., G. I. Aminov, I. Yu Aminova, I. G. Aminov, and G. A. Mutalipova. "Thermoelectric device for transpalpebral hypothermia of the anterior segment of the human eyeball." Herald of Dagestan State Technical University. Technical Sciences 51, no. 1 (2024): 14–21. http://dx.doi.org/10.21822/2073-6185-2024-51-1-14-21.

Full text

Abstract:

Objective. The purpose of the study is to develop the design of a thermoelectric device for transpalpebral hypothermia of the anterior segment of the human eyeball.Method. The design of a TEU for thermal impact on the anterior segment of the human eyeball is described. The device includes an impact tip mated with one surface to the human eyelid, and the opposite surface to the cold surface of the thermo-electric module. The hot surface is in contact with a housing filled with a working substance having a stable melting point ranging from 303 to 330 K. The device is equipped with an adjustable

APA, Harvard, Vancouver, ISO, and other styles

31

Naveen, Kumar, Setia Vaibhav, and Kumar Patel |. Satyam Upadhyay |. Saurabh Chauhan |. Prakhar Bajpai Sunil. "Analysis of Energy Generation from Exhaust of Automobile using Peltier Thermoelectric Generator." International Journal of Trend in Scientific Research and Development 3, no. 3 (2019): 749–51. https://doi.org/10.31142/ijtsrd22986.

Full text

Abstract:

In recent past days, big deal of the automobile industry's RESEARCH and DEVELOPMENT Practicing on improving overall efficiency of vehicle. It has brought a major interest in the field of making internal combustion engines highly efficient 1 . In past days, only 25 30 energy is used in the vehicle and rest is exposed to surroundings. The useful energy is used to run the engine as well as generator. So the efficiency of those engine were very less. But the efficiency can be improved by utilizing waste heat that is exhaust of vehicle. One of the best technology that was found to be useful for

APA, Harvard, Vancouver, ISO, and other styles

32

Kim, Eunsae, Jihun Song, Jaejin Lim, Hyobin Lee, Dohwan Kim, and Yong Min Lee. "Degradation Behavior of 21700 Cylindrical Lithium-Ion Cells during over-Discharge Cycling at Low Temperature." ECS Meeting Abstracts MA2022-02, no. 7 (2022): 2569. http://dx.doi.org/10.1149/ma2022-0272569mtgabs.

Full text

Abstract:

In case of electric vehicles (EVs) and energy storage systems (ESSs), multiple lithium-ion battery (LIB) cells are connected in series or parallel to supply the required capacity and power of appliances. However, there is inevitably a small difference in capacity among mass-produced cells. Furthermore, all the cells cannot degrade at the same rate in long-term usage. Thus, relatively more degraded cells in the module or pack can be over-charged or over-discharged, which can trigger the thermal runaway of LIBs. In this sense, many research groups have investigated the behaviors of over-charged

APA, Harvard, Vancouver, ISO, and other styles

33

Harvind, Yadav, Srivastav Durgesh, and Kumar |. Amit Kumar Yadav |. Akshay Goswami Gaurav. "Experimental Investigations and Analysis of Thermoelectric Refrigerator with Multiple Peltier Modules." International Journal of Trend in Scientific Research and Development 3, no. 3 (2019): 1337–40. https://doi.org/10.31142/ijtsrd23332.

Full text

Abstract:

As the conventional refrigeration system are large in size and consumes a lot of electrical energy which in terns leads to releases of more green house gases for production of electricity which is major environmental concern nowadays. Thermo electric refrigerators are compact and consume less electrical energy which supports use of renewable energy resources such as solar, tidal, wind power, etc. major applications of thermo electric refrigerator are in medical storage systems, blood tissue transfer and as a portable refrigerator. Harvind Yadav | Durgesh Srivastav | Gaurav Kumar | Amit Kumar Y

APA, Harvard, Vancouver, ISO, and other styles

34

Manfrida, Giampaolo, and Lorenzo Talluri. "Exergy Analysis of a Wood Fireplace Coupled with Thermo-Electric Modules." Proceedings 58, no. 1 (2020): 10. http://dx.doi.org/10.3390/wef-06920.

Full text

Abstract:

In recent years the climate change issue, coupled with the concern of resource depletion, is favoring the blossoming of renewable energy conversion systems. Particularly, the development of new technologies for the combustion of biomass has drawn special attention to the possibility of coupling thermoelectric modules with stove-fireplaces. The current thermoelectric generators have many attractive points, such as a solid structure, absence of noise, and no maintenance required; however, due to their very low efficiency (4–8%), they are still economically non-attractive. However, if the modules

APA, Harvard, Vancouver, ISO, and other styles

35

Ragupathi, P. "Thermal analysis of thermo electric generator for waste heat recovery." Sustainable Engineering Science and Research Journal 01, no. 01 (2022): 01–05. https://doi.org/10.5281/zenodo.6554823.

Full text

Abstract:

The thermoelectric generators (TEGs) are used to generate electric power. Thermo electric modules which are used in TEGs are utilized to change the thermal energy into electrical energy and it operates on the basic concept of See beck effect. Power generation by Thermo-Electric (TE) materials is an interesting method for the direct translation of thermal energy into electrical energy. This work discovers a method of analysis on the performance of TEGs with different materials for recovering the waste heat and converts it into electric power. For this, an experimental setup for waste heat recov

APA, Harvard, Vancouver, ISO, and other styles

36

Baldini, Andrea, Luca Cerofolini, Daniele Fiaschi, Giampaolo Manfrida, and Lorenzo Talluri. "Thermodynamic Assessment on the Integration of Thermo-Electric Modules in a Wood Fireplace." Civil and Environmental Engineering Reports 29, no. 4 (2019): 218–35. http://dx.doi.org/10.2478/ceer-2019-0056.

Full text

Abstract:

Abstract The growing demand for electricity produced from renewable sources and the development of new technologies for the combustion of biomass, arose a growing interest on the possible coupling of thermoelectric modules with stove-fireplaces. The current thermoelectric generators have a solid structure, do not produce noise, do not require maintenance and can be used for the recovery of waste heat or excess, at the same time they hold a very low conversion efficiency and they need an adequate cooling system. Nevertheless, they still hold a cost, which is still too high to make them attracti

APA, Harvard, Vancouver, ISO, and other styles

37

Kim, Se-Eun, Chang-Ho Jung, Moon-Gu Lee, Sangwon Han, Jung-Lyul Park, and Yongho Jeon. "Thermo-Mechanical Coupled Analysis of Electric Vehicle Drive Shafts." Applied Sciences 14, no. 24 (2024): 11768. https://doi.org/10.3390/app142411768.

Full text

Abstract:

With the growing concerns over global warming and abnormal weather patterns, the development of eco-friendly technologies has emerged as a critical research area in the transportation industry. In particular, the global automotive market, one of the most widely used sectors, has witnessed a surge in research on electric vehicles (EVs) in line with these trends. Compared to traditional internal combustion engine vehicles, EVs require components with high strength and durability to achieve optimal performance. This study focuses on the development of a constant velocity (CV) joint, a critical co

APA, Harvard, Vancouver, ISO, and other styles

38

De Souza, Deivid F., and Diego S. Greff. "Thermoelectric Characterization of IGBT Power Modules: An Approach by Static and Dynamic Methods." Eletrônica de Potência 30 (January 22, 2025): e202510. https://doi.org/10.18618/rep.e202510.

Full text

Abstract:

This study evaluates IGBT modules with a focus on efficiently measuring their thermal impedance, a critical factor in reliability assessments. The research employs the Thermo Electric Sensitive Parameter method to measure the Virtual Junction Temperature and obtain the Thermal Impedance curve. These experimental results are compared with datasheet values, using power modules without a baseplate. Two methodologies, dynamic and static, are utilized, both demonstrating consistent performance in evaluating thermal characteristics. The study also addresses the importance of accounting for non-linea

APA, Harvard, Vancouver, ISO, and other styles

39

Pichler, Franz, Niels Koester, and Alexander Thaler. "Thermo-electric simulation of battery-modules with reduced order modelling of linear electrical components." COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 36, no. 5 (2017): 1488–500. http://dx.doi.org/10.1108/compel-02-2017-0075.

Full text

Abstract:

Purpose This paper aims to present a fully coupled thermo-electrical finite-element battery model with an applied model-order reduction. The model is used to analyse the thermal design of battery modules during typical drive-cycles of electric vehicles. Design/methodology/approach A model-order reduction is applied, in which the electrical linear bus-bars are analysed in an a-priori step. For these bus-bars, special distributed basis-functions are computed, which make the solution of differential Ohm's law unnecessary during the transient simulation. Furthermore, the distributed basis-function

APA, Harvard, Vancouver, ISO, and other styles

40

Buttay, Cyril, C. Mark Johnson, Jeremy Rashid, et al. "High Temperature Direct Double Side Cooled Inverter Module for Hybrid Electric Vehicle Application." Materials Science Forum 556-557 (September 2007): 709–12. http://dx.doi.org/10.4028/www.scientific.net/msf.556-557.709.

Full text

Abstract:

In this paper a novel approach to the design and fabrication of a high temperature inverter module for hybrid electrical vehicles is presented. Firstly, SiC power electronic devices are considered in place of the conventional Si devices. Use of SiC raises the maximum practical operating junction temperature to well over 200°C, giving much greater thermal headroom between the chips and the coolant. In the first fabrication, a SiC Schottky barrier diode (SBD) replaces the Si pin diode and is paired with a Si-IGBT. Secondly, doublesided cooling is employed, in which the semiconductor chips are sa

APA, Harvard, Vancouver, ISO, and other styles

41

Blanovsky, Anatoly. "Novel Photo/Thermal-Electric and Fission-Electric Power Systems." Applied Sciences Research Periodicals 3, no. 04 (2025): 01–10. https://doi.org/10.63002/asrp.304.984.

Full text

Abstract:

Current green energy programs are incomplete without the long-term solution to the nuclear waste problem. In particular, spent fuel and depleted uranium (DU) that could be a major source of nuclear energy and isotopes are now being managed as waste. To integrate electrical-in-nature nuclear energy into green grids, a thermo-electric gas cooled water moderated small modular reactor (SMR) with a fission-electric (FE) corecan be used. Also,only about half of the solar radiation makes it to the Earth surface; the rest is either absorbed or reflected by clouds, and the atmosphere. A hybrid blackbod

APA, Harvard, Vancouver, ISO, and other styles

42

Yadav, Shambhoo, Prathima Yamasani, and Sudarshan Kumar. "Experimental studies on a micro power generator using thermo-electric modules mounted on a micro-combustor." Energy Conversion and Management 99 (July 2015): 1–7. http://dx.doi.org/10.1016/j.enconman.2015.04.019.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Li, Xiaobai, Sergei Chumakov, Jake Christensen, Xiaoxuan Zhang, and Christian Linder. "Thermal-Mechanical-Electrochemical Coupling Simulation for Electric Vehicle Batteries." ECS Meeting Abstracts MA2018-01, no. 32 (2018): 1954. http://dx.doi.org/10.1149/ma2018-01/32/1954.

Full text

Abstract:

The major trend toward vehicle electrification intensifies the need for increased battery energy densities. During the development of new electric vehicle battery technologies, it has become clear that thermal, mechanical, and electrochemical coupling effects play an important role in battery performance, degradation, and response to abusive conditions. The macro-homogeneous Dualfoil model, which solves ion transport and charge transfer dynamics, predicts the electrical response of a single small battery cell. However, when considering large cells or assembled battery modules and packs, inhomo

APA, Harvard, Vancouver, ISO, and other styles

44

Elghool, Ali, Firdaus Basrawi, Hassan Ibrahim, Thamir K. Ibrahim, Shaharin A. Sulaiman, and M. Ishak. "Study on the Performance of a Thermo-Electric Generation Model with Two Different Materials of Heat Pipe-Heat Sink." MATEC Web of Conferences 225 (2018): 04009. http://dx.doi.org/10.1051/matecconf/201822504009.

Full text

Abstract:

Heat sink lack of design is one reason that negatively affects the performance of thermoelectric modules. As compared to conventional cooling systems equipped with thermoelectric generators (TEG), heat pipe heat sink has various points of interest. Heat pipe heat sink is the most appropriate heat exchanger for medium temperature range under 300 °C. This paper demonstrates the effect of different materials of heat pipe-heat sink on the TEG performance. Two types of heat sinks were tested with TEG, one made from copper while the other from aluminium. The aim is to improve power output of TEG by

APA, Harvard, Vancouver, ISO, and other styles

45

Rowe, D. M. "Recent advances in silicon-germanium alloy technology and an assessment of the problems of building the modules for a radioisotope thermo-electric generator." Journal of Power Sources 19, no. 4 (1987): 247–59. http://dx.doi.org/10.1016/0378-7753(87)87001-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Vigneshwaran, P., N. Padmavathi, G. Nirmala, and A. Sowmiya. "An Intelligent Cooling System Based on Predictive Time Domain Algorithm with Thermoelectric Coolers for Wind Turbines." Journal of New Materials for Electrochemical Systems 25, no. 2 (2022): 142–44. http://dx.doi.org/10.14447/jnmes.v25i2.a08.

Full text

Abstract:

Development of Power Electronics devices (PED) made renewable energy generation of power more feasible than that of traditional power plant generation. In India, Tamil Nadu the major source of renewable generation is come from Wind generation. Due to PED, heat generated is the Major issues in wind power generation, which consequence in terrible combustion accidents and disasters. Cooling system such as compressor based cooling scheme or two phases cooling is provided in addition to natural air cooling. The major disadvantages of the scheme are their volume, requirement of large power supplies

APA, Harvard, Vancouver, ISO, and other styles

47

Edwards, Michael, Klas Brinkfeldt, Ulrich Rusche, et al. "The shear strength of nano-Ag sintered joints and the use of Ag interconnects in the design and manufacture of SiGe-based thermo-electric modules." Microelectronics Reliability 55, no. 5 (2015): 722–32. http://dx.doi.org/10.1016/j.microrel.2015.02.004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Rincón Casado, Alejandro, Mauricio Larrodé-Díaz, Francisco Fernandez Zacarias, and Ricardo Hernández Molina. "Experimental and Computational Model for a Neonatal Incubator with Thermoelectric Conditioning System." Energies 14, no. 17 (2021): 5278. http://dx.doi.org/10.3390/en14175278.

Full text

Abstract:

This work describes the design, construction and testing of a thermo-electric conditioning device installed in a neonatal incubator with the aim of improving the precision in the regulation of the interior air temperature, reducing noise and interior vibration, and improving the life of the neonate. A simplified one-dimensional thermal model has been developed, made up of resistances and thermal capacities that simulate the thermal behaviour of all the elements of the system from end to end. All the equations of the model are obtained in a nodal way, allowing the mathematical relationship betw

APA, Harvard, Vancouver, ISO, and other styles

49

Diwania, Sourav, Rajeev Kumar, Maneesh Kumar, Varun Gupta, and Theyab R. Alsenani. "Performance enrichment of hybrid photovoltaic thermal collector with different nano-fluids." Energy & Environment, April 25, 2022, 0958305X2210934. http://dx.doi.org/10.1177/0958305x221093459.

Full text

Abstract:

This work manifests the influence of different nanoparticles on the photovoltaic-thermal (PVT) system. The hybrid PVT (hPVT) systems provide thermo-electric energy by utilizing the module heat. The module heat is recovered for controlling the cell temperature using coolant in the channel. This work examines the impact of the type and volume concentration of different nano-fluids on the cell temperature, outlet temperature, thermo-electric efficiency of hPVT collectors. Copper (Cu), titanium dioxide (TiO2), and silicon dioxide (SiO2) dispersed in pure water are considered nano-fluids in this st

APA, Harvard, Vancouver, ISO, and other styles

50

Diwania, Sourav, Rajeev Kumar, Maneesh Kumar, Varun Gupta, and Theyab R. Alsenani. "Performance enrichment of hybrid photovoltaic thermal collector with different nano-fluids." Energy & Environment, April 25, 2022, 0958305X2210934. http://dx.doi.org/10.1177/0958305x221093459.

Full text

Abstract:

This work manifests the influence of different nanoparticles on the photovoltaic-thermal (PVT) system. The hybrid PVT (hPVT) systems provide thermo-electric energy by utilizing the module heat. The module heat is recovered for controlling the cell temperature using coolant in the channel. This work examines the impact of the type and volume concentration of different nano-fluids on the cell temperature, outlet temperature, thermo-electric efficiency of hPVT collectors. Copper (Cu), titanium dioxide (TiO2), and silicon dioxide (SiO2) dispersed in pure water are considered nano-fluids in this st

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!