Relevant bibliographies by topics / Thermo test

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Thermo test'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Thermo test.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Thermo test"

1

Yang, Shuyao, Zhigang Zhou, and Kai Li. "Experimental Study on the Cracking Resistance of Asphalt Mixture with Different Degrees of Aging." Applied Sciences 13, no. 15 (2023): 8578. http://dx.doi.org/10.3390/app13158578.

Full text
Abstract:
The cracking resistance of asphalt mixture is a non-negligible issue. However, the cracking resistance evolution law, motivated by two factors (thermos-oxidative aging degree and test temperature), is not yet well understood. The aim of this investigation is to gain more insight into the effect of thermos-oxidative aging and test temperature on the cracking resistance of asphalt mixture. Asphalt mixture (AC-13) and stone mastic asphalt mixture (SMA-13) were selected and exposed to different thermo-oxidative aging degrees (unaging (UA); short-term thermo-oxidative aging (STOA); long-term thermo
APA, Harvard, Vancouver, ISO, and other styles
2

Priadi, Dedi, Richard A. M. Napitupulu, and Eddy S. Siradj. "Developing Uniaxial Tensile Test as an Alternate Method for Thermo Mechanical Process Evaluation." Advanced Materials Research 383-390 (November 2011): 5404–8. http://dx.doi.org/10.4028/www.scientific.net/amr.383-390.5404.

Full text
Abstract:
The alternate method for evaluating the thermo mechanical process has been developed. Small attention has been paid to the mechanism of plastic deformation especially plane strain analysis. Modified the specimen geometry and using uniaxial tensile test was done to view the process. Experimental results show that the forming limit diagram as one of the formability characteristic can be view the plane strain condition that present on the thermo mechanical process. The microstructure result shows that there is a similar grain structure between hot tensile test and hot rolling results as one of th
APA, Harvard, Vancouver, ISO, and other styles
3

D, Y. M. "Thermo Scientific : un test hydrocodone OK FDA." Option/Bio 28, no. 557-558 (2017): 6. http://dx.doi.org/10.1016/s0992-5945(17)30034-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lee, Biing-Lin. "Thermo-mechanical test methods for polymeric powders." Powder Technology 63, no. 1 (1990): 97–101. http://dx.doi.org/10.1016/0032-5910(90)80012-n.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lekakh, S. N., M. Buchely, R. O'Malley, L. Godlewski, and Mei Li. "Thermo-cycling fatigue of SiMo ductile iron using a modified thermo-mechanical test." International Journal of Fatigue 148 (July 2021): 106218. http://dx.doi.org/10.1016/j.ijfatigue.2021.106218.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Al-Judy, Dr Hikmat J. "The Influence of Silica Dioxide and Aluminum Oxide Nano Fillers Reinforced Heat Cured Acrylic Denture Base Material and Thermocycling on Tensile and Shear Bond to Denture Soft Lining Material." Mustansiria Dental Journal 14, no. 1 (2019): 99. http://dx.doi.org/10.32828/mdj.v14i1.767.

Full text
Abstract:
Background: Soft lining materials play an important role in modern prosthodonticstreatment because of their capability to restore the inflamed and distorted mucosa.The purpose of the research was to estimate the influence of acrylic denture basereinforcement with silanted nano fillers (Al2O3 and Sio2) separately on tensile andshear bond strength of soft lining material and studying effect of thermo cyclingon bonding strength.Materials and methods: Total 120 specimens were prepared; it divided into 60Specimens for shear bond strength test and 6o specimens for tensile bond strengthtest. Specimen
APA, Harvard, Vancouver, ISO, and other styles
7

Qin, L., and W. J. Yu. "Research on Surface Color, Properties of Thermo-Treated Reconstituted Bamboo Lumber after Artificial Weathering Test." Advanced Materials Research 79-82 (August 2009): 1395–98. http://dx.doi.org/10.4028/www.scientific.net/amr.79-82.1395.

Full text
Abstract:
Reconstituted bamboo Lumber suffers surface and mechanical properties degradation after exposure to outdoor environment. In this paper, Neosinocalamus affinis bamboo bundles was selected to thermo-treated at three temperature levels (160,180 and 200°C) for 2 hours and investigated the effect of xenon-arc light irradiation with water spray on the changes in color, thickness and mechanical properties of reconstituted bamboo lumber. The results indicated that the surface color of the samples changed rapidly during the irradiation process and the change rate decreased as the increasing of thermo-t
APA, Harvard, Vancouver, ISO, and other styles
8

Dalmat, Yann-Mickael. "Marquage CE pour un test Thermo Fisher Scientific." Option/Bio 32, no. 643-644 (2021): 9. http://dx.doi.org/10.1016/s0992-5945(21)00240-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Xian Hua, Hong Tao Li, and Zhen Dong Qian. "Fracture Properties of Epoxy Asphalt Mixture." Key Engineering Materials 417-418 (October 2009): 917–20. http://dx.doi.org/10.4028/www.scientific.net/kem.417-418.917.

Full text
Abstract:
The fracture properties of the thermo-setting materials of epoxy asphalt mixture were evaluated based on J-integral concept and ultimate strength and compared to that of HMA with thermo-plastic binder materials. Totally 60 specimens cored from SGC with different notches were tested with SCB test under a temperature of -10°C and 20°C. The experimental results reveals that epoxy asphalt mixture has a super higher resistance of fracture at low temperature than thermo-plastic HMA due to its super high tensile strength and flexibility, and the influences of temperature on the fracture resistance of
APA, Harvard, Vancouver, ISO, and other styles
10

Zandarin, M. T., A. Gens, S. Olivella, and E. E. Alonso. "Thermo-hydro-mechanical model of the Canister Retrieval Test." Physics and Chemistry of the Earth, Parts A/B/C 36, no. 17-18 (2011): 1806–16. http://dx.doi.org/10.1016/j.pce.2011.10.009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Thermo test"

1

Muñoz, Juan Jorge. "Thermo-hydro-mechanical analysis of soft rock. Application to a large scale heating test and large scale ventilation test." Doctoral thesis, Universitat Politècnica de Catalunya, 2007. http://hdl.handle.net/10803/6244.

Full text
Abstract:
Esta Tesis está dirigida al análisis teórico y experimental de problemas acoplados Termo-Hidro Mecánico (THM) que se desarrollan en formaciones geológicas profundas destinadas al almacenamiento de residuos radiactivos de alta actividad. En las últimas décadas, han sido estudiadas las formaciones arcillosas para ser utilizadas como barreras geológicas debido a su reducida conductividad hidráulica. La degradación de las rocas arcillosas producida por efectos de temperatura y por efectos de variación en el grado de saturación, es un factor de fundamental importancia, que es actualmente investigad
APA, Harvard, Vancouver, ISO, and other styles
2

Emslie, Frank Norman. "Flownex analysis of high temperature test reactor thermo-hydraulic benchmarks / Frank Norman Emslie." Thesis, North-West University, 2005. http://hdl.handle.net/10394/469.

Full text
Abstract:
The High Temperature engineering Test Reactor (HTTR) is an experimental High Temperature Gas-cooled Reactor (HTGR) built by the Japanese Atomic Energy Research Institute (JAERI) to facilitate tests of HTGR technology. One of these test activities involves the validation and verification of thermo-hydraulic codes used in the design of similar HTGR plants. This report details the benchmarking of the Flownex simulation package as used by PBMR (Fly.) Ltd., a South African company developing another type of HTGR known as the Pebble Bed Modular Reactor. The benchmark is of a loss-of-off-site-power e
APA, Harvard, Vancouver, ISO, and other styles
3

De, la Cruz Miguel. "The influence of transient thermo-elastohydrodynamic conjunctions on automotive transmission rattle." Thesis, Loughborough University, 2011. https://dspace.lboro.ac.uk/2134/8042.

Full text
Abstract:
Automotive transmission rattle is the noise generated due to impacts between manual transmissions meshing gear teeth in the presence of backlash. It is considered to be a Noise, Vibration and Harshness (NVH) phenomenon and is originated due to combustion irregularities (engine order vibrations), especially in diesel vehicles. This thesis focuses in the case of creep rattle for the MMT6 Ford Getrag transmission (six speeds plus reverse) with a DW10b, 4-cylinder, 4-stroke, 2.0 litres diesel engine. This particular rattle condition is fundamentally similar to any other where an engaged gear is pe
APA, Harvard, Vancouver, ISO, and other styles
4

Cao, Xiao. "Optimization of Bonding Geometry for a Planar Power Module to Minimize Thermal Impedance and Thermo-Mechanical Stress." Diss., Virginia Tech, 2011. http://hdl.handle.net/10919/77252.

Full text
Abstract:
This study focuses on development a planar power module with low thermal impedance and thermo-mechanical stress for high density integration of power electronics systems. With the development semiconductor technology, the heat flux generated in power device keeps increasing. As a result, more and more stringent requirements were imposed on the thermal and reliability design of power electronics packaging. In this dissertation, a boundary-dependent RC transient thermal model was developed to predict the peak transient temperature of semiconductor device in the power module. Compared to conventi
APA, Harvard, Vancouver, ISO, and other styles
5

Rouleau, Jean. "Développement d'un nouveau concept de test de réponse thermo-hydraulique pour échangeurs de chaleur géothermiques verticaux." Master's thesis, Université Laval, 2015. http://hdl.handle.net/20.500.11794/26537.

Full text
Abstract:
Il est important de connaître la conductivité thermique du sol ainsi que l’amplitude et l’orientation de la vitesse des écoulements souterrains lors du dimensionnement d’un champ de puits géothermiques. Ce mémoire présente la méthodologie et les conclusions d’une analyse numérique d’un nouveau concept de test de réponse thermique (TRT) pour échangeurs de chaleur géothermiques verticaux. Cette configuration de TRT permet de mesurer à la fois les propriétés hydrauliques du sol et ses propriétés thermiques. Le but premier du mémoire est de vérifier la validité du concept pour ensuite développer u
APA, Harvard, Vancouver, ISO, and other styles
6

Laverty, Danny Anthony. "Investigation of the thermo-structural response of axially loaded concrete masonry walls using a model test methodology." Thesis, University of Ulster, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.394612.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hartmann, Steffen. "Thermo-Mechanische Charakterisierung von Grenzflächen zwischen Einwandigen Kohlenstoffnanoröhren und Metallen mittels Auszugsversuchen." Doctoral thesis, Universitätsbibliothek Chemnitz, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-197660.

Full text
Abstract:
Vor dem Hintergrund zukünftiger Sensoren, basierend auf dem piezoresistiven Effekt von einwandigen Kohlenstoffnanoröhren (SWCNT), werden in dieser Arbeit umfangreiche Ergebnisse zum mechanischen Verhalten von Grenzflächen zwischen SWCNTs und edlen Metallen am Beispiel von Pd und Au präsentiert. Im Fokus steht dabei die Synergie von rechnerischen und experimentellen Methoden Molekulardynamik (MD), nanoskalige Tests und Analytik , um (1) mit guter Genauigkeit maximale Kräfte von gezogenen SWCNTs, welche in Metall eingebettet sind, vorauszuberechnen und (2) einen wertvollen Beitrag zum Verständni
APA, Harvard, Vancouver, ISO, and other styles
8

Hartmann, Steffen. "Thermo-Mechanische Charakterisierung von Grenzflächen zwischen Einwandigen Kohlenstoffnanoröhren und Metallen mittels Auszugsversuchen." Doctoral thesis, Universitätsverlag der Technischen Universität Chemnitz, 2015. https://monarch.qucosa.de/id/qucosa%3A20402.

Full text
Abstract:
Vor dem Hintergrund zukünftiger Sensoren, basierend auf dem piezoresistiven Effekt von einwandigen Kohlenstoffnanoröhren (SWCNT), werden in dieser Arbeit umfangreiche Ergebnisse zum mechanischen Verhalten von Grenzflächen zwischen SWCNTs und edlen Metallen am Beispiel von Pd und Au präsentiert. Im Fokus steht dabei die Synergie von rechnerischen und experimentellen Methoden Molekulardynamik (MD), nanoskalige Tests und Analytik , um (1) mit guter Genauigkeit maximale Kräfte von gezogenen SWCNTs, welche in Metall eingebettet sind, vorauszuberechnen und (2) einen wertvollen Beitrag zum Verständni
APA, Harvard, Vancouver, ISO, and other styles
9

Van, der Merwe Petrus Gerhardus. "Method for the thermo-hydraulic analysis of the test facility for the PBMR reserve shutdown system / Petrus Gerhardus van der Merwe." Thesis, North-West University, 2004. http://hdl.handle.net/10394/535.

Full text
Abstract:
The Pebble Bed Modular Reactor (PBMR) is a revolutionary small, compact and safe nuclear power plant. It operates on a direct closed Brayton cycle. One of the unique features of this concept is its load following capability enabled by extracting or injecting of the working fluid (in the PBMR's case Helium) from or to the system during operation. The Reserve Shutdown System (RSS) is one of the essential subsystems of the PBMR. The RSS is used as a maintenance and secondary shutdown system for the PBMR. Small Absorber Spheres (SAS) containing boron are used to perform the shutdown. When shutdown
APA, Harvard, Vancouver, ISO, and other styles
10

Gbetchi, Kokouvi. "Multi-scale modeling of thermo-mechanical dynamic damage in quasi-brittle materials." Electronic Thesis or Diss., Université de Lorraine, 2020. http://www.theses.fr/2020LORR0049.

Full text
Abstract:
Sous l’effet des impacts mécaniques, les structures constituées de matériaux fragiles peuvent être exposés à la rupture dynamique. La modélisation appropriée des mécanismes de rupture à différentes échelles d’observation et la prédiction de l’endommagement thermomécanique dans ces matériaux sont essentielles pour la conception de structures fiables. Des observations expérimentales sur la rupture dynamique des matériaux fragiles montrent des effets de refroidissement et d’échauffement importants à proximité d’une pointe de fissure. La modélisation du couplage thermomécanique lors de la rupture
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Thermo test"

1

Laverty, Danny Anthony. Investigation of the thermo-structural response of axially loaded concrete masonry walls using a model test methodology. The Author], 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

United States. National Aeronautics and Space Administration., ed. Monoball energy transfer: Test report. University of Alabama, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

United States. National Aeronautics and Space Administration. Office of the Chief Engineer. Evaluation of the NASA arc jet capabilities to support mission requirements. National Aeronautics and Space Administration, Office of the Chief Engineer, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Smith, David R. Interlaboratory comparison of the guarded horizontal pipe-test apparatus: Precision of ASTM standard test method C-335 applied to mineral-fiber pipe insulation. U.S. Dept. of Commerce, National Institute of Standards and Technology, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

United States. National Aeronautics and Space Administration., ed. QM-8 field joint protection system final report. Morton Thiokol, Inc., Space Division, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

United States. National Aeronautics and Space Administration., ed. QM-8 field joint protection system final report. Morton Thiokol, Inc., Space Division, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

United States. National Aeronautics and Space Administration., ed. QM-8 field joint protection system final report. Morton Thiokol, Inc., Space Division, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Cooling Tower Institute (U.S.). CTI code tower standard specifications: Acceptance test code for water cooling towers. Cooling Tower Institute, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Keyser, Matt. NREL battery thermal and life test facility. National Renewable Energy Laboratory, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

IEEE Power Engineering Society. Transformers Committee., Institute of Electrical and Electronics Engineers., IEEE Xplore (Online service), and Institute of Electrical and Electronics Engineers., eds. IEEE standard test procedure for thermal evaluation of liquid-immersed distribution and power transformers. The Institute of Electrical and Electronics Engineers, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Thermo test"

1

Pang, John Hock Lye. "Thermo-Mechanical Reliability Test and Analysis." In Lead Free Solder. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4614-0463-7_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lang, Jochen, Gunter Knoll, Richard Schönen, Dirk Jaitner, Hans-Josef Schiffgens, and Stephan Schlüter. "Simulation of a High-Pressure Fuel Pump under Thermo-Elastohydrodynamic Conditions." In VPC – Simulation und Test 2015. Springer Fachmedien Wiesbaden, 2018. http://dx.doi.org/10.1007/978-3-658-20736-6_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, Kang-Hee, Chang-Hwan Shin, Heung-Seok Kang, Dong-Seok Oh, and Nam-Kyu Park. "Operating Vibration Measurements of Test Fuel Assembly in Reactor Thermo-hydraulic Test Condition." In Conference Proceedings of the Society for Experimental Mechanics Series. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9299-4_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Heinze, Tassilo, Hans-Joachim Koriath, and Alexander Pavlovich Kuznetsov. "Thermal Growth of Motor Spindle Units." In Lecture Notes in Production Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-34486-2_17.

Full text
Abstract:
AbstractThe paper deals with strategies for numerical compensation of thermo-mechanical deformation of machine tool spindles and the TCP, respectively. Methods for digital modelling and simulating the temperatures and thermo-elastic deformation are presented. This is done by considering the geometry, material data, drive signals and temperature values. The topic of compensating thermo-elastic effects in spindle units is an important topic in manufacturing. Analytical equation and function block methods for measuring and predicting thermal spindle growth are compared. The heat flow model conver
APA, Harvard, Vancouver, ISO, and other styles
5

Ding, Wen, Kui Zhang, Ronghua Chen, et al. "Thermo-Physical Property Database of Fusion Materials and Thermo-Hydraulic Database of Breeder Blankets for CFETR." In Springer Proceedings in Physics. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_45.

Full text
Abstract:
AbstractThe Chinese Fusion Engineering Test Reactor (CFETR) is a fusion engineering reactor independently designed and developed by China, and the design of the blanket is one of the key points during the design of CFETR. The configurations of CFETR, the detailed designs of the three types of blankets and typical blanket module, and the coolant flowing schemes in blanket module are introduced in paper. Besides, the work about Thermo-physical Property Database of Fusion Material and Thermo-hydraulic Database of Models established for the three types of blankets is presented. The fusion material
APA, Harvard, Vancouver, ISO, and other styles
6

Amira, Sellami, Guesmi Mohamed Hedi, and Elleuch Riadh. "Enhanced Disc Brake Thermo-Kinetics for Better Wear Test Reproducibility." In Applied Condition Monitoring. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-34190-8_45.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Lang, Jochen, Gunter Knoll, Peter Böhm, and Alexander Rieß. "Thermo-Elastohydrodynamic Connecting Rod Simulation of a Four Stroke Medium Speed Engine." In Experten-Forum Powertrain: Simulation und Test 2020. Springer Berlin Heidelberg, 2021. http://dx.doi.org/10.1007/978-3-662-63606-0_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Agatonovic, P., H. Fuhrmann, and D. Roos. "An Originally Scaled Test Unit of a Modular Gas Cooled Receiver of 50 MW Thermal Power." In Thermo-Mechanical Solar Power Plants. Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5402-1_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Linchun, Liping Wang, and Guiyun Li. "Analysis of Engine Oil Containing MoDTC on the Thermo-Oxidation Engine Oil Simulation Test (TEOST 33C)." In Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33841-0_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Selvadurai, A. P. S. "An Analysis of the Pulse Test and the Light of Residual Hydraulic Potentials." In Thermo-Hydromechanical and Chemical Coupling in Geomaterials and Applications. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118623565.ch25.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Thermo test"

1

Nissim, Ruggero, Alessandro Lorenzo Palma, Biagio Di Pietra, and Maria-Anna Segreto. "S.A.P.I.EN.T.E Experimental Test Facility For Full-Scale Testing Of New Configurations Of Collective Thermal Electric Self-Consumption From Renewable Sources. First Experimental Test With Thermo-Photovoltaic Collectors Plant." In EuroSun 2024: 15th International Conference on Solar Energy for Buildings and Industry. International Solar Energy Society, 2024. https://doi.org/10.18086/eurosun.2024.02.15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sun, Yongxin, and Xia Zhao. "Simulation and Testing Research of Thermo-electric Field for Large Generator Stator Bar End in Hipot Test." In 2024 3rd International Conference on Energy, Power and Electrical Technology (ICEPET). IEEE, 2024. http://dx.doi.org/10.1109/icepet61938.2024.10626706.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Allen, Morgan, and Jarek Nowinka. "Synergistic Evaluation of Casing Materials for Cyclic-Temperature Sour Wells." In CORROSION 2015. NACE International, 2015. https://doi.org/10.5006/c2015-05988.

Full text
Abstract:
Abstract Casing in extreme-temperature sour wells must withstand severe loading, including large temperature excursions, cyclic plastic deformation, and exposure to sour environments. Those conditions lead to synergistic material damage where different degradation mechanisms accelerate one another. Current understanding of synergies between thermo-mechanical loading and sour corrosion-cracking is limited. No industry standard exists for evaluation of tubular materials under such combined loading. The evaluation methodology presented here was developed to assess material performance under combi
APA, Harvard, Vancouver, ISO, and other styles
4

Chang, Benjamin T. A., and Ali N. Moosavi. "Critical Pre-Qualification Test Protocol for External High Temperature Pipeline Coatings." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-3804.

Full text
Abstract:
Abstract In the past, the service temperature for the large diameter external pipeline coatings has tended to be below 65 °C. Both FBE (fusion bonded epoxy) and 3LPE (3 layer polyethylene) have performed reasonably well at these temperatures. In recent years however, higher service temperature pipeline coatings have been requested by end users worldwide. In response to this demand, coating manufacturers have fabricated several new FBE coatings of high glass transition temperatures and phenolic epoxy coatings for this market. However, as yet there is no publicly accepted test protocol to qualif
APA, Harvard, Vancouver, ISO, and other styles
5

Fischer, L., C. Durrer, and U. Hoffmann. "P5 - Thermo Portal at the Gotthard Road Tunnel." In SENSOR+TEST Conferences 2011. AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2011. http://dx.doi.org/10.5162/irs11/ip5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Habbe, Burkhard. "C6.3 - Thermo Harvesting – More and Enduring Power for Wireless Systems." In SENSOR+TEST Conferences 2009. AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2009. http://dx.doi.org/10.5162/sensor09/v2/c6.3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Florkowski, Dennis W., and Theodore W. Selby. "The Development of a Thermo-Oxidation Engine Oil Simulation Test (TEOST)." In International Fuels & Lubricants Meeting & Exposition. SAE International, 1993. http://dx.doi.org/10.4271/932837.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Magnien, J., J. Rose, M. Pfeiler-Deutschmann, et al. "Accelerated thermo-mechanical test method for LED modules." In 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). IEEE, 2016. http://dx.doi.org/10.1109/eurosime.2016.7463304.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Marchal, Paul, Geert Van der Plas, Paresh Limaye, et al. "Verifying thermal/thermo-mechanical behavior of a 3D stack - challenges and solutions." In 2010 International Symposium on VLSI Design, Automation and Test (VLSI-DAT). IEEE, 2010. http://dx.doi.org/10.1109/vdat.2010.5496679.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Miers, Collier, Geoff Wehmeyer, and Carlos H. Hidrovo. "A Novel Thermo-Hydraulic Test Platform for Micropillared Array Thermal Wick Optimization." In ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/icnmm2012-73192.

Full text
Abstract:
Heat pipes have immense potential in the future of thermal management in electronic devices. As a passive device, they rely solely upon capillary forces to recirculate the coolant from the condenser to the evaporator via a wicking structure. In intermediate temperature heat pipes the limiting factor for heat removal is the capillary limit, which indicates the maximum recirculation rate that the capillary forces can induce. This capillary limit must be increased to allow heat pipes to remain a viable option for heat management within electronic devices. The aim of this work is to characterize a
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Thermo test"

1

Stauffer, Philip H., Amy B. Jordan, Dylan Robert Harp, et al. Thermo-hydrological and chemical (THC) modeling to support Field Test Design. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1171663.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pyatina, Tatiana, and T. Sugama. TEST-CEM: Sustainable Geothermal Well Cements for Challenging Thermo-Mechanical Conditions. Office of Scientific and Technical Information (OSTI), 2024. https://doi.org/10.2172/2507147.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Carey, Ashley, Madeleine Roberson, Isaac Howard, and Jameson Shannon. Toward a method to predict thermo-mechanical properties of high-strength concrete placements. Engineer Research and Development Center (U.S.), 2025. https://doi.org/10.21079/11681/49660.

Full text
Abstract:
In this article, the merits of a thermo-mechanical framework to estimate properties of high-strength concrete are evaluated for potential standardization as a test method. Previous work conducted by the authors was summarized to show the individual advancements toward development of a laboratory testing framework. Most notably, laboratory-based curing protocols have been shown to produce temperature profiles that were similar to mass placements and achieving peak temperatures that were within 2°C of peak temperatures recorded in a mass high-strength concrete placement. Additionally, current te
APA, Harvard, Vancouver, ISO, and other styles
4

Schmidt, Walker. L51926 Effects of Welding on HAZ Softening of X70-X80 TMCP Linepipe Steels. Pipeline Research Council International, Inc. (PRCI), 2000. https://doi.org/10.55274/r0010657.

Full text
Abstract:
Experimental work was done to evaluate the effects of welding on the hardness, tensile and toughness properties of the heat affected zone (HAZ) of a series of commercial high strength micro-alloyed linepipe steels, produced through controlled rolling and accelerated cooling (thermo-mechanical control process - TMCP). The test materials, representative of modern low carbon linepipe steels, were selected such as to cover a broad range of chemistries (alloy /micro-alloy designs) and mechanical properties (X 70 and X 80).
APA, Harvard, Vancouver, ISO, and other styles
5

Machute, Ana, Lucas Tamele Jr., Arão Manhique, Afonso Macheca, and Hermínio Muiambo. Effect of jatropha curcas oil on the thermorheological properties of asphalt binder modified with recycled HDPE. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.ss.cep.1.

Full text
Abstract:
The application of bio-oils in asphalt and polymer-modified asphalt (PMA), has recently received considerable attention as a pivotal method for enhancing the high-temperature performance of asphalt mixtures while maintaining good binder’s workability. In this study, Jatropha curcas oil (JCO) was selected and evaluated as an PMA modifier. JCO-rHDPE-modified bio-asphalt was prepared with different JCO contents: 1, 3, and 5 wt.%. Physical tests (penetration, softening point, and ductility), rheological tests (dynamic viscosity and rolling thin-film oven test–RTFOT), and thermogravimetric analysis
APA, Harvard, Vancouver, ISO, and other styles
6

Ersoy, Daniel. 693JK31810003 Non-Destructive Tools for Surface to Bulk Correlations of Yield Strength Toughness and Chemistry. Pipeline Research Council International, Inc. (PRCI), 2022. http://dx.doi.org/10.55274/r0012206.

Full text
Abstract:
Evaluates the use of non-destructive surface testing (micro indentation, micro-machining, in situ chemistry, and replicate microscopy analysis) as a means to perform pipe material confirmation. The test results from thousands of lab and field material tests done on actual pipeline samples have been used to develop models that account for pipe material thermo-mechanical process variations and through-wall variability of material, mechanical, and chemical properties. A separate "training set" of twenty pipelines was made available to GTI, Element Resources, and ASU to allow initial model testing
APA, Harvard, Vancouver, ISO, and other styles
7

Weeks and Dash Weeks. L52336 Weld Design Testing and Assessment Procedures for High-strength Pipelines Curved Wide Plate Tests. Pipeline Research Council International, Inc. (PRCI), 2011. http://dx.doi.org/10.55274/r0010452.

Full text
Abstract:
A variety of mechanical property tests are performed in the design, construction and maintenance phase of a pipeline. Most of the tests are performed by use of small-scale specimens with size typically in the range of a few inches to tens of inches (1 in = 25.4 mm). There are numerous test labs capable of performing most small-scale tests. These tests can be performed effectively under a variety of conditions, e.g., test temperature, strain rate, and loading configuration. More importantly, most routine small-scale tests are performed in accordance with national and international standards, en
APA, Harvard, Vancouver, ISO, and other styles
8

Koski, J. A., N. R. Keltner, and K. B. Sobolik. Thermal test options. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10178564.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bunn, Sarah. Antibody tests for COVID-19. Parliamentary Office of Science and Technology, 2020. http://dx.doi.org/10.58248/rr31.

Full text
Abstract:
There is insufficient scientific evidence to know whether the presence of SARS-CoV-2 antibodies confers protection from subsequent infections, and if so at what level. Antibodies are only one part of the immune response to infection. Tests that detect SARS-CoV-2 antibodies are available. They can determine whether someone has had COVID-19. Tests can reveal those who are unaware that they had COVID-19 because they had mild or no symptoms. Test samples must be analysed in a laboratory – no home tests are authorised for use in the UK. The Government provides antibody tests for NHS and social care
APA, Harvard, Vancouver, ISO, and other styles
10

Prudkov, Mikhail, Vasily Ermolaev, Elena Shurygina, and Eduard Mikaelyan. Electronic educational resource "Hospital Surgery for 5th year students of the Faculty of Pediatrics". SIB-Expertise, 2024. http://dx.doi.org/10.12731/er0780.29012024.

Full text
Abstract:
Electronic educational resourc was created for independent work of 5th year students of the pediatric faculty in the study of the discipline "Hospital Surgery". The possibility of control by the teacher is provided. This EER includes an introductory module, a topic module, and a quality assessment module. The structure of each topic in the EER (there are 19 topics in total) consists of the following sections: educational and methodological tasks on the topic, abstract of the topic, control tests on the topic, clinical situational tasks on the topic and a list of references. The section "Summar
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Thermo test' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography