Log in

Relevant bibliographies by topics / Thermocompressors / Journal articles

To see the other types of publications on this topic, follow the link: Thermocompressors.

Journal articles on the topic 'Thermocompressors'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 31 journal articles for your research on the topic 'Thermocompressors.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Fischer, Fabian, and Hans-Detlev Kühl. "Generation of compressed air by cascaded thermocompressors – project status." E3S Web of Conferences 313 (2021): 04003. http://dx.doi.org/10.1051/e3sconf/202131304003.

Full text

Abstract:

Compressed air is one of the most widely used industrial energy sources, and its production by mechanical compressors is extremely expensive and, in addition, inefficient. Therefore, the utilization of waste heat, which accrues on a large scale in many industrial applications, by means of a thermocompressor is an obvious alternative. This contribution presents a design approach to experimentally investigate a reciprocating thermocompressor with a self-actuated overdriven free displacer. These experiments shall be the basis for the design and realization of a cascade of identical stages, which

APA, Harvard, Vancouver, ISO, and other styles

2

Fischer, Fabian, and Hans-Detlev Kühl. "Generation of compressed air by cascaded thermocompressors – project status." E3S Web of Conferences 313 (2021) (October 22, 2021): 04003. https://doi.org/10.1051/e3sconf/202131304003.

Full text

Abstract:

Compressed air is one of the most widely used industrial energy sources, and its production by mechanical compressors is extremely expensive and, in addition, inefficient. Therefore, the utilization of waste heat, which accrues on a large scale in many industrial applications, by means of a thermocompressor is an obvious alternative. This contribution presents a design approach to experimentally investigate a reciprocating thermocompressor with a self-actuated overdriven free displacer. These experiments shall be the basis for the design and realization of a cascade of identical stages, which

APA, Harvard, Vancouver, ISO, and other styles

3

Lin, Wen-Ye, Xiao-Hua Wu, Jun-Ling Yang, and Lu-Wei Yang. "Experimental study and numerical analysis of thermocompressors with annular regenerators." International Journal of Refrigeration 36, no. 4 (2013): 1376–87. http://dx.doi.org/10.1016/j.ijrefrig.2013.02.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Akulich, P. V. "On the Efficiency of using Thermocompressors in the Processes of Drying and Heat Treatment of Materials and a Method for Calculating them." Journal of Engineering Physics and Thermophysics 86, no. 6 (2013): 1273–79. http://dx.doi.org/10.1007/s10891-013-0950-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Ortega-Delgado, Bartolomé, Matteo Cornali, Patricia Palenzuela, and Diego C. Alarcón-Padilla. "Operational analysis of the coupling between a multi-effect distillation unit with thermal vapor compression and a Rankine cycle power block using variable nozzle thermocompressors." Applied Energy 204 (October 2017): 690–701. http://dx.doi.org/10.1016/j.apenergy.2017.07.062.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Stanković, Branko. "Modified Steam-Turbine Rankine Cycle without Rejection of the Cycle Condensation Heat, Driven by a Wet-Vapor-Region Thermocompressor." Energija, ekonomija, ekologija XXVI, no. 2 (2024): 71–78. http://dx.doi.org/10.46793/eee24-2.71s.

Full text

Abstract:

The disclosed concept relates to a novel modified and simplified steam-turbine Rankine cycle without rejection of the cycle waste heat of condensation, which is driven by a thermocompressor (ejector) operating in the wet-vapor region. The thus modified steam-turbine Rankine cycle can theoretically achieve the maximum possible thermal efficiency (~100%). The wet-vapor mixture circulating within the thermocompressor is being separated in a dedicated cylindrical separation tank, so that the saturated water is pumped to a water heater where it receives the cycle heat input, while the saturated vap

APA, Harvard, Vancouver, ISO, and other styles

7

Kozhemyakin, V. V., and N. A. Morozov. "Application of a thermocompressor in a nuclear power plant with a liquid metal coolant." Transactions of the Krylov State Research Centre S-I, no. 1 (2021): 171–72. http://dx.doi.org/10.24937/2542-2324-2021-1-s-i-171-172.

Full text

Abstract:

The paper considers the possibility of using a thermocompressor at a nuclear power plant with a liquid metal coolant. The work is devoted to how, by increasing the output pulse, to achieve an increase in pressure.

APA, Harvard, Vancouver, ISO, and other styles

8

Wu, Xiao Hua, Lu Wei Yang, Jun Ling Yang, and Wen Ye Lin. "Experimental Study of Linear Motor Direct-Driven Thermocompressor." Advanced Materials Research 732-733 (August 2013): 1147–52. http://dx.doi.org/10.4028/www.scientific.net/amr.732-733.1147.

Full text

Abstract:

A prototype thermocompressor driven by linear motor was setup and experimental tudied. Peak-peak pressure in the system was influenced by the regenerator, the heating temperature and the gap clearance between piston and cylinder. The optimal frequency of the system was determined by spring constant and total mass of piston, shaft and moving iron. The peak-peak pressure was found to change little with filling pressure when the heating temperature was lower than 250°C, employing with N2 or He4 as the working substance. But when the heating temperature was higher than 250°C, peak-peak pressure in

APA, Harvard, Vancouver, ISO, and other styles

9

Edwards, M. J., and R. B. Peterson. "Reciprocating thermocompressor performance with non-ideal component characteristics." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 221, no. 4 (2007): 459–71. http://dx.doi.org/10.1243/09576509jpe412.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Blagin, Evgeny, Alexandr Dovgyallo, and Dmitry Uglanov. "Study of Different Factors Influence on Thermocompressor Performance." MATEC Web of Conferences 108 (2017): 04001. http://dx.doi.org/10.1051/matecconf/201710804001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Ji, Wei, Xiaodai Xue, Junjie Wang, Yuan Zhou, Liubiao Chen, and Wenxiu Zhu. "Coupling study of a novel thermocompressor driven pulse tube refrigerator." Applied Thermal Engineering 51, no. 1-2 (2013): 630–34. http://dx.doi.org/10.1016/j.applthermaleng.2012.10.034.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Pechenegov, Yu Ya, V. V. Oliskevich, and A. V. Tsaryunov. "Energy Efficient Steam Atmospheric Dryer with Thermocompressor for Wastewater Sludge Dehydration." Chemical and Petroleum Engineering 57, no. 7-8 (2021): 543–50. http://dx.doi.org/10.1007/s10556-021-00973-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Itoh, Yuri. "Energy Saving by Introduction of Thermocompressor to the Container Board Machine." JAPAN TAPPI JOURNAL 70, no. 4 (2016): 363–67. http://dx.doi.org/10.2524/jtappij.70.363.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Kiranoudis, C. T., M. K. Krokida, and Z. B. Maroulis. "THERMOCOMPRESSOR DESIGN FOR EFFICIENT ENERGY RECOVERY OF PAPER PRODUCTION PLANT DRYERS." Drying Technology 17, no. 6 (1999): 1065–80. http://dx.doi.org/10.1080/07373939908917594.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Udjianto, Tjatur, Teguh Sasono, Erwin Yusuf, and Rizky Mutiarani. "Pemanfaatan Thermocompressor Metode CRMC Sebagai Upaya Penghematan Energi di Pabrik Kertas." JTERA (Jurnal Teknologi Rekayasa) 8, no. 1 (2023): 97. http://dx.doi.org/10.31544/jtera.v8.i1.2022.97-106.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Piskun, I. M., and G. N. Abaev. "Method for Thermocompressor Analysis Using Sliding-Vane Vacuum Compressor and Jet Blower." Chemical and Petroleum Engineering 49, no. 1-2 (2013): 3–13. http://dx.doi.org/10.1007/s10556-013-9695-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Prokopov, M., S. Sharapov, Yu Merzlyakov, and D. Gusev. "The energy efficiency concept and implementation prospects of the jet thermocompression principle in small heat energy." Energy and automation, no. 2(54) (June 22, 2021): 39–51. http://dx.doi.org/10.31548/energiya2021.02.039.

Full text

Abstract:

The expediency of the implementation of the principle of steam thermal compression to improve the energy efficiency of sources of electricity and heat supply of small heat power engineering is substantiated. The results of thermodynamic analysis and numerical optimization of the parameters of the compressor steam-turbine cycle of a small cogeneration power plant are presented. A jet step-down thermotransformer has been tested - as an alternative to traditional boiler heating. On the basis of the conducted thermodynamic analysis, a new combined cycle of a step-down thermotransformer has been de

APA, Harvard, Vancouver, ISO, and other styles

18

Jin, Chang-Fu, Young-Ho Song, Kyung-Keun Kim, Gi-Tae Park, Han-Shik Chung, and Du-Youl Choi. "A Study on the Diffuser Inlet Shape of Thermocompressor for MED Desalination Plant." Journal of the Korean Society of Marine Engineering 32, no. 6 (2008): 869–76. http://dx.doi.org/10.5916/jkosme.2008.32.6.869.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Thomas, Seth, and Eric J. Barth. "Active Stirling Thermocompressor: Modelling and effects of controlled displacer motion profile on work output." Applied Energy 327 (December 2022): 120084. http://dx.doi.org/10.1016/j.apenergy.2022.120084.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Wang, Jue, Changzhao Pan, Kaiqi Luo, Liubiao Chen, Junjie Wang, and Yuan Zhou. "Thermal analysis of Stirling thermocompressor and its prospect to drive refrigerator by using natural working fluid." Energy Conversion and Management 177 (December 2018): 280–91. http://dx.doi.org/10.1016/j.enconman.2018.09.068.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Dijk, Marc van, Daniel Nouws, Olaf van Baal, and Marco de Vries. "Reduction condenser losses by use of flexible thermocompression evaporation section." Sugar Industry international, September 29, 2024, 662–68. http://dx.doi.org/10.36961/si32324.

Full text

Abstract:

In 2017, following an expansion of the evaporation with 6 to 7 effects, Cosun Beet Company Dinteloord invested in a thermocompression system to further minimize the condenser losses of the evaporation. The thermocompresssion system consisted of 4 thermocompressors of different sizes, which could cover a range of 0 to 45 t/h of vapor 3 from the evaporation section to exhaust steam conditions. After some start-up problems in the first campaign, this investment has proven a cost-effective solution to further reduce the fluctuating condenser losses. In this paper the concept of the flexible thermo

APA, Harvard, Vancouver, ISO, and other styles

22

Fischer, Fabian, and Hans-Detlev Kühl. "Generation of compressed air by overdriven free-displacer thermocompressors – Experimental investigation of a single stage." Applied Thermal Engineering, February 2024, 122712. http://dx.doi.org/10.1016/j.applthermaleng.2024.122712.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Fischer, Fabian, and Hans-Detlev Kühl. "Generation of compressed air by overdriven free-displacer thermocompressors – Experimental investigation of a three-stage cascade." Applied Thermal Engineering, August 2024, 124193. http://dx.doi.org/10.1016/j.applthermaleng.2024.124193.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

"4536258 Distilling apparatus operating on the thermocompressor principle." Journal of Heat Recovery Systems 6, no. 2 (1986): x. http://dx.doi.org/10.1016/0198-7593(86)90106-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Fischer, Fabian, and Hans-Detlev Kuehl. "Analytical model for an overdriven free-displacer thermocompressor." Applied Thermal Engineering, November 2020, 116251. http://dx.doi.org/10.1016/j.applthermaleng.2020.116251.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Blagin, Evgeny, Alexandr Dovgyallo, and Dmitry Uglanov. "Numerical Modeling of Non-stationary Processes in Cryogenic Mechanical Thermocompressor." International Journal of Mechanical Engineering and Robotics Research, 2017, 258–62. http://dx.doi.org/10.18178/ijmerr.6.4.258-262.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Fischer, Fabian, Sebastian Peveling, and Hans-Detlev Kühl. "Simulation and stability analysis of a thermocompressor cascade with overdriven free displacers." Thermal Science and Engineering Progress, July 2023, 102037. http://dx.doi.org/10.1016/j.tsep.2023.102037.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Akbarnejad, Saeed, and Masoud Ziabasharhagh. "A Study of the Application of Wet Steam Modeling for Thermocompressor Simulation in TVC Desalination." Desalination and Water Treatment, April 2024, 100289. http://dx.doi.org/10.1016/j.dwt.2024.100289.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Wang, Pengtao, Ahmed Abuheiba, Ramy Mohammed, et al. "Searching for Suitable Binary Fluid for an Ejector Heat Pump for Domestic Water Heating." Journal of Thermal Science and Engineering Applications, February 1, 2024, 1–24. http://dx.doi.org/10.1115/1.4064648.

Full text

Abstract:

Abstract Water heating is a major source of energy consumption in the US residential sector. Heat pumps can significantly increase the energy efficiency of water heating. An ejector heat pump (EHP) is a novel, thermally driven heat pump that uses an ejector as a thermocompressor. Choosing suitable working fluids is critical in developing high-performance EHPs. Therefore, this research screens binary fluid pairs (BFPs) for EHPs to produce domestic hot water at a high coefficient of performance (COP). The criteria for screening BFP candidates for EHP water heaters (EHPWHs) are established, and B

APA, Harvard, Vancouver, ISO, and other styles

30

Piri, Ahmad, Adel Rezvanivand Fanaei, and Vahid Rostampour. "Thermodynamic Analysis of a Continuous Vacuum Pan in the Crystallization Process of Sugar Beet Syrup." Journal of Food Processing and Preservation 2024, no. 1 (2024). http://dx.doi.org/10.1155/2024/2245675.

Full text

Abstract:

Due to the limitations of fossil resources, it is momentous to accurately assess the high‐energy consumption systems that could be used to improve the performance of these systems. The crystallization process directly affects particle size, purity, and product yield in the sugar industry. In this study, a continuous vacuum pan in the crystallization line, located in the Urmia sugar plant, was evaluated by energy and exergy analyses and compared with syrup concentration line evaporators. Mass, energy, and exergy balances were conducted via coding in EES software, and energetic and exergetic fun

APA, Harvard, Vancouver, ISO, and other styles

31

Majeed, Hamed Abdul, and Ting Wang. "Investigation of Flashing Flow in a Siphon to Extract Condensate in Paper Dryer Application." Journal of Thermal Science and Engineering Applications, October 30, 2020, 1–24. http://dx.doi.org/10.1115/1.4048972.

Full text

Abstract:

Abstract The paper industry uses steam to dry paper web through cylinder dryers. As steam condenses inside the dryer, the condensate is removed by means of either a stationary or a rotary siphon. However, during the siphoning process for transporting the condensate, flashing of the condensate occurs, which could cause backflow or discontinuity in the siphoning process. To resolve this flashing issue, two approaches have been employed: (a) increasing the amount of steam supplied to the cylinder to “blow-through- the stalled condensate-steam mixture and (b) reducing the back pressure by inducing

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!