To see the other types of publications on this topic, follow the link: Thermogasdynamic calculation.

Journal articles on the topic 'Thermogasdynamic calculation'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 22 journal articles for your research on the topic 'Thermogasdynamic calculation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Ben, N., S. Ryzhkov, A. Topalov, et al. "Efficiency Improvement of a Centrifugal Compressor Stage with the Parametric Optimization of the Impeller Blades." Journal of Applied Engineering Sciences 12, no. 2 (2022): 159–66. http://dx.doi.org/10.2478/jaes-2022-0021.

Full text
Abstract:
Abstract This work relates to the energy industry, in particular, complements the existing knowledge about a problem of increasing the overall efficiency of a centrifugal compressor stage by improving the geometric parameters of an impeller. The design features of the centrifugal compressors are analysed and the issues of their general modelling are considered in the article. The aim of the work is to increase the efficiency of the centrifugal compressor stage by improving the method of thermogasdynamic calculation with an extended determination of the number of its thermogasdynamic gas parame
APA, Harvard, Vancouver, ISO, and other styles
2

Berdnik, A. N., and V. O. Remeslovskiy. "MATHEMATICAL MODELING OF THERMOGASDYNAMIC PROCESSES IN PISTON ENGINES." Spravochnik. Inzhenernyi zhurnal, no. 291 (June 2021): 12–17. http://dx.doi.org/10.14489/hb.2021.06.pp.012-017.

Full text
Abstract:
A method for calculating the non-stationary gas flow in the exhaust pipeline of a piston engine by the method of solitary waves of finite amplitude is presented. The comparison of experimental data and calculation results by the method of characteristics and obtained when considering the process of propagation of solitary waves through the exhaust pipeline of a piston engine equipped with a pulsed turbocharging system is shown.
APA, Harvard, Vancouver, ISO, and other styles
3

Maksimov, A. D., and S. A. Shustov. "On the efficiency of using the Navier-Stokes approximation in thermogasdynamic calculation of low-thrust liquid-propellant rocket engines at low Reynolds numbers." VESTNIK of Samara University. Aerospace and Mechanical Engineering 21, no. 1 (2022): 67–80. http://dx.doi.org/10.18287/2541-7533-2022-21-1-67-80.

Full text
Abstract:
A numerical method for thermogasdynamic calculation of low-thrust liquid rocket engines is presented. These engines are used as end organs of the system of space attitude control for nanosatellites and small spacecraft. The method is based on the use of the TERRA software package for thermodynamic calculation and the Ansys CFX software package for gas-dynamic calculation using the Navier-Stokes equations. The results of the thermogasdynamic calculation, as well as the flow pattern of the working fluid in the chamber, are presented. The results of validating the described method are also presen
APA, Harvard, Vancouver, ISO, and other styles
4

Boyko, Ludmila, Vadym Datsenko, Aleksandr Dyomin, and Nataliya Pizhankova. "Devising a method for calculating the turboshaft gas turbine engine performance involving a blade-by-blade description of the multi-stage compressor in a two-dimensional setting." Eastern-European Journal of Enterprise Technologies 4, no. 8(112) (2021): 59–66. http://dx.doi.org/10.15587/1729-4061.2021.238538.

Full text
Abstract:
The design and adjustment of modern gas turbine engines significantly rely on the use of numerical research methods. This paper reports a method devised for calculating the thermogasdynamic parameters and characteristics of a turboshaft gas turbine engine. The special feature of a given method is a two-dimensional blade-by-blade description of the compressor in the engine system. Underlying the calculation method is a nonlinear mathematical model that makes it possible to describe the established processes occurring in individual nodes and in the engine in general. To build a mathematical mode
APA, Harvard, Vancouver, ISO, and other styles
5

Ludmila, Boyko, Datsenko Vadym, Dyomin Aleksandr, and Pizhankova Nataliya. "Devising a method for calculating the turboshaft gas turbine engine performance involving a blade-by-blade description of the multi-stage compressor in a two-dimensional setting." Eastern-European Journal of Enterprise Technologies 4, no. 8 (112) (2021): 59–66. https://doi.org/10.15587/1729-4061.2021.238538.

Full text
Abstract:
The design and adjustment of modern gas turbine engines significantly rely on the use of numerical research methods. This paper reports a method devised for calculating the thermogasdynamic parameters and characteristics of a turboshaft gas turbine engine. The special feature of a given method is a two-dimensional blade-by-blade description of the compressor in the engine system. Underlying the calculation method is a nonlinear mathematical model that makes it possible to describe the established processes occurring in individual nodes and in the engine in general. To build a mathematical mode
APA, Harvard, Vancouver, ISO, and other styles
6

Berliand, M., and R. Ishchenko. "CALCULATION OF THE EXPANSION PROCESS OF THE FLOW OF WORKING BODY IN THE NOZZLE OF A LIQUID-PHASE NUCLEAR ROCKET ENGINE." Slovak international scientific journal, no. 95 (May 15, 2025): 86–92. https://doi.org/10.5281/zenodo.15427667.

Full text
Abstract:
In this work, flow parameters of the working body (hydrogen) were calculated at the inlet, throat, and exit sections of the liquid-phase nuclear rocket engine nozzle. A method was proposed for determining the specific impulse of thrust while accounting for losses due to scattering, friction, and variations in the specific enthalpy of the working body caused by non-adiabatic effects. The calculated specific impulse exceeded 9500 m/s, significantly surpassing the performance of chemical rocket engines. The evaluation of the thermogasdynamic parameters of the working body expansion confirmed the
APA, Harvard, Vancouver, ISO, and other styles
7

Tkachenko, A. Yu, and I. N. Krupenich. "Development of a virtual prototype of gasturbine engine at the stage of conceptual thermogasdynamic designusing the CAE-system «ASTRA»." VESTNIK of Samara University. Aerospace and Mechanical Engineering, no. 3-2(34) (April 18, 2014): 333–42. http://dx.doi.org/10.18287/2541-7533-2012-0-3-2(34)-333-342.

Full text
Abstract:
Computer-aided system of gas turbine engine calculation and analysis (ASTRA) developed at the Aircraft Engine Theory department of Samara State Aerospace University is described. Its functional capabilities and development of gas turbine engine simulators for various initial-stage design tasks are described.
APA, Harvard, Vancouver, ISO, and other styles
8

Aleksandrov, Yuri, Nguyen The Dat, and Bilal Mingazov. "DETERMINATION OF HYDRAULIC LOSSES BASED ON FLOW SIMULATION IN THE ELEMENTS OF THE COMBUSTION CHAMBER OF A GAS TURBINE ENGINE." Perm National Research Polytechnic University Aerospace Engineering Bulletin, no. 65 (2021): 7–16. http://dx.doi.org/10.15593/2224-9982/2021.65.01.

Full text
Abstract:
The article presents the results of the study of hydraulic characteristics using the example of the combustion chamber of the aircraft engine PS-90A. A mathematical model of gas dynamics of the combustion chamber based on the equations of one-dimensional stationary flow is considered. In a one-dimensional formulation, the change in parameters along the path of the combustion chamber is analyzed for various modes of engine operation, from idle to takeoff. The boundary conditions for each model were obtained based on the results of thermogasdynamic calculations. All modes of operation of the com
APA, Harvard, Vancouver, ISO, and other styles
9

Senchev, M. N., I. A. Zubrilin, A. A. Yurtaev, М. A. Benedyuk, and Yu V. Komisar. "Simulation of the processes of spraying and combustion of kerosene and liquid oxygen in the chamber of a liquid-propellant rocket engine." VESTNIK of Samara University. Aerospace and Mechanical Engineering 23, no. 4 (2024): 167–79. https://doi.org/10.18287/2541-7533-2024-23-4-167-179.

Full text
Abstract:
The paper presents the results of simulation of spray and combustion processes in the liquid-propellant rocket engine chamber using the z77 reduced kinetic mechanism of chemical reactions and a hybrid method for determining spray parameters of a swirl atomizer. Simulation was carried out for the nominal operational conditions in a three-dimensional domain using the ANSYS Fluent software. The process of spraing liquid fuel components (T-1 kerosene and oxygen) by monopropellant injectors was simulated using a model of discontinuous phases. The simulation results (pressure, temperature and veloci
APA, Harvard, Vancouver, ISO, and other styles
10

Бойко, Людмила Георгиевна, Олег Владимирович Кислов та Наталия Владимировна Пижанкова. "МЕТОД РАСЧЕТА ТЕРМОГАЗОДИНАМИЧЕСКИХ ПАРАМЕТРОВ ТУРБОВАЛЬНОГО ГТД НА ОСНОВЕ ПОВЕНЦОВОГО ОПИСАНИЯ ЛОПАТОЧНЫХ МАШИН. ЧАСТЬ 1. ОСНОВНЫЕ УРАВНЕНИЯ". Aerospace technic and technology, № 1 (25 лютого 2018): 48–58. http://dx.doi.org/10.32620/aktt.2018.1.05.

Full text
Abstract:
Gas turbine engines processes mathematic simulations are widely used in different steps of its living cycle. All engine simulations may be divided into different difficulty levels: higher simulation level allows doing a more pre­cise description of physical processes in main units of gas turbine engines and their elements. It gives the oppor­tunity for getting better arrangement of calculation results and experimental data, reduce the quality of factors, which are traditionally used in determine engine operational characteristics with 1-level models.The purpose of the article is to describe th
APA, Harvard, Vancouver, ISO, and other styles
11

Коновалов, Дмитро Вікторович, Роман Миколайович Радченко, Сергій Георгійович Фордуй, Віктор Павлович Халдобін, Олексій Олегович Зєліков та Олександр Анатолійович Різун. "ВДОСКОНАЛЕННЯ ТЕПЛОВИКОРИСТОВУЮЧИХ ЕЖЕКТОРНИХ ХОЛОДИЛЬНИХ МАШИН ЗАСТОСУВАННЯМ АЕРОТЕРМОПРЕСОРНИХ ТЕХНОЛОГІЙ". Aerospace technic and technology, № 1 (26 лютого 2021): 60–66. http://dx.doi.org/10.32620/aktt.2021.1.06.

Full text
Abstract:
The paper shows and analyzes circuit solutions for improving the existing schemes of ejector heat-using refrigeration machines, which are used as part of cogeneration plants. One of the promising areas is the use of an aerothermopressor, which implements the effect of thermogasdynamic compression, which is to increase the pressure while reducing the temperature in the evaporation of liquid, which injected into the flow of vapor moving at speed near the sound. To analyze the efficiency of ejector refrigeration machines, the developed calculation model was used, which takes into account the use
APA, Harvard, Vancouver, ISO, and other styles
12

Ahmed, Heersh, and Boris Osipov. "MULTI-MODE IDENTIFICATION OF OBTAINING THE ADEQUATE MODEL OF TURBOJET ENGINE TJ-100A-Z FOR DIAGNOSTICS BY THERMALGASDYNAMIC PARAMETERS." Perm National Research Polytechnic University Aerospace Engineering Bulletin, no. 60 (2020): 5–14. http://dx.doi.org/10.15593/2224-9982/2020.60.01.

Full text
Abstract:
When monitoring and diagnosing the state of gas turbine engines by thermodynamic parameters, adequate mathematical models of these engines are used. This name means diagnostic methods based on special processing and analysis of the values of thermogasdynamic and other parameters measured on a working turbojet engine [1] using its mathematical model. The most important in the system of technical diagnostics is the mathematical model of the engine. Its creation is a problem since, as a rule, the specifications of engine components are not given in the technical documentation. In this regard, obt
APA, Harvard, Vancouver, ISO, and other styles
13

Datsenko, Vadym. "Виявлення впливу шорсткості та радіального зазору на характеристику осьового багатоступеневого компресора". Aerospace Technic and Technology, № 3 (20 червня 2024): 51–58. http://dx.doi.org/10.32620/aktt.2024.3.04.

Full text
Abstract:
The operation of gas turbine engines inevitably increases the blade roughness and tip clearance in multistage axial compressors. The result is an increase in its thermogasodynamic parameters. The reason for the increase in the roughness of the blades and the tip clearance can be various factors: clogging of the flow part of the compressor (adhesion and deposition of dust on the surface of the blades), erosion due to the arrival of hard sand grains in the flow part, etc. The subject of this study is thermogasodynamic processes in the flow part of a multistage axial compressor, based on the pres
APA, Harvard, Vancouver, ISO, and other styles
14

Коновалов, Дмитро Вікторович, та Галина Олександрівна Кобалава. "ЧИСЕЛЬНЕ МОДЕЛЮВАННЯ ПРОТОЧНОЇ ЧАСТИНИ МАЛОВИТРАТНОГО АЕРОТЕРМОПРЕСОРА ДЛЯ ПРОМІЖНОГО ОХОЛОДЖЕННЯ ЦИКЛОВОГО ПОВІТРЯ ГАЗОТУРБІННОГО ДВИГУНА". Aerospace technic and technology, № 4 (31 серпня 2019): 31–38. http://dx.doi.org/10.32620/aktt.2019.4.06.

Full text
Abstract:
A cyclic air intercooling application in the compression process in the compressor has a positive effect on the resource of the gas turbine plant (GTP) and on increasing its capacity without reducing the service life. The most promising method of cooling the cyclic air of the GTP, namely contact cooling by using an aerothermopressor, was analyzed in the paper. This heat exchanger is a two-phase jet apparatus in which, due to the removal of heat from the airflow, the air pressure is increased and its cooling occurs. The main problem in the development of the aerothermopressor is to determine th
APA, Harvard, Vancouver, ISO, and other styles
15

Радченко, Микола Іванович, Дмитро Вікторович Коновалов та Галина Олександрівна Кобалава. "АНАЛІЗ ЕФЕКТИВНОСТІ ПРОМІЖНОГО ОХОЛОДЖЕННЯ ПОВІТРЯ ГАЗОТУРБІННИХ УСТАНОВОК УПОРСКУВАННЯМ ВОДИ АЕРОТЕРМОПРЕСОРОМ". Aerospace Technic and Technology, № 4 (27 серпня 2017): 106–11. http://dx.doi.org/10.32620/aktt.2017.4.14.

Full text
Abstract:
The comparative analysis of conventional schemes of gas turbine units of simple and complex cycles with intermediate air cooling by water injection and proposed schemes with aerothermopressor is carried out. A principle of cooling with the use of aerothermopressor effect, or so called, thermogasdynamic compression, is in increase of gas (air) pressure during instantaneous evaporation of water, injected into gas (air) stream accelerated up about to the sound velocity. The results of calculations has shown that the use of aerothermopressor allows to increase the efficiency of the gas turbine uni
APA, Harvard, Vancouver, ISO, and other styles
16

Tkachenko, Andrey, Ilia Krupenich, Evgeny Filinov, and Yaroslav Ostapyuk. "Automated Virtual Testing Rig Incorporating Multi-level Models of Gas Turbine Engines." MATEC Web of Conferences 220 (2018): 03001. http://dx.doi.org/10.1051/matecconf/201822003001.

Full text
Abstract:
This article describes the multi-level approach to developing the virtual testing rig of gas turbine engines and power plants. The described virtual rig is developed on the basis of computer-aided system of thermogasdynamic calculations and analysis ASTRA, developed at Samara National Research University. Existing testing rig is widely used in educational process to supply the students’ research activities with the information on engine operation in a variety of ambient and flight conditions during transients. An approach to upgrading the virtual testing rig is proposed. The described modifica
APA, Harvard, Vancouver, ISO, and other styles
17

Usatyi, Oleksandr, Olena Avdieieva, Ihor Palkov, Sergii Palkov, and Oleh Ishchenko. "Optimization and Comparison of Two Technologies for the Manufacture of Blades for Flow path HPC Turbine K-330-23.5." NTU "KhPI" Bulletin: Power and heat engineering processes and equipment, no. 1 (October 28, 2021): 5–14. http://dx.doi.org/10.20998/2078-774x.2021.01.01.

Full text
Abstract:
The article presents the results of multiparameter optimization of the structural and thermogasdynamic parameters of the flow path of the HPC K-330-23.5, obtained using the developed CAD “Turboagregat”. The found 12 optimal solutions for the flow path of the HPCK-330-23.5 make it possible not only to assess the effect of the design parameters and the number of blades of the HPC stages on the HPC efficiency, but also to carry out a comparative analysis of two technological approaches to manufacturing the rotor blades – with and without trimming the initial edges. Calculations have confirmed the
APA, Harvard, Vancouver, ISO, and other styles
18

Ambrozhevich, Maya Vladimirovna, and Mikhail Anatol'evich Shevchenko. "EQUATIONS OF AVERAGE ISOBARIC HEAT CAPACITY OF AIR AND COMBUSTION GASES WITH INFLUENCE OF PRESSURE AND EFFECT OF THERMAL DISSOCIATION." Aerospace technic and technology, no. 2 (April 22, 2019): 18–29. http://dx.doi.org/10.32620/aktt.2019.2.02.

Full text
Abstract:
All properties of thermomechanical systems working substance are two-parameter that is determined by two parameters, the most often they are temperature and pressure which are easily measured by experiment. Representing the isobaric heat capacity as a function of temperature cp = f(T) become a thing of the past. Analytical and tabular ways are used to represent dependencies as a function of temperature and pressure. The tabular method is convenient for single calculations, but the analytical one is more convenient for a series of calculations. The advantages of an analytical description in com
APA, Harvard, Vancouver, ISO, and other styles
19

Sherfedinov, Riza, Oleksandr Usatyi, and Olena Avdieieva. "Information and Mathematical Models of the Flow Part in the Problems of Optimal Design of a Turboblock." NTU "KhPI" Bulletin: Power and heat engineering processes and equipment, no. 1-2 (December 28, 2022): 32–39. http://dx.doi.org/10.20998/2078-774x.2022.01.04.

Full text
Abstract:
The issues of improving the structural-topological formation of the information model of the flow path of a steam turbine with the aim of using it in the problems of optimal design of turbine blocks are considered. A new hierarchical level "Compartment" has been added, which made it possible to link in a single information space the parameters of the frequency converter and the rest of the equipment of the turbine unit and made it possible to set and solve the problems of optimal design of turbine blocks. An improved one-dimensional model of the processes in the frequency converter, which allo
APA, Harvard, Vancouver, ISO, and other styles
20

Барышева, Елена Серафимовна, Александр Евгеньевич Дёмин та Роман Леонидович Зеленский. "МОДЕЛЮВАННЯ ХАРАКТЕРИСТИК БАГАТОСТУПЕНЕВОГО ВІСЬОВОГО КОМПРЕСОРА АВІАЦІЙНОГО ДВИГУНА З УРАХУВАННЯМ ЕРОЗІЙНОГО ЗНОСУ ЛОПАТОК". Aerospace Technic and Technology, № 6 (12 серпня 2017): 58–64. http://dx.doi.org/10.32620/aktt.2017.6.08.

Full text
Abstract:
In developing of methods for diagnostic based on the parameters of the working process of the flow-through part of aviation gas turbine engines, the development of the working process thermogasdynamic model for the engine is the main task. Math modeling of various types of defects of engine elements is carried out by introducing into the model the changed characteristics of these units, which makes it possible to determine the change of parameters which are recorded in operation. With the help of such a model it is possible to assess the technical state de the deviations of the measured parame
APA, Harvard, Vancouver, ISO, and other styles
21

Boyko, Lyudmila, та Nataliya Pizhankova. "Метод розрахунку термогазодинамічних параметрів турбовального ГТД на підставі повінцевого опису лопаткових машин. Частина ІІІ. Визначення параметрів турбіни". Aerospace Technic and Technology, № 3 (23 травня 2025): 49–59. https://doi.org/10.32620/aktt.2025.3.05.

Full text
Abstract:
Blade-to-blade modeling of turbomachinery, based on methods for developing the parameters and characteristics of modern gas turbine engines, enables the resolution of a wide range of theoretically and practically significant problems in engine design, development, and operation. It also improves the accuracy of performance calculations. This article investigates thermogasdynamic processes within the flow part of a gas turbine engine and its elements, focusing in particular on a multi-stage gas turbine. The study is based on a method for developing the parameters and operational characteristics
APA, Harvard, Vancouver, ISO, and other styles
22

Nguyen, Dung Van, and Viet Quy Bui. "The effect of muzzle devices on the distribution of muzzle waves when firing an assault rifle." Archive of Mechanical Engineering, September 26, 2024. http://dx.doi.org/10.24425/ame.2024.151332.

Full text
Abstract:
When firing an infantry gun, the muzzle wave will spread into the surrounding space, which will cause harmful mechanical effects to the shooter and military personnel near the weapon. The impact of the muzzle wave on the shooter is increased when a muzzle device is placed on the barrel of the gun. Therefore, weapon designers desire to improve the efficiency of muzzle devices and limit the mechanical impact of the muzzle wave on the shooter's hearing organs. This article discusses a thermogasdynamic method for determining the changes in excess pressure distribution of the muzzle wave and sound
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!