Relevant bibliographies by topics / Thiessen Polygon

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Thiessen Polygon'

Author: Grafiati
Published: 4 June 2021
Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Thiessen Polygon.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Thiessen Polygon"

1

William, Kevin Hendra, and Kristoko Dwi Hutomo. "The Natural Disaster Prone Index Map Model in Indonesia Using the Thiessen Polygon Method." INTENSIF: Jurnal Ilmiah Penelitian dan Penerapan Teknologi Sistem Informasi 5, no. 2 (2021): 148–60. http://dx.doi.org/10.29407/intensif.v5i2.14612.

Full text
Abstract:
Natural Disasters are natural phenomena that occur at any moment that can cause loss. Indonesia is an archipelagic country located at the meeting of four tectonic plates and volcanic belts. This condition causes Indonesia to be prone to natural disasters. Therefore, it is necessary to make a natural disaster-prone index map model minimize the impact of natural disasters. In this research, the researchers used a Polygon Thiessen method for it was one of the mapping methods to determine a natural disaster based on Indonesia's vast surface and many disasters. The BNPB and Polygon Thiessen data comparison shows that BNPB data has a low level of vulnerability of 302, a moderate level of vulnerability of 148, and a high level of vulnerability of 58. In contrast, the Thiessen polygon has a low level of vulnerability of 297, a moderate vulnerability of 158, and a high vulnerability of 59. Comparing BNPB data and the Thiessen Polygon method found five differences from 40 data in the Papua region. Suggestions for further research to create an application-based information system so that it can be accessed in real-time.
APA, Harvard, Vancouver, ISO, and other styles
2

Akgül, Mehmet Ali, and Hakan Aksu. "Areal Precipitation Estimation Using Satellite Derived Rainfall Data over an Irrigation Area." Turkish Journal of Agriculture - Food Science and Technology 9, no. 2 (2021): 386–94. http://dx.doi.org/10.24925/turjaf.v9i2.386-394.4061.

Full text
Abstract:
The average precipitation on the irrigation field can be estimated from the Meteorology Observation Stations by using spatial interpolation methods such as Thiessen polygon and isohyetal curves. However, the fact that precipitation doesn't occur homogenous in spatial scales, spatial interpolation methodologies need a large number of meteorology stations for more accurate results. In recent years, remote sensing methods have diversified to estimate precipitation. In this study, performance of the satellite-based precipitation data was assessed to determine areal precipitation over an irrigation area. This study was conducted over left bank irrigation area located in the Çukurova Plain of Turkey. Relationship between CHIRPS satellite based on monthly precipitation data and 4 meteorology stations’ data were analyzed. Determination coefficients (R2) of the stations were found between 0.64 and 0.77, for point based comparison, R2 was calculated as 0.84 with Thiessen polygon method. It is concluded that the precipitation amount in the irrigated area can be estimated as accurately as classical methods such as Thiessen polygon with satellite-based precipitation data.
APA, Harvard, Vancouver, ISO, and other styles
3

Wei, Liu, Hai Yan Chen, Li Li, Hai Ming Fu, and Li Wei. "Application of Thiessen Polygon Algorithm in Cellular Network Simulation System." Advanced Materials Research 532-533 (June 2012): 1851–56. http://dx.doi.org/10.4028/www.scientific.net/amr.532-533.1851.

Full text
Abstract:
Cellular mobile communication system divides the service area into several adjacent cells; each cell sets up a base station. In the traditional cellular representation, we always use regular hexagon to represent the cell. In the practical engineering applications and wireless network planning simulation systems, as the programming environment is complex and diverse, using the regular hexagon to represent the cellular network has limitation. This paper used Thiessen polygon and spatial analysis method to describe the cell service area with a polygon. This method intuitively displayed the relationship between the scope of service and its place with each other in space. For the Pre-construction and later optimization of wireless network planning it has a positive role.
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Shuwei, Lishan Sun, Jian Rong, and Zifan Yang. "Transit Traffic Analysis Zone Delineating Method Based on Thiessen Polygon." Sustainability 6, no. 4 (2014): 1821–32. http://dx.doi.org/10.3390/su6041821.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jordan, L. "APPLYING THIESSEN POLYGON CATCHMENT AREAS AND GRIDDED POPULATION WEIGHTS TO ESTIMATE CONFLICT-DRIVEN POPULATION CHANGES IN SOUTH SUDAN." ISPRS Annals of Photogrammetry, Remote Sensing and Spatial Information Sciences IV-4/W2 (October 19, 2017): 23–30. http://dx.doi.org/10.5194/isprs-annals-iv-4-w2-23-2017.

Full text
Abstract:
Recent violence in South Sudan produced significant levels of conflict-driven migration undermining the accuracy and utility of both national and local level population forecasts commonly used in demographic estimates, public health metrics and food security proxies. This article explores the use of Thiessen Polygons and population grids (Gridded Population of the World, WorldPop and LandScan) as weights for estimating the catchment areas for settlement locations that serve large populations of internally displaced persons (IDP), in order to estimate the county-level in- and out-migration attributable to conflict-driven displacement between 2014-2015. Acknowledging IDP totals improves internal population estimates presented by global population databases. Unlike other forecasts, which produce spatially uniform increases in population, accounting for displaced population reveals that 15 percent of counties (<i>n</i> = 12) increased in population over 20 percent, and 30 percent of counties (<i>n</i> = 24) experienced zero or declining population growth, due to internal displacement and refugee out-migration. Adopting Thiessen Polygon catchment zones for internal migration estimation can be applied to other areas with United Nations IDP settlement data, such as Yemen, Somalia, and Nigeria.
APA, Harvard, Vancouver, ISO, and other styles
6

Yang, Guang, and Wei Li Jiao. "An Optimization Method on Ground Control Point Distribution." Advanced Materials Research 268-270 (July 2011): 1092–95. http://dx.doi.org/10.4028/www.scientific.net/amr.268-270.1092.

Full text
Abstract:
With the development of remote sensing, the data quantity of remote sensing image is increasing tremendously. It brings a huge workload to the image geometric correction through manual ground control point (GCP) selection. GCPs automatically selected based on software is one of the effective methods to cut down manual operation. The GCPs obtained from that way is generally redundant. This paper deeply comprehends some existing methods about automatic optimization of GCP, and puts forward a new method of automatic optimization of GCP based on Thiessen Polygon to filter ground control points from the overfull ones without manual subjectivity for better accuracy. Experiments in this paper also demonstrated the relationship between the accuracy of geometric correction and the distribution of GCP. It advances the conception of single GCP’s importance value based on Thiessen Polygon. The paper gives the theory and the flow of automatic optimization of GCPs as well. It also presents an example of the application of this method. In the conclusion, this paper points out the advantages of this method .
APA, Harvard, Vancouver, ISO, and other styles
7

Argamosa, R. J. L., E. C. Paringit, K. R. Quinton, et al. "FULLY AUTOMATED GIS-BASED INDIVIDUAL TREE CROWN DELINEATION BASED ON CURVATURE VALUES FROM A LIDAR DERIVED CANOPY HEIGHT MODEL IN A CONIFEROUS PLANTATION." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B8 (June 23, 2016): 563–69. http://dx.doi.org/10.5194/isprsarchives-xli-b8-563-2016.

Full text
Abstract:
The generation of high resolution canopy height model (CHM) from LiDAR makes it possible to delineate individual tree crown by means of a fully-automated method using the CHM’s curvature through its slope. The local maxima are obtained by taking the maximum raster value in a 3 m x 3 m cell. These values are assumed as tree tops and therefore considered as individual trees. Based on the assumptions, thiessen polygons were generated to serve as buffers for the canopy extent. The negative profile curvature is then measured from the slope of the CHM. The results show that the aggregated points from a negative profile curvature raster provide the most realistic crown shape. The absence of field data regarding tree crown dimensions require accurate visual assessment after the appended delineated tree crown polygon was superimposed to the hill shaded CHM.
APA, Harvard, Vancouver, ISO, and other styles
8

Argamosa, R. J. L., E. C. Paringit, K. R. Quinton, et al. "FULLY AUTOMATED GIS-BASED INDIVIDUAL TREE CROWN DELINEATION BASED ON CURVATURE VALUES FROM A LIDAR DERIVED CANOPY HEIGHT MODEL IN A CONIFEROUS PLANTATION." ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B8 (June 23, 2016): 563–69. http://dx.doi.org/10.5194/isprs-archives-xli-b8-563-2016.

Full text
Abstract:
The generation of high resolution canopy height model (CHM) from LiDAR makes it possible to delineate individual tree crown by means of a fully-automated method using the CHM’s curvature through its slope. The local maxima are obtained by taking the maximum raster value in a 3 m x 3 m cell. These values are assumed as tree tops and therefore considered as individual trees. Based on the assumptions, thiessen polygons were generated to serve as buffers for the canopy extent. The negative profile curvature is then measured from the slope of the CHM. The results show that the aggregated points from a negative profile curvature raster provide the most realistic crown shape. The absence of field data regarding tree crown dimensions require accurate visual assessment after the appended delineated tree crown polygon was superimposed to the hill shaded CHM.
APA, Harvard, Vancouver, ISO, and other styles
9

Lewandowicz, Elżbieta, Przemysław Lisowski, and Paweł Flisek. "A Modified Methodology for Generating Indoor Navigation Models." ISPRS International Journal of Geo-Information 8, no. 2 (2019): 60. http://dx.doi.org/10.3390/ijgi8020060.

Full text
Abstract:
Automatic methods for constructing navigation routes do not fully meet all requirements. The aim of this study was to modify the methodology for generating indoor navigation models based on the Medial Axis Transformation (MAT) algorithm. The simplified method for generating corridor axes relies on the Node-Relation Structure (NRS) methodology. The axis of the modeled structure (corridor) is then determined based on the points of the middle lines intersecting the structure (polygon). The proposed solution involves a modified approach to the segmentation of corridor space. Traditional approaches rely on algorithms for generating Triangulated Irregular Networks (TINs) by Delaunay triangulation or algorithms for generating Thiessen polygons known as Voronoi diagrams (VDs). In this study, both algorithms were used in the segmentation process. The edges of TINs intersected structures. Selected midpoints on TIN edges, which were located in the central part of the structure, were used to generate VDs. Corridor structures were segmented by polygon VDs. The identifiers or structure nodes were the midpoints on the TIN edges rather than the calculated centroids. The generated routes were not zigzag lines, and they approximated natural paths. The main advantage of the proposed solution is its simplicity, which can be attributed to the use of standard tools for processing spatial data in a geographic information system.
APA, Harvard, Vancouver, ISO, and other styles
10

Nganro, Sudirman, Slamet Trisutomo, Roland A. Barkey, and Mukti Ali. "Rainfall Analysis of the Makassar City using Thiessen Polygon Method Based on GIS." Journal of Engineering and Applied Sciences 15, no. 6 (2020): 1426–30. http://dx.doi.org/10.36478/jeasci.2020.1426.1430.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Thiessen Polygon"

1

Tancreto, Amanda E. "Comparison of Hydrologic Model Performance Statistics Using Thiessen Polygon Rain Gauge and NEXRAD Precipitation Input Methods at Different Watershed Spatial Scales and Rainfall Return Frequencies." UNF Digital Commons, 2015. http://digitalcommons.unf.edu/etd/584.

Full text
Abstract:
As hydrological computer modeling software continues to increase in complexity, the need for further understanding of the value of different model input datasets becomes apparent. Frequently used precipitation model input include rain gauge data and next-generation radar–based (NEXRAD) rainfall data. Rain gauge data are usually interpolated across a model domain using various methods including the Thiessen Polygon methodology, which may be data-sparse in some areas and overly data-dense in others. However, rain gauge data are generally very easy to use in hydrologic model development, often requiring little to no data processing. NEXRAD data have the potential to improve hydrologic runoff estimates due to the increased spatial resolution of the data: but has its own issues regarding accuracy, false precipitation indications, and difficulties due to data processing. Previous studies have investigated the value of NEXRAD input versus traditional rain gauge data inputs for hydrologic studies; however, results are inconclusive as to which precipitation source provides more accurate results. Limited work has been done to compare the value of these datasets at multiple spatial scales, especially in Florida, a study area dominated by low topographic drive and sub-tropical weather. In addition, little to no research has been done regarding the value of NEXRAD versus rain gauge data inputs at different rainfall return frequencies. The proposed research will utilize a hydrological rain-runoff model (HEC-HMS) of the Upper St. Johns River Basin, Florida to compare the performance of the two precipitation data input types at various watershed spatial scales and rainfall return frequencies. Statistical analysis of the hydrological model “goodness-of-fit” results will be utilized to assess the watershed scaling and rainfall frequency requirements to xii which NEXRAD data provide little to no advantage over standard rain gauges using the Thiessen Polygon method for estimating rainfall totals across a model domain.
APA, Harvard, Vancouver, ISO, and other styles
2

GOMES, JUNIOR Daniel Lima. "Visualização de sistemas de potência com dados georreferenciados." Universidade Federal do Maranhão, 2010. http://tedebc.ufma.br:8080/jspui/handle/tede/1812.

Full text
Abstract:
Submitted by Rosivalda Pereira (mrs.pereira@ufma.br) on 2017-08-14T17:46:24Z No. of bitstreams: 1 DanielGomesJunior.pdf: 2504797 bytes, checksum: 884299d9ce4456c07e4e57e87a6a36d9 (MD5)<br>Made available in DSpace on 2017-08-14T17:46:24Z (GMT). No. of bitstreams: 1 DanielGomesJunior.pdf: 2504797 bytes, checksum: 884299d9ce4456c07e4e57e87a6a36d9 (MD5) Previous issue date: 2010-07-15<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)<br>This paper presents a study about the electric power systems visualization presenting as results: the implementation of the main visualization techniques used in the operation and control of these systems; a new representation of electrical magnitudes with the use of Thiessen polygons; and finally, the presentation of a new paradigm in information management and manipulation of the power system graphics in a three-dimensional environment. Moreover, it presents the architecture used in the construction of this threedimensional viewing environment, which in our work, enabled the creation of a virtual control room where operators can build and add to the virtual environment the wanted and available visualization in the management of the electric system, enabling the analysis of the problem from several di erent aspects.<br>Este trabalho apresenta um estudo sobre visualização de sistemas elétricos de potência e tem como resultados: a implementação das principais técnicas de visualização utilizadas no controle e operação destes sistemas; uma nova representação de grandezas elétricas com a utilização dos polígonos de Thiessen; e por fim, a apresentação de um novo paradigma no gerenciamento das informações e manipulação dos gréficos dos sistemas de potência em um ambiente tridimensional. Ademais, apresenta-se a arquitetura utilizada na construção deste ambiente de visualização tridimensional que, em nosso trabalho, possibilitou a criação de uma sala virtual de controle, na qual os operadores podem construir e adicionar ao ambiente virtual as visualizações desejadas e disponíveis no gerenciamento do sistema elétrico, possibilitando a análise do problema sob vários aspectos diferentes.
APA, Harvard, Vancouver, ISO, and other styles
3

Pereira, João Paulo. "Mensuração automática de copas de Araucaria angustifolia (Bertol.) Kuntze a partir de dados LiDAR para estimativa de variáveis dendrométricas." Universidade do Estado de Santa Catarina, 2014. http://tede.udesc.br/handle/handle/1927.

Full text
Abstract:
Made available in DSpace on 2016-12-12T20:12:29Z (GMT). No. of bitstreams: 1 PGEF14MA008.pdf: 3688775 bytes, checksum: 4a40e070e65e6367243d2ef1f2414666 (MD5) Previous issue date: 2014-07-25<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior<br>This paper aimed to automatic extract crowns of Araucaria angustifolia using LiDAR data and indirectly obtain dendrometric variables. To conduct the project, a LiDAR point cloud was used with an average density of 7 points/m², located in the city of Painel in Santa Catarina. Four subareas were selected so that only isolated trees would be considered. The laser scanning survey was conducted by the company Aeroimagem S/A from Curitiba, in January 2011 using a Leica ALS-60 system. In the fieldwork, isolated trees of A. angustifolia were measured to give the DBH, total height and 4 crown radius in the direction of the cardinal points. The fieldwork occurred in September and August 2013. To delineate the crowns, it was employed the segmentation methodology of Thiessen polygons. Each segment was measured in order to obtain the canopy diameter for each tree. For the calculation of dendrometric variables, linear regression was used to obtain the DBH as a function of the crown diameter. The total height was obtained directly from LiDAR data. Because of the seasonality between the LiDAR survey and fieldwork, it was necessary to apply a correction in LiDAR data using increment data of the species. Segmentation by Thiessen polygons reached an accuracy ranging between 75.2% and 91.7%. Estimating the 14 DBH the difference between the field was 3,1mm. For total height 0,19m was the difference between the data field and the LiDAR. Using the proposed methodology, it was possible to perform the measurement of the crowns of A. angustifolia and estimate dendrometric variables with satisfactory accuracy<br>Este trabalho tem como objetivo a medição automática de copas de Araucaria angustifolia utilizando dados LiDAR e indiretamente a obtenção de variáveis dendrométricas. Para a realização da pesquisa utilizou-se uma nuvem de pontos LiDAR com uma densidade média de 7 pontos/m², localizada no município de Painel em Santa Catarina. Quatro subáreas foram selecionadas para que fosse possível trabalhar apenas com árvores isoladas. O levantamento por varredura a LASER foi efetuado pela empresa Aeroimagem S/A de Curitiba, em janeiro de 2011 utilizando um sistema Leica ALS-60. No levantamento a campo, foram medidas árvores isoladas de A. angustifolia obtendo-se o DAP, altura total e 4 raios da copa na direção dos pontos cardeais. O levantamento à campo ocorreu em setembro e agosto de 2013. Para o delineamento das copas foi empregada a metodologia de segmentação de polígonos de Thiessen. Para o cálculo das variáveis dendrométricas, foi utilizado regressão linear para obter o DAP em função do diâmetro da copa. A altura pôde ser obtida diretamente dos dados LiDAR. Devido a sazonalidade entre o levantamento LiDAR e a coleta de dados a campo, foi necessário aplicar uma correção nos dados LiDAR utilizando dados de incremento da espécie. A segmentação por 12 polígonos de Thiessen atingiu uma acurácia que variou entre 75,2% e 91,7%. Na estimativa do DAP chegou-se a uma diferença de 3,1mm em relação ao campo. Para a altura total, 0,19m foi a diferença entre os dados a campo e o LiDAR. Utilizando a metodologia proposta, foi possível realizar a medição das copas de A. angustifolia e estimar as variáveis dendrométricas com precisão satisfatória
APA, Harvard, Vancouver, ISO, and other styles
4

Niti, Duggal. "Retail Location Analysis: A Case Study of Burger King & McDonald’s in Portage & Summit Counties, Ohio." Kent State University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=kent1196133312.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

PETRÁŠKOVÁ, Kateřina. "Stav a vývoj koncentrací nutrientů (dusík a fosfor) v podzemních vodách zájmového území." Master's thesis, 2015. http://www.nusl.cz/ntk/nusl-202629.

Full text
Abstract:
This diploma thesis deals with the comparison of the development of nitrates and phosphates in various regions of the Czech Republic. The thesis contains of the description of the circulation of groundwater and its importance to the human society, the circulation of nitrogen and phosphorus and their occurrence in waters. Further, this thesis incorporates the description of the development and the way of observation of the concentration of nitrates and phosphates in groundwater. The selection of observational objects and used methods for the evaluation of the concentrations are described in the thesis. The aim of the thesis is the determination of trends of the concentrations of nitrates and phosphates during time periods and the statistical evaluation of the progress of the concentrations in regional cities of the Czech Republic. The next part of the thesis deals with the spatial analysis of the concentrations of nitrates and phosphates in the region of České Budějovice. This area was chosen for its great amount of the observational objects with a long time period of measuring.
APA, Harvard, Vancouver, ISO, and other styles
6

SUCHÁ, Jitka. "Porovnání vývoje atmosférické depozice dusíku a fosforu v různých oblastech ČR." Master's thesis, 2014. http://www.nusl.cz/ntk/nusl-174209.

Full text
Abstract:
This thesis engages a comparison of the development of atmospheric deposition of nitrogen and phosphorus in different regions of the Czech Republic. The work explains the formation of atmospheric deposition and related terms such as the source of pollution, emissions, air pollution and nitrogen oxides. There are stated types of atmospheric deposition, sampling procedure and the process of determining the size of atmospheric deposition. This work describes the methods that were used in the calculations and evaluations. It also deals with the selection of suitable measuring stations for processing the development of atmospheric nitrogen deposition. The atmospheric deposition of phosphorus were not measured in the territory of the Czech Republic in the period from 2000 to 2010. The aim of this work is to find trends in time series of concentrations of NOx and statistical evaluation of the development of atmospheric nitrogen deposition. For these chapters were selected concentration of nitrogen oxides in the regional towns of the Czech Republic. In the chapter of spatial analyzes of the concentration of nitrogen oxides is selected Ústecký kraj, mainly due to the fact that this area is characterized by significantly high atmospheric deposition of nitrogen and total air pollution. A therm the Black Triangle is often used for this location.
APA, Harvard, Vancouver, ISO, and other styles
7

VÁVRA, Miroslav. "Výpočet prostorové distribuce srážek různými metodami a vyhodnocení rozdílu v úhrnech srážek na vybraném povodí." Master's thesis, 2013. http://www.nusl.cz/ntk/nusl-154479.

Full text
Abstract:
This thesis engages various methods of calculation of the spatial distribution of precipitation and the evaluation of differences in totals of rainfall in a chosen catchment. The aim of this work was to choose suitable methods for the calculation of areal rainfall and subsequently to create those methods. Most methods were developed in the GIS program. The next objective was to explore differences in monthly precipitation from hydrological years 2006 and 2007 calculated in the catchment by chosen methods. Chosen methods for the calculation of the spatial distribution of precipitation in the catchment were: arithmetic mean, Thiessen polygons, isohyetal method and inverse distance weighting method. (IDW). As a suitable catchment was selected the catchment of the Kopaninský stream where relatively dense rainfall measurement network is installed. During the solution of this thesis the area of interest had to be extended by the area between the used rain gauges which was delimited in the GIS program. The reason for an enlargement was a fact that a decomposition of rain gauges in the catchment of the Kopaninský stream did not permit the creation of isohyetal lines in this whole catchment. During the calculation and the comparison of results of individual methods was found that results of used methods were surprisingly nearly the same. It was also stated that not even sufficient dense rain gauges network does not guarantee 100% exactness for calculating the amount of the precipitation in the selected area because of their extraordinary variability.
APA, Harvard, Vancouver, ISO, and other styles
8

Raham, Djamel. "Les Structures Spatiales de l'Est Algérien. Les maillages territoriaux, urbains et routiers." Phd thesis, 2001. http://tel.archives-ouvertes.fr/tel-00288867.

Full text
Abstract:
L'analyse régionale est une investigation délicate puisqu'une région est un ensemble hétéroclite et complexe d'invariants et de paramètres, visibles ou invisibles, mobiles ou inertes, en relation continue et interdépendante. Cerner toutes les composantes spatiales d'une région donnée est presque du domaine de l'impossible; seulement, il faut que les facteurs pris en considération soient essentiels et déterminants et permettent donc de mettre en relief les principaux écarts et décalages qui caractérisent une région quelconque.<br />C'est ainsi que l'objectif qui a déterminé la démarche de notre étude a été d'essayer de dépeindre la configuration spatiale antérieure et actuelle de l'Algérie à travers sa partie orientale qui est "l'Est Algérien". Pour tenter d'y parvenir, nous avons pris en considération trois types de maillages qui sont les territoires (wilayas et communes), le réseau urbain (toute taille confondue) et le réseau des voies de communication avec la trame routière et le réseau ferroviaire. Pour chaque type de réseau (territoires, réseau urbain et voies de communication), il a été à chaque fois nécessaire de présenter son évolution depuis presque l'antiquité, d'étudier sa configuration actuelle puis de la confronter avec des modèles théoriques en utilisant des outils d'analyse et d'investigation mis au point dans ce contexte.<br />Il ressort cependant que quel que soit le réseau ou le maillage pris en considération, l'Est Algérien s'est toujours montré comme un exemple typique d'un espace qui présente des formes opposées identifiables quelle que soit la méthode d'analyse utilisée. Il en résulte ainsi que la région, c'est à dire l'Est Algérien, est dominée par deux systèmes spatiaux dualistes :<br />+ un système classique traditionnel caractérisant les régions périphériques (partie occidentale du Tell, sud des Hautes Plaines ou la Steppe, les Nememcha, la région du Hodna et l'Atlas Saharien) qui accusent souvent des retards et des décalages négatifs dans tous les domaines;<br />+ un système spatial hérité légué principalement par le pouvoir colonial et qui se présente globalement comme une région polarisée linéairement le long des principales voies de communication en reliant les villes les plus importantes.<br />Il s'agit en fait du modèle de la région anisotropique qui se présente sous la forme d'une succession de sous-régions polarisées autour de grands centres urbains et bien connectés par les voies de communication suivant un axe préferentiel. De part et d'autre de ce premier système hérité subsistent des sous-systèmes spatiaux marginaux.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Thiessen Polygon"

1

Boots, B. N. Voronoi (Thiessen) polygons. Geo Books, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Thiessen Polygon"

1

Shekhar, Shashi, and Hui Xiong. "Thiessen Polygons." In Encyclopedia of GIS. Springer US, 2008. http://dx.doi.org/10.1007/978-0-387-35973-1_1381.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mu, L. "Thiessen Polygon." In International Encyclopedia of Human Geography. Elsevier, 2009. http://dx.doi.org/10.1016/b978-008044910-4.00545-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mu, Lan. "Thiessen Polygon." In International Encyclopedia of Human Geography. Elsevier, 2009. http://dx.doi.org/10.1016/b978-0-08-102295-5.10613-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Thiessen Polygon Method." In Encyclopedic Dictionary of Archaeology. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-58292-0_200352.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"Thiessen Polygons." In Encyclopedia of Database Systems. Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-39940-9_3808.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"Thiessen Polygons." In Encyclopedia of GIS. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-17885-1_101387.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"Thiessen Polygons." In Encyclopedic Dictionary of Archaeology. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-58292-0_200353.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Thiessen Polygon"

1

Sun, Xia, Zao Li, Jin Li, and Maosheng Ye. "Investigation on the Primary School District using Thiessen Polygon." In 2015 International conference on Engineering Management, Engineering Education and Information Technology. Atlantis Press, 2015. http://dx.doi.org/10.2991/emeeit-15.2015.4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lei, Xiaohui, Xu Wang, Weihong Liao, Yu Tian, and Yunzhong Jiang. "Development of Adaptive Thiessen Polygon Method for Imperfect Observation Data." In 2010 Second Global Congress on Intelligent Systems (GCIS). IEEE, 2010. http://dx.doi.org/10.1109/gcis.2010.178.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Qing Zhou, Gang Liu, and Zhiting Zhang. "Improvement and optimization of Thiessen polygon method boundary treatment program." In 2009 17th International Conference on Geoinformatics. IEEE, 2009. http://dx.doi.org/10.1109/geoinformatics.2009.5293458.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Peng, Xiaoyan, and Lin Li. "The method study of building grid standard land price based on Thiessen polygon interpolation method." In Geoinformatics 2008 and Joint conference on GIS and Built Environment: The Built Environment and its Dynamics, edited by Lin Liu, Xia Li, Kai Liu, Xinchang Zhang, and Xinhao Wang. SPIE, 2008. http://dx.doi.org/10.1117/12.812868.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hartomo, Kristoko Dwi, and Dhimas Rizaldhi. "A New Model of Landslide Prone Map Using a Combination of Scoring and Polygon Thiessen Methods." In 2020 International Seminar on Application for Technology of Information and Communication (iSemantic). IEEE, 2020. http://dx.doi.org/10.1109/isemantic50169.2020.9234281.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Asnaashari, Ahmad, and Isam Shahrour. "A GIS-Based Spatial and Statistical Analysis on Water Mains Failure—Case Study: Sanandaj – Iran." In 2006 International Pipeline Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/ipc2006-10149.

Full text
Abstract:
This paper addresses a new procedure for spatial and statistical analysis of water mains failure. We use this methodology to analyze and predict the spatial behavior of failure on the water mains network. The analysis is based on data from Sanandaj city in Iran over a 10 year period. It includes 395 mains failure which they were geocoded as discrete points. Prediction maps are constructed using different spatial interpolation methods, namely; the Thiessen polygons, the Density estimation, and the Triangulated Irregular Network model (TIN). Thiessen polygons are used for proximity and area allocation analysis of failure points. Density of failure points is calculated for each cell by summing the number of failures in the cell. TIN model generates a surface form interpolation of failure density. The study indicates that the construction of continuous surface from point dataset offers an interesting tool for the prediction of water main failures. It also provides comprehensive spatial information system that can be easily used by utility managers as a decision-support tool to set up and compare strategies for the renewal of water mains.
APA, Harvard, Vancouver, ISO, and other styles
7

Jr., Daniel L. Gomes, Anselmo C. Paiva, Cláudio S. Baptista, Fábio L. Leite, and Rogério A. C. Fernandes. "A Visualization Method for Power Systems using Geographical Views and Thiessen Polygons." In Power and Energy Systems and Applications. ACTAPRESS, 2011. http://dx.doi.org/10.2316/p.2011.756-066.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jr., Daniel L. Gomes, Anselmo C. Paiva, Cláudio S. Baptista, Fábio L. Leite, and Rogério A. C. Fernandes. "A Visualization Method for Power Systems using Geographical Views and Thiessen Polygons." In Power and Energy Systems and Applications. ACTAPRESS, 2012. http://dx.doi.org/10.2316/p.2012.756-066.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Renigier-Bilozor, Malgorzata. "THE ANALYSIS OF THE SPATIAL RELATIONSHIPS OF URBAN NETWORKS WITH THE USE OF THIESSEN POLYGONS." In 15th International Multidisciplinary Scientific GeoConference SGEM2015. Stef92 Technology, 2011. http://dx.doi.org/10.5593/sgem2015/b22/s11.139.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Thiessen Polygon' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography