To see the other types of publications on this topic, follow the link: Thin-walled cylinders.

Journal articles on the topic 'Thin-walled cylinders'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Thin-walled cylinders.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Akarsu, Oğuzhan, Barış Bayrak, Mahmut Kiliç, Mahyar Maali, and Abdulkadir Cüneyt Aydin. "Dent-to-Stiffener Evaluation Concept for Thin-Walled Steel Cylinders." Architecture, Civil Engineering, Environment 16, no. 3 (2023): 43–54. http://dx.doi.org/10.2478/acee-2023-0032.

Full text
Abstract:
Abstract Defects/imperfections can occur during manufacturing, assembly, welding, and other processes, which can reduce the critical buckling load. However, the axial buckling load is beyond the scope of this work, and there are many studies on the stiffening effect of longitudinal dents. This concept combined the idea of the dent-to-stiffener evaluation concept for thin-walled steel cylinders. This study aims to transform the dents into artificial dents for a stiffening effect on the buckling phenomena. For this purpose, 37 thin-walled steel cylinder models, including the perfect model, were
APA, Harvard, Vancouver, ISO, and other styles
2

Talesnick, M. L. "Reliability of thin-walled cylinder tests for elastic properties of anisotropic rocks." Canadian Geotechnical Journal 33, no. 6 (1996): 1008–14. http://dx.doi.org/10.1139/t96-126.

Full text
Abstract:
Elastic properties of transverse isotropic rocks may be theoretically determined by subjecting a single hollow cylinder specimen to a set of two simple stress conditions. The reliability of the methodology is considered by testing both thin-walled hollow cylinders and thick-walled hollow cylinders. The results indicate that the testing procedure produces consistent material parameters, sample preparation does not seem to induce changes in the specimen behaviour, and that the assumptions implemented in the determination of the material parameters are reasonable. Key words: hollow cylinder, anis
APA, Harvard, Vancouver, ISO, and other styles
3

Prochaska, Biljana, Nebojša Radić, and Srđan Bulatović. "The mechanical modeling of thermomechanical processes for thin-walled cylinders." FME Transactions 52, no. 3 (2024): 429–39. http://dx.doi.org/10.5937/fme2403429p.

Full text
Abstract:
The problem of stress in perforated thin-walled cylinders due to mechanical and thermal load was analyzed for cases where the load of the system varies both along the cylinder circumference and axially. Starting from the solution and considerations for a smooth thin-walled cylinder, the concept was expanded and the distribution of deformations caused by thermal loads on the cylinder and the resulting stresses in the structure of the thin-walled perforated cylinder was observed for a specific form of perforation. The cylindrical perforated burner is one of the main elements of premixed condensi
APA, Harvard, Vancouver, ISO, and other styles
4

Kim, Do-Young, Chang-Hoon Sim, Jae-Sang Park, Joon-Tae Yoo, Young-Ha Yoon, and Keejoo Lee. "Buckling Knockdown Factors of Composite Cylinders under Both Compression and Internal Pressure." Aerospace 8, no. 11 (2021): 346. http://dx.doi.org/10.3390/aerospace8110346.

Full text
Abstract:
The internal pressure of a thin-walled cylindrical structure under axial compression may improve the buckling stability by relieving loads and reducing initial imperfections. In this study, the effect of internal pressure on the buckling knockdown factor is investigated for axially compressed thin-walled composite cylinders with different shell thickness ratios and slenderness ratios. Various shell thickness ratios and slenderness ratios are considered when the buckling knockdown factor is derived for the thin-walled composite cylinders under both axial compression and internal pressure. Nonli
APA, Harvard, Vancouver, ISO, and other styles
5

Tian, N., J. G. Liu, Y. Gao, K. Wang, and Z. C. Liu. "Study of mechanical properties of cylinder under transient multi-physical field coupling conditions." Journal of Physics: Conference Series 2478, no. 9 (2023): 092014. http://dx.doi.org/10.1088/1742-6596/2478/9/092014.

Full text
Abstract:
Abstract The use of lightweight metal cylinders is of great significance to artillery weapon systems in terms of significant mass reduction, service life extension, power consumption reduction and operational effectiveness. Based on the load conditions provided by the classical internal ballistic theory, a high precision finite element model is solved by the explicit integration algorithm with central difference. The results show that the maximum stress of the thin-walled cylinder increases linearly with the increase of the initial clearance, while the maximum extraction force increases first
APA, Harvard, Vancouver, ISO, and other styles
6

Simitses, George J. "Buckling and Postbuckling of Imperfect Cylindrical Shells: A Review." Applied Mechanics Reviews 39, no. 10 (1986): 1517–24. http://dx.doi.org/10.1115/1.3149506.

Full text
Abstract:
Thin-walled cylinders of various constructions are widely used in simple or complex structural configurations. The round cylinder is commonly found in tubing and piping, and in offshore platforms. Depending on their use, these cylinders are subjected (in service) to individual and combined application of external loads. In resisting these loads the system is subject to buckling, a failure mode which is closely associated with the establishment of its load-carrying capacity. Therefore, the system buckling and postbuckling behavior have been the subject of many researchers and investigators both
APA, Harvard, Vancouver, ISO, and other styles
7

Shen, Chao Qun, Li Jiao, Zhao Hui Dong, Lei Zhang, and Song Peng. "Experimental Investigation and Simulation of Machining Thin-Walled Aluminum Alloy Workpiece Center." Applied Mechanics and Materials 543-547 (March 2014): 370–73. http://dx.doi.org/10.4028/www.scientific.net/amm.543-547.370.

Full text
Abstract:
A method to predict the milling deformation of the cylinders deck face was carried out, and FEA technology was used in the research about machining deformation of the thin-walled part. In this work, a simple thin-walled part was taken as an example. The milling deflection of the workpiece had been predicted by establishing a FEA model. Finally, FEA results were verified with milling experimental data, which provided a theoretical basis for technology improvement of cylinders manufacture process.
APA, Harvard, Vancouver, ISO, and other styles
8

Gulgazli, Alasgar, and Ali Hikmat Ahmadov. "CYCLIC TORSION WITH INTERNAL PRESSURE OF PRE-STRETCHED THIN-WALLED CYLINDERS." ETM - Equipment, Technologies, Materials 05, no. 01 (2021): 21–24. http://dx.doi.org/10.36962/swd0202202021.

Full text
Abstract:
The article considers the following two tasks. 1) Strength calculations are carried out for a long thin-walled cylinder, the ends of which are not closed during reloading. At the first loading, the thin-walled cylinder is stretched by a longitudinal force leading to longitudinal plastic deformations. When reloaded, the cylinder twists and at the same time uniform pressure acts from the inside. It is noted that, in particular, the shaft of wind generators is subjected to such loading. It is proved that the equation of the yield curve in the plane of the normal and tangential stresses of the str
APA, Harvard, Vancouver, ISO, and other styles
9

Cammalleri, Marco, and Antonella Castellano. "A Dynamic Matrix for the Study of Free Vibrations of Thin Circular Cylindrical Shells under Different Boundary Conditions." Designs 7, no. 6 (2023): 122. http://dx.doi.org/10.3390/designs7060122.

Full text
Abstract:
Although free vibrations of thin-walled cylinders have been extensively addressed in the relevant literature, finding a good balance between accuracy and simplicity of the procedures used for natural frequency assessment is still an open issue. This paper proposes a novel approach with a high potential for practical application for rapid esteem of natural frequencies of thin-walled cylinders under different boundary conditions. Starting from Donnell–Mushtari’s shell theory, the differential problem is simplified by using the principle of virtual work and introducing the flexural waveforms of a
APA, Harvard, Vancouver, ISO, and other styles
10

Goltermann, Per. "Short Thin‐Walled Cylinders Under Combined Loading." Journal of Structural Engineering 117, no. 3 (1991): 951–71. http://dx.doi.org/10.1061/(asce)0733-9445(1991)117:3(951).

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Hardi, Witono, Mohammad Shalahuddin Abdul Aziz, and Amat Umron. "The Behavior of Thin-Walled Cylinders with Ribs Regarding the Energy Absorption Capability on High-Velocity Impact." Engineering Innovations 11 (June 26, 2024): 9–18. http://dx.doi.org/10.4028/p-2nqnma.

Full text
Abstract:
Many industries and automotive companies use thin-walled cylinders as energy-absorbing devices. Researchers have previously investigated various parameters related to thin-walled cylinders and their behavior under impact loads. When the impactor hits the thin-walled cylinder from the axial direction, it causes the bending of the cylinder wall on an axisymmetric or non-axisymmetric pattern, depending on the ratio of diameter divided by wall thickness. In addition, the length of the specimen influences the deformation mode that occurs. This study discusses how installing ribs on the cylinder wal
APA, Harvard, Vancouver, ISO, and other styles
12

Goltermann, P. "Buckling of Short, Thin-Walled Cylinders Under Combined Loading." Journal of Offshore Mechanics and Arctic Engineering 113, no. 4 (1991): 306–11. http://dx.doi.org/10.1115/1.2919935.

Full text
Abstract:
Short cylindrical shells are often used in offshore structures. Such cylinders are loaded by axial compression as well as hydrostatical pressure. The load-carrying capacity is for practical purposes determined for each of the two load cases separately. The determination of the load-carrying capacity for a combined loading is then based on a combination of those two load-carrying capacities. This combination differs from code to code and has a significant influence on the load-carrying capacity. This paper presents a rational way of estimating the capacity by using simple, well-known theories.
APA, Harvard, Vancouver, ISO, and other styles
13

Qin, Gao Ming, Hai Yang Duan, Zhong Luo, and Qing Kai Han. "Similitude Analysis on Mechanical Parameters of Thin Walled Shells." Advanced Engineering Forum 2-3 (December 2011): 936–41. http://dx.doi.org/10.4028/www.scientific.net/aef.2-3.936.

Full text
Abstract:
The relationship of the kinetic fundamental parameters for both the prototype and model are derived by employing the finite method. Based on the relations, the scaling laws of the thin walled cylinder for the free vibration are found by applying the similitude transformation to the governing equation. In the absence of the experimental data, the validity of the scaling laws is testified by numerical data. This is done by calculating theoretically the natural frequencies for free vibration of the cylinders. By substituting the model frequencies in the scaling laws, the frequencies of the protot
APA, Harvard, Vancouver, ISO, and other styles
14

de Paor, Caitríona. "Buckling of thin-walled cylinders: experimental and numerical investigation." Boolean: Snapshots of Doctoral Research at University College Cork, no. 2010 (January 1, 2010): 47–52. http://dx.doi.org/10.33178/boolean.2010.11.

Full text
Abstract:
Thin-walled structures, also known as shells, combine light weight with high strength and are used in a diverse range of fields including aerospace engineering, civil engineering and chemical engineering. Common applications of these shells include oil and gas storage tanks, powder or liquid storage tanks in pharmaceutical plants as well as airplane frames and ship bodies. Although these thin-walled shells have a wide variety of uses, this research is motivated by storage tank collapse in the process industry. Thin-walled cylindrical tanks common in the food and biotechnology sectors are prone
APA, Harvard, Vancouver, ISO, and other styles
15

Unal, Zarif, and Alp Esin. "Plastic torsional buckling of thin-walled circular cylinders." Materials Testing 28, no. 1-2 (1986): 31–35. http://dx.doi.org/10.1515/mt-1986-281-213.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Zhao, D., N. S. Ferguson, and G. Squicciarini. "Acoustic response of thin-walled, orthogonally stiffened cylinders." IOP Conference Series: Materials Science and Engineering 657 (October 25, 2019): 012007. http://dx.doi.org/10.1088/1757-899x/657/1/012007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Fuchs, H. P., and M. W. Hyer. "Bending response of thin-walled laminated composite cylinders." Composite Structures 22, no. 2 (1992): 87–107. http://dx.doi.org/10.1016/0263-8223(92)90070-s.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Nahas, M. N. "Impact energy dissipation characteristics of thin-walled cylinders." Thin-Walled Structures 15, no. 2 (1993): 81–93. http://dx.doi.org/10.1016/0263-8231(93)90020-b.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Wang, Si Hui, and Long Dao Xu. "The properties of thin-walled dual superconducting cylinders." Journal of Low Temperature Physics 82, no. 3-4 (1991): 235–53. http://dx.doi.org/10.1007/bf00681529.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Bigdeli, Ali, and Mohammad Damghani Nouri. "Investigation of the numerical, experimental, statistical and optimization of thin-walled energy absorber with novel configuration using response surface method under axial loading." Journal of Sandwich Structures & Materials 22, no. 8 (2018): 2735–67. http://dx.doi.org/10.1177/1099636218813196.

Full text
Abstract:
In this study, aluminum thin-walled cylindrical absorbers for crashworthiness are investigated to introduce a novel system with better energy absorption and crushing characteristics under quasi-static axial compressive loading. The inside of the thin-walled cylinders is meshed with a square welded from vertices to the thin-walled cylinder. Here, the response surface method, which is one of the design of experiments techniques has been used to examine the effect of the parameters on energy absorption, initial peak crushing force, specific energy absorption per unit mass and energy absorption pe
APA, Harvard, Vancouver, ISO, and other styles
21

Zhou, Xu, Congpeng Zhang, Minggang Xu, Baohai Wu, and Dinghua Zhang. "Prediction of Chatter Stability in Bull-Nose End Milling of Thin-Walled Cylindrical Parts Using Layered Cutting Force Coefficients." Applied Sciences 13, no. 11 (2023): 6737. http://dx.doi.org/10.3390/app13116737.

Full text
Abstract:
During the bull-nose end milling operations of thin-walled structures, chatter usually occurs and adversely affects cutter performance, finished surface quality, and production efficiency. To accurately predict chatter stability, a suitable dynamic model with effective system parameters is required. In this article, a three-degree-of-freedom (3-DOF) dynamic model is developed to analyze the milling stability of the thin-walled cylinders, in which the dynamics of the bull-nose end mill along the x-axis and y-axis directions and the dynamic of the workpiece along the z-axis direction are taken i
APA, Harvard, Vancouver, ISO, and other styles
22

Zhu, Xian-Kui. "Experimental Validation of Exact Burst Pressure Solutions for Thick-Walled Cylindrical Pressure Vessels." Applied Mechanics 6, no. 1 (2025): 20. https://doi.org/10.3390/applmech6010020.

Full text
Abstract:
Burst pressure is one of the critical strength parameters used in the design and operation of pressure vessels because it represents the maximum pressure that a vessel can withstand before failing. Historically, the Barlow formula was used as a design base for estimating burst pressure. However, it does not consider the plastic flow response for ductile steels and is applicable only to thin-walled cylinders (i.e., the diameter to thickness ratio D/t ≥ 20). A new multiaxial plastic yield theory was developed to consider the plastic flow response, and the associated theoretical (i.e., Zhu–Leis)
APA, Harvard, Vancouver, ISO, and other styles
23

PIRCHER, MARTIN, BERNHARD LECHNER, and HELMUT TRUTNOVSKY. "ELASTIC BUCKLING OF THIN-WALLED CYLINDERS UNDER WIND LOADING: AN EXPERIMENTAL STUDY." International Journal of Structural Stability and Dynamics 09, no. 01 (2009): 1–10. http://dx.doi.org/10.1142/s0219455409002977.

Full text
Abstract:
Thin-walled cylindrical structures have been found to display three distinctly different stability failure modes under wind loading, depending on their geometric and material properties. In low cylinders the radial compression at the meridian facing the wind causes a buckling mode similar to that for cylinders under constant radial compression, while very long cylinders display a failure mode characterized by buckling in the lower third of the structure at the side which faces away from the wind. The failure of medium height cylinders is characterized by a number of horizontal, ripple-like buc
APA, Harvard, Vancouver, ISO, and other styles
24

Liu, Yutong, Yuhao Zhou, Kaixuan Si, Shaowei Bie, and Jianjun Jiang. "Design of a high-efficient metamaterial X-band absorber composed of a dielectric cylinder combined with a thin magnetic cylinder unit." Journal of Applied Physics 132, no. 19 (2022): 194901. http://dx.doi.org/10.1063/5.0123984.

Full text
Abstract:
High-efficient microwave absorbers (MAs) with excellent absorption performance and lightweight characteristics have important applications in the military and civil. Here, we propose a dielectric-magnetic hybrid microwave absorber composed of a lattice of dielectric cylinders combined with thin magnetic cylinders backed by a perfect electrical conductor ground plane. The dielectric material that is designed as the dielectric cylinder is based on multi-walled carbon nanotubes-epoxy (MWCNT-EP). The MWCNT-EP is prepared and the S-parameters are measured by the standard transmission/reflection (T/
APA, Harvard, Vancouver, ISO, and other styles
25

Ogorodov, V. A., and N. K. Krioni. "Increasing the Accuracy of Honing for Thin-Walled Cylinders." Russian Aeronautics 63, no. 4 (2020): 739–45. http://dx.doi.org/10.3103/s1068799820040236.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

ADACHI, Tadaharu, Tsuyoshi TAKEMOTO, Wakako ARAKI, and Akihiko YAMAJI. "Impact Energy Absorption of Thin-Walled Cylinders with Ribs." Journal of the Society of Materials Science, Japan 53, no. 3 (2004): 241–46. http://dx.doi.org/10.2472/jsms.53.241.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Deng Jun and Shou Kun Deng. "A method for the machining of thin-walled cylinders." Journal of Materials Processing Technology 35, no. 2 (1992): 183–89. http://dx.doi.org/10.1016/0924-0136(92)90245-n.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Kil, Hyun‐Gwon, Allan D. Pierce, and Jerry H. Ginsberg. "Propagation of elastic waves on thin‐walled circular cylinders." Journal of the Acoustical Society of America 85, S1 (1989): S118. http://dx.doi.org/10.1121/1.2026672.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Lo, Hung-Chieh, and Michael W. Hyer. "Fundamental natural frequencies of thin-walled elliptical composite cylinders." Journal of Composite Materials 46, no. 10 (2012): 1169–90. http://dx.doi.org/10.1177/0021998311413691.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Ogorodov, V. A. "Hole shaping in the honing of thin-walled cylinders." Russian Engineering Research 37, no. 6 (2017): 549–53. http://dx.doi.org/10.3103/s1068798x17060168.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Seif, MA, and S. R. Short. "DETERMINATION OF RESIDUAL STRESSES IN THIN-WALLED COMPOSITE CYLINDERS." Experimental Techniques 26, no. 2 (2002): 43–46. http://dx.doi.org/10.1111/j.1747-1567.2002.tb00062.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Hardi, Witono, Mohammad Muzni Harbelubun, and Tri Suyono. "The Behaviour of Thin-Walled Cylinders with Reinforcing Inner Walls Subjected to High-Velocity Impact." IOP Conference Series: Earth and Environmental Science 1265, no. 1 (2023): 012008. http://dx.doi.org/10.1088/1755-1315/1265/1/012008.

Full text
Abstract:
Abstract Thin cylindrical tubes as impact energy absorbers have been widely used in various fields. Previous researchers have proposed many methods to increase the ability to absorb energy by modifying the geometry or using different materials. This study discusses using reinforcing walls in the cylinder to increase energy absorption capability. We make thin cylindrical specimens made of aluminium alloy with a length of 150 mm, a diameter of 50 mm, and a thickness of 1 mm. Reinforcing walls are fitted in the cylinder with a vertical position of 1, 2, 3, and without supporting walls. An impacto
APA, Harvard, Vancouver, ISO, and other styles
33

BHETWAL, KRISHNA KUMAR, and SEISHI YAMADA. "EFFECTS OF CFRP REINFORCEMENTS ON THE BUCKLING BEHAVIOR OF THIN-WALLED STEEL CYLINDERS UNDER COMPRESSION." International Journal of Structural Stability and Dynamics 12, no. 01 (2012): 131–51. http://dx.doi.org/10.1142/s0219455412004665.

Full text
Abstract:
This paper presents a novel way of strengthening thin-walled steel cylindrical shells against buckling during axial compression in which a small amount of fiber-reinforced polymer (FRP) composite, coated from both sides can increase the buckling strength effectively. The effects of the reinforcement and the angle of fiber orientation as well as initial geometric imperfections on the buckling load-carrying capacity have been made clear through the three kinds of analytical procedures; the conventional linear eigen value buckling analysis, the reduced stiffness (RS) buckling analysis and the ful
APA, Harvard, Vancouver, ISO, and other styles
34

Hosseini-Toudeshky, Hossein, M. Karimi, and Bijan Mohammadi. "Acoustic Fatigue Crack Growth Prediction in Coupled Air Structures." Key Engineering Materials 452-453 (November 2010): 293–96. http://dx.doi.org/10.4028/www.scientific.net/kem.452-453.293.

Full text
Abstract:
In this paper, crack growth of thin-walled cylinders containing an initial crack under acoustic plane wave is analyzed. A coupled air-structure modeling is considered for the analyses. For this purpose, a methodology for computational modeling of the fatigue crack growth in cracked cylinders using finite element method is presented. Effects of various parameters such as crack length increment and boundary conditions on the crack growth rate are investigated.
APA, Harvard, Vancouver, ISO, and other styles
35

Springhetti, Roberta, Gabriel Rossetto, and Davide Bigoni. "Necking of thin-walled cylinders via bifurcation of incompressible nonlinear elastic solids." Soft Matter 20 (July 4, 2024): 5703–14. https://doi.org/10.1039/d4sm00463a.

Full text
Abstract:
Necking localization under quasi-static uniaxial tension is experimentally observed in ductile thin-walled cylindrical tubes, made of soft polypropylene. Necking nucleates at multiple locations along the tube and spreads throughout, involving the occurrence of higher-order modes, evidencing trefoil and fourthfoiled (but rarely even fifth-foiled) shaped cross-sections. No evidence of such a complicated necking occurrence and growth was found in other ductile materials for thin-walled cylinders under quasi-static loading. With the aim of modelling this phenomenon, as well as all other possible b
APA, Harvard, Vancouver, ISO, and other styles
36

Wilson, J. F., and G. Orgill. "Linear Analysis of Uniformly Stressed, Orthotropic Cylindrical Shells." Journal of Applied Mechanics 53, no. 2 (1986): 249–56. http://dx.doi.org/10.1115/1.3171748.

Full text
Abstract:
Within the framework of classical elasticity, the nonbuckled deformations are calculated for orthotropic, right circular, thin-walled cylinders under uniform load conditions. The principle direction of orthotropy follows parallel constant angle helices. Nondimensional system parameters involving four material constants and three loading conditions (internal pressure, longitudinal load, and pure torque) are identified. Through parametric studies deformation patterns are calculated that are unique to orthotropy. Numerical examples illustrate that the proper selection of cylinder orthotropy can l
APA, Harvard, Vancouver, ISO, and other styles
37

Kobayashi, Masami, Koji Uetani, and Tomohiro Mikami. "The Occurrence Limit of Strain Nonuniformity in Thin-Walled Cylinders Subjected to Cyclic Torsion." Key Engineering Materials 340-341 (June 2007): 1411–16. http://dx.doi.org/10.4028/www.scientific.net/kem.340-341.1411.

Full text
Abstract:
The symmetry limit theory for 3-D continua developed by the authors, is applied to predictions of the occurrence limit of nonuniform strain in cylinders subjected to cyclic torsion. Bifurcation analysis of a steady-state path, which was defined as a continuous sequence of steady states generated under continuous increasing amplitude cyclic loading, is performed for the cylinder model. The deformation mode with very short wavelength in the circumferential direction is obtained, analogous to that in the internal buckling of a rigidly confined continuum shown by Biot. It is shown that this circum
APA, Harvard, Vancouver, ISO, and other styles
38

Ogorodov, V. A. "More Precise Honing of Holes in Stepped Thin-Walled Cylinders." Russian Engineering Research 41, no. 7 (2021): 607–11. http://dx.doi.org/10.3103/s1068798x21070200.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Ogorodov, Vladimir A. "Ensuring the accuracy of the honing of thin-walled cylinders." Metalloobrabotka, no. 4 (2020): 24–32. http://dx.doi.org/10.25960/mo.2020.4.24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Gattineni, V., and V. Nathi. "Thin-walled compound composite cylinders for improved specific energy absorption." IOP Conference Series: Materials Science and Engineering 998 (December 23, 2020): 012002. http://dx.doi.org/10.1088/1757-899x/998/1/012002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
41

Tsindlekht, M. I., V. M. Genkin, I. Felner, et al. "Magnetic flux penetration into finite length thin-walled niobium cylinders." Physica C: Superconductivity and its Applications 545 (February 2018): 10–13. http://dx.doi.org/10.1016/j.physc.2017.10.014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
42

de Paor, C., D. Kelliher, K. Cronin, W. M. D. Wright, and S. G. McSweeney. "Prediction of vacuum-induced buckling pressures of thin-walled cylinders." Thin-Walled Structures 55 (June 2012): 1–10. http://dx.doi.org/10.1016/j.tws.2012.03.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Ross, C. T. F., T. Johns, S. P. Beeby, and S. F. May. "Vibration of thin-walled ring-stiffened circular cylinders and cones." Thin-Walled Structures 18, no. 3 (1994): 177–90. http://dx.doi.org/10.1016/0263-8231(94)90017-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Barber, Ronggang Zhang J. R. "TRANSIENT THERMOELASTIC CONTACT AND STABILITY OF TWO THIN-WALLED CYLINDERS." Journal of Thermal Stresses 16, no. 1 (1993): 31–54. http://dx.doi.org/10.1080/01495739308946215.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Vasilikis, Daniel, and Spyros A. Karamanos. "Stability of confined thin-walled steel cylinders under external pressure." International Journal of Mechanical Sciences 51, no. 1 (2009): 21–32. http://dx.doi.org/10.1016/j.ijmecsci.2008.11.006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Bele, Eral, Chandra Veer Singh, and Glenn David Hibbard. "Failure mechanisms in thin-walled nanocrystalline cylinders under uniaxial compression." Acta Materialia 86 (March 2015): 157–68. http://dx.doi.org/10.1016/j.actamat.2014.11.041.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Springhetti, Roberta, Gabriel Rossetto, and Davide Bigoni. "Buckling of Thin-Walled Cylinders from Three Dimensional Nonlinear Elasticity." Journal of Elasticity 154 (July 20, 2022): 297–323. https://doi.org/10.1007/s10659-022-09905-4.

Full text
Abstract:
The paper deals with the bifurcation analysis of thin-walled compressed cylinders on the basis of Flügge's simplifying assumptions. As the most severe hypothesis introduced by Flügge is an incremental constitutive equation not descending from any nonlinear hyperelastic constitutive law, his formulation was re-derived on the basis of two different nonlinear hyperelastic constitutive equations, referred to compressible materials. Flügge's famous results were confirmed, together with all the limit equations, now rigorouslyobtained, also capturing the limit behaviours of surfac
APA, Harvard, Vancouver, ISO, and other styles
48

Springhetti, Roberta, gabriel rossetto, and Davide Bigoni. "Buckling of Thin-Walled Cylinders from Three Dimensional Nonlinear Elasticity." Journal of Elasticity 154 (July 20, 2022): 297–323. https://doi.org/10.1007/s10659-022-09905-4.

Full text
Abstract:
The paper deals with the bifurcation analysis of thin-walled compressed cylinders on the basis of Flügge's simplifying assumptions. As the most severe hypothesis introduced by Flügge is an incremental constitutive equation not descending from any nonlinear hyperelastic constitutive law, his formulation was re-derived on the basis of two different nonlinear hyperelastic constitutive equations, referred to compressible materials. Flügge's famous results were confirmed, together with all the limit equations, now rigorouslyobtained, also capturing the limit behaviours of surfac
APA, Harvard, Vancouver, ISO, and other styles
49

Tong, Pin, Fan Yang, David C. C. Lam, and Jun Wang. "Size Effects of Hair-Sized Structures – Torsion." Key Engineering Materials 261-263 (April 2004): 11–22. http://dx.doi.org/10.4028/www.scientific.net/kem.261-263.11.

Full text
Abstract:
Conventional strain-based mechanics theory does not account for contributions from strain gradients. Failure to include the strain gradient contributions can lead to underestimates of stresses and size-dependent behaviors in small-scaled structure [1]. This paper focus on the structural size effects on torsion of cylinders. The torsional stiffness of cylinders can be higher than conventional expectation when the cylinder size is in the nanometer - or micron-scale. Following the Saint-Venant theory of torsion, we established the equation of torsion in terms of the warping function on the basis
APA, Harvard, Vancouver, ISO, and other styles
50

Jakubowski, Andrzej. "Technology of Producing the Contact Connections of Superconductor Metal-Sheathed Cable." Management Systems in Production Engineering 25, no. 2 (2017): 110–19. http://dx.doi.org/10.1515/mspe-2017-0017.

Full text
Abstract:
Abstract The technology of producing the current contact connections on the superconductor cable edges is presented. This lead cable is used as one of the major elements of the magnetic system in thermonuclear reactor construction, actuality for modern world energy. The technology is realized by the radial draft of metal thin-walled tube on the conductor’s package. The filling of various profiles by round section wire is optimized. Geometrical characteristics of the dangerous crosssection (as a broken ring) of thin-walled tube injured by the sector cut-out are accounted. The comparative streng
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!