Relevant bibliographies by topics / Thin-walled parts

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'Thin-walled parts'

Author: Grafiati
Published: 4 June 2021
Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Thin-walled parts.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Thin-walled parts"

1

Huang, Yueh-Tzu, Chiung-Fang Huang, Bou-Yue Peng, et al. "Experimental and Numerical Study Determining the Warpage Phenomenon of Thin-Wall Injection Molding." Advances in Polymer Technology 2020 (October 26, 2020): 1–13. http://dx.doi.org/10.1155/2020/2914801.

Full text
Abstract:
This study emphasizes the warpage phenomenon of thin-walled parts using acrylonitrile-butadiene styrene (ABS) plus polycarbonate (PC) plastics for optimal processing by thin-wall injection molding. The authors first employed the Moldflow software to analyze the runner’s balance on multicavities for thin-walled parts and to simulate the warpage of thin-walled parts with thin-wall injection molding. Then, this study used those data to fabricate a real mold by computer numerical control machining. For this study, the authors fabricated thin-walled parts and measured their warpage using various pr
APA, Harvard, Vancouver, ISO, and other styles
2

Samardžiová, Michaela, Martin Kováč, and Martin Necpal. "Contact Measurement of Flatness of Parts with Low Rigidity." Key Engineering Materials 581 (October 2013): 437–42. http://dx.doi.org/10.4028/www.scientific.net/kem.581.437.

Full text
Abstract:
An article deals with a measurement of flatness of thin-walled parts with low rigidity. The flatness is important for quality thin-walled parts made by milling. Measurement of the variation in the flatness of thin-walled components conventional 3-axis, high-speed 3-axis milling was done. In the first part is description of flatness and definition of thin-walled parts. Second part characterizes the measuring system, the principle of measurement and experimental setup. The last part of this work is evaluation of the experiment, which compares different factors to determinate flatness during mach
APA, Harvard, Vancouver, ISO, and other styles
3

Yu, Jiangtong, Wenlei Sun, Haibo Huang, and Yong Huang. "Study on the Deformation Control and Microstructures of Thin-Walled Parts Repaired by Laser Cladding." Coatings 10, no. 4 (2020): 369. http://dx.doi.org/10.3390/coatings10040369.

Full text
Abstract:
To reduce the deformation and improve the quality of thin-walled parts repaired by laser cladding, a three-factor, three-level orthogonal experimental scheme was employed to clad Ni60 powder on thin-walled parts with a thickness of 3.5 mm. To measure the deformation of the thin-walled parts, a method of combining the meshing of the backs of the thin-walled parts and fixing one end of the parts during cladding was used. The effects of the powder feed rate, laser power, and scanning speed on the deformation of the thin-walled parts were studied via visual analysis and analysis of variance, and t
APA, Harvard, Vancouver, ISO, and other styles
4

Peterka, Jozef, and Ivan Buranský. "Using Aramis for Measurement of Deformation of Thin-Walled Parts during Milling." Research Papers Faculty of Materials Science and Technology Slovak University of Technology 18, no. 28 (2010): 45–50. http://dx.doi.org/10.2478/v10186-010-0005-3.

Full text
Abstract:
Using Aramis for Measurement of Deformation of Thin-Walled Parts during Milling This paper describes deformation measurement of thin-walled parts by ARAMIS measuring system. During the milling, machine and workpiece may deviate from required geometry. Thin-walled parts are primarily used in automotive, aerospace and energy industries. ARAMIS is a system for optical 3D deformation analysis for static or dynamically loaded specimens and components. ARAMIS measuring system can be used for determining the deformation of thin-walled parts during milling.
APA, Harvard, Vancouver, ISO, and other styles
5

Cao, Yuan, Yongxiang Jiang, Chaofan Hong, Yanxi Guo, Yuanlong Xu, and Jiayi Li. "Review of Defect Detection Methods for Thin-Walled Parts Based on Point Cloud Data Processing." Frontiers in Science and Engineering 4, no. 11 (2024): 1–6. http://dx.doi.org/10.54691/mmpzgk57.

Full text
Abstract:
Thin-walled parts are widely used in various fields of industrial production, but their inherent characteristics, such as low stiffness and susceptibility to deformation, make them prone to various defects during use. Thin-walled covering parts, which serve as thin shells or covers to protect other components, are extensively utilized in aerospace, automotive, and shipbuilding industries. The condition of these parts is directly related to the structural integrity, performance stability, and operational safety of the associated components and equipment. Due to their direct exposure to external
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Ming Hai, Zhong Hai Liu, and Wei Wang. "Study on Precision Machining Titanium Alloy Thin-Walled Parts." Advanced Materials Research 314-316 (August 2011): 1778–82. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.1778.

Full text
Abstract:
In order to obtain the aims of weight reduction, efficiency increase and quality assurance of thin-walled parts of aircraft engine, the titanium alloy thin-walled parts are machined by precision machining method in the experiment. In this paper the precision machining method is used to cut titanium alloy thin-walled parts. The data of surface roughness is chosen as constraint conditions, and machining parameters will be optimized. The optimization parameters is feasible in this experiment, the optimization method is helpful to improve machining parameters and machining technology of titanium a
APA, Harvard, Vancouver, ISO, and other styles
7

Hu, Yuanfan, Yongguo Zhu, and Feng Guo. "Riveting deformation prediction of aircraft thin-walled parts based on BAS-BP neural network." Journal of Physics: Conference Series 2955, no. 1 (2025): 012027. https://doi.org/10.1088/1742-6596/2955/1/012027.

Full text
Abstract:
Abstract The contact surface is rough, which affects the riveting process. Firstly, the mechanical analysis of riveting deformation is carried out. Force and contact stiffness of joint surfaces are constructed by fractal contact theory. The fractal contact model of the rough surface of thin-walled parts is established. Based on the measured data of the riveting surface, the finite element analysis model of the rough surface of thin-walled parts is established. The interference uniformity of thin-walled parts is influenced by variables such as riveting force, riveting force action time, the len
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Liang. "Air Thin-Walled Parts Machining Precision Control." Applied Mechanics and Materials 496-500 (January 2014): 1252–55. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.1252.

Full text
Abstract:
With the development of the aviation industry, the aircraft's increasingly high performance requirements, the overall application of thin-walled structural components became more widespread. However, due to the complex structure parts, thin wall, high precision machining process was complexity, the cutting force, cutting heat, clamping force under the influence of other factors, prone to machining distortion, and with the lower part wall thickness, decreased in rigidity, it was difficult to ensure processing quality. In this paper, we proposed several effective aviation thin-walled parts machi
APA, Harvard, Vancouver, ISO, and other styles
9

Min, Yonglin, Xiao Liu, Gaofeng Hu, et al. "A Research Method to Investigate the Effect of Vibration Suppression on Thin-Walled Parts of Aluminum Alloy 6061 Based on Cutting Fluid Spraying (CFS)." Machines 13, no. 7 (2025): 594. https://doi.org/10.3390/machines13070594.

Full text
Abstract:
This study aims to address the issues of high tool wear rate, severe deterioration of machining accuracy, and surface integrity in thin-walled part cutting processes, which are caused by vibration. To do so, this paper proposes a thin-walled part processing vibration control method based on CFS. With aluminum alloy 6061 planar thin-walled parts as the object of study, in this paper a CFS experimental platform was established, the influence of CFS on the dynamic characteristics of the thin-walled parts was analyzed, the effects of milling force and processing vibration during thin-walled part m
APA, Harvard, Vancouver, ISO, and other styles
10

Hrbál, Jakub, Marek Vozár, Boris Pätoprstý, and Ivan Buranský. "Stratégie frézovania tenkostenných komponentov z ťažkoobrobiteľného materiálu." Technológ 15, no. 3 (2023): 27–32. http://dx.doi.org/10.26552/tech.c.2023.3.5.

Full text
Abstract:
The paper deals with the issue of the influence of machining strategies and tool parameters on the quality of the machined surface of thin-walled parts made by WAAM technology. The current state of machining thin walled parts is complemented by utting tools in terms of materials, geometry, and tool wear. From the point of view of surface integrity, the roughness and flatness of machined thin-walled parts made of Inconel 718 nickel alloy material will be observed. The machining strategy and cutting tool geometry were designed by experimental machining. The results of the experiment are presente
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Thin-walled parts"

1

Kolluru, Kiran V. S. S. "On design and simulation of passive damping solutions for milling of thin-walled parts." Thesis, University of Nottingham, 2015. http://eprints.nottingham.ac.uk/14427/.

Full text
Abstract:
Machining of thin wall structures is a challenging area due to the problems such as chatter and forced vibrations that arise due to low stiffness of such structures. Up to now, most of the research was driven by need to improve productivity in manufacturing of aircraft components such as airframe panels; hence, straight thin walls such as cantilever structures were considered for research in machining dynamics. However, thin wall casings and particularly thin wall assemblies that are encountered in jet engine casings are not well studied. Not only their dynamics is quite different from that of
APA, Harvard, Vancouver, ISO, and other styles
2

Ступін, Борис Анатолійович, Борис Анатольевич Ступин, Borys Anatoliiovych Stupin та ін. "Повышение точности при обработке тонкостенных деталей". Thesis, Сумский государственный университет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/66722.

Full text
Abstract:
В машиностроении, авиастроении, приборостроении, и других отраслях машиностроения, распространённым видом изделий являются нежесткие тонкостенные детали. Обработка таких деталей связана с рядом сложностей, таких как: недостаточная жесткость заготовки и в целом технологической системы, деформация детали при закреплении ее на станке. Деформации влияют на точность детали после обработки. Соответственно, достижение заданных параметров точности обработанной поверхности становится сложной технологической и производственной задачей.
APA, Harvard, Vancouver, ISO, and other styles
3

Довгополов, Андрій Юрійович, Андрей Юрьевич Довгополов, Andrii Yurijovich Dovgopolov, Сергій Сергійович Некрасов, Сергей Сергеевич Некрасов та Serhii Serhiiovych Nekrasov. "Приспособление для закрепления тонкостенных деталей". Thesis, Сумский государственный университет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/39457.

Full text
Abstract:
В современном машиностроении используется большое количество тонкостенных деталей. В то же время, повышаются требования к точности деталей, в связи с новыми потребностями машиностроительной отрасли в точных, но не дорогих деталях. Получение точных недеформированных деталей является очень сложной и трудоемкой задачей. Поэтому поиск путей и методов зажима тонкостенных деталей – задача актуальная и имеет большое народнохозяйственное значение.
APA, Harvard, Vancouver, ISO, and other styles
4

Гермашев, А. И. "Методика исследования колебаний при фрезеровании тонкостенных деталей". Thesis, Сумский государственный университет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38085.

Full text
Abstract:
В авиакосмической отрасли широко применяются детали, имеющие тонкостенные элементы, которые получают путем концевого фрезерования на современных станках с ЧПУ. Из-за прерывистости процесса обработки и недостаточной жесткости тонкостенных элементов происходит появление вибраций, которые снижают качество обрабатываемой поверхности, геометрическую точность, стойкость инструмента и т.д.
APA, Harvard, Vancouver, ISO, and other styles
5

Stephenson, Richard C. "Comparing the Feasibility of Cutting Thin-Walled Sections from Five Commonly Used Metals Utilizing Wire Electric Discharge Machining." Diss., CLICK HERE for online access, 2007. http://contentdm.lib.byu.edu/ETD/image/etd1948.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kafka, Richard. "Vývoj SLM procesních parametrů pro tenkostěnné díly z niklové superslitiny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443180.

Full text
Abstract:
The diploma thesis deals with the development of process parameters of SLM technology for the material IN718. The main goal is an experimental development of a set of parameters for the production of thin-walled parts with regard to material density, surface roughness and tightness. The essence of the development of parameters is an experimental explanation of the influence of laser power and scanning speed on the morphology of single tracks, which are used for the production of a thin wall. Together with walls of larger widths and volume samples, it is possible to create an intersection of pa
APA, Harvard, Vancouver, ISO, and other styles
7

Міненко, Дем`ян Олександрович, Демьян Александрович Миненко, Demian Oleksandrovych Minenko та А. П. Антонов. "Получение узлов крепления в тонкостенных деталях". Thesis, Сумский государственный университет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/40282.

Full text
Abstract:
В машиностроении широко используются тонкостенные детали с узлами крепления: корпуса, поддоны, крышки, теплообменники, коллекторы, элементы трубопроводов и т. д. Узлы крепления в тонкостенных деталях традиционно изготавливают с использованием дополнительных крепежных элементов: гаек, резьбовых вставок, шпилек, которые закрепляются с помощью сварки, пайки или прессования.
APA, Harvard, Vancouver, ISO, and other styles
8

Procházka, Luděk. "Silové zatížení frézovacích nástrojů při obrábění." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-379018.

Full text
Abstract:
The thesis deals with the problem of force loading during machining of thin-walled parts. In the theoretical part, the force load applied during milling and the possibility of measuring of the force loading during milling is analyzed. Further the work focuses on the machining of thin-walled parts, problems in machining of these parts and the possibility of eliminating these issues. The practical part deals with the design and realization of the measurement of the force load on the selected components. The thesis also presents a comparison of the simulation model of deflection of thin-walled pa
APA, Harvard, Vancouver, ISO, and other styles
9

Janovský, Petr. "Aplikace měřicích sond v procesu frézování na stroji MCV1210/Sinumerik 840D." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378862.

Full text
Abstract:
This thesis concerns the technological processes of machining of thin-walled parts and the modification of said processes in dependence on the following interopera-tive measurement of the real dimensions of these parts. Within the theoretical part a research study of technological possibilities of measuring thin-walled parts and principles of probe programming are presented. In the main practical part of the the-sis a proposal of an experiment is described, which tests the individual technologi-cal steps and their influence on the quality of a prototype of the produced thin-walled part. Numeri
APA, Harvard, Vancouver, ISO, and other styles
10

Spáčil, Radek. "Analýza řezání tenkostěnných součástí pilou." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-379007.

Full text
Abstract:
Master‘s thesis deals with sawing of the thin-walled parts with high speed steel slitting saw. At first the most used conventional and unconventional possibilities of materiál cutting are described by a form of search. The next chapter describes forces arising from splitting saw machining, including their dependence on a specific cutting force, a chip cross section and a engagement angle. The second part of the thesis deals with the technological improvement of the cutting process, where three possible solutions are considered – geometry of the cutting tool, PVD coating deposition of the cutti
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Thin-walled parts"

1

Eremeykin, P. A., A. D. Zhargalova, and S. S. Gavriushin. "A Software System for Thin-walled Parts Deformation Analysis." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-67349-3_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Dobrotvorskiy, Sergey, Serhii Kononenko, Yevheniia Basova, Ludmila Dobrovolska, and Milan Edl. "Development of Optimum Thin-Walled Parts Milling Parameters Calculation Technique." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77719-7_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fan, Yuqi, Xing Yuan, and Nianmeng Luo. "Chatter Prediction for In-process Machining of a Thin-Walled Workpiece with Variable Curvature Considering Deformation." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-97-7887-4_103.

Full text
Abstract:
Abstract In aerospace applications, avoiding chatter is an efficient way to improve the machining quality of weakly stiff parts. However, it is not easy to establish an accurate chatter stability model for variable curvature thin-walled workpieces under time-varying machining conditions due to their complex dynamic characteristics. For this issue, the paper proposed a chatter prediction model to effectively predict the chatter of variable curvature thin-walled workpieces considering material removal, cutter position, deformation along the cutter radius and axis, and other time-varying machinin
APA, Harvard, Vancouver, ISO, and other styles
4

Rath, Jan-Erik, Robert Graupner, and Thorsten Schüppstuhl. "Die-Less Forming of Fiber-Reinforced Plastic Composites." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18326-3_1.

Full text
Abstract:
AbstractFiber-reinforced plastics (FRP) are increasingly popular in light weight applications such as aircraft manufacturing. However, most production processes of thin-walled FRP parts to date involve the use of expensive forming tools. This especially hinders cost-effective production of small series as well as individual parts and prototypes. In this paper, we develop new possible alternatives of highly automated and die-less production processes based on a short review of current approaches on flexible thin-walled FRP production. All proposed processes involve robot guided standard tools,
APA, Harvard, Vancouver, ISO, and other styles
5

Chval, Zdenek, Karel Raz, and Frantisek Sedlacek. "Dimension Stability of Thin-Walled Parts from 3D Printed Composite Materials." In Structural Integrity. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-91989-8_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kononenko, Serhii, Sergey Dobrotvorskiy, Yevheniia Basova, Ludmila Dobrovolska, and Vitalii Yepifanov. "Simulation of Thin-Walled Parts End Milling with Fluid Jet Support." In Advances in Design, Simulation and Manufacturing III. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-50794-7_37.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zhang, Dinghua, Ming Luo, Baohai Wu, and Ying Zhang. "Clamping Perception for Residual Stress-Induced Deformation of Thin-Walled Parts." In Intelligent Machining of Complex Aviation Components. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-1586-3_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Weber, D., B. Kirsch, C. R. D‘Elia, B. S. Linke, M. R. Hill, and J. C. Aurich. "Simulation-Based Investigation of the Distortion of Milled Thin-Walled Aluminum Structural Parts Due to Residual Stresses." In Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-35779-4_9.

Full text
Abstract:
AbstractNowadays, aluminum components in aircraft are mainly found in the form of thin-walled monolithic structural parts of the internal fuselage and the wings as spars and ribs [1]. This is because these components have excellent material properties for lightweight applications, such as a high strength-to-weight ratio and good corrosion resistance [2]. A typical manufacturing process to produce such structural components is milling. For these weight-optimized, monolithic components, up to 95% of the material is removed by machining [3]. The challenge with these thin-walled structural compone
APA, Harvard, Vancouver, ISO, and other styles
9

Edler, F. J., G. Lagrené, and R. Siepe. "Thin-walled Mg Structural Parts by a Low-pressure Sand Casting Process." In Magnesium Alloys and their Applications. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607552.ch87.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Piska, Miroslav, and Petra Ohnistova. "On the Advanced Milling Technology of Thin-Walled Parts for Aerospace Industry." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-56430-2_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Thin-walled parts"

1

Qiao, Yingwei, Hongchang Sun, Zhiqiang Liang, et al. "Size Measurement of Thin-walled Parts Based on Point Cloud Classification Simplification Strategy." In 2024 9th Asia-Pacific Conference on Intelligent Robot Systems (ACIRS). IEEE, 2024. http://dx.doi.org/10.1109/acirs62330.2024.10684965.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jiang, Yongxiang, Baihui Li, Hongchang Sun, Guifen Sun, Sanpeng Deng, and Yingwei Qiao. "Research on defect detection method for thin-walled parts based on point cloud data processing." In 2024 IEEE International Conference on Mechatronics and Automation (ICMA). IEEE, 2024. http://dx.doi.org/10.1109/icma61710.2024.10633030.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhilyaev, Igor V., Shun Hsyung Chang, Sergey N. Shevtsov, and Natalia Snezhina. "Simulation Based Optimization of Sequential Vacuum Infusion with Controlled Post-Infusion Stage for Thin-Walled Composite Parts Forming." In 2024 10th International Conference on Control, Decision and Information Technologies (CoDIT). IEEE, 2024. http://dx.doi.org/10.1109/codit62066.2024.10708625.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

McMains, Sara, Jordan Smith, Jianlin Wang, and Carlo Séquin. "Layered Manufacturing of Thin-Walled Parts." In ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/detc2000/dac-14285.

Full text
Abstract:
Abstract We describe a new algorithm we have developed for making partially hollow layered parts with thin, dense walls of approximately uniform thickness, for faster build times and reduced material usage. We have implemented our algorithm on a fused deposition modeling (FDM) machine, using separate build volumes for a loosely filled interior and a thin, solid, exterior wall. The build volumes are derived as simple boolean combinations of slice contours and their offsets. We make use of an efficient algorithm for computing the Voronoi diagram of a general polygon as part of the process of cre
APA, Harvard, Vancouver, ISO, and other styles
5

AVER, MELIKE, and OGUZHAN YILMAZ. "Designing of an Adaptive Fixture For Thin Walled Parts." In Fourth International Conference on Advances in Mechanical and Automation Engineering - MAE 2016. Institute of Research Engineers and Doctors, 2016. http://dx.doi.org/10.15224/978-1-63248-102-3-64.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yang, Jiahao, Jingxiang Lv, and Yingfeng Zhang. "Multi-objective optimization of milling process for thin-walled parts." In 2018 IEEE 15th International Conference on Networking, Sensing and Control (ICNSC). IEEE, 2018. http://dx.doi.org/10.1109/icnsc.2018.8361310.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Struzikiewicz, Grzegorz, and Wojciech Zębala. "Strain simulation in face turning of Ti6Al4V thin-walled parts." In Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2017, edited by Ryszard S. Romaniuk and Maciej Linczuk. SPIE, 2017. http://dx.doi.org/10.1117/12.2281061.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhu, Xiurong. "Thin-walled parts CNC Milling Process Analysis and Parameter Optimization." In 2015 International Conference on Mechatronics, Electronic, Industrial and Control Engineering. Atlantis Press, 2015. http://dx.doi.org/10.2991/meic-15.2015.36.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Yong, and Yongmin Jiang. "Thin-walled parts flexible fixture system rigid positioning support research." In 2017 6th International Conference on Measurement, Instrumentation and Automation (ICMIA 2017). Atlantis Press, 2017. http://dx.doi.org/10.2991/icmia-17.2017.85.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kehui, Xu, Xue Kairui, Fan Shixun, Wen Zhijie, and Fan Dapeng. "Simulation of thin-walled cylindrical parts assembly under ship oscillation." In 2022 5th World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM). IEEE, 2022. http://dx.doi.org/10.1109/wcmeim56910.2022.10021530.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Thin-walled parts"

1

Denys and Lefevre. L51780 Interaction of Multiple Through-Thickness Defects Under Plastic Collapse Conditions Part 1. Pipeline Research Council International, Inc. (PRCI), 2000. http://dx.doi.org/10.55274/r0010339.

Full text
Abstract:
The objective of this research project is to generate experimental information with the aim to quantify the conservatism of current interaction rules and to develop more accurate (less conservative) rules for "thin-walled" structures under plastic collapse. The conservatism in current defect interaction rules for ductile materials has been assessed by examining the failure behaviour of 8 mm and 10 mm thick, narrow (width: 100 mm and 120 mm) and wide (width: 427 mm) plate, specimens containing two coplanar or non-coplanar through thickness notches. The test results were compared to the failure
APA, Harvard, Vancouver, ISO, and other styles
2

SHAKING TABLE TEST OF NEW LIGHT STEEL STRUCTURE SYSTEM. The Hong Kong Institute of Steel Construction, 2022. http://dx.doi.org/10.18057/icass2020.p.342.

Full text
Abstract:
The low-rise cold-formed thin-walled steel buildings have good seismic performance, and their lateral force resistance is generally provided by the pull-out parts, the wall skeleton support system, and the skin effect between the wall skeleton and the wall. However, the current cold-formed thin-walled steel residential system is difficult to meet the seismic requirements of multi-storey cold-formed thin-walled steel buildings in high intensity areas. In this paper, the thin steel brace and light steel skeleton are combined to form a wall skeleton with a new support system with "truss structure
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Thin-walled parts' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography