Relevant bibliographies by topics / Third order autocorrelator

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Third order autocorrelator'

Author: Grafiati
Published: 4 June 2021
Last updated: 13 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Third order autocorrelator.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Third order autocorrelator"

1

COLLIER, J., C. HERNANDEZ-GOMEZ, R. ALLOTT, C. DANSON, and A. HALL. "A single-shot third-order autocorrelator for pulse contrast and pulse shape measurements." Laser and Particle Beams 19, no. 2 (April 2001): 231–35. http://dx.doi.org/10.1017/s0263034601192116.

Full text
Abstract:
We present the design of a single-shot third-order autocorrelator that can be used to measure optical pulse lengths of ultrashort pulses within a fixed time window on a single-shot basis. It has a number of advantages over traditional second-order autocorrelation devices, namely a more direct and accurate measurement of pulse shape, the ability to differentiate temporal activity ahead and behind the pulse, and an increased dynamic range. The design is linear and is, in principle, no more difficult to construct and operate than a second-order autocorrelator.
APA, Harvard, Vancouver, ISO, and other styles
2

Ramos-Ortiz, G., M. Cha, S. Thayumanavan, J. C. Mendez, S. R. Marder, and B. Kippelen. "Third-order optical autocorrelator for time-domain operationat telecommunication wavelengths." Applied Physics Letters 85, no. 2 (July 12, 2004): 179–81. http://dx.doi.org/10.1063/1.1771809.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Major, Arkady, Fumiyo Yoshino, J. Stewart Aitchison, and Peter W. E. Smith. "Wide spectral range third-order autocorrelator based on ultrafast nonresonant nonlinear refraction." Optics Letters 29, no. 16 (August 13, 2004): 1945. http://dx.doi.org/10.1364/ol.29.001945.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Major, Arkady, Fumiyo Yoshino, J. Stewart Aitchison, and Peter W. E. Smith. "Wide spectral range third-order autocorrelator based on ultrafast nonresonant nonlinear refraction: erratum." Optics Letters 30, no. 19 (October 1, 2005): 2653. http://dx.doi.org/10.1364/ol.30.002653.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Bao, Wenxia, Nan Zhang, and Xiaonong Zhu. "Study of dispersion compensation effect of femtosecond laser amplifier using home-made third-order autocorrelator." Optics & Laser Technology 54 (December 2013): 242–48. http://dx.doi.org/10.1016/j.optlastec.2013.05.026.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Nguimkeu, P. E., and M. Rekkas. "Third-order inference for autocorrelation in nonlinear regression models." Journal of Statistical Planning and Inference 141, no. 11 (November 2011): 3413–25. http://dx.doi.org/10.1016/j.jspi.2011.04.019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wei, Yizhen, Scott Howard, Adam Straub, Zinan Wang, Ji Cheng, Shiming Gao, and Chris Xu. "High sensitivity third-order autocorrelation measurement by intensity modulation and third harmonic detection." Optics Letters 36, no. 12 (June 15, 2011): 2372. http://dx.doi.org/10.1364/ol.36.002372.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Miyoshi, Y., S. Zaitsu, and T. Imasaka. "In situ third-order interferometric autocorrelation of a femtosecond deep-ultraviolet pulse." Applied Physics B 103, no. 4 (November 27, 2010): 789–94. http://dx.doi.org/10.1007/s00340-010-4324-z.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wei, Yizhen, and Shiming Gao. "Extraction and measurement sensitivity improvement of third-order autocorrelation trace from mixed autocorrelations." Microwave and Optical Technology Letters 56, no. 10 (July 22, 2014): 2234–37. http://dx.doi.org/10.1002/mop.28557.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sun Zhihong, 孙志红, 夏彦文 Xia Yanwen, 刘华 Liu Hua, and 傅学军 Fu Xuejun. "Contrast ratio measurement of single shot picosecond pulse using third-order noncollinear autocorrelation technique." High Power Laser and Particle Beams 22, no. 8 (2010): 1852–56. http://dx.doi.org/10.3788/hplpb20102208.1852.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Third order autocorrelator"

1

Weiss, Jiří. "Diagnostika impulzů Ti:Sa laseru pro generaci plazmatu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231778.

Full text
Abstract:
This diploma thesis is focused on investigation of temporal characteristics of laser pulses generated by oscillator with Ti:Sapphire active laser medium. In terms of properties of laserinduced plasmas the beam quality is crucial, in particular laser pulse contrast ratio. A new prototype of third order autocorrelator was designed. Pulse contrast ratio measurement is based on sum frequency generation between pulse of fundamental wavelength and its frequency doubled replica. Dynamic range of presented autocorrelator is estimated to be up to 8×10^12 which is more than currently available commercial devices can offer.
APA, Harvard, Vancouver, ISO, and other styles
2

Liao, Chien-Hung, and 廖健宏. "Design of high dynamic range third-order autocorrelator and verification." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/75071617432121203123.

Full text
Abstract:
碩士
國立中央大學
物理學系
101
There are two kinds of targets in laser-plasma interaction experiments, gas target and solid target. Gas target is used in table-top electron accelerator, high-harmonic generation, EUV laser, and mid infrared generation. Solid target is used in braking radiation and plasma mirror. In these experiments a very important condition is that the prepulses must not ionize the target before the main pulse arrives. Prepulses are the small pulses that appear before the main pulse. For this reason laser contrast is a very important parameter in laser-plasma interaction experiment. In general the ionization threshold of gas target is about 1014 W/cm2 and that of the solid target is about 1010 W/cm2. The intensity of National Central University 100 TW laser system can reach 1019 W/cm2. Under this condition, the required contrast is 105 and 109 for gas and solid targets respectively. To ensure the laser has a high enough contrast, a 1010 high dynamic range autocorrelator is needed as a diagnosis tool in a high performance lase system. The dynamic range of our existing third-order autocorrelator is only 108, much lower than the theoretical estimation of 1010. In this experiment, we change the signal processing for PMT (photo multiplier tube) by inserting a current amplifier to raise the dark current signal of the PMT above the quantization noise of the analog-to-digital converter. After this modification, the dark current can be observed easily and the signal is amplified by two orders of magnitude without increasing the noise. The dynamic range is increased by two orders of magnitude by this method.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Third order autocorrelator"

1

Zhong, Yi, Zheng Zhou, and Ting Jiang. "Research on Theory of Almost Perfect Binary-Third-Order Cyclic Autocorrelation Sequences." In Lecture Notes in Electrical Engineering, 237–45. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-5803-6_24.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Arnold, Christopher G., and Richard P. Appelbaum. "The Use of GIS to Measure Spatial Patterns of Ethnic Firms in the Los Angeles Garment Industry." In Anthropology, Space, and Geographic Information Systems. Oxford University Press, 1996. http://dx.doi.org/10.1093/oso/9780195085754.003.0006.

Full text
Abstract:
The purpose of this chapter is to describe the methodology and present some initial results in our efforts to understand the role of spatial organization in ethnic economies of the Los Angeles garment industry. Our research goal was to provide a spatial dimension to our database in order to test theories maintaining that space is a critical component of economic transactions. To this end, we created analytical grids of various resolutions using three GIS functions: address matching, polygon generation, and identity overlay. The grids were then transformed into matrices and tested for spatial autocorrelations using Statistical Analysis System (SAS) routines proposed by Griffith (1992). The following section presents brief arguments for the importance of space from the perspectives of industrial district and ethnic economy theories. The third section describes the research site and data sources. The fourth section outlines the analytical concerns of spatial autocorrelation and the modifiable areal unit problem (MAUP), which leads to a discussion of the relevant GIS operations in the fifth section. The sixth section presents spatial autocorrelation measures that show a direct relationship between spatial concentration and economic success in the Los Angeles garment district. The concluding section summarizes the importance of GIS as an analytical tool. Both industrial district and ethnic economy perspectives are based on assumptions about the importance of space. Business economists and geographers show that arrangements within spatially concentrated, tightly integrated industrial districts are critical to globally competitive industries, rapid information flow, lowered transaction costs, and increased control over production, permitting quick and flexible responses to changing market demands (Scott and Mattingly 1989; Piore and Sable 1884; Storper and Walker 1992; Storper and Christopherson 1987). In particular, Porter (1990)—a Harvard Business School economist and member of former President Reagan’s Council on Competitiveness— emphasizes that geographic concentration increases local competition as well as fostering such “emotional factors” as trust, pride, and bragging rights. Spatial concentration, while less prominent in discussions of ethnic economies, remains an underlying factor in providing a venue for the exchange of cultural capital.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Third order autocorrelator"

1

Fischer, R., J. Gauger, and J. Tilgner. "Fringe resolved third-order autocorrelation functions." In AIP Conference Proceedings Volume 172. AIP, 1988. http://dx.doi.org/10.1063/1.37468.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yi Zhong, Zheng Zhou, and Yutong Wang. "Research on theory of binary-third-order cyclic autocorrelation sequences." In 2012 International Symposium on Communications and Information Technologies (ISCIT). IEEE, 2012. http://dx.doi.org/10.1109/iscit.2012.6380972.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wei, Yizhen, Scott Howard, Ji Cheng, Zinan Wang, Adam Straub, and Chris Xu. "High sensitivity, simultaneous second- and third-order autocorrelation measurement in a GaAsP photomultiplier tube." In CLEO: Applications and Technology. Washington, D.C.: OSA, 2011. http://dx.doi.org/10.1364/cleo_at.2011.jwa83.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Third order autocorrelator' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography