To see the other types of publications on this topic, follow the link: Throttle distributor.

Journal articles on the topic 'Throttle distributor'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Throttle distributor.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Oleksii, Havrylenko, and Kulinich Serhii. "ANALYZING AN ERROR IN THE SYNCHRONIZATION OF HYDRAULIC MOTOR SPEED UNDER TRANSIENT OPERATING CONDITIONS." Eastern-European Journal of Enterprise Technologies 4, no. 7 (100) (2019): 30–37. https://doi.org/10.15587/1729-4061.2019.175033.

Full text
Abstract:
A hydraulic drive with two hydraulic cylinders was considered in which the rod movement speeds are synchronized by a divider of the working fluid flow. Based on the developed mathematical model, operation of synchronized hydraulic cylinders in transient operating conditions with a sudden change of load on one of the hydraulic cylinders was calculated. Speeds of movement of the hydraulic cylinder rods and pressures in the inter-throttle chambers of the flow divider were determined. It was established that there were variations of pressure in the inter-chamber chambers of the flow divider in the
APA, Harvard, Vancouver, ISO, and other styles
2

Kong, Yongqiang, Yuhai Cui, and Rui Xia. "Modelling and structure optimisation on throttle tube of pre-throttle water distributor." International Journal of Modelling, Identification and Control 36, no. 3 (2020): 248. http://dx.doi.org/10.1504/ijmic.2020.10040137.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cui, Yuhai, Rui Xia, and Yongqiang Kong. "Modelling and structure optimisation on throttle tube of pre-throttle water distributor." International Journal of Modelling, Identification and Control 36, no. 3 (2020): 248. http://dx.doi.org/10.1504/ijmic.2020.116917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sun, Qi Guo, A. Li Cai, Hong Bo Lv, and Zheng Hui Zhou. "Performance Simulation and Analysis of the Progressive Distributor of the Oil-Air Lubrication by AMEsim." Applied Mechanics and Materials 395-396 (September 2013): 1227–32. http://dx.doi.org/10.4028/www.scientific.net/amm.395-396.1227.

Full text
Abstract:
The mathematical model and the simulation model of the progressive distributor are established using an analytic method and AMEsim, a kind of simulation platform, respectively in this paper. The influences of the progressive structure, the viscous friction coefficient, the flow and pressure of the system and the size of throttle orifice on the performance of the progressive distributor are analyzed by the numerical simulation method. The results show that the fluctuations of the flow and pressure of the system are produced due to the overlapping motion of the three pistons, the oil-flow of the
APA, Harvard, Vancouver, ISO, and other styles
5

Obukhova, Elena, Gennady E. Veselov, Pavel Obukhov, Alexey Beskopylny, Sergey A. Stel’makh, and Evgenii M. Shcherban’. "Synergetic Synthesis of Nonlinear Laws of Throttle Control of a Pneumatic Drive." Applied Sciences 12, no. 4 (2022): 1797. http://dx.doi.org/10.3390/app12041797.

Full text
Abstract:
Currently, a significant trend in control in robotic systems is developing and improving linear and nonlinear control algorithms to improve the overall quality of production with high accuracy and adaptability. The present study considers a synergistic synthesis of throttle control of a pneumatic distributor valve and backpressure control for piston rod positioning. The article presents the synthesis of control laws for the position of a pneumatic cylinder piston using the method of analytical design of aggregated regulators (ADAR) of synergetic control theory (STC), which allows operation wit
APA, Harvard, Vancouver, ISO, and other styles
6

Tarasevych, Yuliia, and Nataliia SOVENKO. "THE IMPACT OF SELECTED PARAMETERS ON PRESSURE DISTRIBUTION IN THE FACE THROTTLE OF A CENTRIFUGAL PUMP AUTOMATIC BALANCING DEVICE." Tribologia 297, no. 3 (2021): 35–44. http://dx.doi.org/10.5604/01.3001.0015.6895.

Full text
Abstract:
Face throttles are a necessary functional element of non-contact face seals and automatic balancing devices of centrifugal pumps of different constructions. To calculate the hydrodynamic forces and moments acting on the rotor and fluid flow through the automatic balancing device, it is necessary to know the pressure distribution in the cylindrical and face throttle when considering all important factors which predetermine fluid flow. The face throttle surfaces are moving, which leads to unsteady fluid flow. The movement of the walls of the face throttle causes an additional circumferential and
APA, Harvard, Vancouver, ISO, and other styles
7

Sufyan. A. N and M. K. Khedher. "DEVELOPING AND TESTING AN AIR FLOW DISTRIBUTOR OF SOLAR DRYER FOR DRYING MORINGA OLEIFERA IN ARID CLIMATE." IRAQI JOURNAL OF AGRICULTURAL SCIENCES 55, no. 3 (2024): 1186–93. http://dx.doi.org/10.36103/51w4b403.

Full text
Abstract:
This study was aimed to investigate an air-flow distributer of a solar dryer. This study was contained two factors: First, the air outlet throttle (three angles, 30°, 60°, and 90°). Second, the design of the air inlet with three levels (new design (I2), without (I1), and half-opening air inlet gate of the new design (I3)). The results show significant effects on these parameters, where the highest efficiency (51.7%) was obtained at (I1) and (30°) angles. While the temperature changes between the inlet and outlet had a significant effect on the pressure difference, the pressure difference incre
APA, Harvard, Vancouver, ISO, and other styles
8

Trukhanov, K. A., and A. V. Gontarev. "MATHEMATICAL MODEL AND DYNAMICS OF A VARIABLE THROTTLE (CHOKE VALVE) FOR X-MAS TREES." Spravochnik. Inzhenernyi zhurnal, no. 312 (March 2023): 8–20. http://dx.doi.org/10.14489/hb.2023.03.pp.008-020.

Full text
Abstract:
One of the main elements of the subsea production system (SPS) is an adjustable throttle that regulates the supply of the medium (liquid) moved along the wellbore. The drive that controls the position of the shut-off-and-regulating element (SCE) of the throttle should provide increased requirements for reliability and dynamics, based on the requirements for the stability of the SCE, since the occurrence of self-oscillations can be the cause of the «start of disasters». Modern methods for the development and analysis of technical systems are based on the widespread use of mathematical models ba
APA, Harvard, Vancouver, ISO, and other styles
9

Петров, Ю. А., А. C. Берников, Е. Н. Брешев, and А. Ю. Колобов. "On the issue of improving the device for moving the main propulsion system camera along the yaw and pitch channels." Вестник НПО им. С.А. Лавочкина, no. 3(65) (September 20, 2024): 72–78. http://dx.doi.org/10.26162/ls.2024.80.76.011.

Full text
Abstract:
В статье рассматривается принципиальная схема функционирования электрогидравлической рулевой машины (РМ). Показано конструктивное исполнение шестерённого насоса с золотниковым распределителем масла, механическое перемещение которого основано на использовании поляризованного реле. Показана проблема настройки золотников, перекрывающих дроссельные окна с обеспечением расчётных скоростей перемещения штока гидроцилиндра. Обосновывается выбор границы зоны нечувствительности. Приводятся проблемы, связанные с заправкой маслом РМ. Предложена электромеханическая альтернатива конструкции электрогидравлич
APA, Harvard, Vancouver, ISO, and other styles
10

Trukhanov, K. A. "DYNAMICS OF PNEUMATIC DRIVE. LECTURE CYCLE. THE INFLUENCE OF THE ADOPTED FRICTION MODEL ON THE STABILITY OF THE TRANSIENT PROCESSES OF THE SERVO PNEUMATIC DRIVE." Spravochnik. Inzhenernyi zhurnal, no. 301 (April 2022): 2–19. http://dx.doi.org/10.14489/hb.supp.2022.04.pp.002-019.

Full text
Abstract:
The paper considers the main features of the servo pneumatic actuator with throttle control, the design features of the drive and the element for its control are given. Two design schemes of the pneumatic drive are described and are given: an “integrated” scheme and a “spaced” scheme. The advantages and disadvantages of each of the schemes are determined. The principle of operation of each element of a servo pneumatic drive consisting of a pneumatic cylinder with feedback, a feedback sensor (position), pro-portional to the distributor is considered. The characteristic of the transition process
APA, Harvard, Vancouver, ISO, and other styles
11

Pan, GaoFeng, He Hao, Ye Dai, ShiLong He, and ChaoYu Zhang. "Static characterization analysis and parameter optimization of composite throttle bearing based on Adaptive Particle Swarm Algorithm." Journal of Physics: Conference Series 3023, no. 1 (2025): 012005. https://doi.org/10.1088/1742-6596/3023/1/012005.

Full text
Abstract:
Abstract In this paper, a composite throttled hydrostatic gas bearing based on annular surface throttling is proposed to improve the static characteristics of hydrostatic gas bearings. The effects of various design parameters on the static characteristics of composite throttled gas bearings are investigated using computational fluid dynamics. An adaptive particle swarm optimization algorithm (APSO) is used to optimize the parameters for the obtained data to obtain the desired design parameters, and experiments are conducted to confirm the accuracy of the results. The results show that the comp
APA, Harvard, Vancouver, ISO, and other styles
12

Aslanov, Jamaladdin Nuraddin, Gahraman Soyun Hasanov, Zenfira Seydi Huseynli, Naila Aga Kazim Hasanova, Tamila Uzeyir Khankishiyeva, and Neman Ramin Agazade. "Investigation of the Durability of the Regulating Junction of the Christmas Tree Throttle." Revista de Gestão Social e Ambiental 18, no. 11 (2024): e09294. http://dx.doi.org/10.24857/rgsa.v18n11-033.

Full text
Abstract:
Objective: In the research work, the issue of ensuring the stability of its details wasconsidered by studying the voltage distribution mode in the throttle control node. SolidWorks software was used to perform force analysis of the improved throttle. Theoretical Framework: The research draws upon theories and simulations related to regulatory constructions and wear prevention. Methodology: In the research work, the performance criteria of the improved throttle have been studied. The force analysis of the proposed throttle's regulating node was carried out using modern methods and Solidworks si
APA, Harvard, Vancouver, ISO, and other styles
13

Savin, Leonid A., Alexey V. Kornaev, and Elena P. Kornaeva. "Influence of Critical Flow Rates on Characteristics of Enforced and Shear Flows in Circular Convergent-Divergent Channels." International Journal of Rotating Machinery 2017 (2017): 1–8. http://dx.doi.org/10.1155/2017/8761375.

Full text
Abstract:
Analysis of the reasons of critical flow rate occurrence in hydraulic tracts of cryogenic machines has been carried out. Theoretical expressions have been derived to calculate critical velocities in a boiling multiphase medium. Applied to hybrid fluid-film bearings with throttles for lubricant supply, a mathematical model has been developed to calculate pressure distribution and hydrodynamic reaction forces of a lubricant considering the influence of steam content and critical flows in throttle devices. Numerical results of phase state and load capacity calculations of a hybrid fluid-film bear
APA, Harvard, Vancouver, ISO, and other styles
14

Selezen, Oleh, Mark Shliakhov та Roman Orlov. "Коефіцієнт гідравлічного опору тертя капілярів за малих чисел Рейнольдса". Aerospace Technic and Technology, № 4 (24 серпня 2023): 28–32. http://dx.doi.org/10.32620/aktt.2023.4.03.

Full text
Abstract:
Heat transfer pump circuits with liquid or two-phase heat transfer fluids are widely used in thermal management systems in both space and ground applications. These systems play an important role in maintaining the optimal temperature and heat distribution in various processes and devices. Such systems use throttles to ensure efficient distribution of coolant flows through the hydraulic network. It is especially important to ensure the reliability of the system at low coolant consumption. Therefore, a rational approach is to manufacture throttles in the form of capillary segments. Capillary th
APA, Harvard, Vancouver, ISO, and other styles
15

Shargorodskiy, Serhiy, Vasyliy Yanishevskiy, and Olga Yalina. "OVERVIEW OF TECHNOLOGIES AND TECHNOLOGICAL EQUIPMENT FOR HAYME PROCESSING." ENGINEERING, ENERGY, TRANSPORT AIC, no. 3(110) (October 30, 2020): 145–52. http://dx.doi.org/10.37128/2520-6168-2020-3-15.

Full text
Abstract:
Fodder production is one of the most important sectors of the agro-industrial complex of Ukraine, the pace and scientific and technical level of development of which largely determines the solution of the country's food problem, full satisfaction of the population's food needs. A limiting factor for the development of this industry is the lack of efficient, easy-to-use and cheap equipment for collecting, raking, stirring, and pressing domestically produced hay, which would be able to compete with foreign analogues. The publication is devoted to the development of a hydraulic drive of the worki
APA, Harvard, Vancouver, ISO, and other styles
16

Lisoval, А. А. "RELATED REGULATION OF BIOGAS SUPPLIES AND METHANE IN A GAS ENGINE." Internal Combustion Engines, no. 1 (October 26, 2021): 86–91. http://dx.doi.org/10.20998/0419-8719.2021.1.11.

Full text
Abstract:
The results of experimental researches were received on a gas-electric installation with a rated power of 30 kW at 1500 rpm. The spark-ignited petrol drive engine (8-cylinder, 100 mm cylinder diameter, 88 mm stroke) was converted to a pure gas one. The compression ratio of 8.5 did not change. The gas fuel supply system consists of a supply line and an emergency shut-off circuit. The natural gas supply line was connected to the domestic main line through a special gas distributor. On the basis of HEINZMANN components, a system for dosing mixed gas fuel was developed, which, through a microproce
APA, Harvard, Vancouver, ISO, and other styles
17

Serhii, Kovalov, Parsadanov Igor, and Plis Serhii. "Development and research the electronic control system for gas engines converted on the basis of diesels." TECHNOLOGY AUDIT AND PRODUCTION RESERVES 1, no. 5(55) (2020): 21–23. https://doi.org/10.15587/2706-5448.2020.215007.

Full text
Abstract:
<em>The object of research is an electronic microprocessor control system for gas internal combustion engines with spark ignition for operation on liquefied petroleum gas. The system consists of two main subsystems, the accumulative</em>&nbsp;<em>power supply common rail LPG injection subsystem and the contactless electronic ignition subsystem with a movable voltage distributor. In addition, the control system also includes a subsystem for controlling the filling of the cylinders with the charge of the working mixture, consisting of a throttle valve and an idle speed regulator with a conical d
APA, Harvard, Vancouver, ISO, and other styles
18

Chen, Yi Jie, Guan Hui Zheng, Hai Jie Ju, Jian Juan Guo, and Xiao Ling Han. "Research on the Special Load Deflection of the Annular Throttle Slice of Shock Absorber." Advanced Materials Research 503-504 (April 2012): 855–58. http://dx.doi.org/10.4028/www.scientific.net/amr.503-504.855.

Full text
Abstract:
A research method of the deflection of throttle slice under the uniform distribution of variety load is presented. The analytical equation of slice deflection under the uniform distribution of variety load is deduced using the sheet mechanics according to the physical model of throttle slice, which is convenient for the theory analysis and engineering application. The correctness of equation is validated compared with finite element calculation results. The rules that different loads and the structure parameters and material characters of throttle slice influence on the deflection at any radiu
APA, Harvard, Vancouver, ISO, and other styles
19

He, Jie, Beibei Li, and Xiumei Liu. "Investigation of flow characteristics in the U-shaped throttle valve." Advances in Mechanical Engineering 11, no. 3 (2019): 168781401983049. http://dx.doi.org/10.1177/1687814019830492.

Full text
Abstract:
Experimental and numerical analysis of cavitation flow in the U-shaped throttle valve is presented in this article. Cavitation flow has been analyzed numerically using the volume of fluid model while the pictures are captured by a high-speed camera. The results reveal that the distribution of pressure is extremely inhomogeneous, and the pressure drop zone is mainly distributed in the narrow U-shaped groove. Cavitation bubble occurs around the orifice and develops continuously since the pressure drops. The nascent, developed, and collapsed zone of the cavitation within U-shaped throttle valve a
APA, Harvard, Vancouver, ISO, and other styles
20

LI, BEIBEI, WENHUA LI, MINGLI JIAO, BINGYANG WANG, and XIUMEI LIU. "ANALYSIS OF CAVITATION CHARACTERISTICS IN THROTTLE VALVE WITH DIFFERENT STRUCTURE PARAMETERS." Journal of Mechanics in Medicine and Biology 17, no. 03 (2016): 1750047. http://dx.doi.org/10.1142/s0219519417500476.

Full text
Abstract:
The pressure and cavitation characteristics of fluid through throttle valves with different structure parameters were investigated numerically using computational fluid dynamics. The mass flow rate, pressure drop, and the volume fraction of the vapor in the single and two-step throttle valve were computed. The cavitation regions were mainly distributed on the top of the valve rod and the corner of the valve seat in both of the different throttle valves. The size of cavitation region at the corner of the channel grows firstly, and then decrease with the decreasing opening degree. Furthermore, t
APA, Harvard, Vancouver, ISO, and other styles
21

Zuti, Zhang, Cao Shuping, Luo Xiaohui, Shi Weijie, and Zhu Yuquan. "New approach of suppressing cavitation in water hydraulic components." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, no. 21 (2016): 4022–34. http://dx.doi.org/10.1177/0954406216657847.

Full text
Abstract:
Cavitation frequently appears in high pressure water hydraulic components and leads to serious hydraulic erosions and horrible hydrodynamic noises. In this paper, a novel approach of suppressing cavitation was proposed, inducing the outlet pressure back to the orifice to improve the pressure distribution of throttle valves. In order to realize this approach, an optimized throttle valve chamber structure was designed. After that, the anticavitation performance of the valve was investigated. A theoretical cavitation cloud model was built based on bubble dynamics. In order to solve the mathematic
APA, Harvard, Vancouver, ISO, and other styles
22

KOŁODZIEJ, Szymon, Grzegorz LIGUS, Jarosław MAMALA, and Andrzej AUGUSTYNOWICZ. "Analysis of air flow velocity distribution in the intake system of an SI engine." Combustion Engines 169, no. 2 (2017): 152–57. http://dx.doi.org/10.19206/ce-2017-227.

Full text
Abstract:
The conditions of air flow in the intake determine power generated by the engine to a large extent. The biggest resistances in flow of the air sucked or pumped into the engine are generated by the throttle, which is at the same time the main component which allows for regulation of engine power. For the purpose of research conducted in this work, time density of engine work points in analyzed velocity profiles was determined with the use of Engine Road Load Simulator. Thanks to the knowledge of time velocity, it was possible to determine throttle positions at which the engine operates most fre
APA, Harvard, Vancouver, ISO, and other styles
23

Stadnik, Dmitry, Victor Sverbilov, Vladimir Ilyukhin, Alexander Igolkin, Maxim Balyaba, and Evgeniy Shakhmatov. "Study on Stability of Gas Pressure Regulator with a Built-In Silencer." Energies 16, no. 1 (2022): 372. http://dx.doi.org/10.3390/en16010372.

Full text
Abstract:
Gas pressure regulators are widely used in gas transportation and distribution systems. They are designed for deep pressure reduction and maintainance with high accuracy over a wide flow range. Operation at a high pressure drop is accompanied by a high level of noise, for reduction of which, silencers are used. However, installation of a noise suppressor into the regulator design has a significant impact on its static and dynamic characteristics. This can lead to a decrease of accuracy, loss of stability and occurrence of self-oscillations of the valve. These, in turn, lead to increasing noise
APA, Harvard, Vancouver, ISO, and other styles
24

Woods, W. A., and O. K. Sag. "A Study of Cylinder-to-Cylinder Distribution of Charge in a Six Cylinder Spark Ignition Engine." Journal of Engineering for Gas Turbines and Power 110, no. 3 (1988): 470–74. http://dx.doi.org/10.1115/1.3240144.

Full text
Abstract:
An experimental and theoretical study of inlet flow was carried out on a Ford V6 Zephyr four-stroke cycle spark ignition engine. Details of measurements of individual cylinder flows were made on one bank of three cylinders (Nos. 4, 5, and 6) over a range of engine speeds from 1500 to 3500 rpm and throttle positions, full (WOT) down to 1/4 position. The object of the investigation was, first, to determine experimentally the extent of the variation of flow rate from cylinder to cylinder with changes in throttle position and engine speed and, secondly, to determine whether the computer simulation
APA, Harvard, Vancouver, ISO, and other styles
25

Tian, Jia Lin, Zheng Liang, Lin Yang, Xue Qing Mei, Qing Gang Mei, and Yu An Jia. "Numerical Calculation of Throttle Nozzle Diameter Influence on Downhole Choke Flow Field." Applied Mechanics and Materials 80-81 (July 2011): 288–93. http://dx.doi.org/10.4028/www.scientific.net/amm.80-81.288.

Full text
Abstract:
With calculation results comparison of different throttle nozzle diameter value, This article analyses the flow field with throttle nozzle diameter variety of 1.0mm, 2.0mm, 2.4mm, 2.6mm, 2.8mm, 4.0mm, while the other parameters take same value (such as the inlet pressure is 20mpa, the outlet pressure is 10MPa, the temperature is 333k, and the well depth is about 2000m). the results present the influence upon downhole choke flow field including pressure, velocity, temperature distribution. The pressure field composed by minimum on the axis shows the pressure dropping change at the throttle nozz
APA, Harvard, Vancouver, ISO, and other styles
26

LIU, XIUMEI, JIE HE, JIYUN ZHAO, ZHENG LONG, WENHUA LI, and BEIBEI LI. "BIOFLUID FLOW THROUGH A THROTTLE VALVE: A COMPUTATIONAL FLUID DYNAMICS STUDY OF CAVITATION." Journal of Mechanics in Medicine and Biology 16, no. 03 (2016): 1650034. http://dx.doi.org/10.1142/s0219519416500342.

Full text
Abstract:
Biofluid flow through a throttle valve is investigated numerically and experimentally in our paper. Numerical studies are performed in order to obtain the mass flow rate through the valve under different operating conditions. Pressure drop behind the throttle valve and formation of the vortex flow downstream has been evaluated. The vortices were mainly distributed on top of the valve rod, the corner of the channel and the corner of the valve seat. When valve opening increases, the vortices grow and cause higher pressure drop. In other words, more energy is lost due to these growing vortices an
APA, Harvard, Vancouver, ISO, and other styles
27

Vanchugov, I. M., S. M. Vatuzov, K. S. Rezanov, and R. A. Shestakov. "MODERNIZATION OF THE NATURAL GAS LIQUEFACTION CYCLE AT GAS DISTRIBUTION STATIONS." Petroleum Engineering 21, no. 2 (2023): 139–50. http://dx.doi.org/10.17122/ngdelo-2023-2-139-150.

Full text
Abstract:
The possibility of developing the liquefied natural gas (LNG) market in the Russian Federation can be realized by increasing the projects of low-tonnage LNG production. The development of LNG production projects at gas distribution stations should be a priority, since in this case it is possible to implement various production schemes: expander, throttle or cycle with a vortex pipe. To assess the efficiency of the use of low-tonnage LNG production at gas distribution stations (GDS), the dynamics of changes in maximum and minimum pressure values in the main gas pipeline, as well as the distribu
APA, Harvard, Vancouver, ISO, and other styles
28

Akulshin, A. A., V. I. Shcherbakov, and I. R. Yarovoy. "MODELING THE FLOW DISTRIBUTION AND CONTROL VODOPJANIKHA STATIONS ON MASTROIANNI STAGE." Proceedings of the Southwest State University 22, no. 6 (2019): 81–91. http://dx.doi.org/10.21869/2223-1560-2018-22-6-81-91.

Full text
Abstract:
In this article the tasks of modeling the flow distribution are considered, and since the consumers of this system are pumping stations, the first place is put forward not social (as in the second rise), and economic (energy) criteria. The water pressure at the pump inlets is determined by the geodesic levels of the pumps. In wells can be installed various pumping equipment, different in pressure and performance, resulting in a significant difference in the pressure produced by the pumping equipment. In the wells can be installed various pumping equipment, different in pressure and performance
APA, Harvard, Vancouver, ISO, and other styles
29

Yang, Yu, Zhenping Feng, and Runda Lin. "A prediction method of temperature distribution and thermal stress for the throttle turbine rotor and its application." Thermal Science 21, suppl. 1 (2017): 267–74. http://dx.doi.org/10.2298/tsci17s1267y.

Full text
Abstract:
In this paper, a prediction method of the temperature distribution for the thermal stress for the throttle-regulated steam turbine rotor is proposed. The rotor thermal stress curve can be calculated according to the preset power requirement, the operation mode and the predicted critical parameters. The results of the 660 MW throttle turbine rotor show that the operators are able to predict the operation results and to adjust the operation parameters in advance with the help of the inertial element method. Meanwhile, it can also raise the operation level, thus providing the technical guarantee
APA, Harvard, Vancouver, ISO, and other styles
30

Farshidianfar, A., M. Ebrahimi, H. Rahnejat, M. T. Menday, and M. Moavenian. "Optimization of the high-frequency torsional vibration of vehicle driveline systems using genetic algorithms." Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics 216, no. 3 (2002): 249–62. http://dx.doi.org/10.1177/146441930221600305.

Full text
Abstract:
Vehicle drivelines with manual transmissions are exposed to different dynamic engine torques under driving conditions. Engine torque can dramatically vary with throttle demand from coast to drive condition and, conversely, with throttle release from drive to coast. Abrupt application or release of throttle in slow moving traffic or rapid engagement of the clutch can be followed by an audible response, referred to in industry as the clonk noise. This paper presents a complete dynamic model of a vehicle driveline for the optimization of high-frequency torsional vibration by the distributed-lumpe
APA, Harvard, Vancouver, ISO, and other styles
31

Babakin, A. D. "Reduction of Hydrate Formation During Gas Throttling Using a Throttle Chamber." Oil and Gas Technologies 147, no. 4 (2023): 50–54. http://dx.doi.org/10.32935/1815-2600-2023-147-4-50-54.

Full text
Abstract:
The analysis of the gas temperature change with a large drop on the shut-off valve forms a conclusion:the complete saturation of the gas with moisture present in it is the main condition for the occurrence of gas hydrates. In the process of gas preparation, the temperature of its dew point changes. A set of graphs of hydrate formation and dew points for specific parameters of the working medium form a range of values in which gas hydrates are formed. The proposed design of the throttle chamber allows you to reduce the pumping values to conditions that exclude hydrate formation. The calculation
APA, Harvard, Vancouver, ISO, and other styles
32

Li, Beibei, Ruirui Li, Xiumei Liu, Qiao Zhao, Jichao Ma, and Jie He. "Effects of operating parameters on flow force characteristics in a conical throttle valve." Industrial Lubrication and Tribology 74, no. 2 (2022): 251–57. http://dx.doi.org/10.1108/ilt-12-2020-0452.

Full text
Abstract:
Purpose Flow force is one of the crucial factors affecting the performance of conical throttle valves. The purpose of this paper is to determine the relationship between the flow force and operating parameters of the conical throttle valve. Design/methodology/approach The flow force of the throttle valve can be obtained by the difference between the axial force and static pressure on the valve spool. In this paper, the internal fluid is divided into two regions and the axial force and static pressure are obtained, respectively. In addition, a two-dimensional axisymmetric simulation model and e
APA, Harvard, Vancouver, ISO, and other styles
33

Tutunea, Dragos, Alexandru Oprica, Ana Maria Nicu, Diana Camelia Staicu, and Ilie Dumitru. "CFD and Structural Analysis of the Intake Manifold Flap of an Internal Combustion Engine." Applied Mechanics and Materials 880 (March 2018): 195–200. http://dx.doi.org/10.4028/www.scientific.net/amm.880.195.

Full text
Abstract:
The objective of this study is to analyze the flow filed in the intake manifold using Computational Fluid Dynamics (CFD). The main function of the intake manifold flap is to regulate the air flow and to uniformly distribute in the cylinders. If the air is distributed uneven to the engine the volumetric efficiency, power and fuel consumption is reduced. The finite element method can be used to optimize the throttle flap. The results in the simulation offer valuable information’s of the flow field in the throttle assembly. The results show that the CFD model can be used as a tool for improve and
APA, Harvard, Vancouver, ISO, and other styles
34

Yang, Yu, and Xing Jin. "Simulation analysis of cooperative motion fuzzy control of distributed lifting units." Journal of Physics: Conference Series 2087, no. 1 (2021): 012050. http://dx.doi.org/10.1088/1742-6596/2087/1/012050.

Full text
Abstract:
Abstract In the technology of hydraulic lifting system, it is not only necessary to ensure that the displacement and velocity accuracy of each hoist reach a certain value, but also to ensure that under the control of load balance to make each hoist smooth lift. In the conventional method, the PID control method can realize the synchronization of the function. However, the system cannot be controlled and adjusted in real time during the control parameter period, resulting in instability and uncertainty of the system. Aiming at this problem, this paper adds the fuzzy adaptive controller to carry
APA, Harvard, Vancouver, ISO, and other styles
35

R, Murugesan*1 Dr M. Vijayaraj2 &. Dr. K. Vetrivel. "MULTI ATTRIBUTE MINIMUM THROTTLE APPROXIMATION BASED SINKHOLE DETECTION IN MOBILE ADHOC NETWORKS." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 6 (2017): 455–63. https://doi.org/10.5281/zenodo.814697.

Full text
Abstract:
The presence of sinkhole attack in mobile adhoc network affects the quality of service of the network and the problem of mitigating sinkhole attack has been handled with different strategies. Still the methods suffers to achieve the mitigation performance and to overcome this issue, an efficient multi attribute minimum throttle approximation algorithm is presented in this paper. The method performs mitigation of sink hole attacks in distributed manner which improves the quality of service of the network. Each node maintains the trace about node energy, node location, displacement speed, and nu
APA, Harvard, Vancouver, ISO, and other styles
36

Du, Qiuying, Mingzhong Li, Chenwei Liu, and Sanbao Dong. "Numerical Simulation of Superheated Steam Flow and Heat Transfer in a Balanced Steam Injection Flow Control Device." Geofluids 2023 (May 12, 2023): 1–7. http://dx.doi.org/10.1155/2023/9271981.

Full text
Abstract:
Dual-string steam injection pipe is widely used in the production of superheated steam injection in heavy oil horizontal wells. Due to the nonuniform steam injection volume at the heel end and the existence of an interlayer and other factors in the reservoir, the distribution of steam cavity is not uniform, so it is necessary to control the flow of the steam injection well. Based on the basic principles of fluid mechanics and heat transfer, a three-phase nozzle outflow control device model is established in this paper. The steam flow and heat transfer law in the flow control device is numerica
APA, Harvard, Vancouver, ISO, and other styles
37

Buranov, M. D., A. A. Mukolyants, and I. V. Sotnikova. "Generation of electrical energy at gas pipelines using a transported natural gas technological pressure drop." E3S Web of Conferences 139 (2019): 01089. http://dx.doi.org/10.1051/e3sconf/201913901089.

Full text
Abstract:
The article discusses the possibilities of generating electricity without burning fuel by expanding high-pressure natural gas at gas distribution stations with lower specific capital costs. It is proposed to reduce the pressure of the transported natural gas using expander-generator units instead of traditional throttle devices.
APA, Harvard, Vancouver, ISO, and other styles
38

Altaher, Mohamed A., Karamat Mohammed Mohammed, and Hu Li. "Particulate Emissions and Size Distributions of Biofuel in Micro Gas Turbine Engine." International Science and Technology Journal 27, no. 1 (2024): 1–18. http://dx.doi.org/10.62341/mkhu13324.

Full text
Abstract:
Atmospheric CO2 has been reported to be on a rapid increase in recent times mainly due to the rising consumption of fossil fuel for anthropogenic activities. Currently the situation is that of the 25% fossil fuel consumption by the transportation sector, aviation sector consumes about 13% of transport fuel consumption, which is the second biggest sector after road transportation. Therefore, the applications of biofuels have been increased in aviation. The aim of this work is to investigate and compare biodiesel and its blends with syntactic kerosene. The pollutants of particulate emissions and
APA, Harvard, Vancouver, ISO, and other styles
39

Aminov, Rashid, and Alexandr Moskalenko. "Efficiency of steam turbines with bypass steam distribution for primary frequency control in power systems." Energy Safety and Energy Economy 5 (October 2021): 9–17. http://dx.doi.org/10.18635/2071-2219-2021-5-9-17.

Full text
Abstract:
This paper evaluates efficiency of steam turbines with bypass steam distribution involved in a process of primary frequency control in power systems. We calculated power of a steam turbine and power unit in general, and absolute electrical efficiency for both bypass and throttle steam distribution. It was found that bypass steam distribution increases absolute electrical efficiency of steam-gas units while operation under lower capacity. Economic indicators calculated for combined cycle gas units confirm effectiveness of steam turbines with bypass steam distribution involved in primary frequen
APA, Harvard, Vancouver, ISO, and other styles
40

Zedgenizov, Dmitry. "CHOICE OF QUALITY FACTORS OF AUTOMATIC CONTROL OF UNDERGROUND VENTILATIION." Interexpo GEO-Siberia 2, no. 4 (2019): 33–37. http://dx.doi.org/10.33764/2618-981x-2019-2-4-33-37.

Full text
Abstract:
The analysis of main quality factors of automatic control under the position of its application in control of ventilation at underground of small depth is carried out. The choice of quality factors list of automatic control of regulating system of tunnel ventilator rotor speed and regulating system of throttle angle of air distribution controller is justified.
APA, Harvard, Vancouver, ISO, and other styles
41

Guo, Ling, Yayong Wang, Xiaohui Xu, Han Gao, Hong Yang, and Guoqing Han. "Study on the Erosion of Choke Valves in High-Pressure, High-Temperature Gas Wells." Processes 10, no. 10 (2022): 2139. http://dx.doi.org/10.3390/pr10102139.

Full text
Abstract:
During the process of gas production in high-pressure, high-temperature (HPHT) gas wells, the choke valve, as the most vital component of the surface control equipment, plays a significant role in regulating the output and reducing the fluid pressure to ensure the safety of surface gathering and transportation equipment. High-pressure, high-velocity fluid flow and solid-phase particles cause deterioration of the choke valve. With the enhancement of intelligent and digital oilfields, conventional choke valves have been progressively replaced by electric choke valves. Due to the complex structur
APA, Harvard, Vancouver, ISO, and other styles
42

Tang, Jie, Dian Rong Gao, and Li Wen Wang. "Research on Influence of Parameters Variation on the Fixed Orifice Performance of the Servo-Valve." Applied Mechanics and Materials 157-158 (February 2012): 612–16. http://dx.doi.org/10.4028/www.scientific.net/amm.157-158.612.

Full text
Abstract:
In this paper, The finite element analysis software is applied to compute the flow field in the fixed orifice with different structural parameter combinations, the pressure distribution curve, the velocity distribution curve, flow rate characteristic, power loss are obtained. By analyzing simulation results, the influence of the orifice parameters on the performance of the orifice is clear. The research is important for the design and optimization of the fixed throttle orifice of the nozzle-flapper valve.
APA, Harvard, Vancouver, ISO, and other styles
43

Wan, Hui Xiong, Hong Jie Xia, and Hai Bo Huang. "Research on Multi-Actuators Speed Control System in Large-Scale Ship." Applied Mechanics and Materials 16-19 (October 2009): 1138–42. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.1138.

Full text
Abstract:
For multi-actuators speed control system driven by single pump, several effective control methods have been proposed, such as flow feedback control, etc. These methods are effective only to the engineering equipment with fewer actuators. As for large ships with more than ten actuators required for speed control, using traditional control methods will result in that costs much, the structure of the hydraulic system is very complicated, even unable to realize. In order to meet the coordinate action of many actuators, two ways based on throttle control and pressure compensation control are introd
APA, Harvard, Vancouver, ISO, and other styles
44

Wan, Hui Xiong, Hui Huang, and Hai Bo Huang. "Research on Multi-Actuators Speed Control Methods in Large-Scale Vessel." Key Engineering Materials 419-420 (October 2009): 85–88. http://dx.doi.org/10.4028/www.scientific.net/kem.419-420.85.

Full text
Abstract:
For multi-actuators speed control system driven by single pump, several effective control methods have been proposed, such as flow feedback control, etc. These methods are effective only to the engineering equipment with fewer actuators. As for large vessels with more than ten actuators required for speed control, using traditional control methods will result in that costs much, the structure of the hydraulic system is very complicated, even unable to realize. In order to meet the coordinate action of many actuators, two ways based on throttle control and pressure compensation control are intr
APA, Harvard, Vancouver, ISO, and other styles
45

Artyomovich, Mukolyants Arsen, Buranov Mardon Davronovich, Sotnikova Irina Vladimirovna, and Аzimova Munira Muminovna. "Analysis of the influence of the input parameters on the efficiency of the operation of the detander generator unit in the gas network system of the republic of Uzbekistan." E3S Web of Conferences 216 (2020): 01130. http://dx.doi.org/10.1051/e3sconf/202021601130.

Full text
Abstract:
The article is devoted to the generally recognized dilemma of using secondary energy resources in the transportation and distribution of natural gas. At stations where throttle devices are used, excessive gas pressure as the main component of secondary energy resources for technological processes is practically not used. Currently, the replacement of throttle devices with turbo-expander units is determined by energy and economic efficiency. This is due to the fact that the use of excess gas pressure in the turbo expander both at gas distribution stations and at compressor stations of gas pipel
APA, Harvard, Vancouver, ISO, and other styles
46

Sun, Chaoxiang, Dezhe Wang, Hailin Liu, Yatao Xiao, Wei Guo, and Bing Liu. "Simulation and Optimization of the Throttle Releaser in Aerated Irrigation Systems." Agriculture 14, no. 8 (2024): 1248. http://dx.doi.org/10.3390/agriculture14081248.

Full text
Abstract:
Aerated irrigation is an emerging and efficient irrigation technique, and the throttle-squeeze releaser (TS releaser) is a commonly used key component in aerated irrigation devices. However, it has issues such as large bubble size, uneven distribution, and low dissolved-oxygen content in the irrigation water. Given these problems, this study optimized the valve chamber and throat structure of the releaser based on the TS releaser, designing three different types of releasers with W-shaped valve chamber, arc-shaped valve chamber, and multi-throat W-shaped valve chamber. The simulation results,
APA, Harvard, Vancouver, ISO, and other styles
47

Zhang, Jian. "Flow characteristics of a hydraulic cone-throttle valve during cavitation." Industrial Lubrication and Tribology 71, no. 10 (2019): 1186–93. http://dx.doi.org/10.1108/ilt-10-2018-0394.

Full text
Abstract:
Purpose This paper aims to resolve the cavitation problem encountered in cone throttle valves concerning fluid flow performance and pitting from cavitation luminescence, the author studied the flow field within a cone throttle valve set with various valve openings, inlet pressures and outlet back pressures. Design/methodology/approach The flow and cavitation distribution in the valve under different pressure conditions were obtained in simulations. To confirm these results experimentally, a hydraulic cavitation platform was constructed. The valve was made of polymethyl methacrylate material wi
APA, Harvard, Vancouver, ISO, and other styles
48

Matiwure, Terence, and Arthur Ndlovu. "ENHANCING THROTTLED LOAD BALANCING ALGORITHM WITH MACHINE LEARNING FOR DYNAMIC RESOURCE ALLOCATION IN CLOUD COMPUTING ENVIRONMENTS." International Journal of Computer Science and Mobile Computing 14, no. 6 (2025): 20–25. https://doi.org/10.47760/ijcsmc.2025.v14i06.003.

Full text
Abstract:
Efficient load balancing in cloud environments is critical to ensuring low response time, optimal execution time, high resource utilization, and evenly distributed server workloads. Inadequate load balancing, often due to limited integration of intelligent decision-making, can result in delayed responses and dissatisfied clients. This research proposes an intelligent enhancement to the throttled Weighted Round Robin (WRR) load balancing algorithm using Machine Learning (ML). The enhanced load balancer employs a Gradient Boosting Regressor—a tree-based machine learning model—to predict the most
APA, Harvard, Vancouver, ISO, and other styles
49

Siami, Milad, and Joelle Skaf. "Structural Analysis and Optimal Design of Distributed System Throttlers." IEEE Transactions on Automatic Control 63, no. 2 (2018): 540–47. http://dx.doi.org/10.1109/tac.2017.2728002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

SHALINI, JOSHI, and KUMARI UMA. "IMPROVING LOAD DISTRIBUTION IN THROTTLED ALGORITHM BY DYNAMIC THRESHOLD BASED LOAD BALANCING." i-manager's Journal on Information Technology 6, no. 3 (2017): 36. http://dx.doi.org/10.26634/jit.6.3.13783.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!