Relevant bibliographies by topics / Thyristor Bridge

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Thyristor Bridge'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Thyristor Bridge.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Thyristor Bridge"

1

Chyzhenko, O. I., and O. B. Rybina. "STUDY OF TRANSIENT PROCESSES IN THE CIRCUIT OF A CONDITIONALLY-TWELVEPHASE THYRISTOR COMPENSATOR FOR THE CORRECTION OF TRANSIENT START-UP MODES IN THE ELECTRICAL NETWORK." Praci Institutu elektrodinamiki Nacionalanoi akademii nauk Ukraini 2022, no. 63 (2022): 58–64. http://dx.doi.org/10.15407/publishing2022.63.058.

Full text
Abstract:
Electromagnetic transient processes in a network with a conventionally twelve-phase thyristor compensator designed to adjust the value of the starting transient current of the network in the case of direct start from the network of asynchronous motors of comparable power to the network with a jump-like change in the control angle of the thyristors in the bridges were studied. A comparison was made with such a change in the control angle of thyristors of transient currents in the circuits of a two-bridge controlled thyristor compensator with parallel connection of bridges with transient current
APA, Harvard, Vancouver, ISO, and other styles
2

Vladimir, Dj. Vukić, and Dj. Prole Rajko. "DIAGNOSTICS OF THE THYRISTOR BRIDGE FAULT BASED ON THE DETECTION OF THE LINE-FREQUENCY SECOND HARMONIC IN THE OUTPUT CURRENT OF AN AC/DC CONVERTER." Tehnika 67, no. 1 (2018): 99–105. https://doi.org/10.5937/tehnika1801097V.

Full text
Abstract:
In this paper was presented the technical procedure implemented for the fault diagnostics of the thyristor bridge in an АС/DC converter. During the development of the new generation of digital controllers for AC/DC converters, it was required for these devices to have a possibility for a real-time detection of the thyristor converter fault. Thyristor bridge fault should be detected without the need for the state monitoring of the particular power semiconductor switches or rapid fuses. Thyristor bridge fault was identified using the measurement of the line-frequency second harmonic in the recti
APA, Harvard, Vancouver, ISO, and other styles
3

Ogboi, Williams Uwabor, C. Idoniboyeobu D., and L. Braide S. "Performance Analysis of a Direct Current Motor Speed Control using Single-Phase H-Bridge Thyristor Rectifier." Journal of Recent Trends in Electrical Power System 6, no. 2 (2023): 5–13. https://doi.org/10.5281/zenodo.7947278.

Full text
Abstract:
<em>Direct Current (D.C.) motor is an important drive configuration for many applications that is required in automation movements. Thyristors are used to regulate the supply voltage in order to control the speed of the direct current motor. Thyristors have problem of overheating during installation hence, the need for a better cooling means via heat sink which reduces the heat level of the semiconductor for proper performance and good efficiency of the system. The aim of this research is to analyze the performance of a direct current motor speed using Thyristor. Armature Voltage Control metho
APA, Harvard, Vancouver, ISO, and other styles
4

Pirozhenko, Andrii, Yevhenii Modlo, Ruslan Shaida, Viktor Batarieiev, Mykola Zhukov, and Mykhailo Drukker. "Principle of Organization for Laboratory Stand of the Electric Drive with a Real Regulatory System No Time Scaling." SHS Web of Conferences 100 (2021): 06002. http://dx.doi.org/10.1051/shsconf/202110006002.

Full text
Abstract:
The existing practical training of specialists in the field of the electric drive is recognized as insufficient, not allowing them to conduct independently a complex of adjustment works or works on elimination of refusals. All known virtual methods of research of electric drives are scaled in time therefore at the trained skills on use of the measuring and registering devices during the work on real installation don't develop, and also skills on work with real knots of control systems for control of the set drive modes. We propose a stand consisting of a real system of regulation and the model
APA, Harvard, Vancouver, ISO, and other styles
5

Das, Bhaba P., Neville R. Watson, and Yonghe Liu. "Experimental Evaluation on the Influence of RCD Snubbers in a 3-Level Thyristor Based MLCR CSC." Journal of Engineering 2016 (2016): 1–18. http://dx.doi.org/10.1155/2016/2490926.

Full text
Abstract:
Multilevel current reinjection (MLCR) concept provides self-commutation capability to thyristors, enabling thyristor based current source converters (CSC) to operate under negative firing angle. It also lowers the input current harmonic distortion. This is achieved by using an auxiliary reinjection bridge. Extensive experimental results are presented in this paper to analyse the performance of the 3-level MLCR CSC for different snubber components across the reinjection bridge. The trade-off in the choice of the snubber circuit is illustrated, with its influence on the AC side line current and
APA, Harvard, Vancouver, ISO, and other styles
6

Gałuszkiewicz, Patryk, Zbigniew Gałuszkiewicz, and Janusz Baran. "Simulation Studies of Energy Recovery in a BLDC Motor-Based Kinetic Energy Storage." Energies 15, no. 20 (2022): 7494. http://dx.doi.org/10.3390/en15207494.

Full text
Abstract:
This paper presents research conducted on the development of an innovative system to increase the amount of energy recovered from a high-speed kinetic energy storage based on a three-phase permanent magnet brushless (PM BLDC) motor/generator (mogen) with a flywheel-shaped rotor, compared to the efficiency obtained for standard solutions with power electronics systems. This kinetic energy storage is currently under development. In the system presented in the paper, the regulated DC output voltage of the 6T thyristor bridge is controlled with a tolerance within ±10% of the reference voltage for
APA, Harvard, Vancouver, ISO, and other styles
7

Vladimir, Dj. Vukić. "Influence of interphase transformers and ac line reactances on the thyristor bridges' current sharing in 18-pulse rectifiers." Proceedings, Electrical Engineering Institute "Nikola Tesla" / Zbornik radova, Elektrotehnički institut "Nikola Tesla" 25, no. 1 (2015): 1–30. https://doi.org/10.5937/zeint25-9150.

Full text
Abstract:
In this paper, computer simulation models of two different topologies of 18-pulse rectifiers are presented. Each rectifier topology consists of three parallel, three-phase six-pulse full-bridge thyristor converters connected via interphase transformers. The influence of the interphase transformer&#39;s layout and AC line reactances variations on the particular thyristor converter current sharing is analysed. Various configurations of 18-pulse rectifiers are examined by simulating operation with symmetric input voltage supply, as well as in the cases of different levels of voltage supply asymme
APA, Harvard, Vancouver, ISO, and other styles
8

Mendybayev, Sergazy, Yermek Sarsikeyev, and Dameli Kapanova. "Control of Valve Converters with Natural Current Characteristics." MATEC Web of Conferences 155 (2018): 01047. http://dx.doi.org/10.1051/matecconf/201815501047.

Full text
Abstract:
The article considers the valve converter with a natural current characteristic, which is called the current of parametric, for which the primary is not the source of the electric force but a parametric source of current, to the output of which connected to the counter-parallel thyristor sets assembled on the bridge scheme. The control of thyristors in the current converter is carried out taking into account the characteristic features of the parametric source, to avoid overvoltage on its reactive elements, analyzed algorithmic and modulating functions of the system borne temporary diagrams.
APA, Harvard, Vancouver, ISO, and other styles
9

Kazuno, Hiroshi. "Forced commutation thyristor bridge using pulse transformer." Electrical Engineering in Japan 106, no. 1 (1986): 122–31. http://dx.doi.org/10.1002/eej.4391060114.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Nizov, Anatoly S., Andrey N. Shtin, Konstantin G. Shumakov, and Dmitry V. Lesnikov. "Operation modes of a semiconductor voltage-boosting device for voltage regulation at traction substations." Innotrans, no. 4 (2022): 58–64. http://dx.doi.org/10.20291/2311-164x-2022-4-58-64.

Full text
Abstract:
One of the ways to strengthen the DC power supply system of the main railways of Russia is the use of semiconductor voltage-boosting devices for voltage regulation at traction substations. The work of diode and thyristor bridge rectifiers connected in series with it is considered in the article. The analysis is performed under the condition that active and reactive resistances of the supply network and the converter transformer are zero. It was found out that, depending on the magnitude of the control angle, such a converter can have two modes of operation. For these modes, time diagrams of th
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Thyristor Bridge"

1

Perera, Lasantha Bernard. "Multi Level Reinjection ac/dc Converters for HVDC." Thesis, University of Canterbury. Electrical and Computer Engineering, 2006. http://hdl.handle.net/10092/1085.

Full text
Abstract:
A new concept, the multi level voltage/current reinjection ac/dc conversion, is described in this thesis. Novel voltage and current source converter configurations, based on voltage and current reinjection concepts are proposed. These converter configurations are thoroughly analyzed in their ac and dc system sides. The fundamentals of the reinjection concept is discussed briefly, which lead to the derivation of the ideal reinjection waveform for complete harmonic cancellation and approximations for practical implementation. The concept of multi level voltage reinjection VSC is demonst
APA, Harvard, Vancouver, ISO, and other styles
2

Zabihi, Sasan. "Flexible high voltage pulsed power supply for plasma applications." Thesis, Queensland University of Technology, 2011. https://eprints.qut.edu.au/48137/1/Sasan_Zabihi_Sheykhrajeh_Thesis.pdf.

Full text
Abstract:
Demands for delivering high instantaneous power in a compressed form (pulse shape) have widely increased during recent decades. The flexible shapes with variable pulse specifications offered by pulsed power have made it a practical and effective supply method for an extensive range of applications. In particular, the release of basic subatomic particles (i.e. electron, proton and neutron) in an atom (ionization process) and the synthesizing of molecules to form ions or other molecules are among those reactions that necessitate large amount of instantaneous power. In addition to the decompositi
APA, Harvard, Vancouver, ISO, and other styles
3

Butros, Peter. "Simulations of Rotating Brushless AC Excitation System with Controlled Thyristor Bridge Rectifier for Hydropower Generators." Thesis, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-166403.

Full text
Abstract:
This thesis aims to simulate and find out more about the electrical dynamics of a six-phase exciter for hydropower generators. Because ordinary electric circuit-based simulation software only simulate three-phase electrical systems, a FEM-based software is used for the electrical dynamics simulations of the six-phase system. The objective is to analyse the pulsation behaviour of the rectified electrical output on the six-phase system and compare it to the three-phase system. The three-phase system is also simulated with filters with the aim of decreasing the amplitude of the pulsations on the
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Thyristor Bridge"

1

Khan, Abdul Nauman. Voltage control of a three-phase bridge converter using GTO thyristor by-pass devices. 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Thyristor Bridge"

1

Eya, Candidus U., Benjamin N. Ugwu, Gerald C. Diyoke, and Chikani Nonso.I. "Performance Evaluation of Varying Triggering Angles on Single-Phase Semi-Bridge Controlled AC-DC Converter." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde221191.

Full text
Abstract:
This paper presents performance evaluation of varying triggering angles on single-phase semi bridge controlled AC-DC Converter, which are, dependent on the deferment angles. This article is meant for adequately identifying the better range of deferment or delay angles for controlled rectification for optimal performance of the single-phase half wave AC–to-DC converter. The single-phase half wave controlled rectifier is formed by combination of thyristor power switch, power cables and triggering circuit in the presence of supply voltage and the load/s. This article is also used to find out the
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Thyristor Bridge"

1

Pallantla, Manikanta, and Prince Kumar. "A Line-Commutated Thyristor Bridge Emulated Rotating Power Electronic Converter (LCTEPC) with Mode-Switching Algorithm for Brushless Exciter Applications." In 2025 IEEE Texas Power and Energy Conference (TPEC). IEEE, 2025. https://doi.org/10.1109/tpec63981.2025.10906868.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ramos, Marcos Leonardo, José Maria De Carvalho Filho, Ângelo José Junqueira Rezek, Christel Enock Ghislain Ogoulola, and Vinicius Zimmermann Silva. "Eight Thyristor AC-DC Modified Converter Bridge Implementation." In Simpósio Brasileiro de Sistemas Elétricos - SBSE2020. sbabra, 2020. http://dx.doi.org/10.48011/sbse.v1i1.2496.

Full text
Abstract:
The purpose of this work is to implement at laboratory a full-controlled AC-DC test bench operating as a modified bridge and a conventional bridge, considering for both bridge the same average DC output voltage criterion. Furthermore, the performance of the test bench can be verified by checking the consistency of the experimental results between the modified bridge and the conventional bridge, as well as the consistency of the experimental results of these bridges with their theoretical values and digital simulations. It is expected the test bench can be applied for didactic and research purp
APA, Harvard, Vancouver, ISO, and other styles
3

Moosavi, Seyed Saeid, Abdesslem Djerdir, Youcef Ait-Amirat, and Davod Arab Khaburi. "Fault detection investigation in a full bridge thyristor base AC-DC converter." In IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2013. http://dx.doi.org/10.1109/iecon.2013.6700502.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rozhkov, Alexander N., Mikhail G. Astashev, and Pavel A. Rashitov. "The influence of control methods of AC thyristor bridge on its switching modes." In 2016 17th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM). IEEE, 2016. http://dx.doi.org/10.1109/edm.2016.7538796.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Peng, Stephen J. Finney, and Derrick Holliday. "Thyristor based modular multilevel converter with active full-bridge chain-link for forced commutation." In 2016 IEEE 17th Workshop on Control and Modeling for Power Electronics (COMPEL). IEEE, 2016. http://dx.doi.org/10.1109/compel.2016.7556658.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Pallantla, Manikanta, Jeyaram Durga Manian Deivanayagam, Sreekanth Thamballa, and Ned Mohan. "A Line Commutated - Thyristor Bridge Emulated Rotating Power Electronic Converter for Brushless Exciter Applications." In 2020 IEEE 21st Workshop on Control and Modeling for Power Electronics (COMPEL). IEEE, 2020. http://dx.doi.org/10.1109/compel49091.2020.9265818.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Delfino, F., F. Fornari, S. Massucco, A. Morini, and R. Procopio. "Compensation of voltage sags in a radial network feeding a thyristor bridge controlled load." In 2005 IEEE Russia Power Tech. IEEE, 2005. http://dx.doi.org/10.1109/ptc.2005.4524511.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Borodulin, Mikhail Y. "Electromagnetic Transient Models of Bridge Thyristor Converters for Multirate Simulation of Large Power Systems." In 2022 IEEE/PES Transmission and Distribution Conference and Exposition (T&D). IEEE, 2022. http://dx.doi.org/10.1109/td43745.2022.9816966.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Mirzaee, Hesam, Subhashish Bhattachary, and Sandeep Bala. "Design issues in a medium-voltage DC amplifier with a multi-pulse thyristor bridge front-end." In 2012 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2012. http://dx.doi.org/10.1109/ecce.2012.6342766.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kunakorn, A. "Transient voltage distribution and interturn voltages in a generator during the commutation of a thyristor bridge load." In 9th International Conference on Electrical Machines and Drives. IEE, 1999. http://dx.doi.org/10.1049/cp:19991019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Thyristor Bridge' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography