Relevant bibliographies by topics / Ti-C-V

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Ti-C-V'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Ti-C-V.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Ti-C-V"

1

Han, Ruyang, Gengwei Yang, Deming Xu, Lu Jiang, Zhixiang Fu, and Gang Zhao. "Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel." Materials 15, no. 17 (2022): 5965. http://dx.doi.org/10.3390/ma15175965.

Full text
Abstract:
In this work, the precipitates in Ti−Mo−V steel were systematically characterized by high-resolution transmission electron microscopy (HRTEM). The thermodynamics and kinetics of precipitates in Ti−Mo and Ti−Mo−V steels were theoretically analyzed, and the effect of vanadium on the precipitation behavior was clarified. The results showed that the precipitation volume fraction of the Ti−Mo−V steel was significantly higher than that of Ti−Mo steel. The randomly dispersed precipitation and interphase precipitation (Ti, Mo, V)C particles coexisted in the Ti−Mo−V steel. When the temperature was high
APA, Harvard, Vancouver, ISO, and other styles
2

Xie, You, Guoguang Cheng, Lie Chen, Yandong Zhang, and Qingzhong Yan. "The Characteristics and Generating Mechanism of Large Precipitates in Ti-Containing H13 Tool Steel." High Temperature Materials and Processes 36, no. 2 (2017): 189–95. http://dx.doi.org/10.1515/htmp-2015-0177.

Full text
Abstract:
AbstractThe characteristics of large precipitates in H13 tool steel with 0.015wt% Ti were studied. The result shows that three types of phases larger than 1 μm exist in the as-cast ingot, that is, (Ti, V) (C, N) type phase, (V, Mo, Cr)C type phase and sulfide. (Ti, V) (C, N) type phase could be further classified as the homogeneous Ti-rich one and the Ti-V-rich one in which Ti/V ratio gradually changes. (V, Mo, Cr)C type phase contains the V-rich one and the Mo-Cr-rich one. The compositional characteristics in all of them have little relation with the cutting position or cooling rate. The prec
APA, Harvard, Vancouver, ISO, and other styles
3

Bursík, J. "Transformation of the β-(Ti,V) phase in Ti-V-C alloys". Scripta Materialia 40, № 12 (1999): 1381–86. http://dx.doi.org/10.1016/s1359-6462(99)00074-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

HUANG, LUJUN, FUYAO YANG, YONGLIANG GUO, JIE ZHANG, and LIN GENG. "EFFECT OF SINTERING TEPMERATURE ON MICROSTRUCTURE OF Ti6Al4V MATRIX COMPOSITES." International Journal of Modern Physics B 23, no. 06n07 (2009): 1444–48. http://dx.doi.org/10.1142/s021797920906107x.

Full text
Abstract:
( TiBw + TiCp )/ Ti 6 Al 4 V composites were fabricated by reactive hot-pressing at the temperature range of 800~1200°C using the starting materials of TiB 2, C and Ti 6 Al 4 V powders. The XRD results suggested that the reaction between C and Ti happened 900°C and above, while the reaction between TiB 2 and Ti happen at 1100°C and above. SEM results also suggested that the reaction between C and Ti was prior to that between TiB 2 and Ti . With the increase of the sintering temperature, the size of TiC particle and TiB whisker reinforcements increased gradually. The TiC particle was formed at
APA, Harvard, Vancouver, ISO, and other styles
5

Chang, Woong-Seong, and B. C. Muddle. "Precipitation of (Ti,V)2Al(C,N) in multiphase Al-Ti-V alloys." Materials Science and Engineering: A 207, no. 1 (1996): 64–71. http://dx.doi.org/10.1016/0921-5093(96)80003-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kwon, Hanjung, Sun-A. Jung, Chang-Yul Suh, Ki-Min Roh, and Wonbaek Kim. "Mechanical properties of (Ti,V)C–Ni composite prepared using ultrafine solid-solution (Ti,V)C phase." Ceramics International 40, no. 8 (2014): 12579–83. http://dx.doi.org/10.1016/j.ceramint.2014.04.064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Balart, M. J., Claire L. Davis, Martin Strangwood, and J. F. Knott. "Cleavage Initiation in Ti-V-N and V-N Microalloyed Forging Steels." Materials Science Forum 500-501 (November 2005): 729–36. http://dx.doi.org/10.4028/www.scientific.net/msf.500-501.729.

Full text
Abstract:
The effects of matrix microstructure and features of non-metallic inclusion (morphology, type, volume fraction and size) on cleavage initiation in medium-carbon Ti-V-N and V-N microalloyed resulphurized forging steels have been determined by examining fracture surfaces produced in room temperature Charpy impact tests. The steels were generally Al-deoxidised but one V-N steel was Si-deoxidised. It has been found that, in the Ti-treated steel, having a ferrite-pearlite microstructure, brittle fracture initiation occurred at cracked coarse (Ti,V)(C,N) single phase or [(Ti,V)(C,N)/Al2O3/MnS] multi
APA, Harvard, Vancouver, ISO, and other styles
8

Xie, You, Xiaoling Meng, Xiangyang Deng, and Shichao Li. "Large (Ti, V) Carbonitride in Nonquenched and Tempered Steel 38MnVS6." Advances in Materials Science and Engineering 2022 (August 30, 2022): 1–10. http://dx.doi.org/10.1155/2022/7281399.

Full text
Abstract:
Large (Ti, V) carbonitrides with size even up to tens of microns in autoparts steel 38MnVS6 are studied in this work. A great number of micron-sized (Ti, V) carbonitrides are found in continuous casting billet, and the atomic ratios of V/Ti are mainly distributed in range 0.130–0.200 with an average value of 0.171. The large (Ti, V) carbonitrides have irregular morphologies, and some even have an obviously extending shape along the dendrite boundary. 3D morphologies of the large (Ti, V) carbonitride after being etched by AA solution present obvious long and flake shapes. The large (Ti, V) carb
APA, Harvard, Vancouver, ISO, and other styles
9

Aydinyan, Sofiya. "Combustion Synthesis of MAX Phases: Microstructure and Properties Inherited from the Processing Pathway." Crystals 13, no. 7 (2023): 1143. http://dx.doi.org/10.3390/cryst13071143.

Full text
Abstract:
The MAX phases exhibit outstanding combination of strength and ductility which are unique features of both metals and ceramics. The preparation of pure MAX phases has been challenging due to the thermodynamic auspiciousness of intermetallic formation in the ternary systems. This review demonstrates the power of the self-propagating, high-temperature synthesis method, delivers the main findings of the combustion synthesis optimization of the MAX phases, and reveals the influence of the combustion wave on the microstructure features thereof. The possibility of using elements and binary compounds
APA, Harvard, Vancouver, ISO, and other styles
10

Sura, Vivek M., and D. L. Kohlstedt. "Inelastic deformation of (Ti, V)C alloys." Journal of Materials Science 21, no. 7 (1986): 2347–55. http://dx.doi.org/10.1007/bf01114278.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Ti-C-V"

1

Maline, Mohammed. "Nanocomposites codéposés par C. V. D. Dans le système Ti-Si-C." Perpignan, 1993. http://www.theses.fr/1993PERP0159.

Full text
Abstract:
Des codepots sic-ceramique ont ete prepares par depot chimique en phase vapeur sur un substrat de graphite, a la pression atmospherique, a partir d'un melange gazeux initial de c#4h#1#0sih#2cl#2ticl#4h2. Ils sont triphases: sicticc ou biphases sictisi#2 selon que la temperature de codeposition est comprise entre 1150 et 950 ou entre 900 et 850c. Ces materiaux sont des nanocomposites dont la caracterisation physicochimique n'a ete possible qu'au prix d'un recoupement de diverses donnees d'analyses spectroscopiques: microsonde epma-wds, auger, micro-raman, diffraction des rayons x et de microsco
APA, Harvard, Vancouver, ISO, and other styles
2

Lutsyk, V. I., and V. P. Vorob’eva. "3D Computer Models of Mo-Zr-V, Ti-C-V, Ti-Ir-Ru T-x-y Diagrams with Three-phase Reaction Type Changing." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35376.

Full text
Abstract:
Temperature and concentration borders of experimentally discovered effects of three-phase reactions type changing in systems Mo-Zr-V, Ti-C-V, Ti-Ir-Ru had been determined and confirmed by their T-x-y diagrams 3D computer models. Such kind effects had been found also in other three-phase regions of systems Ti-C-V and Ti-Ir-Ru. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/35376
APA, Harvard, Vancouver, ISO, and other styles
3

Danjoy, Christine. "Complexes du titane et du vanadium vers le système céramique quaternaire V. Ti. C. N par dépôt chimique en phase vapeur." Toulouse, INPT, 1996. http://www.theses.fr/1996INPT015G.

Full text
Abstract:
Cette these rend compte d'une etude de faisabilite d'une ceramique quaternaire carbonitrure de titane et de vanadium (v. Ti. C. N. ), par depot chimique en phase vapeur a partir de precurseurs organometalliques (o. M. C. V. D. ). La premiere approche de ce probleme a consiste en la formation de cette ceramique a partir de la co-decomposition de deux composes organometalliques, l'un precurseur de carbonitrure titane, cpticl#2n(sime#3)#2 (cp = c#5h#5, me = ch#3) ; l'autre precurseur de carbure de vanadium, cp#2vme#2 (cp = c#5h#5, me = ch#3). La seconde approche a ete basee sur la synthese d'un p
APA, Harvard, Vancouver, ISO, and other styles
4

Shyr, Shinn-Ching, and 石信卿. "The Study of Magnetic Properties of Fe-C-X(X=Sb,Ti,V) Thin Films." Thesis, 1994. http://ndltd.ncl.edu.tw/handle/78625021643501720102.

Full text
Abstract:
碩士<br>國立成功大學<br>材料科學(工程)研究所<br>82<br>A planar magnetron sputtering system with cathode and anode cooled by water was established.Under 1700V and 50 mtorr argon working pressure ,high carbon contented Fe-C (C:50.1-75.5at%) and Fe-C-X(X=Sb,Ti,V)(C:54.3-79.5 at%, Fe:8.4-43.5at%, Sb:5.8-37.3at%,Ti:2.0-4.6at%,V:0.2-3.5 at%) ternary alloy films are produced.All films have island-like surface morphology under the observation of STM.As carbon content increases ,the structure changes from .alpha. ir
APA, Harvard, Vancouver, ISO, and other styles
5

D, e. b. b. i. o. F. l. o. r. a. d. e. l. "P a e s a g g i a g r i c o l i r i t r o v a ti I Vivere insieme lo spazio urbano a partire dal cibo | Il caso di Lisbona." Master's thesis, 2020. http://hdl.handle.net/11144/4774.

Full text
Abstract:
A maneira como as cidades se abastecem e as preocupações ambientais relativas ao sistema alimentar do qual atualmente dependemos têm vindo a suscitar um particular interesse no âmbito da investigação no campo da arquitetura. Tomando como ponto de partida as questões alimentares e as relações que estas estabelecem com o espaço urbano, torna-se então possível repensar as cidades contemporâneas e recuperar o antigo vínculo - que se tem vindo a perder desde o advento da revolução industrial - entre o mundo urbano e o mundo agrícola. As particulares condições naturais da área de Lisboa favo
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Ti-C-V"

1

Umarov, L. M. Opticheskie spektry prot͡sessov SVS v sistemakh Ti-Si i Ti-C. OIKhF AN SSSR, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

C-Ta-W to Ti-V-W. Springer, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Effenberg, Günter. C-Ta-W to Ti-V-W. Springer, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Phi, Tôn. Chiếc đồng Hồ Của Dượng: Một Tiểu Thuyết Của Nhà Văn Tôn Phi. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Phi, Tôn, and Nguyễn Tự Quyết Thắng. Phương Pháp Học Ngoại Ngữ: Tổng Quan Về Học Một Tiếng Không Phải Tiếng Mẹ đẻ. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Learn Numbers in Vietnamese with Mai: Học Số Bằng Tiếng Việt Với Mai. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Learn the Vietnamese Alphabet with Mai: Học Bảng Chữ Cái Tiếng Việt Với Mai. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hoang-Long, Le. L?i Nhìn M?i V?n Ph?m Vi?t: Phân Tích V?n Ph?m T? M? d? Hi?u Và d? Th?c Hành Phát Âm Trình B?y Chi Ti?t. Authors' Tranquility Press, 2023.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Hoang-Long, Le. L?i Nhìn M?i V?n Ph?m Vi?t: Phân Tích V?n Ph?m T? M? d? Hi?u Và d? Th?c Hành Phát Âm Trình B?y Chi Ti?t. Authors' Tranquility Press, 2023.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Phi, Ton. Mái Trường yêu Dấu: Một Tiểu Thuyết Của Nhà Văn Tôn Phi. Independently Published, 2022.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Ti-C-V"

1

Lee, Sang Hwan, Kyung Sub Lee, and Kyung Jong Lee. "Evaluation of Wagner Interaction Parameter in Fe-Mn-Si-Nb-Ti-V-C System." In Materials Science Forum. Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-960-1.3327.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Zheng, Li Yun, Li Xin Zhao, and Jing Jun Zhang. "Friction and Wear Behavior of TiN/TiAlN Coated Ti(C,N)-Based Cermets." In High-Performance Ceramics V. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.1307.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zheng, Yong, Hai Jun Yu, Quan Yuan, and Yong Lin Yan. "Fabrication of Superfine Ti(C,N)-Based Cermet by Mechanical Alloying and Subsequent Liquid Sintering." In High-Performance Ceramics V. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.1107.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Jian Jiang, Wen Bin Hu, Hong Wei Liu, and Xin Kang Du. "Flying Combustion Experiments and Numerical Simulation for Ti-B4C-C Agglomerated Particles during the Self-Reactive Spray Forming Process." In High-Performance Ceramics V. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.1686.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Zhou, Yong Hui, Xing Ai, Jun Zhao, Xun Liang Yuan, and Qiang Xue. "Mechanical Properties and Microstructure of Al2O3/(W, Ti)C Nanocomposite." In High-Performance Ceramics V. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.717.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kalogirou, O., C. Sarafidis, T. Bakas, and M. Gjoka. "57Fe Mössbauer study of novel series of intermetallic compounds R3(Fe1−xCox)29−yTy (R=Nd, Tb, Dy; T=Ti, V)." In Hyperfine Interactions (C). Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-010-0281-3_38.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Li, Cui Wei, Hong Xiang Zhai, Yang Zhou, Shi Bo Li, and Zhi Li Zhang. "Synthesis of Ti3Si0.4Al0.8C1.8 Solid Solution." In High-Performance Ceramics V. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.995.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Xu, Xue Wen, Yang Xian Li, Jiao Qun Zhu, and Bing Chu Mei. "Synthesis, Structure and Properties of Ti3(SixAl1-x)C2 Solid Solutions." In High-Performance Ceramics V. Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/0-87849-473-1.992.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sonoda, Tsutomu, Akira Watazu, Kiyotaka Katou, Takahiko Yamada, and Tadashi Asahina. "Surface Modification of Aluminum Alloy with Ti/C Compositionally Gradient Film by Magnetron Co-sputtering." In Surface Modification Technologies XVIII: Proceedings of the Eighteenth International Conference on Surface Modification Technologies Held in Dijon, France November 15-17, 2004: v. 18, 18th ed. CRC Press, 2023. http://dx.doi.org/10.1201/9781003423874-69.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Characterization of Hydrogen Induced Cracking in Ferritic Fe-C-Ti and Fe-C-V Alloys." In International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments. ASME Press, 2017. http://dx.doi.org/10.1115/1.861387_ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Ti-C-V"

1

Bell, G. E. C., and P. S. Bishop. "Compatibility of Vanadium Alloys with Reactor-Grade Helium for Fusion Reactor Applications." In CORROSION 1993. NACE International, 1993. https://doi.org/10.5006/c1993-93177.

Full text
Abstract:
Tests were conducted to determine the compatiblity of vanadium alloys with reactor - grade helium and to define the helium gas chemistry requirements for fusion reactors. Miniature tensile specimens of V-5Cr-5Ti, V-10Cr-5Ti. and V-12.5Cr-5 Ti were exposed in a once-through system to helium with 70 vppm-H2 (measured oxygen partial pressures of 10-12 atm) and bottle helium (measured oxygen partial pressures of 10-4 atm) between 500 and 700°C for up to 1008 h. The weight changes in the specimens were recorded. The helium-exposed specimens were tensile tested, and the effects of exposure on mechan
APA, Harvard, Vancouver, ISO, and other styles
2

Okada, H., M. Igarashi, M. Yoshizawa, S. Matsumoto, T. Nakashima, and A. Iseda. "Long-Term Creep Properties of 2.25Cr-1.6W-VNbB Steel (T23/P23) for Fossil Fired and Heat Recovery Boilers." In AM-EPRI 2010, edited by D. Gandy, J. Shingledecker, and R. Viswanathan. ASM International, 2010. http://dx.doi.org/10.31399/asm.cp.am-epri-2010p0153.

Full text
Abstract:
Abstract The creep enhanced low alloy steel with 2.25Cr-1.6W-V-Nb (HCM2S; Gr.23, ASME CC2199) has been originally developed by Mitsubishi Heavy Industries, Ltd. and Sumitomo Metal Industries, Ltd. The steel tubes and pipe (T23/P23) are now widely used for fossil fired power plants all over the world. Recently, the chemical composition requirements for ASME Code of the steel have been changed and a new Code Case 2199-4 has been issued with the additional restriction regarding Ti, B, N and Ni, and the Ti/N ratio incorporated. In this study, the effects of additional elements of Ti, N and B on th
APA, Harvard, Vancouver, ISO, and other styles
3

John, R. C., P. Spencer, A. D. Pelton, et al. "Predictions of Corrosion Products for Alloys Corroding in Complex Gases via Thermochemical Analyses." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03501.

Full text
Abstract:
Abstract The capability to perform very user-friendly, thermochemical analyses of complex, real alloys corroding in complex, high-temperature gases has been developed. Predictions of the stabilities of complex assemblies of corrosion products formed by reactions of alloys containing Fe-Cr-Ni-Co-C-N and gases containing S-C-O-H-N species can now be done with unprecedented accuracy and generality. The thermochemical data models are based upon extensive analyses of all available thermochemical data for all possible solid and liquid compounds and solutions based upon all combinations of Fe-Cr-Ni-C
APA, Harvard, Vancouver, ISO, and other styles
4

John, R. C., A. D. Pelton, P. Spencer, A. L. Young, and W. T. Thompson. "Alloy Carburization at Temperatures of 1,200 - 2,100°F (650 - L,150°C)." In CORROSION 2003. NACE International, 2003. https://doi.org/10.5006/c2003-03474.

Full text
Abstract:
Abstract A large body of knowledge on the carburization of engineering alloys used in high-temperature petrochemical processing equipment is being developed. The capability includes: the facility to perform thermochemical assessments of carbide formation on complex alloys in diverse conditions and the capability to predict carburization for various exposure conditions. The alloys considered are widely used, commercial and based upon mixtures of Fe-Cr-Ni-Co. The gaseous exposure conditions considered contain CH4-H2-H2S-H2O. The thermochemical data models have been prepared to predict phase form
APA, Harvard, Vancouver, ISO, and other styles
5

Kathayat, T. S., Richard T. Hill, Rajesh K. Goyal, and J. Raghu Shant. "Development of Sour Service Offshore High Strength and Heavy Wall Line Pipe by Double Submerged Arc Welded (DSAW) Process." In CORROSION 2013. NACE International, 2013. https://doi.org/10.5006/c2013-02580.

Full text
Abstract:
Abstract The presence of severe corrosive environment along with higher external pressure in the Black sea has led to develop high strength heavy wall offshore sour service linepipe. The paper will cover the successful development of high strength API 5L X70 Sour Service, Fracture arrest properties, Dimensions, High Utilization (SFDU) (33 inch OD x 39.5 mm WT) linepipe manufactured by the J-C-O-E technology. Pipe rolling and welding parameters were controlled to minimize the circumferential residual stress and weld and Heat Affected Zone (HAZ) hardness in order to enhance the Hydrogen Induced
APA, Harvard, Vancouver, ISO, and other styles
6

Ro, Kwang-Seop. "Improvement on the Sulfide Stress Corrosion Cracking Properties of Hot Rolled Line-Pipe Steels." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00382.

Full text
Abstract:
Abstract The purpose of the present study was to develop the optimum processing condition to improve sulfide stress corrosion cracking (SSCC) resistance for line pipe steels. The effects of alloying, slab reheating temperature, water cooling pattern and coiling temperature on microstructure, hydrogen induced cracking (HIC) and SSCC sensitivities, and mechanical properties were analyzed. The mechanism of SSCC was studied by a dead weight tensile test as well as a constant elongation rate test method. The maximum contents of Mn and P showed the best relationship with the HIC sensitivity, and the
APA, Harvard, Vancouver, ISO, and other styles
7

Kimoto, Yuta, Hirotoyo Nakashima та Masao Takeyama. "Effect of Carbon in Solution on Phase Equilibria among β/α(α2)/γ Phases in TiAl Alloys Using Soft X-Ray Emission Spectroscopy". У AM-EPRI 2019, редактори J. Shingledecker та M. Takeyama. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.am-epri-2019p1402.

Full text
Abstract:
Abstract Interstitial carbon (C) in β-Ti, α-Ti, α2-Ti3Al and γ-TiAl phases present in the γ-TiAl alloys with and without substitutional elements (M: transition element) is quantitatively analyzed using soft X-ray emission spectroscopy (SXES), in order to reveal the effect of solute carbon on the phase equilibria. SXES for carbon analysis was used and the peak intensity of the second reflection of carbon Kα is analyzed using the fully homogenized sample having different C content under the optimum condition to make the accurate calibration curves. The obtained calibration curve is in an accurac
APA, Harvard, Vancouver, ISO, and other styles
8

Jullian, Domingo, Shigenari Hayashi та Masao Takeyama. "Competitive Effect of Nb and V on High-Temperature Oxidation of α2-Ti-30Al Alloys". У AM-EPRI 2019, редактори J. Shingledecker та M. Takeyama. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.am-epri-2019p0971.

Full text
Abstract:
Abstract The competitive effect of Nb and V additions on the high-temperature oxidation behavior of Ti- 30Al alloys were studied at 800°C in air. Oxidation performance increased with increasing Nb content, however, V additions eliminated the beneficial effect of Nb on oxidation performance, causing higher oxidation mass gains. In-situ high-temperature XRD by means of synchrotron source suggested dissolution of Nb5+ but lower valence of vanadium ions in the TiO2 oxide scale during oxidation. Dissolution of Nb and V ions with different valence in TiO2 during oxidation could cause the beneficial
APA, Harvard, Vancouver, ISO, and other styles
9

Yu, Chi, Feng Yang, and Jinping Suo. "The Effect of Ti, N and V Content and Heat Treatment on Irradiation and Mechanical Property of SCRAM Steels." In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-30625.

Full text
Abstract:
An Fe-Cr-W-V-Ti-N steel named SCRAM (super-clean reduced-activation martensitic) steel was designed for the first wall and blanket structure of fusion power plants. Compared with the Fe-Cr-W-V-Ta steel, TiN can precipitate first at 1650°C rather than TaC by the Thermal-cal Calculation. And we take vacuum induction melting (VIM) and electro-slag re-melting (ESR) together to manufacture the SCRAM steel, which can make the TiN fine and the steel pure. Mechanical properties and microstructures of SCRAM steels irradiated with single-beam (Fe) and sequential-beam (Fe plus He and Fe plus H) at 300°C
APA, Harvard, Vancouver, ISO, and other styles
10

Zeng, Zhensu, Yukinobu Makino, Sayaka Sako, Hidenori Era, Ken Muraoka, and Seiji Kuroda. "Development of Super Stainless Steel Coating with Improved Corrosion Resistance and Enhanced Hardness Focusing on Characteristics of Atmosphere Plasma Spray Process." In ITSC2019, edited by F. Azarmi, K. Balani, H. Koivuluoto, et al. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.itsc2019p0867.

Full text
Abstract:
Abstract This study assesses the effect of different alloying elements on the microstructure, oxygen content, hardness, and corrosion resistance of stainless steel coatings produced by atmospheric plasma spraying. SUS836L stainless steel powder with Si, Mn, and B additions served as the base feedstock alloy to which different amounts of B, C, Mo, Ti, Nb, V, and Cu were added. The powder mixtures were sprayed on carbon steel substrates and the deposits were examined and tested. The results show that B and C additions of 2-3% have a beneficial effect, but at 5% cause a drop in corrosion resistan
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Ti-C-V"

1

Loomis, B. A., L. J. Nowicki, and D. L. Smith. Hardness recovery of 85% cold-worked V-Ti and V-Cr-Ti alloys upon annealing at 180{degrees}C to 1200{degrees}C. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/115707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Sunwoo, A. Characterization of Ti-6%Al-4%V and VascoMax C-350. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/15015902.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Natesan, K., and M. Uz. Oxidation kinetics and microstructure of V-(4-5) Wt.%Cr-(4-5) Wt.%Ti alloys exposed to air at 300-650{degrees}C. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/415830.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zinkle, S. J., D. J. Alexander, and J. P. Robertson. Effect on fast neutron irradiation to 4 dpa at 400{degrees}C on the properties of V-(4-5)Cr-(4-5)Ti alloys. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/543277.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Godet, A., M. Smit, C. Guilmette, and F. Fournier-Roy. La longue vie du Batholite de Decelles, Pontiac, Québec: les grenats à notre rescousse! Natural Resources Canada/CMSS/Information Management, 2024. http://dx.doi.org/10.4095/332509.

Full text
Abstract:
Les granites peralumineux sont reconnus à l'échelle mondiale comme le produit magmatique final des cratons archéens. Cependant, leur durée, les conditions thermiques de leur mise en place, leur séquence de cristallisation, ainsi que les liens avec l'évolution tectonométamorphique des roches encaissantes et les systèmes minéralisés en métaux précieux, de base, et rares sont peu connus. Le Batholite de Decelles (c. 2670-2620 Ma) exposé dans le sud-est du craton du Supérieur au Québec, Canada est l'un des plus volumineux de la région, offrant une opportunité unique dmp;gt;'améliorer notre compréh
APA, Harvard, Vancouver, ISO, and other styles
6

Ruangpornvisuti, Vithaya. Surfaces properties of Zirconia and its adsorption of gases : Research report. Chulalongkorn University, 2015. https://doi.org/10.58837/chula.res.2015.36.

Full text
Abstract:
The adsorption of CO and NH₃ gases on the cubic ZrO2 (110) surface was investigated by two–dimensionally periodic slab model DFT method. The relative adsorption energies of these gases on the cubic ZrO₂ (110) surface is in order: NH₃ &gt; CO. The adsorption energies of NH3 on the cubic ZrO₂ (110) surface are –27.62 and –25.51 kcal/mol, obtained using the PBE0 and B3LYP methods, respectively. The CO adsorption on the cubic ZrO2 (110) surface –11.39 and –9.81 kcal/mol, obtained using the PBE0 with rigid and flexible models, respectively. The geometry optimizations of zirconia nanoparticle (ZrO₂–
APA, Harvard, Vancouver, ISO, and other styles
7

Groeneveld. L51690 Evaluation of Modern X-70 HFER Line Pipe. Pipeline Research Council International, Inc. (PRCI), 1992. http://dx.doi.org/10.55274/r0010316.

Full text
Abstract:
In recent years, several pipe mills have produced heavy-wall, large diameter pipe from plates of microalloyed steels that were controlled-rolled to develop properties to meet the API 5LX Grade 70 or Grade 80 requirements and that were electric resistance welded (ERW) using advanced techniques. The use of advanced electric seam-welding practices on the steels produced using advanced steel making and processing methods offers the possibility of obtaining high strength line pipe at a lower cost than pipes produced from similar steels but with double submerged arc seam welds. The present study was
APA, Harvard, Vancouver, ISO, and other styles
8

T., Hills, and Pramova E. Cung câp thong tin cho viec ra quyê´t dinh vê` cac tiêp can du a tren he sinh thai phuc vu viec thich ung cua nguoi dan khu vuc Chau A´ – Tha´i Binh Duong. Center for International Forestry Research (CIFOR), 2011. http://dx.doi.org/10.17528/cifor/003695.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Ti-C-V' for particular source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography