Relevant bibliographies by topics / Ti6Al4V alloy

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Ti6Al4V alloy'

Author: Grafiati
Published: 4 June 2021
Last updated: 27 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Ti6Al4V alloy.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Ti6Al4V alloy"

1

Zhan, Zhongwei, Qi Zhang, Shuaixing Wang, et al. "Comparison on the Electrochemical Corrosion Behavior of Ti6Al4V Alloys Fabricated by Laser Powder Bed Fusion and Casting." Materials 17, no. 13 (2024): 3322. http://dx.doi.org/10.3390/ma17133322.

Full text
Abstract:
The non-equilibrium solidification process in the additive manufacturing of titanium alloy leads to special microstructures, and the resulting changes in corrosion behavior are worthy of attention. In this paper, the microstructure and electrochemical corrosion behavior of Ti6Al4V alloys prepared using laser powder bed melting (LPBF) and casting are systematically compared. The results show that the LPBF-processed Ti6Al4V alloy is composed of dominant acicular α′ martensite within columnar prior β phase, and less β disperses have also been discovered, which is significantly different from the
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Qiang, Pu Song, Wenjuan Niu, Nan Li, and Ning Hu. "High Temperature Oxidation Behavior of Additive Manufactured Ti6Al4V Alloy with the Addition of Yttrium Oxide Nanoparticles." Materials 17, no. 11 (2024): 2544. http://dx.doi.org/10.3390/ma17112544.

Full text
Abstract:
Titanium alloys face challenges of high temperature oxidation during the service period when used as aircraft engine components. In this paper, the effect of Y2O3 addition on the oxidation behavior and the microstructural change of the Ti6Al4V alloy fabricated by selective laser melting (SLM) was comprehensively studied. The results show that the surface of the Ti6Al4V alloy is a dense oxide layer composed of TiO2 and Al2O3 compounds. The thickness of the oxide layer of the Ti6Al4V increased from 59.55 μm to 139.15 μm. In contrast, with the addition of Y2O3, the thickness of the oxide layer in
APA, Harvard, Vancouver, ISO, and other styles
3

Loto, Roland Tolulope. "Corrosion polarization and passivation behavior of selected stainless steel alloys and Ti6Al4V titanium in elevated temperature acid-chloride electrolytes." Open Engineering 12, no. 1 (2022): 511–23. http://dx.doi.org/10.1515/eng-2022-0052.

Full text
Abstract:
Abstract The corrosion polarization behavior of 439ll ferritic (439ll), 316L austenitic (316L), and NO7208 nickel-chromium-aluminum-iron (NO7208) stainless steels, and Ti6Al4V titanium (Ti6Al4V) alloys was studied in 4 M H2SO4 + 5% NaCl solution at 35 and 70°C. Corrosion rate (C R) of the alloys were generally higher at 70°C. NO7208 and 439ll alloy exhibited higher resistance to general corrosion at 35°C (0.067 and 0.050 mm/year) while Ti6Al4V was the most reactive (0.506 mm/year). Passivation behavior was evident on the plots of NO7208 and Ti6Al4V alloys. NO7208 pitted at 1.04 V with passivat
APA, Harvard, Vancouver, ISO, and other styles
4

Fan, Ai Lan, Cheng Gang Zhi, Lin Hai Tian, Lin Qin, and Bin Tang. "Corrosion Behaviours of Mo Modified Ti6Al4V Alloy in Hank’s Solution." Materials Science Forum 610-613 (January 2009): 1150–54. http://dx.doi.org/10.4028/www.scientific.net/msf.610-613.1150.

Full text
Abstract:
The Mo surface modified layer on Ti6Al4V alloy was obtained by the plasma surface alloying technique. The structure and composition of the Mo modified Ti6Al4V alloy was investigated by X-ray diffraction (XRD) and glow discharge optical emission spectroscopy (GDOES). The Mo modified layer contains Mo coating on subsurface and diffusion layers between the subsurface and substrate. The X- ray diffraction analysis of the Mo modified Ti6Al4V alloy reveals that the outmost surface of the Mo modified Ti6Al4V alloy is composed of pure Mo. The electrochemical corrosion performance of the Mo modified Ti
APA, Harvard, Vancouver, ISO, and other styles
5

Peng, Hanlin, Weiping Fang, Chunlin Dong, et al. "Nano-Mechanical Properties and Creep Behavior of Ti6Al4V Fabricated by Powder Bed Fusion Electron Beam Additive Manufacturing." Materials 14, no. 11 (2021): 3004. http://dx.doi.org/10.3390/ma14113004.

Full text
Abstract:
Effects of scanning strategy during powder bed fusion electron beam additive manufacturing (PBF-EB AM) on microstructure, nano-mechanical properties, and creep behavior of Ti6Al4V alloys were compared. Results show that PBF-EB AM Ti6Al4V alloy with linear scanning without rotation strategy was composed of 96.9% α-Ti and 2.7% β-Ti, and has a nanoindentation range of 4.11–6.31 GPa with the strain rate ranging from 0.001 to 1 s−1, and possesses a strain-rate sensitivity exponent of 0.053 ± 0.014. While PBF-EB AM Ti6Al4V alloy with linear and 90° rotate scanning strategy was composed of 98.1% α-Ti
APA, Harvard, Vancouver, ISO, and other styles
6

Dolinar, Drago, Miro Gorenšek, Klemen Avsec, et al. "Mechanisms of Premature Fracture in Modular Neck Stems Made of CoCrMo/Ti6Al4V and Ti6Al4V/Ti6Al4V Alloy." Coatings 13, no. 7 (2023): 1255. http://dx.doi.org/10.3390/coatings13071255.

Full text
Abstract:
In this paper, we present the mechanisms of premature fracture of modular neck stems in two case studies: (I) when the neck and stem are both made of the same Ti6Al4V alloy, and (II) when the neck and stem are made from two different alloys, CoCrMo and Ti6Al4V alloy. Our study integrates two orthopedic patients who have undergone primary uncemented THA for usual indications in two orthopedic centers (Community Health Centre and University Medical Centre). Both centers are part of the national public health care system. Both surgeries were performed by two skilled orthopedic surgeons with more
APA, Harvard, Vancouver, ISO, and other styles
7

Zhao, Wei, Ning He, and Liang Li. "Effect Mechanism of Nitrogen Gas on Chip Formation in High Speed Cutting of Ti6Al4V Alloy Based on FEM Simulation." Materials Science Forum 626-627 (August 2009): 177–82. http://dx.doi.org/10.4028/www.scientific.net/msf.626-627.177.

Full text
Abstract:
Titanium alloys are known for their strong chemical reactivity with surrounding gas due to their high chemical affinity, especially in dry machining. This paper describes a study of chip formation characteristics under nitrogen gas media when machining Ti6Al4V alloy with WC-Co cemented carbide cutting tools at high cutting speeds. Based on the experimental study, a finite element model of two-dimensional orthogonal cutting process for Ti6Al4V alloy at different cutting conditions was developed using a commercial finite element software Deform-2D. Saw-tooth chips with adiabatic shear bands were
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Xingyu, Weimin Wu, Xiangxiang Zhang, and Yanhu Wang. "Effect of Laser Quenching on Wire–Powder Collaborative Arc Additive Manufacturing of Ti6Al4V-Cu Alloys with 2.4% and 7.9% Copper Content." Materials 17, no. 24 (2024): 6176. https://doi.org/10.3390/ma17246176.

Full text
Abstract:
In this work, Ti6Al4V-Cu alloys with different Cu contents (2.4 and 7.9 wt.%) were fabricated using novel wire–powder synchronous arc additive manufacturing to analyze the effect of laser quenching on Ti6Al4V-Cu alloys. The results show that this method can successfully produce Ti6Al4V-Cu alloys with a uniform composition. As the copper content increased, the alloy transitioned from a Widmanstätten structure to a basketweave structure, and the yield strength and tensile strength of the alloy increased by approximately 35% due to grain refinement and the high volume fraction of Ti2Cu with eutec
APA, Harvard, Vancouver, ISO, and other styles
9

Yu, Peng-Cheng, Xiu-Bo Liu, Xiao-Long Lu, et al. "Tribology and high-temperature oxidation behaviors of NiCrBSiFe composite coatings on Ti6Al4V alloy by laser cladding." RSC Advances 5, no. 93 (2015): 76516–25. http://dx.doi.org/10.1039/c5ra14732h.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Li, Fu Ping, Jin Shan Li, Ge Jun Liu, Hong Chao Kou, Guang Sheng Xu, and Lian Zhou. "Fabrication and Compressive Properties of Porous Ti6Al4V Alloy with Elongated Pores for Biomedical Application." Materials Science Forum 815 (March 2015): 354–58. http://dx.doi.org/10.4028/www.scientific.net/msf.815.354.

Full text
Abstract:
Porous Ti6Al4V alloys with anisotropic structure for biomedical application was fabricated by diffusion bonding of titanium alloy meshes. Compressive mechanical compatibility of the alloys is investigated as human bone implants. It is concluded that the fabrication processing for porous Ti6Al4V alloys has better control of the porosity. The pore structure of porous titanium is anisotropic, with elongated and square pores in the out-of-plane and in-plane direction, respectively, which is suited for bone ingrowth. The compressive Young’s modulus and yield stress of porous Ti6Al4V alloy compresse
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Ti6Al4V alloy"

1

Karimzadeh, F., P. Salehikahrizsangi, M. H. Enayati, and M. H. Abbasi. "Development and Characterization of Nanostructured Ti6Al4V Alloy." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34885.

Full text
Abstract:
Nanostructured Ti6Al4V alloy was successfully formed through mechanical alloying of a stoichiometric mixture of Ti, Al and V powders. Phase evolutions of the milled powders were investigated by XRD. The Ti(Al,V) solid solution formed after 10 h milling. Prolongation of the milling process up to 20 h lead to a structure consisting of the B-Ti phase in the a-Ti(Al) matrix. The nanostructured Ti6Al4V alloy had a grain size and hardness of 20 nm and 600 Hv respectively. Thermal stability of the alloyed powder was good as it's hardness increased to 950 Hv after 5 hr heat treatment at 1100
APA, Harvard, Vancouver, ISO, and other styles
2

Mazwi, Sive. "Hydrogen storage in Ti-based coatings and Ti6Al4V alloy." University of the Western Cape, 2016. http://hdl.handle.net/11394/5319.

Full text
Abstract:
>Magister Scientiae - MSc<br>Hydrogen has been regarded as an ideal energy carrier for future, it can be stored as a liquid in cryogenic tanks, a gas in high pressure cylinders and as solid in metal hydrides. Hydrogen storage in metal hydrides is of research interest because hydrides often have high energy density than gas or liquid hydrogen and are relatively safe. Ti and Ti alloys are promising hydrogen storage material because they have high affinity for hydrogen, light in weight and react reversibly with hydrogen. This work aims to investigate the hydrogen storage capacity of CP- Ti and Ti
APA, Harvard, Vancouver, ISO, and other styles
3

Yan, Xingchen. "Study on Selective Laser Melting of Ti-6Al-4V alloy for biomedical applications." Thesis, Bourgogne Franche-Comté, 2018. http://www.theses.fr/2018UBFCA032.

Full text
Abstract:
La fusion sélective par laser (SLM), en tant que technologie de fabrication additive émergente, permet la fabrication de pièces complexes et de conception avancée. Cette technologie est particulièrement adaptée aux applications biomédicales, telles que la production d'implants personnalisés. Les alliages de titane, en particulier le Ti6Al4V, sont largement utilisés dans les industries médicales en raison de leurs excellentes propriétés mécaniques et de leur biocompatibilité. Afin de développer une substitution osseuse spécifique, l'étude présente s'est concentré sur les propriétés mécaniques,
APA, Harvard, Vancouver, ISO, and other styles
4

Mastrocinque, Ernesto. "Laser welding of Ti6Al4V alloy by disk laser: analysis and optimization." Doctoral thesis, Universita degli studi di Salerno, 2012. http://hdl.handle.net/10556/352.

Full text
Abstract:
2010 - 2011<br>Titanium alloys have been successfully applied in many industrial fields because of their better performance and lighter weight than other commonly used structural materials. The conventional welding methods used for titanium alloys are tungsten inert gas (TIG) and plasma arc welding. In recent decades, autogenous processes with highly concentrated energy sources have become popular; these joining processes are laser and electron-beam welding. The power source can be concentrated in very small areas so as to achieve energy densities up to 10,000 times higher than those of
APA, Harvard, Vancouver, ISO, and other styles
5

Modgil, Aditya. "Effects of high speed machining on surface topography of titanium alloy (Ti6Al4V)." [Gainesville, Fla.] : University of Florida, 2003. http://purl.fcla.edu/fcla/etd/UFE0002846.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

PERETTI, VERONICA. "Boronizing of Ti6Al4V alloy as a biomaterial with enhanced surface mechanical properties." Doctoral thesis, Politecnico di Torino, 2019. http://hdl.handle.net/11583/2730235.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Bordin, Alberto. "Machinability of Ti6Al4V alloy produced by electron beam melting under different lubricating conditions." Doctoral thesis, Università degli studi di Padova, 2016. http://hdl.handle.net/11577/3427109.

Full text
Abstract:
In the last decade, the growing diffusion of metal additive manufacturing technologies is revolutionising the manufacturing processes of the most advanced industrial fields. Nowadays, more and more companies operating in the aeronautic and in the biomedical field are employing the additive manufacturing technology of Electron Beam Melting (EBM) to produce prosthesis and aero engine parts made of the titanium alloy Ti6Al4V, traditionally produced by hot forging and machining. Thanks to this technology, it is possible to realise a complex shape component with tailored mechanical and geometrical
APA, Harvard, Vancouver, ISO, and other styles
8

Eriksen, Lars. "Combined EBSD-Investigations and In-situ Tensile Tests of a Direct Metal Deposited Ti6Al4V-Alloy." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for materialteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-22438.

Full text
Abstract:
Two blocks made of Ti6Al4V material produced by Norsk Titanium Components ned Direct Metal Deposition (DMD) production technology were delivered for this investigation. The main difference between the blocks was the different waiting time implemented in the production parameters. The different waiting time implied that the material were allowed to cool to a deisred Interpass Temperature (IT). The blocks are referred to as T200 and T600 after their lowest IT of &lt;200 degrees celsius and 500-700 degrees celsius, respectively. Sintef Manufacturing Raufoss reported elongations of 5% and 8% in th
APA, Harvard, Vancouver, ISO, and other styles
9

Antonysamy, Alphons Anandaraj. "Microstructure, texture and mechanical property evolution during additive manufacturing of Ti6Al4V alloy for aerospace applications." Thesis, University of Manchester, 2012. https://www.research.manchester.ac.uk/portal/en/theses/microstructure-texture-and-mechanical-property-evolution-during-additive-manufacturing-of-ti6al4v-alloy-for-aerospace-applications(03c4d403-822a-4bfd-a0f8-ef49eb65e7a0).html.

Full text
Abstract:
Additive Manufacturing (AM) is an innovative manufacturing process which offers near-net shape fabrication of complex components, directly from CAD models, without dies or substantial machining, resulting in a reduction in lead-time, waste, and cost. For example, the buy-to-fly ratio for a titanium component machined from forged billet is typically 10-20:1 compared to 5-7:1 when manufactured by AM. However, the production rates for most AM processes are relatively slow and AM is consequently largely of interest to the aerospace, automotive and biomedical industries. In addition, the solidifica
APA, Harvard, Vancouver, ISO, and other styles
10

Gregui, Ricardo Gratão. "Tenacidade à fratura dinâmica de ligas de titânio (Ti6AI4V) e de aço inoxidável (PH15-5)." Universidade de São Paulo, 2005. http://www.teses.usp.br/teses/disponiveis/18/18135/tde-17022016-122311/.

Full text
Abstract:
O presente trabalho visou determinar a tenacidade à fratura dinâmica, KID, primeiramente pelos conceitos da Mecânica da Fratura Elástica Linear (MFEL) e posteriormente pela Mecânica da Fratura Elasto-Plástica (MFEP), JID, em materiais que em operação podem estar sujeitos a impactos em diferentes temperaturas. Os materiais estudados, de uso na indústria aeronáutica, foram uma liga de titânio Ti6Al4V (norma SAE AMS 4911), na condição recozida e uma liga de aço inoxidável PH 15-5 (norma SAE AMS 5659), na condição H1000. Os corpos de prova pré-trincados e entalhados foram retirados nas orientações
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Ti6Al4V alloy"

1

Dong, Hanshan. Development of novel surface engineering technologies for Ti6A14V alloy. University of Birmingham, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Hailu, Habte-Mariam Wekianos. Electron beam surface alloying of Titanium alloy Ti6A14V towards improved tribological properties. University of Birmingham, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Ti6Al4V alloy"

1

Qu, Xuan Hui, Shi Bo Guo, Chun Feng Tang, Ming Li Qin, Xin Bo He, and Syed Humail Islam. "Powder Injection Molding of Ti6Al4V Alloy." In THERMEC 2006. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.2639.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Siyahjani, Farid, and Erdem Atar. "Nitriding Behavior of Ti6Al4V Alloy in Gas Atmosphere." In TMS 2014 Supplemental Proceedings. John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118889879.ch26.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ruggiero, Alessandro, Roberto D’Amato, Nicolae Ungureanu, and Saverio Affatato. "Friction Comparison on Tribological Pairs HXLPE/Ti6Al4V Alloy and VE-HXLPE/Ti6Al4V Alloy Under Dry and Physiological Lubricated Conditions." In Advances in Manufacturing Engineering and Materials II. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-71956-2_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Doloi, Sayan, Amlana Panda, and Ashok Kumar Sahoo. "Experimental Investigation into Ultrasonic Machining of Titanium Alloy Ti6Al4V." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-7150-1_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Cingi, Mehmet, Onur Meydanoglu, Hasan Guleryuz, Murat Baydogan, Huseyin Cimenoglu, and S. Kayali. "High Cycle Fatigue Behavior of Thermally Oxidized Ti6Al4V Alloy." In Materials Science Forum. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.2179.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sahu, A. K., H. A. Patel, J. Malhotra, and S. Jha. "Experimental Study of Nanosecond Fiber Laser Micromilling of Ti6Al4V Alloy." In Lecture Notes on Multidisciplinary Industrial Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9425-7_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chowdhury, Sohini, Yadaiah Nirsanametla, and Manapuram Muralidhar. "Investigation on Metallographic Analysis of Electron Beam Ti6Al4V Alloy Welds." In Lecture Notes on Multidisciplinary Industrial Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9072-3_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zhao, W., Ning He, and Liang Li. "High Speed Milling of Ti6Al4V Alloy with Minimal Quantity Lubrication." In Advances in Abrasive Technology IX. Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-416-2.663.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dareh Baghi, Alireza, Shahrooz Nafisi, Reza Hashemi, Heike Ebendorff-Heidepriem, and Reza Ghomashchi. "Machining Versus Heat Treatment in Additive Manufacturing of Ti6Al4V Alloy." In The Minerals, Metals & Materials Series. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92381-5_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Narayanan, T. S. N. Sankara, and Hyung Wook Park. "Laser Powder Bed Fusion of Ti6Al4V Alloy for Biomedical Applications." In Materials Development and Processing for Biomedical Applications. CRC Press, 2022. http://dx.doi.org/10.1201/9781003173533-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Ti6Al4V alloy"

1

Hansen, Douglas C. "The Effect of a Novel Biopolymer on the Corrosion of 316L Stainless Steel and Ti6Al4v Alloys in a Physiologically Relevant Electrolyte." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07677.

Full text
Abstract:
Abstract The corrosion behavior of 316L and Ti6Al4V when immersed in 0.9% NaCl, Hanks Balanced Salt Solution (HBSS) and HBSS modified with the addition of albumin and fibrinogen at concentrations similar to that found in blood serum was investigated for the alloys alone and in a galvanic couple configuration. The results of this investigation indicate that the presence of serum proteins in the Hanks Balanced Salt Solution increased the corrosion rate of 316L alloy by an order of magnitude, but decreased the corrosion rate of the Ti6Al4V alloy. However, when the alloys were configured in a galv
APA, Harvard, Vancouver, ISO, and other styles
2

Daniyan, Ilesanmi, Sesan Peter Ayodeji, Augustine Lawal, and Siviwe Mrausi. "Drilling of Titanium Alloy (Ti6Al4V) using Response Surface Methodology: An Experimental Approach." In 2024 International Conference on Science, Engineering and Business for Driving Sustainable Development Goals (SEB4SDG). IEEE, 2024. http://dx.doi.org/10.1109/seb4sdg60871.2024.10630144.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kovalov, Danyil, Gifty Oppong Boakye, Erlend Straume, Sandeep Irukuvarghula, Raja Khan, and Sigrun Nanna Karlsdottir. "Comparative Study of Corrosion Resistance of Hot Isostatically Pressed Ti6Al4v+10Vol%TiB2 Titanium Matrix Composite vs. Wrought Ti6Al4v (UNS Designation R56400) Alloy in Simulated High-Temperature Geothermal Environment." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16480.

Full text
Abstract:
ABSTRACT A key factor successfully leading to long-term operation of the equipment in the aggressive environment at geothermal power plants is the proper selection of materials with high erosion-corrosion-resistant properties. One group of materials called to improve the erosion, corrosion, and wear resistance of pumps, turbines, and heat exchangers operated in the geothermal industry, is the titanium (Ti) alloys. In this paper, we report the comparative analysis of corrosion resistance for a newly developed hot isostatically pressed Ti6Al4V reinforced with a 10vol%-titanium diboride titanium
APA, Harvard, Vancouver, ISO, and other styles
4

Matthes, Melissa, Michelle Hawkins, and Edward Daykin. "Hypervelocity Impact of TI6AL4V Alloy Materials." In 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016) held in Montreal, Canada, August 22-26, 2016. US DOE, 2016. http://dx.doi.org/10.2172/1755190.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lin, Xin, T. M. Yue, Haiou Yang, and Weidong Huang. "Laser rapid forming of graded TI6AL4V/RENE88DT alloy." In ICALEO® 2005: 24th International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2005. http://dx.doi.org/10.2351/1.5060510.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yan Li, Dongyan Ding, Shuo Bai, Ming Li, and Dali Mao. "Titania nanostructures fabricated through anodization of Ti6Al4V alloy." In 2008 International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP). IEEE, 2008. http://dx.doi.org/10.1109/icept.2008.4607049.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rizzuti, S., and D. Umbrello. "Finite Element Simulation of Machining of Ti6Al4V Alloy." In THE 14TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2011. AIP, 2011. http://dx.doi.org/10.1063/1.3589586.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ergun, Celalettin, Zafer Evis, and Robert H. Doremus. "Interface in Hydroxylapatite Coated Ti6Al4V Alloys." In ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2004. http://dx.doi.org/10.1115/esda2004-58177.

Full text
Abstract:
The aim of the present study is to develop a better understanding of the interface reaction between hydroxylapatite and Ti6Al4V alloys. Hydroxylapatite coatings on Ti6Al4V, Hydroxylapatite-metallic titanium powder, hydroxylapatite-titania composites were prepared via air sintering and/or hot isostatic pressing (HIP). The reaction between components was monitored with EPMA line scanning technique, XRD, and thermal analysis. EPMA analysis on the interface between the hydroxylapatite and Ti6Al4V alloy showed interdiffusion profiles of all the hydroxylapatite and alloy elements suggesting interfac
APA, Harvard, Vancouver, ISO, and other styles
9

Pang, W., H. C. Man, and T. M. Yue. "Laser Surface Coating of Metal Matrix Composite on Ti6Al4V Alloy." In ASME 2003 Heat Transfer Summer Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/ht2003-47221.

Full text
Abstract:
Laser surface coating of Mo, WC and Mo-WC powders on the surface of Ti6Al4V alloys using a 2kW Nd-YAG laser was performed. The dilution effect, microstructure, microhardness and wear resistance of the fabricated MMC coating were investigated. With a constant thickness of pre-placed powder, the dilution levels of the alloyed layers were found to be increased with the incident laser power. The fabricated MMC layer was metallurgically bonded to the Ti6Al4V substrate. The microhardness of the fabricated surface layer was found to be inversely proportional to the dilution level. The EDAX and XRD sp
APA, Harvard, Vancouver, ISO, and other styles
10

Akinlabi, Esther T., Yasuhiro Okamoto, Martin Ruthandi Maina, et al. "Laser Metal Deposition of Titanium Alloy (Ti6Al4V): A Review." In 2019 International Conference on Engineering, Science, and Industrial Applications (ICESI). IEEE, 2019. http://dx.doi.org/10.1109/icesi.2019.8863018.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Ti6Al4V alloy"

1

Bidhar, Sujit. Fatigue Performance of Proton Irradiated Ti6Al4V Alloy. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1606214.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kerley, Gerald Irwin. Equations of state for titanium and Ti6A14V alloy. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/918300.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Ti6Al4V alloy' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography