Journal articles on the topic 'Tie lu sui dao'

The main purposes of the present study are to evaluate pilot grouting and to develop regression equations for prediction of grout intake. There are no permeability problems with the sandstone-siltstone-claystone alternations and basement clayey limestone at the dam site. Karstic limestone block is permeable due to karstification and heavy discontinuities. For the purpose of the study, Q system, geological strength index (GSI), secondary permeability index (SPI), joint spacing (JSP), joint apertures (Ap), Lugeon (Lu), and the permeability coefficient (k) were determined. Karstic limestone block rock mass properties correlated with grouting material amount. A series of simple and multiple nonlinear regression analyses was performed between grout take material amount (Gt) and average values of these rock mass properties. Significant determination coefficients were determined. Prediction capacity of the empirical equations were also examined with root mean square error (RMSE), values account for (VAF), mean absolute percentage error (MAPE), and prediction error evaluations. Considering simple regression analyses, the equation derived with Gt-SPI gives the best performance. The best prediction is determined with the equation derived with rock quality designation values (RQD), SPI, and joint aperture as input parameters with the multiple nonlinear regression analysis, in addition to this, other empirical equations also provide acceptable results.

Traditional Chinese medicine (TCM) divides fracture treatment into three stages. Many TCM herbs and formulas have been used to treat fractures for thousands of years. However, research regarding the Chinese herbal products (CHPs) that should be used at different periods of treatment is still lacking. This study aims to identify the CHPs that should be used at different periods of treatment as well as confirm the TCM theory of fracture periods medicine. We used prescriptions of TCM outpatients with fracture diagnoses analyzed using the Chang Gung Research Database (CGRD) from 2000 to 2015. According to the number of days between the date of the fracture and the clinic visit date, all patients were assigned to one of three groups. Patients with a date gap of 0-13 days were assigned to the early period group; those with a date gap of 14-82 days were assigned to the middle period group; and those with a date gap of 83-182 days were assigned to the late period group. We observed the average number of herbal formulas prescribed by the TCM doctor at each visit was 2.78, and the average number of single herbs prescribed was 6.47. The top three prescriptions in the early fracture period were Zheng-gu-zi-jin-dang, Shu-jing-huo-xue-tang, and Wu-ling-san. In the middle fracture period, the top three formulas were Zheng-gu-zi-jin-dang, Shu-jing-huo-xue-tang, and Zhi-bai-di-huang-wan. In the late fracture period, the top three formulas were Shu-jing-huo-xue-tang, Gui-lu-er-xian-jiao, and Du-huo-ji-sheng-tang. The main single herbs used in the early fracture period were Yan-hu-suo, Gu-sui-bu, and Dan-shen. From the middle to the late period, the most prescribed single herbs were Xu-duan, Gu-sui-bu, and Yan-hu-suo. We concluded that the results showed that the CGRD utilization pattern roughly meets the TCM theory at different fracture periods.

Rechargeable post Li-ion batteries based on aluminum (Al) are gaining attention due to high abundance of Al, the high theoretical volumetric capacity, and high safety associated with the low flammability [1,2]. In comparison to Li-ion batteries (LiBs), where the solid-electrolyte interphase (SEI) has been studied for decades, little is known on SEI formation in dependence of the used electrolyte for Al electrodes. In this study, we present the electrochemical performance of Al foils with two different thicknesses (0.025 mm and 0.075 mm), which were used as negative electrode in Al-ion batteries in AlCl3/1-ethyl-3-methylimidazolium chloride [EMIm]Cl electrolyte. Atomic force microscopy (AFM) was used to determine changes in the morphology of Al foils during the charge - discharge process to obtain information on the SEI and its microstructural morphology [3]. Spatially-resolved information on the electrochemical activity of interphase layers on cycled Al foils can be obtained via scanning electrochemical microscopy (SECM), which so far has only be studied at LiBs [4]. First results reveal the correlation between the morphological changes of SEI layer during cycling and its electrochemical behavior depending on the Al foil surface properties, which will be presented and discussed in this contribution. Key words: Al foil, AFM, microstructure, SEI layer, SECM. References: Meng-Chang Lin, Ming Gong, Bingan Lu, Yingpeng Wu, Di-Yan Wang, Mingyun Guan, Michael Angell, Changxin Chen, Jiang Yang, Bing-Joe Hwang and Hongjie Dai, Nature, 520, 325–328 (2015). Li, and N.J. Bjerrum, J. Power Sources, 110, 1–10 (2002). Feng Wu, Na Zhu, Ying Bai, Yaning Gao, and Chuan Wu, Green Energy & Environment 3, 71-77, (2018). Bastian Krueger, Luis Balboa, Jan Frederik Dohmann, Martin Winter, Peter Bieker and Gunther Wittstock. ChemElectroChem,7, 3590–3596, (2020). This work contributes to the research performed at CELEST (Center for Electrochemical Energy Storage Ulm-Karlsruhe) and was funded by the German Research Foundation (DFG) under Project ID 390874152 (POLiS Cluster of Excellence).

Lithium-ion batteries (LIBs) and alkaline batteries have been widely used in electric vehicles and portable electronics, dominating the energy storage market for decades,[1] but their recycling/upcycling has lagged far behind. Re/up-cycling batteries is urgently needed because it can not only preserve raw materials such as Li, Co, Ni, Mn, Al, and Cu for LIBs as well as Zn, Mn, Fe for alkaline batteries but also reduce hazardous wastes towards the environment.[2] Despite previous efforts made on re/up-cycling LIBs and alkaline batteries, there remains an urgent demand for simple, economic, environmentally benign, and energy-saving approaches. For LIB recycling, the dominated recycling methods including pyrometallurgy and hydrometallurgy are destructive and criticized of high energy consumption, undesirable economic outputs, and water contamination. By contrast, non-destructive methods such as solid-state sintering[3] and hydrothermal treatment coupled with short annealing (HT-SA) [4-5]are more promising. However, these emerged direct recycling approaches are deficient at regenerating outdated cathode materials to meet current market need. As such, upcycling (i.e., upgraded regeneration of cathodes) through surface engineering (coating[6] and doping[7-9]) or bulk reconstruction[10] has been developed. In our work, we demonstrate one upcycling approach to regenerate LiCoO2 cathode through an improved HT-SA approach in which a coating layer is prepared accompanied with the regeneration process. The upcycled cathode material shows improved electrochemical performance surpassing the pristine electrode materials. For alkaline battery recycling, the major recycling still focuses on hydrometallurgy and pyrometallurgy. Hydrometallurgical processes generally follow different steps of pre-treatment and subsequent leaching and separation of different metals by electrolysis, extraction or precipitation.[11] Another approach for treating spent alkaline battery materials is upcycling towards other applications such as supercapacitors,[12] catalysis[13], micronutrient fertilizer,[14] Mn alloy fabrication.[14] In our work, for the first time, we directly upcycle both zinc anode and Mn-based cathode for their use in rechargeable Zn-MnO2 batteries by a simple yet efficient annealing procedure. Zn was regenerated in a reductive atmosphere and the regenerated Zn shows high Coulombic efficiency and long life in symmetric cells while the regenerated Mn-based cathode shows superior performance than fresh MnO2 with regards to capacity, rate, and life. Under optimized N/P ratio, the regenerated Zn and MnO2 was paired to make rechargeable Zn-MnO2 batteries delivering excellent performance, comparable or even superior to state-of-the-art Zn-MnO2 batteries. Reference [1] Li, M.; Lu, J.; Chen, Z.; Amine, K.Advanced Materials 2018, 30, 1800561. [2] Rarotra, S.; Sahu, S.; Kumar, P.; Kim, K.-H.; Tsang, Y. F.; Kumar, V.; Kumar, P.; Srinivasan, M.; Veksha, A.; Lisak, G. ChemistrySelect 2020, 5, 6182. [3] Fan, M.; Chang, X.; Guo, Y.-J.; Chen, W.-P.; Yin, Y.-X.; Yang, X.; Meng, Q.; Wan, L.-J.; Guo, Y.-G., Energy Environ. Sci. 2021, 14 (3), 1461-1468. [4] Xu, P.; Dai, Q.; Gao, H.; Liu, H.; Zhang, M.; Li, M.; Chen, Y.; An, K.; Meng, Y. S.; Liu, P.; Li, Y.; Spangenberger, J. S.; Gaines, L.; Lu, J.; Chen, Z., Joule 2020, 4 (12), 2609-2626. [5] Shi, Y.; Chen, G.; Liu, F.; Yue, X.; Chen, Z., ACS Energy Lett. 2018, 3 (7), 1683-1692. [6] Meng, X.; Cao, H.; Hao, J.; Ning, P.; Xu, G.; Sun, Z., ACS Sustain. Chem. Eng. 2018, 6 (5), 5797-5805. [7] Wu, J.; Lin, J.; Fan, E.; Chen, R.; Wu, F.; Li, L., ACS Appl. Energy Mater. 2021, 4 (3), 2607-2615. [8] Fan, X.; Tan, C.; Li, Y.; Chen, Z.; Li, Y.; Huang, Y.; Pan, Q.; Zheng, F.; Wang, H.; Li, Q. J. Hazard. Mater. 2021, 410, 124610. [9] Xu, B.; Dong, P.; Duan, J.; Wang, D.; Huang, X.; Zhang, Y., Ceram. Int. 2019, 45 (9), 11792-11801. [10] Gaines, L.; Dai, Q.; Vaughey, J. T.; Gillard, S. Recycling 2021, 6 (2). [11] Ferella, F.; De Michelis, I.; Vegliò, F. Journal of Power Sources 2008, 183, 805. [12] Farzana, R.; Hassan, K.; Sahajwalla, V.Scientific Reports 2019, 9, 8982. [13] Gallegos, M. V.; Falco, L. R.; Peluso, M. A.; Sambeth, J. E.; Thomas, H. J.Waste Management 2013, 33, 1483. [14] Hu, X.; Robles, A.; Vikström, T.; Väänänen, P.; Zackrisson, M.; Ye, G., Journal of Hazardous Materials 2021, 411, 124928.

Novel Coronavirus 2019 (covid-19) is a generation of the coronavirus that humans have never identified. This virus was first reported to cause an outbreak in Wuhan, China, in December 2019. Until now, covid-19 infection cases have been reported in many countries, such as Thailand, Japan, South Korea, Iran, Italy, Germany, and more than 90 countries worldwide. Until November 1, 2020, a total of 412.784 positive cases of covid-19 were recorded, with 341.942 recovered patients and 13.943 deaths in Indonesia. The purpose of this event is to anticipate the spread of Covid-19 by reminding the public to maintain health protocols and other alternatives in preserving health, also increasing body immunity through massage and traditional Indonesian herbal medicine. This event received a good response from the public. It was evidenced by the number of participants exceeding the predetermined quota and enthusiastic in following the speaker's material. The event was a success and was well received by the participants as well as the local government. After following this event, participants can practise the knowledge obtained from the presenters to maintain and protect their health and immunity from Covid-19. Keywords: Covid-19, Community service, body immunity DAFTAR PUSTAKA Amri, Sofan. Iif Khoiru Ahmadi. 2010. Proses Pembelajaran Kreatif dan Inovatif Dalam Kelas: Metode, Landasan Teoritis-Praktis dan Penerapannya. Jakarta: PT. Prestasi Pustakaraya. Badan Pusat Statistik Kota Surabaya. “Jumlah RT RW Kecamatan Dukuh Pakis Menurut Kelurahan Tahun 2017”. surabayakota.bps.go.id. https://surabayakota.bps.go.id/statictable/2018/04/19/594/jumlah-rt-rw-kecamatan-dukuh-pakis-menurut-kelurahan-tahun-2017.html. (diakses 15 Desember 2020). Huang C, Wang Y, Li X, Ren L, Zhao J, Hu Y, Zhang L, Fan G, Xu J, Gu X, Cheng Z. 2020. “Clinical features of patients infected with 2019 novel coronavirus in Wuhan, China”. Lancet 2020: 395: 497-506. doi: https://doi.org/10.1016/S0140-6736(20)30183-5. Kementerian Kesehatan Republik Indonesia. 2020. Pedoman Kesiapsiagaan Menghadapi Coronavirus Disease (covid-19). Jakarta: Direktorat Jenderal Pencegahan dan Pengendalian Penyakit (P2P). Komite Penanganan Covid-19 dan Pemulihan Ekonomi Nasional. “Pasien Sembuh Harian Mencapai 4.141 Orang”. covid19.go.id. https://covid19.go.id/berita/pasien-sembuh-harian-mencapai-4141-orang. (diakses 15 Desember 2020). Kumar, M., & Dwivedi, S. 2020. “Impact of Coronavirus Imposed Lockdown on Indian Population and their Habits”. International Journal of Science and Healthcare Research Vol.5 Issue: 2: April-June 2020. ISSN: 2455-7587. Li, S., Wang, Y., Xue, J., Zhao, N., & Zhu, T. 2020. “The impact of covid-19 epidemic declaration on psychological consequences: A study on active weibo users”. International Journal of Environmental Research and Public Health, 17(6), 1–9. doi: https://doi.org/10.3390/ijerph17062032. Pemerintah Kota Surabaya, “Statistik”. lawancovid-19.surabaya.go.id. https://lawancovid-19.surabaya.go.id/visualisasi/graph. (diakses 15 Desember 2020). Rizma Riyandi. “Data Kecamatan Surabaya: Dukuh Pakis, Penduduk dan Wilayah”. ayosurabaya.com. https://www.ayosurabaya.com/read/2020/09/28/3230/data-kecamatan-surabaya-dukuh-pakis-penduduk-dan-wilayah. (diakses 15 Desember 2020). Zhu N, Zhang D, Wang W, Li X, Yang B, Song J, Zhao X, Huang B, Shi W, Lu R, Niu P. 2020. “A novel coronavirus from patients with pneumonia in China, 2019”. New England Journal of Medicine 2020: 382: 727-733. doi: 10.1056/NEJMoa2001017

Knowledge about clean and healthy life in children needs to be given early to shape behavior in everyday life. Knowledge about healthy living can be provided at school through various learning programs. This study aims to find the effectiveness of health promotion programs (JUMSIH) to increase children's knowledge about clean and healthy living. The research method is a pre-experimental one-shot case study design. The respondents of this study were 68 students aged 7-8 years. The results showed that the JUMSIH program can help children have knowledge about healthy living. Based on data analysis, n = 15 generally obtained scores above 2.6. It was concluded that healthy living skills are often performed by students such as hand washing, bathing, and toothbrush behavior which are basic skills for children to be able to live healthy lives. Suggestions for further research which is the development of various programs to increase awareness of clean and healthy living from an early age. Keywords: Clean and healthy life Knowledge, Early Childhood, Health Promotion Program (JUMSIH) References: Akçay, N. O. (2016). Implementation of Cooperative Learning Model in Preschool. Journal of Education and Learning, 5(3), 83–93. https://doi.org/10.5539/jel.v5n3p83 Allport, B. S., Johnson, S., Aqil, A., Labrique, A. B., Nelson, T., KC, A., … Marcell, A. V. (2018). Promoting Father Involvement for Child and Family Health. Academic Pediatrics, 18(7), 746–753. https://doi.org/10.1016/j.acap.2018.03.011 Bonuck, K. A., Schwartz, B., & Schechter, C. (2016). Sleep health literacy in head start families and staff: Exploratory study of knowledge, motivation, and competencies to promote healthy sleep. Sleep Health, 2(1), 19–24. https://doi.org/10.1016/j.sleh.2015.12.002 Considerations, P., & Framework, N. Q. (2010). Health , Hygiene and Infection Control Strategies for Policy Implementation :2010(Vic). Conti, G., Heckman, J. J., & Pinto, R. (2016). The Effects of Two Influential Early Childhood Interventions on Health and Healthy Behaviour. Economic Journal, 126(596), F28–F65. https://doi.org/10.1111/ecoj.12420 Creswell, J. W. (2012). Educational Research Planning, Conducting, and Evaluating Quantitative and Qualitative Research(4th ed.; P. A. Smith, Ed.). Boston: Pearson. Duxbury, T., Bradshaw, K., Khamanga, S., Tandlich, R., & Srinivas, S. (2019). Environmental health promotion at a National Science Festival: An experiential-education based approach. Applied Environmental Education and Communication, 0(0), 1–16. https://doi.org/10.1080/1533015X.2019.1567406 Fernandez-Jimenez, R., Al-Kazaz, M., Jaslow, R., Carvajal, I., & Fuster, V. (2018). Children Present a Window of Opportunity for Promoting Health: JACC Review Topic of the Week. Journal of the American College of Cardiology, 72(25), 3310–3319. https://doi.org/10.1016/j.jacc.2018.10.031 Fung, C., Kuhle, S., Lu, C., et al. (2012). From “best practice” to “next practice”: the effectiveness of school-based health promotion in improving healthy eating and physical activity and preventing childhood obesity. Int. J. Behav. Nutr. Phys. Act., 9, 27. Gall, M. D., Gall, J. P., & Borg, W. R. (2007). Educational Research: An Introduction (4th ed.). New York: Longman Inc. Goldfeld, S., O’Connor, E., O’Connor, M., Sayers, M., Moore, T., Kvalsvig, A., & Brinkman, S. (2016). The role of preschool in promoting children’s healthy development: Evidence from an Australian population cohort. Early Childhood Research Quarterly, 35, 40–48. https://doi.org/10.1016/j.ecresq.2015.11.001 Hawe, P., Potvin, L. (2009). What is population health intervention research. Can. J. Public Health, 100 (Suppl I8–14). Julianti, R., Nasirun, M., & Wembrayarli. (2018). Pelaksanaan Perilaku Hidup Bersih dan Sehat (PHBS) di Lingkungan Sekolah. Jurnal Ilmiah Potensia, 3(1), 11–17. Kasnodihardjo, K. (2010). Metode pelembagaan perilaku hidup sehat kaitannya dengan kesehatan lingkungan dan hygiene perorangan pada keluarga di Subang Jabar. Keshavarz, N., Nutbeam, D., Rowling, L., Khavarpour, F. (2010). Schools as social complex adaptive systems: a new way to understand the challenges of introducing the health promoting schools concept. Soc. Sci. Med., (70), 1467–1474. Kobel, S., Wartha, O., Wirt, T., Dreyhaupt, J., Lämmle, C., Friedemann, E. M., … Steinacker, J. M. (2017). Design, implementation, and study protocol of a kindergarten-based health promotion intervention. BioMed Research International, 2017. https://doi.org/10.1155/2017/4347675 Langford, R., Bonell, C.P., Jones, H. E. (2014). The WHO health promoting school framework for improving the health and well-being of students and their academic achievement. Cochrane Database Syst, Rev. 4, CD008958. Manning, M. L., & Lucking, R. (1991). The what, why, and how of cooperative learning. The Clearing House. 64(3), 152–156. Marlina, R. L. (2011). Analisis Manajemen Promosi Kesehatan Dalam Penerapan Perilaku Hidup Bersih dan Sehat (PHBS) Tatanan Rumah Tangga di Kota Padang Tahun 2011. Padang: Universitas Andalas. Maryunani, A. (2013). Perilaku Hidup Bersih dan Sehat. Jakarta: Trans Info Media. McClure, M., Tarr, P., Thompson, C. M., & Eckhoff, A. (2017). Defining quality in visual art education for young children: Building on the position statement of the early childhood art educators. Arts Education Policy Review, 118(3), 154–163. https://doi.org/10.1080/10632913.2016.1245167 Mcisaac, J. D., Sim, S. M., Penney, T. L., & Kirk, S. F. L. (2012). School Health Promotion Policy in Nova Scotia: A Case Study. Revue PhénEPS / PHEnex Journal, 4(2). McIsaac, J. L. D., Penney, T. L., Ata, N., Munro-Sigfridson, L., Cunningham, J., Veugelers, P. J., … Kuhle, S. (2017). Evaluation of a health promoting schools program in a school board in Nova Scotia, Canada. Preventive Medicine Reports, 5, 279–284. https://doi.org/10.1016/j.pmedr.2017.01.008 Midcentraldhb. (2014). Health and Safety Guidelines for Early Childhood Education Services. https://doi.org/2014 Mikkonen, J., Raphael, D. (2010). Social Determinants of Health: The Canadian Facts. University School of Health Policy and Management Toronto. Proverawati, A. (2012). Perilaku Hidup Bersih dan Sehat. Yogyakarta: Nuha Medika. Reed, K.E., Warburton, D.E., Macdonald, H.M., Naylor, P.J., McKay, H. A. (2008). Action Schools! BC: a school-based physical activity intervention designed to decrease cardiovascular disease risk factors in children. Prev. Med, 46, 525–531. Samdal, O., Rowling, L. (2011). Theoretical and empirical base for implementation components of health-promoting schools. Health Educ., 111, 367–390. Syukriyah, E. (2011). Gambaran Pengetahuan, Sikap dan Tindakan Murid SD Tentang PHBS di SDN 06 Lubuk LayangPadang. Padang: Poletkkes Kemenkes Padang. Veugelers, P. J., & Schwartz, M. E. (2010). Comprehensive school health in Canada. Canadian Journal of Public Health = Revue Canadienne de Sante Publique, 101 Suppl(August), S5-8. https://doi.org/10.17269/cjph.101.1907 WHO. (2016). What is a health promoting school? WIjayanti, N. A. (2017). Implementation of Role Playing Method in the Hygiene Hadith Learning Toward Early CHildrens Healthy Behavior of Group B in Dabin Aggrek Gunungpati Semarang. Early Childhood Education Papers (Belia), 6(2).

In this paper, miniaturized design of a plasmonic Bragg grating filter is investigated via the finite element method (FEM). The filter is based on a plasmonic metal-insulator-metal waveguide deposited on a quartz substrate. The corrugated Bragg grating designed for near-infrared wavelength range is structured on both sides of the waveguide. The spectral characteristics of the filter are studied by varying the geometric parameters of the filter design. As a result, the maximum ER and bandwidth of 36.2 dB and 173 nm is obtained at λBragg=976 nm with a filter footprint of as small as 1.0 x 8.75 µm2, respectively. The ER and bandwidth can be further improved by increasing the number of grating periods and the strength of the grating, respectively. Moreover, the Bragg grating structure is quite receptive to the refractive index of the medium. These features allow the employment of materials such as polymers in the metal-insulator-metal waveguide which can be externally tuned or it can be used for refractive index sensing applications. The sensitivity of the proposed Bragg grating structure can offer a sensitivity of 950 nm/RIU. We believe that the study presented in this paper provides a guideline for the realization of small footprint plasmonic Bragg grating structures which can be employed in filter and refractive index sensing applications. Full Text: PDF ReferencesJ. W. Field et al., "Miniaturised, Planar, Integrated Bragg Grating Spectrometer", 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference (CLEO/Europe-EQEC), Munich, Germany, 2019, CrossRef L. Cheng, S. Mao, Z. Li, Y. Han, H.Y. Fu, "Grating Couplers on Silicon Photonics: Design Principles, Emerging Trends and Practical Issues", Micromachines, 11, 666 (2020). CrossRef J. Missinne, N. T. Beneitez, M-A. Mattelin, A. Lamberti, G. Luyckx, W. V. Paepegem, G. V. Steenberge, "Bragg-Grating-Based Photonic Strain and Temperature Sensor Foils Realized Using Imprinting and Operating at Very Near Infrared Wavelengths", Sensors, 18, 2717 (2018). CrossRef M. A. Butt, S.N. Khonina, N.L. Kazanskiy, "Numerical analysis of a miniaturized design of a Fabry–Perot resonator based on silicon strip and slot waveguides for bio-sensing applications", Journal of Modern Optics, 66, 1172-1178 (2019). CrossRef H. Qiu, J. Jiang, P. Yu, T. Dai, J. Yang, H. Yu, X. Jiang, "Silicon band-rejection and band-pass filter based on asymmetric Bragg sidewall gratings in a multimode waveguide", Optics Letters, 41, 2450 (2016). CrossRef M. A. Butt, S.N. Khonina, N.L. Kazanskiy, "Optical elements based on silicon photonics", Computer Optics, 43, 1079-1083 (2019). CrossRef N. L. Kazanskiy, S.N. Khonina, M.A. Butt, "Plasmonic sensors based on Metal-insulator-metal waveguides for refractive index sensing applications: A brief review", Physica E, 117, 113798 (2020). CrossRef L. Lu et al, "Mode-Selective Hybrid Plasmonic Bragg Grating Reflector", IEEE Photonics Technology Letters, 22, 1765-1767 (2012). CrossRef R. Negahdari, E. Rafiee, F. Emami, "Design and simulation of a novel nano-plasmonic split-ring resonator filter", Journal of Electromagnetic Waves and Applications, 32, 1925-1938 (2018). CrossRef M. Janfaza, M. A. Mansouri-Birjandi, "Tunable plasmonic band-pass filter based on Fabry–Perot graphene nanoribbons", Applied Physics B, 123, 262 (2017). CrossRef C. Wu, G. Song, L. Yu, J.H. Xiao, "Tunable narrow band filter based on a surface plasmon polaritons Bragg grating with a metal–insulator–metal waveguide", Journal of Modern Optics, 60, 1217-1222 (2013). CrossRef J. Zhu, G. Wang, "Sense high refractive index sensitivity with bragg grating and MIM nanocavity", Results in Physics, 15, 102763 (2019). CrossRef Y. Binfeng, H. Guohua, C. Yiping, "Design of a compact and high sensitive refractive index sensor base on metal-insulator-metal plasmonic Bragg grating", Optics Express, 22, 28662-28670 (2014). CrossRef A.D. Simard, Y. Painchaud, S. Larochelle, "Small-footprint integrated Bragg gratings in SOI spiral waveguides", International Quantum Electronics Conference Lasers and Electro-Optics Europe, IEEE, Munich, Germany (2013). CrossRef C. Klitis, G. Cantarella, M. J. Strain, M. Sorel, "High-extinction-ratio TE/TM selective Bragg grating filters on silicon-on-insulator", Optics Letters, 42, 3040 (2017). CrossRef J. Ctyroky et al., "Design of narrowband Bragg spectral filters in subwavelength grating metamaterial waveguides", Optics Express, 26, 179 (2018). CrossRef M.A. Butt, N.L. Kazanskiy, S.N. Khonina, "Hybrid plasmonic waveguide race-track µ-ring resonator: Analysis of dielectric and hybrid mode for refractive index sensing applications", Laser Phys., 30, 016202 (2020). CrossRef M. A. Butt, N.L. Kazanskiy, S.N. Khonina, "Label-free detection of ambient refractive index based on plasmonic Bragg gratings embedded resonator cavity sensor", Journal of Modern Optics, 66, 1920-1925 (2019). CrossRef N. L. Kazanskiy, M.A. Butt, Photonics Letters of Poland, 12, 1-3 (2020). CrossRef Z. Guo, K. Wen, Q. Hu, W. Lai, J. Lin, Y. Fang, "Plasmonic Multichannel Refractive Index Sensor Based on Subwavelength Tangent-Ring Metal–Insulator–Metal Waveguide", Sensors, 18, 1348 (2018). CrossRef

We present a surface plasmon resonance (SPR) structure based on Kretschmann configuration incorporating bimetallic layers of noble (Ag) and magnetic materials (Ni) over CaF2 prism. Extensive numerical analysis based on transfer matrix theory has been performed to characterize the sensor response considering sensitivity, full width at half maxima, and minimum reflection. Notably, the proposed structure, upon suitably optimizing the thickness of bimetallic layer provides consistent enhancement of sensitivity over other competitive SPR structures. Hence we believe that this proposed SPR sensor could find the new platform for the medical diagnosis, chemical examination and biological detection. Full Text: PDF ReferencesJ. Homola, S.S. Yee, G. Gauglitz, "Surface plasmon resonance sensor based on planar light pipe: theoretical optimization analysis", Sens. Actuators B Chem. 54, 3 (1999). CrossRef X.D. Hoa, A.G. Kirk, M. Tabrizian, "Towards integrated and sensitive surface plasmon resonance biosensors: A review of recent progress", Bioelectron, 23, 151 (2007). CrossRef Z. Lin, L. Jiang, L. Wu, J. Guo, X. Dai, Y. Xiang, D. Fan, "Tuning and Sensitivity Enhancement of Surface Plasmon Resonance Biosensor With Graphene Covered Au-MoS 2-Au Films", IEEE Photonics J. 8(6), 4803308 (2016). CrossRef T. Srivastava, R. Jha, R. Das, "High-Performance Bimetallic SPR Sensor Based on Periodic-Multilayer-Waveguides", IEEE Photonics Technol. Lett. 23(20), 1448 (2011). CrossRef P.K. Maharana, R. Jha, "Chalcogenide prism and graphene multilayer based surface plasmon resonance affinity biosensor for high performance", Sens. Actuators B Chem. 169, 161 (2012). CrossRef R. Verma, B.D. Gupta, R. Jha, "Sensitivity enhancement of a surface plasmon resonance based biomolecules sensor using graphene and silicon layers", Sens. Actuators B Chem. 160, 623 (2011). CrossRef I. Pockrand, "Surface plasma oscillations at silver surfaces with thin transparent and absorbing coatings", Surf. Sci. 72, 577 (1978). CrossRef R. Jha, A. Sharma, "High-performance sensor based on surface plasmon resonance with chalcogenide prism and aluminum for detection in infrared", Opt. Lett. 34(6), 749 (2009). CrossRef E.V. Alieva, V.N. Konopsky, "Biosensor based on surface plasmon interferometry independent on variations of liquid’s refraction index", Sens. Actuators B Chem. 99, 90 (2004). CrossRef S.A. Zynio, A. Samoylov, E. Surovtseva, V. Mirsky, Y. Shirshov, "Bimetallic Layers Increase Sensitivity of Affinity Sensors Based on Surface Plasmon Resonance", Sensors 2, 62 (2002). CrossRef S.Y. Wu, H.P. Ho, "Sensitivity improvement of the surface plasmon resonance optical sensor by using a gold-silver transducing layer", Proceedings IEEE Hong Kong Electron Devices Meeting 63 (2002). CrossRef B.H. Ong, X. Yuan, S. Tjin, J. Zhang, H. Ng, "Optimised film thickness for maximum evanescent field enhancement of a bimetallic film surface plasmon resonance biosensor", Sens. Actuators B Chem. 114, 1028 (2006). CrossRef B.H. Ong, X. Yuan, Y. Tan, R. Irawan, X. Fang, L. Zhang, S. Tjin, "Two-layered metallic film-induced surface plasmon polariton for fluorescence emission enhancement in on-chip waveguide", Lab Chip 7, 506 (2007). CrossRef X. Yuan, B. Ong, Y. Tan, D. Zhang, R. Irawan, S. Tjin, "Sensitivity–stability-optimized surface plasmon resonance sensing with double metal layers", J. Opt. A: Pure Appl. Opt. 8, 959, (2006). CrossRef M. Ghorbanpour, "A novel method for the production of highly adherent Au layers on glass substrates used in surface plasmon resonance analysis: substitution of Cr or Ti intermediate layers with Ag layer followed by an optimal annealing treatment", J. Nanostruct, 3, 309, (2013). CrossRef Y. Chen, R.S. Zheng, D.G. Zhang, Y.H. Lu, P. Wang, H. Ming, Z.F. Luo, Q. Kan, "Bimetallic chips for a surface plasmon resonance instrument", Appl. Opt. 50, 387 (2011). CrossRef N.H.T. Tran, B.T. Phan, W.J. Yoon, S. Khym, H. Ju, "Dielectric Metal-Based Multilayers for Surface Plasmon Resonance with Enhanced Quality Factor of the Plasmonic Waves", J. Electron. Mater. 46, 3654 (2017). CrossRef D. Nesterenko Z. Sekkat, "Resolution Estimation of the Au, Ag, Cu, and Al Single- and Double-Layer Surface Plasmon Sensors in the Ultraviolet, Visible, and Infrared Regions", Plasmonics 8, 1585 (2013). CrossRef M.A. Ordal, R.J. Bell, R.W. Alexander, L.L. Long, M.R. Querry, "Optical properties of fourteen metals in the infrared and far infrared: Al, Co, Cu, Au, Fe, Pb, Mo, Ni, Pd, Pt, Ag, Ti, V, and W.", Appl. Opt. 24, 4493 (1985). CrossRef H. Ehrenreich, H.R. Philipp, D.J. Olechna, "Optical Properties and Fermi Surface of Nickel", Phys. Rev. 31, 2469 (1963). CrossRef S. Shukla, N.K. Sharma, V. Sajal, "Theoretical Study of Surface Plasmon Resonance-based Fiber Optic Sensor Utilizing Cobalt and Nickel Films", Braz. J. Phys. 46, 288 (2016). CrossRef K. Shah, N.K. Sharma, AIP Conf. Proc. 2009, 020040 (2018). [23] G. AlaguVibisha, Jeeban Kumar Nayak, P. Maheswari, N. Priyadharsini, A. Nisha, Z. Jaroszewicz, K.B. Rajesh, "Sensitivity enhancement of surface plasmon resonance sensor using hybrid configuration of 2D materials over bimetallic layer of Cu–Ni", Opt. Commun. 463, 125337 (2020). CrossRef A. Nisha, P. Maheswari, P.M. Anbarasan, K.B. Rajesh, Z. Jaroszewicz, "Sensitivity enhancement of surface plasmon resonance sensor with 2D material covered noble and magnetic material (Ni)", Opt. Quantum Electron. 51, 19 (2019). CrossRef M.H.H. Hasib, J.N. Nur, C. Rizal, K.N. Shushama, "Improved Transition Metal Dichalcogenides-Based Surface Plasmon Resonance Biosensors", Condens.Matter 4, 49, (2019). CrossRef S. Herminjard, L. Sirigu, H. P. Herzig, E. Studemann, A. Crottini, J.P. Pellaux, T. Gresch, M. Fischer, J. Faist, "Surface Plasmon Resonance sensor showing enhanced sensitivity for CO2 detection in the mid-infrared range", Opt. Express 17, 293 (2009). CrossRef M. Wang, Y. Huo, S. Jiang, C. Zhang, C. Yang,T. Ning, X. Liu, C Li, W. Zhanga, B. Mana, "Theoretical design of a surface plasmon resonance sensor with high sensitivity and high resolution based on graphene–WS2 hybrid nanostructures and Au–Ag bimetallic film", RSC Adv. 7, 47177 (2017). CrossRef P.K. Maharana, P. Padhy, R. Jha, "On the Field Enhancement and Performance of an Ultra-Stable SPR Biosensor Based on Graphene", IEEE Photonics Technol. Lett. 25, 2156 (2013). CrossRef

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vibration and Control 19 (8): 1139-1151. Epub ahead of print 24 April 2012. doi: 10.1177/1077546312442948 Hsu W-K, Chiou D-J, Chen C-W, Liu M-Y, Chiang W-L and Huang P-C (2013) Sensitivity of initial damage detection for steel structures using the Hilbert-Huang transform method Journal of Vibration and Control 19 (6): 857-878. Epub ahead of print 29 February 2012. doi: 10.1177/1077546311434794 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Human–machine interface for the motion control of humanoid biped robots using a graphical user interface Motion Editor Journal of Vibration and Control 19 (6): 814-820. Epub ahead of print 23 February 2012. doi: 10.1177/1077546312437804 Chen C-Y (2013) Internal wave transport, nonlinear manifestation, and mixing in a stratified shear layer - technical briefs Journal of Vibration and Control 19 (3): 429-438. Epub ahead of print 18 January 2012. doi: 10.1177/1077546311429337 Chen C-W (2013) Delay independent criterion for multiple time-delay systems and its application in building structure control systems Journal of Vibration and Control 19 (3): 395-414. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429341 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Design, modeling and stability control for an actuated dynamic walking planar bipedal robot Journal of Vibration and Control 19 (3): 376-384. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429476 Liu K-C, Liu Y-W, Chen C-Y and Huang W-C (2013) Nonlinear vibration of structural deterioration in reinforced concrete columns: experimental and theoretical investigation Journal of Vibration and Control 19 (3): 323-335. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429477 Chen C-Y, Shih B-Y and Ma J-m (2013) Development for low-cost and cross-platform robot control environment Journal of Vibration and Control 19 (2): 228-233. Epub ahead of print 11 January 2012. doi: 10.1177/1077546311430107 Shih B-Y, Chang H and Chen C-Y (2013) Path planning for autonomous robots – a comprehensive analysis by a greedy algorithm Journal of Vibration and Control 19 (1): 130-142. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429841 Liu T-Y, Chiang W-L, Chen C-W, Hsu W-K, Lin C-W, Chiou D-J and Huang P-C (2012) Structural system identification for vibration bridges using the Hilbert–Huang transform Journal of Vibration and Control 18 (13): 1939-1956. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428347 Chen C-W (2012) Applications of the fuzzy Lyapunov linear matrix inequality criterion to a chaotic structural system Journal of Vibration and Control 18 (13): 1925-1938. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428346 Chen C-W (2012) Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review Journal of Vibration and Control 18 (12): 1886-1899. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428345 Shih B-Y, Chen C-Y and Chou W (2012) An enhanced obstacle avoidance and path correction mechanism for an autonomous intelligent robot with multiple sensors Journal of Vibration and Control 18 (12): 1855-1864. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311426734 Chen C-W, Yeh K, Liu KFR and Lin M-L (2012) Applications of fuzzy control to nonlinear time-delay systems using the linear matrix inequality fuzzy Lyapunov method Journal of Vibration and Control 18 (10): 1561-1574. Epub ahead of print 18 October 2011. doi: 10.1177/1077546311410765 Chen C-Y (2012) A critical review of internal wave dynamics. Part 2 – Laboratory experiments and theoretical physics Journal of Vibration and Control 18 (7): 983-1008. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310397561 Chen C-Y and Huang P-H (2012) Review of an autonomous humanoid robot and its mechanical control Journal of Vibration and Control 18 (7): 973-982. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310395974 Shih B-Y, Chen C-Y, Chang H and Ma J-m (2012) Dynamics and control for robotic manipulators using a greedy algorithm approach Journal of Vibration and Control 18 (6): 859-866. Epub ahead of print 25 August 2011. doi: 10.1177/1077546311407649 Yeh K, Chen C-W, Lo DC and Liu KFR (2012) Neural-network fuzzy control for chaotic tuned mass damper systems with time delays Journal of Vibration and Control 18 (6): 785-795. Epub ahead of print 15 August 2011. doi: 10.1177/1077546311407538 Chen C-Y, Shih B-Y, Shih C-H and Chou W-C (2012) The development of autonomous low-cost biped mobile surveillance robot by intelligent bricks Journal of Vibration and Control 18 (5): 577-586. Epub ahead of print 21 April 2011. doi: 10.1177/1077546310371349 Chen C-Y (2012) A critical review of internal wave dynamics. Part 1 – Remote sensing and in-situ observations Journal of Vibration and Control 18 (3): 417-436. Epub ahead of print 13 July 2011. doi: 10.1177/1077546310395971 Tseng C-P, Chen C-W and Liu KFR (2012) Risk control allocation model for pressure vessels and piping project Journal of Vibration and Control 18 (3): 385-394. Epub ahead of print 13 July 2011. doi: 10.1177/1077546311403182 Lin M-L and Chen C-W (2011) Stability analysis of community and ecosystem hierarchies using the Lyapunov method Journal of Vibration and Control 17 (13): 1930-1937. Epub ahead of print 9 December 2010. doi: 10.1177/1077546310385737 Chen C-Y, Shih B-Y, Chou W-C, Li Y-J and Chen Y-H (2011) Obstacle avoidance design for a humanoid intelligent robot with ultrasonic sensors Journal of Vibration and Control 17 (12): 1798-1804. Epub ahead of print 26 November 2010. doi: 10.1177/1077546310381101 Chen C-W (2011) Fuzzy control of interconnected structural systems using the fuzzy Lyapunov method Journal of Vibration and Control 17 (11): 1693-1702. Epub ahead of print 23 November 2010. doi: 10.1177/1077546310379625 Shih B-Y, Chen C-Y and Chou W-C (2011) Obstacle avoidance using a path correction method for autonomous control of a biped intelligent robot Journal of Vibration and Control 17 (10): 1567-1573. Epub ahead of print 22 November 2010. doi: 10.1177/1077546310372004 Tang J-P, Chiou D-J, Chen C-W, Chiang W-L, Hsu W-K, Chen C-Y and Liu T-Y (2011) A case study of damage detection in benchmark buildings using a Hilbert-Huang Transform-based method Journal of Vibration and Control 17 (4): 623-636. Epub ahead of print 8 November 2010. doi: 10.1177/1077546309360053 Liu TY, Chiang WL, Chen CW, Hsu WK, Lu LC and Chu TJ (2011) Identification and monitoring of bridge health from ambient vibration data Journal of Vibration and Control 17 (4): 589-603. Epub ahead of print 12 November 2010. doi: 10.1177/1077546309360049 Lin JW, Huang CW, Shih CH and Chen CY (2011) Fuzzy Lyapunov Stability Analysis and NN Modeling for Tension Leg Platform Systems Journal of Vibration and Control 17 (1): 151-158. Epub ahead of print 25 August 2010. doi: 10.1177/1077546309350477 Lee WI, Chen CY, Kuo HM and Sui YC (2010) The Development of Half-circle Fuzzy Numbers and Application in Fuzzy Control Journal of Vibration and Control 16 (13): 1977-1987. Epub ahead of print 22 April 2010. doi: 10.1177/1077546309349849

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vibration and Control 19 (8): 1139-1151. Epub ahead of print 24 April 2012. doi: 10.1177/1077546312442948 Hsu W-K, Chiou D-J, Chen C-W, Liu M-Y, Chiang W-L and Huang P-C (2013) Sensitivity of initial damage detection for steel structures using the Hilbert-Huang transform method Journal of Vibration and Control 19 (6): 857-878. Epub ahead of print 29 February 2012. doi: 10.1177/1077546311434794 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Human–machine interface for the motion control of humanoid biped robots using a graphical user interface Motion Editor Journal of Vibration and Control 19 (6): 814-820. Epub ahead of print 23 February 2012. doi: 10.1177/1077546312437804 Chen C-Y (2013) Internal wave transport, nonlinear manifestation, and mixing in a stratified shear layer - technical briefs Journal of Vibration and Control 19 (3): 429-438. Epub ahead of print 18 January 2012. doi: 10.1177/1077546311429337 Chen C-W (2013) Delay independent criterion for multiple time-delay systems and its application in building structure control systems Journal of Vibration and Control 19 (3): 395-414. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429341 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Design, modeling and stability control for an actuated dynamic walking planar bipedal robot Journal of Vibration and Control 19 (3): 376-384. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429476 Liu K-C, Liu Y-W, Chen C-Y and Huang W-C (2013) Nonlinear vibration of structural deterioration in reinforced concrete columns: experimental and theoretical investigation Journal of Vibration and Control 19 (3): 323-335. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429477 Chen C-Y, Shih B-Y and Ma J-m (2013) Development for low-cost and cross-platform robot control environment Journal of Vibration and Control 19 (2): 228-233. Epub ahead of print 11 January 2012. doi: 10.1177/1077546311430107 Shih B-Y, Chang H and Chen C-Y (2013) Path planning for autonomous robots – a comprehensive analysis by a greedy algorithm Journal of Vibration and Control 19 (1): 130-142. Epub ahead of print 17 January 2012. doi: 10.1177/1077546311429841 Liu T-Y, Chiang W-L, Chen C-W, Hsu W-K, Lin C-W, Chiou D-J and Huang P-C (2012) Structural system identification for vibration bridges using the Hilbert–Huang transform Journal of Vibration and Control 18 (13): 1939-1956. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428347 Chen C-W (2012) Applications of the fuzzy Lyapunov linear matrix inequality criterion to a chaotic structural system Journal of Vibration and Control 18 (13): 1925-1938. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428346 Chen C-W (2012) Applications of linear differential inclusion-based criterion to a nonlinear chaotic system: a critical review Journal of Vibration and Control 18 (12): 1886-1899. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311428345 Shih B-Y, Chen C-Y and Chou W (2012) An enhanced obstacle avoidance and path correction mechanism for an autonomous intelligent robot with multiple sensors Journal of Vibration and Control 18 (12): 1855-1864. Epub ahead of print 14 December 2011. doi: 10.1177/1077546311426734 Chen C-W, Yeh K, Liu KFR and Lin M-L (2012) Applications of fuzzy control to nonlinear time-delay systems using the linear matrix inequality fuzzy Lyapunov method Journal of Vibration and Control 18 (10): 1561-1574. Epub ahead of print 18 October 2011. doi: 10.1177/1077546311410765 Chen C-Y (2012) A critical review of internal wave dynamics. Part 2 – Laboratory experiments and theoretical physics Journal of Vibration and Control 18 (7): 983-1008. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310397561 Chen C-Y and Huang P-H (2012) Review of an autonomous humanoid robot and its mechanical control Journal of Vibration and Control 18 (7): 973-982. Epub ahead of print 21 September 2011. doi: 10.1177/1077546310395974 Shih B-Y, Chen C-Y, Chang H and Ma J-m (2012) Dynamics and control for robotic manipulators using a greedy algorithm approach Journal of Vibration and Control 18 (6): 859-866. Epub ahead of print 25 August 2011. doi: 10.1177/1077546311407649 Yeh K, Chen C-W, Lo DC and Liu KFR (2012) Neural-network fuzzy control for chaotic tuned mass damper systems with time delays Journal of Vibration and Control 18 (6): 785-795. Epub ahead of print 15 August 2011. doi: 10.1177/1077546311407538 Chen C-Y, Shih B-Y, Shih C-H and Chou W-C (2012) The development of autonomous low-cost biped mobile surveillance robot by intelligent bricks Journal of Vibration and Control 18 (5): 577-586. Epub ahead of print 21 April 2011. doi: 10.1177/1077546310371349 Chen C-Y (2012) A critical review of internal wave dynamics. Part 1 – Remote sensing and in-situ observations Journal of Vibration and Control 18 (3): 417-436. Epub ahead of print 13 July 2011. doi: 10.1177/1077546310395971 Tseng C-P, Chen C-W and Liu KFR (2012) Risk control allocation model for pressure vessels and piping project Journal of Vibration and Control 18 (3): 385-394. Epub ahead of print 13 July 2011. doi: 10.1177/1077546311403182 Lin M-L and Chen C-W (2011) Stability analysis of community and ecosystem hierarchies using the Lyapunov method Journal of Vibration and Control 17 (13): 1930-1937. Epub ahead of print 9 December 2010. doi: 10.1177/1077546310385737 Chen C-Y, Shih B-Y, Chou W-C, Li Y-J and Chen Y-H (2011) Obstacle avoidance design for a humanoid intelligent robot with ultrasonic sensors Journal of Vibration and Control 17 (12): 1798-1804. Epub ahead of print 26 November 2010. doi: 10.1177/1077546310381101 Chen C-W (2011) Fuzzy control of interconnected structural systems using the fuzzy Lyapunov method Journal of Vibration and Control 17 (11): 1693-1702. Epub ahead of print 23 November 2010. doi: 10.1177/1077546310379625 Shih B-Y, Chen C-Y and Chou W-C (2011) Obstacle avoidance using a path correction method for autonomous control of a biped intelligent robot Journal of Vibration and Control 17 (10): 1567-1573. Epub ahead of print 22 November 2010. doi: 10.1177/1077546310372004 Tang J-P, Chiou D-J, Chen C-W, Chiang W-L, Hsu W-K, Chen C-Y and Liu T-Y (2011) A case study of damage detection in benchmark buildings using a Hilbert-Huang Transform-based method Journal of Vibration and Control 17 (4): 623-636. Epub ahead of print 8 November 2010. doi: 10.1177/1077546309360053 Liu TY, Chiang WL, Chen CW, Hsu WK, Lu LC and Chu TJ (2011) Identification and monitoring of bridge health from ambient vibration data Journal of Vibration and Control 17 (4): 589-603. Epub ahead of print 12 November 2010. doi: 10.1177/1077546309360049 Lin JW, Huang CW, Shih CH and Chen CY (2011) Fuzzy Lyapunov Stability Analysis and NN Modeling for Tension Leg Platform Systems Journal of Vibration and Control 17 (1): 151-158. Epub ahead of print 25 August 2010. doi: 10.1177/1077546309350477 Lee WI, Chen CY, Kuo HM and Sui YC (2010) The Development of Half-circle Fuzzy Numbers and Application in Fuzzy Control Journal of Vibration and Control 16 (13): 1977-1987. Epub ahead of print 22 April 2010. doi: 10.1177/1077546309349849

LANGUAGE NOTE | Document text in Chinese; abstract also in English. 本文考訂楊伯峻《春秋左傳注》（以下簡稱《左傳注》），以《左傳》成公二年爲範圍，討論“無能爲役”“詰朝”、“朝食”、“大户”四則。經詞例分析，“無能爲役”之“役”當爲名詞，應從《左傳》襄公十七年《春秋左傳集解》（以下簡稱《集解》）釋爲“役事”，較《左傳注》解作“僕役”適洽。《左傳》四見“詰朝”，《集解》於三處釋“平旦”、一處釋“明朝”，《左傳注》解作明日早晨。本文讀“詰”爲“佶”而訓爲“正”，先秦典籍“正”字常有“平”義；至於“朝”與“旦”皆有“早”義，故“詰朝”即“平旦”。《左傳注》謂“朝食”爲早上進食，《史記》則將“朝食”寫爲“會食”。然就《左傳》載齊頃公“余姑翦滅此而朝食”語，顯是自認可在早上結束戰争，故“朝食”仍應解爲在早上進食。《集解》釋“大户”爲“閲民户口”而《左傳注》解作“清理户口”，“大户”之“大”應讀爲“汏”。《説文》謂“汏”字本義爲“淅㶕”，即後世所謂淘洗，沙汏、淘汏皆自“汏”字本義引申。從另一角度言，“淅㶕”亦有清理、計算義；且《左傳》“閲”字亦有“計算”義，故《集解》釋“大户”爲“閲民户口”即計算户籍，乃讀“大”爲“汏”。 This article examines four phrases in Yang Bojun’s Commentary on the Zuo Tradition of the Spring and Autumn Annals (hereafter Yang’s Commentary), namely “wu neng wei yi” 無能爲役, “jie chao” 詰朝, “zhao shi” 朝食, and “da hu” 大户, which are found in the second year of Duke Cheng of Lu (589 B.C.) in the Zuozhuan. According to the analysis of a register of example phrases, the word “yi” in the phrase “wu neng wei yi” should be regarded as a noun, which refers to “service matter” as seen in Duke Xiang 17 in Collective Exegeses on the Zuo Tradition of the Spring and Autumn Annals (hereafter, Collective Exegeses). This reading makes more sense than Yang’s Commentary, in which the word is glossed as “servant.” The phrase “jie chao” occurs four times in Zuozhuan. In Collective Exegeses it is glossed as “dawn” three times and as “the next morning” once. In Yang’s Commentary, however, all four occurrences are glossed as “the next morning.” The present article reads “jie” 詰 as “ji” 佶 and glosses it as “zheng” 正 (“the horizon”). In pre-Qin texts, the character “zheng” often carries the meaning of “the horizon.” The characters “chao” and “dan” both mean “dawn.” Therefore, the phrase “jie chao” refers to “dawn.” In Collective Exegeses, the phrase “zhao shi” is glossed as “eating a meal in the morning.” In the Shiji, “zhao shi” is written as “hui shi” 會食; however, the Zuozhuan records a sentence said by Duke Qing of Qi, “Yu gu jian mie ci er zhao shi” 余姑翦滅此而朝食, which clearly refers to a statement to himself that the battle could be over in the morning. Therefore, “zhao shi’ should still be understood as “eating a meal in the morning.” The Collective Exegeses glosses the phrase “da hu” as to “check on” (“yue” 閲) household occupants, while Yang’s Commentary glosses it as “canceling one’s residence registration.” Therefore, “da” should be read as “tai” 汏. According to the Shuowen, the original meaning of “tai” is “to wash in a pan or basket” (“xi jian” 淅㶕); referring to weeding out something/someone in today’s parlance. Moreover, several other phrases such as “sha tai” 沙汰 and “tao tai” 淘汰 were derived from the same original meaning. From another angle, the phrase “xi jian” also carries the meanings of “checking” or “calculating.” In the Zuozhuan, the word “yue” also means “calculating”; therefore, the phrase “da hu” means “checking on (“yue”) the household occupants or, in other words, to calculate household registries. The word “da” should be read as “tai”.

Penelitian ini bertujuan untuk menguji dan menganalisa pengaruh konflik peran dan ambiguitas terhadap kinerja melalui kepuasan kerja pada tenaga fungsional RSUD Sekadau. Metode penelitian yang digunakan merupakan jenis penelitian non-eksperimental dengan pendekatan kuantitatif, deskriptif korelasi dan desain cross-sectional. Populasi dalam penelitian ini adalah seluruh tenaga fungsional RSUD Sekadau yang berjumlah 181 orang dengan sampel yang diambil adalah 123 orang tenaga fungsional RSUD Sekadau. Alat analisis yang digunakan adalah analisis jalur (path analysis) dengan metode SEM (structural equation modelling) menggunakan WarpPLS versi 6.0. Hasil penelitian menunjukkan terdapat pengaruh positif signifikan konflik peran terhadap kinerja, terdapat pengaruh negatif signifikan ambiguitas terhadap kinerja, terdapat pengaruh negatif signifikan antara konflik peran dan ambiguitas terhadap kepuasan kerja, terdapat pengaruh negatif signifikan kepuasan kerja terhadap kinerja, terdapat pengaruh positif signifikan antara konflik peran dan ambiguitas terhadap kinerja melalui kepuasan kerja. Nilai profesionalisme menjadi penting untuk variabel konflik peran, tanggung jawab menjadi faktor penting untuk variabel ambiguitas, hubungan yang baik dengan profesi lain di Rumah Sakit menjadi penting untuk variabel kepuasan kerja dan karyawan memahami harapan pekerjaan dan tetap melaksanakannya sesuai dengan tanggung jawab merupakan nilai penting untuk variabel kinerja. Kata kunci : Konflik Peran, Ambiguitas, Kepuasan Kerja, KinerjaDAFTAR PUSTAKAAhmed, S., Manaf, N.H.A., & Islam, R. (2017). Measuring quality performance between public and private hospitals in Malaysia, International Journal of Quality and Service Sciences, Vol. 9 Iss 2 pp. 218-228Beauchamp, M.R., Bray, S.R., Fielding, A., & Eys, M.A. (2005). A Multilevel Investigation of the Relationship between Role Ambiguity and Role Efficacy in Sport. Psychology of Sport and Exercise, Vol. 6, pp. 289–302.Bhanugopan, R., & Fish, A. (2006). An empirical investigation of job burnout among expatriates. Personnel Review, 35(4), 449-468.Blackford, B. (2010). The Role of CEO Statements of Aggressiveness and the Competitive Aggressiveness of Firms: What is the Impact on Performance?Burney, L & Widener, SK. (2007). Strategic Performance Measurement Systems, Job-Relevant Information, and Managerial Behavioral Responses—Role Stress and Performance. Behavioral Research in Accounting, Vol. 19, pp. 43-69.Chen, J., & Silverthorne, C. (2008). The impact of locus of control on job stress, job performance and job satisfaction in Taiwan, Leadership & Organization Development Journal, Vol. 29 Issue: 7, pp.572-582Chu, C. I., Lee, M. S., & Hsu, H. M. (2006). The impact of social support and job stress on public health nurses' organizational citizenship behaviors in rural Taiwan. Public Health Nursing, 23(6), 496-505.Crossman, A., & Zaki, B.A. (2003). Job satisfaction and employee performance of Lebanese banking staff, Journal of Managerial Psychology, Vol. 18 Issue: 4, pp.368-376.Davis, K.,& Newstorm, J.W. (2001). Perilaku dalam Organisasi. Jilid I. Terjemahan Jakarta: ErlanggaDepartemen Kesehatan. (2015). Indikator Kinerja Rumah SakitDjebarni, R. (1996). The impact of stress in site management effectiveness. Construction Management & Economics, 14(4), 281-293.Fahmi, I. (2013). Perilaku Organisasi. Teori, Aplikasi Dan Kasus. Bandung: Alfabeta.Fanani, Z. (2008). Pengaruh Struktur Audit, Konflik Peran dan Ketidakjelasan Peran Terhadap Kinerja Auditor. Jurnal Akuntansi dan Keuangan Indonesia Vol. 5 (2)Fitzgerald, L.F., Hulin, C.L., & Drasgow. F. (1994). The antecendent and consequence of sexual harrasment in organization. An integrated model. In G.P.Keita & J.J.Hurrell, Jr. (Eds). Job stress in a changing workforce (pp.55-73). American Psychological Association. Washington , DCGriffin, R.W., & Moorhead, G. (2010). Organizatonal Behavior: Managing People and Organizations. 9th ed. Singapore: Cengage LearningHersey, P., & Blanchard, K.H. (1993). Management of organizational behavior: Untilizing human resource. 6th ed.Englewood Cliffs, NJ,US : Prentice-Hall, IncHo, W., Ching, S.C., Shih, Y., & Liang, R. (2009). Effects of job rotation and role stress among nurses on job satisfaction and organizational commitment. BMC Health Services Research, Vol. 9 (8), pp. 1-10Jackson, S.E., & Schuler, R.S. (1985). A Metaanalysis and Conceptual Critique of Research on Role Ambiguity and Role Conflict in Work Settings. Organizational Behavior and Human Decision Processes, Vol. 36, pp. 16-78.Karlsson, M. L., Björklund, C., & Jensen, I. (2010). The effects of psychosocial work factors on production loss, and the mediating effect of employee health. Journal of Occupational and Environmental Medicine, 52(3), 310-317.Kreitner, R., & Kinicki, A (2014). Organizational Behavior. USA : Mc Graw Hill Education.Lin, Y.-W. (2012). The causes, consequences, and mediating effects of job burnout among hospital employees in Taiwan. Journal of Hospital Administration, 2(1), p15.Lu, J. L. (2013). Organizational role stress indices affecting burnout among nurses. Journal of International Women's studies, 9(3), 63-78.Mishra, R., & Shukla, A. (2012). Impact of creativity on role Stressors, Job Satisfaction and organisational commitment. Journal of Organisation and Human Behaviour, 1(3), 18.Moumtzoglou, A. (2010). The Greek nurses’ job satisfaction scale: development and psychometric assessment, Journal of Nursing Measurement, Vol. 18 (1), pp. 60-69.Mulki, J. P., Jaramillo, J. F., & Locander, W. B. (2009). Critical role of leadership on ethical climate and sales person behaviors. Journal of Business Ethics, 86(2), 125-141.Netemeyer, R. G., Brashear-Alejandro, T., & Boles, J. S. (2004). A cross-national model of job-related outcomes of work role and family role variables: A retail sales context. Journal of the Academy of marketing Science, 32(1), 49-60.Novriansa, A.,& Sugiyanto, B.R.L. (2016). Role conflict and role ambiguity on local government internal auditors: The determinant and impacts. Journal of Indonesian Economy and Business. Vol 31 (1), 63 – 80Nugroho, M.K. (2012). Pengaruh stress peran dan kepuasan kerja terhadap komitmen organisasi perawat Di RSPI Sulianti Saroso. (Tesis yang tidak dipublikasikan). Universitas Indonesia, Indonesia.Rizwan, M., Waseem, A., & Bukhari, S.A. (2014). Antecedents of Job Stress and its impact on Job Performance and Job Satisfaction. International Journal of Learning & Development, Vol. 4 (2)Robbins, S.P (2002). Perilaku Organisasi. Ed. 8. Jakarta: PT. PrenhallindoRobbins, S.P., & Judge, T.A. (2017). Organizational Behavior. 16th ed.,USA : PearsonRodell, J. B., & Judge, T. A. (2009). Can “good” stressors spark “bad” behaviors? The mediating role of emotions in links of challenge and hindrance stressors with citizenship and counterproductive behaviors. Journal of Applied Psychology, 94(6), 1438.Sai, M. L. (2014). An investigation on factors of work stress influence job performance: Moderating social support. Universiti Utara Malaysia.Savage, E.B. (1998). An examination of the changes in the profesional role of the Nurse ouside IrelandSolimun,. Fernandes, A.A.R., &Nurjannah. (2017). Model Statistika Multivariat: Pemodelan Persamaan Struktural (SEM) Pendekatan WarpPLS. Malang: UB PressSpector, P.E. (1997). Job Satisfaction. USA : SAGE Publication, Inc.Suwarto. (2010). Perilaku Keorganisasian. Yogyakarta: Universitas Atma JayaTang, Y.-T., & Chang, C.-H. (2010). Impact of role ambiguity and role conflict on employee Creativity. African Journal of Business Management. Vol. 4 (6), pp. 869-881.Wakefield, A., Spilsbury, K., Atkin, K., McKenna, H., Borglin, G., & Stuttard, L. (2009). Assistant or substitute: exploring the fit between national policy vision and local practice realities of assistant practitioner job descriptions. Health Policy, 90(2), 286-295.Wu, L., & Norman, I.J. (2005) An Investigation of Job Satisfaction, Organizational Commitment and Role Conflict and Ambiguity in a sample of Chinese undergraduate nursing student. Nurse Education Today, Article in Press. Retrieved from Ovid database

IntroductionIn this article, I set out to accomplish two tasks. The first is to map coffee and cafés in Mainland China in different historical periods. The second is to focus on coffee and cafés in the socio-cultural milieu of contemporary China in order to understand the symbolic value of the emerging coffee/café-scape. Cafés, rather than coffee, are at the centre of this current trend in contemporary Chinese cities. With instant coffee dominating as a drink, the Chinese have developed a cultural and social demand for cafés, but have not yet developed coffee palates. Historical Coffee Map In 1901, coffee was served in a restaurant in the city of Tianjin. This restaurant, named Kiessling, was run by a German chef, a former solider who came to China with the eight-nation alliance. At that time, coffee was reserved mostly for foreign politicians and military officials as well as wealthy businessmen—very few ordinary Chinese drank it. (For more history of Kiessling, including pictures and videos, see Kiessling). Another group of coffee consumers were from the cultural elites—the young revolutionary intellectuals and writers with overseas experience. It was almost a fashion among the literary elite to spend time in cafés. However, this was negatively judged as “Western” and “bourgeois.” For example, in 1932, Lu Xun, one of the most important twentieth century Chinese writers, commented on the café fashion during 1920s (133-36), and listed the reasons why he would not visit one. He did not drink coffee because it was “foreigners’ food”, and he was too busy writing for the kind of leisure enjoyed in cafés. Moreover, he did not, he wrote, have the nerve to go to a café, and particularly not the Revolutionary Café that was popular among cultural celebrities at that time. He claimed that the “paradise” of the café was for genius, and for handsome revolutionary writers (who he described as having red lips and white teeth, whereas his teeth were yellow). His final complaint was that even if he went to the Revolutionary Café, he would hesitate going in (Lu Xun 133-36). From Lu Xun’s list, we can recognise his nationalism and resistance to what were identified as Western foods and lifestyles. It is easy to also feel his dissatisfaction with those dilettante revolutionary intellectuals who spent time in cafés, talking and enjoying Western food, rather than working. In contrast to Lu Xun’s resistance to coffee and café culture, another well-known writer, Zhang Ailing, frequented cafés when she lived in Shanghai from the 1920s to 1950s. She wrote about the smell of cakes and bread sold in Kiessling’s branch store located right next to her parents’ house (Yuyue). Born into a wealthy family, exposed to Western culture and food at a very young age, Zhang Ailing liked to spend her social and writing time in cafés, ordering her favourite cakes, hot chocolate, and coffee. When she left Shanghai and immigrated to the USA, coffee was an important part of her writing life: the smell and taste reminding her of old friends and Shanghai (Chunzi). However, during Zhang’s time, it was still a privileged and elite practice to patronise a café when these were located in foreign settlements with foreign chefs, and served mainly foreigners, wealthy businessmen, and cultural celebrities. After 1949, when the Chinese Communist Party established the People’s Republic of China, until the late 1970s, there were no coffee shops in Mainland China. It was only when Deng Xiaoping suggested neo-liberalism as a so-called “reform-and-open-up” economic policy that foreign commerce and products were again seen in China. In 1988, ten years after the implementation of Deng Xiaoping’s policy, the Nestlé coffee company made the first inroads into the mainland market, featuring homegrown coffee beans in Yunnan province (China Beverage News; Dong; ITC). Nestlé’s bottled instant coffee found its way into the Chinese market, avoiding a direct challenge to the tea culture. Nestlé packaged its coffee to resemble health food products and marketed it as a holiday gift suitable for friends and relatives. As a symbol of modernity and “the West”, coffee-as-gift meshed with the traditional Chinese cultural custom that values gift giving. It also satisfied a collective desire for foreign products (and contact with foreign cultures) during the economic reform era. Even today, with its competitively low price, instant coffee dominates coffee consumption at home, in the workplace, and on Chinese airlines. While Nestlé aimed their product at native Chinese consumers, the multinational companies who later entered China’s coffee market, such as Sara Lee, mainly targeted international hotels such as IHG, Marriott, and Hyatt. The multinationals also favoured coffee shops like Kommune in Shanghai that offered more sophisticated kinds of coffee to foreign consumers and China’s upper class (Byers). If Nestlé introduced coffee to ordinary Chinese families, it was Starbucks who introduced the coffee-based “third space” to urban life in contemporary China on a signficant scale. Differing from the cafés before 1949, Starbucks stores are accessible to ordinary Chinese citizens. The first in Mainland China opened in Beijing’s China World Trade Center in January 1999, targeting mainly white-collar workers and foreigners. Starbucks coffee shops provide a space for informal business meetings, chatting with friends, and relaxing and, with its 500th store opened in 2011, dominate the field in China. Starbucks are located mainly in the central business districts and airports, and the company plans to have 1,500 sites by 2015 (Starbucks). Despite this massive presence, Starbucks constitutes only part of the café-scape in contemporary Chinese cities. There are two other kinds of cafés. One type is usually located in universities or residential areas and is frequented mainly by students or locals working in cultural professions. A representative of this kind is Sculpting in Time Café. In November 1997, two years before the opening of the first Starbucks in Beijing, two newlywed college graduates opened the first small Sculpting in Time Café near Beijing University’s East Gate. This has been expanded into a chain, and boasts 18 branches on the Mainland. (For more about its history, see Sculpting in Time Café). Interestingly, both Starbucks and Sculpting in Time Café acquired their names from literature, Starbucks from Moby Dick, and Sculpting in Time from the Russian filmmaker Andrei Tarkovsky’s film diary of the same name. For Chinese students of literature and the arts, drinking coffee is less about acquiring more energy to accomplish their work, and more about entering a sensual world, where the aroma of coffee mixes with the sounds from the coffee machine and music, as well as the lighting of the space. More importantly, cafés with this ambience become, in themselves, cultural sites associated with literature, films, and music. Owners of this kind of café are often lovers of foreign literatures, films, and cultures, and their cafés host various cultural events, including forums, book clubs, movie screenings, and music clubs. Generally speaking, coffee served in this kind of café is simpler than in the kind discussed below. This third type of café includes those located in tourist and entertainment sites such as art districts, bar areas, and historical sites, and which are frequented by foreign and native tourists, artists and other cultural workers. If Starbucks cultivates a fast-paced business/professional atmosphere, and Sculpting in Time Cafés an artsy and literary atmosphere, this third kind of café is more like an upscale “bar” with trained baristas serving complicated coffees and emphasising their flavour. These coffee shops are more expensive than the other kinds, with an average price three times that of Starbucks. Currently, cafés of this type are found only in “first-tier” cities and usually located in art districts and tourist areas—such as Beijing’s 798 Art District and Nanluo Guxiang, Shanghai’s Tai Kang Road (a.k.a. “the art street”), and Hangzhou’s Westlake area. While Nestlé and Starbucks use coffee beans grown in Yunnan provinces, these “art cafés” are more inclined to use imported coffee beans from suppliers like Sara Lee. Coffee and Cafés in Contemporary China After just ten years, there are hundreds of cafés in Chinese cities. Why has there been such a demand for coffee or, more accurately, cafés, in such a short period of time? The first reason is the lack of “third space” environments in Mainland China. Before cafés appeared in the late 1990s, stores like KFC (which opened its first store in 1987) and McDonald’s (with its first store opened in 1990) filled this role for urban residents, providing locations where customers could experience Western food, meet friends, work, or read. In fact, KFC and McDonald’s were once very popular with college students looking for a place to study. Both stores had relatively clean food environments and good lighting. They also had air conditioning in the summer and heating in the winter, which are not provided in most Chinese university dormitories. However, since neither chain was set up to be a café and customers occupying seats for long periods while ordering minimal amounts of food or drink affected profits, staff members began to indirectly ask customers to leave after dining. At the same time, as more people were able to afford to eat at KFC and McDonald’s, their fast foods were also becoming more and more popular, especially among young people. As a consequence, both types of chain restaurant were becoming noisy and crowded and, thus, no longer ideal for reading, studying, or meeting with friends. Although tea has been a traditional drink in Chinese culture, traditional teahouses were expensive places more suitable for business meetings or for the cultural or intellectual elite. Since almost every family owns a tea set and can readily purchase tea, friends and family would usually make and consume tea at home. In recent years, however, new kinds of teahouses have emerged, similar in style to cafés, targeting the younger generation with more affordable prices and a wider range of choices, so the lack of a “third space” does not fully explain the café boom. Another factor affecting the popularity of cafés has been the development and uptake of Internet technology, including the increasing use of laptops and wireless Internet in recent years. The Internet has been available in China since the late 1990s, while computers and then laptops entered ordinary Chinese homes in the early twenty-first century. The IT industry has created not only a new field of research and production, but has also fostered new professions and demands. Particularly, in recent years in Mainland China, a new socially acceptable profession—freelancing in such areas as graphic design, photography, writing, film, music, and the fashion industry—has emerged. Most freelancers’ work is computer- and Internet-based. Cafés provide suitable working space, with wireless service, and the bonus of coffee that is, first of all, somatically stimulating. In addition, the emergence of the creative and cultural industries (which are supported by the Chinese government) has created work for these freelancers and, arguably, an increasing demand for café-based third spaces where such people can meet, talk and work. Furthermore, the flourishing of cafés in first-tier cities is part of the “aesthetic economy” (Lloyd 24) that caters to the making and selling of lifestyle experience. Alongside foreign restaurants, bars, galleries, and design firms, cafés contribute to city branding, and link a city to the global urban network. Cafés, like restaurants, galleries and bars, provide a space for the flow of global commodities, as well as for the human flow of tourists, travelling artists, freelancers, and cultural specialists. Finally, cafés provide a type of service that contributes to friendly owner/waiter-customer relations. During the planned-economy era, most stores and hotels in China were State-owned, staff salaries were not related to individual performance, and indifferent (and even unfriendly) service was common. During the economic reform era, privately owned stores and shops began to replace State-owned ones. At the same time, a large number of people from the countryside flowed into the cities seeking opportunities. Most had little if any professional training and so could only find work in factories or in the service industry. However, most café employees are urban, with better educational backgrounds, and many were already familiar with coffee culture. In addition, café owners, particularly those of places like Sculpting in Time Cafe, often invest in creating a positive, community atmosphere, learning about their customers and sharing personal experiences with their regular clients. This leads to my next point—the generation of the 1980s’ need for a social community. Cafés’ Symbolic Value—Community A demand for a sense of community among the generation of the 1980s is a unique socio-cultural phenomenon in China, which paradoxically co-exists with their desire for individualism. Mao Zedong started the “One Child Policy” in 1979 to slow the rapid population growth in China, and the generations born under this policy are often called “the lonely generations,” with both parents working full-time. At the same time, they are “the generation of me,” labelled as spoiled, self-centred, and obsessed with consumption (de Kloet; Liu; Rofel; Wang). The individuals of this generation, now aged in their 20s and 30s, constitute the primary consumers of coffee in China. Whereas individualism is an important value to them, a sense of community is also desirable in order to compensate for their lack of siblings. Furthermore, the 1980s’ generation has also benefitted from the university expansion policy implemented in 1999. Since then, China has witnessed a surge of university students and graduates who not only received scientific and other course-based knowledge, but also had a better chance to be exposed to foreign cultures through their books, music, and movies. With this interesting tension between individualism and collectivism, the atmosphere provided by cafés has fostered a series of curious temporary communities built on cultural and culinary taste. Interestingly, it has become an aspiration of many young college students and graduates to open a community-space style café in a city. One of the best examples is the new Henduoren’s (Many People’s) Café. This was a project initiated by Wen Erniu, a recent college graduate who wanted to open a café in Beijing but did not have sufficient funds to do so. She posted a message on the Internet, asking people to invest a minimum of US$316 to open a café with her. With 78 investors, the café opened in September 2011 in Beijing (see pictures of Henduoren’s Café). In an interview with the China Daily, Wen Erniu stated that, “To open a cafe was a dream of mine, but I could not afford it […] We thought opening a cafe might be many people’s dream […] and we could get together via the Internet to make it come true” (quoted in Liu 2011). Conclusion: Café Culture and (Instant) Coffee in China There is a Chinese saying that, if you hate someone—just persuade him or her to open a coffee shop. Since cafés provide spaces where one can spend a relatively long time for little financial outlay, owners have to increase prices to cover their expenses. This can result in fewer customers. In retaliation, cafés—particularly those with cultural and literary ambience—host cultural events to attract people, and/or they offer food and wine along with coffee. The high prices, however, remain. In fact, the average price of coffee in China is often higher than in Europe and North America. For example, a medium Starbucks’ caffè latte in China averaged around US$4.40 in 2010, according to the price list of a Starbucks outlet in Shanghai—and the prices has recently increased again (Xinhua 2012). This partially explains why instant coffee is still so popular in China. A bag of instant Nestlé coffee cost only some US$0.25 in a Beijing supermarket in 2010, and requires only hot water, which is accessible free almost everywhere in China, in any restaurant, office building, or household. As an habitual, addictive treat, however, coffee has not yet become a customary, let alone necessary, drink for most Chinese. Moreover, while many, especially those of the older generations, could discern the quality and varieties of tea, very few can judge the quality of the coffee served in cafés. As a result, few Mainland Chinese coffee consumers have a purely somatic demand for coffee—craving its smell or taste—and the highly sweetened and creamed instant coffee offered by companies like Nestlé or Maxwell has largely shaped the current Chinese palate for coffee. Ben Highmore has proposed that “food spaces (shops, restaurants and so on) can be seen, for some social agents, as a potential space where new ‘not-me’ worlds are encountered” (396) He continues to expand that “how these potential spaces are negotiated—the various affective registers of experience (joy, aggression, fear)—reflect the multicultural shapes of a culture (its racism, its openness, its acceptance of difference)” (396). Cafés in contemporary China provide spaces where one encounters and constructs new “not-me” worlds, and more importantly, new “with-me” worlds. While café-going communicates an appreciation and desire for new lifestyles and new selves, it can be hoped that in the near future, coffee will also be appreciated for its smell, taste, and other benefits. Of course, it is also necessary that future Chinese coffee consumers also recognise the rich and complex cultural, political, and social issues behind the coffee economy in the era of globalisation. References Byers, Paul [former Managing Director, Sara Lee’s Asia Pacific]. Pers. comm. Apr. 2012. China Beverage News. “Nestlé Acquires 70% Stake in Chinese Mineral Water Producer.” (2010). 31 Mar. 2012 ‹http://chinabevnews.wordpress.com/2010/02/21/nestle-acquires-70-stake-in-chinese-mineral-water-producer›. Chunzi. 张爱玲地图[The Map of Eileen Chang]. 汉语大词典出版 [Hanyu Dacidian Chubanshe], 2003. de Kloet, Jeroen. China with a Cut: Globalization, Urban Youth and Popular Music. Amsterdam: Amsterdam UP, 2010. Dong, Jonathan. “A Caffeinated Timeline: Developing Yunnan’s Coffee Cultivation.” China Brief (2011): 24-26. Highmore, Ben. “Alimentary Agents: Food, Cultural Theory and Multiculturalism.” Journal of Intercultural Studies, 29.4 (2008): 381-98. ITC (International Trade Center). The Coffee Sector in China: An Overview of Production, Trade And Consumption, 2010. Liu, Kang. Globalization and Cultural Trends in China. Honolulu: University of Hawai’i Press, 2004. Liu, Zhihu. “From Virtual to Reality.” China Daily (Dec. 2011) 31 Mar. 2012 ‹http://www.chinadaily.com.cn/life/2011-12/26/content_14326490.htm›. Lloyd, Richard. Neobohemia: Art and Commerce in the Postindustrial City. London: Routledge, 2006. Lu, Xun. “Geming Kafei Guan [Revolutionary Café]”. San Xian Ji. Taibei Shi: Feng Yun Shi Dai Chu Ban Gong Si: Fa Xing Suo Xue Wen Hua Gong Si, Mingguo 78 (1989): 133-36. Rofel, Lisa. Desiring China: Experiments in Neoliberalism, Sexuality, and Public Culture. Durham and London: Duke UP, 2007: 1-30. “Starbucks Celebrates Its 500th Store Opening in Mainland China.” Starbucks Newsroom (Oct. 2011) 31 Mar. 2012. ‹http://news.starbucks.com/article_display.cfm?article_id=580›. Wang, Jing. High Culture Fever: Politics, Aesthetics, and Ideology in Deng’s China. Berkeley, Los Angeles, London: U of California P, 1996. Xinhua. “Starbucks Raises Coffee Prices in China Stores.” Xinhua News (Jan. 2012). 31 Mar. 2012 ‹http://news.xinhuanet.com/english/china/2012-01/31/c_131384671.htm›. Yuyue. Ed. “On the History of the Western-Style Restaurants: Aileen Chang A Frequent Customer of Kiessling.” China.com.cn (2010). 31 Mar. 2012 ‹http://www.china.com.cn/culture/txt/2010-01/30/content_19334964.htm›.

Introdução: O novo coronavírus é responsável pela síndrome respiratória aguda grave, causando óbito, em 5 meses de pandemia, de 646 mil indivíduos mundialmente. As principais formas de transmissão identificadas são gotículas de saliva expelidas ao falar e tossir ou pelo contato em uma superfície com secreções salivares, com característica agressiva de contágio e potencial letalidade. Objetivo: Relatar as práticas do serviço radiológico em tempos de pandemia e evidenciar práticas seguras de biossegurança para o Cirurgião-Dentista. Métodos: Para elaboração deste trabalho foram selecionados 13 artigos utilizando a base de dados do Pubmed. Foram utilizados como descritores “Coronavirus Infections”, “Betacoronavirus”, “Dentistry”, “Radiology” e “Containment of Biohazards. Os critérios de inclusão foram artigos publicados em inglês, espanhol e português com os resumos disponíveis, do ano de 2020. Resultados: Os Cirurgiões-Dentistas estão entre os profissionais que mais sofrem risco de contaminação, uma vez que estão expostos a riscos biológicos e contato direto com a saliva, sendo necessário, neste cenário crítico de pandemia do coronavírus, adotar medidas mais eficazes de prevenção e controle de infecção a fim de evitar ou reduzir ao máximo a transmissão deste vírus. Na Radiologia Odontológica, a baixa incidência de aerossóis não exclui a possibilidade de contaminação pelo contato com fluido salivar nas tomadas radiográficas intrabucais, preconizando radiografias extrabucais. Conclusão: A presente revisão de literatura é baseada em relevantes diretrizes e pesquisas, introduzindo conhecimentos essenciais sobre o coronavírus, condutas a serem adotadas em ambiente odontológico e fornece protocolos de orientações recomendadas para dentistas e estudantes.Descritores: Infecções por Coronavirus; Betacoronavirus; Odontologia; Radiologia; Contenção de Riscos Biológicos.ReferênciasOrganização Mundial da Saúde (OMS). Coronavirus disease (COVID-19) pandemic. 2020. Disponível: https://www.who.int/emergencies/diseases/novel-coronavirus-2019Zhu HD, Zeng CH, Lu J, Teng GJ. COVID-19: What should interventional radiologists know and what can they do? J Vasc Interv Radiol. 2020; 31(6):876-81.Odeh ND, Babkair H, Abu-Hammad S, Borzangy S, Abu-Hammad A, Abu-Hammad O. COVID-19: present and future challenges for dental practice. Int J Environ Res Public Health. 2020; 17(9):3151.Conselho Federal de Odontologia (CFO). Manual de Boas Práticas em Biossegurança para Ambientes Odontológicos. 2020. Disponível em: http://website.cfo.org.br/wp-content/uploads/2020/04/cfo-lanc%CC%A7a-Manual-de-Boas-Pra%CC%81ticas-em-Biosseguranc%CC%A7a-para-Ambientes-Odontologicos.pdfSalzedas LMP, Oliva AH, Coclete GEG, Coclete GA. Protocolo de biossegurança e gerenciamento de resíduos no ensino de radiologia odontológica da Faculdade de Odontologia de Araçatuba-UNESP. Arch Healt Invest. 2014;3(6):20-27.Peng X, Xu X, Li Y, Cheng L, Zhou X, Ren B. Transmission routes of 2019-nCoV and controls in dental practice. Int J Oral Sci. 2020;12(1):9.Fini MB. What dentists need to know about COVID-19. Oral Oncol. 2020;105:104741.Société Française de Stomatologie, Chirurgie Maxillo-Faciale et Chirurgie Orale (SFSCMFCO). Praticiens de la cavité orale. Recommandations professionnelles. Risques infectieux par le COVID-19. Faire front pour faire face. J Stomatol Oral Maxillofac Surg. 2020;121(2):e3-6.Han P, Ivanovski S. Saliva – friend and foe in the COVID-19 outbreak. Diagnostics (Basel). 2020;10:290.Dziedzic A, Wojtyczka R. The impact of coronavírus infectious disease 19 (COVID-19) on oral health. Oral Dis. 2020;101111Wu R, Wang L, Kuo HCD, Shannar A, Peter P, Chuo PJ, Li S, Hudlikar, Liu X, Liu Z, Poiani, Amorosa L, Brunetti L, Kong AN. An update on current therapeutic drugs treating COVID-19. Curr Pharmacol Rep. 2020;11:1-15.Van Doremalen N, Bushmaker T, Morris DH, Holbrook MG, Gamble A, Williamson BN, Tamin A, Harcourt JL, Thornburg NJ, Gerber SI, Lloyd-Smith JO, Wit E, Munster VJ. Aerosol and surface stability of SARS-CoV-2 as compared with SARS-CoV-1. N Engl J Med. 2020;382(16):1564-67.American Dental Association (ADA). What Constitutes a Dental Emergency? 2020. Disponível: https://success.ada.org/~/media/CPS/Files/Open%20Files/ADA_COVID19_Dental_Emergency_DDS.pdf?_ga=2.253879752.110187285.1584496315-1622146531.1565271894Center for Disease Control and Prevention (CDC). Interim Infection Prevention and Control for Patients with Suspected or Confirmed Coronavirus disease 2019 (COVID-19) in Healthcare Settings. 2020. Disponível em: https://www.cdc.gov/coronavirus/2019-ncov/hcp/dental-settings.htmlPeditto M, Scapellato S, Marcianò A, Costa P, Oteri G. Dentistry during the COVID-19 epidemic: an italian workflow for the management of dental practice. Int J Environ Res Public Health. 2020;17(9):3325.Tuñas ITC, Silva ET, Santiago SBS, Maia KD, Silva-Júnior GO. Doença pelo Coronavírus 2019 (COVID-19): Uma abordagem preventiva para Odontologia. Rev Bras Odontol. 2020;77(1):1-6.Salzedas LMP, Oliva AH, Oliveira LQC, Simas MCO, Coclete GA. Biossegurança na clínica de radiologia odontológica. Arch Health Invest. 2014;3(6):6-13.Escola de Educação Permanente do Hospital das Clínicas da USP (HC). COVID-19: dicas e cuidados para enfrentar a pandemia. 2020. Disponível em: https://jornal.usp.br/wp-content/uploads/2020/05/e-book-covid-19.pdfSaki M, Haseli S, Iranpour P. Oral radiology center as a potential source of COVID-19 transmission; Points to consider. Acad Radiol. 2020;27(7):1047-48.Yu J, Ding N, Liu XJ, He WJ, Dai WC, Zhou ZG et al. Infection control against COVID-19 in departments of radiology. Acad Radiol. 2020;27(5):614-17.