Relevant bibliographies by topics / Tilt casting

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Conference papers

Academic literature on the topic 'Tilt casting'

Author: Grafiati
Published: 4 June 2021
Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tilt casting.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Tilt casting"

1

Mi, J., R. A. Harding, and J. Campbell. "The tilt casting process." International Journal of Cast Metals Research 14, no. 6 (2002): 325–34. http://dx.doi.org/10.1080/13640461.2002.11819450.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Ye, Shi Ping Wu, Xiang Xue, and Jing Jie Guo. "Optimization of Tilt-Casting of Aluminum Alloy Automobile Drain Pipes through Numerical Simulation." Materials Science Forum 762 (July 2013): 633–38. http://dx.doi.org/10.4028/www.scientific.net/msf.762.633.

Full text
Abstract:
The effect of major parameters, such as pouring temperature, tilt time and preheating temperature of mold, on the tilt casting of aluminum alloy automobile drain pipes is studied through numerical simulation using single factor and orthogonal test methods. The simulation results of single factor test indicate that the increase in the pouring temperature and mold preheating temperature could effectively reduce the shrinkage tendency and the shortage of tilt time would cause lower temperature gradient of casting at the beginning of solidification, thus would lead the extension of solidification
APA, Harvard, Vancouver, ISO, and other styles
3

Ransing, R. S., S. Savino, and R. W. Lewis. "Numerical optimisation of tilt casting process." International Journal of Cast Metals Research 18, no. 2 (2005): 109–18. http://dx.doi.org/10.1179/136404605225022901.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Pease, Leonard F., Jie Bao, Ramuel Safarkoolan, et al. "Flow Obstacles Minimize Surface Turbulence in Tilt Casting." Chemical Engineering Science 230 (February 2021): 116104. http://dx.doi.org/10.1016/j.ces.2020.116104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, H., G. Djambazov, K. Pericleous, R. A. Harding та M. Wickins. "Numerical modelling of tilt casting process forγ-TiAl alloys". International Journal of Cast Metals Research 25, № 2 (2012): 65–74. http://dx.doi.org/10.1179/1743133611y.0000000024.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kim, S. B., K. D. Yeom, and C. P. Hong. "Simulation of mould filling sequences in gravity tilt-pour casting." International Journal of Cast Metals Research 10, no. 1 (1997): 49–56. http://dx.doi.org/10.1080/13640461.1997.11819219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yokoyama, Yoshihiko, D. Gary Harlow, Peter K. Liaw, and Akihisa Inoue. "Comparison of Fatigue Strengths of Bulk Metallic Glasses Produced by Tilt Casting and High-Pressure Casting." Metallurgical and Materials Transactions A 41, no. 7 (2010): 1780–86. http://dx.doi.org/10.1007/s11661-010-0218-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yamamoto, Tokujiro, Yoshihiko Yokoyama, Tetsu Ichitsubo, Hisamichi Kimura, Eiichiro Matsubara, and Akihisa Inoue. "Precipitation of the ZrCu B2 phase in Zr50Cu50–xAlx (x = 0, 4, 6) metallic glasses by rapidly heating and cooling." Journal of Materials Research 25, no. 4 (2010): 793–800. http://dx.doi.org/10.1557/jmr.2010.0105.

Full text
Abstract:
Precipitation of ZrCu with the B2 structure in Zr50Cu50–xAlx (x = 0, 4, 6) metallic glasses by rapidly heating and cooling was investigated. By rapidly heating and cooling, the ZrCu B2 phase precipitates the most in Zr50Cu46Al4 metallic glass plates prepared by tilt-casting without using a silica nozzle. The amount of the ZrCu B2 phase precipitated in Zr50Cu46Al4 metallic glass ribbons prepared by using a silica nozzle decreases by Si diffused from the silica nozzle during the preparation. This work is discussed from the viewpoint of crystallization behavior and why larger Zr-based bulk metall
APA, Harvard, Vancouver, ISO, and other styles
9

Noda, Yoshiyuki, and Tadashi Nishida. "Precision Analysis of Automatic Pouring Machines for the Casting Industry." International Journal of Automation Technology 2, no. 4 (2008): 241–46. http://dx.doi.org/10.20965/ijat.2008.p0241.

Full text
Abstract:
This paper concerns automation of pouring process in casting industry. Recently, automatic pouring machines are used in casting with greensand mold. There are various types of automatic pouring machines such as a ladle-tilt type, stopper type, pressure type and so on. In this paper, we focus on the automation technology to the ladle-tilt type automatic pouring machines which have been widely used in East Asian. The pouring process requires the molten metal is poured quickly and precisely into the mold and is not spilled over the sprue cup. Therefore, the precision of pouring control in current
APA, Harvard, Vancouver, ISO, and other styles
10

Liang, Zhi, Jiashi Miao, Anil K. Sachdev, James C. Williams, and Alan A. Luo. "Titanium alloy design and casting process development using an Integrated Computational Materials Engineering (ICME) approach." MATEC Web of Conferences 321 (2020): 10013. http://dx.doi.org/10.1051/matecconf/202032110013.

Full text
Abstract:
The application of titanium components is generally limited by their high raw material and manufacturing costs. In this paper, a lower cost cast titanium alloy based on the Ti-Al-Fe system has been designed using an ICME approach. The new alloy Ti-6Al-5Fe-0.05B-0.05C (all wt.%) significantly reduces raw material cost and demonstrates improved castability compared with the baseline Ti-6Al-4V alloy. The fine primary and secondary α phase microstructure in the new alloy, due to Fe partitioning, provides exceptionally high strength (1023 MPa yield strength and 1136 MPa ultimate tensile strength) a
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Tilt casting"

1

Wang, Hong. "Numerical modelling of the tilt casting processes of titanium alumindes." Thesis, University of Greenwich, 2008. http://gala.gre.ac.uk/6336/.

Full text
Abstract:
This research has investigated the modelling and optimisation of the tilt casting process of Titanium Aluminides (TiAl). This study is carried out in parallel with the experimental research undertaken in IRC at the University of Birmingham. They propose to use tilt casting inside a vacuum chamber and attempt to combine this tilt casting process with Induction Skull Melting (ISM). A totally novel process is developing for investment casting, which is suitable for casting gamma TiAl. As it is known, gamma TiAl alloys has great properties including low density, high specific yield strength, high
APA, Harvard, Vancouver, ISO, and other styles
2

Olofsson, Anders. "Hardening Distortions of Serial Produced Gears." Licentiate thesis, KTH, Skolan för industriell teknik och management (ITM), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-207087.

Full text
Abstract:
Hardening distortions are unwanted changes in shape and dimension that arise during hardening of steel components. Uncontrolled distortions induce random errors to the manufacturing process, and have a strong negative impact on manufacturing costs. The distortions are not only caused by the hardening process, several factors from previous manufacturing steps including the component geometry itself contribute to varying extent. The aim of the current work is to investigate the main influencing factors on hardening distortions for serial produced gears. The investigations were done on two differ
APA, Harvard, Vancouver, ISO, and other styles
3

Otremba, Maik. "Standardisierungsaspekte bei der Gießtechnologieauswahl von Zylinderköpfen." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2015. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-163862.

Full text
Abstract:
Für den Zylinderkopf ist das Schwerkraftgießen ein etabliertes Gießverfahren. Jedoch gehen die Gießereien in der Ausführung des Schwerkraftgusses unterschiedlich vor. Durch die mannigfaltigen Anschnittsysteme und die sich dadurch ergebenden Vor- bzw. Nachteile bei der Herstellung entstehen Unterschiede bei Qualität und Kosten. Ziel dieser Arbeit ist es, Standards und Vereinheitlichungen während der Produktentstehung eines Zylinderkopfes zu etablieren, um eine gleichbleibende Qualität der Zylinderköpfe in den Gießereien zu gewährleisten. Dazu sind vielfältige Ansatzpunkte zu verfolgen. Eine Mö
APA, Harvard, Vancouver, ISO, and other styles
4

Olson, Petter. "Vad krävs för en halverad energianvändning i Sveriges bebyggelse till år 2050? : En backcasting studie med sex scenarion för en hållbar energianvändning i den svenska bostads- och servicesektorn." Thesis, KTH, Industriell ekologi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-210732.

Full text
Abstract:
I Sverige står bostads- och servicesektorn för ca 40 procent av den totala energianvändningen. Riksdagen hade fram till år 2012 ett specifikt mål om att halvera energianvändningen i sektorn till år 2050. I väntan på att ett nytt mål antas skrivs att innebörden för målet kvarstår. Till 2050 ska energianvändningen ha halverats. Denna rapport är en backcastingstudie som har som mål att analysera vad som krävs för att uppnå halveringsmålet genom satsning på fyra huvudåtgärder; nyproduktion, ombyggnad, stegvis förbättring och effektivare användning av bostadsbeståndet. Sex scenarion har satts upp,
APA, Harvard, Vancouver, ISO, and other styles
5

LIN, GUAN-YI, and 林冠億. "Application of CAE in Aluminum Alloy Tilt Gravity Casting." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/h89y4x.

Full text
Abstract:
碩士<br>逢甲大學<br>機械與電腦輔助工程學系<br>106<br>The objective of this research is to evaluate the effectiveness of gating design and misrun problem caused by back pressure of the A356 aluminum alloy tilt gravity casting vent using the foundry CAE software, ProCAST. The metallographic microstructure and hardness variation of A356 aluminum alloy casting through melt treatment to heat treatment are also evaluated. The simulation result shown that unpressurized gating system with gating ratio of “1:1.7:3.52” has a lower flow speed than “1:1.7:1.13”. Flow speed decreased about 18%. The molten aluminum flow ge
APA, Harvard, Vancouver, ISO, and other styles
6

Otremba, Maik. "Standardisierungsaspekte bei der Gießtechnologieauswahl von Zylinderköpfen." Doctoral thesis, 2014. https://tubaf.qucosa.de/id/qucosa%3A22978.

Full text
Abstract:
Für den Zylinderkopf ist das Schwerkraftgießen ein etabliertes Gießverfahren. Jedoch gehen die Gießereien in der Ausführung des Schwerkraftgusses unterschiedlich vor. Durch die mannigfaltigen Anschnittsysteme und die sich dadurch ergebenden Vor- bzw. Nachteile bei der Herstellung entstehen Unterschiede bei Qualität und Kosten. Ziel dieser Arbeit ist es, Standards und Vereinheitlichungen während der Produktentstehung eines Zylinderkopfes zu etablieren, um eine gleichbleibende Qualität der Zylinderköpfe in den Gießereien zu gewährleisten. Dazu sind vielfältige Ansatzpunkte zu verfolgen. Eine Mö
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Tilt casting"

1

The Art of Handmade Tile: Complete Instructions for Carving, Casting & Glazing. kp books, 2002.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Tilt casting"

1

Avinash, C., S. Ramaswamy, S. Raguraman, and N. Muthukrishnan. "An Investigation on Effect of Workpiece Reinforcement Percentage on Tool Wear in Cutting Al-SiC Metal Matrix Composites." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-41231.

Full text
Abstract:
The tool wear mechanism in machining of metal matrix composites (MMC) and its dependence on the percentage of reinforcements with MMC was investigated. Silicon carbide metal matrix composites of two samples were prepared by using stir casting method. Samples having 10 percentage &amp; 20 percentage of silicon carbide particles (grain size ranging from 55 to 85 micron meter) by weight were fabricated in the form of cylindrical bars. Experiments were conducted in medium duty lathe by using poly crystalline diamond (PCD) insert of 1500 grade as cutting insert and the experiment was performed by u
APA, Harvard, Vancouver, ISO, and other styles
2

Ealy, Brandon, Luisana Calderon, Wenping Wang, et al. "Characterization of LAM-Fabricated Porous Superalloys for Turbine Components." In ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-58080.

Full text
Abstract:
The limits of gas turbine technology are heavily influenced by materials and manufacturing capabilities. Inconel alloys remain the material of choice for most hot gas path components in gas turbines, however recent increases in turbine inlet temperature (TIT) are associated with the development of advanced convective cooling methods and ceramic thermal barrier coatings (TBC). Increasing cycle efficiency and cycle specific work are the primary drivers for increasing TIT. Lately, incremental performance gains responsible for increasing the allowable TIT have been made mainly through innovations
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Tilt casting' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography