Log in

Relevant bibliographies by topics / Tilt casting / Journal articles

To see the other types of publications on this topic, follow the link: Tilt casting.

Journal articles on the topic 'Tilt casting'

Author: Grafiati

Published: 4 June 2021

Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Tilt casting.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Mi, J., R. A. Harding, and J. Campbell. "The tilt casting process." International Journal of Cast Metals Research 14, no. 6 (2002): 325–34. http://dx.doi.org/10.1080/13640461.2002.11819450.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Wang, Ye, Shi Ping Wu, Xiang Xue, and Jing Jie Guo. "Optimization of Tilt-Casting of Aluminum Alloy Automobile Drain Pipes through Numerical Simulation." Materials Science Forum 762 (July 2013): 633–38. http://dx.doi.org/10.4028/www.scientific.net/msf.762.633.

Full text

Abstract:

The effect of major parameters, such as pouring temperature, tilt time and preheating temperature of mold, on the tilt casting of aluminum alloy automobile drain pipes is studied through numerical simulation using single factor and orthogonal test methods. The simulation results of single factor test indicate that the increase in the pouring temperature and mold preheating temperature could effectively reduce the shrinkage tendency and the shortage of tilt time would cause lower temperature gradient of casting at the beginning of solidification, thus would lead the extension of solidification

APA, Harvard, Vancouver, ISO, and other styles

3

Ransing, R. S., S. Savino, and R. W. Lewis. "Numerical optimisation of tilt casting process." International Journal of Cast Metals Research 18, no. 2 (2005): 109–18. http://dx.doi.org/10.1179/136404605225022901.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Pease, Leonard F., Jie Bao, Ramuel Safarkoolan, et al. "Flow Obstacles Minimize Surface Turbulence in Tilt Casting." Chemical Engineering Science 230 (February 2021): 116104. http://dx.doi.org/10.1016/j.ces.2020.116104.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wang, H., G. Djambazov, K. Pericleous, R. A. Harding та M. Wickins. "Numerical modelling of tilt casting process forγ-TiAl alloys". International Journal of Cast Metals Research 25, № 2 (2012): 65–74. http://dx.doi.org/10.1179/1743133611y.0000000024.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kim, S. B., K. D. Yeom, and C. P. Hong. "Simulation of mould filling sequences in gravity tilt-pour casting." International Journal of Cast Metals Research 10, no. 1 (1997): 49–56. http://dx.doi.org/10.1080/13640461.1997.11819219.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Yokoyama, Yoshihiko, D. Gary Harlow, Peter K. Liaw, and Akihisa Inoue. "Comparison of Fatigue Strengths of Bulk Metallic Glasses Produced by Tilt Casting and High-Pressure Casting." Metallurgical and Materials Transactions A 41, no. 7 (2010): 1780–86. http://dx.doi.org/10.1007/s11661-010-0218-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Yamamoto, Tokujiro, Yoshihiko Yokoyama, Tetsu Ichitsubo, Hisamichi Kimura, Eiichiro Matsubara, and Akihisa Inoue. "Precipitation of the ZrCu B2 phase in Zr50Cu50–xAlx (x = 0, 4, 6) metallic glasses by rapidly heating and cooling." Journal of Materials Research 25, no. 4 (2010): 793–800. http://dx.doi.org/10.1557/jmr.2010.0105.

Full text

Abstract:

Precipitation of ZrCu with the B2 structure in Zr50Cu50–xAlx (x = 0, 4, 6) metallic glasses by rapidly heating and cooling was investigated. By rapidly heating and cooling, the ZrCu B2 phase precipitates the most in Zr50Cu46Al4 metallic glass plates prepared by tilt-casting without using a silica nozzle. The amount of the ZrCu B2 phase precipitated in Zr50Cu46Al4 metallic glass ribbons prepared by using a silica nozzle decreases by Si diffused from the silica nozzle during the preparation. This work is discussed from the viewpoint of crystallization behavior and why larger Zr-based bulk metall

APA, Harvard, Vancouver, ISO, and other styles

9

Noda, Yoshiyuki, and Tadashi Nishida. "Precision Analysis of Automatic Pouring Machines for the Casting Industry." International Journal of Automation Technology 2, no. 4 (2008): 241–46. http://dx.doi.org/10.20965/ijat.2008.p0241.

Full text

Abstract:

This paper concerns automation of pouring process in casting industry. Recently, automatic pouring machines are used in casting with greensand mold. There are various types of automatic pouring machines such as a ladle-tilt type, stopper type, pressure type and so on. In this paper, we focus on the automation technology to the ladle-tilt type automatic pouring machines which have been widely used in East Asian. The pouring process requires the molten metal is poured quickly and precisely into the mold and is not spilled over the sprue cup. Therefore, the precision of pouring control in current

APA, Harvard, Vancouver, ISO, and other styles

10

Liang, Zhi, Jiashi Miao, Anil K. Sachdev, James C. Williams, and Alan A. Luo. "Titanium alloy design and casting process development using an Integrated Computational Materials Engineering (ICME) approach." MATEC Web of Conferences 321 (2020): 10013. http://dx.doi.org/10.1051/matecconf/202032110013.

Full text

Abstract:

The application of titanium components is generally limited by their high raw material and manufacturing costs. In this paper, a lower cost cast titanium alloy based on the Ti-Al-Fe system has been designed using an ICME approach. The new alloy Ti-6Al-5Fe-0.05B-0.05C (all wt.%) significantly reduces raw material cost and demonstrates improved castability compared with the baseline Ti-6Al-4V alloy. The fine primary and secondary α phase microstructure in the new alloy, due to Fe partitioning, provides exceptionally high strength (1023 MPa yield strength and 1136 MPa ultimate tensile strength) a

APA, Harvard, Vancouver, ISO, and other styles

11

Ciućka, T. "Influence of Vibrations During Crystallization on Mechanical Properties and Porosity of EN AC-AlSi17 Alloy." Archives of Foundry Engineering 13, no. 1 (2013): 5–18. http://dx.doi.org/10.2478/afe-2013-0001.

Full text

Abstract:

Abstract Today’s industry aims at such situation, where number of defective products, so called defects shall approach to zero. Therefore, one introduces a various changes in technology of production, introduces improvements which would help in accomplishment of this objective. Another important factor is introduction of different type of testing, which shall help in assessment which factor has significant effect on quantity of rejects, and which one could be neglected. Existence of casting rejects is unavoidable; therefore a new ideas, technologies and innovations are necessary in the entire

APA, Harvard, Vancouver, ISO, and other styles

12

Löw, Steffen, Marion Papay, and Christoph Eingartner. "Pain Perception following Initial Closed Reduction in the Preoperative Care of Unstable, Dorsally Displaced Distal Radius Fractures." Journal of Hand and Microsurgery 11, no. 02 (2019): 111–16. http://dx.doi.org/10.1055/s-0039-1688681.

Full text

Abstract:

Abstract Introduction Closed reduction and cast immobilization is a common practice as initial treatment for distal radius fractures. This study examines the pain perception that accompanies this approach. Materials and Methods Thirty dorsally displaced distal radius fractures were reduced and casted under finger-trap traction with intravenous analgesics. Patients rated their pain perception on visual analog scale prior to presentation, during reduction, during casting, and for every day until surgery. Closed reduction improved palmar tilt from −26.3 to −10.8 degrees. Surgery improved palmar t

APA, Harvard, Vancouver, ISO, and other styles

13

Wang, H., G. Djambazov, K. A. Pericleous, R. A. Harding, and M. Wickins. "Modelling the dynamics of the tilt-casting process and the effect of the mould design on the casting quality." Computers & Fluids 42, no. 1 (2011): 92–101. http://dx.doi.org/10.1016/j.compfluid.2010.11.010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Liu, Tao, Quan Bo Tang, and Jian Hua Zhao. "The Tendency of Oxide Inclusion on Magnesium Alloys Intake Manifold in Tilt Cast." Materials Science Forum 686 (June 2011): 367–70. http://dx.doi.org/10.4028/www.scientific.net/msf.686.367.

Full text

Abstract:

The oxide inclusion formation tendency in tilting cast magnesium alloys intake manifold was studied by numerical simulation. Two different programs were used for results comparison. The results indicate that it was easier to form oxide inclusion when connecting foundry ladle with the junction panel of intake manifold instead of cavity resonator. The oxidation mixture is prone to appear at the ribs and outer wall of the four main air piles of the intake manifold. The formation of oxide inclusion would be influenced by the flowing state of the melt during casting process.

APA, Harvard, Vancouver, ISO, and other styles

15

Chen, Yue Dong, and Zhen Hua Xia. "Simulation and Implementation for the Speed Control System of Horizontal Continuous Casting Dragger for Copper." Advanced Materials Research 383-390 (November 2011): 1696–700. http://dx.doi.org/10.4028/www.scientific.net/amr.383-390.1696.

Full text

Abstract:

The levels of continuous casting process of copper and copper alloy billet have many advantages, such as taking small footprint, low investment and the shorter flow. Recently, it develops very quickly all over the world. This article designs the dummy body drive control system based on the DSP digital signal processing chips, inverter and variable speed induction motor, and uses the unique process that space vector pulse width modulation strategy can achieve continuous casting horizontal tractor’s four beats to realize continuous casting process’ high-quality, stable and reliable implementatio

APA, Harvard, Vancouver, ISO, and other styles

16

Ashtari, P., G. Birsan, A. Khalaf, and S. Shankar. "Controlled Diffusion Solidification of 2024, 6082 and 7075 Al Alloys via Tilt-Pour Casting Process." International Journal of Metalcasting 5, no. 2 (2011): 43–64. http://dx.doi.org/10.1007/bf03355471.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Khaled, I. "Prediction of Shrinkage Porosity in Ti-46Al-8Nb Tilt-Casting Using the Niyama Criterion Function." International Journal of Metalcasting 7, no. 4 (2013): 35–42. http://dx.doi.org/10.1007/bf03355562.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Burke, Darren, and Peter Wenderoth. "Cyclopean Tilt Aftereffects Can Be Induced Monocularly: Is There a Purely Binocular Process?" Perception 18, no. 4 (1989): 471–82. http://dx.doi.org/10.1068/p180471.

Full text

Abstract:

A series of experiments have been reported by Wolfe and Held which they have taken as evidence for the existence of more than one binocular process in human vision, specifically a simple binocular process (OR-gate) and a purely binocular process (AND-gate). In one of their studies, it was shown that tilt aftereffects induced with cyclopean stimuli produced measurable effects only when testing was binocular, which suggested that cyclopean adaptation affects only the AND-gate mechanism. If the two alleged mechanisms (AND or OR) are independent, monocular adaptation with luminance contrast stimul

APA, Harvard, Vancouver, ISO, and other styles

19

Uemura, Sojiro, Takateru Yamamuro, Joung Wook Kim, Yasuhiro Morizono, Sadahiro Tsurekawa, and Kyosuke Yoshimi. "Quantitative Evaluation of Microstructure in Mo-Si-B-TiC Alloy Produced by Melting and Tilt Casting Method." Journal of the Japan Institute of Metals 80, no. 8 (2016): 529–38. http://dx.doi.org/10.2320/jinstmet.j2016010.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Uemura, Sojiro, Takateru Yamamuro, Joung Wook Kim, Yasuhiro Morizono, Sadahiro Tsurekawa, and Kyosuke Yoshimi. "Quantitative Evaluation of Microstructure in Mo-Si-B-TiC Alloy Produced by Melting and Tilt Casting Methods." MATERIALS TRANSACTIONS 59, no. 1 (2018): 136–45. http://dx.doi.org/10.2320/matertrans.m2017194.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Birsan, G., P. Ashtari, and S. Shankar. "Valid mould and process design to cast tensile and fatigue test bars in tilt pour casting process." International Journal of Cast Metals Research 24, no. 6 (2011): 378–84. http://dx.doi.org/10.1179/1743133611y.0000000005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Splendora, Anthony. "Dead Tilt: Playing for Keeps at “The Blue Hotel,” the Prize and the Price." Janus Head 14, no. 2 (2015): 135–58. http://dx.doi.org/10.5840/jh201514224.

Full text

Abstract:

Stephen Crane had not advanced beyond his teenage years before twelve of the sixteen original members of his immediate family had died, and by his early twenties he was becoming symptomatic with the tuberculosis that would kill him at twenty eight. Death, ever present, overshadowed his life and like a threatening eclipse looms, markedly, in his best work. “The Blue Hotel,” a crowning realization of the short story form, is a site for the expurgation of that relentless spectre, its alienated and adversarial Swede a personification of Crane’s own dissolution, forthwith to be ritualistically purg

APA, Harvard, Vancouver, ISO, and other styles

23

Soinila, E., T. Pihlajamäki, S. Bossuyt, and H. Hänninen. "A combined arc-melting and tilt-casting furnace for the manufacture of high-purity bulk metallic glass materials." Review of Scientific Instruments 82, no. 7 (2011): 073901. http://dx.doi.org/10.1063/1.3606444.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Brandle, Greggory, Kaitlyn Rizzo, Nicholas A. Cheney, and Brian C. Clark. "A Retrospective Chart Review to Determine Lateral Ankle Instability Treatment based off of the Degree of Varus Tilt." Foot & Ankle Orthopaedics 5, no. 4 (2020): 2473011420S0014. http://dx.doi.org/10.1177/2473011420s00143.

Full text

Abstract:

Category: Ankle Introduction/Purpose: One of the most common injuries in the United States is the ankle sprain, accounting for 10-15% of sport injuries. Without proper treatment, about one-third of patients reinjure the same ankle and can progress to chronic lateral ankle instability. An ankle can be clinically evaluated by performing an inversion stress test and measuring the degree of varus tilt. The purpose of this retrospective chart review was to examine if a correlation exists between the degree of varus tilt on a stress x-ray and whether the patients were treated conservatively or surgi

APA, Harvard, Vancouver, ISO, and other styles

25

Gojzewski, Hubert, Fatemeh Ghani, and Mirosław Szybowicz. "Thin films of copper phthalocyanine deposited by solution processing methods." Materials Science-Poland 38, no. 1 (2020): 79–90. http://dx.doi.org/10.2478/msp-2020-0007.

Full text

Abstract:

AbstractIn this work, we show and discuss the surface structure picture of copper phthalocyanine (CuPc) thin films deposited from trifluoroacetic acid (TFA) solvent onto silicon substrates at ambient conditions by four solution processing methods, namely drop-casting, dip-coating, spin-casting and spray-coating. The CuPc films were studied by AFM, as the main technique, and complemented by micro-Raman spectroscopy. Essentially, such thin films consist of CuPc molecular nanoribbons of a fixed ~1 nm thickness. CuPc molecules are arranged in an in-plane direction and formed in stacks under a defi

APA, Harvard, Vancouver, ISO, and other styles

26

Riedel, E., P. Köhler, M. Ahmed, B. Hellmann, I. Horn, and S. Scharf. "Industrial suitable and digitally recordable application of ultrasound for the enviromentally friendly degassing of aluminium melts before tilt casting." Procedia CIRP 98 (2021): 589–94. http://dx.doi.org/10.1016/j.procir.2021.01.159.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Thuong, Nguyen Van, Zuhailawati Hussain, Anasyida Abu Seman, and T. D. Huy. "Preparation of Globular Microstructure Aluminum Alloy Using Cooling Slope Casting as Feed Material for Equal Channel Pressing Process." Advanced Materials Research 1024 (August 2014): 247–50. http://dx.doi.org/10.4028/www.scientific.net/amr.1024.247.

Full text

Abstract:

Equal channel angular pressing (ECAP) could be used to achieve ultra fine grains in bulk aluminum alloy through severe plastic deformation. Typically a feed material of as-cast aluminum alloys is used with a typical hypoeutectic solidification structure, consisting of primary aluminum dendrites and interdendritic network of lamellar eutectic silicon. On the other hand, semi-solid metal casting provides non-dendritic and globular microstructure which is one of a considerable factor in obtaining homogenous microstructure after ECAP. This work is an attempt to produce aluminum alloy with globular

APA, Harvard, Vancouver, ISO, and other styles

28

Ebraheim, Nabil A., Edward R. Savolaine, Kevin Paley, and W. Thomas Jackson. "Comminuted Fracture of the Calcaneus Associated with Subluxation of the Talus." Foot & Ankle 14, no. 7 (1993): 380–84. http://dx.doi.org/10.1177/107110079301400702.

Full text

Abstract:

Two cases of complex fracture dislocation of the calcaneus having an unusual pattern of injury are described. The cases exhibit the following special characteristics: (1) fracture dislocation of the calcaneus where the primary fracture line separates the calcaneus into an anteromedial fragment that maintains its normal relationship to the talus and a posterolateral fragment that is dislocated from the subtalar joint. This posterolateral fragment moves laterally and lies adjacent to the fibula; (2) a secondary fracture line separating the lateral portion of the posterior facet from the tuberosi

APA, Harvard, Vancouver, ISO, and other styles

29

Chen, Hong Mei, Hua Shun Yu, Guang Hui Min, and Yun Xue Jin. "Study on the Microstructure and Texture of Warm Rolled ZK60 Magnesium Alloy Sheet." Advanced Materials Research 557-559 (July 2012): 1344–48. http://dx.doi.org/10.4028/www.scientific.net/amr.557-559.1344.

Full text

Abstract:

The microstructure and macrotexture of ZK60 alloy sheet were investigated through OM and XRD, which were produced by twin roll casting and sequential warm rolling. Microstructure of twin roll cast ZK60 alloy changed from dendrite structure to fibrous structure with elongated grains and high density shear bands along the rolling direction after warm rolling process at different rolling parameters. The density of shear bands increased with the decreasing of the rolling temperature, or the increasing of per pass rolling reduction. Dynamic recrystallization could be found during the warm rolling p

APA, Harvard, Vancouver, ISO, and other styles

30

Lee, C. J., J. C. Huang, and P. L. Hsieh. "Using Friction Stir Processing to Fabricate Mg Based Composites with Nano Fillers." Key Engineering Materials 313 (July 2006): 69–76. http://dx.doi.org/10.4028/www.scientific.net/kem.313.69.

Full text

Abstract:

There have been numerous methods in fabricating particulate reinforced metallic matrix composites, including stir casting, squeeze casting, spray forming, powder metallurgy, and mechanical alloying. In this paper, one solid state processing technique, friction stir processing, is applied to incorporate 5-15 vol% nano-sized ceramic particles SiO2 into the AZ61 Mg alloy matrix to form bulk composites, using the characteristic rotating downward and circular material flow around the stir pin. The upper working FSP temperature is controlled to less than 400oC in order to avoid chemical reaction. Th

APA, Harvard, Vancouver, ISO, and other styles

31

Zadorozhnyy, Vladislav, Sergey V. Ketov, Takeshi Wada та ін. "Novel α + β Type Ti-Fe-Cu Alloys Containing Sn with Pertinent Mechanical Properties". Metals 10, № 1 (2019): 34. http://dx.doi.org/10.3390/met10010034.

Full text

Abstract:

Rising demand for bone implants has led to the focus on future alternatives of alloys with better biocompatibility and mechanical strength. Thus, this research is dedicated to the synthesis and investigation of new compositions for low-alloyed Ti-based compounds, which conjoin relatively acceptable mechanical properties and low elastic moduli. In this regard, the structural and mechanical properties of α + β Ti-Fe-Cu-Sn alloys are described in the present paper. The alloys were fabricated by arc-melting and tilt-casting techniques which followed subsequent thermo-mechanical treatment aided by

APA, Harvard, Vancouver, ISO, and other styles

32

Amini, Amin, and Konstantinos Banitsas. "Using Kinect v2 to Control a Laser Visual Cue System to Improve the Mobility during Freezing of Gait in Parkinson’s Disease." Journal of Healthcare Engineering 2019 (February 20, 2019): 1–8. http://dx.doi.org/10.1155/2019/3845462.

Full text

Abstract:

Different auditory and visual cues have been proven to be very effective in improving the mobility of people with Parkinson’s (PwP). Nonetheless, many of the available methods require user intervention and so on to activate the cues. Moreover, once activated, these systems would provide cues continuously regardless of the patient’s needs. This research proposes a new indoor method for casting dynamic/automatic visual cues for PwP based on their head direction and location in a room. The proposed system controls the behavior of a set of pan/tilt servo motors and laser pointers, based on the rea

APA, Harvard, Vancouver, ISO, and other styles

33

Sanz-Pena, Inigo, Shanika Arachchi, Dhammika Halwala-Vithanage, et al. "Characterising the Mould Rectification Process for Designing Scoliosis Braces: Towards Automated Digital Design of 3D-Printed Braces." Applied Sciences 11, no. 10 (2021): 4665. http://dx.doi.org/10.3390/app11104665.

Full text

Abstract:

The plaster-casting method to create a scoliosis brace consists of mould generation and rectification to obtain the desired orthosis geometry. Alternative methods entail the use of 3D scanning and CAD/CAM. However, both manual and digital design entirely rely on the orthotist expertise. Characterisation of the rectification process is needed to ensure that digital designs are as efficient as plaster-cast designs. Three-dimensional scans of five patients, pre-, and post-rectification plaster moulds were obtained using a Structure Mark II scanner. Anatomical landmark positions, transverse sectio

APA, Harvard, Vancouver, ISO, and other styles

34

Acimovic-Pavlovic, Zagorka, Milutin Djuricic, Sasa Drmanic, and Rade Djuricic. "The influence of the parameters of lost foam process on the quality of aluminum alloys castings." Chemical Industry 64, no. 2 (2010): 121–27. http://dx.doi.org/10.2298/hemind100301011a.

Full text

Abstract:

This paper presents the research results of application of Lost foam process for aluminum alloys castings of a simple geometry. The process characteristic is that patterns and gating of moulds, made of polymers, stay in the mould till the liquid metal inflow. In contact with the liquid metal, pattern intensely and in relatively short time decomposes and evaporates, which is accompanied by casting crystallization. As a consequence of polymer pattern decomposition and evaporation a great quantity of liquid and gaseous products are produced, which is often the cause of different types of casting

APA, Harvard, Vancouver, ISO, and other styles

35

Guilmeau, E., Catherine Henrist, Tohru Suzuki, et al. "Texture of Alumina by Neutron Diffraction and SEM-EBSD." Materials Science Forum 495-497 (September 2005): 1395–400. http://dx.doi.org/10.4028/www.scientific.net/msf.495-497.1395.

Full text

Abstract:

The orientation distributions of α-Al2O3 textured ceramics are determined from neutron diffraction and SEM-EBSD. A curved position-sensitive detector coupled to a tilt angle (χ) scan allowed the whole neutron diffraction pattern treatment in the combined Rietveld-WIMV-Popa algorithm. Analyses from neutron and electron diffraction data gave similar results if EBSD data are smoothed to account for grain statistics. Four textured alumina ceramics were prepared by slipcasting under a high magnetic field and sintered at 800°C, 1300°C, 1400°C and 1600°C. The inverse pole figures and EBSD-mapping hig

APA, Harvard, Vancouver, ISO, and other styles

36

Dewanto, Clement, and Zulkarnain Muslim. "The Effectiveness of Closed Reduction Method Using Chinese Finger Trap and Immobilization of Circular Casts in the Management of Distal Radius Closed Fractures." Sriwijaya Journal of Surgery 1, no. 2 (2018): 46–53. http://dx.doi.org/10.37275/sjs.v1i2.10.

Full text

Abstract:

ABSTRACT Introduction. Distal radius fractures are one of the most common fractures encountered by bone surgeons in the emergency room. In America, accounting for about 8% to 17% of all fracture cases that have been treated and around 75% of fractures in the forearm. In Palembang, especially in Dr. Moh Hoesin general hospital there was no data yet about the number of incidents of distal radius fractures, how to treat (conservatively or operatively) and success rates. For this reason it is difficult to measure accurately, how likely is it that a distal radius fracture can be successfully

APA, Harvard, Vancouver, ISO, and other styles

37

Zhang, Q. S., W. Zhang, X. M. Wang, Y. Yokoyama, K. Yubuta, and A. Inoue. "Structure, Thermal Stability and Mechanical Properties of Zr₆₅Al_7.5Ni₁₀Cu_17.5 Glassy Alloy Rod with a Diameter of 16 mm Produced by Tilt Casting." MATERIALS TRANSACTIONS 49, no. 9 (2008): 2141–46. http://dx.doi.org/10.2320/matertrans.mer2008127.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Nimmagadda, Vamshi Varenya, Bhanu Prabha T., and Johorul Islam Tapadar. "A comparative study of management of Colles fracture by closed reduction with cast versus closed reduction with internal fixation (K-wires/4 mm CC screws)." International Journal of Research in Orthopaedics 4, no. 1 (2017): 86. http://dx.doi.org/10.18203/issn.2455-4510.intjresorthop20175655.

Full text

Abstract:

<p class="abstract"><strong>Background:</strong> Distal radius fracture is extremely common and represents 16% of fractures treated by orthopaedic surgeons. Near anatomical reduction with restoration of radial length, radial tilt and ulnar variances are important for good functional results. A variety of treatment options have been proposed for distal radius fracture closed reduction and immbolization in cast has been the main stay of treatment, but because it invariably results in malunion, poor functional outcome and cosmetic outcome, other modality of treatment were brough

APA, Harvard, Vancouver, ISO, and other styles

39

Quick, Charles D., Adam M. Meyer, Jill M. Cancio, et al. "645 Adjustable Dynamic Ankle Foot Orthosis for Recovery of Functional Mobility." Journal of Burn Care & Research 42, Supplement_1 (2021): S179—S180. http://dx.doi.org/10.1093/jbcr/irab032.295.

Full text

Abstract:

Abstract Introduction We present a case of a 23-year-old woman with primary-onset peroneal nerve impairment following diagnosis of purpura fulminans involving 30% total body surface area, who was treated in our burn center. Medical complexity required a unique rehabilitation intervention. The purpose of this case study is to demonstrate the effectiveness of a dynamic ankle-foot orthosis (AFO) to recover functional ambulation. Methods Upon initial evaluation and during weekly re-evaluations, a physical therapist (PT) and an occupational therapist (OT) measured active range of motion (AROM), pas

APA, Harvard, Vancouver, ISO, and other styles

40

Yoon, Seog Young, Jong Kook Lee, Kyu Hong Hwang, and B. S. Jun. "The Vibrative Casting with a Thixotropic Behavior." Key Engineering Materials 317-318 (August 2006): 147–50. http://dx.doi.org/10.4028/www.scientific.net/kem.317-318.147.

Full text

Abstract:

To prepare the vibrated casting slurries of waste tile particles, ultrafine colloids of the waste tile was added as a binder materials and as a thixotropic agent to avoid segregation between large and fine grains. The plasticity of the slurries was controlled by the rheology of colloids of the waste tile. To give thixotropic behavior, the dispersion and coagulation behavior of the colloidal suspension were investigated by the zeta potentiometer. The point of zero charge of the suspension was shown near pH 5 and maximum zeta potential was -55[mV] near pH 11. Maximum agglomerate particles were a

APA, Harvard, Vancouver, ISO, and other styles

41

Hiremath, A., A. Amar Murthy, S. V. Pranavathmaja, A. Jajodia, and R. Sreenath. "Effect of end chills, reinforcement content and carburization on the hardness of LM25-borosilicate glass particulate composite." Journal of Mechanical Engineering and Sciences 12, no. 4 (2018): 4203–15. http://dx.doi.org/10.15282/jmes.12.4.2018.16.0362.

Full text

Abstract:

Aluminium metal matrix composites (AMCs) are widely employed in aerospace and automobile applications. Thus, they are required to operate reliably under a severe corrosive, high temperature and carbonaceous environments, without undergoing any deterioration in their mechanical properties. The paper is the compilation of the experimental results and analysis carried out to investigate the effect of different end chills, reinforcement content and carburization on the LM25 aluminium alloy reinforced with borosilicate glass powder. The composites are prepared via stir casting route by varying the

APA, Harvard, Vancouver, ISO, and other styles

42

Yuan, Teng, Jian Yin, Yingling Liu, Weiping Tu, and Zhuohong Yang. "Micro/Nanoscale Structured Superhydrophilic and Underwater Superoleophobic Hybrid-Coated Mesh for High-Efficiency Oil/Water Separation." Polymers 12, no. 6 (2020): 1378. http://dx.doi.org/10.3390/polym12061378.

Full text

Abstract:

A novel micro/nanoscale rough structured superhydrophilic hybrid-coated mesh that shows underwater superoleophobic behavior is fabricated by spray casting or dipping nanoparticle–polymer suspensions on stainless steel mesh substrates. Water droplets can spread over the mesh completely; meanwhile, oil droplets can roll off the mesh at low tilt angles without any penetration. Besides overcoming the oil-fouling problem of many superhydrophilic coatings, this superhydrophilic and underwater superoleophobic mesh can be used to separate oil and water. The simple method used here to prepare the organ

APA, Harvard, Vancouver, ISO, and other styles

43

Ediz, N., and İ. Tatar. "Modification of Kütahya Art Tile Casting Muds for Taller Products." Key Engineering Materials 264-268 (May 2004): 1665–68. http://dx.doi.org/10.4028/www.scientific.net/kem.264-268.1665.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Rolf, Hans J., and Alfred Enderle. "Hard fallow deer antler: A living bone till antler casting?" Anatomical Record 255, no. 1 (1999): 69–77. http://dx.doi.org/10.1002/(sici)1097-0185(19990501)255:1<69::aid-ar8>3.0.co;2-r.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Cox, M., and R. A. Harding. "Influence of tilt filling on Weibull modulus of 2L99 aluminium investment castings." Materials Science and Technology 23, no. 2 (2007): 214–24. http://dx.doi.org/10.1179/174328407x157263.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Sharma, Bharat. "Flash Prevention in HPDC." International Journal for Research in Applied Science and Engineering Technology 9, no. 8 (2021): 1902–9. http://dx.doi.org/10.22214/ijraset.2021.37661.

Full text

Abstract:

Abstract: Welcome to steady die casting solutions. We are at steady die casting solutions keep on continue to give die casting solutions. In this paper we will discuss how we can predict flash location in die and how we can correct before die making or after die making. We also discuss how we can calculate individual tie bar load when we load a die, tie bar load will change on each die changeover because of it’s center of gravity. We discuss how casting shot centroid will effect tie bar load which directly responsible for flash. All this things we try to explain with an example, I hope it will

APA, Harvard, Vancouver, ISO, and other styles

47

Hermosilla, Manuel, Fernanda Gutiérrez-Navratil, and Juan Prieto-Rodríguez. "Can Emerging Markets Tilt Global Product Design? Impacts of Chinese Colorism on Hollywood Castings." Marketing Science 37, no. 3 (2018): 356–81. http://dx.doi.org/10.1287/mksc.2018.1089.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Xu, Zhang Yin, and Yin Ju Jiang. "Study on the Thermal Fatigue Resistance of Ductile Iron." Advanced Materials Research 512-515 (May 2012): 2093–96. http://dx.doi.org/10.4028/www.scientific.net/amr.512-515.2093.

Full text

Abstract:

Simulated service condition of aluminum ingot casting molds, samples of ductile iron was tested in a temperature Cycle from750°C and water-cooled to 25°C till a crack appeared in the sample. its thermal fatigue resistance of samples based various microstructure included as—casting, annealing or alloying ferritic matrix structure, or alloying pearlitic structure and the upper or low the bainitic structure had been researched. The study shows that the thermal fatigue resistance of the annealing ferritic nodular cast iron was superior to the others.

APA, Harvard, Vancouver, ISO, and other styles

49

Xu, Bao Cai, Long Zhang, Ming Hui Ye, Rong Xia Duan, and Kai Lei Zhao. "Prestressed Ceramics Lateral Confined by Aluminum Alloy." Advanced Materials Research 177 (December 2010): 669–72. http://dx.doi.org/10.4028/www.scientific.net/amr.177.669.

Full text

Abstract:

This article presents the results for the prestress of ceramics lateral confined by aluminum alloy. Prestressed ceramics composite is produced by casting molten aluminum alloy around a hot ceramic tile and then cooling it down with blowing air. Different technical parameters of the casting are investigated. Al2O3/ZrO2(4Y) composite ceramics alumina tiles prepared by combustion synthesis under high gravity are used in this study to investigate the effect of confinement and prestress. The samples of ceramics are lateral confined by aluminum alloy, which lead to monaxial compressive stress in the

APA, Harvard, Vancouver, ISO, and other styles

50

Bescansa, Paloma, Iñigo Virto, Oihane Fernández-Ugalde, María José Imaz, and Alberto Enrique. "Casting Activity ofScherotheca gigasin No-Till Mediterranean Soils: Role in Organic Matter Incorporation and Influence of Aridity." Applied and Environmental Soil Science 2010 (2010): 1–6. http://dx.doi.org/10.1155/2010/526934.

Full text

Abstract:

The behaviour of earthworms, their role in organic matter incorporation into the soil, and the influence of aridity in such processes in arid and semiarid regions have scarcely been studied. In this study, physico-chemical analyses of the casts and the surrounding no-till agricultural soils of three experimental sites representing an aridity gradient in Navarre (NW Spain) were done. The casts were formed by the activity of the only anecic species,Scherotheca gigas(Dugès, 1828), ubiquitous in no-till soils in this region. We observed a significant depletion of clay and higher concentration of t

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!