Academic literature on the topic 'Time Slip'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Time Slip.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Time Slip"

1

Beaulieu, John C., and Dyremple B. Marsh. "Influence of Bed Cover Types on Production Time and Quality of Sweetpotato Slips." HortTechnology 12, no. 4 (2002): 691–93. http://dx.doi.org/10.21273/horttech.12.4.691.

Full text
Abstract:
Sweetpotato (Ipomoea batatas) cultivars, Carver, Potojam, Jewel and Centennial were evaluated for slip production, using topsoil, sawdust, sand and a general-purpose peat-based commercial growing media as bed covers. Temperature measured 2 inches (5.1 cm) below the surface of the hot bed varied with covers and date measured. Sand maintained the highest bed temperature, 77 °F (25.0 °C) at 0800 hr and 79 °F (26.1 °C) at 1400 hr, throughout the growing season. Peat-covered roots produced the maximum number of slips/plot (111), while roots covered with topsoil and sawdust produced comparable yield
APA, Harvard, Vancouver, ISO, and other styles
2

Cockayne, Sarah, Caroline Fairhurst, Gillian Frost, et al. "Slip-resistant footwear reduces slips among National Health Service workers in England: a randomised controlled trial." Occupational and Environmental Medicine 78, no. 7 (2021): 472–78. http://dx.doi.org/10.1136/oemed-2020-106914.

Full text
Abstract:
ObjectivesAssess the effectiveness of 5* GRIP-rated slip-resistant footwear in preventing slips in the workplace compared to usual footwear (control group).MethodsA multicentre, randomised controlled trial; 4553 National Health Service (NHS) staff were randomised 1:1 to the intervention group (provided with 5* GRIP-rated slip-resistant footwear) or the control group. The primary outcome of incidence rate of self-reported slips in the workplace over 14 weeks was analysed using a mixed-effects negative binomial model. Secondary outcome measures included incidence rate of falls from a slip, falls
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Ning, Qin Zhang, Shuangcheng Zhang, and Xiaoli Wu. "Algorithm for Real-Time Cycle Slip Detection and Repair for Low Elevation GPS Undifferenced Data in Different Environments." Remote Sensing 13, no. 11 (2021): 2078. http://dx.doi.org/10.3390/rs13112078.

Full text
Abstract:
Real-time cycle slip detection and repair is one of the key issues in global positioning system (GPS) high precision data processing and application. In particular, when GPS stations are in special environments, such as strong ionospheric disturbance, sea, and high-voltage transmission line interference, cycle slip detection and repair in low elevation GPS observation data are more complicated than those in normal environments. For low elevation GPS undifferenced carrier phase data in different environments, a combined cycle slip detection algorithm is proposed. This method uses the first-orde
APA, Harvard, Vancouver, ISO, and other styles
4

Dai, Zhen, Stefan Knedlik, and Otmar Loffeld. "Instantaneous Triple-Frequency GPS Cycle-Slip Detection and Repair." International Journal of Navigation and Observation 2009 (August 23, 2009): 1–15. http://dx.doi.org/10.1155/2009/407231.

Full text
Abstract:
A real-time algorithm to detect, determine, and validate the cycle-slips for triple-frequency GPS is proposed. The cycle-slip detection is implemented by simultaneously applying two geometry-free phase combinations in order to detect more insensitive cycle-slips, and it is applicable for high data rate applications. The cycle-slip determination adaptively uses the predicted phase data and the code data. LAMBDA technique is applied to search for the cycle-slip candidates. The cycle-slip validation provides strict test criteria to identify the cycle-slip candidates under low phase noise. The rel
APA, Harvard, Vancouver, ISO, and other styles
5

Wu, Kent, Suzy He, Geoff Fernie, and Atena Roshan Fekr. "Deep Neural Network for Slip Detection on Ice Surface." Sensors 20, no. 23 (2020): 6883. http://dx.doi.org/10.3390/s20236883.

Full text
Abstract:
Slip-induced falls are among the most common causes of major occupational injuries and economic loss in Canada. Identifying the risk factors associated with slip events is key to developing preventive solutions to reduce falls. One factor is the slip-resistance quality of footwear, which is fundamental to reducing the number of falls. Measuring footwear slip resistance with the recently developed Maximum Achievable Angle (MAA) test requires a trained researcher to identify slip events in a simulated winter environment. The human capacity for information processing is limited and human error is
APA, Harvard, Vancouver, ISO, and other styles
6

Sun, Qian, Yonghong Wu, Lishan Liu, and B. Wiwatanapataphee. "Solution of Time Periodic Electroosmosis Flow with Slip Boundary." Abstract and Applied Analysis 2014 (2014): 1–10. http://dx.doi.org/10.1155/2014/789147.

Full text
Abstract:
Recent research confirms that slip of a fluid on the solid surface occurs at micrometer scale. Slip on solid surface may cause the change of interior material deformation which consequently leads to the change of velocity profile and stress field. This paper concerns the time periodic electroosmotic flow in a channel with slip boundary driven by an alternating electric field, which arises from the study of particle manipulation and separation such as flow pumping and mixing enhancement. Although exact solutions to various flow problems of electroosmotic flows under the no-slip condition have b
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Ching Chung. "Slip-Resistance Assessment on Different Types of Emery Anti-Slip Strip." Advanced Materials Research 690-693 (May 2013): 3436–40. http://dx.doi.org/10.4028/www.scientific.net/amr.690-693.3436.

Full text
Abstract:
Anti-slip strip was one of the most popular slip-resistant products indoor and outdoor, especially on the ramp. By using anti-slip strip the roughness of floor can be increased, the COF will be increased and the risk of slips and falls will be reduced at the same time. This study wanted to find out the effects of slip-resistance under different particle sizes of steel grit, different floor contamination conditions and different inclined angles while using the emery anti-slip strip. The results demonstrated that the particle size of steel grit used on the emery anti-slip strip has significant i
APA, Harvard, Vancouver, ISO, and other styles
8

Bassani, J. L. "Single Crystal Hardening." Applied Mechanics Reviews 43, no. 5S (1990): S320—S327. http://dx.doi.org/10.1115/1.3120835.

Full text
Abstract:
The hardening behavior of individual slip systems under multislip deformations is reinterpreted, which leads to a new analytical description of hardening. Most significantly, the transition from stage I (single slip easy glide) to stage II (multiple slip) hardening for “single slip” orientations of the tensile axis and, generally, the orientation dependence of hardening is well predicted. Even within a time-independent framework the hardening description leads to a unique determination of the active set of slips. Numerical calculations are based on an extremum principle and utilize a modified
APA, Harvard, Vancouver, ISO, and other styles
9

Montrasio, L., R. Valentino, and G. L. Losi. "Towards a real-time susceptibility assessment of rainfall-induced shallow landslides on a regional scale." Natural Hazards and Earth System Sciences 11, no. 7 (2011): 1927–47. http://dx.doi.org/10.5194/nhess-11-1927-2011.

Full text
Abstract:
Abstract. In the framework of landslide risk management, it appears relevant to assess, both in space and in time, the triggering of rainfall-induced shallow landslides, in order to prevent damages due to these kind of disasters. In this context, the use of real-time landslide early warning systems has been attracting more and more attention from the scientific community. This paper deals with the application, on a regional scale, of two physically-based stability models: SLIP (Shallow Landslides Instability Prediction) and TRIGRS (Transient Rainfall Infiltration and Grid-based Regional Slope-
APA, Harvard, Vancouver, ISO, and other styles
10

Tang, Yang, Peng Sun, Guorong Wang, and Wang Li. "Analysis of pressure-bearing performance and optimization of structural parameters of the slip in a compression packer." Science Progress 103, no. 1 (2019): 003685041988110. http://dx.doi.org/10.1177/0036850419881106.

Full text
Abstract:
In drilling and completion operations, a packer is a downhole tool to seal the annular space between various sizes of string and borehole. As a key component of packer, slip plays a role of fixed support in the process of setting, thus ensuring a long-term stable sealing of the packer. Aiming at the problem of damage caused by casing pressure on the slip after setting, based on the stress analysis of slip during setting, the slip material with hardness lower than casing was selected, and its finite element analysis model was established. Then, the pressure-bearing law of the slip teeth under t
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Time Slip"

1

Xu, Guoda, John M. Bartha, Stuart McNamee, Larry Rheaume, and Allen Khosrowabadi. "OPTICAL SLIP-RING CONNECTOR." International Foundation for Telemetering, 1999. http://hdl.handle.net/10150/607336.

Full text
Abstract:
International Telemetering Conference Proceedings / October 25-28, 1999 / Riviera Hotel and Convention Center, Las Vegas, Nevada<br>Current ground-based tracking systems at the DoD test and training ranges require transmission of a variety of signals from rotating platform to fixed control and process center. Implementation of commercial off the shelf (COTS) solution for transmitting high-speed, multiple-channel data signals over a rotational platform prompt the development of an advanced electro-optic hybrid rotating-to-fixed information transmission technology. Based on current demand,
APA, Harvard, Vancouver, ISO, and other styles
2

Beringer, Danielle Nicole. "An Exploratory Study Investigating the Time Duration of Slip-Induced Changes in Gait." Thesis, Virginia Tech, 2013. http://hdl.handle.net/10919/23079.

Full text
Abstract:
The biomechanics of slips are commonly studied in laboratory settings in an effort to improve the understanding of slip mechanisms for the advancement of slip and fall prevention strategies and risk assessment methods.  Prior studies have shown changes in gait after slipping, and these changes can reduce the external validity of experimental results.  As such, most researchers only slip participants one time.  The ability to slip participants more than once, after allowing gait to return to a natural baseline, would improve the experimental efficiency of these studies.  Therefore, the goal of
APA, Harvard, Vancouver, ISO, and other styles
3

Knox-Williams, Charlotte. "Slip, split, snag : diagramming the time image between Deleuzean theory and fine art practice." Thesis, University of Southampton, 2012. https://eprints.soton.ac.uk/346353/.

Full text
Abstract:
The project has engaged critically and reflectively in a series of investigations through Deleuzean theory and fine art practice. It has explored the functions of the diagram in relation to direct images of time, identifying novel perspectives on these aspects of Deleuzean theory through interconnections and a reciprocally transformative engagement with art practice. The research offers fresh insight into the complicated temporal shifts that become apparent through practice by layering visual and discursive elements. The work is concerned with the interrelation and transformation of different
APA, Harvard, Vancouver, ISO, and other styles
4

Trømborg, Jørgen Kjoshagen. "Modelling the onset of frictional sliding : Rupture fronts, slow slip and time-dependent junction laws." Thesis, Ecully, Ecole centrale de Lyon, 2015. http://www.theses.fr/2015ECDL0055/document.

Full text
Abstract:
Pas de résumé<br>Friction is scientifically interesting and technologically important. We can characterize friction well, but even the friction force between macroscopic surfaces of known chemistry and topography under known loading conditions cannot yet be predicted from the bottom up. A major obstacle to predicting frictional properties is to link the macroscopic observations to the behavior of the myriad microscopic connections that make up the interaction.The onset of frictional sliding occurs through the breaking of the contacts that were keeping the interface stuck. Recent experiments pe
APA, Harvard, Vancouver, ISO, and other styles
5

Crow, Derrick Alan. "YOU'RE THERE IN THE TIME SLIP: A HERMENEUTIC EXPLORATION OF AESTHETIC EXPERIENCE IN MUSICKING THROUGH THE LENS OF MIHALYI CSIKZENTMIHALYI'S FLOW STATE THEORY." OpenSIUC, 2012. https://opensiuc.lib.siu.edu/dissertations/532.

Full text
Abstract:
The purpose of this study is to provide a detailed description of the aesthetic experience as it is encountered in music, and, in so doing, to develop an operational definition of aesthetic experience as it is understood and experienced by practitioners in relation to the phenomenon as it is found in the canon of literature. The following specific questions are addressed: first, how do philosophers and practitioners view aesthetic experience; what commonalities or differences do these views have; and what understandings can be gained through an examination of these theories? Second, when the v
APA, Harvard, Vancouver, ISO, and other styles
6

Hellman, Hanna. "Data Aggregation in Time Sensitive Multi-Sensor Systems : Study and Implementation of Wheel Data Aggregation for Slip Detection in an Autonomous Vehicle Convoy." Thesis, KTH, Mekatronik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-217857.

Full text
Abstract:
En övergång till bilar utrustade med avancerade automatiska säkerhetssystem (ADAS) och även utvecklingen mot självkörande fordon innebär ökad trafik på den lokala databussen. Det finns således ett behov av att både minska den faktiska mängden data som överförs, samtidigt som värdet på datat ökas. Data aggregation tillämpas i dagsläget inom områden såsom trådlösasensornätverk och mindre mobila robotar (WMR’s) och skulle kunna vara en del av en lösning. Denna rapport avser undersöka aggregation av sensordata i ett tidskänsligt system. För ett användarfall gällande halka under konvojkörning testa
APA, Harvard, Vancouver, ISO, and other styles
7

Xu, Guoda, John Bartha, Sean Zhang, et al. "Electro-Optic Hybrid Rotary Joint (EOHRJ)." International Foundation for Telemetering, 2000. http://hdl.handle.net/10150/606501.

Full text
Abstract:
International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California<br>An advanced electro-optic hybrid rotary joint (EOHRJ) has been developed in Phase II of an AF SBIR effort with Physical Optics Corporation (POC) to replace cable wrap structure for multi-channel rotation-to-fixed (RTF) signal transmission. The EOHRJ meets AFFTC and other range special needs with a generic, high performance, rotary joint solution. At the moment, we have successfully installed and tested the EOHRJ on our KTM tracker system with the fol
APA, Harvard, Vancouver, ISO, and other styles
8

Bott, M. P. "A new, robust, and generic method for the quick creation of smooth paths and near time-optimal path tracking." Thesis, University of St Andrews, 2011. http://hdl.handle.net/10023/2095.

Full text
Abstract:
Robotics has been the subject of academic study from as early as 1948. For much of this time, study has focused on very specific applications in very well controlled environments. For example, the first commercial robots (1961) were introduced in order to improve the efficiency of production lines. The tasks undertaken by these robots were simple, and all that was required of a control algorithm was speed, repetitiveness and reliability in these environments. Now however, robots are being used to move around autonomously in increasingly unpredictable environments, and the need for robotic cont
APA, Harvard, Vancouver, ISO, and other styles
9

Renou, Julien. "Observations and modeling of the seismic rupture development based on the analysis of source time functions." Thesis, Université de Paris (2019-....), 2020. https://theses.md.univ-paris-diderot.fr/RENOU_Julien_va2.pdf.

Full text
Abstract:
Notre compréhension de la physique de la source sismique, qui donne naissance à des séismes de toute magnitude, requiert l’observation d’une large population d’événements. Les méthodes d’analyse systématique de la sismicité mondiale remplissent ce rôle et permettent d’extraire les propriétés des séismes puis de les confronter aux modèles de rupture sismique. La méthode SCARDEC fait partie de ces méthodes et retrouve les fonctions source d’événements sur une large gamme de magnitudes (Mw &gt; 5.7). La fonction source, puisqu’elle décrit l’évolution tem porelle du taux de moment, est un observab
APA, Harvard, Vancouver, ISO, and other styles
10

Otava, Lukáš. "Firmware pro robotické vozítko." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220069.

Full text
Abstract:
This thesis is focused on a firmware for robotic vehicle based on the ARM Cortex-M3 architecture that is running a real-time operating system (RTOS). Theoretical part describes available solutions of embedded RTOS and concrete HW implementation of the robotic vehicle. There is also comparison of the three selected RTOS with their measurements. Result of this thesis is base firmware compounded by a program modules that controls HW parts. There is also a sample PC and firmware application that extends base firmware. This sample application is able to communicate with robotic vehicle, control whe
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Time Slip"

1

Time slip. Guernica Editions, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Time-slip. Allen & Unwin, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Time-slip. Unwin Paperbacks, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

K, Dick Philip. Martian Time-Slip. Knopf Doubleday Publishing Group, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

K, Dick Philip. Martian time-slip. Houghton Mifflin Harcourt, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

K, Dick Philip. Martian time-slip. Vintage Books, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Zerler, Kathryn Schultz. A slip in time: An historic adventure at the Benton Harbor Ship Canal. Sleeping Cat Press, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pastoor, Rick. GRIP: Het geheim van slim werken. Uitgeverij NZ, 2019.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kurtzweil, Paula. Dieter's brews make tea time a dangerous affair: Slim chance of weight loss with these herbal drinks. Dept. of Health and Human Services, Public Health Service, Food and Drug Administration, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kurtzweil, Paula. Dieter's brews make tea time a dangerous affair: Slim chance of weight loss with these herbal drinks. Dept. of Health and Human Services, Public Health Service, Food and Drug Administration, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Time Slip"

1

Cole, Catherine M. "Time slip." In Global and World Art in the Practice of the University Museum. Routledge, 2017. http://dx.doi.org/10.4324/9781315621722-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Saldivar, Belem, Sabine Mondié, and Alexandre Seuret. "Suppressing Stick-Slip Oscillations in Oilwell Drillstrings." In Low-Complexity Controllers for Time-Delay Systems. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-05576-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Xu, Lingfeng, Changjian Liu, Sai Wang, Chen Liu, and Xu Feng. "BDS Real-Time Cycle-Slip Detection and Repair Based on Ionospheric Correction." In Lecture Notes in Electrical Engineering. Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0940-2_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Lingxuan, Yu Gan, Erhu Wei, Lifen Sui, and Xuexi Liu. "INS-Aided Single-Frequency Cycle-Slip Detection for Real-Time Kinematic GNSS." In Lecture Notes in Electrical Engineering. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0029-5_46.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Chen, Jie, Zhigang Huang, and Rui Li. "Real-Time Cycle Slip Detection and Repair Algorithm for SBAS Airborne Receiver." In Lecture Notes in Electrical Engineering. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46635-3_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Xie, Jiugang, Cuilin Kuang, Hongke Hou, and Xiaotao Bai. "Detecting Slow-Slip Events in GNSS Position Time Series Using Relative Strength Index." In Lecture Notes in Electrical Engineering. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7751-8_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Basrah, M. Sofian, E. Siampis, E. Velenis, D. Cao, and S. Longo. "Integration of torque blending and slip control using real-time nonlinear model predictive control." In Advanced Vehicle Control AVEC’16. Crc Press, 2016. http://dx.doi.org/10.1201/9781315265285-93.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Metzler, Mathias, Alessandro Scamarcio, Patrick Gruber, and Aldo Sorniotti. "Real-Time Capable Nonlinear Model Predictive Wheel Slip Control for Combined Driving and Cornering." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-38077-9_168.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Aochi, Hideo, and Mitsuhiro Matsu’ura. "Slip- and Time-dependent Fault Constitutive Law and its Significance in Earthquake Generation Cycles." In Earthquake Processes: Physical Modelling, Numerical Simulation and Data Analysis Part I. Birkhäuser Basel, 2002. http://dx.doi.org/10.1007/978-3-0348-8203-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Xia, Lei, Yufeng Yang, Chenxin Qing, Changsong Mei, and Xiong Pan. "Score Test Method of Real-Time Cycle Slip Detection Considering the Influence of Gross Error." In Lecture Notes in Electrical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3711-0_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Time Slip"

1

Jiaotong, Lu, Hu Lixin, Zhou Tong, Zhou Sheng, and Zhao Guoyong. "Time-varient slip sweep excitation time-distance optimization technology." In International Geophysical Conference, Beijing, China, 24-27 April 2018. Society of Exploration Geophysicists and Chinese Petroleum Society, 2018. http://dx.doi.org/10.1190/igc2018-050.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Liu, Qing, and Jonah H. Lee. "Time-Dependent Tire-Snow Modeling for Two-Dimensional Slip Conditions." In SAE 2006 World Congress & Exhibition. SAE International, 2006. http://dx.doi.org/10.4271/2006-01-1168.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kim, H. S., Y. J. Kim, W. J. Chin, and H. Yoon. "Determination of the Slip-Up Time for Slip Form System Using Surface Wave Velocity." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-66129.

Full text
Abstract:
When applying the slip form system, the early setting time of concrete corresponds to the hardening time of early-age concrete indicating that cast-in-place concrete has developed sufficient strength to be safely stripped off the form. This hardening time is thus an important indicator for the determination of the slip-up velocity of the slip form system. Therefore, need is for a technique enabling to evaluate the early hardening time of concrete in order to secure the safety of the slip form system and the quality of the constructed concrete. Among the methods using ultrasonic waves, this pap
APA, Harvard, Vancouver, ISO, and other styles
4

Manoj, Sai, Kanwen Wang, Hantao Huang, and Hao Yu. "Smart I/Os: a data-pattern aware 2.5D interconnect with space-time multiplexing." In 2015 ACM/IEEE International Workshop on System Level Interconnect Prediction (SLIP). IEEE, 2015. http://dx.doi.org/10.1109/slip.2015.7171707.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pui, Chak-Wa, Gang Wu, Freddy Y. C. Mang, and Evangeline F. Y. Young. "An Analytical Approach for Time-Division Multiplexing Optimization in Multi-FPGA based Systems." In 2019 ACM/IEEE International Workshop on System Level Interconnect Prediction (SLIP). IEEE, 2019. http://dx.doi.org/10.1109/slip.2019.8771330.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Xinquan*, Wang, Song Weiping, Wang Yuan, Sun Meng, and Dong Shiwei. "A New Modeling Method to Select Slip Time Rapidly and Accurately in Vibroseis Slip Sweep." In Beijing 2014 International Geophysical Conference & Exposition, Beijing, China, 21-24 April 2014. Society of Exploration Geophysicists and Chinese Petroleum Society, 2014. http://dx.doi.org/10.1190/igcbeijing2014-003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ikeda, Yuichi, and Tomokazu Kamijo. "Nonlinear discrete-time control of vehicle slip ratio." In 2015 54th IEEE Conference on Decision and Control (CDC). IEEE, 2015. http://dx.doi.org/10.1109/cdc.2015.7403170.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Phanomchoeng, G., R. Rajamani, and D. Piyabongkarn. "Real-time automotive slip angle estimation with nonlinear observer." In 2011 American Control Conference. IEEE, 2011. http://dx.doi.org/10.1109/acc.2011.5991054.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Pylypchuk, Valery, Shih-Ken Chen, Nikolai Moshchuk, and Bakhtiar Litkouhi. "Slip-Based Holistic Corner Control." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64882.

Full text
Abstract:
This paper describes an analytical methodology and related algorithms for controlling vehicle tire forces. The purpose of control is to provide a driver with a normal driving feel and keep the vehicle on a target path even under poor road conditions. All the control variables are calculated in real time by minimizing the error between actual and target CG forces and moments. Such a real time optimization is possible due to the availability of analytical solutions for the tire force adjustments derived in the matrix form. A key ingredient of the approach is the idea of constructing weight matri
APA, Harvard, Vancouver, ISO, and other styles
10

Changfang Chen, Yingmin Jia, and Fumitoshi Matsuno. "Wheel slip estimation based on real-time identification of tire-road friction conditions." In 2013 American Control Conference (ACC). IEEE, 2013. http://dx.doi.org/10.1109/acc.2013.6580261.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Time Slip"

1

Daly, James. Real-Time, In Situ Sensor for Control of Ammonia Slip in SCR Installations. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/921941.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mapping time-dependent changes in soil slip-debris flow probability. US Geological Survey, 1998. http://dx.doi.org/10.3133/i2586.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!