Relevant bibliographies by topics / Titane – Recyclage

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers
  5. Reports

Academic literature on the topic 'Titane – Recyclage'

Author: Grafiati
Published: 15 March 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Titane – Recyclage.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Titane – Recyclage"

1

Khare, Bishun N., Christopher P. McKay, Dale P. Cruikshank, Yasuhito Sekine, Patrick Wilhite, and Tomoko Ishihara. "Optical and chemical properties of tholins." Proceedings of the International Astronomical Union 4, S251 (2008): 441–42. http://dx.doi.org/10.1017/s1743921308022114.

Full text
Abstract:
AbstractFor over three decades tholins have been synthesized from mixtures of the cosmically abundant gases CH4, C2H6, NH3, H2O, HCHO, N2, and H2, previously in the Laboratory for Planetary Studies at Cornell University and in recent years at NASA Ames Research Center. The tholin synthesized by UV light or spark discharge on sequential and non-sequential pyrolysis GC-MS revealed hundreds of compounds, and on hydrolysis produced a large number of amino acids including racemic protein amino acids. Optical constants have been measured of many of the tholins, tholins produced from a condensed mixt
APA, Harvard, Vancouver, ISO, and other styles
2

Chen, Feng, Shengwei Liu, and Jiaguo Yu. "Efficient removal of gaseous formaldehyde in air using hierarchical titanate nanospheres with in situ amine functionalization." Physical Chemistry Chemical Physics 18, no. 27 (2016): 18161–68. http://dx.doi.org/10.1039/c6cp03037h.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chen, Aibing, Tiancong Zhao, Hui Gao, Limin Chen, Jinzhu Chen, and Yifeng Yu. "Titanate nanotube-promoted chemical fixation of carbon dioxide to cyclic carbonate: a combined experimental and computational study." Catalysis Science & Technology 6, no. 3 (2016): 780–90. http://dx.doi.org/10.1039/c5cy01024a.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Shi, Liang, Bohua Dong, Rongjie Gao, et al. "Hierarchical Fe3O4@titanate microspheres with superior removal capability for water treatment: in situ growth and structure tailoring via hydrothermal assisted etching." RSC Advances 5, no. 89 (2015): 73126–32. http://dx.doi.org/10.1039/c5ra06362k.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Arun, V., and K. R. Sankaran. "Efficient and Eco-Friendly Synthesis of Fluorenone Azines by Using Sulphated Titania Acid Catalyst." International Letters of Chemistry, Physics and Astronomy 58 (September 2015): 137–43. http://dx.doi.org/10.18052/www.scipress.com/ilcpa.58.137.

Full text
Abstract:
Conjugated unsymmetrical azines have been synthesized in the presence of acid catalyst sulphated-titania (TiO2-SO42-) from fluorenone hydrazone with substituted aldehydes and acetophenones by using mortar and pestle. The scope of present synthetic route avoid in solvents, simple operating method and shorter reaction time. Special feature of synthetic method is recyclable catalyst for all in reactions.
APA, Harvard, Vancouver, ISO, and other styles
6

Arun, V., and K. R. Sankaran. "Efficient and Eco-Friendly Synthesis of Fluorenone Azines by Using Sulphated Titania Acid Catalyst." International Letters of Chemistry, Physics and Astronomy 58 (September 2, 2015): 137–43. http://dx.doi.org/10.56431/p-un5562.

Full text
Abstract:
Conjugated unsymmetrical azines have been synthesized in the presence of acid catalyst sulphated-titania (TiO2-SO42-) from fluorenone hydrazone with substituted aldehydes and acetophenones by using mortar and pestle. The scope of present synthetic route avoid in solvents, simple operating method and shorter reaction time. Special feature of synthetic method is recyclable catalyst for all in reactions.
APA, Harvard, Vancouver, ISO, and other styles
7

Yan, Ai, Wen Yan Huang, Yuan Cai Lv, and Ming Hua Liu. "Preparation and Photocatalytic Activity of Laden SiO2/TiO2 Composite Photocatalyst." Applied Mechanics and Materials 84-85 (August 2011): 504–8. http://dx.doi.org/10.4028/www.scientific.net/amm.84-85.504.

Full text
Abstract:
SiO2/TiO2 photocatalyst was prepared by a sol-gel method applying tetrabutyl titanate as the precursor and cullets as the carrier. The optimal preparing conditions of the SiO2/TiO2 composite photocatalyst were optimized. The optimal conditions included 2:1 of the molar ratio of tetraethyl orthosilicate to tetrabutyl titanate, 3 load times, 600°C of calcinations temperature, 3 h of calcination time, 3 mL of the dosage of CH3COOH and 5:1 of the molar ratio of water to tetrabutyl titanate. The photodegradation percentage of methylene blue could reach 92.26% under the above optimal conditions. Mor
APA, Harvard, Vancouver, ISO, and other styles
8

Phonthammachai, N., J. Kim, and T. J. White. "Synthesis and performance of a photocatalytic titania-hydroxyapatite composite." Journal of Materials Research 23, no. 9 (2008): 2398–405. http://dx.doi.org/10.1557/jmr.2008.0290.

Full text
Abstract:
The photocatalytic degradation of methylene blue (MB) over a porous titania-hydroxyapatite (HAp) composite under ultraviolet radiation was studied. The catalyst was prepared by coating porous HAp with a titanium butoxide [Ti(OBu)4] sol at titania loadings of 17–49 wt%. Quantitative powder x-ray diffraction showed higher proportions of anatase as the calcination temperature increased from 500 to 800 °C due to crystallization of an amorphous precursor. The transformation of anatase to rutile was delayed until 900 °C, demonstrating the high thermal stability of the composite. Decomposition of HAp
APA, Harvard, Vancouver, ISO, and other styles
9

Bello, Roger H., Jacks P. Priebe, and Luiz AF Coelho. "Barium titanate‐based nanodielectrics of two chemically recyclable thermosets." Polymer International 68, no. 4 (2019): 700–713. http://dx.doi.org/10.1002/pi.5755.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Maafa, Ibrahim M., and Mohammad Ashraf Ali. "Enhanced Organic Pollutant Removal Efficiency of Electrospun NiTiO3/TiO2-Decorated Carbon Nanofibers." Polymers 15, no. 1 (2022): 109. http://dx.doi.org/10.3390/polym15010109.

Full text
Abstract:
A nanocomposite comprised of nickel titanate/titania nanoparticles decorated with carbon nanofibers (NiTiO3/TiO2-decorated CNFs) is successfully synthesized via electrospinning and further utilized for methylene blue (MB) photodegradation. The morphology, phase, structural and chemical composition of the nanocomposite is investigated via scanning electron microscope, X-ray diffraction and transmission electron microscope equipped with energy dispersive X-ray. A mathematical model is developed to predict the photocatalytic activity of the produced nanocomposite by considering parameters such as
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Titane – Recyclage"

1

Ayadh, Widad. "Étude du procédé de recyclage d’alliages de titane par fusion plasma (PAMCHR) pour application aéronautique." Electronic Thesis or Diss., Université de Lorraine, 2024. http://www.theses.fr/2024LORR0214.

Full text
Abstract:
Le procédé de recyclage de titane par plasma d'arc (PAMCHR) doit garantir une propreté inclusionnaire afin de satisfaire les normes de qualité aéronautique. Dans ce procédé, les creusets sont en cuivre refroidis à l'eau, et l'apport thermique est le plasma d'arc des torches. Les travaux de modélisation présentés dans ce manuscrit portent leur effort sur l'étape de fusion du procédé. Il correspond à l'étape d'entrée et de fusion de matière pour permettre son écoulement vers le creuset d'affinage. Une autre part importante du travail concerne la modélisation du comportement des inclusions au sei
APA, Harvard, Vancouver, ISO, and other styles
2

Chabert, Mickaël. "Recyclage et revalorisation de films de PET / PVDC par extrusion réactive à basse température." Thesis, Lyon 1, 2013. http://www.theses.fr/2013LYO10045.

Full text
Abstract:
Une voie originale de recyclage des films de PET / PVDC est proposée par leur transformation chimique avec des alcoxydes de titane par procédé d'extrusion réactive à l'état solide. Les réactions d'échanges entre ces composés organo-métalliques et le PET ont été mises en oeuvre à des températures entre 250 et 280° C à l'échelle du laboratoire et ont permis de segmenter les chaînes de PET, en de petits oligomères avec des températures de fusion basses, sur des temps de réaction très courts de l'ordre de quelques minutes. Ces oligomères peuvent être post-fonctionnalisés avec des diols. Le transfe
APA, Harvard, Vancouver, ISO, and other styles
3

Chabert, Mickaël. "Recyclage et revalorisation de films de PET / PVDC par extrusion réactive à basse température." Electronic Thesis or Diss., Lyon 1, 2013. http://www.theses.fr/2013LYO10045.

Full text
Abstract:
Une voie originale de recyclage des films de PET / PVDC est proposée par leur transformation chimique avec des alcoxydes de titane par procédé d'extrusion réactive à l'état solide. Les réactions d'échanges entre ces composés organo-métalliques et le PET ont été mises en oeuvre à des températures entre 250 et 280° C à l'échelle du laboratoire et ont permis de segmenter les chaînes de PET, en de petits oligomères avec des températures de fusion basses, sur des temps de réaction très courts de l'ordre de quelques minutes. Ces oligomères peuvent être post-fonctionnalisés avec des diols. Le transfe
APA, Harvard, Vancouver, ISO, and other styles
4

Blanc, Toinou. "Fabrication additive par dépôt laser direct de TA6V : étude expérimentale dans des régimes de forte productivité, modèles de comportement et recyclage de la poudre." Thesis, Paris Sciences et Lettres (ComUE), 2017. http://www.theses.fr/2017PSLEM047.

Full text
Abstract:
La fabrication additive, ou impression 3D, regroupe plusieurs procédés permettant d’obtenir des pièces par empilement de couches de matière à partir de modèles CAO, sans outillage spécifique. En l’espace d’une dizaine d’années, les procédés additifs ont vu leur notoriété croître bien plus rapidement que la rentabilité de leurs applications industrielles.En effet, ces technologies doivent encore gagner en maturité, en particulier pour les applications métalliques. C’est l’enjeu du projet FUI-9 FALAFEL dans lequel s’inscrit cette thèse, menée en partenariat avec plusieurs acteurs industriels et
APA, Harvard, Vancouver, ISO, and other styles
5

Vinson, Pierre. "Fusion sélective par laser de lits de poudre : Étude sur le recyclage de la poudre et détection de défauts au cours de la fabrication par imagerie thermique." Thesis, Paris, ENMP, 2015. http://www.theses.fr/2015ENMP0068.

Full text
Abstract:
La fabrication directe et additive regroupe un ensemble de technologies de mise en forme des matériaux en rupture avec les procédés conventionnels. L'industrie aéronautique et aérospatiale s'intéresse fortement à ces nouveaux procédés, dont la fusion sélective par laser de lits de poudre métallique (SLM). Cette thèse présentera les enjeux de la fabrication additive ainsi que certains procédés. Une étude bibliographique a été menée sur deux alliages aéronautiques utilisés dans ces travaux : l'alliage de titane TA6V et le superalliage base nickel Nimonic 263. Les travaux présentés dans ce rappor
APA, Harvard, Vancouver, ISO, and other styles
6

Pasternak, Nicolas. "Synthèses de matériaux mésoporeux et nanoparticulaires plus écologiques à base de silicium et titane." Thesis, Cergy-Pontoise, 2017. http://www.theses.fr/2017CERG0911.

Full text
Abstract:
Les matériaux d’oxyde de silice et de titane sont présents dans de nombreux domaines (chimie, environnemental, médical, pharmaceutique, etc.). Le principal problème de ces matériaux concerne les forts coûts financier et environnemental de leur synthèse. Dans ce travail de recherche, l’objectif fut de résoudre cette problématique. Ainsi, une nouvelle synthèse d’oxyde de silice a été élaborée. Ces nanostructures ont été analysées par les méthodes de caractérisation classique en sciences des matériaux (Adsorption volumétrique N2, Analyse Thermogravimétrique (ATG), …). Les propriétés viscoélastiqu
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Titane – Recyclage"

1

Borgogna, Alessia, Gaetano Iaquaniello, Annarita Salladini, Emanuela Agostini, and Mirko Boccacci. "Chemical Carbon and Hydrogen Recycle through Waste Gasification: The Methanol Route." In Gasification [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.98206.

Full text
Abstract:
A large amount of valuable Carbon and Hydrogen is lost in the disposal of the non-recyclable fraction of Municipal Solid Waste (MSW) – particularly unsorted waste fraction and plastics residue from mechanical recycle process. The waste-to-chemical technology allows to exploit the components entrapped in the non-recyclable waste by converting it into new chemicals. The core of waste-to-chemical technology is the gasification process, which is designed to convert waste into a valuable syngas to be used as example for methanol production. Waste to methanol schemes allow to achieve significant environmental and economic benefits, which can be further intensified within the scenario of increasing share of renewable energy.
APA, Harvard, Vancouver, ISO, and other styles
2

Tiancheng Wei, Wei, Yu Sun, and Eunkyoung Shim. "Progress of Recycled Polyester in Rheological Performance in Molding, and Economic Analysis of Recycled Fibers in Fashion and Textile Industry." In Next-Generation Textiles [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.103864.

Full text
Abstract:
In textiles, in particular wearable technology structured, battery-illuminated electronic fabrics are moving toward to both electrical and esthetic aspects of printed LED (PLED) textiles. It is on one dimension that have had questioned an economic resolution of extensional methods as for battery-charged interior materials, and also has gained a more general questions on how to develop its recycle both yarn and fiber as traditional raw goods in together with any recyclable electronic parts or graphene, carbon nanotube contained components with that textile materials. Furthermore, recyclable assembled electronic parts back to the renewable materials are continuous moving in the low-energy, high-reusable rate evaluation in the lifecycle assessment (LCA) of them. Specifically, during the de-sulfurization and decoloring in the post-production processing in the quick removal of active carbon fiber or nanoparticle coating on surface of fiber-porous geo-matrix could advance the renewing production efficiency. In assumption of low-energy and high-conductible transformation from off-market polyester with dyes or metallic yarns for polyester in e-textiles, recyclable conductive graphene/microfibers/composites are articulated, as far as industrial lifecycle management of braided, fibers, and ultra-high-density polyethylene has impeccable performance in the high mechanical property, medium rheological expansion over molding process, and high-yield strength as in the following sustainability in the wearable garment.
APA, Harvard, Vancouver, ISO, and other styles
3

Roy, Amrita, Kasilingam Rajkumar, and Bharat Kapgate. "Crumb Rubber Modified Asphalt: Fundamentals to Recent Developments." In Asphalt Materials - Recent Developments and New Perspective [Working Title]. IntechOpen, 2024. http://dx.doi.org/10.5772/intechopen.1004314.

Full text
Abstract:
Accumulation of polymeric solid wastes is a matter of distress and concern in the modern era. Plastic wastes are easier to recycle than rubbers, especially composite products like tires are very difficult to recycle. Finding sustainable end-of-life solutions for waste rubber products is crucial at present. The use of ground rubber, popularly known as crumb rubber obtained from the shredding of waste rubber goods in the construction of road pavements is one of the best possible ways to recycle rubber. About a billion end-of-life (ELT) tires are globally discarded every year, yet the use of crumb rubber generated from these tires in road construction is still negligible. The addition of crumb rubber not only permits the consumption of a significant amount of waste rubber but also provides numerous benefits to asphalt road pavement. Crumb rubber improves the rutting resistance, fatigue cracking and durability of roads. Rubberized asphalt roads also exhibit reduced traffic noise and increased driving safety. Though there are some limitations of crumb rubber as an additive, such as phase separation and poor workability, recent technical advancements are finding ways to overcome them. Further development of this technology is crucial for the establishment of a sustainable and circular economy.
APA, Harvard, Vancouver, ISO, and other styles
4

Kilivelu, Ganesan. "Perspective Chapter: Applications of Novel Ionic Liquids as Catalyst." In Industrial Applications of Ionic Liquids [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.108142.

Full text
Abstract:
Ionic liquids have much interesting attention in the area of biomedical and it’s an alternative to traditional organic solvents owing to their unique chemical, physical properties and environmentally eco-friendly catalytic responses. Ionic liquids have distinct properties like tunability that allows their physical and chemical behaviors to be changed as desired by changing the organic cations with inorganic anions or inorganic cations with organic anions or both cation and anion from organic moieties. Most of the organic reactions are carried out with assistance of catalyst, usually commercially available catalyst are very expensive, more hydroscopic in nature, thermally unstable and very difficult to recycle them but ionic liquids are acted as potential Lewis acidic behaviors, thermally stable, easily recycle inexpensive compared to commercial catalyst and easy to prepare electrically neutral organic cation which are loosely bind with inorganic anions, and organic (pyridinium/imidazolium/piperidinium) cation could be easily accelerate (or) activate the functional group for most of the organic reactions. Hence, ionic liquids plays a vital role in modern organic synthetic field and may be inevitable in future research.
APA, Harvard, Vancouver, ISO, and other styles
5

A. Shebl, Yehia. "Reverse Osmosis in Industrial Wastewater Treatment Units." In Desalination - Ecological Consequences [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.110680.

Full text
Abstract:
The MENA region faces a severe water crisis, prompting governments to take action by improving irrigation methods, treating and reusing sewage and agricultural wastewater, and issuing restrictions regulating industrial wastewater discharge. As a result, many large factories have established industrial wastewater treatment plants to recycle water, reduce reliance on external sources, comply with environmental regulations, and implement MLD or ZLD principles. This chapter will focus on industrial wastewater treatment using reverse osmosis (RO) membranes. It will cover the treatment of various contaminants such as nitrogen, phosphorus, COD, BOD, TOC, and heavy metals. It will discuss different treatment methods and technologies to produce reusable water while achieving MLD and ZLD principles.
APA, Harvard, Vancouver, ISO, and other styles
6

Jose Alguacil, Francisco, and Jose Ignacio Robla. "Arsenic and Biosorption." In Arsenic in Environment - Sources, Implications and Remedies [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.1001315.

Full text
Abstract:
Arsenic, either in (III) or (V) oxidation states forms, is a hazardous elements to humans, thus its removal from aqueous environments is of the utmost priority in the countries where this problem arises. From the various separation technologies, the removal f arsenic via biosorption processing attracted an interest, because besides the removal of the element, allows the recycle materials that in many cases are considered as wastes. The present chapter reviewed the most recent proposals (2022 year) about the use of biosorbents in the removal of this toxic element. Arsenic, either in (III) or (V) oxidation states forms, is a hazardous elements to humans, thus its removal from aqueous environments is of the utmost priority in the countries where this problem arises. From the various separation technologies, the removal f arsenic via biosorption processing attracted an interest, because besides the removal of the element, allows the recycle materials that in many cases are considered as wastes. The present chapter reviewed the most recent proposals (2022 year) about the use of biosorbents in the removal of this toxic element.
APA, Harvard, Vancouver, ISO, and other styles
7

Saint-Fort, Roger. "Surfactants and Their Applications for Remediation of Hydrophobic Organic Contaminants in Soils." In Surfactants [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.100596.

Full text
Abstract:
Soil contaminated with ubiquitous hydrophobic organic contaminants (HOCs) is a worldwide recurring concern arising from their indiscriminate disposal, improper management, and accidental spills. A wide range of traditional remedial strategies have been the common practice. However, these treatment methods have become cost prohibitive, not environmental friendly, and less accepted by society. Surfactant-enhanced remediation technology represents a cost-effective and green technology alternative to remediate such contaminated sites. Surfactant remediation technologies are conducted in-situ or ex-situ as two broad categories, or in combination. Among these technologies are soil flushing, washing, phytoremediation, and bioremediation. More applied research continues to quantify the efficiency of surfactant-enhanced mass transfer phase using a single surfactant solution while their binary blends to remove mixed HOCs in soils are also a focus of interest for research. There is a great potential to develop novel synthetic and biosurfactants that will exhibit higher biodegradability, less toxicity, higher removal efficiency, more economical and more recyclable. This work thus provides a review of the applications and importance of surfactant-enhanced remediation of soil contaminated with HOCs. Relevant environmental factors, soil properties, surfactant chemistry, mechanisms, mass transfer phase, and field designs are summarized and discussed with purposes of providing greater context and understanding of surfactant-enhanced remediation systems.
APA, Harvard, Vancouver, ISO, and other styles
8

Naor, Michael. "Tesla’s Circular Economy Strategy to Recycle, Reduce, Reuse, Repurpose and Recover Batteries." In Recycling - Recent Advances [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.107256.

Full text
Abstract:
The purpose of this research is to explore how Tesla is capable to materialize the circular economy futuristic vision. Specifically, it explains how batteries are recycled, reduced, reused, repurposed, and recovered in order to preserve raw materials and dimmish toxic waste disposal. Tesla extends traveling distance by supercharging stations and repurpose degraded batteries for second-life applications to energize home appliances with its solar panels. Tesla intends to substantially diminish the costs of battery production while increasing range by developing an innovative 4680 tab-less cobalt-free battery. An insight emerging from the study is that the fundamental principles upon the operations management field was established such as the concept of focused factory and Goldratt’s theory of constraints stay valid and are applicable towards establishing sustainable manufacturing process at the 21st century.
APA, Harvard, Vancouver, ISO, and other styles
9

P. Smith, Daniel, and Nathaniel T. Smith. "Solanum tuberosum Cultivation Using Nitrogen Recovered from Local Wastewater." In Solanum tuberosum - a Promising Crop for Starvation Problem [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.98554.

Full text
Abstract:
This chapter presents an approach to recover nitrogen from human waste-water at local-scale for cultivation of Solanum tuberosum (potato) as food crop. Nitrogen capture is by ion exchange of ammonium (NH4+) onto zeolite, a natural low cost mineral which is available worldwide. A coupled process is described in which wastewater ammonium is sorbed to granular zeolite, biologically extracted (desorbed), and used to support Solanum tuberosum growth in fill-and-drain or irrigation cultivation. The system employs separate components to optimize conditions for ammonium sorption (anaerobic ion exchange), desorption (aerobic bioextraction), and cultivation (flexible timing of water and nitrogen supply and nutrient recycle). System architecture provides a low cost and readily implemented system for highly efficient nitrogen capture and incorporation into potato tuber. The nitrogen recycle system enables sustainable local-scale intensification of Solanum tuberosum production and enhanced food security through use of a reliable local nutrient supply. Metrics are presented for per capita tuber production, land area, and productivity. A system design is presented with a path forward for demonstration and development.
APA, Harvard, Vancouver, ISO, and other styles
10

Margaret Popoola, Bukola. "Biodegradable Waste." In Recycling - Recent Advances [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.107910.

Full text
Abstract:
Biodegradable wastes are waste materials easily degraded or broken down naturally by factors such as biotic (bacteria, fungi, plants, animals, etc.) and abiotic (pH, temperature, oxygen, humidity, etc.). This process enables complex substances to be broken down into simpler organic compounds which subsequently fade into the soil. This is a natural process that could be prolonged or rapid and poses little risks to the environment. These waste materials could be termed green waste; including food waste, paper waste, and biodegradable plastics such are found in municipal solid waste. Other examples of biodegradable wastes include sewage, manure, sewage sludge, human waste, waste from various slaughterhouses, hospital waste, dead animals, and plants. Biodegradable waste could be said to be recyclable or reused; furthermore, bio-waste recycling may also directly contribute to climate protection. They are generally known as useful waste. Recycling is one of the current waste management strategies having great benefits for the environment.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Titane – Recyclage"

1

Ungur, Cristina. "Posibilități de implementare a practicilor internaționale în dezvoltarea afacerilor circulare din Republica Moldova." In Conference title: Economic growth in the conditions of globalization: International Scientific-Practical Conference, XVIth edition. National Institute for Economic Research, 2023. http://dx.doi.org/10.36004/nier.cecg.iii.2022.16.9.

Full text
Abstract:
The implementation of circular business models becomes imperative under the conditions of the energy crisis that appeared at the European level this year. Governments and the business environment are required to look for urgent solutions for the transition to an economy based on alternative energy resources. In this context, taking over successful practices and sharing experience become the fastest methods to adopt circular business models. The purpose of this study was to analyze the experience of other states in the development of successful circular businesses and to identify the possibilit
APA, Harvard, Vancouver, ISO, and other styles
2

Smits, Joris, Laurent Ney, Thijs van Roosbroeck, and Tom Spaargaren. "The circular arch viaduct: reduce, re-use & recycle in practice." In IABSE Congress, Ghent 2021: Structural Engineering for Future Societal Needs. International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/ghent.2021.0206.

Full text
Abstract:
<p>This paper describes a proposal for a Circular Arch Viaduct. The proposal was submitted for a competition for innovation launched by Rijkswaterstaat, the Dutch Directorate-General for Public Works and Water Management, under the title ‘SBIR (Small Business Innovation Research) Circular Viaducts and Bridges’. The authors of this paper are part of a consortium consisting of BESIX NL and Ney & Partners. They have currently rounded up the first phase of the competition (Figure 1).</p><p>Our society has become accustomed to the permanent availability of raw materials; o
APA, Harvard, Vancouver, ISO, and other styles
3

Smits, Joris, Laurent Ney, Thijs van Roosbroeck, and Tom Spaargaren. "The circular arch viaduct: reduce, re-use & recycle in practice." In IABSE Congress, Ghent 2021: Structural Engineering for Future Societal Needs. International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/ghent.2021.0206.

Full text
Abstract:
<p>This paper describes a proposal for a Circular Arch Viaduct. The proposal was submitted for a competition for innovation launched by Rijkswaterstaat, the Dutch Directorate-General for Public Works and Water Management, under the title ‘SBIR (Small Business Innovation Research) Circular Viaducts and Bridges’. The authors of this paper are part of a consortium consisting of BESIX NL and Ney & Partners. They have currently rounded up the first phase of the competition (Figure 1).</p><p>Our society has become accustomed to the permanent availability of raw materials; o
APA, Harvard, Vancouver, ISO, and other styles
4

Almaazmi, Juma, Muhammad Arianto, Salem Almenhali, et al. "Maximizing Profitability and Sustainability, Minimizing Carbon Footprint in Gas Recycle Developments by Optimizing Gas Injection Parameters to Conform to Dynamic Changes in Reservoir Performance." In ADIPEC. SPE, 2022. http://dx.doi.org/10.2118/211059-ms.

Full text
Abstract:
Abstract Technical Category 41. Energy Efficiency and Sustainability Abstract Title Maximizing Profitability and Sustainability, Minimizing Carbon Footprint in gas Recycle Developments by Optimizing gas Injection Parameters to Conform to Dynamic Changes in Reservoir Performance Objectives/Scope The Discharge Pressure Optimization project was initiated as a collaborative effort between ADNOC Onshore and ADNOC Gas Processing in order to assess the feasibility of lowering the re-injection compressor's discharge pressure. Lowering the discharge pressure has immediate cost and environmental benefit
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Titane – Recyclage"

1

Liu, Haiqing, Nelson S. Bell, Benjamin B. Cipiti, Lewis, Tom Goslee,, Dorina Florentina Sava, and Tina Maria Nenoff. Functionalized ultra-porous titania nanofiber membranes as nuclear waste separation and sequestration scaffolds for nuclear fuels recycle. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1096948.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography