Relevant bibliographies by topics / Tool magazine / Journal articles
To see the other types of publications on this topic, follow the link: Tool magazine.

Journal articles on the topic 'Tool magazine'

Author: Grafiati
Published: 4 June 2021
Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Tool magazine.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Li, Guofa, Yanbo Wang, Jialong He, Tianwei Hou, Le Du, and Zhenhua Hou. "Fault Forecasting of a Machining Center Tool Magazine Based on Health Assessment." Mathematical Problems in Engineering 2020 (April 9, 2020): 1–10. http://dx.doi.org/10.1155/2020/5796965.

Full text
Abstract:
A tool magazine is one of the key functional components of machining centers with frequent faults. The reliability level of a tool magazine directly affects the reliability level of the machining center. After establishing a reliability test bench and a prognostic and health management system for a tool magazine, a novel fault-forecasting method for machining center tool magazines based on health assessment is proposed. First, the health status of each tool magazine subcomponent is determined using the grey clustering method. Second, the weight of each tool magazine subcomponent is determined using an entropy weight method. Third, the health status of the tool magazine is evaluated via fuzzy comprehensive evaluation. If the tool magazine exhibits an unhealthy status, then the subcomponent with the worst health status is selected for fault forecasting. In addition, standardized treatment, stationarity test, and differential processing are conducted separately on the raw performance indicator data of the worst subcomponent. Finally, the performance indicators of the worst subcomponent are forecasted with the constructed autoregressive moving average model. Using tool-falling failure as an example, the forecasted and experimental tool-pulling forces are compared and analyzed, and the prediction accuracy of the proposed method is verified.
APA, Harvard, Vancouver, ISO, and other styles
2

Sheng, Zhong Qi, Hua Long Xie, Zhi Wei Xu, and Peng Li. "Design System Development of Tool Magazine for CNC Machine Tools." Applied Mechanics and Materials 16-19 (October 2009): 155–59. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.155.

Full text
Abstract:
As an important part of CNC machine tools and machining center, automatic tool changer is the basis to realize continuous processing of multiple machining operations. The design system development of tool magazine is an engineering of complex system. Based on the secondary development technology of UG, this paper developed the design and management system of tool magazine and realized the standardization and the process of design procedure. After introducing the basic idea of design system development, this paper presented function modules and design workflow of tool magazine respectively. The management system for tool magazine was given next. UG-based development of tool magazine for CNC machine tools can meet the design need and improve the design quality effectively.
APA, Harvard, Vancouver, ISO, and other styles
3

Niemi, E. "Optimal tool magazine operation. Part 1: Rotating magazines with unbuffered tool change." International Journal of Advanced Manufacturing Technology 22, no. 9-10 (November 1, 2003): 720–26. http://dx.doi.org/10.1007/s00170-003-1597-y.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Niemi, E. "Optimal tool magazine operation. Part 2: rotating magazines with buffered tool change." International Journal of Advanced Manufacturing Technology 24, no. 7-8 (May 12, 2004): 567–72. http://dx.doi.org/10.1007/s00170-003-1598-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Lu, Xiao Hong, Peng Zhuo Han, Wen Yi Wu, and Wei Jie. "Reliability Evaluation of Circular Tool Magazine and Automatic Tool Changer." Advanced Materials Research 630 (December 2012): 245–48. http://dx.doi.org/10.4028/www.scientific.net/amr.630.245.

Full text
Abstract:
Tool magazine and automatic tool changer is important parts to fulfill the machining center tool reserve and automatic changing of the spindle tool. The reliability of them directly affects the performance of the host. But recently there are no researches on the reliability evaluation methods, so considering this situation, the reliability evaluation researches on CNC machine tools and their main parts at home and abroad are analyzed and concluded. Combining the collected failure data of the circular tool magazine and automatic tool changer, use MTBF (Mean Time between Failures), MTTR (Mean Time To Repair) and the inherent availability index to realize the reliability evaluation of the circular tool magazine and automatic tool changer. Thus put forward a method to study the reliability evaluation of circular tool magazine and automatic tool changer.
APA, Harvard, Vancouver, ISO, and other styles
6

Deng, Chang Qi, and Bin Li. "The Application and Development of Automatic Tool Selection in Tool Magazine Based on PLC." Advanced Materials Research 139-141 (October 2010): 1959–62. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.1959.

Full text
Abstract:
In the machine manufacturing industry, CNC machine tools possess many advantages and have gradually become the leading machine tools to replace the ordinary machine tools. According to their processing usages, they can be divided into two kinds: general CNC and NTC. With the automatic tool change device consisting of tool magazine and mechanical arm, the latter can complete the most, if not all, processings of workpieces in a clamping. According to the instruction to select tools from the digital control system, the tools in the tool magazine can be located to the position for tool change, which is called automatic tool selection. Automatical tool selection can be implemented at random and sequentially. This paper focuses on random tool selection in ATC tool magazine controlled by Mitsubishi FX2N PLC series.
APA, Harvard, Vancouver, ISO, and other styles
7

Lu, Xiao Hong, Peng Zhuo Han, and Wen Yi Wu. "Reliability Evaluation of Chain-Type Tool Magazine and ATC." Applied Mechanics and Materials 271-272 (December 2012): 461–65. http://dx.doi.org/10.4028/www.scientific.net/amm.271-272.461.

Full text
Abstract:
As the tool magazine and automatic tool changer (ATC) are the important function units to reserve and change tools for the machining center, the tool-changing rate affects their reliability life which directly influences the performance level of the machining center. However, the reliability of the tool magazine and ATC has not yet got a reasonable evaluation index. Directing at the features of the tool magazine and ATC system, the mean tool change numbers between failures evaluation index is proposed, which is used to calculate the mean time to repair and estimate the collected failure data of the chain-type tool magazine and ATC. It can be seen that the tool magazine with continuous tool-changing adopts the mean tool change numbers between failures as the reliability evaluation index.
APA, Harvard, Vancouver, ISO, and other styles
8

Deng, Chang Qi, and Bin Li. "The Research and Development of NTC Automatic Tool Selection Based on Aucol." Advanced Materials Research 383-390 (November 2011): 4090–95. http://dx.doi.org/10.4028/www.scientific.net/amr.383-390.4090.

Full text
Abstract:
This paper analyses the performance characteristics of NTC magazine, introduces the mode and characteristic of tool selection, discusses the details of the function and the design of the software of the control system. It also utilizes the automatic tool selection of PLC magazine set in the Italian FIDIA CNC and introduces the chart flow of automatic tool selection system. By adopting the brand new Aucol to realize the automatic tool selection program in the magazine, machine tools can improve their productivity in reliability and maintenance. The utilization in production indicates a good control result, which provides an approach of technological innovation for factories.
APA, Harvard, Vancouver, ISO, and other styles
9

Wilding, Raelene. "Locating Editorials and Advertising in Wedding Magazines." Media International Australia 119, no. 1 (May 2006): 74–84. http://dx.doi.org/10.1177/1329878x0611900108.

Full text
Abstract:
Unlike other magazines, few people subscribe to wedding magazines and, as most are annual publications, their presence on the publishing landscape is relatively intermittent and unobtrusive. Nevertheless, these publications provide a rich context for examining intersections between advertisements and editorials. In this paper, I draw on ethnographic and textual analysis of wedding magazines produced in Australia. I argue that the distinction between advertisement and editorial is not a useful analytical tool in this context. This is because the vast majority of advertisements and editorial pages in a wedding magazine appear almost identical: page after page of glossy photographs of wedding dresses. Rather, what is striking is the manner in which the magazine editors and advertising clients, in their discussions as each magazine issue is produced, negotiate the fine distinctions they perceive between advertising and editorial content. At stake in these negotiations is not just the economic success of both editor and client, but also their reputations as expert manipulators of symbolic representations.
APA, Harvard, Vancouver, ISO, and other styles
10

Kusumayanthi, Susie. "WRITING AND PUBLISHING A MAGAZINE." JELA (Journal of English Language Teaching, Literature and Applied Linguistics) 1, no. 1 (April 30, 2019): 6–14. http://dx.doi.org/10.37742/jela.v1i1.5.

Full text
Abstract:
Students who write a piece of writing need a perfect tool to engage themselves to write even when they are not interested in writing at all. One of the perfect tools to engage the students in writing process is creating a magazine as it offers students to publish their writing. Publication, according to Lange (1992) is a great tool to engage students to write, involving even those who do not consider themselves to be writers. This paper explores the implementation of writing and publishing a magazine in a writing class in one of the universities in Bandung. The class applies project-based learning as its teaching method.
APA, Harvard, Vancouver, ISO, and other styles
11

Obreja, Claudiu, Gheorghe Stan, Dragoș Andrioaia, and Marian Funaru. "Design of an Automatic Tool Changer System for Milling Machining Centers." Applied Mechanics and Materials 371 (August 2013): 69–73. http://dx.doi.org/10.4028/www.scientific.net/amm.371.69.

Full text
Abstract:
In the field of manufacturing processes it is observed that the trend is to produce more and more fast, efficiently parts with high complexity, which involves using a high number of tools in the machining process. One of the main solutions for high speed and efficient manufacturing is based on the full automation of the entire manufacturing process. The automatic changing of the tools involved in the manufacturing process is carried out by the automatic tool changing mechanism, thus the auxiliary non-productive time consumed with the tool change is highly minimized. In this paper we present a novel automatic tool changer which is both simple and compact, and any milling machining center provided with chain or disc tool magazine can be equipped with. Also by adopting the use of this tool changing mechanism other subassemblies of the tool changing system, such as the tool transfer mechanism and the waiting position, are substituted by this changing mechanism. The auxiliary movements needed to bring the tool from the magazine into the waiting position are overlapped with the machining time, so that the total time for exchanging the tool in the spindle with the tool from the magazine is minimized.
APA, Harvard, Vancouver, ISO, and other styles
12

Stellarosa, Yolanda, Sandra Jasmine Firyal, and Andre Ikhsano. "PEMANFAATAN YOUTUBE SEBAGAI SARANA TRANSFORMASI MAJALAH HIGHEND." LUGAS Jurnal Komunikasi 2, no. 2 (December 31, 2018): 59–68. http://dx.doi.org/10.31334/ljk.v2i2.263.

Full text
Abstract:
The emergence of a variety of social media makes it easier for people to find and obtain information. One of the social media that can provide information in the form of audio and visual without any duration limit is YouTube.YouTube HighEnd Magazine is HighEnd magazine's YouTube channel used as a transformation tool for the magazine. This research uses descriptive qualitative method. The purpose of this study is to determine the utilization of social media YouTube as a tool of transformation of HighEnd magazine. Researcher interviewed three different speakers that have different job desks, Larasati Oetomo as digital media officer, Lysia Jessica as editor in chief, and Johan Jang as social media expert. This research uses new media theory and describes media utilization strategies to find out how Highend magazine utilizes YouTube’s social media. This research proves that HighEnd has utilized YouTube social media with six characteristics of New Media as a means of transformation of print media, has also developed strategies in utilizing YouTube based on Audience, Mission, Goal, and Content Strategy.
APA, Harvard, Vancouver, ISO, and other styles
13

LEVITIN, G., and J. RUBINOVITZ. "Algorithm for tool placement in an automatic tool change magazine." International Journal of Production Research 33, no. 2 (February 1995): 351–60. http://dx.doi.org/10.1080/00207549508930153.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Rao, Ming Ze. "The Control Design of the Chain Magazine Test Bench." Applied Mechanics and Materials 721 (December 2014): 330–33. http://dx.doi.org/10.4028/www.scientific.net/amm.721.330.

Full text
Abstract:
The stable operation of the chain magazine which is important functional parts of the machining centers affects the processing efficiency directly, requiring test bench and related experiments in progress for the chain magazine performance parameters. We design the hardware and software and complete PLC chain magazine test bench based on the control and experimental testing requirements in the analysis of specific institutions and chain magazine movement principle. PLC is the core of the test bench which can achieve the operation of the magazine and the control automatic tool changer. The PLC program according to the experimental requirements can control tool magazine and automatic tool changer different motion process for related test. PC can achieve magazine movement simulation, monitoring the process of the tool changing, as well as recording and analysis of test data. The Anti-interference cabinet of the test bench ensure the stable operation of control system. The tests proved that PLC-based test bench able to meets the test requirements and complete the default action for a series of related tests with simple control, stable operation and scalability.
APA, Harvard, Vancouver, ISO, and other styles
15

Rydsjö, Celia Aijmer, and AnnKatrin Jonsson. "Making It News: Money and Marketing in the Expatriate Modernist Little Magazine in Europe." Journal of European Periodical Studies 1, no. 1 (July 5, 2016): 71. http://dx.doi.org/10.21825/jeps.v1i1.2578.

Full text
Abstract:
This article deals with practical and economic aspects of expatriate little magazine production and should be seen as furthering the understanding of the economic and promotional underpinnings of modernist cultural expression in the 1920s and 30s. In particular, the article indicates to what extent literary ambitions and idealistic actions associated with the editing of a little magazine on the European continent intermingled with material and promotional concerns. Moreover, by focusing on expatriate little magazines, the article emphasizes the significance of geographical location for both practical and marketing purposes. Marketing ambitions blended with tactics for gaining legitimacy, and promotional language provided a valuable tool for advancing sales as well as cultural credibility. One important way of catering to economic interests while upholding literary ambitions was to incorporate the magazines into the flow of news, suggesting an affinity with publication types dedicated to hot topics, large readerships, and the journalistic virtue of presence on the scene. Designating the little magazine and its literary content as news therefore complicates and troubles the boundary between elitist and popular culture.
APA, Harvard, Vancouver, ISO, and other styles
16

VanHop, N. "The Tool-Switching Problem With Magazine Capacity and Tool Size Constraints." IEEE Transactions on Systems, Man, and Cybernetics - Part A: Systems and Humans 35, no. 5 (September 2005): 617–28. http://dx.doi.org/10.1109/tsmca.2004.832824.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Zhang, Yue Ming, Bo Jin Yang, Zhe Wang, Hong Ming Mu, and Yu Yang. "The Research of the Tool Magazine Control System Based on PLC." Advanced Materials Research 912-914 (April 2014): 1017–21. http://dx.doi.org/10.4028/www.scientific.net/amr.912-914.1017.

Full text
Abstract:
The tool magazine and automatic tool changer are important functional components, which actual performance affects the efficiency of machining center directly. BT50-32L produced by ZhongHuan (Group) is the research object in this paper, it introduces the application of the control system from aspects of the design of overall program, the control of tool magazine and automatic tool changer. The core of the tool magazine control system is PLC, which can select the nearest tool and achieve the control of tool position, the flip of tool holder and the tool changer of manipulator during the operation. The communication of PC HMI and PLC achieve the simulation and control of the operational status. This system is certified to meet the application requirements with the stable performance, simple structure, easy operation and the rapid and accurate action.
APA, Harvard, Vancouver, ISO, and other styles
18

Jia, Zhen Yuan, Jun Zou, Xiao Hong Lu, and Zong Jin Ren. "Design and Dynamic Deformation Analysis for Elastic Cutter Fixture of Tool Grasper Mechanism on Disc Type Tool Magazine with Double Loop Cutters." Applied Mechanics and Materials 494-495 (February 2014): 341–44. http://dx.doi.org/10.4028/www.scientific.net/amm.494-495.341.

Full text
Abstract:
Double loop cutters arrangement can settle the contradiction between rotational inertia of the tool magazine and the dimension limitation of the cutter head effectively, and increase the store of tools. Disc type tool magazine with double loop cutters arrangement is designed and researched. The spring steel 65Mn is used to manufacture elastic cutter fixture as the holding device for its inner and outer loop tools. The dynamic deformation of elastic cutter fixture is discussed. The entire geometric movement process of elastic cutter fixture from being opened by the tool holder to accomplishing the whole action is analyzed. The effect and trend of inner stress caused by geometric deformation are studied. Furthermore, the force condition in each part of tool fixture can be calculated, thus predicting the motion stability and reliability of the elastic cutter fixture, and providing theory references for the design of elastic cutter fixture.
APA, Harvard, Vancouver, ISO, and other styles
19

於, 阳. "Reliability Optimization Design of Tool Magazine & Manipulator." Mechanical Engineering and Technology 09, no. 06 (2020): 553–61. http://dx.doi.org/10.12677/met.2020.96059.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Yan, Yi Long, Yan Chao Yin, Zhuang Xiong, and Lei Wu. "The Simulation and Optimization of Chain Tool Magazine Automatic Tool Change Process." Advanced Materials Research 834-836 (October 2013): 1758–61. http://dx.doi.org/10.4028/www.scientific.net/amr.834-836.1758.

Full text
Abstract:
In order to ensure processing quality and validate the accurary of macro program. VERICUT software was often used to achieve five-axis gantry milling machine automatic tool changer (ATC) of the whole process simulation.The results show that the validity of macro program is verified by NC simulation and the efficiency of NC simulation is improved. It provides a guide for the modeling and simulation of multi-axis CNC machine tools.
APA, Harvard, Vancouver, ISO, and other styles
21

Koulamas, Christos P. "Design of tool magazine and operational areas for a multi-tool machine." European Journal of Operational Research 63, no. 2 (December 1992): 240–53. http://dx.doi.org/10.1016/0377-2217(92)90029-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Susanti, Nurmalia, Nana Supriatna, and Yeni Kurniawati Sumantri. "Lekra Vs Manikebu: Perlawanan Majalah Sastra terhadap Politik Kebudayaan Pemerintah Masa Demokrasi Terpimpin (1961-1964)." FACTUM: Jurnal Sejarah dan Pendidikan Sejarah 8, no. 1 (September 23, 2019): 97–112. http://dx.doi.org/10.17509/factum.v8i1.20121.

Full text
Abstract:
This research emerged from the author’s interest in cultural magazines’ involvement regarding a political situation in Indonesia. The main problem discussed “how was the Sastra magazine’s resistance against cultural politics of the Leaded Democracy periodin 1961-1964?” The main problem elaborated into four research questions, namely: (1) how was the background of Sastra magazine’s publication?; (2) how was the culture concept from Sastra magazine’s perspective?; (3) how was the Sastra magazine’s efforts to defended its perspective in addressing anti-mainstream cultural concepts?;and (4) how was the impact received by the Sastra magazine due to maintaining the anti-mainstream cultural concept?. The method used in this study is the historical method which is divided into four stages, such as heuristics, criticism, interpretation, and historiography. Based on the study, it can be explained that Sastra published in 1961 was a continuation of Kisah, the publication of this magazine has acted as aneffort to provide good reading for the community. In its development, Sastra has its own view of the cultural concept of the Leaded Democracy era, that Indonesian culture is an honest culture that was born from the conscience of the people based on humanity, not based on the slogans of party interests. That was considered not following the spirit of revolution that had not been completed at the time, which led to attacks from various parties, especially from the Lekra. Sastra maintained its stance, one of which was through its involvement in the Manifes Kebudayaan, which was a statement of a group of artists regarding Indonesia’s national culture. But not even a year, theManifes Kebudayaan declared forbidden by President Sukarno because he considered competing with the Indonesian Political Manifesto. The prohibition statement became a trigger for Sastra to disappear from circulation because it was labelled as a tool for the reactionaries.
APA, Harvard, Vancouver, ISO, and other styles
23

Hu, Ye, Zhao Jun Yang, Xiao Ming Zeng, Peng Fei Song, Yu Peng Ma, Yang Wang, and Qiao Lou. "Fault Detection System and Reliability Analysis for Chain-Type Tool Magazine." Advanced Materials Research 542-543 (June 2012): 941–44. http://dx.doi.org/10.4028/www.scientific.net/amr.542-543.941.

Full text
Abstract:
By analyzing the structure features and tool changing process of a large-scale national Automatic Tool Changer (ATC) with a chain-type tool magazine, a chain-type tool magazine reliability test bench is designed with a new fault detection system, where a new failure data collecting method is applied for taking failure data statistics and reliability analysis. This set of fault detecting and reliability analyzing system not only provides a way for ATC to predict system faults, but also creates good conditions for further ATC reliability research.
APA, Harvard, Vancouver, ISO, and other styles
24

Avci, Selcuk, and M. Selim Akturk. "Tool magazine arrangement and operations sequencing on CNC machines." Computers & Operations Research 23, no. 11 (November 1996): 1069–81. http://dx.doi.org/10.1016/0305-0548(96)00014-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Tian, Hailong, Zhaojun Yang, Guofa Li, and Chuanhai Chen. "Study on failure warning of tool magazine and automatic tool changer based on tool-pulling force." Journal of Mechanical Science and Technology 33, no. 9 (September 2019): 4371–81. http://dx.doi.org/10.1007/s12206-019-0833-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Chakravarthy, S. "On Two Cyclic Exponential Machines Sharing a Common Tool Magazine." American Journal of Mathematical and Management Sciences 7, no. 3-4 (February 1987): 205–32. http://dx.doi.org/10.1080/01966324.1987.10737219.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Agnetis, Alessandro, Arianna Alfieri, Paolo Brandimarte, and Paolo Prinsecchi. "Joint job/tool scheduling in a flexible manufacturing cell with no on-board tool magazine." Computer Integrated Manufacturing Systems 10, no. 1 (February 1997): 61–68. http://dx.doi.org/10.1016/s0951-5240(96)00023-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Bian, Pei Ying. "Design of Tools Flow Based on Reusable Scheduling in FMS." Advanced Materials Research 744 (August 2013): 491–94. http://dx.doi.org/10.4028/www.scientific.net/amr.744.491.

Full text
Abstract:
According to importance of the tool in the modern production,on the basis of tool-flow analysis, this thesis establishes reusable scheduling strategy. In this scheduling, it established a tool information management system based on the central tools magazine. The system includes the main information of each of the tools such as: number, location, usage, current state etc, and for them makes on real-time monitoring and anomalies reporting. Besides a priority mechanism is formulated for multi-tool and multi-task in the scheduling. Finally, the reusable scheduling has been modeling and simulation. To run the emulation program proved that the real-time and effectiveness of the tool management system, and the result of running is analyzed under configurations include the number of different tool, which for the actual production scheduling of tool provides the algorithms and software platforms.
APA, Harvard, Vancouver, ISO, and other styles
29

Lu, Xiaohong, Song Wang, Yanfei Lu, Nan Li, and Chaokai Wen. "Research on TBF distribution model of circular tool magazine and ATC." International Journal of Industrial and Systems Engineering 32, no. 3 (2019): 382. http://dx.doi.org/10.1504/ijise.2019.10022651.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Lu, Xiaohong, Song Wang, Yanfei Lu, Nan Li, and Chaokai Wen. "Research on TBF distribution model of circular tool magazine and ATC." International Journal of Industrial and Systems Engineering 32, no. 3 (2019): 382. http://dx.doi.org/10.1504/ijise.2019.101120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
31

Kim, Jae-Hyun, and Choon-Man Lee. "Multi-stage optimum design of magazine type automatic tool changer arm." Journal of Central South University 19, no. 1 (January 2012): 174–78. http://dx.doi.org/10.1007/s11771-012-0988-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Chen, F. C., and H. S. Yan. "A Methodology for the Configuration Synthesis of Machining Centers with Automatic Tool Changer." Journal of Mechanical Design 121, no. 3 (September 1, 1999): 359–67. http://dx.doi.org/10.1115/1.2829468.

Full text
Abstract:
The purpose of this paper is to present a design methodology for the configuration synthesis of machining centers with automatic tool changer to meet the required topology and motion characteristics. According to the concept of coordinate system, graph theory, generalization, specialization, and motion synthesis, this design methodology is proposed and computerized, and the machining centers with automatic tool changer up to eight links are synthesized. As the result, for the machining centers with drum type tool magazine, the numbers of configurations of machining centers with 6, 7, and 8 links are 2, 13, and 20, respectively. Similarly, for the machining centers with linear type tool magazine, the numbers of configurations of machining centers with 5, 6, 7, and 8 links are 1, 5, 20, and 60, respectively. Furthermore, this work provides a systematic approach for synthesizing spatial open-type mechanisms with topology and motion requirements.
APA, Harvard, Vancouver, ISO, and other styles
33

Lukic, Ljubomir, Mirko Djapic, Cristiano Fragassa, and Ana Pavlovic. "Optimization Model for Machining Processes Design in Flexible Manufacturing Systems." Journal of Advanced Manufacturing Systems 17, no. 02 (May 11, 2018): 137–53. http://dx.doi.org/10.1142/s0219686718500099.

Full text
Abstract:
Engineering machining processes realized in flexible machining systems is a highly complex task, especially since it encompasses complex optimization procedures apart from engineering. For a broad array of different workpieces produced in different series it is very difficult to engineer a manufacturing process for attaining maximum processing productivity with minimal production costs. This paper presents a developed postprocessor model enabling automatic generating of the numerical control code for all programs executed simultaneously in the production process on a greater number of machining centers. The model engrosses the different variants of tools in a machining center magazine, a different combination of elements of the machining mode, possibility of the most favorable layout of workpieces on pallets, compliance with the technological requirements in terms of simultaneous tool changes in machining center magazines, the required total processing time and minimal production costs. To that aim has been developed the postprocessor generator, as a program and software system, enabling all programs to be automatically updated based on the set up optimization strategy from tool changes, changes in cutting mode elements and technological operations. Such updated programs contain optimal technological parameters and provide minimal costs of production while at the same time the maximum utilization of tools during manufacture at an exactly specified time.
APA, Harvard, Vancouver, ISO, and other styles
34

Kankam-Kwarteng, Collins, and Frank Amoateng. "Servicescape And Customers’ Willingness-To-Pay For Vehicle Repairs And Maintenance Services." European Scientific Journal, ESJ 12, no. 10 (April 29, 2016): 289. http://dx.doi.org/10.19044/esj.2016.v12n10p289.

Full text
Abstract:
This research work investigates into the servicescape and customers’ willingness to pay for mechanical services at the Suame Magazine in the Kumasi Metropolis. The study adopted descriptive survey method and the target population was the mechanics and customers of mechanical services in the Suame Magazine in the Kumasi Metropolis. The study conveniently sampled 150 customers who patronize the services of the small scale auto mechanics who repair and maintain vehicles. Questionnaire was used to collect data from the customers. It was realized that signs, symbols and artifacts were not important to customers who go to the Suame Magazine for mechanical services but customers’ perceived ambient conditions and spatial layout as important to them. Customers disagree that Suame Magazine smell badly but they attested that the Suame Magazine is noisy. Suame Magazine has good layout but customers attested that the industrial enclave is always congested. Majority of customers’ relatively perceived charges or price of mechanical services to be relatively as expected and majority (58.0%) of the customers were willing to pay for mechanical services at the Suame Magazine. The customers’ willingness to pay for mechanical services depends on the servicesscape in the Suame Magazine. Mechanical garages with good ambient and spatial layout would have high patronage. The study recommends that mechanics in the Suame Magazine should strategically use servicescape as marketing tool for effective pricing which can influence customer willingness to pay for their services. The mechanical garages should have servicescape policy with specific emphasis on spatial layout and ambient conditions.
APA, Harvard, Vancouver, ISO, and other styles
35

Obreja, Claudiu, Gheorghe Stan, Lucian Adrian Mihaila, and Marius Pascu. "Application of Tree Graph Method for Reducing the Total Time of Tool Changing in Milling and Boring Machine Tools." Applied Mechanics and Materials 371 (August 2013): 431–35. http://dx.doi.org/10.4028/www.scientific.net/amm.371.431.

Full text
Abstract:
With a view of increasing the productivity on CNC machine tools one of the main solution is to reduce, as much as possible, the auxiliary time consumed with the set-up and replacement of the tools and work pieces engaged in the machining process. Reducing the total time of the tool changing process by the automatic tool changer system can be also achieved through minimizing the number of movements needed for the actual exchange of the tool, from the tool magazine to the machine spindle (the optimization of the tool changing sequences). This paper presents a new design method based on the tree-graph theory. We consider an existing automatic tool changing system, mounted on the milling and boring machining centre, and by applying the new method we obtain all the possible configurations to minimize the tool changing sequence of the automatic tool changer system. By making use of the method proposed we obtain the tool changing sequences with minimum necessary movements needed to exchange the tool. Reconfiguring an existing machine tool provided with an automatic tool changer system by making use of the proposed method leads to obtaining the smallest changing time and thus high productivity.
APA, Harvard, Vancouver, ISO, and other styles
36

Mutalieva, Ardak, Irina Savchuk, Laura Orazgaliyeva, Gulnar Jumazhanova, Akmaral Zhumykbayeva, and Eugenia Sheveleva. "Evaluation of psychological and pedagogical strategies for creating gender motivation in modern glossy magazines as an “Overton Window” in an electronic and digital society." SHS Web of Conferences 88 (2020): 01027. http://dx.doi.org/10.1051/shsconf/20208801027.

Full text
Abstract:
The authors consider modern glossy magazines as a tool for constructing and transforming gender attitudes in the context of psychological and pedagogical strategies for constructing gender in the conditions of an electronic-digital society and the specifics of communication in a pandemic situation of self-isolation, when information from the Internet has a dominant influence on modern people. A special aspect belongs to the analysis of the “Overton window” mechanism in preserving and / or transforming established gender roles in the modern electronic information society. Magazine discourse at the beginning of the 21st century acts as a powerful tool for influencing the recipient in a situation where digital communication and electronic advertising discourse prevail. The authors analyze the phenomenon of creating motivation for predictable gender behaviour, which is influenced by electronic glossy magazine discourse, considered from the perspective of psycholinguistics. The authors define this type of discourse as a special type of discursive process that acts as an explicit tool of globalization. The authors use the author’s synergetic approach based on the methods of linguistics, pedagogy, psychology and economic management as a methodology. The authors emphasize the novelty of this discourse in the context of its influence on the formation and transformation of the modern language personality in the context of gender stereotypes. The relevance of the research is emphasized by the fact that glossy mass-media discourse is the latest in terms of the chronology of the historical process. It actualizes the poly-ethno-socio-cultural and educational space of the beginning of the XXI century, demonstrates the processes of transformation of gender attitudes in the context of unification and globalization in the value orientations of the “philosophy of glamour”.
APA, Harvard, Vancouver, ISO, and other styles
37

Rau, K. Raghava, and O. V. Krishnaiah Chetty. "Production planning of FMS under tool magazine constraints: A dynamic programming approach." International Journal of Advanced Manufacturing Technology 11, no. 5 (September 1996): 366–71. http://dx.doi.org/10.1007/bf01845695.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Luan, Yihan, Steven Y. Liang, Xiaohong Lu, Pengzhuo Han, and Z. O. U. Yun. "Comprehensive Testing and Performance Evaluation of Chain-type Tool Magazine and ATC." International Journal of Manufacturing Research 16, no. 4 (2021): 1. http://dx.doi.org/10.1504/ijmr.2021.10039080.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Coleman, P., M. Ozbayrak, and R. Bell. "Tool Management and Job Allocation in Flexible Machining Cells Part 2: Tool-Oriented Strategies." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 210, no. 5 (October 1996): 417–27. http://dx.doi.org/10.1243/pime_proc_1996_210_139_02.

Full text
Abstract:
This paper illustrates the potential for the improved economic provision of tooling in flexible machining cells, through the use of a multi-stage algorithm for the allocation of jobs to machines and the efficient exchange of the associated tool kits. The tool-oriented manufacturing algorithm uses a combination of clustering techniques to identify groups of jobs which have some similarity of operational and hence tooling requirements. These clustered groups are allocated to a particular machining cell configuration with respect to the additional constraints of balancing the overall work load per machine and managing tool kit exchange under limited tool magazine capacity. The performance of tool-oriented strategies has been investigated using a computational study and indicates a consistent advantage compared to alternative work-oriented strategies. This is measured in terms of the quantity and frequency of tool exchange activities required over a given manufacturing period and the degree of necessary disturbance to the sequence of job throughput.
APA, Harvard, Vancouver, ISO, and other styles
40

Mitsikopoulou, Bessie, and Christina Lykou. "The discursive construction of the recent European economic crisis in two political magazines." On the Horizon 23, no. 3 (September 7, 2015): 190–201. http://dx.doi.org/10.1108/oth-05-2015-0022.

Full text
Abstract:
Purpose – Acknowledging the important role of the media in shaping a European public sphere, the purpose of this paper is to explore how the recent economic crisis is discursively construed in the context of the British media discourse. It investigates discursive constructions of the economic crisis in two political magazines of different ideological positioning by placing emphasis on the economic crisis in Greece, the “weak link” of the Eurozone. Design/methodology/approach – The study draws on systemic functional linguistics which views language as social semiotic and conducts a transitivity analysis of a corpus consisting of 59 articles (a total of 61,820 words) from two weekly British political magazines, one of conservative and one of centre-left political position. The analysis is assisted by Wordsmith 6.0 concordance corpus tool. Findings – It is argued that the articles of the conservative magazine construe the crisis as primarily local and financial, discussing its effects on the British economy. On the other hand, the articles of the centre-left magazine view the crisis as a systemic one derived from and, at the same time, affecting European Union policies and stress its political and economic implications in all of Eurozone. Originality/value – The findings of the study contribute to the body of studies which investigate the role of language in the construction of the economic crisis and also adds to the on-going discussion regarding the development of a European public sphere as part of the wider European Project and the process of European integration.
APA, Harvard, Vancouver, ISO, and other styles
41

Dickenson, Jackie. "The Woman’s Budget Bureau: friendship and consumption in Australia." Journal of Historical Research in Marketing 8, no. 3 (August 15, 2016): 434–51. http://dx.doi.org/10.1108/jhrm-08-2014-0024.

Full text
Abstract:
Purpose This paper aims to reveal the marshalling of an emotion – loneliness – over time for the construction of relationships between advertisers and consumers between 1909 and 1934, paying attention to the shifting contexts in which these relationships were built, maintained and extended. It also draws attention to the ways in which advertising and marketing work in society, and advances the understanding of the development of consumer culture in Australia. Design/methodology/approach The paper uses textual analysis of letters from readers and editorial content published in the magazine over a 25-year period, supplemented by material from newspapers and memoirs. Findings The paper reveals how a women’s magazine marshalled the loneliness of Australian women, especially rural Australian women, to attach them to the magazine and its advertisers. Over 25 years, the magazine editors built a reservoir of trust between readers and the magazine. When the economy turned, this reservoir could be drawn upon to maintain reader attachment and maximise sales. Research limitations/implications This paper examines the use of emotion in just one magazine. A comparative study would be beneficial to see whether this exploitation of emotion was widespread. Practical implications The paper suggests the importance of emotion as a tool for attaching consumers to brands and for maintaining that attachment through financial difficulties. Originality/value This paper supports the turn to the study of emotion in history and, specifically, in the development of consumer culture.
APA, Harvard, Vancouver, ISO, and other styles
42

Steinberg, Alissa, Judy Paisley, and Kristofer Bandayrel. "Antioxidant Health Messages: In Canadian Women's Magazines." Canadian Journal of Dietetic Practice and Research 72, no. 4 (December 2011): e197-e204. http://dx.doi.org/10.3148/72.4.2011.e197.

Full text
Abstract:
Purpose: Recently, antioxidants have taken centre stage in media and advertising messages. While 80% of Canadians think they are well-informed about nutrition, many are confused about the health effects of specific nutrients. Forty-six percent of Canadians seek information from newspapers and books, and 67% of women rely on magazines. We examined the content and accuracy of antioxidant health messages in Canadian women's magazines. Methods: The top three Canadian magazines targeted at women readers were selected. A screening tool was developed, pilot tested, and used to identify eligible articles. A coding scheme was created to define variables, which were coded and analyzed. Results: Seventy-seven percent of 36 magazine issues contained articles that mentioned antioxidants (n=56). Seventyone percent (n=40) of articles reported positive health effects related to antioxidant consumption, and 36% and 40% of those articles framed those effects as definite and potential, respectively (p<0.01). Conclusions: The articles sampled conveyed messages about positive antioxidant health effects that are not supported by current evidence. Improved standards of health reporting are needed. Nutrition professionals may need to address this inaccuracy when they develop communications on antioxidants and health risk.
APA, Harvard, Vancouver, ISO, and other styles
43

Barness, Jessica. "Designing the Emigre Magazine Index: Theory and Practice in an Alternative Research Tool." Design and Culture 8, no. 2 (May 3, 2016): 181–97. http://dx.doi.org/10.1080/17547075.2016.1187913.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Lu, Xiaohong, Zhenyuan Jia, Shengnan Gao, and Pengzhuo Han. "Failure Mode Effects and Criticality Analysis (FMECA) of Circular Tool Magazine and ATC." Journal of Failure Analysis and Prevention 13, no. 2 (January 31, 2013): 207–16. http://dx.doi.org/10.1007/s11668-013-9654-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Chakravarthy, S. "A stochastic model for two servers sharing a tool magazine and its analysis." Mathematical Modelling 6, no. 4 (1985): 307–32. http://dx.doi.org/10.1016/0270-0255(85)90032-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Olgun, Kenan. "Local cultural contribution from Adapazarı People’s House: Sakarya Magazine and its contentAdapazarı Halkevi’nden yöresel kültüre bir katkı: Sakarya Dergisi ve içeriği." Journal of Human Sciences 14, no. 4 (November 14, 2017): 3535. http://dx.doi.org/10.14687/jhs.v14i4.4950.

Full text
Abstract:
Started on February 19, 1932, People’s Houses have an important place in the cultural leap, secularisation and modernization policies of the early Turkish Republic. Grounded on the reasons for being a tool for propaganda of the Republican People's Party (CHP) People Houses were abolished by the Democrat Party in 1951. One of these cultural institutions whose number were reached to 478 until the year 1951 in which they had closed, is Adapazarı People’s House which is opened in February 23, 1934.The Sakarya magazine is the Adapazarı People’s House magazine. Between March 1, 1943 and August 1943, 6 issues were published. The publications of the magazines are published in the regulations of the people's houses. Despite this, Adapazarı, the district, published Sakarya Magazine. The publication policy of Sakarya Magazine is to spread the principles of the CHP. Adapazari has named Sakarya as the magazine which also wants to be a province.The People’s Houses, which are came to be known as the institutions of culture and which is also a means of giving people the idea of being a nation and a citizen, began to publish journals in order to reveal their politics to the public. During the period of Atatürk , the journal of People’s House of Adapazarı which is called Sakarya, has been going on to be an important source for the history of Adapazarı. So, in the study, the first publishing of Sakarya, some problems during the publishing period, the subjects in the journal and closing of the journal have studied.Extended English abstract is in the end of PDF (TURKISH) file.ÖzetMüze ve Sergi şubesi hariç olmak üzere 23 Şubat 1934 tarihinde diğer şubeleri ile birlikte açılan Adapazarı Halkevi, Halkevlerinin kapatıldığı 1951 yılına kadar çok çeşitli alanlarda faaliyetlerde bulunmuştur. Bunlardan biri de dergi çıkarma görevi de olan Dil ve Edebiyat Şubesidir. Her ne kadar 1940 yönetmeliğinde dergi çıkartma görevi il merkezlerindeki halkevlerine verilmiş olsa da döneminde Kocaeli’ne bağlı bir ilçe olan Adapazarı da dergi çıkartma işinden geri kalmamıştır. Yöreden geçen nehirden adını alan Sakarya Dergisi, yayın hayatına 1 Mart 1943 tarihinde başlamıştır. Sakarya Dergisi, ancak 6 sayı yayınlanabilmiş, 1 Ağustos 1943 tarihli sayısıyla da yayın hayatı sona ermiştir.Adapazarı Halkevi dergisi Sakarya, Adapazarı’nın yerel tarihinde önemli bir kaynak olma özelliğini hâlâ korumaktadır. Bu çalışmada Sakarya dergisi ve içeriği elde mevcut olan 6 sayı üzerinden incelenecektir. Çalışmada Sakarya Dergisi’nin ortaya çıkışı, dergi çıkartma süreci ve sonrasında yaşanan sıkıntılar, dergide ele alınan konular ve derginin kapatılması ele alınmıştır.
APA, Harvard, Vancouver, ISO, and other styles
47

Freeman, Jeanne, and Ying Li. "Assessment of Leading Health Educators in Select General Readership Magazines, 2005-2008." Californian Journal of Health Promotion 9, no. 2 (December 1, 2011): 85–94. http://dx.doi.org/10.32398/cjhp.v9i2.1439.

Full text
Abstract:
Mass media can play an important role in setting public agenda and stimulating public attention to issues. Purpose: To assess health-related articles in select mass-circulating general readership magazines, and identify which of the Leading Health Indicators (LHI) each of them addresses. Methods: Four of the top 35 general readership magazines listed in the 2007 Magazine Publishers of America were considered, and included Reader’s Digest, Time, Newsweek, and U.S. News and World Report. ProQuest was searched to obtain all health-related articles (n=55) available in these magazines between July 2005 and August 2008. Articles were assessed in regards to LHIs, sources of information, presentation of statistics and risk factors, and citation of prevention measures. Results: The most frequent LHIs addressed were overweight and obesity (21.4%) and mental health (19%). The most frequent source of information was experts such as MDs and PhDs (92.9%). Incidence and prevalence of LHIs were frequently presented, while risk factors were presented in less than 25% of the articles. Conclusion: Mass media can be a valuable tool for dissemination and stimulation of public attention to high priority public health issues. Enhanced coordination is needed between health educators and members of the press to ensure accurate and universally relevant health information in general readership magazines.
APA, Harvard, Vancouver, ISO, and other styles
48

Pezzini, Barbara. "An open resource for scholars and a primary source for research: the Burlington Magazine online index." Art Libraries Journal 36, no. 3 (2011): 46–51. http://dx.doi.org/10.1017/s0307472200017065.

Full text
Abstract:
The Burlington Magazine, with its juxtaposition of art trade and academia, historicism and aestheticism, has occupied a unique role in the international art historical panorama since it was first published in 1903. From its very beginnings the magazine had produced a detailed printed index, which reflected the diversity of its contents. In 2005 the magazine received a grant from the Andrew W. Mellon foundation to produce a cumulative online index from 1903 to the present. The Burlington Index is now online, nearly complete and free for all to use. Why did the Burlington need an index when it was already included in JSTOR? How is the Burlington Index structured and what is it based on? What are its aims and limitations? The Burlington Index wants to be a vessel to navigate the ocean of free-text available on JSTOR; a tool for research to open up the contents of the Burlington to a new generation of readers and, ultimately, a magnifying glass to reveal the magazine as a primary source for research on the history of art history, the art market and the art press.
APA, Harvard, Vancouver, ISO, and other styles
49

Permatasari, Nur Endah, Ika Maiatun Khasanah, and Nur Alifiah Martia Putri. "Kesalahan Berbahasa dalam Majalah Pandawa IAIN Surakarta Edisi 2018 pada Tataran Ejaan dan Sintaksis." Diglosia: Jurnal Kajian Bahasa, Sastra, dan Pengajarannya 2, no. 2 (August 30, 2019): 103–14. http://dx.doi.org/10.30872/diglosia.v2i2.22.

Full text
Abstract:
Language is a tool to express an opinion or statement that will be conveyed to others. There are two types in language media, namely oral language and written language. One work that uses written language as a communication medium is a magazine. To write a magazine, you must use a language structure that is good and right or in accordance with the rules of language. But often times in a magazine there are still many mistakes, for example, in the 2018 edition of Pandawa magazine, there are errors in language spelling and at the syntactic level. Types of language errors at the spelling level include errors in letter usage, word writing, use of punctuation, and combination spelling. Types of language errors at the syntactic level include, discourse, sentences, clauses, and phrases. This study aims to describe language errors, especially at the spelling level and at the syntactic level. The method used in this study is descriptive qualitative research, which describes the object of language errors in the 2018 edition of the Pandawa IAIN magazine. The techniques of data collection and data analysis are (1) collecting language errors, (2) identifying errors based on linguistic level (syntax, phonology, morphology, and spelling), (3) ranking errors, i.e. sorting errors based on the number of errors, (4) explaining conditions, explaining what is wrong, the cause of errors, and how to correct errors, (5) predicting linguistic level that is prone to errors, (6) correcting errors, namely correcting errors, finding the right way to reduce or eliminate these errors. The results of this study, namely errors in the spelling level in the Pandawa IAIN Surakarta magazine, there are capital letters writing errors, italics, punctuation marks, and hyphens; errors at the syntactic level in the Pandawa IAIN Surakarta magazine, there are mistakes in phrases, and sentences.
APA, Harvard, Vancouver, ISO, and other styles
50

Vorozhbitova, Aleksandra A., Zulima Z. Bzegezheva, Anastasia A. Buryanova, and Lyudmila V. Prus. "Gloss discourse as a gender tool of consumer motivation in the era of digital communications." Eduweb 15, no. 2 (July 30, 2021): 245–60. http://dx.doi.org/10.46502/issn.1856-7576/2021.15.02.19.

Full text
Abstract:
The purpose of the article is to characterize the glossy magazine discourse (GMD) of the early 21st century as a powerful tool for influencing the recipient in a situation with prevailing digital communication and electronic advertising, as a special discursive process that acts as an explicit tool of globalization. The phenomenon of creating consumer motivation for predictable purchasing behavior, which is influenced by print and electronic glossy magazine discourse, is analyzed from the standpoint of the Linguistic and Rhetorical (L&R) Paradigm of the Sochi scientific school. The authors suggest an original synergetic methodology combining the methods of linguistics, new rhetoric, pedagogy, psychology and economic management emphasizing the novelty of this discourse in the context of its influence on the formation and transformation of the modern linguistic personality. It is concluded that this type of discourse, the latest in terms of chronology of the historical process, actualizes the polyethnic sociocultural & educational space of the early 21st century at a new level (on the example of Russia). It is proved that GMD stimulates transformations in line with the leading trend of the formation of a "planetary linguistic personality" with the value orientations of the "philosophy of glamour".
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the bibliographies on the topic 'Tool magazine' for other source types:
Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography