Academic literature on the topic 'Tooth Remineralization Acid Etching'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Tooth Remineralization Acid Etching.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Journal articles on the topic "Tooth Remineralization Acid Etching"
1
Chaudhary Tayal, Suruchi, Jaidev Dhillon, and Abhishek Tayal. "Effect of Prior etching on Bond Strength of Self-Etch adhesive in case of Sensitive Teeth treated with CPP-ACP." Dental Journal of Advance Studies 01, no. 01 (April 2013): 009–14. http://dx.doi.org/10.1055/s-0038-1670585.
Full textAbstract:
Abstract Introduction: The management of dentinal hypersensitivity involves remineralization by various means, one of which being CPP-ACP paste, followed by restoration. It was speculated that the bond strength of self-etching adhesive was affected following the application of CPP-ACP paste and prior etching with phosphoric acid. Aims and objectives: To evaluate the tensile bond strength (TBS) of G-Bond (GB, self-etching adhesive) to dentin following the application of CPP-ACP (Tooth Mousse/TM), with and without prior etching. Materials and method: Freshly extracted forty five permanent molars were collected for the study. All the teeth were ground and polished to expose the flat dentinal surface. The teeth were embedded in the resin in separate molds and were divided into three equal groups of fifteen samples each Group 1: Samples treated with Tooth Mousse for 60 min daily for 7 days and then restored with GB and composite (Filtek Z350, 3M ESPE). Group 2: Samples treated with Tooth Mousse and etched with phosphoric acid prior to restoration with GB and composite. Group3: Samples restored with GB and composite. A split brass mold was placed over the predesigned location and with help of the plasma coated instrument, composite resin was placed. Tensile loading was done using Universal Testing Machine. Conclusion: TBS of GB was not significantly reduced after CPP-ACP application, but after prior etching the CPP-ACP specimens, the bond strength of GB was significantly reduced.
2
Cao, Li, Junling Wu, Qiang Zhang, Bashayer Baras, Ghalia Bhadila, Yuncong Li, Mary Anne S. Melo, et al. "Novel Protein-Repellent and Antibacterial Resins and Cements to Inhibit Lesions and Protect Teeth." International Journal of Polymer Science 2019 (July 2, 2019): 1–11. http://dx.doi.org/10.1155/2019/5602904.
Full textAbstract:
Orthodontic treatment is increasingly popular as people worldwide seek esthetics and better quality of life. In orthodontic treatment, complex appliances and retainers are placed in the patients’ mouths for at least one year, which often lead to biofilm plaque accumulation. This in turn increases the caries-inducing bacteria, decreases the pH of the retained plaque on an enamel surface, and causes white spot lesions (WSLs) in enamel. This article reviews the cutting-edge research on a new class of bioactive and therapeutic dental resins, cements, and adhesives that can inhibit biofilms and protect tooth structures. The novel approaches include the use of protein-repellent and anticaries polymeric dental cements containing 2-methacryloyloxyethyl phosphorylcholine (MPC) and dimethylaminododecyl methacrylate (DMAHDM); multifunctional resins that can inhibit enamel demineralization; protein-repellent and self-etching adhesives to greatly reduce oral biofilm growth; and novel polymethyl methacrylate resins to suppress oral biofilms and acid production. These new materials could reduce biofilm attachment, raise local biofilm pH, and facilitate the remineralization to protect the teeth. This novel class of dental resin with dual benefits of antibacterial and protein-repellent capabilities has the potential for a wide range of dental and biomedical applications to inhibit bacterial infection and protect the tissues.
3
Damasceno, Janaina Emanuela, Felipe Vilasboas Rodrigues, Luana Mendonça Dias, Patricia Akemi Nishitani Shibasaki, Max José Pimenta Lima, Roberto Paulo Corrreia De Araújo, Richard Mark Foxton, and Andrea Nóbrega Cavalcanti. "Effect of Dental Erosion and Methods for its Control on the Marginal and Internal Adaptation of Restorations with Different Adhesive Systems." Journal of Health Sciences 21, no. 5 (December 20, 2019): 437–44. http://dx.doi.org/10.17921/2447-8938.2019v21n5p437-444.
Full textAbstract:
AbstractThe dentin exposed to erosive challenges is often superficially protected to prevent progression of the lesion. This study investigated the marginal and internal adaptation of composite resin restorations made on surfaces that had first been treated with different methods for controlling erosion. Cavities with margins in dentin were prepared in bovine incisors (n=360) and were divided into three groups according to the method for controlling the erosive challenge: negative control, topical application of fluoride and resin-modified glass ionomer varnish. The specimens were then randomly divided into three sub-groups according to the exposure to simulated gastric acid solution (DES) (5% HCl, pH=2.2) and subsequent remineralization (RE): negative control, 9 and 18 cycles of DES-RE. Finally, teeth were divided into four groups, depending on the bonding agent used for composite resin restoration (n=10): conventional etch-and-rinse adhesive system (2 and 3 steps) and self-etching (1 and 2 steps). Front and internal images of the interface tooth/restoration were recorded in stereoscopic microscope (15x) to quantify the percentage of adhesive failures. Despite the promising results of the resin-modified glass ionomer varnish after 9 cycles; no protective material prevented increased internal defects after 18 erosive cycles. More continuous internal margins were noted with etch-and-rinse acid systems after more intense erosion. The maintenance of internal margins in eroded substrates was positively influenced by the resin-modified glass ionomer varnish and, under the most aggressive challenge, by the use of etch-and-rinse adhesives systems. Keywords: Tooth Erosion. Dentin. Acid Gastric. ResumoA dentina exposta a desafios erosivos é muitas vezes superficialmente protegida para prevenir a progressão da lesão. Este estudo investigou a adaptação marginal e interna de restaurações de resina composta realizadas em superfícies que foram previamente tratadas com diferentes métodos para controlar a erosão. Cavidades com margens em dentina foram preparadas em dentes incisivos bovinos (n=360) e divididas em três grupos de acordo com o método de controle do desafio erosivo: controle negativo, aplicação tópica de flúor e verniz de ionômero de vidro modificado por resina. Os espécimes foram então divididos aleatoriamente em três subgrupos de acordo com a exposição à solução de ácido gástrico simulada (DES) (HCl a 5%, pH = 2,2) e posterior remineralização (RE): controle negativo, 9 e 18 ciclos de DES-RE. Por fim, os dentes foram divididos em quatro grupos, de acordo com o agente de união utilizado para a restauração da resina composta (n=10): sistema adesivo convencional (2 e 3 passos) e autocondicionante (1 e 2 passos). Imagens frontais e internas da interface dente/restauração foram registradas em microscópio estereoscópico (15x) para quantificar a porcentagem de falhas adesivas. Apesar dos resultados promissores do verniz de ionômero de vidro modificado por resina após 9 ciclos; nenhum material de proteção impediu o aumento de defeitos internos após 18 ciclos erosivos. Margens internas mais contínuas foram observadas com sistemas adesivos convencionais após erosão mais intensa. A manutenção das margens internas em substratos erodidos foi influenciada positivamente pelo verniz de ionômero de vidro modificado por resina e, sob o desafio mais agressivo, pelo uso de sistemas de adesivos convencionais. Palavras-chave: Erosão Dentária. Dentina. Ácido Gástrico.
4
Al-Khateeb, Susan, Rob Exterkate, Birgit Angmar-Månsson, and Bob ten Cate. "Effect of acid-etching on remineralization of enamel white spot lesions." Acta Odontologica Scandinavica 58, no. 1 (January 2000): 31–36. http://dx.doi.org/10.1080/000163500429406.
Full text
5
Shimazu, K., K. Ogata, and H. Karibe. "Caries-Preventive Effect of Fissure Sealant Containing Surface Reaction-Type Pre-reacted Glass Ionomer Filler and Bonded by Self-etching Primer." Journal of Clinical Pediatric Dentistry 36, no. 4 (July 1, 2012): 343–47. http://dx.doi.org/10.17796/jcpd.36.4.n444r730r773un53.
Full textAbstract:
Objective: We aimed to evaluate the caries-preventive effect of a fissure sealant containing surface reactiontype pre-reacted glass ionomer (S-PRG) filler and bonded by self-etching primer versus those of 2 conventional resin-based sealants bonded by acid etching in terms of its impact on enamel demineralization and remineralization, enamel bond strength, and integrity of debonded enamel surfaces. Materials and method: Demineralization, remineralization, and bond strength on untreated enamel and enamel subsurface lesions of bovine incisors were assessed among the sealants by polarizing microscopy and microradiography; debonded enamel surfaces were examined by scanning electron microscopy. Results: The conventional resin-based sealants bonded by acid etching caused surface defects on the enamel subsurface lesions and significantly increased the lesion depth (p = 0.014), indicative of enamel demineralization. However, the SPRG filler-containing sealant bonded by self-etching primer maintained the enamel surface integrity and inhibited enamel demineralization. No difference in bond strength on both untreated enamel and enamel subsurface lesions was noted among the sealants. Conclusions: An S-PRG filler-containing fissure sealant bonded by self-etching primer can prevent enamel demineralization, microleakage, and gaps without the tags created by acid etching regardless of the enamel condition. Such sealants are suitable for protecting the pits and fissures of immature permanent teeth.
6
Metly, Annesha, Dedi Sumantri, and Fadil Oenzil. "The effect of pasteurized milk and pure soy milk on enamel remineralization." Padjadjaran Journal of Dentistry 31, no. 3 (November 30, 2019): 202. http://dx.doi.org/10.24198/pjd.vol31no3.22833.
Full textAbstract:
Introduction: Tooth remineralization agent can be found in pasteurized milk and soy milk. Ca2+ and PO43- ions concentration in both products inhibited hydroxyapatite dissolution and enhanced remineralization. This study was aimed to investigate the effect of pasteurized milk and pure soy milk on tooth enamel remineralization. Methods: This study was an experimental laboratory with pre-test post-test control group design. Twenty-seven maxillary premolars were divided into 3 groups; 37% phosphoric acid used to demineralized the samples followed by initial enamel hardness measurement. All samples were immersed in aquadest, pasteurized milk, and pure soy milk for 14 days, 102 minutes per day. Final enamel hardness was measured with the Vickers hardness test. Results: Increasing enamel hardness was found in all groups. Two-way ANOVA test was used to compare the increase of enamel hardness in all group, which showed the p-value = 0.002. Post-hoc LSD test was then used to compare the increase of the enamel hardness in pasteurized milk and pure soy milk groups, which resulted in the p-value = 0.147. Conclusion: There was an effect of pasteurized milk and pure soy milk group on enamel remineralization. However, there was no difference in the increase of enamel hardness value between pasteurized milk and pure soy milk groups.Keywords: Pasteurized milk, pure soy milk, tooth enamel, remineralization.
7
Zaharia, Agripina, Viorica Ghisman Plescan, Irina Atkinson, Oana Catalina Mocioiu, Alina Cantaragiu, and Viorica Musat. "Remineralization of Natural Tooth Enamel in Artificial Saliva Environment." Revista de Chimie 68, no. 3 (April 15, 2017): 510–14. http://dx.doi.org/10.37358/rc.17.3.5490.
Full textAbstract:
This paper investigates in situ remineralization of the acid-etched natural enamel surface, by incubation in a phosphate solution with neutral pH, at 37 �C for 4-10 days, without using any enamel matrix derivative (EMD). We investigated the morphology, crystallinity, chemical composition and structure of the newly grown layer onto the natural enamel surface stored in contact with artificial saliva (AS) having a composition similar to natural oral environment. The crystalline phases, crystallite size and orientation, as well as the chemical and phase composition of the remineralized dental enamel samples were studied by scanning electron microscopy coupled with energy dispersive X-ray spectrometry, Fourier transform infrared spectroscopy and X-ray diffraction. The experimental results showed that the enamel crystals grown on the demineralized enamel surface are mainly Ca-deficient apatite hexagonal structure. Fluoridated hydroxyapatite and sylvite-type KCl crystallites, which amount considerable increased in the case of sample stored in AS for 10 days, were also identified.
8
Yuanita, Tamara, Nanik Zubaidah, and Mifta Izha A R. "Enamel Hardness Differences After Topical Application Of Theobromine Gel And Casein Phosphopeptide-Amorphous Calcium Phosphate." Conservative Dentistry Journal 10, no. 1 (June 25, 2020): 5. http://dx.doi.org/10.20473/cdj.v10i1.2020.5-8.
Full textAbstract:
Background: Most soft drinks contain citric acid / phosphoric acid with pH <3.5. Strong acids in the oral cavity cause tooth erosion. Tooth erosion leads to demineralization enamel. Remineralization can prevent demineralization process. One of the commercial remineralization agents is Casein Phosphopeptide-amorphous Calcium Phosphate(CPP-ACP) but it has low solubility and less affordable price. Therefore, a natural ingredients such as theobromine from cocoa extract need to be developed as remineralization agent. Objective: To determine enamel hardness differences due to topical application of theobromine gel and CPP-ACP. Method: incisive crowns were cut off (1x1) cm then planted in cylindrical acrylic resin. All samples were immersed with citric acid for 90 minutes then divided into 3 groups. Group I (control) was immersed with aquades (96 min), group II was applied with theobromin gel 200 mg/l (96 min), group III was applied with CPP-ACP (96 min). By using vickers hardness tester, enamel hardness be measured (15 sec) at 3 points. Results: There were significant differences between the control group, CPP-ACP group, and theobromine gel group. Conclusion: Enamel hardnesse with theobromine gel application is higher than CPP-ACP application..
9
Toledano, Manuel, Inmaculada Cabello, Fátima S. Aguilera, Estrella Osorio, Manuel Toledano-Osorio, and Raquel Osorio. "Improved Sealing and Remineralization at the Resin-Dentin Interface After Phosphoric Acid Etching and Load Cycling." Microscopy and Microanalysis 21, no. 6 (October 16, 2015): 1530–48. http://dx.doi.org/10.1017/s1431927615015317.
Full textAbstract:
AbstractThe purpose of this study was to investigate micro-morphology of the resin-dentin inter-diffusion zone using two different single-bottle self-etching dentin adhesives with and without previous acid-etching, after in vitro mechanical loading stimuli. Extracted human third molars were sectioned to obtain dentin surfaces. Two different single-bottle self-etching dentin adhesives, Futurabond U and Experimental both from VOCO, were applied following the manufacturer’s instructions or after 37% phosphoric acid application. Resin-dentin interfaces were analyzed with dye assisted confocal microscopy evaluation (CLSM), including the calcium-chelation technique, xylenol orange (CLSM-XO). CLSM revealed that resin-dentin interfaces of unloaded specimens were deficiently resin-hybridized, in general. These samples showed a Rhodamine B-labeled hybrid complex and adhesive layer completely affected by fluorescein penetration (nanoleakage) through the porous resin-dentin interface, but thicker after PA-etching. Load cycling promoted an improved sealing of the resin-dentin interface at dentin, a decrease of the hybrid complex porosity, and an increment of dentin mineralization. Load cycled specimens treated with the XO technique produced a clearly outlined fluorescence due to consistent Ca-mineral deposits within the bonding interface and inside the dentinal tubules, especially when the experimental adhesive was applied.
10
Onwubu, Stanley Chibuzor, Phumlane Selby Mdluli, Shenuka Singh, and Vishal Bharuth. "Remineralization Potential of a Modified Eggshell–Titanium Composite-Scanning Electron Microscope Study." European Journal of Dentistry 13, no. 02 (May 2019): 187–92. http://dx.doi.org/10.1055/s-0039-1695662.
Full textAbstract:
Abstract Objectives This article reports the remineralization potential of a modified eggshell–titanium dioxide (EB-TiO2) composite in the management of DH. Materials and Methods The prepared composite was further characterized using different techniques such as Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM), and field scanning electron microscopy (FSEM) to establish the modification. Forty freshly extracted bovine anterior teeth were used to evaluate the dentin tubule remineralization potential of EB-TiO2. Each tooth was sectioned mesiodistally to obtain dentin blocks. The dentin blocks were subsequently agitated in 4% wt. citric acid for 2 minutes to simulate sensitive tooth. Each dentin block was randomly assigned to five groups, namely Group 1: untreated, Group 2: EB alone, Group 3: EB-TiO2 treated, and Group 4: Colgate Sensitive, and Group 5: Sensodyne treated (n = 8) that were then subjected to remineralization protocol. Results Both the XRD and FTIR images confirm the surface medication of EB-TiO2. The TEM revealed a nonhomogeneous structure with an average particle size of 65 nm. FSEM further was used to observe the remineralization capabilities of the samples. The FSEM image of the dentin specimens treated with EB-TiO2 shows complete remineralization of the dentin tubules, which remain intact postacidic exposure. Conclusions This study confirmed that EB-TiO2 composite effectively remineralizes dentin tubules. More so, the composite could be a cheaper and more efficient therapy material in the management of DH.
Dissertations / Theses on the topic "Tooth Remineralization Acid Etching"
1
Yeslam, Hanin E. "The effect of acid etching on remineralization of incipient caries lesions : a micro-ct study /." Connect to resource online, 2009. http://hdl.handle.net/1805/2084.
Full textAbstract:
Thesis (M.S.D.)--Indiana University School of Dentistry, 2009.Title from PDF t. p. (viewed Feb. 10, 2010) Advisor(s): Masatoshi Ando, Chair of the Research Committee, Carlos Gonzalez-Cabezas, Melvin Lund, Tien-Min Gabriel Chu, Michael Cochran. Curriculum vitae. Includes abstract. Includes bibliographical references (leaves 64-70).
2
Soares, Ana Flávia. "Comprometimento do esmalte bovino após escovação em função do condicionamento ácido, clareamento ativado com luz híbrida, concentração e pH dos géis clareadores." Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/25/25148/tde-05042013-145654/.
Full textAbstract:
Este estudo in vitro avaliou a influência do clareamento ativado com luz híbrida, em função da variação do pH e concentração de géis clareadores, e do condicionamento ácido prévio do esmalte bovino na alteração da rugosidade e desgaste após escovação simulada. Fragmentos de esmalte (1,5cm x 0,5cm x 0,4cm) foram divididos em duas partes, ficando uma metade como controle e a outra como área teste. Esta última foi subdividida em duas metades, sendo que uma recebeu o condicionamento ácido somado ao gel clareador e a outra somente o gel clareador. Os espécimes foram divididos aleatoriamente em seis grupos (n=10): C = controle; TBO35LH = Total Blanc Office 35% 1 sessão (5x8) + ativação com luz híbrida LED/Laser; LPS35LH= Lase Peroxide Sense 35% - 1 sessão (5x8) + ativação com luz híbrida LED/Laser; LPS25LH = Lase Peroxide Sense 25% - 1 sessão (5x8) + ativação com luz híbrida LED/Laser; LPL15LH = Lase Peroxide Lite 15% - 1 sessão (5x8) + ativação com luz híbrida LED/Laser; LPL10LHV = Lase Peroxide Lite 10% - 1 sessão (5x8) + ativação com luz híbrida LED/Laser violeta. A rugosidade aritmética (Ra) inicial, após clareamento e após escovação, foi determinada pela média (μm) de três leituras (em cada área sem e com ácido totalizando seis leituras por espécimes) com o rugosímetro Hommel Tester T 1000. Os valores médios do pH foram determinados pelo peagômetro digital Sentron Model 1001 nos tempos inicial e final. Os espécimes foram armazenados em saliva artificial por sete dias, submetidos a 100.000 ciclos de escovação simulada. Após 24 horas o desgaste superficial foi determinado (μm) empregando o mesmo rugosímetro. Em relação ao desgaste e a alteração de rugosidade superficial, os resultados foram submetidos à Anova a dois critérios e a dois critérios de medidas repetidas e posteriormente ao teste de Tukey. Os dados obtidos das leituras de pH foram submetidos à ANOVA a um critério e a dois critérios de medidas repetidas e ao teste de Kruskal Wallis e Tukey para comparações individuais entre os grupos. Para todos os testes o nível de significância foi de 5%. A rugosidade e o desgaste apontaram diferenças estatísticas entre os grupos, principalmente quando comparado à área com e sem ácido. Os géis clareadores apresentaram tendência de diminuição dos valores de pH do tempo inicial para o tempo final, contudo, uma correlação com a rugosidade e com o desgaste não pôde ser estabelecida de forma clara.This in vitro study evaluated the influence of whitening activated with hybrid light on the function variations of the pH level and concentration of bleaching gels and prior acid etching of bovine enamel and the change in roughness and wear after simulated tooth brushing. Fragments of enamel (1.5 cm x 0.5 cm x 0.4 cm) were divided into two parts, one half as the control and the other as the test area. The latter was divided into two halves, one of which received the etching added to the whitening gel and the other with only the whitening gel. The specimens were randomly divided into six groups (n = 10): C = control; TBO35LH = 35% Total Blanc Office 1x session (5x8\') + activation with hybrid light LED/Laser; LPS35LH = 35% Lase Peroxide Sense - 1x session (5x8\') + activation with hybrid light LED/Laser; LPS25LH = 25% Sense Lase Peroxide - 1x session (5x8\') + activation with hybrid light LED/Laser; LPL15LH = 15% Lase Peroxide Lite - 1x session (5x8 \') + activation with hybrid light LED/Laser; LPL10LHV = 10% Lase Peroxide Lite - 1x session (5x8\') + activation with violet hybrid light LED/Laser. The arithmetic roughness (Ra) started after bleaching and after brushing was determined by averaging (μm) the three readings (in each area - with and without acid for a total of six readings per specimen) with a Rugosimeter Hommel Tester T 1000. The mean pH values were determined by the Sentron Model 1001 digital pH meter at the start and end times. The specimens were stored in artificial saliva for seven days, and subjected to 100,000 cycles of simulated brushing. After 24 hours, the surface wear was determined (μm) employing the same roughness meter. In relation to the change in wear and surface roughness, the results were evaluated by two way ANOVA testing for repeated measures and later, a Tukey\'s test. The data obtained from the pH readings were submitted to two way ANOVA testing for repeated measures and the Kruskal Wallis and Tukey tests for the comparisons between the individual groups. The significance level was set at 5% for all the tests. The roughness and wear showed statistical differences between the groups, especially when compared to the area with and without acid. The bleaching gels tended to decrease in pH from the starting time to the final time, however, a correlation with the roughness and wear could not be clearly established.
3
Blomlöf, Johan. "Root surface conditioning in periodontal treatment /." Stockholm, 1997. http://diss.kib.ki.se/1997/91-628-2646-8.
Full text
4
Adebayo, Olabisi. "The influence of surface characteristics on adhesion to enamel and dentine." Connect to thesis, 2009. http://repository.unimelb.edu.au/10187/6618.
Full textAbstract:
This body of research investigated the bonding efficiency of self-etching primer adhesives to enamel and dentine with various surface characteristics. A series of preliminary experiments was carried out to determine the effect of operator experience, dentine tubule orientation, bond strength test method and resin composite material used on bond strengths. The results of the preliminary tests concluded that it is essential to develop skills in material handling and the test methods used; 2-step self-etching primer adhesives exhibit higher but more variable microshear bond strengths (µSBS) than ‘all-in-one’ adhesives on dentine at different depths and tubule orientations; fracture toughness and bond strength test results suggest that the fracture toughness of a resin composite may not be of significant influence on microtensile and µSBS tests outcomes for nano-filled hybrid materials.An investigation of the bonding ability of self-etching primer adhesives under various tooth preparation conditions was carried out. Enamel and dentine specimens were prepared from human teeth and finished with various rotary cutting instruments and the erbium, chromium:yttrium, scandium, gallium, garnet laser. Specimens were bonded with two 2-step self-etching primer adhesives and two ‘all-in-one’ adhesives with a resin composite. The results showed that one of the 2-step adhesives exhibited higher but more variable µSBS than the ‘all-in-one’ adhesives and a silorane-based self-etching primer adhesive system to enamel and dentine.
The relationship between enamel microhardness and µSBS was evaluated. Enamel specimens were prepared and finished with one half of the surface tested for hardness using the Vickers test. The other half of the enamel surface was bonded using either a 2-step self-etching primer adhesive or an ‘all-in-one’ adhesive and a hybrid resin composite. Mean Vickers hardness numbers and µSBS for each enamel surface were calculated. Analysis using Pearson’s parametric test for regression analysis evaluated the correlation between Vickers hardness and µSBS. The results revealed a weak negative insignificant correlation between VHN and µSBS for the 2-step adhesive and no correlation for the ‘all-in-one’ adhesive.
The effect of conditioning and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) on bonding to bleached and unbleached enamel was investigated. Four groups of enamel specimens: untreated control; bleaching with 16% carbamide peroxide gel for 90 min daily x 14 days; treated with CPP-ACP paste (Tooth Mousse, GC Corp., Japan) for 60 min daily x 7 days and bleached and CPP-ACP-treated were used. The specimens were divided into a further two groups and bonded with a total-etch adhesive or a 2-step self-etching primer adhesive. Specimens bonded with the self-etching primer adhesive were sub-divided into four conditioning subgroups before bonding: no conditioning; 30 – 40% phosphoric; 15% EDTA; 20% polyacrylic acid. Specimens were tested in shear mode until failure and analysed by 2-way ANOVA, one-way ANOVA and Tukey’s post-hoc test. The µSBS of the total-etch adhesive was not affected by enamel treatment. Bleaching reduced the µSBS of the self-etching primer adhesive but preconditioning with phosphoric acid and polyacrylic acid improved bond strengths after CPP-ACP application. Bond failure analysis revealed a predominance of adhesive failures after bleaching, but prior conditioning reduced the proportion of adhesive failures. Scanning electron microscopy (SEM) revealed that the interfacial morphology produced by the 2-step self-etching primer adhesive was independent of enamel treatment except after bleaching. Phosphoric acid etching was not inhibited by CPP-ACP treatment. Resin tag formation was observed with prior phosphoric acid and polyacrylic acid conditioning.
The effect of conditioning and CPP-ACP application on dentine bonding was also investigated. Dentine specimens with and without the smear layer were prepared and divided into a further two groups, CPP-ACP paste applied to one group for 60 min daily x 7 days and the other group was untreated. The two groups were divided into three subgroups for conditioning: no conditioning; 30 - 40% phosphoric acid; 20% polyacrylic acid. The dentine was bonded using a 2-step self-etching primer adhesive and an ‘all-in-one’ adhesive, and tested as previously described. Statistical analysis was carried out using one-way ANOVA and Tukey’s post-hoc test at α = 0.05. The results showed that the µSBS of both adhesives were not significantly affected on smear-covered dentine but was affected on smearless dentine. Conditioning did not improve bond strengths. Bond failure analysis showed more adhesive failures for the ‘all-in-one’ adhesive, particularly on smearless dentine and with prior polyacrylic acid conditioning. SEM revealed a similar morphology of the bonded interface for the 2-step self-etching primer adhesive regardless of conditioning; and areas of bond failures for the ‘all-in-one’ adhesive.
The 2-step self-etching primer adhesives exhibited higher bond strength and more regular bond integrity than the ‘all-in-one’ adhesives, as shown on the SEM observations. However, the ‘all-in-one’ adhesives exhibited less variability in bond strengths to tooth surface characteristics.
5
Scheffel, Debora Lopes Salles [UNESP]. "Tempo de condicionamento da dentina hígida e afetada por cárie de dentes decíduos e permanentes: efeito na desmineralização do substrato, na produção e na resistência da união resina-dentina." Universidade Estadual Paulista (UNESP), 2010. http://hdl.handle.net/11449/88701.
Full textAbstract:
Made available in DSpace on 2014-06-11T19:23:35Z (GMT). No. of bitstreams: 0
Previous issue date: 2010-03-19Bitstream added on 2014-06-13T18:50:53Z : No. of bitstreams: 1
scheffel_dls_me_arafo.pdf: 1035533 bytes, checksum: e70561f0ad87f4e70ff9fc416abd9379 (MD5)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
O objetivo geral desse trabalho, dividido em três estudos, foi avaliar a influência do tempo de condicionamento ácido na desmineralização da dentina, na qualidade e no desempenho adesivo imediato da união resina-dentina de dentes decíduos e permanentes. No estudo 1, superfícies planas de dentina foram produzidas em molares decíduos e pré-molares (n=8). Sobre cada superfície, três áreas foram delimitadas e condicionadas com ácido fosfórico por 5, 10 ou 15 s. Decorrido o período pré-estabelecido de condicionamento, o ácido foi coletado e a concentração de cálcio dissolvido da dentina (ug Ca/mm2) foi determinada por microcolorimetria. Os dados foram analisados pela aplicação dos testes de ANOVA, Tukey e análise de regressão linear (α=0,05). Correlação positiva significante foi observada entre a concentração de cálcio e o tempo de condicionamento ácido para ambos, dentes decíduos e permanentes. Para todos os tempos de condicionamento, quantidades estatisticamente superiores de íons cálcio foram detectadas para a dentina de dentes decíduos em comparação a dentina de dentes permanentes. Foi concluído que a dentina de dentes decíduos é mais facilmente desmineralizada do que a dentina de dentes permanentes, e que essa desmineralização foi maior em função do aumento do tempo de aplicação do ácido. No estudo 2, superfícies planas de dentina também foram produzidas em outros 8 molares decíduos e 8 pré-molares hígidos. As superfícies foram divididas ao meio no sentido vestíbulo-lingual por meio de uma canaleta produzida com um disco diamantado. Aleatoriamente, cada metade foi condicionada com ácido fosfórico por 15 ou 5 s e os sistemas adesivos Prime&Bond NT ou Prime&Bond 2.1 foram aplicados. Espécimes envolvendo a interface de união foram produzidos e preparados em laboratório...
The aim of this work, divided into three studies, was to evaluate the influence of acid etching time on dentin demineralization, quality and immediate adhesive performance of resin-dentin bonds produced in deciduous and permanent teeth. In the first study, flat dentin surfaces were produced in sound molars (n=8) and premolars (n=8). On each surface, three circular areas were primary defined and etched with phosphoric acid for 5, 10 or 15 s. After the predetermined period of etching, the acid was collected and the calcium concentration (ugCa/mm2) was determined by microcolorimetry. The data were analyzed by ANOVA, Tukey and linear regression tests (α=0.05). Significant positive correlation was observed between calcium concentration and etching time for both deciduous and permanent teeth. For all times of conditioning, statistically higher amounts of calcium ions were removed from dentin of primary teeth compared to dentin of permanent teeth. It was concluded that the primary dentin was more prone to demineralization by phosphoric acid than permanent dentin, and that the extent of demineralization increased as a function of acid etching time. In the second study, flat dentin surfaces were also produced in additional 8 primary molars and 8 premolars. The surfaces were divided into mesial and distal halves through a shallow notch produced with a diamond disc. Randomly, each half was conditioned with 35% phosphoric acid for 15 or 5 s and the adhesive systems Prime & Bond NT or Prime & Bond 2.1 were applied. Specimens involving the bonded interface were produced and processed for staining with Goldner's trichrome. The thickness of the collagen zone exposed at the base of the hybrid layer (ZC) was measured using optical microscopy. Data were submitted to threeway analysis of variance and Tukey’s test (α=0.05). Overall, thicker ZC... (Complete abstract click electronic access below)
6
Scheffel, Debora Lopes Salles. "Tempo de condicionamento da dentina hígida e afetada por cárie de dentes decíduos e permanentes : efeito na desmineralização do substrato, na produção e na resistência da união resina-dentina /." Araraquara : [s.n.], 2010. http://hdl.handle.net/11449/88701.
Full textAbstract:
Orientador: Josimeri HeblingBanca: Lívia Maria Andaló Tenuta
Banca: Elisa Maria Aparecida Giro
Resumo: O objetivo geral desse trabalho, dividido em três estudos, foi avaliar a influência do tempo de condicionamento ácido na desmineralização da dentina, na qualidade e no desempenho adesivo imediato da união resina-dentina de dentes decíduos e permanentes. No estudo 1, superfícies planas de dentina foram produzidas em molares decíduos e pré-molares (n=8). Sobre cada superfície, três áreas foram delimitadas e condicionadas com ácido fosfórico por 5, 10 ou 15 s. Decorrido o período pré-estabelecido de condicionamento, o ácido foi coletado e a concentração de cálcio dissolvido da dentina (ug Ca/mm2) foi determinada por microcolorimetria. Os dados foram analisados pela aplicação dos testes de ANOVA, Tukey e análise de regressão linear (α=0,05). Correlação positiva significante foi observada entre a concentração de cálcio e o tempo de condicionamento ácido para ambos, dentes decíduos e permanentes. Para todos os tempos de condicionamento, quantidades estatisticamente superiores de íons cálcio foram detectadas para a dentina de dentes decíduos em comparação a dentina de dentes permanentes. Foi concluído que a dentina de dentes decíduos é mais facilmente desmineralizada do que a dentina de dentes permanentes, e que essa desmineralização foi maior em função do aumento do tempo de aplicação do ácido. No estudo 2, superfícies planas de dentina também foram produzidas em outros 8 molares decíduos e 8 pré-molares hígidos. As superfícies foram divididas ao meio no sentido vestíbulo-lingual por meio de uma canaleta produzida com um disco diamantado. Aleatoriamente, cada metade foi condicionada com ácido fosfórico por 15 ou 5 s e os sistemas adesivos Prime&Bond NT ou Prime&Bond 2.1 foram aplicados. Espécimes envolvendo a interface de união foram produzidos e preparados em laboratório... (Resumo completo, clicar acesso eletrônico abaixo)
Abstract: The aim of this work, divided into three studies, was to evaluate the influence of acid etching time on dentin demineralization, quality and immediate adhesive performance of resin-dentin bonds produced in deciduous and permanent teeth. In the first study, flat dentin surfaces were produced in sound molars (n=8) and premolars (n=8). On each surface, three circular areas were primary defined and etched with phosphoric acid for 5, 10 or 15 s. After the predetermined period of etching, the acid was collected and the calcium concentration (ugCa/mm2) was determined by microcolorimetry. The data were analyzed by ANOVA, Tukey and linear regression tests (α=0.05). Significant positive correlation was observed between calcium concentration and etching time for both deciduous and permanent teeth. For all times of conditioning, statistically higher amounts of calcium ions were removed from dentin of primary teeth compared to dentin of permanent teeth. It was concluded that the primary dentin was more prone to demineralization by phosphoric acid than permanent dentin, and that the extent of demineralization increased as a function of acid etching time. In the second study, flat dentin surfaces were also produced in additional 8 primary molars and 8 premolars. The surfaces were divided into mesial and distal halves through a shallow notch produced with a diamond disc. Randomly, each half was conditioned with 35% phosphoric acid for 15 or 5 s and the adhesive systems Prime & Bond NT or Prime & Bond 2.1 were applied. Specimens involving the bonded interface were produced and processed for staining with Goldner's trichrome. The thickness of the collagen zone exposed at the base of the hybrid layer (ZC) was measured using optical microscopy. Data were submitted to threeway analysis of variance and Tukey's test (α=0.05). Overall, thicker ZC... (Complete abstract click electronic access below)
Mestre
7
Francisconi, dos Rios Luciana Fávaro, Marcela Pagani Calabria, Leslie Casas-Apayco, Heitor Marques Honório, Marcela Rocha De Oliveira Carrilho, José Carlos Pereira, and Linda Wang. "Chlorhexidine does not improve but preserves bond strength to eroded dentin." American Journal of Dentistry, 2015. http://hdl.handle.net/10757/607304.
Full textAbstract:
El texto completo de este trabajo no está disponible en el Repositorio Académico UPC por restricciones de la casa editorial donde ha sido publicado.PURPOSE: To evaluate the effect of aqueous solutions of chlorhexidine digluconate (CHX) in different concentrations on bond strength to eroded dentin up to 6 months, using normal dentin as a control. METHODS: Exposed flat dentin of extracted third molars was only ground with 600-grit SiC paper/1 minute (normal dentin - N), or subsequently eroded by a regular-cola soft-drink (eroded dentin - E). N and E were acid-etched, washed, dried and rehydrated with 1.5 μL, respectively, of distillated water (control - NC / EC); of 0.004% CHX (N0.004% / E0.004%); or of 2% CHX (N2% / E2%). Adper Single Bond 2 was applied in all specimens and resin composite buildups were constructed with Filtek Z350. Specimens were sectioned in beams, which were tested (μTBS) immediately or after 6 months of aging. RESULTS: Microtensile bond strength to eroded dentin was always significantly lower than that to normal dentin. Application of tested CHX solutions did not exert a significant effect immediately; however, after aging, the 2% CHX prevented abrupt bond strength loss both to eroded and normal dentin.
Revisión por pares
8
Francisconi, dos Rios Luciana Fávaro, Leslie Casas-Apayco, Marcela Pagani Calabria, Paulo Afonso Silveria Francisconi, Ana Flávia Sanches Borges, and Linda Wang. "Role of chlorhexidine in bond strength to artificially eroded dentin over time." Quintessence Publishing Group, 2015. http://hdl.handle.net/10757/607257.
Full textAbstract:
El texto completo de este trabajo no está disponible en el Repositorio Académico UPC por restricciones de la casa editorial donde ha sido publicado.PURPOSE: To assess the long-term effect of a 2% aqueous chlorhexidine (CHX) solution on bond strength to artificially eroded dentin compared to sound dentin. MATERIALS AND METHODS: Flat mid-coronal dentin surfaces of extracted third molars (n = 28) were subjected only to grinding with a 600-grit SiC paper for 1 min (sound dentin S, n = 14) or additionally to erosive pH cycling with a cola-based soft-drink (eroded dentin E, n = 14). After acid etching, rinsing, and air drying, S and E were rehydrated with 1.5 μl of 2% CHX (S2%, n = 7; E2%, n = 7) or of distilled water (control SC, n = 7; EC, n = 7). Composite buildups were incrementally constructed with Filtek Z350 following Adper Single Bond 2 application. Specimens were sectioned into beams, which were subjected to microtensile testing immediately or after 6 or 12 months of aging. Fractured surfaces were observed under a digital microscope (50X magnification). Microtensile bond strength (μTBS) (MPa) was analyzed by three-way ANOVA and Tukey's tests (α = 0.05) and failure mode by the Kruskal-Wallis test (α = 0.05). RESULTS: Compared to sound dentin, eroded dentin was consistently related to lower μTBS. Immediately and after 12-month aging, the effect of CHX was insignificant, but it was significant after 6-month aging, when it conserved the bond strength to both eroded and sound dentin. The percentage of adhesive and mixed failures were equivalent, and significantly more frequent than cohesive failures, whether in dentin or in composite. CONCLUSION: The 2% CHX effect on bond strength conservation to both eroded and sound dentin was not found to be persistent.
Revisión por pares
9
Wang, Linda, Leslie Casas-Apayco, Ana Carolina Hipólito, Vanessa Manzini Dreibi, Marina Ciccone Giacomini, Júnior Odair Bim, Daniela Rios, and Ana Carolina Magalhães. "Effect of simulated intraoral erosion and/or abrasion effects on etch-and-rinse bonding to enamel." American Journal of Dentistry, 2014. http://hdl.handle.net/10757/612019.
Full textAbstract:
El texto completo de este trabajo no está disponible en el Repositorio Académico UPC por
restricciones de la casa editorial donde ha sido publicado.PURPOSE: To assess the influence of simulated oral erosive/abrasive challenges on the bond strength of an etch-and-rinse two-step bonding system to enamel using an in situ/ex vivo protocol. METHODS: Bovine enamel blocks were prepared and randomly assigned to four groups: CONT - control (no challenge), ABR - 3x/day-1 minute toothbrushing; ERO - 3x/day - 5 minutes extraoral immersion into regular Coca Cola; and ERO+ABR - erosive protocol followed by a 1-minute toothbrushing. Eight blocks were placed into an acrylic palatal appliance for each volunteer (n = 13), who wore the appliance for 5 days. Two blocks were subjected to each of the four challenges. Subsequently, all the blocks were washed with tap water and Adper Single Bond 2/Filtek Z350 were placed. After 24 hours, 1 mm2 beams were obtained from each block to be tested with the microtensile bond strength test (50 N load at 0.5 mm/minute). The data were statistically analyzed by one-way RM-ANOVA and Tukey's tests (alpha = 0.05). RESULTS: No difference was detected among the ABR, ERO, and CONT groups (P > 0.05). ERO+ABR group yielded lower bond strengths than either the ABR and ERO groups (P < 0.0113).
Revisión por pares
10
Yeslam, Hanin E. (Essam). "The effect of acid etching on remineralization of incipient caries lesions : a micro-ct study." Thesis, 2009. http://hdl.handle.net/1805/2084.
Full textAbstract:
Indiana University-Purdue University Indianapolis (IUPUI)Etching of enamel caries lesions has been demonstrated to enhance remineralization. However, this effect reaches a plateau after a period of time. This study aimed at investigating the effectiveness of additional acid etching on remineralization. Forty 1 mm × 2 mm human enamel blocks with chemically induced artificial incipient lesions were used. Ten specimens were randomly selected at the end of demineralization for transverse microradiography (TMR) analysis. The remaining specimens were then divided into three groups (n = 10). Group A was remineralized by a pH cycling system with 1100 ppm sodium fluoride for 20 days. In group B, the specimens were etched with 35-percent phosphoric acid for 30 s and then remineralized. Group C was remineralized by same procedure as group B plus and given an additional acid etch after 10 days of remineralization. Mineral density was measured by x-ray microtomography (µ-CT). The volumetric mineral content [VM (µm3×105)] was determined between 91 and 0-wt%. The µ-CT % mineral recovery (%) was calculated using the formula 100×(remineralize VM - demineralization VM) / (sound VM - demineralization VM). One-hundred-μm sections of demineralized and remineralized specimens were used to assess the mineral loss (IML: vol%×µm) and lesion depth (µm) using TMR. The three groups showed no significant difference in mineral change or mineral content for µ-CT or TMR lesion depth. The TMR IML showed a significant difference between the demineralized specimens and the three remineralized groups. The correlation between TMR IML and TMR lesion depth was 0.66 (p < 0.0001). The µ-CT percent mineral recovery from demineralization was correlated with neither TMR IML nor TMR lesion depth. When evaluated with µ-CT, the twice-acid-etched group presented lower mineral gain values than the group etched only once with acid. Also, the twice-etched group presented lower mineral gain and greater TMR IML compared with the non-acid etch group. TMR images revealed reduction of surface layer in the acid-etched groups, especially in the twice-etched group, in which significant reduction or loss of surface layer occurred. Based on these results, we conclude that additional acid etching with 35-percent phosphoric acid does not enhance remineralization compared with a single application of acid etching. We believe that the viable existence of the surface layer is essential for remineralization of the lesion. Further investigations into the accuracy of µ-CT to detect minute mineral changes in incipient caries lesions are probably needed.
Book chapters on the topic "Tooth Remineralization Acid Etching"
1
Gomes, George, Filipa Oliveira, and Jorge Perdigão. "At-Home Tray Whitening and Resin Infiltration After Acid Etching with HCl." In Tooth Whitening, 239–46. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-38849-6_13.
Full text
2
Sadyrin, Evgeniy V., Evgeniy A. Kislyakov, Roman V. Karotkiyan, Diana V. Yogina, Ekaterina G. Drogan, Michael V. Swain, Stanislav Yu Maksyukov, Andrey L. Nikolaev, and Sergei M. Aizikovich. "Influence of Citric Acid Concentration and Etching Time on Enamel Surface Roughness of Prepared Human Tooth: in vitro Study." In Plasticity, Damage and Fracture in Advanced Materials, 135–50. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-34851-9_8.
Full text
3
Deery, C., and K. J. Toumba. "Diagnosis and prevention of dental caries." In Paediatric Dentistry. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198789277.003.0015.
Full textAbstract:
Almost all research on the process of dental caries supports the chemoparasitic theory proposed by W.D. Miller in 1890. This is now more commonly known as the acidogenic theory of caries aetiology. The main features of the caries process are as follows. 1. Fermentation of carbohydrate to organic acids by micro-organisms in plaque on the tooth surface. 2. Acid production, which lowers the pH at the enamel surface below the level (the critical pH) at which enamel will dissolve. 3. When carbohydrate is no longer available to the plaque microorganisms, the pH within plaque will rise because of the outward diffusion of acids and their metabolism and neutralization in plaque, so that remineralization of enamel can occur; 4. Dental caries progresses only when the balance between demineralization and remineralization favours the former. The realization that demineralization and remineralization are in equilibrium is key to understanding the dynamics of the carious lesion and its prevention. One of the interesting features of an initial carious lesion of the enamel is that the lesion is subsurface, i.e. most of the mineral loss occurs beneath a relatively intact enamel surface. This contrasts strongly with the histological appearance of enamel after a clean tooth surface has been exposed to acid, where the surface is etched and there is no subsurface lesion. This dissolution of the surface of enamel, or etching, is a feature of enamel erosion caused, among other things, by dietary acids. Therefore the carious process and erosion differ completely, as erosion is a surface phenomenon. The explanation for the intact surface layer in enamel caries seems to lie in diffusion dynamics: the layer of dental plaque on the tooth surface acts as a partial barrier to diffusion. Further erosion occurs at much lower pH values (pH <4) than caries. Dental plaque forms on uncleaned tooth surfaces and is readily apparent if toothbrushing is stopped for 2–3 days. Contrary to popular opinion, plaque does not consist of food debris, but is a biofilm; 70% is comprised of micro-organisms—about 100 million organisms per milligram of plaque. When plaque is young cocci predominate, but as plaque ages the proportions of filamentous organisms and veillonellae increase.