Relevant bibliographies by topics / Topologies for axial flux machines

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Topologies for axial flux machines'

Author: Grafiati
Published: 4 June 2021
Last updated: 2 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Topologies for axial flux machines.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Topologies for axial flux machines"

1

Torkaman, Hossein, Aghil Ghaheri, and Ali Keyhani. "Axial flux switched reluctance machines: a comprehensive review of design and topologies." IET Electric Power Applications 13, no. 3 (2019): 310–21. http://dx.doi.org/10.1049/iet-epa.2018.5190.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Tokgöz, Furkan, Gökhan Çakal, and Ozan Keysan. "Comparison of PCB winding topologies for axial‐flux permanent magnet synchronous machines." IET Electric Power Applications 14, no. 13 (2020): 2577–86. http://dx.doi.org/10.1049/iet-epa.2020.0622.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Huang, Rundong, Chunhua Liu, Zaixin Song, and Hang Zhao. "Design and Analysis of a Novel Axial-Radial Flux Permanent Magnet Machine with Halbach-Array Permanent Magnets." Energies 14, no. 12 (2021): 3639. http://dx.doi.org/10.3390/en14123639.

Full text
Abstract:
Electric machines with high torque density are needed in many applications, such as electric vehicles, electric robotics, electric ships, electric aircraft, etc. and they can avoid planetary gears thus reducing manufacturing costs. This paper presents a novel axial-radial flux permanent magnet (ARFPM) machine with high torque density. The proposed ARFPM machine integrates both axial-flux and radial-flux machine topologies in a compact space, which effectively improves the copper utilization of the machine. First, the radial rotor can balance the large axial forces on axial rotors and prevent t
APA, Harvard, Vancouver, ISO, and other styles
4

Jia, Lun, Keman Lin, Mingyao Lin, Wei Le, and Shai Wang. "Comparative Analysis of Dual-Rotor Modular Stator Axial-Flux Permanent Magnet Machines With Different Rotor Topologies." IEEE Transactions on Applied Superconductivity 31, no. 8 (2021): 1–5. http://dx.doi.org/10.1109/tasc.2021.3091124.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pippuri, Jenni, Aino Manninen, Janne Keranen, and Kari Tammi. "Torque Density of Radial, Axial and Transverse Flux Permanent Magnet Machine Topologies." IEEE Transactions on Magnetics 49, no. 5 (2013): 2339–42. http://dx.doi.org/10.1109/tmag.2013.2238520.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Neethu, S., K. S. Shinoy, and A. S. Shajilal. "Efficiency Improvement of an Axial Flux Permanent Magnet Brushless DC Motor for LVAD Application." Applied Mechanics and Materials 110-116 (October 2011): 4661–68. http://dx.doi.org/10.4028/www.scientific.net/amm.110-116.4661.

Full text
Abstract:
This paper presents the Finite Element Analysis (FEA) based design, optimization and development of an axial flux permanent magnet brushless DC motor for Left Ventricular Assist Device (LVAD). With the design objective of improving the existing motor's efficiency , different topologies of AFPM machine has been examined. Selection of optimal magnet frac-tion, Halbach arrangement of rotor magnets and the use of Soft Magnetic Composite (SMC) material for the stator core results in a novel motor with improved efficiency and torque profile. The results of the 3D Finite element analysis for the nove
APA, Harvard, Vancouver, ISO, and other styles
7

Yoo, Seong-yeol, Young-Woo Park, and Myounggyu Noh. "Topology Selection and Parametric Design of Electromagnetic Vibration Energy Harvesters by Combining FEA-in-the-Loop and Analytical Approaches." Energies 13, no. 3 (2020): 627. http://dx.doi.org/10.3390/en13030627.

Full text
Abstract:
Electromagnetic energy harvesters have been used to capture low-frequency vibration energy of large machines such as diesel generators. The structure of an electromagnetic energy harvester is either planar or tubular. Past research efforts focus on optimally designing each structure separately. An objective comparison between the two structures is necessary in order to decide which structure is advantageous. When comparing the structures, the design variations such as magnetization patterns and the use of yokes must also be considered. In this study, extensive comparisons are made covering all
APA, Harvard, Vancouver, ISO, and other styles
8

Paul, Sarbajit, Mohammad Farshadnia, Alireza Pouramin, John Fletcher, and Junghwan Chang. "Comparative analysis of wave winding topologies and performance characteristics in ultra‐thin printed circuit board axial‐flux permanent magnet machine." IET Electric Power Applications 13, no. 5 (2019): 694–701. http://dx.doi.org/10.1049/iet-epa.2018.5417.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Ogidi, Oladapo Omotade, Paul S. Barendse, and Mohamed Azeem Khan. "Influence of Rotor Topologies and Cogging Torque Minimization Techniques in the Detection of Static Eccentricities in Axial-Flux Permanent-Magnet Machine." IEEE Transactions on Industry Applications 53, no. 1 (2017): 161–70. http://dx.doi.org/10.1109/tia.2016.2616320.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Nuca, I., T. Ambros, M. Burduniuc, S. I. Deaconu, and A. Turcanu. "Electric machines with axial magnetic flux." IOP Conference Series: Materials Science and Engineering 294 (January 2018): 012059. http://dx.doi.org/10.1088/1757-899x/294/1/012059.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Topologies for axial flux machines"

1

Yilmaz, Kurtulus. "Comparison Of Axial Flux And Radial Flux Brushless Dc Motor Topologies For Control Moment Gyroscope Wheel Applications." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/12610565/index.pdf.

Full text
Abstract:
In this thesis axial flux and radial flux brushless dc motors will be studied as a drive motor for the control of moment gyroscope wheel. Design equations for axial flux and radial flux brushless dc motor topologies will be reviewed. Based on these equations radial and axial flux motors with different number of poles will be designed that meet control moment gyroscope wheel application requirements. The results will be evaluated in terms of efficiency, torque/mass and torque/volume, and suitability for the control moment gyroscope application.
APA, Harvard, Vancouver, ISO, and other styles
2

Osório, Jonas Obert Martins. "Análise da máquina Torus sob frenagem eletrodinâmica." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2011. http://hdl.handle.net/10183/38777.

Full text
Abstract:
Este trabalho foi desenvolvido com o objetivo de estudar a aplicação, para sistema de frenagem veicular, de uma máquina elétrica sem escovas, de armadura toroidal, e fluxo magnético axial produzido por ímãs permanentes de terras raras, a chamada máquina Torus. A máquina foi construída no LMEAE e estudada inicialmente como motor em outro trabalho. Mas, para que se possa avaliar seu funcionamento em sistema de frenagem, o foco é do ponto de vista da máquina como gerador. São realizados testes dinâmicos e estáticos experimentalmente e modelo numérico pelo método dos elementos finitos com um forma
APA, Harvard, Vancouver, ISO, and other styles
3

Pop, Adrian Augustin. "Contributions à l'étude des petites machines électriques à aimants permanents, à flux axial et à auto-commutation électronique." Phd thesis, Ecole Centrale de Lille, 2012. http://tel.archives-ouvertes.fr/tel-00804669.

Full text
Abstract:
Les travaux de recherche présentés dans cette thèse concernent les petites machines à aimants permanents, à flux axial et à auto-commutation électronique ayant la topologie d'un rotor intérieur discoïdal avec des aimants Nd-Fe-B montés en surface et de deux stators extérieurs identiques, chacun avec enroulement triphasé distribué dans des encoches. Après l'examen des topologies candidates pour applications d'entraînement direct basse-vitesse, une modélisation électromagnétique analytique de pré-dimensionnement d'un prototype de telles machines est réalisée. Ensuite, une approche numérique orig
APA, Harvard, Vancouver, ISO, and other styles
4

Martin, Richard. "Axial flux permanent magnet machines for direct drive applications." Thesis, Durham University, 2007. http://etheses.dur.ac.uk/2567/.

Full text
Abstract:
This thesis explores aspects of the design, analysis, and experimental test of permanent magnet axial flux machines for use in diesel engine generator sets, vertical axis wind turbines, and wheel motors for solar cars. The characteristic geometry of axial flux machines is naturally more suitable than that of conventional topologies in certain applications. However, convenient and accurate methods of electromagnetic design and analysis are less well established for such machines. The purpose of the research described herein is to benchmark a range of methods of analysis which can be extended to
APA, Harvard, Vancouver, ISO, and other styles
5

Lomheim, Sigbjørn. "Analysis of a Novel Coil Design for Axial Flux Machines." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elkraftteknikk, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-23649.

Full text
Abstract:
A novel coil design for permanent magnet axial flux machines is presented. An analysis of its performance regarding winding layout, cooling capability, cogging torque, and back-EMF is conducted. Different manufacturing and assembly methods are described. A prototype stator has been built and tested. The prototype stator has a 90% fill factor, and is an iron free wave-winded topology. The prototype has been analyzed using analytical approaches, and compared to the performance in the laboratory testing. An analysis of introducing iron in the stator has been done, where the effect of iron stator
APA, Harvard, Vancouver, ISO, and other styles
6

Howey, David A. "Thermal design of air-cooled axial flux permanent magnet machines." Thesis, Imperial College London, 2010. http://hdl.handle.net/10044/1/5588.

Full text
Abstract:
Accurate thermal analysis of axial flux permanent magnet (AFPM) machines is crucial in predicting maximum power output, and a number of heat transfer paths exist making it difficult to undertake a general analysis. Stator convective heat transfer is one of the most important and least investigated heat transfer mechanisms and therefore is the focus of the present work. Experimental measurements were undertaken using a thin-film electrical heating method based on a printed circuit board heater array, providing radially resolved steady state heat transfer data from an experimental rotor-stator s
APA, Harvard, Vancouver, ISO, and other styles
7

Ogidi, Oladapo Omotade. "Modelling and detection of faults in axial-flux permanent magnet machines." Doctoral thesis, University of Cape Town, 2016. http://hdl.handle.net/11427/20831.

Full text
Abstract:
The development of various topologies and configurations of axial-flux permanent magnet machine has spurred its use for electromechanical energy conversion in several applications. As it becomes increasingly deployed, effective condition monitoring built on reliable and accurate fault detection techniques is needed to ensure its engineering integrity. Unlike induction machine which has been rigorously investigated for faults, axial-flux permanent magnet machine has not. Thus in this thesis, axial-flux permanent magnet machine is investigated under faulty conditions. Common faults associated wi
APA, Harvard, Vancouver, ISO, and other styles
8

Walker, Alan Michael. "Axial flux permanent magnet electric machines for hybrid electric vehicle powertrains." Thesis, Imperial College London, 2006. http://hdl.handle.net/10044/1/8911.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Laoubi, Yanis. "Modélisation des machines électriques par les réseaux de perméances génériques : cas des machines à flux axial." Thesis, Normandie, 2017. http://www.theses.fr/2017NORMLH17.

Full text
Abstract:
Le travail présenté dans ce mémoire traite de la problématique du dimensionnement de structures innovantes de génératrices, à savoir les machines à flux axial ou encore discoïdes, destinées aux éoliennes de grande puissance allant jusqu'à deux dizaines de mégawatts. Les machines synchrones à aimants permanents à flux axial étant intrinsèquement tridimensionnelles, l'optimisation de leur dimensionnement nécessite un modèle dimensionnant tridimensionnel et multiphysique qui peut être, de par sa nature 3D, très consommateur en mémoire et en temps de calcul. On se propose donc, dans ce mémoire, de
APA, Harvard, Vancouver, ISO, and other styles
10

Taran, Narges. "Optimum Design of Axial Flux PM Machines based on Electromagnetic 3D FEA." UKnowledge, 2019. https://uknowledge.uky.edu/ece_etds/145.

Full text
Abstract:
Axial flux permanent magnet (AFPM) machines have recently attracted significant attention due to several reasons, such as their specific form factor, potentially higher torque density and lower losses, feasibility of increasing the number of poles, and facilitating innovative machine structures for emerging applications. One such machine design, which has promising, high efficiency particularly at higher speeds, is of the coreless AFPM type and has been studied in the dissertation together with more conventional AFPM topologies that employ a ferromagnetic core. A challenge in designing coreles
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Topologies for axial flux machines"

1

Gieras, Jacek F. Axial flux permanent magnet brushless machines. 2nd ed. Springer, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gieras, Jacek F., Rong-Jie Wang, and Maarten J. Kamper. Axial Flux Permanent Magnet Brushless Machines. Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-8227-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gieras, Jacek F. Axial flux permanent magnet brushless machines. Kluwer Academic, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wang, Rong-Jie, Maarten J. Kamper, and Jacek F. Gieras. Axial Flux Permanent Magnet Brushless Machines. Springer, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wang, Rong-Jie, Maarten J. Kamper, and Jacek F. Gieras. Axial Flux Permanent Magnet Brushless Machines. Springer, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Axial Flux Permanent Magnet Brushless Machines. Kluwer Academic Publishers, 2005. http://dx.doi.org/10.1007/1-4020-2720-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wang, Rong-Jie, Maarten J. Kamper, and Jacek F. Gieras. Axial Flux Permanent Magnet Brushless Machines. Springer, 2014.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Topologies for axial flux machines"

1

Lin, Jianing (Joanna). "Axial Flux Switched Reluctance Machines." In Switched Reluctance Motor Drives. CRC Press, 2019. http://dx.doi.org/10.1201/9780203729991-15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mellara, Beatrice, and Ezio Santini. "FEM Computation of Ld and Lq in Axial Flux Disc Machines." In Electric and Magnetic Fields. Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-1961-4_74.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Husain, Tausif, and Yilmaz Sozer. "Axial Flux Machines." In Compendium on Electromagnetic Analysis. World Scientific, 2020. http://dx.doi.org/10.1142/9789813270282_0007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

"Principles of AFPM Machines." In Axial Flux Permanent Magnet Brushless Machines. Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-8227-6_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"AFPM Machines With Iron Cores." In Axial Flux Permanent Magnet Brushless Machines. Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-8227-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

"AFPM Machines Without Stator Cores." In Axial Flux Permanent Magnet Brushless Machines. Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-8227-6_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

"AFPM Machines Without Stator and Rotor Cores." In Axial Flux Permanent Magnet Brushless Machines. Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-8227-6_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

"Introduction." In Axial Flux Permanent Magnet Brushless Machines. Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-8227-6_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

"Materials and Fabrication." In Axial Flux Permanent Magnet Brushless Machines. Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-8227-6_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

"Control." In Axial Flux Permanent Magnet Brushless Machines. Springer Netherlands, 2008. http://dx.doi.org/10.1007/978-1-4020-8227-6_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Topologies for axial flux machines"

1

Di Gerlando, Antonino, Giovanni Maria Foglia, Matteo Felice Iacchetti, and Roberto Perini. "Analysis of stray paths for parasitic currents in some topologies of Yokeless and Segmented Armature Axial Flux PM Machines." In 2014 XXI International Conference on Electrical Machines (ICEM). IEEE, 2014. http://dx.doi.org/10.1109/icelmach.2014.6960210.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Paul, S., M. Farshadnia, A. Pouramin, J. Fletcher, and J. Chang. "Printed Circuit Axial-Flux Permanent Magnet Machines: A Comparative Analysis of Their PCB Topologies and Performance Characteristics." In 2018 IEEE International Magnetic Conference (INTERMAG). IEEE, 2018. http://dx.doi.org/10.1109/intmag.2018.8508182.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Chuan, Hawwooi, Richard Burke, and Zhongze Wu. "A Comparative Study on Different Cooling Topologies for Axial Flux Permanent Magnet Machine." In 2019 IEEE Vehicle Power and Propulsion Conference (VPPC). IEEE, 2019. http://dx.doi.org/10.1109/vppc46532.2019.8952185.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jung, J., and W. Hofmann. "Comparison of two concentrated winding topologies applied on an axial flux permanent magnet machine." In 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe). IEEE, 2015. http://dx.doi.org/10.1109/epe.2015.7311729.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fei, W., and P. Luk. "Performance study of two axial-flux permanent-magnet machine topologies with soft magnetic composite cores." In 2009 IEEE 6th International Power Electronics and Motion Control Conference. IEEE, 2009. http://dx.doi.org/10.1109/ipemc.2009.5157422.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Taran, Narges, Greg Heins, Vandana Rallabandi, Dean Patterson, and Dan M. Ionel. "Systematic Comparison of Two Axial Flux PM Machine Topologies: Yokeless and Segmented Armature versus Single Sided." In 2019 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2019. http://dx.doi.org/10.1109/ecce.2019.8913104.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ogidi, Oladapo O., Paul S. Barendse, and Mohamed A. Khan. "Influence of rotor topologies and cogging torque minimization techniques on axial-flux permanent magnet machine under static eccentricities." In 2015 IEEE Energy Conversion Congress and Exposition. IEEE, 2015. http://dx.doi.org/10.1109/ecce.2015.7309916.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Li, Dawei, Ronghai Qu, and Jian Li. "Topologies and analysis of flux-modulation machines." In 2015 IEEE Energy Conversion Congress and Exposition. IEEE, 2015. http://dx.doi.org/10.1109/ecce.2015.7309964.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Malloy, Adam C., Adrian Mlot, Mark J. Cordner, and Michael Lamperth. "Axial flux machines for hybrid module applications." In 2014 IEEE International Electric Vehicle Conference (IEVC). IEEE, 2014. http://dx.doi.org/10.1109/ievc.2014.7056159.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lee, Minhyeok, and Kwanghee Nam. "Flux concentrating axial ferrite magnet motor." In 2015 IEEE International Electric Machines & Drives Conference (IEMDC). IEEE, 2015. http://dx.doi.org/10.1109/iemdc.2015.7409078.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Topologies for axial flux machines' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography