Log in

Relevant bibliographies by topics / Transporting machines

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers

Academic literature on the topic 'Transporting machines'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Transporting machines.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Transporting machines"

1

Kipriyanov, F. A., and Yu A. Plotnikova. "DETERMINATION OF GRAIN MOTION MODE ON A VIBRATORY SURFACE." Vestnik Altajskogo gosudarstvennogo agrarnogo universiteta, no. 9 (2021): 81–87. http://dx.doi.org/10.53083/1996-4277-2021-203-09-81-87.

Full text

Abstract:

he use of vibration transport in agricultural production plays a very significant part. Vibratory conveyors have the variety of advantages over traditional transporting ma-chines such as auger and belt type conveyors used at agri-cultural enterprises for transporting mainly loose and granular materials. A rather low wear coefficient of trans-porting body itself - a conveying trough of a vibration-transporting machine may be referred to the advantages, besides, in some constructions of vibration-transporting machines the amount of friction couples is reduced to a minimum. In the design of const

APA, Harvard, Vancouver, ISO, and other styles

2

Liberman, Ya L., and L. N. Gorbunova. "WAYS TO REDUCE ENERGY CONSUMPTION BY TRANSPORTING MACHINES." Mining Equipement and Electromechanics 145, no. 5 (2019): 23–28. http://dx.doi.org/10.26730/1816-4528-2019-5-23-28.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kutseba, S. A., A. A. Shevchenko, P. A. Chukalovskii, P. A. Butyagin, and �. A. Mal'vinov. "Use of polymeric transporting cylinders for PNSh machines." Fibre Chemistry 20, no. 1 (1988): 59–61. http://dx.doi.org/10.1007/bf00544767.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Syromyatnikov, Yuriy, Aleksandr Kuts, Irina Troyanovskaya, Alexandra Orekhovskaya, Evgeny Tikhonov, and Viktoriia Sokolova. "Transporting Ability Calculation of the Rotor of Soil-Cultivating Loosening and Separating Vehicle." Acta Technologica Agriculturae 25, no. 2 (2022): 73–78. http://dx.doi.org/10.2478/ata-2022-0012.

Full text

Abstract:

Abstract Currently, loosening and separating machines that combine the operations of crumbling and separating of soil according to the treated layer depth have come to the forefront. Interaction of the rotor blade of these machines with the soil comprises three stages: soil core formation; steady movement; and dumping of soil from the separating grid. The article determined the direction and magnitude of soil displacement, parameters and shape of the furrow formed after the ripper passage. Based on theoretical research, a mathematical model of the interaction of working bodies with the soil wa

APA, Harvard, Vancouver, ISO, and other styles

5

Aljawadi, Rafea A. M., Desa Ahmad, Nazmi M. Nawi, Muhamad S. M. Kassim, and Wan I. W. Ismail. "A Review of the In-Field Transporting Machines Currently Used in Oil Palm Plantations in Malaysia." Basrah Journal of Agricultural Sciences 34 (August 20, 2021): 119–37. http://dx.doi.org/10.37077/25200860.2021.34.sp1.13.

Full text

Abstract:

This paper focuses on the in-field transporting machines currently used in oil palm plantations in Malaysia. It highlights the field conditions, the capacity of the machines and the time of completion of the transporting process which help to identify the determinants of the development of agricultural mechanization in Malaysian oil palm plantations. Understanding of the issues will help facilitate the elimination of weaknesses and defects prior to the manufacturing or modification stage. This will assist designers and manufacturers in the development and production of improved and more effici

APA, Harvard, Vancouver, ISO, and other styles

6

罗, 攸坤. "The Equipment for Lifting and Transporting Packaging Tobacco Machines." Instrumentation and Equipments 12, no. 03 (2024): 445–54. http://dx.doi.org/10.12677/iae.2024.123057.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Sasov, Alexander, Dmytro Shmatko, and Dmytro Kostenko. "THEORETICAL RESEARCH OF OSCILLATIONS OF BEARING SYSTEMS PORTAL MACHINES ON PNEUMATIC WHEELS." Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences) 1, no. 44 (2024): 73–82. http://dx.doi.org/10.31319/2519-2884.44.2024.9.

Full text

Abstract:

In the article, theoretical studies of the disturbed motion of oscillation of the carrier system of the gantry machine on pneumatic wheels are carried out. Mathematical models of load formation on the frame of the load-bearing system of the lifting and transporting machine in the longitudinal and transverse vertical planes are presented. Equations of natural frequencies of the system have been obtained, which allow to determine at the stage of designing the elements of the supporting systems of gantry machines the operating modes of the machine in the pre-resonance or post-resonance zone.

APA, Harvard, Vancouver, ISO, and other styles

8

Dvoretskyi, V. I. "NORMATIVE AND TECHNICAL REGULATION OF WORKS TO INCREASE THE VEHICLES RESOURCE." Science and Transport Progress, no. 13 (December 25, 2006): 103–7. http://dx.doi.org/10.15802/stp2006/18313.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Nosenko, A. S., A. A. Domnitskiy, V. V. Nosenko, M. S. Altunina, V. V. Zubov, and I. A. Kirsanov. "Combine technology in construction of transport tunnels." IOP Conference Series: Earth and Environmental Science 839, no. 5 (2021): 052043. http://dx.doi.org/10.1088/1755-1315/839/5/052043.

Full text

Abstract:

Abstract Article reviews the questions of using the combine technology in construction of transport tunnels with mechanized mining, taking into account the standard being developed, which establishes characteristic features and procedures of classifying the tunnels in public roads. Restrictions in connection to environmental safety of transport activities are specified. It was suggested, along with tunnelling machines of selective effect, to use reloaders with reciprocated motion of traction transporting units and with variable geometry of transporting elements.

APA, Harvard, Vancouver, ISO, and other styles

10

Ringdahl, Ola, Thomas Hellström, and Ola Lindroos. "Potentials of possible machine systems for directly loading logs in cut-to-length harvesting." Canadian Journal of Forest Research 42, no. 5 (2012): 970–85. http://dx.doi.org/10.1139/x2012-036.

Full text

Abstract:

In conventional mechanized cut-to-length systems, a harvester fells and cuts trees into logs that are stored on the ground until a forwarder picks them up and carries them to landing sites. A proposed improvement is to place logs directly into the load spaces of transporting machines as they are cut. Such integrated loading could result in cost reductions, shorter lead times from stump to landing, and lower fuel consumption. However, it might also create waiting times for the machines involved, whereas multifunctional machines are likely to be expensive. Thus, it is important to analyze whethe

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Transporting machines"

1

Муріков, Дмитро Володимирович, Дмитрий Владимирович Муриков, Dmytro Volodymyrovych Murikov та ін. "Вирівнювальний механізм для ланцюгових тягових органів транспортуючих машин". Thesis, Видавництво СумДУ, 2012. http://essuir.sumdu.edu.ua/handle/123456789/27712.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Barcuch, Libor. "Transportní zařízení pro dopravu kusových předmětů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318842.

Full text

Abstract:

This master’s thesis is dealing with the conveying machines used for transport of piece goods. The thesis is divided into theoretical and practical part. In the first part is performed overview of the most widely used conveyors. Second part of this thesis is focused on creating design of conveyor system for distribution centre with required line throughput.

APA, Harvard, Vancouver, ISO, and other styles

3

Михалевич, О. Т. "Резерви покращення експлуатаційних параметрів складних газотранспортних систем". Thesis, Івано-Франківський національний технічний університет нафти і газу, 2007. http://elar.nung.edu.ua/handle/123456789/4203.

Full text

Abstract:

Дисертацію присвячено удосконаленню методів керування неусталеними неізотермічними режимами газотранспортних систем на компресорних станціях і в лінійній частині трубопроводу. Проведено аналітичні дослідження термогазодинамічних процесів у складних системах. Встановлено закономірності розподілу потоку газу при змінних геометричних характеристиках і характеру гідравлічного опору, що дозволило створити новий концептуальних підхід до створення моделі керування режимами: а) математичну модель транспортної мережі з використанням методу ув’язки по вузлам; б) математичну модель газотранспортної мереж

APA, Harvard, Vancouver, ISO, and other styles

4

Барановський, Віктор Миколайович, Виктор Николаевич Барановський та V. M. Baranovsky. "Механіко-технологічні основи розробки адаптованих коренезбиральних машин". Thesis, Тернопільський національний технічний університет ім. Івана Пулюя, 2013. http://elartu.tntu.edu.ua/handle/123456789/2572.

Full text

Abstract:

Робота виконана у Тернопільському національному технічному університеті імені Івана Пулюя Міністерства освіти і науки України. Захист відбувся в 2013 році на засіданні спеціалізованої вченої ради Д 58.052.02 в Тернопільському національному технічному університеті імені Івана Пулюя за адресою: 46001, м. Тернопіль, вул. Руська, 56, аудиторія 79. З дисертаційною роботою можна ознайомитись у бібліотеці Тернопільського національного технічного університету імені Івана Пулюя за адресою: 46001, м. Тернопіль, вул. Руська, 56.<br>У дисертації на основі сукупності узагальнених результатів

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Transporting machines"

1

Belyakov, V. V., and A. P. Kuli︠a︡shov. Vezdekhodnye transportno-tekhnologicheskie mashiny: Osnovy teorii dvizhenii︠a︡. Talam, 2004.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Transporting machines"

1

Kellerer, Hans, Alan J. Soper, and Vitaly A. Strusevich. "Transporting Jobs through a Processing Center with Two Parallel Machines." In Combinatorial Optimization and Applications. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-17458-2_33.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hu, Dongni, Wenjun Li, Yada Yu, Junhao Li, and Hongyang Yan. "TGPFM: An Optimized Framework for Ordering and Transporting Raw Materials for Production." In Machine Learning for Cyber Security. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-20102-8_26.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Yushu, Du. "Study on the Optimization of Transporting Blended Crude Oil in Lanzhou-Chengdu Crude Oil Pipeline." In Mechanisms and Machine Science. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-82907-9_24.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Gámez-De-León, Adalberto, Javier Jiménez-Cabas, Luis Díaz-Charris, and Jorge Herrera Cuartas. "Application of Machine Learning Techniques for Leak Detection in a Horizontal Pipeline Transporting a Water-Glycerol Mixture." In Lecture Notes in Computer Science. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-88705-5_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Panda, Brajesh Kumar, Shubham Subrot Panigrahi, Gayatri Mishra, and Vivek Kumar. "Robotics for general material handling machines in food plants." In Transporting Operations of Food Materials Within Food Factories. Elsevier, 2023. http://dx.doi.org/10.1016/b978-0-12-818585-8.00005-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Struss Peter, Kather Axel, Schneider Dominik, and Voigt Tobias. "A Compositional Mathematical Model of Machines Transporting Rigid Objects." In Frontiers in Artificial Intelligence and Applications. IOS Press, 2008. https://doi.org/10.3233/978-1-58603-891-5-184.

Full text

Abstract:

We present models of various elements of a plant that involves the transportation of lumped material. An application context is provided by a project on diagnosing disturbances in food packaging plants and, more specifically, bottling plants. While there exist models of flow of homogeneous matters, such as liquid material in a hydraulic system, based on simultaneous equations of Kirchhoff/Ohm type, in our project we need to cope with non-negligible transportation time of objects and capture phenomena like the tailback of units (if transportation is blocked) or the propagation of gaps in the fl

APA, Harvard, Vancouver, ISO, and other styles

7

Moriarty, Philip. "Nanomachines." In Nanotechnology: A Very Short Introduction. Oxford University PressOxford, 2022. http://dx.doi.org/10.1093/actrade/9780198841104.003.0005.

Full text

Abstract:

Abstract This chapter describes how nature has harnessed nanotechnology from the start of life on Earth to perform a variety of essential functions. It analyses the sophistication, intricacy, and elegance of nature’s nanomachinery, which far outstrips anything that scientists are capable of creating. It also discusses how the natural world is awash with molecular machines that achieve unidirectional motion with no need for an external guiding intelligence. The chapter mentions the STM-powered nanocar, a biomolecular motor from the kinesin family that leaves its synthetic counterpart in the dus

APA, Harvard, Vancouver, ISO, and other styles

8

Wu, Yulian. "Transporting Jade." In Making the Palace Machine Work. Amsterdam University Press, 2021. http://dx.doi.org/10.5117/9789463720359_ch06.

Full text

Abstract:

This chapter examines jade shipments relating to the Gao-pu case to reconstruct the complex process of transporting from Xinjiang to Beijing in the late eighteenth century. The relay stations in Xinjiang and post stations in northern China served the palace as crucial links to this new territory. Focusing on the route within Xinjiang, this chapter argues that Xinjiang officials’ management of jade delivery was developed closely around local ecology: they worked with animal and human resources of the local communities which were familiar with the landscape and knowledgeable about various ecolog

APA, Harvard, Vancouver, ISO, and other styles

9

Wu, Yulian. "Transporting Jade." In Making the Palace Machine Work. Amsterdam University Press, 2021. http://dx.doi.org/10.2307/j.ctv1tfw0z6.17.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wu, Yulian. "6 Transporting Jade." In Making the Palace Machine Work. Amsterdam University Press, 2021. http://dx.doi.org/10.1515/9789048553228-013.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Transporting machines"

1

Qu, Zhihao, Xiaoqi Yue, Yi Li, et al. "Corrosion Risk Prediction Based on Offshore Pipeline Service Database and Machine Learning Algorithms." In CONFERENCE 2022. AMPP, 2022. https://doi.org/10.5006/c2022-17711.

Full text

Abstract:

Abstract Pipelines are an important part of offshore oil and gas field development facilities and the main means of gathering and transporting offshore oil and gas resources. However, pipelines are subject to deterioration and degradation in the corrosion media. Corrosion risk assessment and prediction is an effective way to avoid leakage of oil and gas field pipelines and facilities, ensure safe operation and save cost. Hence, in this study, a machine learning model with excellent predictive performance was constructed for corrosion rate, to provide an effective mean for processing complex co

APA, Harvard, Vancouver, ISO, and other styles

2

Postolova, D. S., and V. N. Kurochkin. "TECHNOLOGICAL SYSTEM OF COMBINE HARVESTING AND TRANSPORTATION OF GRAIN CROPS: STABILITY OF FUNCTIONING IN CONDITIONS OF STOCHASTICITY." In STATE AND DEVELOPMENT PROSPECTS OF AGRIBUSINESS. ООО «ДГТУ-Принт» Адрес полиграфического предприятия: 344003, г. Ростов-на-Дону, пл. Гагарина,1., 2024. http://dx.doi.org/10.23947/interagro.2024.63-68.

Full text

Abstract:

The article presents the results of theoretical studies of the stability of functioning in conditions of stochasticity of technological systems for combine harvesting and transportation of grain crops. The relevance of this issue is determined by the insufficient parametric reliability of technological systems for harvesting and transporting grain crops. The adequacy of the applied technologies for harvesting and transporting grain from the field is determined by the methods of managing the consistency of the phases of this process. Digital control methods are used at the level of system eleme

APA, Harvard, Vancouver, ISO, and other styles

3

Orlovsky, S. N., S. A. Voynash, V. A. Sokolova, Yu I. Belenky, and A. S. Krivonogova. "Study of operating modes of crane-drilling machines in thawed soils." In II All-Russian (national) scientific conference with international participation "Russian Science, Innovation, Education". Krasnoyarsk Science and Technology City Hall, 2023. http://dx.doi.org/10.47813/rosnio-ii.2023.8.127-133.

Full text

Abstract:

The article deals with the problem of using crane-boring machines in the construction of communication lines and power transmission lines, the installation of fence posts and road signs, as well as in the construction of reclamation facilities. The data of experimental studies of these machines in the field to determine the rational modes of their operation in thawed soils are given. As a result of the research, it was found that the analysis of previous studies of the drilling modes of thawed soils does not give a clear idea of the existence and location on the response surface of the area of

APA, Harvard, Vancouver, ISO, and other styles

4

Döring, J. E., F. Hoebener, and G. Langer. "Review of Applications of Thermal Spraying in the Printing Industry in Respect to OEMs." In ITSC2008, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. http://dx.doi.org/10.31399/asm.cp.itsc2008p0200.

Full text

Abstract:

Abstract Printing machines mirror the art of precise manufacturing and adjusting of fast moving and heavy components with an accuracy of few micrometers. In order to meet the challenge of fast and high quality printing combined with a long lifetime of the machines, the core components transporting the print substrate and the different kinds of ink and other liquids needs to be coated, what is done more and more by applying thermal spray processes. The main requirements cover wear and corrosion resistance as well as suitable wetting and special needs like the ability of laser engraving. Moreove

APA, Harvard, Vancouver, ISO, and other styles

5

Habbab, Abdulkarim, Anas Fattouh, Bobbie Frank, Koteshwar Chirumalla, and Markus Bohlin. "Mapping Simulation optimization requirements for construction sites: A study in heavy-duty vehicles industry." In 64th International Conference of Scandinavian Simulation Society, SIMS 2023 Västerås, Sweden, September 25-28, 2023. Linköping University Electronic Press, 2023. http://dx.doi.org/10.3384/ecp200047.

Full text

Abstract:

The Construction and mining Industry comprises complex operations and interactions between various actors at different levels. Simulation has emerged as a valuable tool in this domain to better understand the site's behavior and optimize its operation. However, developing a simulation platform that can handle all the operations on the site is challenging due to the computational cost of the digital representation of reality along with the required accuracy level.This paper aims at extracting and mapping the optimization requirements of construction sites at three main levels: site level, opera

APA, Harvard, Vancouver, ISO, and other styles

6

Šopić, Martina, Antonio Bogdan, and Ivan Marović. "Efficiency Versus Efectiveness in Earthworks Based on Time Study Analysis." In 6th IPMA SENET Project Management Conference “Digital Transformation and Sustainable Development in Project Management”. International Project Management Association, IPMA Publications, and Faculty of Civil Engineering, University of Zagreb, Croatia, 2023. http://dx.doi.org/10.5592/co/senet.2022.22.

Full text

Abstract:

Construction generally takes place in very variable and dynamic conditions due to the presence of machinery, transport of materials, movement of workers, and the progress of construction. In order to solve the problem of site variable and dynamic conditions, two major research topics may stand out, more precisely, off-site performance planning and on-site performance tracking and monitoring. Earthworks commonly involve extensive utilization of various construction machines, mainly excavators and tipper (or dump) trucks. Tracking and monitoring of earthworks, based on collected quality data fro

APA, Harvard, Vancouver, ISO, and other styles

7

Šopić, Martina, Antonio Bogdan, and Ivan Marović. "Efficiency Versus Efectiveness in Earthworks Based on Time Study Analysis." In 6th IPMA SENET Project Management Conference “Digital Transformation and Sustainable Development in Project Management”. International Project Management Association, IPMA Publications, and Faculty of Civil Engineering, University of Zagreb, Croatia, 2023. http://dx.doi.org/10.5592/ce/senet.2022.22.

Full text

Abstract:

Construction generally takes place in very variable and dynamic conditions due to the presence of machinery, transport of materials, movement of workers, and the progress of construction. In order to solve the problem of site variable and dynamic conditions, two major research topics may stand out, more precisely, off-site performance planning and on-site performance tracking and monitoring. Earthworks commonly involve extensive utilization of various construction machines, mainly excavators and tipper (or dump) trucks. Tracking and monitoring of earthworks, based on collected quality data fro

APA, Harvard, Vancouver, ISO, and other styles

8

Fritsche, Manuel, Philipp Epple, Stefan Gast, and Antonio Delgado. "Numerical Investigation of the Euler Turbomachinery Equation and Analysis of the Impact of the Impeller Design on the Fan Performance by an Optimization Study." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-11572.

Full text

Abstract:

Abstract The working machines such as fans, blowers and pumps are often used for transporting fluids in technical systems. The rotating impeller is used for energy conversion of mechanical work into hydraulic work. Leonhard Euler published this relation of energy conversion in 1752–1756 and is still used today for the basic design of turbomachinery. In the present work, the Euler-Equation is described and presented in detail. Furthermore, a simplified parameterized blade channel of a centrifugal impeller is investigated with numerical simulation methods. The theoretical Euler-Equation is compa

APA, Harvard, Vancouver, ISO, and other styles

9

Barhorst, A. A., O. P. Harrison, and G. D. Bachand. "Modeling Elasto-Mechanical Phenomena Involved in the Motor-Driven Assembly of Nanomaterials." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-34175.

Full text

Abstract:

As the ability to manipulate materials and components at the nanoscale continues to grow, it will become increasingly critical to understand the dynamic interactions that occur among multiple components. For example, the dynamic interactions among proteins (i.e., nanoscale molecular machines) lead to complex, emergent behaviors such as photosynthesis, self-repair, and cell division. Recently, the research group at Sandia National Labs and The Center for Integrated Nanotechnologies (CINT), headed by George Bachand, has developed a molecular transport system capable of transporting and manipulat

APA, Harvard, Vancouver, ISO, and other styles

10

Annem, Vivek, Pradeep Rajendran, Shantanu Thakar, and Satyandra K. Gupta. "Towards Remote Teleoperation of a Semi-Autonomous Mobile Manipulator System in Machine Tending Tasks." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-3027.

Full text

Abstract:

Abstract Increasing the level of automation in material handling tasks in small volume production operations can improve human productivity and overall manufacturing system performance. In this paper, we present a teleoperated mobile manipulator system that can be used for tending machines and transporting parts in manufacturing applications. The remotely located human operator can interact with the semi-autonomous mobile manipulator by giving it high level instructions. We have incorporated several sensors on the system to ensure safe teleoperation where the operator gives only high level mot

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!