Log in

Relevant bibliographies by topics / Trepca / Journal articles

To see the other types of publications on this topic, follow the link: Trepca.

Journal articles on the topic 'Trepca'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Trepca.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Milikić, Ratomir. "Dve britanske misije u rudniku Trepča: prilozi za razumevanje politike Velike Britanije prema Jugoslaviji 1944–1945. godine." Tokovi istorije 31, no. 2 (2023): 217–42. http://dx.doi.org/10.31212/tokovi.2023.2.mil.217-242.

Full text

Abstract:

The paper explores two British missions in Serbia between December 1944 and June 1945, unknown until now. The purpose of both missions was to protect British interests by surveying the state of the Trepča mining complex in Kosovo and Metohija once the war operations were over. A majority stake in the Trepča lead-zinc mines was held by the British company Trepca Mines Limited owned by a mining magnate, Sir Alfred Chester Beatty. The two missions unveiled not only the importance of Trepča for the war effort of the Allies (as the need for lead ore had increased), but also the manner in which the

APA, Harvard, Vancouver, ISO, and other styles

2

Pavlovic, Sanja. "Tourism in development role of Gornja Trepca spa." Glasnik Srpskog geografskog drustva 88, no. 4 (2008): 99–108. http://dx.doi.org/10.2298/gsgd0804099p.

Full text

Abstract:

In this paper are allocated phases in tourism development in Gornja Trepca spa, signified on present and prospective kinds of tourism. Tourist traffic is analyzed from statistical references in the seventh decade of the last century to 2006. It has done comparation the number of tourists and nights in Gornja Trepca spa with spa spaces in Serbia. Accommodation facilities are showed in dependence to number of beds and contents they offer. It's analyzed preferences and demerits for tourism development in this spa settlement. It's concluded that exist good base, but it's required investments and b

APA, Harvard, Vancouver, ISO, and other styles

3

Galjak, Milivoje, Ljiljana Kulic, Dragica Bukumiric, and Ivan Bogosavljevic. "Analysis of health condition of workers RHMK Trepca - Zvecan." Praxis medica 45, no. 3-4 (2016): 51–55. http://dx.doi.org/10.5937/pramed1604051g.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Savic, Ljubinko, and Radisa Jankovic. "Mining of safety plates in the mine 'Trepca' - Stari trg." Rudarski radovi, Bor, no. 1 (2012): 105–16. http://dx.doi.org/10.5937/rudrad1201105s.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Elezaj, I., and D. A. Rozhaja. "Erythrocyte D -Aminolevulinic Acid Dehydratase (Ala-D) Activity and Blood Lead Level (Pb-B) of Tortoise (Testudo Hemanni, Gmel.) of Vicinity of Lead and Zinc Smelter “Trepca” in Kosova." Bosnian Journal of Basic Medical Sciences 1, no. 1 (1998): 24–25. http://dx.doi.org/10.17305/bjbms.1998.3609.

Full text

Abstract:

In comparison with control animals, a significant negative correlation (r = 0.77 -), between lead level and the activity of daminolevulinic acid dehydratase activity in the blood of land turtle (Testudo hermanni, Gmel.) caught in five different localities from heavy polluted environment of lead and zinc smelter “Trepca” was found. The concentration ratio of lead level in blood between control animals and those from the vicinity of smelter was 10:160 % and ratio of ALA-D activity was 10:18,3 U/LE.

APA, Harvard, Vancouver, ISO, and other styles

6

Nikolic, Branislav, and Slobodan Trajkovic. "Ninety years of mining and metallurgy in Trepca-sever conglomerate (part I)." Podzemni radovi, no. 30 (2017): 9–18. http://dx.doi.org/10.5937/podrad1730009n.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Nikolic, Branislav, Slobodan Trajkovic, Sanja Bajic, and Vesna Vujacic. "Ninety years of mining and metallurgy in Trepca: Sever conglomerate: Part II." Podzemni radovi, no. 31 (2017): 45–66. http://dx.doi.org/10.5937/podrad1731045n.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Minic, Dusko, Desimir Petkovic, N. Strbac, Ivan Mihajlovic, and Zivan Zivkovic. "Kinetic investigations of oxidative roasting and afterwards leaching of copper-lead matte." Journal of Mining and Metallurgy, Section B: Metallurgy 40, no. 1 (2004): 57–73. http://dx.doi.org/10.2298/jmmb0401057m.

Full text

Abstract:

In this paper, results of copper - lead matte investigations are presented. Investigated copper-lead matte is intermediate product of lead production in TREPCA-Zvecan. In the first part of the paper characterization of starting material is presented, consisting of: chemical composition analysis (XRQ), sceaning electron microscopy (SEM) and diffractometry (XRD). Thermal properties of matte investigated were determined using differential thermal analysis (DTA) at characteristic temperatures. Using results of induced analysis, mechanism of matte oxidation process was determined. In second part of

APA, Harvard, Vancouver, ISO, and other styles

9

Radovanović, Vladimir, and Ljiljana Savić. "With the knowledge to the world of ecological development: Case of the 'Trepca' company, Kosovska Mitrovica." Mining and Metallurgy Engineering Bor, no. 3-4 (2017): 111–22. http://dx.doi.org/10.5937/mmeb1704111r.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ibishi, Ismet, and Gzim Ibishi. "Determination of Stresses and Deformation During Measurements with Loading Method on Central Ore Pillars in TREPCA Mine." Journal of Engineering and Applied Sciences 5, no. 3 (2010): 226–28. http://dx.doi.org/10.3923/jeasci.2010.226.228.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Gardasevic, Jovan, Dusko Bjelica, Ivan Vasiljevic, Sami Sermaxhaj, and Fitim Arifi. "Differences in the Morphological Characteristics and Body Composition of Football Players FC Trepca ´89 and FC Prishtina in Kosovo." Journal of Anthropology of Sport and Physical Education 2, no. 3 (2018): 105–9. http://dx.doi.org/10.26773/jaspe.180718.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Tsirambides, A., and A. Filippidis. "GOLD METALLOGENY OF THE SERBOMACEDONIANRHODOPE METALLOGENIC BELT (SRMB)." Bulletin of the Geological Society of Greece 50, no. 4 (2017): 2037. http://dx.doi.org/10.12681/bgsg.11950.

Full text

Abstract:

The Alpine-Balkan-Carpathian-Dinaride (ABCD) metallogenic belt, which tectonically evolved during Late Cretaceous to the present, is Europe’s premier metallogenic province, especially for gold. Three spatially distinct tectonic and metallogenic belts are associated with this belt. One of them is the SerbomacedonianRhodope Metallogenic Belt (SRMB) which intersects with a NNW-SSE trend the south eastern Balkan countries. This belt includes the geotectonic zones of Vardar (Axios), Circum-Rhodope, and the Serbomacedonian and Rhodope Massives. It comprises dominantly carbonate replacement or porphy

APA, Harvard, Vancouver, ISO, and other styles

13

Mihajlovic, Slavica, Ljubinko Savic, Dragana Radosavljevic, Ljiljana Savic, Miroslav Ignjatovic, and Marina Blagojev. "The non-linear regression - the Levenberg-Marquardt algorithm for assumption the energy losses of hydraulic transport in a case of the mine "Trepca"." Thermal Science 23, no. 5 Part B (2019): 2929–38. http://dx.doi.org/10.2298/tsci180608252m.

Full text

Abstract:

The main problem of hydraulic transport is the resistance generated during the mixture transport through the pipe-line. Testing the flow characteristics of mixtures, shown in this paper, are based on the principles of determining the unit energy losses by a mathematical calculation using the non-linear regression ? the Levenberg-Marquardt algorithm. Such obtained results allow determining a transport rate in the horizontal pipe-line, depending on the mixture bulk density and pipe-line diameter. The flotation tailings is mainly used as a filling material in the mine ?Trepca? - Stari Trg. Accord

APA, Harvard, Vancouver, ISO, and other styles

14

Babincev, Ljiljana, Ljubinka Rajakovic, Milana Budimir, Aleksandra Peric-Grujic, and Dragana Sejmanovic. "Woody plant willow in function of river water protection." Chemical Industry 65, no. 4 (2011): 397–401. http://dx.doi.org/10.2298/hemind110222025b.

Full text

Abstract:

Coastal area surrounding the river Ibar, in the area between cities of Kosovska Mitrovica and Leposavic in the north of Kosovo and Metohija, is occupied with seven industrial waste dumps. These dumps were all part of the exploitation and flotation refinement of raw mineral materials, metallurgic refinement of concentrates, chemical industry, industrial refinement and energetic facilities of Trepca industrial complex. The existing waste dumps, both active and inactive, are of heterogenic chemical composition. Its impact on the river water is shown by the content of heavy metals found in it. Rem

APA, Harvard, Vancouver, ISO, and other styles

15

Tomczak, Robert T. "Osoby z województwa kaliskiego opisane w Liber Generationis Plebanorum Waleriana Nekandy Trepki - część I (powiat pyzdrski i koniński)." Polonia Maior Orientalis 8 (December 30, 2021): 237–58. http://dx.doi.org/10.4467/27204006pmo.21.013.15464.

Full text

Abstract:

Walerian Nekanda Trepka (1584/1585-1640), szlachcic z Małopolski, zaślepiony nienawiścią do ludzi nie należących do jego stanu postawił sobie za cel opisanie wszystkich znanych mu przypadków podszywania się pod szlachtę z całej Polski. Swoje poszukiwania opisał w formie obszernej księgi, w której znajdują się także osoby pochodzące z dawnego województwa kaliskiego. Celem artykułu jest opisanie oraz próba weryfikacji ustaleń Trepki dla łącznie jedenastu osób pochodzących z powiatów konińskiego i pyzdrskiego. Spośród opisanych osób w czterech przypadkach Trepka wysuwał niesłuszne oskarżenia (Chu

APA, Harvard, Vancouver, ISO, and other styles

16

Ammarullah, Muhammad Imam, Ilham Yustar Afif, Mohamad Izzur Maula, et al. "Tresca Stress Simulation of Metal-on-Metal Total Hip Arthroplasty during Normal Walking Activity." Materials 14, no. 24 (2021): 7554. http://dx.doi.org/10.3390/ma14247554.

Full text

Abstract:

The selection of biomaterials for bearing in total hip arthroplasty is very important to avoid various risks of primary postoperative failure for patients. The current investigation attempts to analyze the Tresca stress of metal-on-metal bearings with three different materials, namely, cobalt chromium molybdenum (CoCrMo), stainless steel 316L (SS 316L), and titanium alloy (Ti6Al4V). We used computational simulations using a 2D axisymmetric finite element model to predict Tresca stresses under physiological conditions of the human hip joint during normal walking. The simulation results show tha

APA, Harvard, Vancouver, ISO, and other styles

17

Zhao, De Wen, Can Ming Li, Liang Yun Lan, and Shun Hu Zhang. "Application of GM Yield Criterion in Plastic Zone of ModeⅠCrack and Burst Pressure for Pipeline." Advanced Materials Research 399-401 (November 2011): 2189–94. http://dx.doi.org/10.4028/www.scientific.net/amr.399-401.2189.

Full text

Abstract:

Based on GM yield criterion, the analytical solutions for shape and size of mode I crack tip plastic zone and the burst pressure for X70 pipeline steel are derived. Comparing the solutions with those based on Mises and Trasca criteria shows that under plain strain condition the area of plastic zone on GM is between Tresca and Mises solutions, and very close to Mises one. Among the areas Tresca’s is the largest and Mises is the smallest and all three zones are dumbbell shaped. However, for pipeline burst pressure based on Tresca criterion is the smallest and that on Twin shear stress criterion

APA, Harvard, Vancouver, ISO, and other styles

18

Trajković, Slobodan, Branislav Nikolić, Željko Kamberović, and Sanja Bajić. "Development of the lead and zinc mining and metallurgy in the "Trepča" mine-Stari Trg." Bakar 47, no. 2 (2022): 11–30. http://dx.doi.org/10.5937/bakar2202011t.

Full text

Abstract:

After the migration of Serbs in 1690 and 1735, the exploitation of mines in the area of present-day Serbia ceased, and after a standstill of nearly 200 years, the mining and metallurgical activities in Serbia were activated in the second quarter of the 20th century. The first concessions were bought by England in 1926, then the mines in Stari Trg (1927), Kišnica (1927), Ajvalija (1930), Novo Brdo (1933) were activated, and the Flotation (1930) and Smelter with Lead Refinery began to operate (1939) in Zvečan. In Kosovska Mitrovica, the chemical industry began operating in 1961, the Zinc Metallu

APA, Harvard, Vancouver, ISO, and other styles

19

Moga, Radu Andrei, Cristian Doru Olteanu, Botez Mircea Daniel, and Stefan Marius Buru. "Finite Elements Analysis of Tooth—A Comparative Analysis of Multiple Failure Criteria." International Journal of Environmental Research and Public Health 20, no. 5 (2023): 4133. http://dx.doi.org/10.3390/ijerph20054133.

Full text

Abstract:

Herein Finite elements analysis (FEA) study assesses the adequacy and accuracy of five failure criteria (Von Mises (VM), Tresca, maximum principal (S1), minimum principal (S3), and Hydrostatic pressure) for the study of tooth as a structure (made of enamel, dentin, and cement), along with its stress absorption–dissipation ability. Eighty-one 3D models of the second lower premolar (with intact and 1–8 mm reduced periodontium) were subjected to five orthodontic forces (intrusion, extrusion, tipping, rotation, and translation) of 0.5 N (approx. 50 gf) (in a total of 405 FEA simulations). Only the

APA, Harvard, Vancouver, ISO, and other styles

20

Uwamahoro, Claudine, and Jean de Dieu Dushimimana. "Project Manager's Soft Skills and Project Performance: A Case of Transforming Eastern Province Through Adaptation Project in Bugesera District, Rwanda." African Journal of Empirical Research 5, no. 4 (2024): 1970–86. https://doi.org/10.51867/ajernet.5.4.165.

Full text

Abstract:

The purpose of this study was to investigate the effect of project manager’s soft skills on performance of Transforming Eastern Province Through Adaptation (TREPA) Project in Bugesera District, in Rwanda. The specific objectives of this study was to assess the effect of project manager’s conflict resolution skills on performance of TREPA Project in Bugesera District; To find out the effect of project manager’s motivation skills on performance of TREPA Project in Bugesera District; To determine the effect of project manager’s leadership skills on performance of TREPA Project in Bugesera Distric

APA, Harvard, Vancouver, ISO, and other styles

21

Dilmi, M., H. Benseridi, and A. Saadallah. "Asymptotic Analysis of a Bingham Fluid in a Thin Domain with Fourier and Tresca Boundary Conditions." Advances in Applied Mathematics and Mechanics 6, no. 06 (2014): 797–810. http://dx.doi.org/10.4208/aamm.2013.m350.

Full text

Abstract:

AbstractIn this paper we prove first the existence and uniqueness results for the weak solution, to the stationary equations for Bingham fluid in a three dimensional bounded domain with Fourier and Tresca boundary condition; then we study the asymptotic analysis when one dimension of the fluid domain tend to zero. The strong convergence of the velocity is proved, a specific Reynolds limit equation and the limit of Tresca free boundary conditions are obtained.

APA, Harvard, Vancouver, ISO, and other styles

22

Zhang, Shun Hu, De Wen Zhao, and Cai Ru Gao. "Limit Analysis of Defect-Free Pipe Elbow under Internal Pressure with MY Criterion." Applied Mechanics and Materials 127 (October 2011): 79–84. http://dx.doi.org/10.4028/www.scientific.net/amm.127.79.

Full text

Abstract:

With MY (mean yield) criterion, the limit load of defect-free pipe elbow under inner pressure is analyzed, and an analytical solution is first obtained. The solution shows that the limit load is a function of wall thicknesst, average radiusr, yield strength as well as curvature radiusR0. The limit load increases with the increase of the curvature radiusR0and will get the same value with the burst pressure of straight pipe ifR0→∞. The limit load calculated by the solution is compared with those based on Tresca, Mises, as well as TSS yield criteria. It is also concluded that Tresca criterion pre

APA, Harvard, Vancouver, ISO, and other styles

23

Antão, Armando N., Nuno M. da Costa Guerra, Manuel Matos Fernandes, and António S. Cardoso. "Influence of tension cut-off on the stability of anchored concrete soldier-pile walls in clay." Canadian Geotechnical Journal 45, no. 7 (2008): 1036–44. http://dx.doi.org/10.1139/t08-039.

Full text

Abstract:

A previous paper studied the stability of soldier-pile walls in clay under vertical loading using upper bound analyses. A classical Tresca yield criterion was assumed in that analysis. This paper extends that study by considering a tension truncated Tresca yield criterion in an upper bound numerical analysis of the problem. It shows that assuming zero tension soil strength has a significant influence on the values of the minimum soldier-pile resistance required to ensure stability.

APA, Harvard, Vancouver, ISO, and other styles

24

Zhang, Da-Wei, Fang-Fang Xu, Zai-Chi Yu, Kun-Yin Lu, Ze-Bang Zheng, and Sheng-Dun Zhao. "Coulomb, Tresca and Coulomb-Tresca friction models used in analytical analysis for rolling process of external spline." Journal of Materials Processing Technology 292 (June 2021): 117059. http://dx.doi.org/10.1016/j.jmatprotec.2021.117059.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

CHAMOLI, NEERAJ, MINTO RATTAN, and SATYA BIR SINGH. "STUDY OF STRESS AND STRAIN RATES IN A ROTATING CYLINDER SUBJECTED TO INTERNAL AND EXTERNAL PRESSURE." International Journal of Computational Materials Science and Engineering 01, no. 02 (2012): 1250022. http://dx.doi.org/10.1142/s2047684112500224.

Full text

Abstract:

The creep behavior of a thick walled hollow circular cylinder, made of aluminum silicon carbide particulate composite material has been investigated in the present study and creep behavior in this case is assumed to follow Sherby's constitutive model. The stress and strain rate distributions of cylinder rotating about its own axis, have been obtained using von Mises and Tresca yield criteria. The effect of pressure on the stresses and strain rates in the cylinder has been investigated and it is observed that with the increase of the internal pressure in the cylinder the strain rate increases.

APA, Harvard, Vancouver, ISO, and other styles

26

Wakamatsu, Manabu, Hideki Muramatsu, Shinsuke Kataoka, et al. "Utility of Newborn Screening for Severe Combined Immunodeficiency and X-Linked Agammaglobulinemia Using TREC and KREC Assays." Blood 134, Supplement_1 (2019): 3604. http://dx.doi.org/10.1182/blood-2019-126669.

Full text

Abstract:

Background Severe combined immune deficiency (SCID) is a potentially fatal primary immunodeficiency due to the absence of T and B lymphocyte function. Early intervention for patients with SCID results in a higher survival rate. From 2017, we launched the first optional newborn screening (NBS) for SCID in Japan based on the detection of T-cell receptor excision circles (TREC). However, NBS for severe B-cell lymphopenia, such as X-linked agammaglobulinemia (XLA), has not been a standard screening test because of a high false-positive rate of Kappa-deleting recombination excision circles (KREC),

APA, Harvard, Vancouver, ISO, and other styles

27

Taiebat, H. A., and J. P. Carter. "Flow rule effects in the Tresca model." Computers and Geotechnics 35, no. 3 (2008): 500–503. http://dx.doi.org/10.1016/j.compgeo.2007.06.012.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

Pascual Gutiérrez, Ana. "Simone Trecca, Filmicidad/literariedad/teatralidad: la diseminación intermedial de tres clásicos españoles." Trasvases entre la Literatura y el Cine, no. 3 (September 29, 2021): 339–41. http://dx.doi.org/10.24310/trasvasestlc.vi3.13596.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Yao, J. Q., T. V. Parry, A. Unsworth, and J. L. Cunningham. "Contact Mechanics of Soft Layer Artificial Hip Joints: Part 2: Application to Joint Design." Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 208, no. 4 (1994): 206–15. http://dx.doi.org/10.1243/pime_proc_1994_208_290_02.

Full text

Abstract:

In this paper, the general solutions previously obtained for the contact mechanics of a soft layer artificial hip joint have been applied to the design of such joints. In particular, simple power-law design formulae have been generated for the prediction of the contact radius and the maximum Tresca shear stress within the elastomeric layer, when the aspect ratio varied from 1 to 20 (which covered the entire range of the aspect ratio for soft layer artificial hip joints). The effects of the layer thickness, Young's modulus of the layer and the equivalent radius of the joint upon the contact are

APA, Harvard, Vancouver, ISO, and other styles

30

Moga, Radu-Andrei, Cristian Doru Olteanu, and Ada Gabriela Delean. "Periodontal Breakdown, Orthodontic Movements and Pulpal Ischemia Correlations—A Comparison Between Five Study Methods." Journal of Clinical Medicine 13, no. 23 (2024): 7062. http://dx.doi.org/10.3390/jcm13237062.

Full text

Abstract:

Background/Objectives: This study assessed the biomechanical behavior of dental pulp and the neuro-vascular bundle/NVB as well as the ischemic risks during orthodontic movements in a gradual horizontal periodontal breakdown, using five methods and aiming to identify the most accurate one. Methods: Seventy-two models of second lower premolar (from nine patients) were subjected to 3 N of intrusion, extrusion, rotation, tipping, and translation. Five numerical methods, Tresca, Von Mises/VM, Maximum and Minimum Principal, and hydrostatic pressure were used in a total of 1800 numerical simulations.

APA, Harvard, Vancouver, ISO, and other styles

31

Ljubisavljević, Tijana, and Zoran Radosavljević. "Ownership transformation of spa resorts in the Republic of Serbia: The model of the privatization of Gornja Trepča Ltd., Gornja Trepča." Menadzment u hotelijerstvu i turizmu 6, no. 2 (2018): 47–59. http://dx.doi.org/10.5937/menhottur1802055l.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

De la Torre Espinosa, Mario. "Simone Trecca, Filmicidad / Literariedad / Teatralidad: la diseminación intermedial de tres clásicos españoles. Madrid: Visor, 2019. ISBN: 978-84-9895-217-9. 178 pp." Talía. Revista de estudios teatrales 2 (July 8, 2020): 131–32. http://dx.doi.org/10.5209/tret.67239.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Moga, Radu Andrei, Ada Gabriela Delean, Stefan Marius Buru, Mircea Daniel Botez, and Cristian Doru Olteanu. "Orthodontic Internal Resorption Assessment in Periodontal Breakdown—A Finite Elements Analysis (Part II)." Healthcare 11, no. 19 (2023): 2622. http://dx.doi.org/10.3390/healthcare11192622.

Full text

Abstract:

This finite elements analysis (FEA) assessed the accuracy of maximum shear stress criteria (Tresca) in the study of orthodontic internal surface resorption and the absorption–dissipation ability of dental tissues. The present study was conducted over eighty-one models totaling 324 simulations with various bone loss levels (0–8 mm), where 0.6 N and 1.2 N were applied in the intrusion, extrusion, rotation, tipping, and translation movements. Tresca criteria displayed localized high-stress areas prone to resorption for all situations, better visible in the dentine component. The internal resorpti

APA, Harvard, Vancouver, ISO, and other styles

34

Bukhanko, A. A. "PLASTICITY CONDITION CONNECTED WITH LEVEL LINES OF STRAIN STATE SURFACE FOR DIFFERENT DEFORMATION PROCESSES." Vestnik of Samara University. Natural Science Series 19, no. 9.2 (2017): 43–54. http://dx.doi.org/10.18287/2541-7525-2013-19-9.2-43-54.

Full text

Abstract:

On the basis of the theory of plastic flow the peculiarities of application of plasticity condition connected with level lines of strain state surface for work-hardening incompressible rigid-plastic body at different stressed states realized in the context of plane and axisymmetric strain, plane stressed state are considered. Comparison of the proposed condition with plasticity conditions of Mises and Tresca is carried out on the basis of construction of yield curves in deviatoric plane and in planes corresponding to certain stressed states. It is shown that the proposed plasticity condition d

APA, Harvard, Vancouver, ISO, and other styles

35

Jing, P. H., and T. Khraishi. "Analytical Solutions for Crack Tip Plastic Zone Shape Using the Von Mises and Tresca Yield Criteria: Effects of Crack Mode and Stress Condition." Journal of Mechanics 20, no. 3 (2004): 199–210. http://dx.doi.org/10.1017/s1727719100003415.

Full text

Abstract:

AbstractAnalytical closed-form solutions for the crack tip plastic zone shape have been derived for a semi-infinite crack in an isotropic elastic-perfectly plastic solid under both plane stress and plane strain conditions. Two yield criteria have been applied: the Von Mises and Tresca yield criteria. The solutions have been developed for crack modes I and III (mode II has been published previously). The results, which favorably compare to a limited number of existing experimental and analytical findings, indicate that the Tresca zone is larger in size than the Von Mises zone. Moreover, an inte

APA, Harvard, Vancouver, ISO, and other styles

36

Moga, Radu Andrei, Stefan Marius Buru, and Cristian Doru Olteanu. "Assessment of the Best FEA Failure Criteria (Part II): Investigation of the Biomechanical Behavior of Dental Pulp and Apical-Neuro-Vascular Bundle in Intact and Reduced Periodontium." International Journal of Environmental Research and Public Health 19, no. 23 (2022): 15635. http://dx.doi.org/10.3390/ijerph192315635.

Full text

Abstract:

The aim of this study was to biomechanically assess the behavior of apical neuro-vascular bundles (NVB) and dental pulp employing Tresca, Von Mises, Pressure, S1 and S3 failure criterions in a gradual periodontal breakdown under orthodontic movements. Additionally, it was to assess the accuracy of failure criteria, correlation with the maximum hydrostatic pressure (MHP), and the amount of force safe for reduced periodontium. Based on cone-beam computed tomography, 81 3D models of the second lower premolar were subjected to 0.5 N of intrusion, extrusion, rotation, tipping, and translation. A Fi

APA, Harvard, Vancouver, ISO, and other styles

37

Krabbenhoft, K., and A. V. Lyamin. "Generalised Tresca criterion for undrained total stress analysis." Géotechnique Letters 5, no. 4 (2015): 313–17. http://dx.doi.org/10.1680/jgele.15.00120.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Shuttle, D. "Cylindrical cavity expansion and contraction in Tresca soil." Géotechnique 57, no. 3 (2007): 305–8. http://dx.doi.org/10.1680/geot.2007.57.3.305.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Ayadi, Mekki, Mohamed Khaled Gdoura, and Taoufik Sassi. "Mixed formulation for Stokes problem with Tresca friction." Comptes Rendus Mathematique 348, no. 19-20 (2010): 1069–72. http://dx.doi.org/10.1016/j.crma.2010.10.001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Weisz-Patrault, D., and A. Ehrlacher. "Imposed curvature of an elastic-plastic strip: application to simulation of coils." Mechanics & Industry 18, no. 2 (2017): 218. http://dx.doi.org/10.1051/meca/2016038.

Full text

Abstract:

This work is part of the framework of a fast modeling of winding aiming at improving knowledge of residual stress evolution in steel strips and therefore their flatness during the coiling process. An exact analytical solution of an elastic-plastic strip with isotropic hardening at finite strains under an imposed transformation of curvature is developed. Issues related to flow rules for non-differentiable yield functions (Tresca) have been broached and a unique solution is obtained. The equivalence for this transformation, between von Mises and Tresca yield functions is demonstrated. This solut

APA, Harvard, Vancouver, ISO, and other styles

41

Moga, Radu Andrei, Stefan Marius Buru, and Cristian Doru Olteanu. "Assessment of the Best FEA Failure Criteria (Part I): Investigation of the Biomechanical Behavior of PDL in Intact and Reduced Periodontium." International Journal of Environmental Research and Public Health 19, no. 19 (2022): 12424. http://dx.doi.org/10.3390/ijerph191912424.

Full text

Abstract:

The accuracy of five failure criterions employed in the study of periodontal ligaments (PDL) during periodontal breakdown under orthodontic movements was assessed. Based on cone-beam computed tomography (CBCT) examinations, nine 3D models of the second lower premolar with intact periodontium were created and individually subjected to various levels of horizontal bone loss. 0.5 N of intrusion, extrusion, rotation, tipping, and translation was applied. A finite Elements Analysis (FEA) was performed, and stresses were quantitatively and qualitatively analyzed. In intact periodontium, Tresca and V

APA, Harvard, Vancouver, ISO, and other styles

42

Nikolić, Branislav, Miroslav Sokić, and Željko Kamberović. "Fifty years of metallurgical production of zinc and cadmium in Serbia." Tehnika 76, no. 1 (2021): 32–38. http://dx.doi.org/10.5937/tehnika2101033n.

Full text

Abstract:

Serbia has plenty of rich sites and active excavation mines of polymetallic ores of lead and zinc and centuries-old practice of their exploitation. In Serbia, the metallurgical processing of zinc concentrate started in 1955 at Zorka company in Šabac, while in the town of Kosovska Mitrovica, it began in 1967 at the Trepča combine. Several factors, including the fall o Yugoslaviam general societal circumstances and ownership transition, lead to a significant decline in production since 1992. It developed to the final halt of zinc's metallurgical production in 1999 at Trepča and in 2002 at Zorka.

APA, Harvard, Vancouver, ISO, and other styles

43

Lan, Liang Yun, Can Ming Li, De Wen Zhao, Chun Lin Qiu, and Can Ming Li. "Derivation of Equal Area Criterion and its Application to Crack Tip Plastic Zone Analysis." Applied Mechanics and Materials 110-116 (October 2011): 2918–25. http://dx.doi.org/10.4028/www.scientific.net/amm.110-116.2918.

Full text

Abstract:

A new linear yield criterion, referred to as Equal Area (EA) yield criterion, was derived in Haigh Westergaard stress space based on the projection area of its yielding locus on the π-plane equal to the area of von Mises yielding circle. Under the plane stress and strain conditions the crack tip plastic zone dimensions were calculated based on EA yield criterion and compared with those calculated according to the Tresca and von Mises yield criteria. The results showed that the crack tip plastic zone based on EA yield criterion is similar to that based on von Mises yield criterion, but is much

APA, Harvard, Vancouver, ISO, and other styles

44

Guan, Miao, and Zhao Zhun Zhong. "Analysis of Plastic Zone at a Crack Tip for I, II and III Mode Fracture with MY Criterion." Advanced Materials Research 1078 (December 2014): 25–30. http://dx.doi.org/10.4028/www.scientific.net/amr.1078.25.

Full text

Abstract:

The plastic zones for I, II, III mode crack under small scale yielding are analyzed by MY criterion, and the analytical solutions of the sizes of the plastic zones for plain stress and plain strain states are first obtained. The solutions for I and II mode crack show that the two solutions are functions of the yield stress, stress strength factor and polar angle, while the solution for III mode crack just depends on the yield stress and stress strength factor. Comparison of the plastic zone with those based on Tresca and Mises criteria shows that Tresca criterion predicts the maximum, the resu

APA, Harvard, Vancouver, ISO, and other styles

45

Santos, Thomas Gomes dos, Diego Rafael Alba, André Rosiak, and Lirio Schaeffer. "Performance analysis of different friction models in the numerical simulation of the isothermal forging process." International Journal of Advanced Engineering Research and Science 9, no. 11 (2022): 358–65. http://dx.doi.org/10.22161/ijaers.911.43.

Full text

Abstract:

Finite element analysis is a powerful tool for the design and optimization of mechanical forming processes. To achieve accurate results, a precise knowledge of the fundamental process parameters is required. In this context, this work analyzes the influence of several friction models in the numerical simulation of isothermal forging processes for a commercial aluminum alloy. Using the commercial software FORGE NxT 2.0, the friction models of, Tresca, Coulomb-Tresca and the Viscoplastico(Norton) friction model were considered and their results compared to forging experiments of an axisymmetric

APA, Harvard, Vancouver, ISO, and other styles

46

Brooks, G. N. "Elastic-Plastic Analysis of Pressurized Cylindrical Shells." Journal of Applied Mechanics 54, no. 3 (1987): 597–603. http://dx.doi.org/10.1115/1.3173075.

Full text

Abstract:

Plasticity in shells is often contained near the ends of a segment where the bending stresses are significant. Outside of this local neighborhood the behavior is elastic. Thus, an axisymmetric shell can be divided along its axis into a purely elastic region away from an end and the local region where plasticity is present. The moment-curvature relation in the elastic-plastic region is calculated using the Tresca yield condition. Use of the Tresca yield condition greatly simplifies this derivation because the principal directions are known. This moment-curvature relationship is “exact” in the s

APA, Harvard, Vancouver, ISO, and other styles

47

Kołodziejczyk, Joanna, Jaroslav Pršek, Vasilios Melfos, Panagiotis Ch Voudouris, Feriz Maliqi, and Gabriela Kozub-Budzyń. "Bismuth minerals from the Stan Terg deposit (Trepça, Kosovo)." Neues Jahrbuch f??r Mineralogie - Abhandlungen: Journal of Mineralogy and Geoche 192, no. 3 (2015): 317–33. http://dx.doi.org/10.1127/njma/2015/0288.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Annin, B. D. "New exact solutions of the spatial Tresca plasticity equations." Doklady Physics 52, no. 8 (2007): 422–25. http://dx.doi.org/10.1134/s1028335807080058.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Ayadi, Mekki, Leonardo Baffico, Mohamed Khaled Gdoura, and Taoufik Sassi. "Error estimates for Stokes problem with Tresca friction conditions." ESAIM: Mathematical Modelling and Numerical Analysis 48, no. 5 (2014): 1413–29. http://dx.doi.org/10.1051/m2an/2014001.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Cazacu, Oana, Benoit Revil-Baudard, Nitin Chandola, and J. L. Alves. "New Analytical Criterion for Porous Solids with Tresca Matrix." Procedia Materials Science 3 (2014): 1412–17. http://dx.doi.org/10.1016/j.mspro.2014.06.228.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!