Relevant bibliographies by topics / Trinocular Microscope and ANSYS

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Trinocular Microscope and ANSYS'

Author: Grafiati
Published: 7 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Trinocular Microscope and ANSYS.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Trinocular Microscope and ANSYS"

1

BULLIBABU, KANCHARLA. "Production and characterization of Fired Clay Bricks with Admixture of Palmyra Fruit Fiber and Evaluated by Ansys." Production and characterization of Fired Clay Bricks with Admixture of Palmyra Fruit Fiber and Evaluated by Ansys 04, no. 10 (2017): 26–31. https://doi.org/10.5281/zenodo.14228778.

Full text
Abstract:
The effect of compositions ofPalmyra fruit fiber admixture on thermalstresses and other mechanical properties of Claywere investigated. The raw clay gotten fromSuryapet in Telangana state. First processed tovery fine particles of clay were also dried atatmosphere temperature to remove moisturepresent. A composite mixture of this driedPalmyra fruit fiber with the processed clay wasmade at various proportions of the Palmyra fruitfiber, with a little addition of water forplasticity. Samples of rectangular dimensionswere then produced from the mounting press bythe process of compaction with a very
APA, Harvard, Vancouver, ISO, and other styles
2

Khalifah, Tur Ridha Noer, Hasnah Natsir, Siti Fauziah, and Indah Raya. "Synthesis and Characterization of Hydrogels Derived from Cellulose of Water Hyacinth (<i>Eichornia crassipes</i>) and Chitosan Using the Freeze-Thaw Method." Materials Science Forum 1061 (May 26, 2022): 91–96. http://dx.doi.org/10.4028/p-w4p187.

Full text
Abstract:
This study aims to determine the absorption and ability of hydrogels to hold water. The hydrogel was synthesized using the freeze-thaw method, then the absorption ability and water retention time in the hydrogel were tested and characterized by FTIR and trinocular stereo microscope. The FTIR results showed that the resulting hydrogel had N–H, O–H, aliphatic C–H, bend N–H, C–O, and C–N functional groups. The highest absorption of the hydrogel with a ratio of cellulose:chitosan:EDTA variations of 2:2.25:0.25 (g) respectively, which was 287.46% and the appearance of the hydrogel under a microscop
APA, Harvard, Vancouver, ISO, and other styles
3

Vurchio, Federica, Pietro Ursi, Francesco Orsini, et al. "Toward Operations in a Surgical Scenario: Characterization of a Microgripper via Light Microscopy Approach." Applied Sciences 9, no. 9 (2019): 1901. http://dx.doi.org/10.3390/app9091901.

Full text
Abstract:
Micro Electro Mechanical Systems (MEMS)-Technology based micro mechanisms usually operate within a protected or encapsulated space and, before that, they are fabricated and analyzed within one Scanning Electron Microscope (SEM) vacuum specimen chamber. However, a surgical scenario is much more aggressive and requires several higher abilities in the microsystem, such as the capability of operating within a liquid or wet environment, accuracy, reliability and sophisticated packaging. Unfortunately, testing and characterizing MEMS experimentally without fundamental support of a SEM is rather chal
APA, Harvard, Vancouver, ISO, and other styles
4

TYAGI, KAOMUD, DEVKANT SINGHA, RAJASREE CHAKRABORTY, AVAS PAKRASHI, and VIKAS KUMAR. "A new species of Apelaunothrips (Thysanoptera: Phlaeothripidae) from India with new synonym of Podothrips sasacola Kurosawa." Zootaxa 4751, no. 1 (2020): 196–200. http://dx.doi.org/10.11646/zootaxa.4751.1.14.

Full text
Abstract:
The first objective of this paper is to describe a new fungus-feeding species in the Phlaeothripinae genus Apelaunothrips, and to provide a key to the six species of this genus recorded from India. The second objective is to establish a new synonym in the Poaceae-associated genus, Podothrips, based on structural variation observed among recently collected samples from bamboo. The slide-mounted specimens were studied with a Leica Trinocular Microscope (Leica DM-1000) and a Leica software application suite (LAS EZ 2.1.0) was used to make line drawing and photographs.
APA, Harvard, Vancouver, ISO, and other styles
5

Li, Xiyao, Jingwen Chen, Yong He, et al. "High-through counting of Chinese cabbage trichomes based on deep learning and trinocular stereo microscope." Computers and Electronics in Agriculture 212 (September 2023): 108134. http://dx.doi.org/10.1016/j.compag.2023.108134.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

McCuskey, R. S. "High-resolution light microscopy of living organs in situ." Proceedings, annual meeting, Electron Microscopy Society of America 53 (August 13, 1995): 790–91. http://dx.doi.org/10.1017/s0424820100140324.

Full text
Abstract:
Most organs in anesthetized small laboratory animals can be studied in vivo by light microscopy of relatively thin (3-5mm), transilluminated areas of the organ. Thicker areas of the organs in these species, as well as thicker organs of larger animals can be examined only by epi-ilumination. However, the resolution obtainable with epi-ilumination usually is inferior to that realized with transillumination. This paper reviews these methods using the liver as an example of the organ of study. A standard compound trinocular microscope is used which is modified for in vivo microscopy and is equippe
APA, Harvard, Vancouver, ISO, and other styles
7

Alfianny, Rika, Ardhiani Kurnia Hidayanti, and Tati Suryati Syamsudin. "Preservation technique to identify Bactrocera dorsalis complex (Diptera: Tephritidae) based on image analysis." Jurnal Entomologi Indonesia 19, no. 2 (2022): 174–79. http://dx.doi.org/10.5994/jei.19.2.174.

Full text
Abstract:
Fruit flies (Bactrocera dorsalis (Hendel)) are insect pests of many fruits and vegetables. Yield losses due to this pest can reach 100%, and many may be unaware that fruit flies are the trigger for several disease attacks on crops such as fungi and bacteria. This study aimed to identify the most appropriate preservation technique for morphological identification of B. dorsalis by image analysis. Images were taken with the Nikon DSF12 Trinocular Microscope. The methods used varied by trapping period (short-term and long-term) and types of preservatives (ethanol and propylene glycol). Specimens
APA, Harvard, Vancouver, ISO, and other styles
8

Elsy, Bijo, and Aijaz Ahmed Khan. "Histopathological Study of Experimentally Crushed Skeletal Muscle’s Regeneration in Adult Albino Rats." Asian Pacific Journal of Health Sciences 9, no. 1 (2022): 185–89. http://dx.doi.org/10.21276/apjhs.2022.9.1.44.

Full text
Abstract:
Aim: This study aims to explain all the events of skeletal muscle repair and regeneration with the help of suitable histophathlogical photomicrographs taken from crush-injured adult albino rat’s gluteus maximus muscle. Materials and Methods: The present study is part of our previous research study related to skeletal muscle repair and regeneration in crush injured gluteus maximus muscle of adult albino rats. The samples were processed for histopathological examination using routine and special histological staining procedures. The tissue samples were examined under trinocular microscope, and t
APA, Harvard, Vancouver, ISO, and other styles
9

TYAGI, KAOMUD, RAJASREE CHAKRABORTY, DEVKANT SINGHA, and VIKAS KUMAR. "A new species of Trichromothrips (Thysanoptera) from India with four new records." Zootaxa 4363, no. 1 (2017): 145. http://dx.doi.org/10.11646/zootaxa.4363.1.8.

Full text
Abstract:
Globally 6100 species of the Order Thysanoptera are reported, of which 739 are known from India (Tyagi &amp; Kumar 2016). The purpose here is to describe from India one new species and record for the first time from this country four other species, representing three different families, and full nomenclatural details are available at ThripsWiki (2017). From three of the species, including the holotype of the new species, DNA was isolated and amplification of partial fragment of mtCOI gene was performed (Tyagi et al. 2017) with the sequences submitted to the Barcode of Life Database. Photograph
APA, Harvard, Vancouver, ISO, and other styles
10

Murali, Manohar Yadav*1 Ankit Srivastava2 Kriti Nigam2 &. Vijay K. Yadav2. "COMPARATIVE ANALYSIS OF WILD ANIMAL HAIRS." GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES 5, no. 11 (2018): 239–45. https://doi.org/10.5281/zenodo.1544939.

Full text
Abstract:
The present study was conducted to find out the macroscopic and microscopic characteristics of hair of nine endangered wild animals with the objective of species identification. Hairs remain unchanged chemically and histologically till several years. In present study the shredded hair sample of Bear (<em>Melursus ursinus</em>), Hyena (<em>Crocuta crocuta</em>), Lioness (<em>Panthera leo</em>), Lion (<em>Panthera leo</em>), Zebra (<em>Equus quagga</em>), Panther (<em>Panthera pardus</em>), Blackbuck (<em>Antilope cervicapra</em>), Sambar deer (<em>Rusa unicolor</em>) and Fishing cat (<em>Priona
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Trinocular Microscope and ANSYS"

1

Šimík, Marcel. "Specifika nastavení řešiče v systému Ansys Fluent pro nízké tlaky v EREM." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-319633.

Full text
Abstract:
This thesis is focused on electron microscopy which issue is discussed at the beginning of work. The main attention is dedicated to the Environmental electron microscope, especially the differentially pumped chamber, which the thesis deals with. There is a production of an experimental chamber for analysis of shock waves on going therefore main goal of this thesis was to analyze the flow pattern in this chamber. Using the Ansys Fluent program, simulations of the characteristic flow that arises from the pumping of the vacuum chambers namely the ultrasonic flow at low pressures on which the most
APA, Harvard, Vancouver, ISO, and other styles
2

Rous, Miroslav. "Analýza vlivu umístění kónické clony v nadzvukovém proudu v komoře diferenciálního čerpání." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377065.

Full text
Abstract:
The thesis is focused on the medium dynamics simulation in the environmental scanning electron microscope. Specifically, it researches (examines) the conical aperture location effect in the differential pumped chamber and the width of the pumping channel in this chamber. The theoretical part deals with the environmental scanning microscope generally and other tools used in this thesis, e.g. ANSYS Fluen software, fluid turbulence, medium free path of molecules and electrons scattering. In the practical part, the work is focused on data processing from the ANSYS Fluent program and on their evalu
APA, Harvard, Vancouver, ISO, and other styles
3

Bednář, Eduard. "Analýza vlivu proudění plynu v oblasti umístění vzorku v komoře enviromentálního rastrovacího elektronového mikroskopu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242067.

Full text
Abstract:
This thesis deals with the simulation of fluid dynamics in environmental scanning electron microscope and evaluate solvers setup, the degree of discretization, choice of turbulent model and proposal optimal design of environmental scanning electron microscope. The theoretical part describes the issue of environmental scanning electron microscopy, software SolidWorks and ANSYS Fluent, basic equations describing fluid status, fluid turbulence, the mean free path of molecules and electron scattering. The practical part of the thesis is to create the model of environmental scanning electron micros
APA, Harvard, Vancouver, ISO, and other styles
4

Vlachová, Hutová Eliška. "Studium vlivu magnetických polí na biologické tkáně." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219519.

Full text
Abstract:
The aim of this research is to explore the influence of magnetic field on early somatic embryos (ESEs) of spruce and pine. The magnetic field is gradual. This is important for the experiment, each cluster of ESE was exposed to magnetic field of different intensity. The resulting report of this experiment consists of the comparison between various methods of image analysis and the difference in growth of ESEs due to different exposure to magnetic field and surrounding temperature. Enclosed is a proposal of ESE size computing algorithm from a given image.
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Trinocular Microscope and ANSYS"

1

Wang, Xuewei, Qun Gao, and Fucheng You. "Uncalibrated Trinocular-Microscope Visual Servo Control Strategy." In Neural Information Processing. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-70090-8_55.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kumari, Nisha, and K. Kumar. "Fabrication of Orthotic Calipers With Epoxy-Based Green Composite." In Composites and Advanced Materials for Industrial Applications. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-5216-1.ch008.

Full text
Abstract:
The concern towards environmental issues and the need for more polymer-based composites has extended its collection towards polymer composites strengthened with natural fillers. The main aim of the chapter is to make the side metallic sticks (called braces, where aluminum alloys are being used) of orthotic calipers with epoxy-based composite reinforced with coir dust as filler. Its mechanical behavior together with density, tensile and three-point bending are observed and compared with the existing aluminum-based calipers components after validating the experimental as well as virtual results.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Trinocular Microscope and ANSYS"

1

Trigg, A. D., U. Sridhar, H. S. Lee, and G. Karunasiri. "Temperature Measurement on Micromachined IR Bolometers Using an Infrared Microscope." In ISTFA 1999. ASM International, 1999. http://dx.doi.org/10.31399/asm.cp.istfa1999p0189.

Full text
Abstract:
Abstract Thermal properties are critical to the performance of micromachined silicon bolometers. In order to verify thermal models of the device, a means of measuring the local temperature distribution over the element is required, as it is heated by passing current through a thin film titanium meander. Because of the very low thermal mass of the membrane a non-contact method of temperature measurement is needed. Most conventional thermal imaging systems operate in the wavelength range 5-15 μm and offer poor spatial resolution but in this work an infrared microscope, operating at shorter wavel
APA, Harvard, Vancouver, ISO, and other styles
2

Lin, Cheng-Hsuan, Cheng-Chi Yeh, Chen-Peng Hsu, and Wensyang Hsu. "Design and Fabrication of a Cascaded Electro-Thermal Bimorph Actuator." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-79854.

Full text
Abstract:
Here a cascaded bimorph actuator is proposed by integrating several novel actuation units to accumulate the vertical displacements. Each actuation unit comprises two types of bimorph beams and a constraint bar, and both beams will stretch outward with respect to the constraint bar while heating. In comparison with other three conventional bimorph actuator designs at the same device size, it is shown that the proposed design can provide larger vertical displacement. The proposed cascaded bimorph actuator is fabricated by surface micromachining technique and released by XeF2 silicon isotropic et
APA, Harvard, Vancouver, ISO, and other styles
3

Han, Z. H., H. J. Wang, and Y. B. Guo. "Thermal Shock Behavior of the Supersonic Plasma Sprayed CeO2-Y2O3-ZrO2 Functionally Graded TBC." In ITSC2007, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. ASM International, 2007. http://dx.doi.org/10.31399/asm.cp.itsc2007p0518.

Full text
Abstract:
Abstract A functionally graded thermal barrier coating (FG-TBC) of CeO2-Y2O3-ZrO2/NiCoCrAlY was prepared using a recently developed supersonic plasma spray (S-PS) system. The system had dual powder feed ports through which the metal alloy powders were fed into the lower temperature region of the plasma plume, to prevent over oxidation, and the ceramic powders were fed into the high temperature region, to produce complete melting. Such an approach enabled fine configurations having a continuously graded composition transition to be obtained. The thermal shock testing of the deposited samples wi
APA, Harvard, Vancouver, ISO, and other styles
4

Gandikota, Ibaad, Aniket Bharamgonda, Abhijit Dasgupta, and Patrick McCluskey. "Reliability Analysis of SAC Solder Under Thermal Fatigue for Encapsulated GaN Packages." In ASME 2024 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/ipack2024-141249.

Full text
Abstract:
Abstract A single-stage dual-active-bridge DC-AC microinverter prototype board with Gallium Nitride (GaN) primary switching devices was designed and assembled for environmental reliability testing. An unpowered temperature cycling test was conducted with an amplitude ranging from −40 to 105°C at a ramp rate of 5°C/min. The electrical testing revealed a failure in the board between 800 and 1000 hours, which was located at the primary devices. Non-destructive failure analysis was performed on the board to determine the failure modes and mechanisms. Using a Confocal Scanning Acoustic Microscope (
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Trinocular Microscope and ANSYS' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography