Log in

Relevant bibliographies by topics / Truck frames / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Truck frames.

Dissertations / Theses on the topic 'Truck frames'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 23 dissertations / theses for your research on the topic 'Truck frames.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Al-Hakeem, Ali Hashim. "Structural analysis of truck chassis frames under longitudinal loads considering bimoment effects." Thesis, Cranfield University, 1991. http://hdl.handle.net/1826/3632.

Full text

Abstract:

Thin walled beams warp under torsional and longitudinal loads. Warping restraint produces high longitudinal stresses. This is an analysis of the stress distribution in the side members of commercial vehicle chassis frames under the effects of the previously little studied longitudinal loads which may act on a truck chassis through spring hanger brackets. The structure analysed is a model chassis frame consisting of channel section side members and four cross members with different joint connections. The developed theories are incorporated into a special purpose finite element program which may

APA, Harvard, Vancouver, ISO, and other styles

2

Khan, Mahmudur Aryan. "A comparative Life Cycle Analysis of new and old designs of crane truck frames : Case study at Vemservice." Thesis, Mittuniversitetet, Avdelningen för ekoteknik och hållbart byggande, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-41976.

Full text

Abstract:

The main objective of this Bachelor’s thesis is to investigate and deliver the results of environmental impacts of two different designs of crane truck frames. The aim is to investigate if additional new design of crane truck frames, with less energy and transportation during manufacturing of the crane truck, can improve energy efficiency of crane trucks throughout their lifecycle. Case study object for this report is Vemservice in Vemdalen, Sweden. As basis for the report the The Life Cycle Analysis ISO 14040 and ISO 14044 are used in this report in order to evaluate and compare the environme

APA, Harvard, Vancouver, ISO, and other styles

3

Bäckström, Erik. "Model of dynamic behavior for frame mounted truck components." Thesis, KTH, Hållfasthetslära (Inst.), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-262884.

Full text

Abstract:

In the truck industry, it is crustal to test components against fatigue to make sure that the trucks stand up to the high demands on durability. Today’s testing methods have some disadvantages; it is quite a time-consuming process, but more important, similar tested components cannot easily be compared due to the load spread the components are subjected to. It is therefore desirable to test the components in a standardized way. One way to do this is to use a synthetic signal which is a large number of unique truck measurements combined. The synthetic signal only contains information of the fra

APA, Harvard, Vancouver, ISO, and other styles

4

Gavenda, Jiří. "Manipulační vozík pro manipulaci s velkonábalem o nosnosti 1500 kg." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230989.

Full text

Abstract:

The thesis discusses a constructional project of a simple handling truck for an easy taking out of a cone with the product of load capacity of 1500 kg from the line winder and removing it from the line. The aim is to propose a simple construction of the truck including a suggestion of a possible solution of the lift. It deals with its design including processing of important strength construction calculations and lifting parts. There is also a significant part of the work which includes the drawing documentation.

APA, Harvard, Vancouver, ISO, and other styles

5

Patricio, Paul Stephen. "Effects of Frame Design and Cab Suspension on the Ride Quality of Heavy Trucks." Thesis, Virginia Tech, 2002. http://hdl.handle.net/10919/34865.

Full text

Abstract:

Frame and cab suspension designs of Class 8 heavy trucks were investigated to see their effects on ride comfort. Four trucks were used in this study, each with a different frame: a factory low frame, a lightweight low frame, a factory high frame, and a lightweight high frame. There were two different frame heights and three thicknesses. Two different rear cab suspensions were also tried out on each truck. Both suspensions used two airsprings and two dampers mounted vertically to control the vertical motion. The first suspension used two horizontally mounted dampers to control the lateral motio

APA, Harvard, Vancouver, ISO, and other styles

6

Ballew, Brent Steven. "Advanced Multibody Dynamics Modeling of the Freight Train Truck System." Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/32707.

Full text

Abstract:

Previous work in the Railway Technology Laboratory at Virginia Tech focused on better capturing the dynamics of the friction wedge, modeled as a 3D rigid body. The current study extends that work to a half-truck model treated as an application of multibody dynamics with unilateral contact to model the friction wedge interactions with the bolster and the sideframe. The half-truck model created in MATLAB is a 3D, dynamic, multibody dynamics model comprised of four rigid bodies: a bolster, two friction wedges, and a sideframe assembly. The model allows each wedge four degrees of freedom: vertica

APA, Harvard, Vancouver, ISO, and other styles

7

Ford, Cassandra. "Vibration of steel framed floors due to running." Kansas State University, 2016. http://hdl.handle.net/2097/34488.

Full text

Abstract:

Master of Science<br>Department of Architectural Engineering and Construction Science<br>Bill Zhang<br>Vibration has been a consideration in many types of structures, and as the advancement of technology has allowed steel and concrete sections to become lighter, vibration has become more of a consideration in the design of structures. This report focuses on occupant induced vibration of steel framed floors due to running as the vibration source. The history of vibration analysis and criteria in structures is discussed. However, lack of research and experimentation on running as the source of

APA, Harvard, Vancouver, ISO, and other styles

8

Klembara, Lukáš. "Paletový dopravník." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228664.

Full text

Abstract:

This master’s thesis describes the structural design of pallet conveyor for the transport pallet unit between the ground floor and upper storey of warehouse buildings, according to given technical parameters. The work includes design and functional solution for driven roller track. It solves lifting of frame cage and roller track and the pallet unit, using traction gearless drive. There is used cable transfer 2:1. Frame cage is equipped with a mandatory safety gear. The design is verified strength calculations of the frame lift and frame cage. Part of the thesis is the drawing documentation.

APA, Harvard, Vancouver, ISO, and other styles

9

Leung, Joseph, Michio Aoyagi, Donald Billings, Herbert Hoy, Mei Lin, and Fred Shigemoto. "A MOBILE RANGE SYSTEM TO TRACK TELEMETRY FROM A HIGH-SPEED INSTRUMENTATION PACKAGE." International Foundation for Telemetering, 1998. http://hdl.handle.net/10150/607380.

Full text

Abstract:

International Telemetering Conference Proceedings / October 26-29, 1998 / Town & Country Resort Hotel and Convention Center, San Diego, California<br>As renewal interest in building vehicles based on hypersonic technologies begin to emerge again, test ranges anticipating in supporting flight research of these vehicles will face a set of engineering problems. Most fundamentals of these will be to track and gather error free telemetry from the vehicles in flight. The first series of vehicles will likely be reduced-scale models that restrict the locations and geometric shapes of the telemetr

APA, Harvard, Vancouver, ISO, and other styles

10

Bartel, Jindřich. "Přesuvna." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254371.

Full text

Abstract:

Diploma thesis deals with the design of transfer table for steel sheets with stroke using screw jacks. The thesis contains a technical balance sheet construction of electromechanical and hydraulic transfer table. The main work is a description of the conceptual solutions and description of selected components. The thesis includes calculations wheel drive and stroke, design and control wheel blocks and traversing chain. End of thesis includes strength finite element analysis with the determination of the maximum stress and strain. The work accompanying drawings.

APA, Harvard, Vancouver, ISO, and other styles

11

Martinů, Jan. "Návrh speciálního manipulátoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228405.

Full text

Abstract:

This thesis describes the design of a special manipulator, driven by a special mechanism with a pushed chain. The chain is conducted from the bottom branch of a horizontal guide slot via a chain wheel to the upper branch of a guide slot. To the end of the chain there is connected a frame manipulator via a tap connection. In this work there are described and suggested the most important component units of a manipulator, including a drive.

APA, Harvard, Vancouver, ISO, and other styles

12

Burýšek, Karel. "Rám návěsu NCH39 pro přepravu dříví." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229222.

Full text

Abstract:

This dissertation deals with the car trailer for wood transporting body frame concept. The main part of this work is a strength check of the supporting frame, further the design of suitable structural modifications and it’s check calculation of the stress state. The strength check of the frame is done by the help of the finite elements method. The part of this work is drawing documentation of the frame. This dissertation was developed in cooperation with SVAN Chrudim s.r.o., company.

APA, Harvard, Vancouver, ISO, and other styles

13

Přecechtílek, Pavel. "Přesuvna elektromechanická." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231227.

Full text

Abstract:

The aim of this thesis is to design a proposal of Transfer table electromechanical earmarked for transporting packs of sheets of tin with balance-sheet of electromechanical and electrohydraulic construction and to make important technical calculations. The introduction contains a description of the used constructional solution with the description of the individual parts of the transfer table and survey used components from different producer. The work includes functional calculations, which mainly includes the design and control of power running and lifting gear, calculate speeds and lift loa

APA, Harvard, Vancouver, ISO, and other styles

14

Sedláček, Jakub. "Nové brněnské hlavní nádraží a jeho veřejná prostranství." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-414285.

Full text

Abstract:

The topic of the Diploma thesis is a design of the New train station in Brno. The plot is located on the boundary of three city districts – Komárov, Štýřice and Trnitá. This area includes the railway structure for the new train station and also its public spaces, which are very close to the river Svratka. The railway structure is designed as bridge construction, that rises all platforms and rail tracks to 7,65 metres above the ground level. So all of the railways do not become a barrier in the city. The main concept extends a longitudinal axis of the city boulevard through the train station, w

APA, Harvard, Vancouver, ISO, and other styles

15

Drozd, Michal. "Vybrané části stavebně technologického projektu psychiatrické kliniky Fakultní nemocnice Brno." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409919.

Full text

Abstract:

The subject of my diploma thesis are selected parts of the construction technology project of the psychiatric clinic of the University Hospital Brno based on the provided project documentation. It is an extension of a new six-storey building to the existing buildings. The thesis contains a technical report to the construction technology project, the coordination situation of the construction, the situation of wider transport routes, time and financial plan by objects, study of the realization of the main technological stages, a site equipment design, a design of a machine set, technological re

APA, Harvard, Vancouver, ISO, and other styles

16

Vestin, Albin, and Gustav Strandberg. "Evaluation of Target Tracking Using Multiple Sensors and Non-Causal Algorithms." Thesis, Linköpings universitet, Reglerteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-160020.

Full text

Abstract:

Today, the main research field for the automotive industry is to find solutions for active safety. In order to perceive the surrounding environment, tracking nearby traffic objects plays an important role. Validation of the tracking performance is often done in staged traffic scenarios, where additional sensors, mounted on the vehicles, are used to obtain their true positions and velocities. The difficulty of evaluating the tracking performance complicates its development. An alternative approach studied in this thesis, is to record sequences and use non-causal algorithms, such as smoothing, i

APA, Harvard, Vancouver, ISO, and other styles

17

Šámalová, Daniela. "Dům krátké cesty." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-354940.

Full text

Abstract:

The assigned territory is situated in the City of Brno, in the city district of Židenice. From the west it is limited by the railway track Brno-Židenice, from the east by Koperníkova Street, from the north by Lazaretní Street and finally from the south by Bubeníčkova Street. Its area is approximately 45, 480 m2 which is 4,55 ha. From the urban perspective it is an intensive development in a separated block of the city with a protection zone. Total area is permeated by a few lines for pedestrians. The pedestrian zone provides better permeability of the area and better accessibility of the trade

APA, Harvard, Vancouver, ISO, and other styles

18

Kampf, Raymond William. "Fauxtopia." VCU Scholars Compass, 2004. http://scholarscompass.vcu.edu/etd/749.

Full text

Abstract:

To all who come to this fictitious place:Welcome.Fauxtopia is your land. Here, age relives distorted memories of the past, and here, youth may savor the challenge of trying to understand the present. Fauxtopia is made up of the ideals, the dreams and the fuzzy facts which have re-created reality... with the hope that it will be a source of edutainment for all the world.Ray KampfFauxtopia DedicationApril 1st, 2004

APA, Harvard, Vancouver, ISO, and other styles

19

Chien, Sheng-Kuo, and 簡勝國. "Limit Load Analysis of Steel Frames and Ladder Truck." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/rspt8h.

Full text

Abstract:

碩士<br>朝陽科技大學<br>營建工程系碩士班<br>92<br>First, this thesis studied the deformed shapes, the maximum lateral resisting forces, and the collapsed mechanism of a steel-framed factory under 921 earthquake. Then, this project investigated the vertical limit load-displacement relationship, and the base shear-displacement relationship of the ladder truck suffering from vertical load and the horizontal wind load. There are 2 types in ladder truck. The first one is the folded ladder truck including 12 different angle combinations. The other one is the assurgent ladder truck including 5 different angle combin

APA, Harvard, Vancouver, ISO, and other styles

20

Liu, Yu-Wei, and 劉鈺韋. "High Speed Frame Grabber and Sleepers Positioning for Track Monitoring System." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/45344297730003781871.

Full text

Abstract:

碩士<br>國立臺灣科技大學<br>電機工程系<br>98<br>In recent years, along with the improvement of the image processing technology, image recognition has already become the mainstream method of object inspection. The quality of images will directly affect the image-recognition rate. In track monitoring systems, track conditions will affect driving security of trains. Therefore, the conditions of track systems are very important. In this research, a high speed frame grabber system and the triggering rate of its line scan camera can be adjusted to match the vehicle speed so that the pixels per inch of an image are

APA, Harvard, Vancouver, ISO, and other styles

21

ZHAN, JIA-TAI, and 詹家泰. "The switch trunk buffer managment for congestion control in frame relay network." Thesis, 1992. http://ndltd.ncl.edu.tw/handle/65174171964690514557.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Lin, Ruei-Yu, and 林瑞郁. "20 FPS Real-time Visual SLAM with Frame Rate and Lost Track Optimization." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/a9m379.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Shen, Chi-Hsiang, and 沈啓祥. "Apply Six Sigma Method to Study Press DIE Force Balance in Stamping Procedure for Truck Chassis Frame －The Case of A Company." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/uwuq8r.

Full text

Abstract:

碩士<br>中原大學<br>企業管理研究所<br>105<br>Abstract With the rapid alteration of global economy and technology, the technique innovation would become the key success factor for enterprises. Then the proactive practice of technological innovation is to initiate the research. Base on the above, this study using D-M-A-I-C steps of Six Sigma, applying in the truck chassis frame of press DIE force balance in the stamping process design. Besides, this study attempts to establish a standard operating procedures(SOP), which puts into mold design practice operating procedures, in order to be the reference in pr

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!