Log in

Relevant bibliographies by topics / Tune Mass damper (tmd) / Journal articles

To see the other types of publications on this topic, follow the link: Tune Mass damper (tmd).

Journal articles on the topic 'Tune Mass damper (tmd)'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Tune Mass damper (tmd).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Amit, Raosaheb Shinde*1 Audumbar Mukund Sarvade2 &. Abhijit Ramesh Patil3. "APPLICATION OF TMD FOR VIBRATION CONTROL OF CHIMNEY." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 9, no. 5 (2020): 228–32. https://doi.org/10.5281/zenodo.3870405.

Full text

Abstract:

Many tall and overhanging structures are susceptible to vibrations. Most of industrial chimneys and steel towers are structures particularly sensitive to the dynamic effect of wind and earthquake. This vibration of structure is control by various damping devices or dissipation methods. The tuned mass damper (TMD) is widely used passive vibration damping treatment. These devices are viscously damped to 2nd order systems appended to a vibrating structure. Proper selection of the parameters of these appendages, tunes the TMD to one of the natural frequencies of the under damped flexible structure

APA, Harvard, Vancouver, ISO, and other styles

2

Kwon, Oh Hoon, and Shin Hyoung Park. "Comparing the Effectiveness of Friction Damper and Tuned Mass Damper Using Numerical Simulation." Applied Mechanics and Materials 835 (May 2016): 455–60. http://dx.doi.org/10.4028/www.scientific.net/amm.835.455.

Full text

Abstract:

The purpose of this study is to evaluate and compare the effectiveness of friction dampers and tuned mass dampers (TMD) using numerical simulations. Wind and earthquake loads are simulated on a 15-story model building structure in which a friction damper and/or a TMD are installed. The idealized one-dimensional structure with a friction damper at each story and/or a TMD at the top of the building is subjected to a simulated load, and the displacement and acceleration responses of the structure are measured. The outcomes show that a TMD is more useful to control the vibration of the building fr

APA, Harvard, Vancouver, ISO, and other styles

3

Krushna, Sawant* 1. Dr. Ashok S. Kasnale2 &. Prof. Manoj Deosarkar3. "AN EXPERIMENTAL STUDY ON TUNED LIQUID DAMPER AND MASS DAMPER UNDER DYNAMIC LOADING FOR FRAME STRUCTURES." GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES 5, no. 7 (2018): 346–52. https://doi.org/10.5281/zenodo.1316905.

Full text

Abstract:

In this paper, the liquid damper (TLD) and mass damper (TMD) are usedto minimize the structuralretort due to moving action. Several experimental sets are measuredon a model of structure TLDand TMD systems to check their efficiencies under vocal excitation. Rectangular shapes ofTLD with altered type ofliquiddeepness ratios are checked and various frequency ratios are measured. The experimental revision was approved by expending shake table apparatus. The various values are measured using accelerometers and LVDT sensors. Trendysituation of TMD the toughness and restraining are remain constant fo

APA, Harvard, Vancouver, ISO, and other styles

4

Bathaei, Akbar, Sasan Mostaghimi Tehrani, and Morteza Raissi Dehkordi. "Vibrations Control of a SODF Structure Using TMD and MR Damper with Fuzzy Logic Algorithm Based on Velocity." Journal of Civil Engineering and Construction 13, no. 4 (2024): 179–91. http://dx.doi.org/10.32732/jcec.2024.13.4.179.

Full text

Abstract:

In this study, the effects of using a passive tuned mass damper (TMD) with optimal parameters and a semi-active magnetorheological damper (MR damper) have been evaluated separately and simultaneously to control seismic vibrations of a linear single degree of freedom system, which was a simple "mass-spring-damper" model. OpenSEES software was used to model the single degree of freedom system and TMD, and MATLAB software was used to model MR damper. Fuzzy logic algorithm was used by MATLAB to determine the appropriate voltage for MR damper. By solving the dynamic equation of the damper, its forc

APA, Harvard, Vancouver, ISO, and other styles

5

Chesné, Simon. "Hybrid skyhook mass damper." Mechanics & Industry 22 (2021): 49. http://dx.doi.org/10.1051/meca/2021050.

Full text

Abstract:

The objective of this study is to increase the efficiency of an initial passive Tuned Mass Damper (TMD) by adding an active control unit. A critical issue in many engineering domains is the design of fail-safe active systems. The proposed hybrid system aims to address this issue and realizes the said objective. It emulates the behavior of a skyhook damper parallel to a passive TMD. Skyhook dampers acts like viscous dampers connected to the ground, reducing the vibration amplitudes without any overshoot. It can be difficult to design a specific control law to obtain a desired dynamical behavior

APA, Harvard, Vancouver, ISO, and other styles

6

Setareh, Mehdi. "Floor vibration control using semi-active tuned mass dampers." Canadian Journal of Civil Engineering 29, no. 1 (2002): 76–84. http://dx.doi.org/10.1139/l01-063.

Full text

Abstract:

This paper discusses the application of a new class of semi-active tuned mass dampers, called ground-hook tuned mass dampers (GHTMD), for the reduction of floor vibrations due to human movements. The TMD introduced uses a continuously variable semi-active damper (ground-hook damper) to achieve reduction in the floor acceleration. Here, the GHTMD is applied to a single degree of freedom system representative of building floors. The GHTMD design parameters are defined in terms of non-dimensional values. The optimum values of these parameters are found based on the minimization of the acceleratio

APA, Harvard, Vancouver, ISO, and other styles

7

A. Salh, Hayaty, and Amer M. Ibrahim. "Enhancing Building Stability and Seismic Resilience with Water-Added Tuned Mass Dampers." Bilad Alrafidain Journal for Engineering Science and Technology 3, no. 2 (2024): 154–61. http://dx.doi.org/10.56990/bajest/2024.030211.

Full text

Abstract:

These days, the construction industry is increasingly producing buildings with extremely low damping values. Under structural vibrations caused by storms and earthquakes, structures can collapse easily. There are now several methods for reducing structural vibrations, and one of the methods currently employed is the Tuned Mass Damper (TMD). Research is being conducted to determine its performance and importance. The entire damper was tuned for various constructions. An eight-story model specifically designed for the structure was used in this study to observe the structure's response with and

APA, Harvard, Vancouver, ISO, and other styles

8

Tophøj, Laust, Nikolaj Grathwol, and Svend Hansen. "Effective Mass of Tuned Mass Dampers." Vibration 1, no. 1 (2018): 192–206. http://dx.doi.org/10.3390/vibration1010014.

Full text

Abstract:

Tuned Mass Dampers (TMDs) are widely used for the control and mitigation of vibrations in engineering structures, including buildings, towers, bridges and wind turbines. The traditional representation of a TMD is a point mass connected to the structure by a spring and a dashpot. However, many TMDs differ from this model by having multiple mass components with motions of different magnitudes and directions. We say that such TMDs have added mass. Added mass is rarely introduced intentionally, but often arises as a by-product of the TMD suspension system or the damping mechanism. Examples include

APA, Harvard, Vancouver, ISO, and other styles

9

Wang, Min, Yan Lin Zhang, and Tao Zan. "Performance Optimization and Comparison of TMD, MTMD and DTMD for Machining Chatter Control." Advanced Materials Research 199-200 (February 2011): 1165–70. http://dx.doi.org/10.4028/www.scientific.net/amr.199-200.1165.

Full text

Abstract:

This paper investigates and analyzes the performances of several types of tuned mass damper (TMD) including common single TMD(STMD), multiple tuned mass dampers (MTMD) and dual tuned mass dampers (DTMD) on the machining chatter control. Considering the special nature of the machining stability problem, the optimal design parameters of the dampers are defined as those that minimize the magnitude of the real part of the FRF of the damped machining system. This paper demonstrates the performance of the optimally designed different TMDs for machining stability improvement by calculating the stabil

APA, Harvard, Vancouver, ISO, and other styles

10

Fu, Bo, Huanjun Jiang, and Jin Chen. "Substructure Shake Table Testing of Frame Structure–Damper System Using Model-Based Integration Algorithms and Finite Element Method: Numerical Study." Symmetry 13, no. 9 (2021): 1739. http://dx.doi.org/10.3390/sym13091739.

Full text

Abstract:

Substructure shake table testing (SSTT) is an advanced experimental technique that is suitable for investigating the vibration control of secondary structure-type dampers such as tuned mass dampers (TMDs). The primary structure and damper are considered as analytical and experimental substructures, respectively. The analytical substructures of existing SSTTs have mostly been simplified as SDOF structures or shear-type structures, which is not realistic. A common trend is to simulate the analytical substructure via the finite element (FE) method. In this study, the control effects of four dampe

APA, Harvard, Vancouver, ISO, and other styles

11

LI, CHUNXIANG. "PERFORMANCE OF DUAL-LAYER MULTIPLE TUNED MASS DAMPERS FOR STRUCTURES UNDER GROUND EXCITATIONS." International Journal of Structural Stability and Dynamics 06, no. 04 (2006): 541–57. http://dx.doi.org/10.1142/s0219455406002106.

Full text

Abstract:

The dual-layer multiple tuned mass dampers (DL-MTMD) with a uniform distribution of natural frequencies are proposed, which consist of one large tuned mass damper (L-TMD) and an arbitrary number of small tuned mass dampers (S-TMD). The structure is represented by a generalized system corresponding to the specific vibration mode to be controlled. The criterion for assessing the optimum parameters and effectiveness of the DL-MTMD is based on the minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure installed with the DL-MTMD. Also considered is th

APA, Harvard, Vancouver, ISO, and other styles

12

Brzeski, Piotr, Mateusz Lazarek, and Przemyslaw Perlikowski. "Influence of Variable Damping Coefficient on Efficiency of TMD with Inerter." Energies 13, no. 23 (2020): 6175. http://dx.doi.org/10.3390/en13236175.

Full text

Abstract:

In this paper, we study the dynamics of a two-degree freedom system consisting of the main body and tuned mass damper with inerter (TMDI). We add the dash-pot with variable damping coefficient to TMDI to study the overall efficiency of the device. We investigate different types of the non-linear characteristic of the dash-pot. We investigate devices in which damping coefficient change according to the relative displacement or the relative velocity between the damped mass and tuned mass damper. We also include in the investigation of different types of control functions. We show the two-paramet

APA, Harvard, Vancouver, ISO, and other styles

13

Liang, Dong, and Ji Xiang Song. "Theoretical Study on Cable’s Vibration Control by Single TMD." Advanced Materials Research 935 (May 2014): 211–14. http://dx.doi.org/10.4028/www.scientific.net/amr.935.211.

Full text

Abstract:

The commonly used viscous dampers for cable’s vibration mitigation have some unfavorable factors, such as the damping effect is not obvious for super long stay cable, the limitation of installation position, coupling vibration, etc. The cable-tuned mass damper system vibration model is put forward to solve this problem. The optimal cable-tuned mass damper system modal damping ratio and optimum design parameters, including cable vibration order, TMD’s stiffness, TMD’s mass, and TMD’s damping, were obtained by the method of complex models. The results can provide important reference for the desi

APA, Harvard, Vancouver, ISO, and other styles

14

Akbar, Muhammad Ayaz, Wai-On Wong, and Emiliano Rustighi. "A Hybrid Damper with Tunable Particle Impact Damping and Coulomb Friction." Machines 11, no. 5 (2023): 545. http://dx.doi.org/10.3390/machines11050545.

Full text

Abstract:

A particle impact damper (PID) dissipates the vibration energy of a structure through impacts within the damper. The PID is not commonly used in practice mainly because of its low damping-to-mass ratio and the difficulty in achieving its optimal design due to its nonlinear characteristics. In contrast, a Coulomb friction damper (FD) can offer a higher damping force-to-mass ratio than other dampers, but it is also difficult to be controlled precisely due to its nonlinear characteristics and excessive frequency sensitivity regarding the resonant frequency. This paper examines a hybrid damper by

APA, Harvard, Vancouver, ISO, and other styles

15

Sobhanian, Reza, Jamshid Sabouri, and Rouzbeh Dabiri. "Optimal parameter design of multiple tuned mass damper for tall buildings using multi-objective particle swarm optimization algorithm considering soil-structure interaction effects." Cadernos de Educação Tecnologia e Sociedade 17, se3 (2024): 216–30. https://doi.org/10.14571/brajets.v17.nse3.216-230.

Full text

Abstract:

This study focuses on controlling structural vibrations during earthquakes by utilizing tuned mass dampers (TMD) to minimize structural responses. The optimization of damper parameters is crucial for achieving this goal. The research explores the use of multiple tuned mass dampers (MTMD) in place of a single TMD in the roof story. The impact of soil-structure interaction (SSI) on seismic responses is considered, necessitating an investigation into optimizing damper characteristics across different floors. Equations of motion for structures with multiple dampers and SSI were developed, and the

APA, Harvard, Vancouver, ISO, and other styles

16

Lu, Shan Lang, Jian Fang Fu, and Jian Lin Zhang. "Three-Dimensional Wind-Induced Vibration Control Using MTMD Based on Energy Balance Theory." Applied Mechanics and Materials 590 (June 2014): 116–20. http://dx.doi.org/10.4028/www.scientific.net/amm.590.116.

Full text

Abstract:

In this paper, three-dimensional wind-induced vibration control is investigated by using multiple tuned mass dampers (MTMD). A 20-story steel frame is take as a numerical example to compare the two control effects by using MTMD and TMD (tuned mass damper), in which the same control masses are set on the top floor respectively. The parameters and locations of the damper devices could be chosen optimally based on energy balance theory and genetic algorithm. Numerical results show that the total damp value and the total structural dissipative energy of MTMD is lower than TMD while the total mass

APA, Harvard, Vancouver, ISO, and other styles

17

Mohammed, Zameer Ahamed J. "Study and Behaviour of Seismic Vibration Control of Skew and Non Skew Bridges Using Multiple Tune Dampers." Journal of Engineering Analysis and Design 4, no. 3 (2022): 1–9. https://doi.org/10.5281/zenodo.7414474.

Full text

Abstract:

One of the most difficult tasks for civil engineers is to reduce structural vibration caused by dynamic loads in order to avoid potential damage and human and economic losses. The response of a system can be reduced by reducing external disturbance. However, in some cases, this may not be possible. Modifying a system to prevent the occurrence of resonance, on the other hand, may necessitate significant redesigning. It would also be difficult to apply it to existing structures I. As a result, using vibration control devices as a reliable and simple method was introduced. These devices are simpl

APA, Harvard, Vancouver, ISO, and other styles

18

Hadizadeh, F., F. Akhlaghi Amiri, and H. Shariatmadar. "Performance of Structure Equipped AP-TMD Compared with MTMD, ATMD, and PTMD against Earthquake Using Genetic Fuzzy Algorithm." Advances in Civil Engineering 2022 (August 29, 2022): 1–20. http://dx.doi.org/10.1155/2022/6931212.

Full text

Abstract:

During the past years, different control devices have been introduced and used to reduce the response of structures. This article presents the performance of active-passive tuned mass dampers (AP-TMDs) in the reduction of structural responses and a comparison between the uses of different controllers, including tuned mass damper (TMD), active tuned mass damper (ATMD), and multituned mass damper (MTMD). Analyzing and modeling the structure under four near- and far-field earthquakes are performed in MATLAB and SIMULINK. Finally, the responses of controlled and uncontrolled structures equipped wi

APA, Harvard, Vancouver, ISO, and other styles

19

Dai, Yu Wei, Chao Liu, Wen Feng Li, and Li Tian. "Research on Tuned Mass Damper for Vibration Control of Tower under Multi-Dimensional Seismic Excitations." Applied Mechanics and Materials 353-356 (August 2013): 2181–86. http://dx.doi.org/10.4028/www.scientific.net/amm.353-356.2181.

Full text

Abstract:

The tuned mass damper (TMD) for vibration control of tower subjected to multi-dimensional seismic excitations is studied in this paper. Calculation model of the tuned mass damper is introduced, and the equations of motion of a tower with tuned mass damper are derived, and the calculation parameters of the tuned mass damper are given based on the control structure. According to a practical engineering, the three-dimensional finite element model of a tower is established using SAP2000. Three typical seismic records are selected according the code of seismic design. Vibration control for tower mo

APA, Harvard, Vancouver, ISO, and other styles

20

Tian, Li, Qian Wang, Qiqi Yu, and Nuwen Xu. "Wind-induced Vibration Optimal Control for Long Span Transmission Tower-line System." Open Civil Engineering Journal 7, no. 1 (2013): 159–63. http://dx.doi.org/10.2174/1874149501307010159.

Full text

Abstract:

In this paper, tuned mass dampers with optimal parameters for long span transmission tower-line system are investigated. Equations of motion for a structure-TMD system are derived, and the parameters of TMD, stiffness and damping are optimized, respectively. According to a real project, three-dimensional finite element models of both transmission tower and transmission tower-line system are created and their vibration performances are analyzed using SAP2000 software, respectively. Wind load time history is simulated based on wind theory. Using numerical simulation, vibration control with optim

APA, Harvard, Vancouver, ISO, and other styles

21

Parveen P, Sadha, and Anila S. "Seismic Analysis of RCC Buildings Using Water Tanks as Tuned Liquid Mass Dampers." Journal of Recent Activities in Architectural Sciences 8, no. 1 (2023): 20–28. http://dx.doi.org/10.46610/joraas.2023.v08i01.003.

Full text

Abstract:

A Tuned Mass Damper (TMD) is a device that is mounted to a structure to reduce the dynamic response of the structure. It is made up of a mass, a spring, and a damper. The damper's frequency is tuned to a specific structural frequency, and when that frequency is excited, it will resonate in an opposite direction to the structural motion. Tuned Liquid Mass Dampers are more recommended when compared to Tuned Mass Damper due to their respective advantages. The overhead water tanks can act as Tuned Liquid Mass Dampers. In this study, the overhead water tanks in RCC buildings are used to represent l

APA, Harvard, Vancouver, ISO, and other styles

22

Sundar, K. P. Shiyam, Johny Sebastian, M. K. Shrimali, and S. D. Bharti. "Dynamic Response Reduction of Reinforced Concrete Structure using Tuned Mass Damper and Tuned Liquid Damper." Proceedings of the 12th Structural Engineering Convention, SEC 2022: Themes 1-2 1, no. 1 (2022): 1699–705. http://dx.doi.org/10.38208/acp.v1.707.

Full text

Abstract:

Damping devices are used to reduce the dynamic response of a structure by energy dissipation. Common types of damping devices are fluid viscous dampers, tuned mass dampers, and tuned liquid dampers. This project aims to study the effectiveness of TMD and TLD in controlling the response of the structure when it is subjected to acceleration records of different earthquakes. A 20-storey reinforced concrete bare frame structure has been subjected to two earthquake acceleration records with and without dampers in SAP 2000. The dampers are modelled using link elements. The structure is attached with

APA, Harvard, Vancouver, ISO, and other styles

23

Yau, J. D. "Train-Induced Vibration Control of Simple Beams Using String-Type Tuned Mass Dampers." Journal of Mechanics 23, no. 4 (2007): 329–40. http://dx.doi.org/10.1017/s1727719100001386.

Full text

Abstract:

AbstractSince a long-term oscillation of a tuned mass damper (or TMD) in vibration control may impair the spring stiffness of the TMD, this phenomenon will directly down-tune the target frequency of the TMD. For this reason, this study intends to present a string-type tuned mass damper (or STMD) with an adjustable tuning frequency to mitigate the resonant response of a simple beam due to moving loads. The STMD device is installed inside the inner room of a bridge box girder and is composed of a distributed spring-dashpot-mass with a stretched string. Considering a linear beam-STMD model, a gen

APA, Harvard, Vancouver, ISO, and other styles

24

Tian, Li, and Yujie Zeng. "Parametric Study of Tuned Mass Dampers for Long Span Transmission Tower-Line System under Wind Loads." Shock and Vibration 2016 (2016): 1–11. http://dx.doi.org/10.1155/2016/4965056.

Full text

Abstract:

A parametric study of tuned mass dampers for a long span transmission tower-line system under wind loads is done in this paper. A three-dimensional finite element model of transmission tower-line system is established by SAP2000 software to numerically verify the effectiveness of the tuned mass damper device. The wind load time history is simulated based on Kaimal spectrum by the harmony superposition method. The equations of motion of a system with tuned mass damper under wind load excitation are proposed, and the schematic of tuned mass damper is introduced. The effects of mass ratio, freque

APA, Harvard, Vancouver, ISO, and other styles

25

T. P., Suja, and Srinivasan Chandrasekaran. "Response control of TLP with Single TMD under wind, wave, and current." Maritime Technology and Research 7, no. 1 (2024): Manuscript. http://dx.doi.org/10.33175/mtr.2025.272515.

Full text

Abstract:

Offshore Tension Leg Platforms (TLP) are hybrid structures, that encounter large offsets under random sea. It imposes large displacements, resulting in operational challenges under extreme sea states. The key to safe topside operation is to minimize the response in flexible modes using appropriate control mechanisms. The present study evaluates the response control of TLP with tuned mass dampers under different sea state environments. The damper is positioned such that the mass center of the primary and secondary system is concurrent. It is enabled only with surge motion, which controls the pl

APA, Harvard, Vancouver, ISO, and other styles

26

Zhang, Peng, Jie Tan, Haitao Liu, Gang Yang, and Chunyi Cui. "Seismic Vibration Mitigation of a Cable-Stayed Bridge with Asymmetric Pounding Tuned Mass Damper." Mathematical Problems in Engineering 2021 (April 29, 2021): 1–13. http://dx.doi.org/10.1155/2021/6647303.

Full text

Abstract:

In order to mitigate the seismic response of a cable-stayed bridge, a new type damping device named asymmetric pounding tuned mass damper (APTMD) is developed in this paper on the basis of the traditional symmetric pounding tuned mass damper. The novel APTMD has three parameters to be determined: the left-side gap, the right-side gap, and the frequency ratio. A numerical model of the APTMD damping system is established with consideration of both the computational efficiency and accuracy to enable the parametric optimization of the damper. The numerical model is based on a simplified model of t

APA, Harvard, Vancouver, ISO, and other styles

27

Yao, Che, Dejian Li, and Xiaojun Wei. "Vibration Suppression of Two Adjacent Cables Using an Interconnected Tuned Mass Damper/Nonlinear Energy Sink." Journal of Marine Science and Engineering 12, no. 7 (2024): 1096. http://dx.doi.org/10.3390/jmse12071096.

Full text

Abstract:

Due to their high flexibility, low damping, and small mass, stay cables are prone to large-amplitude vibrations. Various mechanical measures, typically installed near the cable anchorage to the deck, have been developed to suppress cable vibration. These dampers, however, may not be effective for ultralong cables since the damper is close to the cable anchorage, the cable node. In this paper, a tuned mass damper (TMD)/nonlinear energy sink (NES) are considered for installation between two adjacent stay cables for vibration mitigation. Firstly, the static equilibrium equation of the stay cable–

APA, Harvard, Vancouver, ISO, and other styles

28

Octarena Nugroho, Wivia, Dina Rubiana Widarda, and Oryza Herdha Dwyana. "Analysis study the used of Tuned Mass Damper (TMD) on an existing train bridge due to high speed train with moving mass load approach." MATEC Web of Conferences 258 (2019): 05005. http://dx.doi.org/10.1051/matecconf/201925805005.

Full text

Abstract:

As the need of the train speed increased, the existing bridges need to be evaluated, especially in dynamic responses, which are deformation and acceleration. In this study, Cisomang Bridge is modeled and analyzed due to the high-speed train SJ X2 in varying speeds, 50 km/h, 100 km/h, 150 km/h, and 200 km/h. The used of tuned mass damper also will be varied on its setting and placing. The tuned mass dampers setting be varied based on the first or second natural frequency and the placing of tuned mass damper be varied based on maximum deformation of the first or second mode. Moreover, the tuned

APA, Harvard, Vancouver, ISO, and other styles

29

He, Hao Xiang, En Zhen Han, and Yong Wei Lv. "Coupled Vibration Control of Tuned Mass Damper in Both Horizontal and Torsional Direction." Applied Mechanics and Materials 578-579 (July 2014): 1000–1006. http://dx.doi.org/10.4028/www.scientific.net/amm.578-579.1000.

Full text

Abstract:

Traditional tuned mass damper (TMD) can reduce the dynamic response of structure under earthquake, but the traditional tuned mass damper is not effective to reduce translation-torsion coupled vibration. A two-directional horizontal and torsional tuned mass damper, which includes tuned mass blocks, torsional blocks and rotation lever, is proposed. The horizontal and torsional response of the building structure is controlled by the movement and the rotation of the multi-dimensional tuned mass damper (MDTMD) in different directions. According to the movement mechanism of the MDTMD, the dynamic eq

APA, Harvard, Vancouver, ISO, and other styles

30

Suryadi, Dedi, M. Rasyid Ridlo, Novalio Daratha, and Indra Agustian. "Pengaruh Tuned Mass Damper (TMD) Terhadap Respons Getaran pada Struktur Bangunan." Semesta Teknika 24, no. 2 (2021): 84–92. http://dx.doi.org/10.18196/st.v24i2.12727.

Full text

Abstract:

Penelitian ini didasari oleh banyaknya kehancuran struktur bangunan yang terjadi akibat gempa bumi, sehingga dibutuhkan suatu sistem peredam yang efektif sebagai solusi untuk struktur bangunan. Penelitian ini menganalisis pengaruh penambahan Tuned Mass Damper (TMD) pada struktur bangunan berlantai satu. Penelitian ini dilakukan pengujian secara eksperimental dengan cara membandingkan respons getaran struktur tanpa TMD dan dengan penambahan TMD. Nilai rasio massa dan kekakuan yang gunakan masing-masing adalah dari 2% sampai 20% dari nilai parameter struktur utama dengan variasi kenaikan 2% untu

APA, Harvard, Vancouver, ISO, and other styles

31

Kaloop, Mosbeh R., Jong Wan Hu, and Yasser Bigdeli. "The Performance of Structure-Controller Coupled Systems Analysis Using Probabilistic Evaluation and Identification Model Approach." Shock and Vibration 2017 (2017): 1–11. http://dx.doi.org/10.1155/2017/5482307.

Full text

Abstract:

This study evaluates the performance of passively controlled steel frame building under dynamic loads using time series analysis. A novel application is utilized for the time and frequency domains evaluation to analyze the behavior of controlling systems. In addition, the autoregressive moving average (ARMA) neural networks are employed to identify the performance of the controller system. Three passive vibration control devices are utilized in this study, namely, tuned mass damper (TMD), tuned liquid damper (TLD), and tuned liquid column damper (TLCD). The results show that the TMD control sy

APA, Harvard, Vancouver, ISO, and other styles

32

Wang, Qinhua, Haoshuai Qiao, Dario De Domenico, Zhiwen Zhu, and Zhuangning Xie. "Wind-Induced Response Control of High-Rise Buildings Using Inerter-Based Vibration Absorbers." Applied Sciences 9, no. 23 (2019): 5045. http://dx.doi.org/10.3390/app9235045.

Full text

Abstract:

The beneficial mass-amplification effect induced by the inerter can be conveniently used in enhanced variants of the traditional Tuned Mass Damper (TMD), namely the Tuned Mass-Damper-Inerter (TMDI) and its special case of Tuned Inerter Damper (TID). In this paper, these inerter-based vibration absorbers are studied for mitigating the wind-induced response of high-rise buildings, with particular emphasis on a 340 m tall building analyzed as case study. To adopt a realistic wind-excitation model, the analysis is based on aerodynamic forces computed through experimental wind tunnel tests for a sc

APA, Harvard, Vancouver, ISO, and other styles

33

Ariadi, Deni. "Optimasi Tuned Mass Damper Pada Bangunan di Daerah Gempa Menggunakan Algoritma Genetika." Kurva S : Jurnal Keilmuan dan Aplikasi Teknik Sipil 5, no. 3 (2017): 107. http://dx.doi.org/10.31293/teknikd.v4i2.2011.

Full text

Abstract:

ABSTRAKTuned mass damper (TMD) telah banyak digunakan untuk mengendalikan getaran dalam sistem teknik mesin. Dalam beberapa tahun terakhir teori TMD telah diadopsi untuk mengurangi getaran pada gedung-gedung tinggi dan struktur teknik sipil lainnya. Peredam dinamis dan tuned mass damper adalah realisasi dari untuk aplikasi mengontrol getaran struktur. Unsur-unsur inersia, daktail dalam perangkat tersebut adalah: massa, pegas dan dashpot (atau redaman material). Konfigurasi lain seperti pendulum/peredam, dan peredam cair (liquid), juga telah digunakan untuk aplikasi pengurangan getaran.TMD mele

APA, Harvard, Vancouver, ISO, and other styles

34

Tan, Jie, Siu Michael Ho, Peng Zhang, and Jinwei Jiang. "Experimental Study on Vibration Control of Suspended Piping System by Single-Sided Pounding Tuned Mass Damper." Applied Sciences 9, no. 2 (2019): 285. http://dx.doi.org/10.3390/app9020285.

Full text

Abstract:

Suspended piping systems often suffer from severe damages when subjected to seismic excitation. Due to the high flexibility of the piping systems, reducing their displacement is important for the prevention of damage during times of disaster. A solution to protecting piping systems during heavy excitation is the use of the emerging pounding tuned mass damper (PTMD) technology. In particular, the single-sided PTMD combines the advantages of the tuned mass damper (TMD) and the impact damper, including the benefits of a simple design and rapid, efficient energy dissipation. In this paper, two sin

APA, Harvard, Vancouver, ISO, and other styles

35

Prof., Syed Farroqh Anwar, Mohammed Mr.Noor, and Zeeshan Ali Syed. "EFFECT OF TUNE MASS DAMPER (TMD) ON HIGHRISE BUILDING SUBJECTEDTO LATERAL LOADS." GLOBAL JOURNAL OF ENGINEERING SCIENCE AND RESEARCHES 4, no. 8 (2017): 16–23. https://doi.org/10.5281/zenodo.840837.

Full text

Abstract:

Strong earthquakes have occurred in many countries and have caused many problems including casualties, economic loss, destruction of infrastructures, and even leaking of radioactive materials. Therefore, earthquake resistant design and reinforcement of existing structures have become increasingly more important due to increasing probability of strong earthquakes. Especially, a higher level of earthquake resistance is required for infrastructures and industrial facilities as it has been shown in historical earthquake studies. In the field of the structural; engineering the major aspect of analy

APA, Harvard, Vancouver, ISO, and other styles

36

Abdel-Rohman, Mohamed, and Hasan Askar. "Control by Passive TMD of Wind-Induced Nonlinear Vibrations in Cable Stayed Bridges." Journal of Vibration and Control 2, no. 2 (1996): 251–67. http://dx.doi.org/10.1177/107754639600200206.

Full text

Abstract:

This paper investigates the effect of using a tuned mass damper (TMD) on the wind-induced nonlinear response of cable stayed bridges. It is shown how to determine the optimal mass of the passive tuned mass damper to obtain the highest damping in the bridge.

APA, Harvard, Vancouver, ISO, and other styles

37

Zhang, Xuan, Qiang Han, Kaiming Bi, and Xiuli Du. "An improved multi-mode seismic vibration control method using multiple tuned mass dampers." Advances in Structural Engineering 25, no. 4 (2022): 804–19. http://dx.doi.org/10.1177/13694332211050977.

Full text

Abstract:

Multiple vibration modes of an engineering structure might be excited by earthquake ground motions. Multiple tuned mass dampers (MTMDs) are widely used to control these multi-mode vibrations. However, in the commonly used MTMD system, the mass element in each tuned mass damper (TMD) is normally assumed to be the same. To improve the performance of MTMDs for seismic-induced vibration control, non-uniform MTMD masses are adopted in the present study to improve the mass utilization of TMD, and a location factor is proposed to determine the best location of each TMD in the MTMD system. The effecti

APA, Harvard, Vancouver, ISO, and other styles

38

Ariadi, Deni. "APLIKASI ALGORITMA GENETIKA DALAM MENGOPTIMASI TUNED MASS DAMPER UNTUK MEREDUKSI GETARAN PADA GEDUNG AKIBAT BEBAN GEMPA." Jurnal Kacapuri : Jurnal Keilmuan Teknik Sipil 4, no. 1 (2021): 19. http://dx.doi.org/10.31602/jk.v4i1.5125.

Full text

Abstract:

Pergerakan tanah (gempa) merupakan salah satu beban yang dapat menyebabkan kerusakan pada struktur. Sementara itu di Indonesia merupakan daerah rawan gempa sehingga menuntut perlunya pertimbangan untuk membangun struktur bangunan yang tahan dan adaptif terhadap beban gempa. Oleh sebab itu, evaluasi total kinerja struktur bangunan sangat penting untuk dilakukan. Redaman adalah fenomena yang ada dalam setiap struktur, fenomena tersebut dapat mengurangi getaran yang disebabkan oleh kekuatan eksternal untuk diterapkan sistem struktur. Berbagai jenis peredam telah dikenal dewasa ini, salah satunya

APA, Harvard, Vancouver, ISO, and other styles

39

Varanay Khurana. "Evaluate the Dynamic response of Buildings to Seismic Forces, Considering the Interaction between human Occupants and Structural vibrations." Journal of Advances and Scholarly Researches in Allied Education 21, no. 5 (2024): 134–40. http://dx.doi.org/10.29070/gc8fna08.

Full text

Abstract:

Damage to buildings and other structures may occur when dynamic loads, caused by earthquake vibrations, drive the ground and everything related to it to shake in a complicated way. Civil engineers are always thinking of new methods to deal with this inevitable problem. Humans put stress on a variety of buildings, including floors, footbridges, stadiums, and more. Modern material and manufacturing technology, together with human desire for aesthetics, have made it possible to build long span structures like bridges, stadiums, floors, etc. that are sleek, lightweight, and slim. To dampen a struc

APA, Harvard, Vancouver, ISO, and other styles

40

Liu, Xi Jun, Xiao Qin Yuan, and Su Xia Zhang. "Simply Supported Box Girder Bridge Vibration Control with MR-TMD." Applied Mechanics and Materials 90-93 (September 2011): 1010–14. http://dx.doi.org/10.4028/www.scientific.net/amm.90-93.1010.

Full text

Abstract:

MR-TMD is a new type of semi-active control device which combines with Tuned Mass Damper (TMD) and a Magnetorheological (MR) Damper. Taking German ICE3 high-speed railway train through 32meters simply supported box girder bridge for example, a dynamical model of Train-Bridge coupling vibration system is established by considering track irregularities. The relations between the bridge vibration and track irregularities with dampers are studied and the effects of vibration control with TMD and MR-TMD on the bridge are comparatively analyzed. The results show that the effects of track irregularit

APA, Harvard, Vancouver, ISO, and other styles

41

Patil, Veeranagouda B., and Radhey Shyam Jangid. "OPTIMUM MULTIPLE TUNED MASS DAMPERS FOR THE WIND EXCITED BENCHMARK BUILDING / OPTIMALŪS MASĖS SLOPINTUVAI VĖJO VEIKIAMUOSE AUKŠTYBINIUOSE PASTATUOSE." Journal of Civil Engineering and Management 17, no. 4 (2011): 540–57. http://dx.doi.org/10.3846/13923730.2011.619325.

Full text

Abstract:

The performance of multiple tuned mass dampers (MTMD) installed at the top floor of the wind excited benchmark building under across wind loads is investigated. The performance of MTMD is compared with that of single tuned mass damper (TMD) having same total mass. The governing equations of motion of the building with MTMD/ TMD are solved by employing state space formulation. Initially, the TMD is installed at the top floor of the benchmark building and the optimum parameters of the damper for the minimization of various performance criteria of the building are obtained for different mass rati

APA, Harvard, Vancouver, ISO, and other styles

42

Wu, Qiong, Xilu Zhao, Shuai He, Wenxian Tang, and Rencheng Zheng. "A Bufferable Tuned-Mass Damper of an Offshore Platform against Stroke and Response Delay Problems under Earthquake Loads." Shock and Vibration 2016 (2016): 1–12. http://dx.doi.org/10.1155/2016/9702152.

Full text

Abstract:

A tuned-mass damper (TMD) is applied to ensure the safety and stability of an offshore platform in practice; however, damper stroke and response delay problems always result in intractable performances of vibration control while exposed to large earthquake loads. Therefore, this paper proposes a bufferable TMD, a passive TMD with buffers on both sides, to improve the performance of offshore platforms subjected to large seismic waves. A comprehensive simulation and experimental study was executed to investigate the dynamic performances of the bufferable TMD, by application of a 1 : 200-scale of

APA, Harvard, Vancouver, ISO, and other styles

43

Lin, Chi-Chang, Ging-Long Lin, and Kuo-Cheng Chiu. "Robust Design Strategy for Multiple Tuned Mass Dampers with Consideration of Frequency Bandwidth." International Journal of Structural Stability and Dynamics 17, no. 01 (2017): 1750002. http://dx.doi.org/10.1142/s021945541750002x.

Full text

Abstract:

The tuned mass damper (TMD) has been widely used in vibration control of civil engineering structures after numerous analytical studies and experimental verifications. A large number of TMDs have been implemented in real structures against natural and man-made excitations since the early 1970. From field observations, it was found that the control efficacy of a TMD may decay significantly when its frequency is not well tuned to the desired value. A multiple TMD (MTMD) system was proposed to tune a band of frequencies, thereby enhancing the vibration control efficiency. Frequency detuning usual

APA, Harvard, Vancouver, ISO, and other styles

44

Yang, Jing Bo, Zheng Qing Chen, and Xu Gang Hua. "Study on TMD Measure to Suppress Wind-Induced Vibration of Power Transmission Steel Tower." Applied Mechanics and Materials 684 (October 2014): 202–7. http://dx.doi.org/10.4028/www.scientific.net/amm.684.202.

Full text

Abstract:

Wind-induced vibration can affect the safety of power transmission tower. Vibration suppression of the high-rise tower is of concern in engineering. Vibration of the tower is mostly the first-order bending modal and this vibration can be suppressed by the tuned mass damper (TMD). This paper developed a TMD vibration damping device using eddy current damper constituted by magnetic steel installed in the vibration mass and fixed copper plate. It is characterized by simple structure and easy installation, and is suitable for wind-induced damage prevention of transmission tower. Focusing on a quad

APA, Harvard, Vancouver, ISO, and other styles

45

Cheng, Z. P., X. L. Qiao, and Z. B. Cheng. "Vibration Mitigation of Tunnel Structures via a Novel Passive Tuned Mass Damper." Journal of Physics: Conference Series 2185, no. 1 (2022): 012063. http://dx.doi.org/10.1088/1742-6596/2185/1/012063.

Full text

Abstract:

Abstract In this work, a novel passive tuned mass damper is introduced to mitigate the harmful vibrations in tunnel structures under moving trains/vehicles. First, a mechanism with inertial amplification effect is introduced. The transfer function of an SDOF system with the proposed inertial amplification system (SDOF-IAM) is presented. The adjustability of the proposed IAM is discussed. Second, replacing the SDOF by using the SDOF-IAM system, a novel passive tuned mass damper is proposed. Superior to the traditional TMD, the geometrical parameters of the present IAM-TMD can be changed to adju

APA, Harvard, Vancouver, ISO, and other styles

46

Jian, Xu, Zhang Tong-yi, Huang Wei, Hu Ming-yi, Qin Jing-wei, and Zu Xiao-chen. "Active control for machinery equipment induced structural vibration using H∞ criterion and PSO technique." Engineering review 39, no. 1 (2019): 21–28. http://dx.doi.org/10.30765/er.39.1.3.

Full text

Abstract:

In this paper, machinery equipment induced structural vibration was investigated and a composite system for structure and equipment was proposed. Tuned mass damper (TMD) and active tuned mass damper (ATMD) were respectively performed for vibration control, in addition, particle swarm optimization (PSO) was utilized for pursuing an optimal active control. Numerical results confirmed that the presented active control strategy could achieve a better vibration suppression compared to TMD control. The PSO based active control also gave inspiration for improving the traditional vibration control.

APA, Harvard, Vancouver, ISO, and other styles

47

Wang, Yanfeng, Chenghao Xu, Mengze Yu, and Zhicong Huang. "Lightweight Design of Vibration Control Devices for Offshore Substations Based on Inerters." Sustainability 16, no. 8 (2024): 3385. http://dx.doi.org/10.3390/su16083385.

Full text

Abstract:

Offshore substations are important sustainable power infrastructures subjected to strong vibrations induced by complex environmental excitations such as wind, waves, and currents. To protect the structures and expensive facilities, lightweight vibration control devices are highly desirable in offshore substations. With a high-performance energy dissipation device, the inerter, the conventional Tuned Mass Damper (TMD) is upgraded for lightweight vibration control. The optimal parametric design and performance evaluation of single- and double-tuned vibration control devices is performed based on

APA, Harvard, Vancouver, ISO, and other styles

48

Jin, Chungkuk, Sung-Jae Kim, and MooHyun Kim. "Optimization of Tuned Mass Damper for Submerged Floating Tunnel with Frequency-Domain Dynamics Simulation." Journal of Advances in Applied & Computational Mathematics 9 (October 20, 2022): 147–56. http://dx.doi.org/10.15377/2409-5761.2022.09.11.

Full text

Abstract:

In this study, the Tuned Mass Damper (TMD) optimization is carried out to reduce the resonant motion of Submerged Floating Tunnel (SFT) under wave excitations. The SFT dynamics is evaluated in frequency domain; a new approach to cost-effectively optimizing TMD parameters for a moored system is suggested. Discrete-Module-Beam (DMB) method is used to model the Tunnel; mooring lines are included as equivalent stiffness matrix through static-offset tests by the fully coupled model. Since the frequency-domain dynamics simulation model is employed, a significant reduction in optimization time can be

APA, Harvard, Vancouver, ISO, and other styles

49

Dirbas, Waleed, Hamza Diken, and Khalid Alnefaie. "The Effect of Tuned Mass Damper Mass Ratio on Wind Turbine Vibration Mitigation." Engineering, Technology & Applied Science Research 14, no. 6 (2024): 18388–94. https://doi.org/10.48084/etasr.9170.

Full text

Abstract:

This paper examines the efficacy of Tuned Mass Dampers (TMDs) in mitigating vibration in wind turbines under diverse excitation force conditions. The impact of TMD on the response of a wind turbine exposed to sinusoidal and random wind forces, at varying mass ratios μm: 0.02, 0.05, 0.10, and 0.20, was assessed through the use of a MATLAB SIMULINK model. The findings indicate that TMDs markedly attenuate vibration when subjected to sinusoidal forces, particularly at higher TMD mass ratios. In contrast, the reduction in vibration level in the presence of random wind forces is relatively modest,

APA, Harvard, Vancouver, ISO, and other styles

50

Cao, Fei, Michael Z. Q. Chen, and Yinlong Hu. "Seismic Isolation Performance Evaluation for a Class of Inerter-Based Low-Complexity Isolators." Shock and Vibration 2020 (October 22, 2020): 1–12. http://dx.doi.org/10.1155/2020/8837822.

Full text

Abstract:

In this paper, the seismic base isolation problem for all low-complexity networks containing one inerter, one spring, and one damper is studied based on a multi-degree-of-freedom model. The analytical solutions for the H2 performance optimization are derived, and the traditional tuned mass damper (TMD) is employed for comparison. Extensive numerical simulations are performed to verify the effectiveness of the obtained results. The results show that for different seismic wave excitations, some isolators are better than TMD in controlling the displacement of the main structure. Moreover, with th

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!