Academic literature on the topic 'Turbo pump unit'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Turbo pump unit.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Turbo pump unit"

1

Ivanov, A. I., and V. A. Borisov. "Oxygen-hidrogen liquid rocket engine using turbo-pump developed for aviation hidrogen liquid two-spool turbo-jet." VESTNIK of Samara University. Aerospace and Mechanical Engineering, no. 3-2(34) (April 18, 2014): 302–6. http://dx.doi.org/10.18287/2541-7533-2012-0-3-2(34)-302-306.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Belosludtsev, Viktor, Sergey Borovik, Valeriy Danilchenko, and Yuriy Sekisov. "Wear Diagnostics of the Thrust Bearing of NK-33 Turbo-Pump Unit on the Basis of Single-Coil Eddy Current Sensors." Sensors 21, no. 10 (2021): 3463. http://dx.doi.org/10.3390/s21103463.

Full text
Abstract:
The problem of early wear diagnostics of the combined journal-and-thrust bearing of the turbo-pump unit (TPU) of the liquid-propellant rocket engine NK-33 is considered. A feature of the problem is the significant restriction on modifications of the power plant’s design. The original solution based on replacing the standard induction sensors of the turbo-pump rotational speed currently used in TPU by single-coil eddy current sensors (SCECS) with sensitive elements in the form of a segment of a linear conductor is proposed. The SCECS provide the monitoring of the axial displacement of the shaft
APA, Harvard, Vancouver, ISO, and other styles
3

WAKUI, Shinji, Toshiya TANAKA, and Kan AKATSU. "Application of Turbo Molecular Pump Using Magnetic Bearing to Vibration Suppression Unit." Journal of the Japan Society for Precision Engineering, Contributed Papers 71, no. 9 (2005): 1184–88. http://dx.doi.org/10.2493/jspe.71.1184.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Borovik, Sergey Yu, Valeriy P. Danilchenko, Marina M. Kuteynikova, and Yuriy N. Sekisov. "The errors of the shaft's axial movement measuring in the single-coil-eddy-current-sensors-based system for the monitoring the state of radial thrust bearing of the NK-33 liquid rocket engine’s turbopump unit." Vestnik of Samara State Technical University. Technical Sciences Series 32, no. 1 (2024): 86–101. http://dx.doi.org/10.14498/tech.2024.1.6.

Full text
Abstract:
This article continues a series of publications devoted to the problems of early state diagnosis of the combined journal-and-thrust bearing of the turbo-pump unit of the liquid-propellant rocket engine NK-33, which is a critical node of the power plant under consideration. The proposed approach is based on the idea of replacing the standard induction sensors of the turbo-pump rotational speed currently used in turbo-pump unit by specially designed single-coil eddy current sensors with sensitive elements in the form of a segment of a linear conductor. The transducers are placed in the same moun
APA, Harvard, Vancouver, ISO, and other styles
5

Kostikov, Andrii O., Oleksandr L. Shubenko, Viktoriia O. Tarasova, Viktor A. Yakovliev, and Andrii O. Mazur. "Ways of TPP Power Units Modernization During Their Conversion to Ultra-Supercritical Steam Parameters." Journal of Mechanical Engineering 26, no. 4 (2023): 6–16. http://dx.doi.org/10.15407/pmach2023.04.006.

Full text
Abstract:
The approach to solving the applied problem of modernization of the 300 MW series power units produced by JSC "Ukrainian Energy Machines" by converting them from supercritical to ultra-supercritical steam parameters, provided that regenerative feed water heating system is preserved as much as possible, which will lead to an increase in the energy efficiency of the TPP with minimal conversion, is analyzed in the paper. The conversion of the K-300-240-2 power unit to the parameters of fresh steam 650 °C/30 MPa and intermediate superheated steam 650 °C/7 MPa, determined as optimal as a result of
APA, Harvard, Vancouver, ISO, and other styles
6

Aslanov, Asvar, Vladimir Raznoschikov, and Alexey Stol’nikov. "Studying parameters of aircraft cryogenic turbo-pump unit by the aircraft flight cycle." Vestnik Moskovskogo aviatsionnogo instituta 27, no. 4 (2020): 124–32. http://dx.doi.org/10.34759/vst-2020-4-124-132.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chiu, Hsin-Lin, and Nan-Chyuan Tsai. "Rotor speed control strategy to avoid resonance frequencies of turbo-molecular pump." Transactions of the Institute of Measurement and Control 40, no. 15 (2018): 4273–84. http://dx.doi.org/10.1177/0142331217744615.

Full text
Abstract:
A novel design of composite turbo-molecular pump (CTMP) is proposed. The major configuration of CTMP is composed by a coarse pump, a turbo-molecular pump (TMP) and a magnetic gear unit (MGU) capable of speed amplification. The modal analysis and the study on rotor/bearing dynamics are undertaken at first to estimate the resonance frequencies of the TMP blade rotor itself solely and the interactive dynamics of blade rotor/radial active magnetic bearing (BR/RAMB) subsystem. Secondly, an economical and efficient method by adjusting the angular acceleration speed of BR, namely RDPS, is proposed to
APA, Harvard, Vancouver, ISO, and other styles
8

Murakami, Y., T. Abe, H. Ohsawa, and S. Hata. "Development of turbo‐viscous pump with ceramic rotor assembly and oil‐free driving unit." Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 9, no. 3 (1991): 2053–57. http://dx.doi.org/10.1116/1.577454.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

WAKUI, Shinji, and Yu SASAKI. "Application of Turbo Molecular Pump Using 5-Axes Active Magnetic Bearing to Vibration Suppression Unit." Journal of the Japan Society for Precision Engineering 73, no. 7 (2007): 846–47. http://dx.doi.org/10.2493/jjspe.73.846.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Artyomovich, Mukolyants Arsen, Buranov Mardon Davronovich, Sotnikova Irina Vladimirovna, and Аzimova Munira Muminovna. "Analysis of the influence of the input parameters on the efficiency of the operation of the detander generator unit in the gas network system of the republic of Uzbekistan." E3S Web of Conferences 216 (2020): 01130. http://dx.doi.org/10.1051/e3sconf/202021601130.

Full text
Abstract:
The article is devoted to the generally recognized dilemma of using secondary energy resources in the transportation and distribution of natural gas. At stations where throttle devices are used, excessive gas pressure as the main component of secondary energy resources for technological processes is practically not used. Currently, the replacement of throttle devices with turbo-expander units is determined by energy and economic efficiency. This is due to the fact that the use of excess gas pressure in the turbo expander both at gas distribution stations and at compressor stations of gas pipel
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Turbo pump unit"

1

Пузанков, А. Н. "Предпосылки создания электродвигателей 6 кВ циркуляционных насосов с контролем изоляции". Thesis, Сумский государственный университет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/65577.

Full text
Abstract:
Как известно, электрические станции являются объектами повышенной важности, опасности. В связи с этим к работе электрооборудования предъявляются повышенные требования к надежности всего действующего оборудования, в частности циркуляционных насосов отдельных турбоагрегатов. В процессе эксплуатации, случаются ситуации, при которых необходимо в кратчайшие сроки измерить сопротивление изоляции двигателей циркуляционных насосов и на основании измерений дать разрешение персоналу турбинного цеха на пуск электродвигателя или введение его в АВР.
APA, Harvard, Vancouver, ISO, and other styles
2

Телевний, А. А. "Числовий розрахунок жорсткості підшипникових опор відцентрових машин з урахуванням податливості корпуса". Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/75837.

Full text
Abstract:
У роботі побудована тривимірна скінченноелементна модель підшипника кочення і проведена порівняльна характеристика різних контактних моделей при розрахунку жорсткості підшипникових опор турбонасоса із застосуванням як аналітичних залежностей, так і методів числового аналізу напружено-деформованого стану у програмному комплексі ANSYS.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Turbo pump unit"

1

Zubanov, Vasilii, Andrei Volkov, Valeriy Matveev, Grigorii Popov, and Oleg Baturin. "Optimization of Fuel Two-Stage Screw Centrifugal Pump of Rocket Powerful Turbopump Unit." In ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/gt2018-76400.

Full text
Abstract:
The article describes a refining method for a fuel pump of rocket powerful turbo-pump unit by the joint usage of mathematical optimization software IOSO, meshing complex NUMECA and CFD complex ANSYS CFX. The optimization software was used for automatic change of the geometry of low-pressure impeller, transition duct and high-pressure impeller to find the optimal design. It was mandatory to keep the original variant of the remaining parts of the pump. For this reason, only geometrical parameters of the blades were varied without changing the contours of the pump meridional flow part. The invest
APA, Harvard, Vancouver, ISO, and other styles
2

Demierre, Jonathan, Antonio Rubino, and Jürg Schiffmann. "Modeling and Experimental Investigation of an Oil-Free Micro Compressor-Turbine Unit for an ORC Driven Heat Pump." In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-25112.

Full text
Abstract:
Domestic heating and cooling will more and more have to rely on heat pumps in order to support a more rational use of primary energy consumption. The heat pump market is mainly dominated by electrically driven vapour compression cycles and by thermally driven sorption processes. The drawback of electrically driven vapour compression cycle is their dependence on an electrical grid and the fact that they increase the winter or summer electricity peak demands. Hence, a thermally driven vapour compression cycle would offer substantial advantages and flexibility to the end user for heating and cool
APA, Harvard, Vancouver, ISO, and other styles
3

Tolouee, Changiz. "Heat Exchanger Design and System Balance of an Air Source Heat Pump/Chiller Using Brazed Plate Heat Exchangers." In ASME 1997 Turbo Asia Conference. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/97-aa-030.

Full text
Abstract:
Air Source heat pump/chiller is used to provide chilled water for cooling and hot water for heating purposes. This is one investment for both applications with no requirement for boiler and fuel with the advantage of heat pump efficiency. In this paper we are going to analyse both air side and water side heat exchangers used in air source heat pump/chiller with special attention and emphasis on brazed plate heat exchanger which is used in refrigerant to water side of this unit in order to achieve optimum performance in both the heat pump and chiller operations. Due to compactness of brazed pla
APA, Harvard, Vancouver, ISO, and other styles
4

Stępczyńska, Katarzyna, Henryk Łukowicz, Sławomir Dykas, and Sebastian Rulik. "Thermo-Economic Analysis of the Ultra-Supercritical 900 MW Power Unit With the Various Configurations of the Auxiliary Steam Turbine." In ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/gt2012-68159.

Full text
Abstract:
Coal-based electric power generation remains the basic source of obtaining energy. With increasing pressure to reduce CO2 emissions, improving power unit efficiency has become an issue of utmost significance. The development of technologies related to coal-fired power units does not focus solely on the steam parameters ahead of the turbine. Increasing the live steam parameters usually constitutes the greatest contribution to the rise in the efficiency of a power unit, but the sum of efficiency gains related to the application of other solutions can also be significant and can, in some cases, e
APA, Harvard, Vancouver, ISO, and other styles
5

Lamprakis, Dimitrios, David John Rajendran, Mani Santhanakrishnan, et al. "On Leakage Flows in a Liquid Hydrogen Multi-Stage Pump for Aircraft Engine Applications." In ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2024. http://dx.doi.org/10.1115/gt2024-128734.

Full text
Abstract:
Abstract A comprehensive operational characterisation of a representative, Liquid Hydrogen (LH2) aircraft engine pump, a key enabler for future hydrogen aviation, is presented in this work. The implications of leakage flows are investigated in a 2-stage, high-pressure pump for a wide range of flow rates and rotational speeds, through 3D (U)RANS simulations. The study compares two configurations: a baseline model comprising the primary flow path components — inducers, impellers and volutes and a realisable pump hardware that includes hub, shroud and power unit cavities. Performance metrics, inc
APA, Harvard, Vancouver, ISO, and other styles
6

Branchini, L., M. Bianchi, N. Cavina, A. Cerofolini, A. De Pascale, and F. Melino. "Wind-Hydro-Gas Turbine Unit Commitment to Guarantee Firm Dispatchable Power." In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/gt2014-25049.

Full text
Abstract:
The randomness and intermittence of wind power require additional reserves provided by thermal generators. This creates difficult scheduling of generation, causing thermal generators to start up or shut down frequently, or to operate at low efficiency and high fuel consumption state. If not, some wind power will be curtailed and wasted. This paper examines the operation of a hybrid system made up of a wind farm, a pump storage hydro and conventional thermal generation units consisting in a combination of a heavy-duty and an aeroderivative gas turbines. In order to seek an optimal approach to d
APA, Harvard, Vancouver, ISO, and other styles
7

Arnulfi, Gianmario L., and Giulio Croce. "Compressed Air Energy Storage for a Small Size Standalone Plant Powered by a Solar Power Unit and a Gas Turbine." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-14631.

Full text
Abstract:
Abstract Energy storage can balance heat and power demand and production over different time scales, with both technical and economic benefit. Several devices have been proposed, but only two are really utilized: hydro-pumped storage, for large size plants, and electrochemical battery energy storage, for medium and small plants. Compressed Air Energy Storage (CAES) was proposed as an alternative, and two well-known plants, Hunthorf (Germany) and Mac Intosh (United States) have been successfully working for many years. However, due to the huge capital costs, this concept never became widely pop
APA, Harvard, Vancouver, ISO, and other styles
8

Xin, Xiaopeng, Yongfeng Sui, Hanzhong Mao, Peng Chu, Jianqiang Kong, and Zhong Ye. "Development and Application of Low Pressure Stages for Large Flow and High Speed Unit." In ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/gt2015-42135.

Full text
Abstract:
New low pressure stages with twisted long blades were developed for 1000MW boiler feed water pump turbine (BFPT) of full capacity. The development process includes both CFD design and CAE design. Compared with half capacity, full capacity BFPT is now facing great market requirements. The difficulty lies in large flow of 100t/h and high speed of 5200rpm, which demands good strength and aerodynamic performance. The static stress and dynamic stress should be checked comprehensively. Air bending stresses of the twisted blades were calculated by three different methods. The fluid-solid coupling met
APA, Harvard, Vancouver, ISO, and other styles
9

Gokaltun, Seckin, Bruce R. Fabijonas, Louis S. Krajewski, and Richard C. Rodzwic. "A Self-Sufficient Oil Cooling Mechanism for Fluid-Film Bearing Applications in Remote Operations." In ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-83145.

Full text
Abstract:
Abstract The Kingsbury CH Bearing System is a self-contained bearing solution that utilizes a viscosity pump to supply lubrication to individual bearings. The system consists of a CH unit that houses a journal bearing and a double thrust bearing assembly as well as an oil reservoir and internal oil channels and a C unit which houses a second journal bearing. The names ‘CH’ and ‘C’ are historical. An external piping loop connecting the CH and C units lubricates the C journal bearing. Another external piping loop connects the oil reservoir in the CH unit to an external cooling system which cools
APA, Harvard, Vancouver, ISO, and other styles
10

Schwamm, Friedrich. "Advanced Fuel Metering for Aero Engines." In ASME Turbo Expo 2000: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/2000-gt-0041.

Full text
Abstract:
Traditionally the fuel system of most modern day aero engines consist of two basic functional blocks; - pumping system - fuel metering system. The pumping system basically consists of a first stage centrifugal pump followed by a second stage gear pump. The function of the pumping system is to provide sufficient fuel at the required pressure to ensure engine operation (steady state and transient) over the complete operating envelope and under the consideration of worst case fuel inlet properties. The fuel metering system basically consists of a fuel metering valve, an emergency valve and a shut
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!