Log in

Relevant bibliographies by topics / Turbo-unit

Contents

Journal articles
Dissertations / Theses
Book chapters
Conference papers

Academic literature on the topic 'Turbo-unit'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Turbo-unit.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Turbo-unit"

1

Nelson, C. J., L. Stankovic, and B. Honary. "Partial unit memory-based turbo codes." Electronics Letters 45, no. 21 (2009): 1081. http://dx.doi.org/10.1049/el.2009.1699.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bernard, Akindade Adaramola. "A Systematic Approach of Turbo Generators Performance Evaluation Maintenance for Continuous Power Generation." J. of Advancement in Engineering and Technology 7, no. 4 (2020): 05. https://doi.org/10.5281/zenodo.3794868.

Full text

Abstract:

Electricity demand in Nigeria far outstrips the supply which is epileptic in nature. The research presents to a systematic approach for maintenance of turbo generators to reduce power outages for continuous generation of electricity. Energy generated (MWH) is the summation of hourly MW generation on the turbo units multiplied by the number of hours the units are in operation. This is usually indicated on an energy integrator dependent on Unit Availblity (UA).  UA is the ratio of the number of hours a unit is available for operation to the number of hours in the period considered. Plant ev

APA, Harvard, Vancouver, ISO, and other styles

3

Isakov, Andrei N., Andrei V. Andrusich, and Igor E. Savraev. "Device for Reduction Sparking of Slip Ring of Turbo Generator." Environment. Technology. Resources. Proceedings of the International Scientific and Practical Conference 2 (August 8, 2015): 116. http://dx.doi.org/10.17770/etr2013vol2.851.

Full text

Abstract:

Most modern power plants generating electric power equipped with synchronous generators. The correct operation of energy economy depends on reliability of such electrical machines. In this article issue of increasing reliability of turbo generator by increasing reliability of its brush contact unit is considered. Description of brush contact unit and its possible damages is given. Equivalent electrical circuit of contact layer of brush contact unit is performed. The equations are formed and the dynamical simulation model consisting of electric source and two brush contact units is created. Wit

APA, Harvard, Vancouver, ISO, and other styles

4

Jose A, Liji, and Sethu Raj. "Low Complexity Turbo Decoder with ACS Unit." International Journal of Engineering Trends and Technology 36, no. 8 (2016): 446–51. http://dx.doi.org/10.14445/22315381/ijett-v36p280.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Nardón, Gustavo F., Guido F. Botta, Kojo A. Aikins, David Rivero, Fernando Bienvenido, and Diogenes L. Antille. "Seeding System Configuration Effects on Sunflower Seedling Emergence and Yield under No-Tillage." Soil Systems 5, no. 4 (2021): 72. http://dx.doi.org/10.3390/soilsystems5040072.

Full text

Abstract:

No-tillage farming can improve crop productivity and the reliability of cropping compared with conventional tillage. The effects of three different seeding system configurations on surface residue handling, sunflower emergence and stand establishment, yield, and gross income were investigated over three cropping seasons. The seeding system configurations comprised of (1) turbo coulter blade, (2) notched disc row cleaner before turbo coulter blade, and (3) no residue handling unit installed in front of a double-disc opener. For all three seeding system configurations, crop residue cover on sown

APA, Harvard, Vancouver, ISO, and other styles

6

Lindberg, Mark B. "Fisher: A turbo pascal unit for optimal partitions." Computers & Geosciences 16, no. 5 (1990): 717–32. http://dx.doi.org/10.1016/0098-3004(90)90029-s.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Yang, Yarang, and Yunpeng Li. "Research and Implementation of Turbo Coding Technology in High-Speed Underwater Acoustic OFDM Communication." Journal of Robotics 2022 (March 15, 2022): 1–11. http://dx.doi.org/10.1155/2022/2576303.

Full text

Abstract:

It is demonstrated that the fully parallel turbo decoding algorithm can achieve an approximate error correction decoding performance when 36 iterations are used and when the log-map algorithm with 6 iterations is used. By comparison, it is shown that it can achieve much higher decoding rates than the log-map algorithm for various frame lengths of LTE standard turbo codes at the cost of higher hardware resource requirements. According to the fully parallel turbo decoding algorithm, this paper proposes a scheme for implementing a fully parallel turbo decoder on FPGA, detailing the overall struct

APA, Harvard, Vancouver, ISO, and other styles

8

Ferone, E., A. Pierallini, M. Bonamini, et al. "Utilità delle sequenze turbo-flair e analisi volumetrica della regione ippocampale nella valutazione del paziente con epilessia temporale farmaco-resistente." Rivista di Neuroradiologia 10, no. 2_suppl (1997): 54–56. http://dx.doi.org/10.1177/19714009970100s220.

Full text

Abstract:

The aim of this study was to evaluate the hippocampal region using Fluid Attenuation Inversion Recovery sequences (Turbo-FLAIR) to detect signal intensity abnormalities, and volumetric sequences to detect cortical thickness changes, in patients with drug-resistant temporal epilepsy. We evaluated 30 patients with drug-resistant temporal epilepsy with a 1.5 Tesla unit (NT 15 Philips Gyroscan). Conventional SE, Turbo SE, IR, Turbo-FLAIR, volumetric 3D sequences on coronal plane, PD, T2weighted SE sequences on axial plane, T1-weighted SE on sagittal plane / were performed. Signal intensity and vol

APA, Harvard, Vancouver, ISO, and other styles

9

Gao, Jin Shui, and Guo Biao Gu. "Research on Taylor Vortices in the Wedge-Shaped Air Gap of Evaporation Cooling Turbo Generator." Applied Mechanics and Materials 187 (June 2012): 103–8. http://dx.doi.org/10.4028/www.scientific.net/amm.187.103.

Full text

Abstract:

Cooling technique is one of the most important parts to improve the development of turbo generator. Turbo generator with evaporative cooling stator and water cooling rotor possesses many excellent qualities for mid unit. In this system the stator bars and core are immerged in evaporative coolant, which could be cooled fully. The rotor bars are cooled by water inner cooling mode. In this paper, we describe the Taylor Vortices in the Wedge-shaped air gap of Evaporation cooling Turbo Generator and present the research on gas-flow and heat-transfer with different features in the turbo generator. T

APA, Harvard, Vancouver, ISO, and other styles

10

Ma, Lyuzhou. "Troubleshooting of a 330MW turbo generator unit during commissioning." Journal of Physics: Conference Series 1748 (January 2021): 052051. http://dx.doi.org/10.1088/1742-6596/1748/5/052051.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Turbo-unit"

1

Fagoonee, Lina. "A multi-functional turbo receiver based on partial unit memory codes." Thesis, Lancaster University, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.418684.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Janse, van Rensburg Jacobus. "Thrust load determination for the high pressure turbo unit of the pebble bed micro model / Jacobus Janse van Rensburg." Thesis, North-West University, 2006. http://hdl.handle.net/10394/1087.

Full text

Abstract:

Commercial turbochargers used on earth-moving equipment, were used as the turbo machinery for the Pebble Bed Micro Model (PBMM) instead of custom-built turbo units. A premature thrust bearing failure occurred on the High Pressure Turbo Unit (HPTU) of the PBMM during a test. Due to the closed Brayton cycle operation of the PBMM, it might have been possible to exert larger thrust loads on the thrust bearing of the HPTU than normally present in the turbo diesel engine application. A detailed study was performed on theoretical thrust calculations as applied to turbo machinery. In the literature st

APA, Harvard, Vancouver, ISO, and other styles

3

Пузанков, А. Н. "Предпосылки создания электродвигателей 6 кВ циркуляционных насосов с контролем изоляции". Thesis, Сумский государственный университет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/65577.

Full text

Abstract:

Как известно, электрические станции являются объектами повышенной важности, опасности. В связи с этим к работе электрооборудования предъявляются повышенные требования к надежности всего действующего оборудования, в частности циркуляционных насосов отдельных турбоагрегатов. В процессе эксплуатации, случаются ситуации, при которых необходимо в кратчайшие сроки измерить сопротивление изоляции двигателей циркуляционных насосов и на основании измерений дать разрешение персоналу турбинного цеха на пуск электродвигателя или введение его в АВР.

APA, Harvard, Vancouver, ISO, and other styles

4

Wegener, John A., Robert N. Zettwoch, and Michael C. Roche. "THE EVALUATION AND INTEGRATION OF AN INSTRUMENTATION AND TELEMETRY SYSTEM WITH SOQPSK MODULATION AND CONTROL INTEGRATED WITH AVIONICS DISPLAYS." International Foundation for Telemetering, 2007. http://hdl.handle.net/10150/604501.

Full text

Abstract:

ITC/USA 2007 Conference Proceedings / The Forty-Third Annual International Telemetering Conference and Technical Exhibition / October 22-25, 2007 / Riviera Hotel & Convention Center, Las Vegas, Nevada<br>This paper describes the integration activities associated with the instrumentation and telemetry system developed for an F/A-18 Hornet Flight Test program, including bench integration, avionics integration, and aircraft ground and flight checkout. The system is controlled by a Boeing Integrated Defense System (IDS) Flight Test Instrumentation designed Instrumentation Control Unit (ICU), which

APA, Harvard, Vancouver, ISO, and other styles

5

Šroba, Roman. "Rekuperace energie ze spalin naftového motoru užitkového vozidla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417420.

Full text

Abstract:

The scope of this thesis investigates value added by a turbocharger with an associated motor-generator unit to a diesel engine used by a commercial vehicle. A thermodynamic model of the engine was prepared in GT-SUITE software. Case studies were primary focused on a reduction of specific fuel consumption as well as a nitrogen oxides production using an energy recuperation of exhaust gas. Furthermore, there are described potential benefits of using an electric assistance in order to increase an exhaust gas temperature during a steady state engine operation. Additionally, there is an investigati

APA, Harvard, Vancouver, ISO, and other styles

6

Wegener, John A., and Michael C. Roche. "THE DESIGN OF A 21st CENTURY TELEMTRY SYSTEM WITH SOQPSK MODULATION AND INTEGRATED CONTROL." International Foundation for Telemetering, 2005. http://hdl.handle.net/10150/604875.

Full text

Abstract:

ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada<br>This paper describes a telemetry system developed for the EA-18G Flight Test program. The program requires transmission of a number of data streams, in IRIG-106 Chapter 4 PCM, Chapter 8 Mux-All 1553, Ethernet, and Fibre Channel formats. The initial requested data rate was in excess of 30 Mbits/sec. The telemetry system must operate at a range up to about 120 miles, at several test ranges,

APA, Harvard, Vancouver, ISO, and other styles

7

Орлов, Р. О. "Удосконалення технологічного процесу виготовлення півмуфти зубчастої 97.05020002 турбокомпресорного агрегата ТКА-Ц-16/120 шляхом структурно-параметричної оптимізації операції технічного контролю". Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/76176.

Full text

Abstract:

Записка: 101 с., 28 рис., 21 табл., 17 джерел. Півмуфта зубчаста входить до складу турбокомпресорного агрегату ТКА–Ц–16/120. Турбокомпресорний агрегат ТКА–Ц–16/120, (в подальшому іменується «агрегат»), призначений для стиснення нафтових газів у складі газліфтної компресорної станції КС–ЦГТЦ / 0,6–12. Розвиток машинобудування тісно пов'язаний з виготовленням компресорних агрегатів, у зв’язку з цим актуальним є вдосконалення технологій обробки їх окремих деталей та складання машин. Завдяки розвитку цієї галузі, якість та продуктивність багатьох інших галузей зросла в декілька раз, що дозво

APA, Harvard, Vancouver, ISO, and other styles

8

Телевний, А. А. "Числовий розрахунок жорсткості підшипникових опор відцентрових машин з урахуванням податливості корпуса". Master's thesis, Сумський державний університет, 2019. http://essuir.sumdu.edu.ua/handle/123456789/75837.

Full text

Abstract:

У роботі побудована тривимірна скінченноелементна модель підшипника кочення і проведена порівняльна характеристика різних контактних моделей при розрахунку жорсткості підшипникових опор турбонасоса із застосуванням як аналітичних залежностей, так і методів числового аналізу напружено-деформованого стану у програмному комплексі ANSYS.

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Turbo-unit"

1

Fagoonee, L., and B. Honary. "A Multifunctional Turbo-Based Receiver Using Partial Unit Memory Codes." In Cryptography and Coding. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-540-40974-8_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Nistor, Ionel, Philippe Voinis, Mohamed-Amine Hassini, Romain Lacombe, and Paolo Pennacchi. "Application of a Model-Based Method for Balancing a Large Steam Turbo-Generator Unit." In Proceedings of the 9th IFToMM International Conference on Rotor Dynamics. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-06590-8_60.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Li, Guoqing, Lei Hu, Pan Qin, et al. "Dynamic Simulation and Effect Analysis of Power Load Unbalance Protection for the Turbo-Generator Unit." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-1447-6_52.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Liebetrau, Anton. "Die Unit Mouse." In Turbo Pascal 5.0/5.5 Units und Utilities. Vieweg+Teubner Verlag, 1989. http://dx.doi.org/10.1007/978-3-322-83678-6_1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Liebetrau, Anton. "Die Unit Special." In Turbo Pascal 5.0/5.5 Units und Utilities. Vieweg+Teubner Verlag, 1989. http://dx.doi.org/10.1007/978-3-322-83678-6_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Liebetrau, Anton. "Die Unit Spell." In Turbo Pascal 5.0/5.5 Units und Utilities. Vieweg+Teubner Verlag, 1989. http://dx.doi.org/10.1007/978-3-322-83678-6_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Liebetrau, Anton. "Die Unit Standard." In Turbo Pascal 5.0/5.5 Units und Utilities. Vieweg+Teubner Verlag, 1989. http://dx.doi.org/10.1007/978-3-322-83678-6_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Liebetrau, Anton. "Die Unit Sys." In Turbo Pascal 5.0/5.5 Units und Utilities. Vieweg+Teubner Verlag, 1989. http://dx.doi.org/10.1007/978-3-322-83678-6_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Liebetrau, Anton. "Die Unit Txt." In Turbo Pascal 5.0/5.5 Units und Utilities. Vieweg+Teubner Verlag, 1989. http://dx.doi.org/10.1007/978-3-322-83678-6_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Liebetrau, Anton. "Die Unit Win." In Turbo Pascal 5.0/5.5 Units und Utilities. Vieweg+Teubner Verlag, 1989. http://dx.doi.org/10.1007/978-3-322-83678-6_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Turbo-unit"

1

Cheng, Xiang, Fan Sang, Yizhuo Zhai, Xiaokuan Zhang, and Taesoo Kim. "Rug: Turbo Llm for Rust Unit Test Generation." In 2025 IEEE/ACM 47th International Conference on Software Engineering (ICSE). IEEE, 2025. https://doi.org/10.1109/icse55347.2025.00097.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Varuolo, Christopher, Huascar Ascarrunz, Justin Lanfranchi, Jordan M. Jones, and Thomas McClelland. "Development Status and Performance of the Timing Unit Rubidium Oscillator (TURbO) As a Compact High Performance, Low SWaP Atomic Clock." In 2024 IEEE Ultrasonics, Ferroelectrics, and Frequency Control Joint Symposium (UFFC-JS). IEEE, 2024. https://doi.org/10.1109/uffc-js60046.2024.10793573.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Varuolo, Christopher, Huascar Ascarrunz, Jordan M. Jones, Justin Lanfranchi, and Thomas McClelland. "Development and Performance of the Timing Unit Rubidium Oscillator (TURbO) as a Compact, High Performance Atomic Clock for Dynamic Environments." In 56th Annual Precise Time and Time Interval Systems and Applications Meeting. Institute of Navigation, 2025. https://doi.org/10.33012/2025.19946.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hou, Rongtao, Jinyu Zhou, Biao Zhou, and Bingcheng Wang. "Extract and Explore Chaos Characters of an Abnormal Turbo-Unit." In 2010 International Conference on Measuring Technology and Mechatronics Automation (ICMTMA 2010). IEEE, 2010. http://dx.doi.org/10.1109/icmtma.2010.91.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Liu, Sheng, Baoling Zhao, Gang Liu, and Ling Wu. "The model predictive control of turbo charging unit of pressurized marine boiler." In 2016 35th Chinese Control Conference (CCC). IEEE, 2016. http://dx.doi.org/10.1109/chicc.2016.7554033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Krasnikov, Sergey, Andrii Rogovyi, Iryna Hrechka, Lyidmila Kiurcheva, and Ivan Chyzhykov. "Study of the turbo unit vibration characteristics dependence on the support rigidity." In MODERN AUTOMOTIVE INDUSTRY, TRANSPORT AND ROAD INFRASTRUCTURE '2024 (MAITRI2024). AIP Publishing, 2025. https://doi.org/10.1063/12.0038601.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Baxi, C. B., A. Telengator, J. Razvi, S. E. Belov, and N. G. Kokochigov. "Development of the GT-MHR Turbo Machine." In ASME Turbo Expo 2009: Power for Land, Sea, and Air. ASMEDC, 2009. http://dx.doi.org/10.1115/gt2009-59454.

Full text

Abstract:

The high-temperature gas-cooled reactor technology is the only nuclear technology capable of achieving coolant temperatures as high as 950 °C and at the same time ensuring safe and efficient production of electricity, process steam and hydrogen. GA in USA and OKBM in Russia started an independent research in this area in the 1990s. In 1995, OKBM in cooperation with GA started development of the GT-MHR design which combines a safe modular reactor and a power conversion unit based on the high-efficiency Brayton cycle. The power conversion unit in the GT-MHR design has integral configuration, wit

APA, Harvard, Vancouver, ISO, and other styles

8

Cleveland, A. "Turbo Expanders for Energy Recovery; Design and Installation of a 250 Kw Unit." In ASME 1988 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1988. http://dx.doi.org/10.1115/88-gt-266.

Full text

Abstract:

Turbo expanders have been used in a number of installations to generate electricity from the energy available in the process of pressure reduction. The turbo expander replaces the regulating valve and duplicates the functions of the valve, controlling pressure and flow while at the same time generating electricity.

APA, Harvard, Vancouver, ISO, and other styles

9

Pennacchi, Paolo, Andrea Vania, Steven Chatterton, et al. "Unbalance Identification in Large Steam Turbo-Generator Unit Using a Model-Based Method." In ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/detc2013-13238.

Full text

Abstract:

Fault identification in industrial machine is a topic of major importance under engineering point of view. In fact, the possibility to identify not only the type, but also the severity and the position of a fault occurred along a shaft-line allows quick maintenance and shorten the downtime. This is really important in the power generation industry where the units are often of several tenths of meters long and where the rotors are enclosed by heavy and pressure-sealed casings. In this paper, an industrial experimental case is presented related to the identification of the unbalance on a large s

APA, Harvard, Vancouver, ISO, and other styles

10

Tari, M., L. Yoshida, S. Sekito, R. Brutsch, J. Allison, and A. Lutz. "HTC insulation technology drives rapid progress of indirect-cooled turbo generator unit capacity." In Proceedings of Power Engineering Society Summer Meeting. IEEE, 2001. http://dx.doi.org/10.1109/pess.2001.970285.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!