Relevant bibliographies by topics / Turning lather

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Turning lather'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Turning lather.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Turning lather"

1

Hira, Jaspreet, Alakesh Manna, Binit Kumar Jha, Rohit Sharma, Anup Malik, and Deepak Bhutani. "The effect on the tool flank wear width VBmax during turning of Hybrid Mg/(8wt% SiC(p) +2wt% Al2O3(p) +1wt% Gr(p) MMC using PVD coated cermet tool." IOP Conference Series: Materials Science and Engineering 1225, no. 1 (2022): 012006. http://dx.doi.org/10.1088/1757-899x/1225/1/012006.

Full text
Abstract:
Abstract In this study Taguchi Optimization Technique was used, followed by ANOVA to evaluate the machinability i.e. turning of a hybrid Mg/(8wt%SiCp+2wt%Al2O3p+1wt%Grp) MMC using PVD coated cermet tool under the dry turning conditions. Several experiments were conducted using the L27 (313) orthogonal array on NH26 automated lather machine. ANOVA was used to determine the impression of the turning parameter on the VBmax of the tool flank. The finding of the research work investigated that the cutting speed in the dominant factor influence the tool wear width. The confirmation test revealed tha
APA, Harvard, Vancouver, ISO, and other styles
2

Davies, Peter Spencer, George Dalgleish, and David Lamb. "The early evolution of the tappit hen." Proceedings of the Society of Antiquaries of Scotland 141 (November 30, 2012): 279–92. http://dx.doi.org/10.9750/psas.141.279.292.

Full text
Abstract:
The recent discovery of three pewter tappit hen measures from the excavation of a ship sunk off Mull in 1653 has enabled us to deduce something of the origins of this eponymous Scottish measure. They are of Scots pint, chopin and half-mutchkin capacity, and they display several hitherto unrecognised features. They were made by casting two vertical halves, unlike the familiar 18th-century forms. This left a hole in the base which was then filled with a plug. On the inside of this plug the pewterer struck a mark of a hammer and his initials, whilst his touchmark was struck on the collar of the m
APA, Harvard, Vancouver, ISO, and other styles
3

Jiang, Long, Jianxi Yao, and Zuyuan Liu. "Analysis of the Accuracy of a Body-Force Propeller Model and a Discretized Propeller Model in RANS Simulations of the Flow Around a Maneuvering Ship." Journal of Marine Science and Engineering 13, no. 4 (2025): 788. https://doi.org/10.3390/jmse13040788.

Full text
Abstract:
Currently, the RANS (Reynolds-Averaged Navier–Stokes) method is widely recognized as a prevalent approach for computing ship maneuvering forces and moments. Obtaining hydrodynamic derivatives using pure RANS is time-consuming, especially with rotating propellers. A reasonable simplification of the propeller is usually necessary to improve simulation efficiency. The ITTC suggests both the discretized propeller model (DPM) and the body-force model (BFM) for RANS simulations. While BFM offers computational efficiency, it may not accurately represent large-amplitude ship maneuvers. It is quite sig
APA, Harvard, Vancouver, ISO, and other styles
4

ALYEHYA, ALI. "Vertical Turning Lathe versus Horizontal Turning Lathe A Comparative Analysis." International Journal of Engineering Research and Applications 14, no. 9 (2024): 81–86. http://dx.doi.org/10.9790/9622-14098186.

Full text
Abstract:
The subtractive manufacturing process had been one of the early processes known in the industry field. One of which is turning operation. This type of operation is based on removing or carving-off material from a stock piece with a sharp cutting tool while the stock piece is revolving. A horizontal turning lathe (HTL) and a vertical turning lathe (VTL) are two types categorized according to the mounting direction of the work piece and the machine’s revolving axis. This research will bring up to surface the advantages and disadvantages of these two main processes and their applications in the i
APA, Harvard, Vancouver, ISO, and other styles
5

Безъязычный, Вячеслав, Vyacheslav Bezyazychnyy, Александр Чукарин, et al. "Sliding block vibrations when turning." Science intensive technologies in mechanical engineering 2018, no. 11 (2018): 3–8. http://dx.doi.org/10.30987/article_5bd8ab4233c8d4.32366481.

Full text
Abstract:
Computation dependences on the definition of vibration amplitude in machine sliding blocks of a lathe group, in particular, sliding blocks of boring lathes of VM series, feed through cutters and boring ones are defined. Vibration speeds of oscillations in the direction of coordinate axes with the aid of which one defines actually amplitudes of deformations are defined. As a result of investigations there are determined dependences to obtain amplitudes of deformations, mean-square values of oscillation speeds affecting errors at parts machining on boring lathes.
APA, Harvard, Vancouver, ISO, and other styles
6

Kuljanić, E. "Face Turning on CNC Lathe." CIRP Annals 40, no. 1 (1991): 53–56. http://dx.doi.org/10.1016/s0007-8506(07)61932-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

CHIBA, Masanobu, Hiroyuki SASAGAWA, and Noboru SUGIMOTO. "Development Safety Simulator for Lathe Turning." Journal of JSEE 64, no. 6 (2016): 6_93–6_98. http://dx.doi.org/10.4307/jsee.64.6_93.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jafri, Muhamad. "EFFECT OF SPINDLE ROTATION IN TURNING HIGH CARBON STEEL USING HSS LATHE BLADES ON SURFACE ROUGHNESS AND INTEGRITY OF LATHE BLADES." T R A K SI 23, no. 1 (2023): 75. https://doi.org/10.26714/traksi.23.1.2023.75-86.

Full text
Abstract:
This experiment aims to determine the effect of spindle rotation on medium carbon steel turning using an HSS knife, the roughness of the object and the integrity of the blade. In the field of machining, the surface quality of an object can be influenced by several factors such as cutting speed, cutting speed, cutting angle, depth of cut and the material used in the turning process. A good lathe knife must have certain properties, so that later it can produce products with good quality (right size) and economical (short time required). The spindle lathe speed set by the workshop technician for
APA, Harvard, Vancouver, ISO, and other styles
9

YONEYAMA, Takeshi, and Zinan LU. "Trial Construction of Micro Lathe Turning System." Journal of the Japan Society for Precision Engineering 64, no. 4 (1998): 598–602. http://dx.doi.org/10.2493/jjspe.64.598.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Petrakov, Yuriy Volodymyrovych, and John Maru Ezenduka. "Simulating turning cycles on CNC lathe machines." Mechanics and Advanced Technologies 6, no. 1 (2022): 7–13. http://dx.doi.org/10.20535/2521-1943.2022.6.1.251910.

Full text
Abstract:
It is shown that the turning of the contour shaped surfaces of parts is mainly carried out according to the cycles of rough turning G71, G72, G73 with a finishing pass according to the cycle G70. In any case, the cutting process is quasi-stationary, which determines the need to control the cutting mode to stabilize and optimize the process. It is proposed to use a special program for designing the control program of a CNC machine tool, which, based on a priori information about the technological machining system, performs the simulation of the process. During simulation, in the process of solv
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Turning lather"

1

Bothner, Rose. "An optimization model for selecting the economical cutting parameters in an external forward turning operation /." Online version of thesis, 1990. http://hdl.handle.net/1850/10592.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Молчанов, I. O. "Удосконалення технологічного процесу виготовлення штока 127.15.133.06.03 шляхом забезпечення жорсткості деталі при високошвидкісній токарній обробці". Master's thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/72385.

Full text
Abstract:
Питання підвищення точності, якості обробки та продуктивності завжди залишаються актуальними для машинобудування. Удосконалення розрахунків на міцність, призводить до все більшого випуску високоточних деталей недостатньої жорсткості, одним із видів яких є штоки та вали з відношенням довжини до діаметра більше 10, отже дослідження токарної обробки деталі шток являє собою актуальну наукову і практичну задачі. Метою дослідження є удосконалення технологічного процесу виготовлення штока 127.15.133.06.03 шляхом забезпечення жорсткості деталі при високошвидкісній токарній обробці. Об'єкт дослідженн
APA, Harvard, Vancouver, ISO, and other styles
3

Song, Sukhan. "Intelligent machining control for turning process /." Digital version accessible at:, 1998. http://wwwlib.umi.com/cr/utexas/main.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhou, Li. "Machining chip breaking prediction with grooved inserts in steel turning." Link to electronic thesis, 2001. http://www.wpi.edu/Pubs/ETD/Available/etd-0109102-140803.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Collingwood, M. C. "A study of the collision problem in multi-axis NC turning." Thesis, Coventry University, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383500.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rybář, Pavel. "Konstrukce malého svislého soustruhu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229672.

Full text
Abstract:
Task of this project is design of small vertical lathe. First part is focused on theory of turning technology, sort of lathe types, overview of vertical lathes including description of componets which vertical lathes consist of. At the second part of this project there is performed a propose of the machined part and a propose of cutting machine. The last part of this project provides base structure calculations and analysis needed for design proposal of a small vertical lathe according to specified parametres.
APA, Harvard, Vancouver, ISO, and other styles
7

Park, Jong-Suh. "The Prediction of Chatter Stability in Hard Turning." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/5235.

Full text
Abstract:
Despite a large demand from industry, a realistic chatter modeling for hard turning has not been available due to the complexity of the problem, which is mainly caused by flank wear and nonlinearity in hard turning. This thesis attempts to develop chatter models for predicting chatter stability conditions in hard turning with the considerations of the effects of flank wear and nonlinearity. First, a linear model is developed by introducing non-uniform load distribution on a tool tip to account for the flank wear effect. Second, a nonlinear model is developed by further incorporating nonlineari
APA, Harvard, Vancouver, ISO, and other styles
8

Bell, David Dale. "A predictive model for the concentration of cutting fluid that escapes the cutting zone when turning a circular cylinder on a lathe." Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/19086.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Nayfeh, Taysir H. "A direct on-line ultrasonic sensing method to determine tool and process conditions during turning operations." Diss., This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-06062008-165721/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhou, Li. "Machining chip-breaking prediction with grooved inserts in steel turning." Link to electronic thesis, 2002. http://www.wpi.edu/Pubs/ETD/Available/etd-0109102-140803.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Turning lather"

1

Raffan, Richard. Turning wood with Richard Raffan. 3rd ed. Taunton Press, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Raffan, Richard. Turning wood with Richard Raffan. 3rd ed. Taunton Press, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Fenner, David. Mini-lathe for home machinists. Fox Chapel Pub., 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Conover, Ernie. The lathe book: A complete guide for the wood craftsman. Taunton Press, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Conover, Ernie. The frugal woodturner. Fox Chapel, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Volker, Benad-Wagenhoff, Hergesell Burkhard, Zweckbronner Gerhard, and Landesmuseum für Technik und Arbeit in Mannheim., eds. Der richtige Dreh?: Industrielle Facharbeit im Wandel, 31.1.1996-1.5.1996 : Begleitheft zur Sonderausstellung. Das Landesmuseum, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mortimer, Stuart. Techniques of spiral work: A practical guide to the craft of making twists by hand. Stobart Davies, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

1898-, Leggat John, and Ogden Warren Greene 1906-, eds. A bibliography of the art of turning and lathe and machine tool history with additional references to books and periodical articles which are of interest in relation to these subjects. 3rd ed. Museum of Ornamental Turning, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Board, Engineering Industry Training, ed. Turning. Engineering Industry Training Board, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sobolʹ, A. M. Puti povyshenii͡a︡ proizvoditelʹnosti truda stanochnikov: Na primere tokareĭ. "Vysshai͡a︡ shkola", 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Turning lather"

1

Kanife, Paul Obiora. "CNC Area Lathe Turning." In Computer Aided Virtual Manufacturing Using Creo Parametric. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-23359-8_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Smith, Kirstin. "Turning the wheel." In Stunts of Late Nineteenth-Century New York. Routledge, 2019. http://dx.doi.org/10.4324/9780429031007-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kanife, Paul Obiora. "Area Lathe Turning, Drilling, Boring and Volume Milling." In Computer Aided Virtual Manufacturing Using Creo Parametric. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-23359-8_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Jørgensen, Christian K. "Jannik Bjerrum's Later Life—Turning Toward Chemical Physics." In ACS Symposium Series. American Chemical Society, 1994. http://dx.doi.org/10.1021/bk-1994-0565.ch009.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Aughterson, Kate. "Turning Points: Tragedy and Comedy." In Shakespeare: The Late Plays. Macmillan Education UK, 2013. http://dx.doi.org/10.1007/978-1-137-37564-3_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ingham, Bob, and Paul Smith. "Prelims - How to Make a Treadle-Operated Wood-Turning Lathe." In How to Make a Treadle-Operated Wood-Turning Lathe. Practical Action Publishing, 1986. http://dx.doi.org/10.3362/9781780442419.000.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Ingham, Bob, and Paul Smith. "1. How to Make a Treadle-Operated Wood-Turning Lathe." In How to Make a Treadle-Operated Wood-Turning Lathe. Practical Action Publishing, 1986. http://dx.doi.org/10.3362/9781780442419.001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hannah, Phillip R. "A Personal Prospective on the Quest for Higher Precision Diamond Turning Lathes." In Ultraprecision in Manufacturing Engineering. Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-83473-8_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Joshi, Vivek, and Harish Kumar. "Optimization of CNC Lathe Turning: A Review of Technique, Parameter and Outcome." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-8542-5_85.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Zhao, Gang, Zhiping Deng, and Shengjin Chen. "Effect of Vibration on Imaging Quality of CCD during the CNC Lathe Turning." In Advances in Intelligent and Soft Computing. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29387-0_105.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Turning lather"

1

Fairweather, N. D., N. Platts, and D. R. Tice. "Stress-Corrosion Crack Initiation of Type 304 Stainless Steel in Atmospheric Environments Containing Chloride: Influence of Surface Condition, Relative Humidity, Temperature and Thermal Sensitization." In CORROSION 2008. NACE International, 2008. https://doi.org/10.5006/c2008-08485.

Full text
Abstract:
Abstract Previous work by the present authors has described the influence of a range of variables on atmospheric chloride-induced stress corrosion initiation behavior of Type 304 stainless steels using polished C-rings1. This paper extends the previous studies in order to establish the effect of surface condition on the initiation of SCC. Three machining conditions were utilized in this study, each using different machining combinations in terms of material removal, either by lathe turning or turning followed by grinding. These conditions all produced significantly greater crack initiation tha
APA, Harvard, Vancouver, ISO, and other styles
2

Abbasov, Vagif, Fariz Amirov, Samir Amirli, Shalala Hasanli, and Karel Frana. "Formation of Shaft Accuracy during Mechanical Processing on CNC Machines." In 2nd International Scientific-Practical Conference "Machine Building and Energy: New Concepts and Technologies". Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-n5ukb8.

Full text
Abstract:
The article discusses the study of the deformation of shafts with a diameter of ø30mm and a length of 400 mm during processing on CNC lathes. Experiments have revealed that during rough turning of the shafts, the magnitude of shaft deformation is 2.2-2.5 times greater compared to finish turning. It has been determined that during processing shafts on a CNC lathe, the maximum deformation is observed near the tailstock side of the machine.
APA, Harvard, Vancouver, ISO, and other styles
3

Bogatenkov, Sergey, Natalia Sazonova, Vagif Movlazade, Heyran Abbasova, Ramil Dadashov, and Ruslan Bazhenov. "Digital Twins for Computer Aided Design on Lathe Operations." In 2nd International Scientific-Practical Conference "Machine Building and Energy: New Concepts and Technologies". Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-ut86wn.

Full text
Abstract:
Automated design of operations performed on turning machines is difficult due to the lack of digital twins that allow to digitally represent tool parameters and variants of their placement on the positions of the machine. The aim of the work is to develop digital twins for the automated design of operations performed on lathes based on the performance criterion. On the basis of application of digital twins, algorithms of automated design of operations performed on turning machines for different types of production have been developed. The results of the research have been realized in CAD of op
APA, Harvard, Vancouver, ISO, and other styles
4

Jimeno, Antonio, Sergio Cuenca, Antonio Martinez, and Jose Luis Sanchez Romero. "Accelerating Tool Path Computing in Turning Lathe Machining." In 2007 3rd Southern Conference on Programmable Logic. IEEE, 2007. http://dx.doi.org/10.1109/spl.2007.371727.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

SASAGAWA, HIROYUKI, MASANOBU CHIBA, and NOBORU SUGIMOTO. "Development of a Safety Simulator for Lathe Turning." In Third International Conference on Advances in Mechanical and Robotics Engineering- AMRE 2015. Institute of Research Engineers and Doctors, 2015. http://dx.doi.org/10.15224/978-1-63248-066-8-99.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Tumer, Irem Y., R. S. Srinivasan, Kristin L. Wood, and Ilene Busch-Vishniac. "Fractal Precision Models of Lathe-Type Turning Machines." In ASME 1993 Design Technical Conferences. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/detc1993-0425.

Full text
Abstract:
Abstract The primary objective of this research is to develop surface models of machining processes to simulate machined surface profiles and analyze their structure. In this paper, fractal analysis is used to discover and characterize the variational pattern of turned surfaces. This analysis provides a means of explicitly stating the precision of a machining process. The results are used to further test the validity of the concept of fractal dimensions at tolerance scales and to establish a relation between surface models, experimental surfaces, and fractals. Based on these results, a more co
APA, Harvard, Vancouver, ISO, and other styles
7

Miesner, John E., Reza Ghanadan, and Stephen D. O’Regan. "Active Structural Control of Vertical Turning Lathe Vibrations." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-1082.

Full text
Abstract:
Abstract An active control system has been developed to suppress tool vibration on a Vertical Turning Lathe (VTL). This system reduced surface roughness by two-thirds and raised by 23% the metal removal rate achievable before the onset of chatter. The system mechanical and sensor portions are contained completely within the VTL ram envelope. The electronic components are in a separate enclosure which also provides a simple user interface. Accelerometers embedded in the VTL ram sense the ram motion in two directions. Signal conditioning and integration electronics pass the ram velocity to the d
APA, Harvard, Vancouver, ISO, and other styles
8

Guan, Chao-liang, Yi-fan Dai, Zi-qiang Yin, and Fan Yang. "Freeform turning lathe with direct drives and aerostatic bearing." In 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, edited by Li Yang, John M. Schoen, Yoshiharu Namba, and Shengyi Li. SPIE, 2009. http://dx.doi.org/10.1117/12.830788.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Morimoto, Yoshitaka, Katsuhiro Nakagaki, and Hideharu Kato. "Machining of Non-Axisymmetric Curved Surface by Lathe Turning." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-63317.

Full text
Abstract:
A new CNC lathe driven by a linear motor has been developed to realize the machining of complex non-axisymmetric curved surfaces with rotational axis such as eccentric and spiral cylindrical volume, conical cams and artificial femoral stem. These have been realized by milling and/or grinding machines. In this case, there is a serious problem. It takes a long time to machine by milling or grinding. Furthermore, the machining point between a curved surface and a milling tool or a grinding wheel can be regarded as a single point contact just as same as lathe turning. We propose a new turning meth
APA, Harvard, Vancouver, ISO, and other styles
10

Casas Cobo, Francisco Javier. "Ronchamp in the spotlight. The feature of a shocking building in the 50s journals." In LC2015 - Le Corbusier, 50 years later. Universitat Politècnica València, 2015. http://dx.doi.org/10.4995/lc2015.2015.942.

Full text
Abstract:
Abstract: Although currently it is largely accepted that Chapelle Notre-Dame du Haut at Ronchamp is one of the milestones in Le Corbusier’s works, there is no less agreement in saying that it was one of the most controversial of his works and one turning point in modern architecture, not only in terms of digging a grave for functionalism but to opening a window to a wide bunch of architects and works that would have been excluded from history and maybe forever otherwise. In order to recall its importance, we must look back to how architectural journals featured Ronchamp in the mid fifties as,
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Turning lather"

1

Attanasio, Orazio P., Florencia Lopez Boo, Diana Perez-Lopez, and Sarah Anne Reynolds. Inequality in the Early Years in LAC: A Comparative Study of Size, Persistence, and Policies. Inter-American Development Bank, 2023. http://dx.doi.org/10.18235/0005359.

Full text
Abstract:
Gaps in child development by socioeconomic status (SES) start early in life, are large and can increase inequalities later in life. We use recent national-level, cross-sectional and longitudinal data to examine inequalities in child development (namely, language, cognition, and socio-emotional skills) of children 0-5 in five Latin American countries (Chile, Colombia, Mexico, Peru and Uruguay). In the cross-section analysis, we find statistically significant gaps with inequality patterns that widely differ across countries. For instance, gaps in language and cognition for Uruguay and Chile are
APA, Harvard, Vancouver, ISO, and other styles
2

Yahav, Shlomo, John Brake, and Orna Halevy. Pre-natal Epigenetic Adaptation to Improve Thermotolerance Acquisition and Performance of Fast-growing Meat-type Chickens. United States Department of Agriculture, 2009. http://dx.doi.org/10.32747/2009.7592120.bard.

Full text
Abstract:
: The necessity to improve broiler thermotolerance and performance led to the following hypothesis: (a) thethermoregulatory-response threshold for heat production can be altered by thermal manipulation (TM) during incubation so as to improve the acquisition of thermotolerance in the post-hatch broiler;and (b) TM during embryogenesis will improve myoblast proliferation during the embryonic and post-hatch periods with subsequent enhanced muscle growth and meat production. The original objectives of this study were as follow: 1. to assess the timing, temperature, duration, and turning frequency r
APA, Harvard, Vancouver, ISO, and other styles
3

van der Sloot, Bart. The Quality of Life: Protecting Non-personal Interests and Non-personal Data in the Age of Big Data. Universitätsbibliothek J. C. Senckenberg, Frankfurt am Main, 2021. http://dx.doi.org/10.21248/gups.64579.

Full text
Abstract:
Under the current legal paradigm, the rights to privacy and data protection provide natural persons with subjective rights to protect their private interests, such as related to human dignity, individual autonomy and personal freedom. In principle, when data processing is based on non-personal or aggregated data or when such data pro- cesses have an impact on societal, rather than individual interests, citizens cannot rely on these rights. Although this legal paradigm has worked well for decades, it is increasingly put under pressure because Big Data processes are typically based indis- crimin
APA, Harvard, Vancouver, ISO, and other styles
4

Méndez Méndez, Nahomi, Andrea Mususy Méndez García, and Luís Ángel Méndez Carreaga. Somos del Mar: Desarrollo y Comunidad en el Manglito. CORIOLI Institute, 2023. http://dx.doi.org/10.59498/sxhw1065.

Full text
Abstract:
El Manglito was a community in Baja California Sur, Mexico, that was turning into a cesspool for all the communities surrounding it. About 15 years ago, an NGO NOS brought in biologists and environmental scientists to work with the community. NOS took steps to clean up community by removing waste and and implementing sustainable fishing practices. 15 years later, a sharp increase in cartel violence was reported. Since the COVID-19 pandemic, cartel violence inward into Mexico has both increased and diversified. With border closures negatively affecting the cartel’s economy, they have turned to
APA, Harvard, Vancouver, ISO, and other styles
5

Christensen, Steen. Documentation of Edcrop – version 1: A Python package to simulate field-scale evapotranspiration and drainage from crop, wetland, or forest. Royal Danish Library, 2024. http://dx.doi.org/10.7146/aul.539.

Full text
Abstract:
Evapotranspiration is one of the major components of Earth’s Water Balance, being the sum of evaporation and plant transpiration from the land and ocean surface. This report documents edcrop, a Python package that use climate input to simulate field-scale evapotranspiration and drainage from the root zone of an area covered with a crop, a wetland, or a forest. The conceptual model implemented in edcrop is a modification of the Evacrop model by Olesen and Heidmann (2002), which itself builds on the Watcros model by Aslyng and Hansen (1982). The edcrop conceptualization is based on consideration
APA, Harvard, Vancouver, ISO, and other styles
6

Bar-Joseph, Moshe, William O. Dawson, and Munir Mawassi. Role of Defective RNAs in Citrus Tristeza Virus Diseases. United States Department of Agriculture, 2000. http://dx.doi.org/10.32747/2000.7575279.bard.

Full text
Abstract:
This program focused on citrus tristeza virus (CTV), the largest and one of the most complex RNA-plant-viruses. The economic importance of this virus to the US and Israeli citrus industries, its uniqueness among RNA viruses and the possibility to tame the virus and eventually turn it into a useful tool for the protection and genetic improvement of citrus trees justify these continued efforts. Although the overall goal of this project was to study the role(s) of CTV associated defective (d)-RNAs in CTV-induced diseases, considerable research efforts had to be devoted to the engineering of the h
APA, Harvard, Vancouver, ISO, and other styles
7

Rich, Megan, Charles Beightol, Christy Visaggi, Justin Tweet, and Vincent Santucci. Vicksburg National Military Park: Paleontological resource inventory (sensitive version). National Park Service, 2023. http://dx.doi.org/10.36967/2297321.

Full text
Abstract:
Vicksburg National Military Park (VICK) was established for its historical significance as a one of the principle military sieges resulting in a turning point during the American Civil War. The steep terrain around the city of Vicksburg was integral in the military siege, providing high vantage points and a substrate that was easy to entrench for the armies, but unknown to many is the fossil content, particularly a diversity of fossil mollusks. These fossils at VICK are important paleontological resources which have yet to receive focused attention from park staff, visitors, and researchers. T
APA, Harvard, Vancouver, ISO, and other styles
8

Minz, Dror, Stefan J. Green, Noa Sela, Yitzhak Hadar, Janet Jansson, and Steven Lindow. Soil and rhizosphere microbiome response to treated waste water irrigation. United States Department of Agriculture, 2013. http://dx.doi.org/10.32747/2013.7598153.bard.

Full text
Abstract:
Research objectives : Identify genetic potential and community structure of soil and rhizosphere microbial community structure as affected by treated wastewater (TWW) irrigation. This objective was achieved through the examination soil and rhizosphere microbial communities of plants irrigated with fresh water (FW) and TWW. Genomic DNA extracted from soil and rhizosphere samples (Minz laboratory) was processed for DNA-based shotgun metagenome sequencing (Green laboratory). High-throughput bioinformatics was performed to compare both taxonomic and functional gene (and pathway) differences betwee
APA, Harvard, Vancouver, ISO, and other styles
9

Machinist dies after being struck by object thrown from turning lathe. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 1998. http://dx.doi.org/10.26616/nioshsface97mn028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Turning lather' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography