Relevant bibliographies by topics / Turning parameters

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Turning parameters'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Turning parameters.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Turning parameters"

1

Kumar, Ramesh, Ashwani Kumar, Laxmikant Laxmikant, Nitesh Dutt, and Varun Pratap Singh. "Cutting Parameters Optimization in Turning Operation using Taguschi Method." International Journal of Materials Manufacturing and Sustainable Technologies 1, no. 2 (2022): 22–30. http://dx.doi.org/10.56896/ijmmst.2022.1.2.009.

Full text
Abstract:
The objective of this study is to optimise the cutting parameters in Turning Operation. For this objective Taguchi Method was used. S/N ratio, ANNOVA was used to investigate the cutting force components & Material removal rate (MRR). In results optimal cutting parameters were obtained and the factors affecting cutting performance were analysed. It was concluded that cutting parameters i.e. depth of cut has influence on cutting force and material removal rate.
APA, Harvard, Vancouver, ISO, and other styles
2

Sood, P. K., Rakesh Sehgal, and D. K. Dwivedi. "Optimization Of Turning Parameters For Surface Roughness In CNC Turning." i-manager's Journal on Mechanical Engineering 1, no. 1 (2011): 26–30. http://dx.doi.org/10.26634/jme.1.1.1214.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Štefek, Adam, Jan Raška, Libor M. Hlaváč, and Sławomir Spadło. "Investigation of Significant Parameters during Abrasive Waterjet Turning." Materials 14, no. 16 (2021): 4389. http://dx.doi.org/10.3390/ma14164389.

Full text
Abstract:
This paper presents an investigation of abrasive waterjet turning (AWJT). The purpose of the article was to investigate significant parameters of the turning process and to evaluate their impact on the turning product. The influence of the traverse speed, the rotational speed, and the relative position of the jet to the specimen (lateral jet shift) were investigated. Based on the previous research done in this field, the multi-pass tangential turning method was selected. Rotational speed does not seem to have a significant impact on the AWJ turning process. However, the relative position of th
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Chang-Ming, An-Le Mu, Yong-Xin Wang, Yun Wang, and Yu Zhang. "Influence of Turning Parameters on Turning Performance of Ultra-High Strength Steel." Integrated Ferroelectrics 209, no. 1 (2020): 110–18. http://dx.doi.org/10.1080/10584587.2020.1728817.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Huang, Xianzhen, Mingwei Hu, and Yimin Zhang. "An approach for optimization of turning parameters considering uncertainty parameters." International Journal of Advanced Manufacturing Technology 93, no. 9-12 (2017): 3339–46. http://dx.doi.org/10.1007/s00170-017-0748-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Reddy, S. Amarnath, and Mr J. Sree Hari. "Optimization of Cutting Parameters in Turning Operation by Using Taguchi Method." International Journal of Trend in Scientific Research and Development Volume-3, Issue-1 (2018): 935–40. http://dx.doi.org/10.31142/ijtsrd19108.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pradhan, Sharad Kumar, and Surendra Kumar Saini. "Multi-Objective Optimization of CNC Turning Machining Parameters." Advanced Materials Research 1016 (August 2014): 172–76. http://dx.doi.org/10.4028/www.scientific.net/amr.1016.172.

Full text
Abstract:
An experimental investigation into CNC turning operation on Brass C36000 alloy as work piece material which is widely used for various industrial applications is performed. Multi objective optimization is carried out to find out the influencing machining parameters among spindle speed (rpm), feed (mm per revolution) and depth of cut (mm) for CNC turning of Brass C36000 alloy with surface finish and Material Removal Rate as performance parameters using Taguchi method. Taguchi orthogonal array [L27(33)] is used for the experimental design. All experiments are conducted using EMCO Concept Turn 25
APA, Harvard, Vancouver, ISO, and other styles
8

Bhuiyan, Tanveer Hossain, and Imtiaz Ahmed. "Optimization of Cutting Parameters in Turning Process." SAE International Journal of Materials and Manufacturing 7, no. 1 (2014): 233–39. http://dx.doi.org/10.4271/2014-01-9097.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Marko, Hrelja, Klancnik Simon, Irgolic Tomaz, Paulic Matej, Balic Joze, and Brezocnik Miran. "Turning Parameters Optimization Using Particle Swarm Optimization." Procedia Engineering 69 (2014): 670–77. http://dx.doi.org/10.1016/j.proeng.2014.03.041.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Mohammad, Haider Maath, Nuha Hadi Jasim Al Hasan, and Murtadha Abbas Jabbar. "Optimization of Sustainable Carbon Steel Turning Parameters." Instrumentation Mesure Métrologie 23, no. 03 (2024): 225–31. http://dx.doi.org/10.18280/i2m.230306.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Turning parameters"

1

Dawson, Ty Grant. "Effects of cutting parameters and tool wear in hard turning." Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/17816.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bothner, Rose. "An optimization model for selecting the economical cutting parameters in an external forward turning operation /." Online version of thesis, 1990. http://hdl.handle.net/1850/10592.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mgwatu, Mussa Iddi. "Optimization of machining parameters with consideration of tool adjustment in turning operations." Thesis, University of Ottawa (Canada), 1996. http://hdl.handle.net/10393/10431.

Full text
Abstract:
This thesis presents six optimization models which are developed and solved in two stages in order to integrate tolerancing and machining parameters decisions. One model is developed in the first stage. The first-stage model is related to a design problem and provides better part tolerance to be used in the second stage to incorporate tool adjustment decisions into the optimization of machining parameters. Five models are developed in the second stage and are divided into single-machine and multi-machine turning operation problems. For single-machine turning operations, three models are formul
APA, Harvard, Vancouver, ISO, and other styles
4

Mgwatu, Mussa I. "Optimization of machining parameters with consideration of tool adjustment in turning operations." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1996. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/mq20936.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hashmi, Kashmeri. "Development of fuzzy logic based software for selection of turning and drilling parameters." Thesis, Liverpool John Moores University, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.402945.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Сагайдак, Богдан Степанович, та Bogdan Sahaydak. "Оптимізаційне дослідження режимів обробки на токарному верстаті горизонтальної компоновки". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2019. http://elartu.tntu.edu.ua/handle/lib/29815.

Full text
Abstract:
Роботу виконано на кафедрі конструювання верстатів, інструментів та машин Тернопільського національного технічного університету імені Івана Пулюя Міністерства освіти і науки УкраїниЗахист відбудеться 24 грудня 2019 р. на засіданні екзаменаційної комісії №11 у Тернопільському національному технічному університеті імені Івана Пулюя за адресою: 46001, м. Тернопіль, вул. Руська, 56, навчальний корпус №4, ауд. В1<br>У дипломній роботі магістра розглянуті результати оптимізаційних досліджень режимів обробки на токарному верстаті горизонтальної компоновки. Метою роботи є забезпечення підвищення ефект
APA, Harvard, Vancouver, ISO, and other styles
7

Kobaslic, Endi. "A parameter study when drilling holes in flanges." Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-12738.

Full text
Abstract:
Stabilitet och vibrationer inom invändiga svarvningsprocesser är ett område som kräver mer forskning. Tidigare studier visar att problem med stabilitet och utböjning är vanligt vid dessa processer och att de orsakar oönskade vibrationer i processen. Vibrationerna har en negativ effekt på bland annat ytjämnheten, som har visat sig vara en viktig parameter vid invändig svarvning. Syftet med den här studien var därför bland annat varit att undersöka utifrån vilka olika skärparametrar en konstruktions stabilitet kan säkerställas för att uppnå kravspecificerad ytjämnhet. Utöver det skapades en rörk
APA, Harvard, Vancouver, ISO, and other styles
8

Tichý, Vojtěch. "Analýza tvorby třísky pomocí digitální vysokorychlostní kamery." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231991.

Full text
Abstract:
This thesis covers matters related to high-speed digital cameras and their usage in various spheres of human activities, mainly in research of chip forming. Thesis summarises important knowledge needed for creation of high-speed recordings and choice of suitable lenses. Focus is taken on creation of high-speed recordings of chip forming process in turning operation outside grooving by using of different types of chipformers. Main goal is to verify its functionality in specific value range of feed per revolution.
APA, Harvard, Vancouver, ISO, and other styles
9

Domellöf, Erik. "Development of functional asymmetries in young infants : A sensory-motor approach." Doctoral thesis, Umeå universitet, Institutionen för psykologi, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-751.

Full text
Abstract:
Human functional laterality, typically involving a right-sided preference in most sensory-motor activities, is still a poorly understood issue. This is perhaps particularly true in terms of what underlying mechanisms that may govern lateral biases, as well as the developmental origins and course of events. The present thesis aims at investigating functional asymmetries in the upper and lower body movements of young human infants. In Study I, the presence of side biases in the stepping and placing responses and head turning in healthy fullterm newborns were explored. No evident lateral bias for
APA, Harvard, Vancouver, ISO, and other styles
10

Товстокор, О. П. "Удосконалення технологічного процесу виготовлення вала Н230.00.017-42СП шляхом інтенсифікації чорнового токарного оброблення". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/81781.

Full text
Abstract:
Пояснювальна записка виконана на 112 сторінках, включає 23 рисунки, 18 таблиць, бібліографії із 35 джерел, двох додатків. Питання підвищення точності, якості обробки та продуктивності завжди залишаються актуальними для машинобудування. Удосконалення розрахунків на міцність, призводить до все більшого випуску високоточних деталей недостатньої жорсткості, одним із видів яких є штоки та вали з відношенням довжини до діаметра більше 10, отже дослідження токарної обробки деталі вал являє собою актуальну наукову і практичну задачі. Метою дослідження є удосконалення технологічного процесу виготовле
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Turning parameters"

1

Avilez, GerShun. The Claim of Innocence. University of Illinois Press, 2017. http://dx.doi.org/10.5406/illinois/9780252040122.003.0002.

Full text
Abstract:
This chapter tracks how artists inhabit the subjective space of whiteness as a closing ranks move. This idea may seem counterintuitive, but for many thinkers, exploring whiteness is useful in determining the conventional parameters of Black identity. The act of identifying and challenging these boundaries creates the opportunity for imagining a unity not plagued by restrictive conceptions of blackness. Therefore, turning inward does not appear as a mere rejection of whiteness in favor of shoring up blackness. The chapter then highlights how the rhetoric of White innocence provides the foundati
APA, Harvard, Vancouver, ISO, and other styles
2

Haerens, Margaret. The NFL National Anthem Protests. ABC-CLIO, 2018. http://dx.doi.org/10.5040/9798400691515.

Full text
Abstract:
This volume provides a concise but authoritative overview of the NFL national anthem protests and the fierce debates they have sparked about patriotism, constitutional rights, military service, police brutality, and social justice. This book in the 21st Century Turning Points series is a one-stop resource for understanding the people and events changing America today. This volume is devoted to the NFL national anthem protests, which have triggered both fierce condemnation and spirited defenses since August 2016, when San Francisco 49ers quarterback Colin Kaepernick first refused to stand for t
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Turning parameters"

1

Negi, Pawan Kumar, Mangey Ram, and Om Prakash Yadav. "Turning Process and Its Cutting Parameters." In Basics of CNC Programming. River Publishers, 2022. http://dx.doi.org/10.1201/9781003337317-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Saini, Surendra Kumar, and Prashant Kumar. "CNC Turning Process Parameters Optimization for Stainless Steel." In Algorithms for Intelligent Systems. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4862-2_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wu, Youde, and Jinchun Feng. "Research on Turning Parameters Optimization Based on Genetic Algorithm." In Lecture Notes in Electrical Engineering. Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-1839-5_68.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Popat, Tanpure Sandesh, and Netra Pal Singh. "Process Parameters Optimization of Stainless Steel Turning: A Survey." In Lecture Notes in Mechanical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-9523-0_35.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Saidi, Riadh, Tarek Mabrouki, Salim Belhadi, and Mohamed Athmane Yallese. "Multi-response Optimization of Turning Parameters with TOPSIS Method." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-14615-2_57.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Galantucci, L. M., R. Spina, and L. Tricarico. "Constraint Programming Approach for the Optimization of Turning Cutting Parameters." In Advanced Manufacturing Systems and Technology. Springer Vienna, 1996. http://dx.doi.org/10.1007/978-3-7091-2678-3_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sharma, Anurag, R. C. Singh, and Ranganath M. Singari. "Optimization of Cutting Parameters of Machinability Aspects During Dry Turning." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1071-7_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Luo, Zhiwen, Junning Zhang, Kui Huang, et al. "Multi-objective Optimization of Cutting Parameters for Turning Curved Surfaces." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-6226-4_76.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Gupta, N., and R. S. Walia. "Predictive Soft Modeling of Turning Parameters Using Artificial Neural Network." In Lecture Notes in Mechanical Engineering. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-3033-0_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Jadhav, Mahesh R., Krishnakumar D. Joshi, Pramod V. Mulik, Prashant J. Patil, Pradyumna S. Mane, and Prashant S. Jadhav. "Optimisation of turning process parameters using Deform-3D for cutting forces." In Recent Advances in Material, Manufacturing, and Machine Learning. CRC Press, 2023. http://dx.doi.org/10.1201/9781003370628-12.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Turning parameters"

1

Yang, Fulun, Bi Zhang, and Junyi Yu. "Chatter Suppression With Multiple Time-Varying Parameters in Turning." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0679.

Full text
Abstract:
Abstract This paper presents a new method, multiple time-varying parameter (MTVP) turning for chatter suppression. Compared to the single time-varying parameter (STVP) turning, the new method uses both time-varying spindle speed and time-varying rake angle to suppress chatter. The paper provides theoretical analyses on the MTVP turning and experimental results to justify the analytical results. It compares the effects of chatter suppression between the MTVP and STVP turnings, and discusses the possible mechanisms of chatter suppression. The paper then concludes that the MTVP turning method is
APA, Harvard, Vancouver, ISO, and other styles
2

Kan, Hongliang, Fenglong Kan, Nan Chen, et al. "Parameters Turning of ADRC based on Neural Network." In International Conference on Education, Management, Computer and Society. Atlantis Press, 2016. http://dx.doi.org/10.2991/emcs-16.2016.187.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Wu, and Yuan-min Zhang. "Optimizing Turning Parameters Based on Correlation Pruning Neural Networks." In 2009 IITA International Conference on Control, Automation and Systems Engineering, CASE 2009. IEEE, 2009. http://dx.doi.org/10.1109/case.2009.21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Yuan-liang, Zhi-min Zhou, Wei Xiu, and Zhi-hui Xia. "Influence of cutting parameters on diamond turning titanium alloy." In 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, edited by Li Yang, Yaolong Chen, Ernst-Bernhard Kley, and Rongbin Li. SPIE, 2007. http://dx.doi.org/10.1117/12.783007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

"OPTIMIZE THE PARAMETERS OF DUAL TURNING PROCESS USING TAGUCHI METHODOLOGY." In International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering. ELK ASIA PACIFIC JOURNAL, 2016. http://dx.doi.org/10.16962/elkapj/si.arimpie-2016.34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Datta, Rituparna, and Anima Majumder. "Optimization of turning process parameters using Multi-objective Evolutionary algorithm." In 2010 IEEE Congress on Evolutionary Computation (CEC). IEEE, 2010. http://dx.doi.org/10.1109/cec.2010.5586296.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Coelho, Ricardo. "Determining parameters in multi-pass turning operations under fuzzy environmental." In 2015 Conference of the International Fuzzy Systems Association and the European Society for Fuzzy Logic and Technology (IFSA-EUSFLAT-15). Atlantis Press, 2015. http://dx.doi.org/10.2991/ifsa-eusflat-15.2015.169.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lu, Kaibo, Xiaoli Zhang, Minqing Jing, Heng Liu, Jamal Ghorieshi, and Rodney Ridley. "Optimization of Machining Parameters in Turning Processes by Dynamic Programming." In ASME 2012 5th Annual Dynamic Systems and Control Conference joint with the JSME 2012 11th Motion and Vibration Conference. ASME, 2012. http://dx.doi.org/10.1115/dscc2012-movic2012-8604.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dhiman, Suresh, Rakesh Sehgal, and S. K. Sharma. "Studies of Machining Parameters of Al Alloy A-390 During Turning." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-64128.

Full text
Abstract:
Selection of any casting alloy is dependent on a wide variety of factors such as casting process, service requirement and economy of processing viz. weldability, castability and machinability. Out of these, machinability plays an important role in the selection of material for its commercial exploitation. In general, more than 80% of the manufactured parts are machined before they are ready for use. Thus machinability of a material controls significantly its economy in various applications. In this paper, machinabilty is evaluated by studying various data/parameters of Al alloy (A-390) such as
APA, Harvard, Vancouver, ISO, and other styles
10

Wilden, J., S. Jahn, G. Fischer, and S. Wang. "Influencing Parameters on the Turning Process of Fe-Based Thermal Sprayed Coatings." In ITSC2008, edited by B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima, and G. Montavon. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2008. http://dx.doi.org/10.31399/asm.cp.itsc2008p0591.

Full text
Abstract:
Abstract Thermal Spray processes are widely used to fabricate corrosion and wear resistant coatings respectively. However, these coatings have to be finished generally in subsequent steps, for example by turning, milling or grinding, to adjust the the required properties, e.g., surface roughness and accuracy. Up to now grinding is the most common post processing for wire arc sprayed coatings, but in recent years the hard turning technology gained high interest for coating treatment due to high machining efficiency. The aim of the present work is to enhance the machinability of different therma
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Turning parameters"

1

Moore, David, Damarys Acevedo-Acevedo, and Philip Gidley. Application of clean dredged material to facilitate contaminated sediment source control. Engineer Research and Development Center (U.S.), 2022. http://dx.doi.org/10.21079/11681/45342.

Full text
Abstract:
Navigation channels, turning basins, and other US Army Corps of Engineers (USACE)–managed navigation infrastructure often serve as repositories for contaminated sediment from off-site sources. As much as 10% of the material that USACE dredges on an annual basis is contaminated such that it requires additional and more costly management (for example, rehandling and placement in managed confined disposal facilities). Presence of contaminated sediments constrain potential management options resulting in additional costs and opportunity loss from the inability to beneficially use the material. One
APA, Harvard, Vancouver, ISO, and other styles
2

Karandikar, Jaydeep, Junghoon Chae, Michael Gomez, and Jamie Goettler. Visualization and data analytics for optimal process parameter selection for turning. Office of Scientific and Technical Information (OSTI), 2024. http://dx.doi.org/10.2172/2462877.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Turning parameters' for particular source types:
Journal articles Dissertations / Theses
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography