Academic literature on the topic 'Two-stroke engines performance'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Two-stroke engines performance.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Two-stroke engines performance"

1

Shokrollahihassanbarough, Farzad, Ali Alqahtani, and Mirosław Wyszynski. "Thermodynamic simulation comparison of opposed two-stroke and conventional four-stroke engines." Combustion Engines 162, no. 3 (2015): 78–84. http://dx.doi.org/10.19206/ce-116867.

Full text
Abstract:
Today’s technology leveraging allows OP2S (Opposed Piston 2-Stroke) engine to be considered as an alternative for the conventional four-stroke (4S) engines as mechanical drive in various applications, mainly in transportation. In general, OP2S engines are suited to compete with conventional 4-stroke engines where power-to-weight ratio, power-to-bulk volume ratio and fuel efficiency are requirements. This paper does present a brief advent, as well as the renaissance of OP2S engines and the novel technologies which have been used in the new approach. Also precise thermodynamic benefits have been
APA, Harvard, Vancouver, ISO, and other styles
2

Ramakrishnan, V., R. Thamilarasan, and K. Purushothaman. "Performance Evaluation of EGR in Two Stroke I.C. Engine." Applied Mechanics and Materials 812 (November 2015): 60–63. http://dx.doi.org/10.4028/www.scientific.net/amm.812.60.

Full text
Abstract:
Petrol engines are known for their simplicity, low cost and maintenance. However nowadays use of two stroke petrol engines are fading away from the market. An attempt has been made here to revive the use of these old engines by using Exhaust Gas Recirculation (EGR) to improve performances.Short circuiting of fresh charge is an important contributing factor for reduction in performance in two stroke engines. Our project is aimed to reduce short circuiting of fresh charge by admitting cooled exhaust gas to pass through reed valves fitted at the upper end of the transfer passage, in a crank case
APA, Harvard, Vancouver, ISO, and other styles
3

Kenny, R. G. "Developments in Two-Stroke Cycle Engine Exhaust Emissions." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 206, no. 2 (1992): 93–106. http://dx.doi.org/10.1243/pime_proc_1992_206_165_02.

Full text
Abstract:
This paper is concerned with the exhaust emissions from two-stroke cycle spark ignition engines and the means being investigated to reduce them. The simple two-stroke engine has inherently low levels of NOx emissions and high levels of hydrocarbon emissions. The reasons for these emissions characteristics are explained by reference to the open literature. The two-stroke engine is used in a wide range of applications including low-cost, low-output mopeds and high-performance motorcycles. More recently there has been a resurgence of interest in the two-stroke as an alternative to the four-stroke
APA, Harvard, Vancouver, ISO, and other styles
4

Sapate, Kumar D., and A. N. Tikekar. "Mechanical Modifications to Convert Small Two Strokes Carbureted Engine to Electronic Fuel Injection System Engine to Reduce Emission and Fuel Consumption." Advanced Materials Research 768 (September 2013): 213–17. http://dx.doi.org/10.4028/www.scientific.net/amr.768.213.

Full text
Abstract:
The evolution of four stroke engines and improved environmental pollution control norms has pushed the two-stroke engines towards obsolescence due to their inherent design problems. This has made the existing manufacturers & users of two-stroke engines a setback. In this paper attempt has been made to high light the performance parameters in respect of fuel efficiency and emission control. In this research work an effort is made to retrofit the commonly used two stroke engine for optimal performance by using EFI engine. It mainly includes injector locations with reference to spark plug whi
APA, Harvard, Vancouver, ISO, and other styles
5

Kyrtatos, N. P., and I. Koumbarelis. "A Three-Zone Scavenging Model for Two-Stroke Uniflow Engines." Journal of Engineering for Gas Turbines and Power 110, no. 3 (1988): 531–37. http://dx.doi.org/10.1115/1.3240167.

Full text
Abstract:
A three-zone scavenging model for two-stroke uniflow engines was developed and used in conjunction with a control-volume-type engine simulation code for performance prediction of long stroke uniflow-type marine engines. In this model it is attempted to simulate the three different regions perceived to exist inside the cylinder during scavenging, namely the air, mixing, and combustion products regions, by modeling each region as a separate control volume. Two time-varying coefficients are used to specify the rates of entrainment of the air and the burned gases into the mixing region. Results of
APA, Harvard, Vancouver, ISO, and other styles
6

Haddad, S. D. "Piston Motion and Thermal Loading Analyses of Two-Stroke and Four-Stroke Cycle Engines for Locomotives." Journal of Engineering for Gas Turbines and Power 111, no. 3 (1989): 536–42. http://dx.doi.org/10.1115/1.3240288.

Full text
Abstract:
Two-stroke cycle and four-stroke cycle diesel engines are in use in rail traction, with the four-stroke cycle design dominating the field. Cycle simulations using computer programs have shown that the conventional two-stroke cycle is somewhat inferior to its four-stroke cycle counterpart in combustion efficiency and thermal loading. Research at Sulzer concluded that the conventional two-stroke cycle engine is not very suitable for locomotive application. A survey by Ricardos, based on an investigation of engines in current production for traction application, suggested that there are potential
APA, Harvard, Vancouver, ISO, and other styles
7

Boretti, Albert. "Design of Direct Injection Jet Ignition High Performance Naturally Aspirated Motorcycle Engines." Designs 3, no. 1 (2019): 11. http://dx.doi.org/10.3390/designs3010011.

Full text
Abstract:
Thanks to the adoption of high pressure, direct injection and jet ignition, plus electrically assisted turbo-compounding, the fuel conversion efficiency of Fédération Internationale de l'Automobile (FIA) F1 engines has been spectacularly improved up to values above 46% peak power, and 50% peak efficiency, by running lean of stoichiometry stratified in a high boost, high compression ratio environment. Opposite, Federation Internationale de Motocyclisme (FIM) Moto-GP engines are still naturally aspirated, port injected, spark ignited, working with homogeneous mixtures. This old fashioned but hig
APA, Harvard, Vancouver, ISO, and other styles
8

Hooper, P. R., T. Al-Shemmeri, and M. J. Goodwin. "Advanced modern low-emission two-stroke cycle engines." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 225, no. 11 (2011): 1531–43. http://dx.doi.org/10.1177/0954407011408649.

Full text
Abstract:
This paper reviews recent engines and associated technology offering potential low-emission two-stroke cycle operation for a range of applications. The study considers and discusses successfully applied modern production engines together with concepts exploring advanced possibilities for future application. The published results from research and development projects and the data from available technology are compared in terms of the specific performance. The paper does not compare combustion strategies or fluid dynamic aspects of two-stroke cycle engines but does consider and compare the data
APA, Harvard, Vancouver, ISO, and other styles
9

Arabaci, Emre. "Performance analysis of a novel six-stroke otto cycle engine." Thermal Science, no. 00 (2020): 144. http://dx.doi.org/10.2298/tsci190926144a.

Full text
Abstract:
In this study, a simulation model with finite time thermodynamics was presented for an Otto cycle six-stroke engine. In this six-stroke engine, two free strokes occur after the exhaust stroke. These free strokes cause the engine to have higher thermal efficiency. Due to high thermal efficiency, these six-stroke engines can be used in hybrid electric vehicles. In this study, the effect of residual gas fraction and stroke ratio on the effective power and effective thermal efficiency were investigated. In addition, heat balance was obtained for the engine and the use of fuel energy in the engine
APA, Harvard, Vancouver, ISO, and other styles
10

Wang, Yang, Wuqiang Long, Jingchen Cui, Xin Wang, Hua Tian, and Xiangyu Meng. "Research on two-stroke compression release braking performance of a variable mode valve actuation system." International Journal of Engine Research 21, no. 9 (2019): 1696–708. http://dx.doi.org/10.1177/1468087419894449.

Full text
Abstract:
In order to enhance the braking safety and improve the fuel economy and emission of heavy-duty engines, a variable mode valve actuation system which can switch operation modes flexibly among four-stroke driving, two-stroke compression release braking, and cylinder deactivation modes on a four-stroke engine was developed in this article. The switching was controlled by the four-stroke driving module and the two-stroke braking module, both of which have two states: effective state and failure state. Besides, a full-cycle numerical model of a six-cylinder turbocharged engine was established for t
APA, Harvard, Vancouver, ISO, and other styles
More sources
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!