Academic literature on the topic 'Ugandan minerals'

Uganda is one of the major cassava producing countries in the world. Currently, utilization of cassava is limited to semi-processed products through the informal sector. Cassava has technological potential as a raw material for agro-industrial products, such as flours for baked products, animal feeds and starch. The aim of this study was to investigate the chemical composition of five major cassava varieties grown in Nebbi distict (Uganda), to assess their potential as industrial raw materials. Analysis of the chemical composition of local (Nyamatia and Nyarukeca) and improved (NASE 3, NASE 14, and NASE 19) cassava varieties was carried out using standard methods. Results showed significant (p < 0.05) differences between the varieties indicating high levels of starch, calcium, magnesium, cyanonenic glucosides and phytates. The cassava varieties contain low levels of protein, lipids and minerals with respect to recommended daily intake of these nutrients. Moisture contents ranged from 5.43 for Nyamatia to 10.87 for NASE 19; ash from 1.05 for Nyamatia to 2.39 for NASE 14; crude fiber from 1.06 for Nyamatia to 1.18 for NASE 19; crude protein from 0.74 for Nyarukeca to 1.51 for NASE 14; crude lipid from 0.39 for Nyamatia to 0.63 for NASE 19; and starch contents from 66.72 for NASE 19 to 84.42 for NASE 3. The mineral contents (mg/kg): calcium ranged from 13.15 for Nyamatia to 16.56 for NASE 3; iron ranged from 0.002 for Nyarukeca to 0.01 for NASE 19; zinc ranged from 0.56 for Nyamatia to 0.87 for NASE 3; magnesium ranged from 3.58 for NASE 19 to 3.88 for Nyarukeca; and copper ranged from 0.002 for Nyamatia to 0.14 for NASE 3. The contents of anti-nutrients (mg/kg): cyanogenic glucosides ranged from 30 in NASE 3 and NASE 19 to 800 in Nyamatia; phytates ranged from 661.33 in Nyarukeca to 984.64 in NASE 3; oxalates ranged from 90.6 in Nyarukeca to 227.8 in NASE 3; and tannin ranged from 0.18 in Nyarukeca to 0.33 in NASE 3. Based on the chemical composition results, all the cassava varieties studied contain higher levels of cyanogenic glucosides than recommended by Ugandan and East African Standards, making them unsafe for direct utilization as food and food raw materials for industries at levels beyond 30% in food formulations. The high starch levels in all the cassava varieties make them valuable raw materials for starch and starch-related industries.

This study investigated the nutritional ecology of forest elephants in Kibale National Park, Uganda relative to crop-raiding behaviour, and examined nutritional differences between crops and food consumed by wild elephants. An index of dietary nutrient concentration was determined by quantifying the species and parts of plants consumed along feeding trails, collecting food items, and analysing foods for energy, fibre, protein, minerals and secondary compounds. Frequency of crop raiding was quantified over 13 mo. Energy and protein concentration was within suggested levels, but concentrations of several minerals, particularly sodium, were low relative to requirements based on captive elephants and values reported for other wild populations. The very low sodium concentrations of Kibale elephant diets and low availability of alternative sodium sources, such as soil or water, suggest that sodium drive is very likely in this population. Crops consumed by Kibale elephants had higher Na concentrations and lower concentrations of fibre and secondary compounds than wild diets. The known attraction of elephants to mineral sources throughout their range and the low mineral concentration of leaves, fruits, bark, and stems consumed by forest elephant in this study suggest that mineral nutrition is likely to be an important factor driving elephant behaviour and patterns of habitat use.

Background: Chia seed (Salvia hispanica L.) is becoming one of the most popular plantbased foods that contain the greatest amount of nutrients particularly omega-3 fatty acid, α-linolenic acid. It is therefore considered a functional food with pronounced health benefits. Objective: The purpose of this study was to determine the proximate composition, minerals, fatty acid profiles and phytochemical contents of chia seeds grown in East Africa (Kenya and Uganda). Methods: Official methods of analysis, 2005 were adopted, minerals determined by Atomic absorption spectrophotometer, phytochemicals were determined by standard methods and fatty acid profiles were analyzed by Gas chromatography. Results: Proximate composition indicated high contents of protein, fat and fiber. The fatty acid profiles revealed great amounts of α-linolenic acid (45.29-56.99%) followed by linoleic acid (15.9- 20.28%) and oleic acid (6.88-11.58%). However, the difference in the content of α-linolenic acid between samples was not significant (p = 0.7391). Mineral determination (mg/100g) showed high contents of potassium (492.96-862.98), phosphorous (486.45-569.45), calcium (297.47-429.09) and magnesium (192.22-202.97) while considerable amount was observed for iron, zinc, manganese, and copper. There was a significant difference (p = 0.0001) in mineral content between black chia Molo and white chia Bukembo with the exception of phosphorus. Conclusion: Both black and white chia seeds grown in East Africa, observed to have high amounts of α-linolenic acid, proteins, fats, fiber, and minerals. These findings support the evidence that chia is rich in nutrients that are beneficial to human health. Therefore, we suggest its incorporation in diets as a healthy food ingredient.

Based on the results of the first Russia—Africa Summit and Economic Forum, priority areas of economic cooperation, according to which concrete results can be achieved in the coming years, were identified. These are modern and high-tech mining and processing of minerals, geological exploration, energy (including renewable energy sources), infrastructure development (specifically the construction of railways and housing), agriculture, digital technology, medicine, science and education. Cooperation between Russian universities and African countries occupies a special place. Currently implemented by the Sergo Ordzhonikidze Russian State University for Geological Prospecting (MGRI), the scientific and educational initiative for the development of the mineral resource base of Uganda, presented in June 2019 to the country’s President Yoweri Museveni, is the basis for International cooperation between Russian universities in the East African region.

Abstract Background Data on bone health and renal impairment in people with human immunodeficiency virus (HIV) in resource-limited settings are limited. The primary aim of this study was to investigate the potential role of calcaneal quantitative ultrasonography (QUS) in predicting bone mineral density (BMD) reduction in a population of Ugandan HIV-infected individuals receiving long-term antiretroviral therapy; the secondary end point was to assess the prevalence of proximal tubular dysfunction and the correlation between elevated urinary retinol-binding protein–urinary creatinine ratio (uRBP/uCr) and reduced BMD. Methods We conducted a cross-sectional study at the Infectious Diseases Institute, Kampala, Uganda. We included 101 HIV-infected adults who had been receiving continuous antiretroviral therapy for ≥10 years and had undergone dual-energy x-ray absorptiometry (DXA) during the previous 12 months. All patients underwent calcaneal QUS evaluation and urine sample collection. Results DXA BMD measurements were significantly associated (P < .01) with calcaneal speed of sound, broadband ultrasound attenuation, and QUS index. Forty-seven individuals (47%) had abnormal uRBP/uCr values. A significant inverse correlation was observed between uRBP/uCr and DXA T scores (lumbar [P = .03], femoral neck [P < .001], and total hip [P = .002]). Conclusions Calcaneal QUS results showed a moderate correlation with DXA outputs. The identified high prevalence of subclinical tubular impairment also highlights the importance of expanding access to tenofovir disoproxil fumarate–sparing regimens in resource-limited settings.

ABSTRACT The crystal chemistries of five samples of minerals belonging to the fillowite group were structurally investigated: (A) fillowite from the Buranga pegmatite, Rwanda; (B) fillowite from the Kabira pegmatite, Uganda; (C) johnsomervilleite from Loch Quoich, Scotland; (D) johnsomervilleite from the Malpensata pegmatite, Italy; and (E) chladniite from the Sapucaia pegmatite, Minas Gerais, Brazil. Their crystal structures were refined in space group R (No. 148), using single-crystal X-ray diffraction data, to R1 values of (A) 3.79%, (B) 3.52%, (C) 4.14%, (D) 4.04%, and (E) 5.59%. Unit-cell parameters are: (A) a = 15.122(1), c = 43.258(4) Å; (B) a = 15.125(1), c = 43.198(3) Å; (C) a = 15.036(2), c = 42.972(9) Å; (D) a = 15.090(2), c = 43.050(9) Å; and (E) a = 15.1416(6), c = 43.123(2) Å. The asymmetric unit contains 15 cation sites with coordinations ranging from V to IX, as well as six P sites. The complex structure can be split into three types of chains running parallel to the c axis. These chains are composed of edge- and face-sharing polyhedra. Detailed cation distributions were determined for all five samples, and their comparison allowed us to establish the general formula A3BC11(PO4)9 for fillowite-type phosphates, where A represents the group of sites mainly occupied by Na, B the Ca sites, and C the sites containing the divalent cations Fe2+, Mn, and Mg. This formula was accepted by the CNMNC, and the four valid mineral species occurring in the fillowite group are fillowite (C = Mn), johnsomervilleite (C = Fe2+), chladniite (C = Mg), and galileiite (B and C = Fe2+). Stornesite-(Y) is discredited, since this mineral corresponds to Y-bearing chladniite.

In Uganda and Africa at large, up to 90% of the total energy used for food preparation and water pasteurization is from fossil fuels particularly firewood and kerosene which pollute the environment, yet there is abundant solar energy throughout the year, which could also be used. Uganda is abundantly rich in clay minerals such as ball clay, kaolin, feldspar, and quartz from which ceramic substrates were developed. Aluminium films of different thicknesses were deposited on different substrates in the diffusion pump microprocessor vacuum coater (Edwards AUTO 306). The optical reflectance of the aluminium films was obtained using a spectrophotometer (SolidSpec-3700/DUV-UV-VIS-NIR) at various wave lengths. The analysis of the results of the study revealed that the optical reflectance of the aluminium films was above 50% and increased with increasing film thickness and wavelength. Thus, this method can be used to produce reflector systems in the technology of solar cooking and other appliances which use solar energy.

<p>Development of products which can be produced from a country’s natural resources is very important as far as the industrialization of a nation and saving foreign exchange is concerned. Presently, industries in Uganda and the other states in the Lake Victoria region import all refractory-related-consumables, as the demand cannot be met locally. Based on the abundance of ceramic raw materials for high temperature applications in the region and the demand for refractories by industries it is pertinent to develop and manufacture firebricks by exploiting the locally available raw materials.</p><p>This thesis thus, concerns the characterisation of ceramic raw mineral powders from the Lake Victoria region, more particularly, Uganda, with the aim of developing firebrick refractories from the minerals. Two main deposits of kaolin and a ball clay deposit were investigated to assess their potential in the manufacture of refractory bricks. Raw- and processed sample powders were investigated by means of X-ray diffraction (XRD), thermal analysis (DTA-TG) and Scanning Electron Microscopy (SEM). In addition, the chemical composition, particle size distribution, density, and surface area of the powders were determined.</p><p>A comprehensive study on beneficiation of Mutaka kaolin was carried out using mechanical segregation of particles. The aim of the study was to explore other potential applications like in paper filling and coating. The beneficiation process improves the chemical composition of kaolin to almost pure, the major impurity being iron oxide.</p><p>A general production process scheme for manufacturing fireclay bricks starting with raw powder minerals (Mutaka kaolin and Mukono ball clay) was used to make six groups of sample fireclay brick. Experimental results from the characterization of formulated sample bricks indeed revealed the viability of manufacturing fireclay bricks from the raw minerals. Based on these results, industrial samples were formulated and manufactured at Höganäs Bjuf AB, Sweden. Kaolin from the Mutaka deposit was used as the main source of alumina while ball clay from Mukono was the main plasticizer and binder material. The formulated green body was consolidated by wet pressing and fired at 1350°C in a tunnel kiln. Characterization of the sintered articles was done by X-ray diffraction, scanning electron microscopy, and chemical composition (ICP-AES). In addition, technological properties related to thermal conductivity, thermal shock, alkali resistance, water absorption, porosity, shrinkage, permanent linear change (PLC), linear thermal expansion, refractoriness under load (RUL), and cold crushing strength were determined. The properties of the articles manufactured from the selected naturally occurring raw minerals reveal that the produced articles compare favourably with those of parallel types. Thus, the raw materials can be exploited for industrial production.</p>

<p>Development of products which can be produced from acountry's natural resources is very important as far as theindustrialization of a nation and saving foreign exchange isconcerned. Presently, industries in Uganda and the other statesin the Lake Victoria region import allrefractory-related-consumables, as the demand cannot be metlocally. Based on the abundance of ceramic raw materials forhigh temperature applications in the region and the demand forrefractories by industries it is pertinent to develop andmanufacture firebricks by exploiting the locally available rawmaterials.</p><p>This thesis thus, concerns the characterisation of ceramicraw mineral powders from in the Lake Victoria region, moreparticularly, Uganda, with the aim of developing firebrickrefractories from the minerals. Two main deposits of kaolin anda fireclay deposit, located in the Lake Victoria Region,Uganda, were investigated to assess their potential in themanufacture of refractory bricks. Raw- and processed samplepowders were investigated by means of x-ray diffraction (XRD),thermal analysis (DTA-TG) and Scanning Electron Microscopy(SEM). In addition, the chemical composition, particle sizedistribution, density, and surface area of the powders weredetermined.</p><p>A general production process scheme for manufacture offirebricks starting with raw powder minerals (Mutaka kaolin andMukono ball clay) was used to make six groups of samplefirebrick. Experimental results from the characterization offormulated sample bricks indeed reveal the viability ofmanufacturing firebricks from the raw minerals.Characterization of the sample bricks has been done fordetermination of physical and mechanical properties; density,shrinkage, porosity, water absorption, and phaseidentification. Formation of mullite, which is a principalcompound for aluminous refractories, is evidenced in thepowders with DTA tests and for the fired samples with XRD; thefired samples are dominated by mullite peaks.</p><p>Keywords: kaolin; clay; powders characterization; ceramics;mullite; Lake Victoria region;</p>

In this work an extended literature survey on ceramics and porcelains in particular, has been documented. Samples from two Ugandan deposits of each feldspar and quartz were characterised by means of X-ray diffraction, thermal analysis, chemical analysis and scanning electron microscopy and found to possess requisite properties for making electro porcelain insulators. Five porcelain bodies were formulated and samples were fabricated from materials collected from selected deposits in Uganda using different mixing proportions of clay, feldspar and quartz. The properties of the formulated bodies were studied in relation to workability, firing temperature, dielectric and bending strengths. The strengths (both mechanical and dielectric) were found to decrease as the firing temperature was increased above 1250°C. Additionally, ten formulations with components in the range of 30-60% clay, 20-45% feldspar and 20-25% sand were prepared. Specimens for mechanical and physical characterisation were made using the plastic extrusion method. The samples were characterised in terms of constituent oxide composition, flexural strength, fracture toughness, dielectric strength along with microstructural and phase properties using ICP-AES analyses, 4-point load bending strength test, Vicker’s indentation method, SEM and XRD analyses respectively. XRD studies revealed that the crystalline phases formed were mullite and quartz and their intensity was almost identical for all samples fired at 1250°C but there was a decrease inquartz content as temperature was increased above 1250°C. Samples with 20% sandcontent resulted in higher density, MOR and fracture toughness compared to thosecontaining 25% sand. Mullite content on the other hand did not change at temperatures above 1200°C but there were significant differences in the morphologies of the mullite crystals in the samples. Optimum mechanical and electrical properties were found at maximum vitrification and a microstructure showing small closely packed mullite needles. This occurred at a firing temperature of 1250°C. Three promising porcelain formulations from the above investigations were chosen and five glazes formulated to fit on biscuit fired specimens. The best-fitting glaze was adopted. The formulated specimens were investigated using dilatometry, Steger test, FEG-SEM, XRD, 4-point bending, dielectric strength and fracture toughness tests. A porcelain specimen consisting of 68% SiO2, 19% Al2O3, 4.7% K2O and a glaze of Seger formula RO:0.57Al2O3:4.86SiO2 exhibited MOR of 105MPa with Weibull modulus of 5.6 and a dielectric strength of 18kV/mm upon firing at a heating rate of 6ºC/min to 1250ºC, soaking for 2h at the top temperature and cooling down to 500°C at a rate of 6°C/min, followed by furnace cooling. The microstructure of the high strength specimen exhibited round mullite needles, quartz and glass. Holding samples for 2h at peak temperature resulted in a 22% increase in MOR compared to 1h holding. Glazing further improved strength by 67% for the best sample. Compressive stresses in glaze contributed to the strengthening effect. The dielectric and mechanical strengths obtained make the ormulated sample suitable for application in low voltage electrical insulation.<br>QC20100609

Globally, ~17 million women and ~2.1 million children are living with HIV. Sub-Saharan Africa accounts for 70% of HIV-infected (HIV+) persons. Mother-To-Child Transmission of HIV (MTCT) during pregnancy, delivery and breastfeeding, is the main route of HIV infection in children. The World Health Organisation recommends lifelong antiretroviral therapy (ART) for all HIV+ pregnant and breastfeeding mothers to prevent MTCT, and breastfeeding for ≥24 months for optimal child health in resource limited settings (Option B+ strategy). Initiation of ART in HIV+ adults is associated with a 2-6% decrease in areal bone mineral density (aBMD) regardless of ART regimen, but data are limited in pregnant and lactating women. Tenofovir, a preferred first-line drug in Option B+ ART regimen, is associated with 1-2% greater decreases in aBMD. Pregnancy and lactation are associated with physiological changes in maternal bone mineral density, but most evidence shows that this is recovered after cessation of breastfeeding. The hypothesis of this thesis is that ART may accentuate the normal process of bone mobilisation during pregnancy and lactation, leading to bone loss that is not recovered in the mother and/or compromised infant growth and bone mineral accretion. The primary objective of this research was to investigate if HIV+ women experience greater reductions in bone mineral compared to HIV-uninfected (HIV-) counterparts. Two groups of pregnant women, 95 HIV+ on ART (Tenofovir-Lamivudine-Efavirenz, previously ART naïve) and 96 HIV- were followed prospectively in Kampala, Uganda. Data were collected at 36 wks gestation (PG36), 2 (PP2) and 14 wks postpartum (PP14). Dual-energy x-ray absorptiometry was used to measure bone phenotype (aBMD, bone mineral content (BMC), bone area (BA), and size-adjusted BMC (SA-BMC, adjusted for height or length, weight and BA) of the whole body (WB) and lumbar spine (LS) in mother-baby pairs, and total hip (TH) in mothers. The primary outcome was the difference between groups in % change (± SE) in maternal LS aBMD between PP2 and PP14. Secondary outcomes included changes in maternal markers of bone formation (P1NP and BAP) and resorption (CTX), serum 25-hydroxy vitamin D (25(OH)D), parathyroid hormone (PTH), plasma and urine concentrations of creatinine (Cr), calcium (Ca), phosphate (PO4) and magnesium (Mg), urine mineral:creatinine ratios, TmCa/GFR and TMP/GFR, respectively), breastmilk mineral composition (Ca, P, Na, K and Na/K ratio); and infant growth Z-scores and bone mineral. Statistical models were adjusted for potential confounders. Median maternal age was 24.5 (IQR 21.1, 26.9) yrs. Mean gestation was 40.9±1.8 wks and not significantly different between groups. All women were breastfeeding at PP2 and PP14. More HIV+ women reported exclusive breastfeeding (PP2: 82.9% v 58.7%, p=0.0008; PP14: 86.7% v 66.2%, p=0.002). Body weight was 4-5% lower in HIV+ women. By PP14, mean duration of ART was 29.3±5.1 wks, adherence was > 95%, and the median CD4 count was 403 (IQR 290-528) cells/mm3. Maternal aBMD decreased between PP2 and PP14 at all skeletal sites in both groups as expected in lactation. Reductions in LS aBMD were not significantly different between groups (-1.8±0.4% vs -2.5±0.4%, p=0.3). However, HIV+ women had a significantly greater reduction in TH aBMD which persisted after adjustment for body size (-3.7±0.3% vs -2.7±0.3%, p=0.04). Median serum 25(OH)D was 67.4 nmol/L (IQR 54.8, 83.7) at PG36 and 57.6 nmol/L (48.7, 70.1) at PP14 with no significant difference between groups. Changes in 25(OH)D and PTH from PG36 to PP14 were not significantly different between groups (25(OH)D: -13.9±4.1% vs -11.1±3.1%; PTH: +60.0±6.4% vs +57.6±6.4%; both p > 0.05). However, HIV+ women had 33-35% greater plasma PTH concentrations at both PG36 and PP14. Bone formation and resorption markers increased in both groups between PG36 and PP14. HIV+ women had greater increases (CTX: +74.6±5.9% vs +56.2±5.9%; P1NP: +100.3±5.0% vs +72.6±5.0%; BAP: +67.2±3.6% vs +57.1±3.6%, all p < 0.05). They also had a greater decrease in plasma Ca (-6.6±0.5% vs-3.8±0.5%, p≤0.0001) and greater increase in plasma phosphate (+14.4±2.0% vs +7.7±2.0%, p=0.02). Changes in plasma Cr and Mg, TmP/GFR and urine mineral:creatinine ratios were not significantly different between the groups. However, at both PG36 and PP14, HIV+ had significantly lower mean plasma Ca (PG36: -1.0±0.5%; PP14: -4.1±0.6%) and TmP/GFR (PG36: -11.4±3.1%; PP14: -7.2±3.0%) but higher PTH (PG36: +33.0±7.0%; PP14: +35.3±7.6%) compared to HIV- women (all p < 0.05). Mean breastmilk Ca decreased between PP2 and PP14, and the changes were not different between the groups (-19.9±3.0% vs -24.2±3.1%, p=0.3). There were no significant changes in breastmilk phosphorus (P) in both groups, but HIV+ women had significantly higher concentrations (PP2: +9.7±3.8%, p=0.01; PP14:+9.6±3.5 %, p=0.007). Breastmilk P was significantly correlated with maternal plasma [CTX] in a separate ANCOVA model (β = +0.13±0.04% per 1% increase in CTX, p=0.0003). Mean breastmilk Na, K concentrations and Na/K decreased between PP2 and PP14 in both groups. However, HIV+ women had a smaller decrease in breastmilk Na (-44.3±8.9% vs -72.6±9.0%, p=0.03). They also had a trend towards smaller reduction in Na/K ratio (-22.2±9.3% vs -46.6.6±9.5%, p=0.07). Babies born to HIV+ mothers (HIV-exposed infants, HEI) had significantly lower gains in weight +53.0±1.4% vs +57.5±1.4%, p=0.02) compared to HIV-unexposed infants (HUI), and also lower weight-for-age (-0.47±0.16, p=0.003) and length-for-age (-0.53±0.18, p=0.005) Z-scores at PP14. HEI had a slower gain in WB BMC (+51.2±1.9% vs +57.3±1.9%, p=0.02), but the difference was not significant after adjustment for body size (-6.0±3.5% vs -7.6±3.8%, p=0.2); showing that the bone mineral accretion was appropriate for achieved infant size. In contrast, HEI had a greater increase in LS BMC (+29.5±1.7% vs +24.4±1.7%, p=0.03), a difference which remained after size-adjustment (+9.4±5.8% vs +4.3±6.2%, p=0.02). This is the first study to compare changes in maternal aBMD and bone metabolism between HIV+ mothers on Option B+ ART and HIV- counterparts. The results show a greater reduction in TH aBMD in Ugandan HIV+ women on Option-B+ ART compared to HIV- in the first three months of lactation, consistent with their greater increases in bone turnover markers, lower TmP/GFR and plasma phosphate, and higher breastmilk phosphorus concentration. Also, HEI have slower growth and whole body bone mineral accretion compared to HUI. It is important to determine if these changes are temporary or have long-term consequences for the bone health of the mother and child.

Abstract Reservoir prediction is a core area of research in oilfield exploration and development, and it is generally constructed on a combination of well data, seismic attributes or inversion. However, reservoir prediction in sparse well areas poses great challenges due to insufficient well control. If the quality of seismic data is poor, the spatial distribution characteristics of reservoirs cannot be effectively characterized through inversion or attribute analysis, which seriously affects the prediction accuracy. This paper proposes a new method to solve the difficulty in reservoir prediction of oilfields with sparse data and poor quality seismic cube, which evolves from depositional models, forward stratigraphic modeling (FSM) to geocellular modeling. First, based on the comprehensive analysis of core, seismic, grain size, heavy minerals, dip data, it is believed that a special fan delta developed in the Miocene strata in the south of Albert Basin. The reservoirs are dominated by distributary channels, which are in medium-coarse grains, and the provenance is from the southwest to flowing to the northeast. The formation thickness of the stratum decreases from the boundary fault to the direction of the basin. Then, the input parameters of FSM modeling are quantitatively expressed based on the sedimentary model research, including model boundary conditions, basic input information, sediment supply and transportation. FSM results were used to quantitatively characterize the deposition process. The FSM simulation results are compared with the depositional model and well data to verify the reliability. Finally, the shale content model in FSM results is resampled to the geocellular grids and used as the constraint for facies model and property model in geological modeling. This model is used for well pattern design and optimization. This new approach integrates the conceptual depositional model with quantitative FSM results. It improves the accuracy of reservoir prediction and provides a new technical workflow for reservoir characterization. Furthermore, it helps to obtain more insight into the sedimentary process and reduces the risk of oilfield exploration and development.

Abstract The Petroleum Working Group (PWG) of the United Nations Economic Commission for Europe (UNECE) has developed the Petroleum Resource Specifications and Guidelines (PRSG) to facilitate the application of the United Nations Framework Classification for Resources (UNFC) for evaluating and classifying petroleum projects. The UNFC was developed by the Expert Group on Resource Management (EGRM) and covers all resource sectors such as minerals, petroleum, renewable energy, nuclear resources, injection projects, anthropogenic resources and groundwater. It has a unique three- dimensional structure to describe environmental, social and economic viability (E-axis), technical feasibility and maturity (F-axis) and degree of confidence in the resource estimates (G-axis). The UNFC is fully aligned to holistic and sustainable resource management called for by the 2030 Agenda for Sustainable Development (2030 Agenda). UNFC can be used by governments for integrated energy planning, companies for developing business models and the investors in decision making. Internationally, all classification systems and their application continue to evolve to incorporate the latest technical understanding and usage and societal, government and regulatory expectations. The PRSG incorporates key elements from current global petroleum classification systems. Furthermore, it provides a forward-thinking approach to including aspects of integrity and ethics. It expands on the unique differentiator of the UNFC to integrate social and environmental issues in the project evaluation. Several case studies have been carried out (in China, Kuwait, Mexico, Russia, and Uganda) using UNFC. Specifically, PRSG assists in identifying critical social and environmental issues to support their resolution and development sustainably. These issues may be unique to the country, location and projects and mapped using a risk matrix. This may support the development of a road map to resolve potential impediments to project sanction. The release of the PRSG comes at a time of global economic volatility on a national and international level due to the ongoing impact and management of COVID-19, petroleum supply and demand uncertainty and competing national and international interests. Sustainable energy is not only required for industries but for all other social development. It is essential for private sector development, productive capacity building and expansion of trade. It has strong linkages to climate action, health, education, water, food security and woman empowerment. Moreover, enduring complex system considerations in balancing the energy trilemma of reliable supply, affordability, equity, and social and environmental responsibility remain. These overarching conditions make it even more essential to ensure projects are evaluated in a competent, ethical and transparent manner. While considering all the risks, it is also critical to reinforce the positive contribution a natural resource utilization project provides to society. Such an inquiry can focus on how the project contributes to the quality of life, environment, and the economy – the people, planet, and prosperity triad. Such an approach allows consistent, robust and sustainable investment decision making and energy policy development.