Relevant bibliographies by topics / Ultrasonic oscillating temperature sensors

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'Ultrasonic oscillating temperature sensors'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Ultrasonic oscillating temperature sensors.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Ultrasonic oscillating temperature sensors"

1

Afaneh, A., S. Alzebda, V. Ivchenko, and A. N. Kalashnikov. "Ultrasonic Measurements of Temperature in Aqueous Solutions: Why and How." Physics Research International 2011 (April 20, 2011): 1–10. http://dx.doi.org/10.1155/2011/156396.

Full text
Abstract:
The paper describes two different approaches to ultrasonic measurements of temperature in aqueous solutions. The first approach uses two narrowband ultrasonic transducers and support electronics that form an oscillating sensor which output frequency is related to the measured temperature. This low-cost sensor demonstrated sensitivity of about 40 Hz/K at the distance of 190 mm and the operating frequency of about 25 kHz. The second approach utilised pulse-echo mode at the centre frequency of 20 MHz. The reflector featured a cavity that was filled with deionised water. The ultrasound propagation
APA, Harvard, Vancouver, ISO, and other styles
2

Tanaka, Makoto, Hidetaka Nishida, and Yoshiro Miyazaki. "OS0613 Development of the high temperature ultrasonic sensor using oscillating heat pipe." Proceedings of the Materials and Mechanics Conference 2013 (2013): _OS0613–1_—_OS0613–2_. http://dx.doi.org/10.1299/jsmemm.2013._os0613-1_.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Yi-Jen, Chung-Ching Huang, Shih-Kai Lin, and Jie Tao. "Characteristics analysis and mold design for ultrasonic-assisted injection molding." Journal of Polymer Engineering 34, no. 7 (2014): 673–81. http://dx.doi.org/10.1515/polyeng-2013-0328.

Full text
Abstract:
Abstract This study investigated the use of ultrasonic technology in assisted injection molding (AIM) and mold design. An ultrasonic device installed in a mold was employed to vibrate a melt, thereby converting kinetic energy into thermal energy. This method enabled maintaining the desired temperature in the melt flow, preventing a high level of shear and the formation of a thick frozen layer surrounding the skin layer; thus, the injection molding efficiency was enhanced and the residual stress inside the injection-molded component was reduced. In this study, a flat sample (75 mm×47 mm×1 mm) o
APA, Harvard, Vancouver, ISO, and other styles
4

Shi, Shuai, Penghao Zhao, Pan Yang, et al. "Enhancing the Interfacial Adhesion of a Ductile Gold Electrode with PDMS Using an Interlocking Structure for Applications in Temperature Sensors." Nanomaterials 15, no. 13 (2025): 1001. https://doi.org/10.3390/nano15131001.

Full text
Abstract:
The poor interfacial adhesion between ductile gold (Au) electrodes and polydimethylsiloxane (PDMS) substrates affects their application in flexible sensors. Here, a porous Au electrode is designed and combined with a flexible PDMS substrate to form a structure that embeds Au into the PDMS film, thereby enhancing the interfacial adhesion of the Au/PDMS electrode. The resistivity change of the Au/PDMS electrode is only 12.3% after 100 tape peeling trials. The resistance of the Au/PDMS electrode remains stable at the 30% strain level after 2000 tensile cycling tests. This feature is mainly attrib
APA, Harvard, Vancouver, ISO, and other styles
5

Tittmann, Bernhard R., and Mustafa Aslan. "Ultrasonic Sensors for High Temperature Applications." Japanese Journal of Applied Physics 38, Part 1, No. 5B (1999): 3011–13. http://dx.doi.org/10.1143/jjap.38.3011.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kulczyk, Konrad, Malcolm P. Perks, and George W. Smith. "Ultrasonic temperature sensors, and ultrasonic waveguide connectors for use therewith." Journal of the Acoustical Society of America 95, no. 6 (1994): 3682. http://dx.doi.org/10.1121/1.409949.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hagemeier, Sebastian, Stanislav Tereschenko, and Peter Lehmann. "High-speed laser interferometric distance sensor with reference mirror oscillating at ultrasonic frequencies." tm - Technisches Messen 86, no. 3 (2019): 164–74. http://dx.doi.org/10.1515/teme-2019-0012.

Full text
Abstract:
AbstractOptical measurement systems are an important part of the portfolio of 3D topography sensors. By precise, contactless and rapid measurements these sensors constitute an alternative to tactile instruments. In this contribution the principle of a laser interferometric distance sensor is presented, which in combination with lateral scan axes acts as a topography sensor and also as distance sensor for the compensation of vibrations in a coherence scanning Linnik interferometer. An advantage of this distance sensor is its high acquisition rate of height values, which in case of working as a
APA, Harvard, Vancouver, ISO, and other styles
8

Farah, Hamdi, and Fidjah Abdelkader. "Temperature and porosity effect on Rayleigh velocity in superconducting material." STUDIES IN ENGINEERING AND EXACT SCIENCES 5, no. 2 (2024): e7245. http://dx.doi.org/10.54021/seesv5n2-143.

Full text
Abstract:
Our work's objective is to study the temperature effect and the porosity on ultrasonic wave velocity (Longitudinal wave velocity (VL), transverse wave velocity (VT), and Rayleigh wave velocity (VR)) of superconductor material type Y123 (or YBa2Cu3O7-x). A new model rational of temperature-porosity depending on ultrasonic wave velocities of surface and volume for an Y123 superconducting material was proposed, with each parameter having a distinct physical meaning. The study allows us to deduct the Rayleigh velocity VR following their evolution as temperature and porosity functions, bringing int
APA, Harvard, Vancouver, ISO, and other styles
9

Lionetto, Francesca, Francesco Montagna, and Alfonso Maffezzoli. "Ultrasonic Dynamic Mechanical Analysis of Polymers." Applied Rheology 15, no. 5 (2005): 326–35. http://dx.doi.org/10.1515/arh-2005-0016.

Full text
Abstract:
Abstract The propagation of ultrasonic waves in polymers depends on their viscoelastic behaviour and density, resulting significantly affected by phase transitions occurring with changing temperature and pressure or during chemical reactions. Therefore, the application of low intensity ultrasound, acting as a high frequency dynamic mechanical deformation applied to a polymer, can monitor the changes of viscoelastic properties associated with the glass transition, the crystallization, the physical or chemical gelation, the crosslinking. Thanks to the non-destructive character (due to the very s
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Hua Yu, Ke Bao Xu, Feng Qin Xie, and Ya Liu. "Temperature Field Reconstruction System Based on Ultrasonic Time-of-Flight Technique." Applied Mechanics and Materials 271-272 (December 2012): 1675–79. http://dx.doi.org/10.4028/www.scientific.net/amm.271-272.1675.

Full text
Abstract:
A temperature field related with ultrasonic propagation in the air according to the different velocity in different temperature can be reconstructed with the TOF (time of flight) measurement at different temperatures. One method of two-dimensional temperature field reconstruction has been proposed in this paper based on ultrasonic time-of-flight technique. The temperature of the total temperature field has been calculated with the method of 2-dimensional interpolation according to the temperature values measured with 8 ultrasonic sensors which has the functions of signal sending and receiving
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Ultrasonic oscillating temperature sensors"

1

Hashmi, А., and А. Kalashnikov. "Comparison of the responsiveness of ultrasonic oscillating temperature sensors (UOTSes) and conventional sensors to temperature inflection." Thesis, Sumy State University, 2017. http://essuir.sumdu.edu.ua/handle/123456789/55751.

Full text
Abstract:
Ultrasonic oscillating temperature sensors (UOTSes), in distinction to conventional temperature sensors, feature almost negligible settling time. This property can be useful for detecting malfunctions, failures and misuses of heat exchangers. However, most exchangers handle substantial thermal masses, which obscure the detection of any temperature changes. We compared the responsiveness of conventional DS18B20 sensors and an UOTS to the change in the temperature gradient of over 3.5 kg of water using a posteriori records. Temperature inflection points were estimated by extending the
APA, Harvard, Vancouver, ISO, and other styles
2

Ye, Guoliang. "Model-based ultrasonic temperature estimation for monitoring HIFU therapy." Thesis, University of Oxford, 2008. http://ora.ox.ac.uk/objects/uuid:6f4c4f84-3ca6-46f2-a895-ab0aa3d9af51.

Full text
Abstract:
High Intensity Focused Ultrasound (HIFU) is a new cancer thermal therapy method which has achieved encouraging results in clinics recently. However, the lack of a temperature monitoring makes it hard to apply widely, safely and efficiently. Conventional ultrasonic temperature estimation based on echo strain suffers from artifacts caused by signal distortion over time, leading to poor estimation and visualization of the 2D temperature map. This thesis presents a novel model-based stochastic framework for ultrasonic temperature estimation, which combines the temperature information from the ultr
APA, Harvard, Vancouver, ISO, and other styles
3

Gatsa, Oleksandr. "Development of acoustic sensors for the extension of measurements to high temperature in the experimental reactors." Thesis, Montpellier, 2018. http://www.theses.fr/2018MONTS092/document.

Full text
Abstract:
Ce travail de thèse porte sur l’étude et la réalisation d'une nouvelle génération de capteurs ultrasonore dédiés à la caractérisation des gaz de fission. Plus généralement, ces études concernent le développement de l’instrumentation du réacteur d’essai des matériaux Jules Horowitz (RJH), visant entre autre à effectuer le contrôle in situ de la composition du gaz libéré afin d’optimiser la durée de vie du combustible et le taux de combustion. La température de fonctionnement de ce nouveau réacteur devant se situer dans la plage entre 200 °C à 400 °C, la principale problématique concerne donc le
APA, Harvard, Vancouver, ISO, and other styles
4

Pospíšil, Jakub. "Bezdrátová čidla pro měření hladiny vody." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218270.

Full text
Abstract:
The thesis deals with both scheme and its implementation of water-level metering apparatus. This data are send wireless into 500 m distant station. Potential ways of solution are gradually studied and final design suggested. Detailed implementation methods are described in the following section. Ultrasonic sensors are employed for level measurement and controlling element is processor ATmega162, data are transmitted by transceiver RC1280HP. Apparatus is suggested with a view to the lowest power consumption considering it will be supplied only with a accumulator. Solving of accepting station is
APA, Harvard, Vancouver, ISO, and other styles
5

Pinto, Mauro Sérgio Silva. "ESPECIFICAÇÕES DE PROJETO PARA MEDIÇÃO DE VELOCIDADE DE VENTO UTILIZANDO ANEMÔMETRO ULTRASÔNICO COM O MÉTODO DE DIFERENÇA DE FASE." Universidade Federal do Maranhão, 2006. http://tedebc.ufma.br:8080/jspui/handle/tede/457.

Full text
Abstract:
Made available in DSpace on 2016-08-17T14:53:14Z (GMT). No. of bitstreams: 1 Mauro Sergio Silva Pinto.pdf: 649420 bytes, checksum: 2659c3409645c14d4672fc5713698782 (MD5) Previous issue date: 2006-10-27<br>The time of flight method for determining the wind speed using ultrasonic transducers is presented in this work. The techniques of phase difference and threshold detection for determining the time of flight are presented. A more detailed study of the phase difference technique is carried out in order to determine the design specifications using this method with respect to the noise sensit
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Ultrasonic oscillating temperature sensors"

1

Hashmi, A., M. Malakoutikhah, R. A. Light, and A. N. Kalashnikov. "Embedded Supervisory Control and Output Reporting for the Oscillating Ultrasonic Temperature Sensors." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-18503-3_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ward, Hubert Henry. "Ultrasonic Distance, and Humidity and Temperature Sensors." In Programming Arduino Projects with the PIC Microcontroller. Apress, 2021. http://dx.doi.org/10.1007/978-1-4842-7230-5_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mauer, F. A., S. J. Norton, H. N. G. Wadley, and B. E. Droney. "Ultrasonic Sensors to Measure Internal Temperature Distribution." In Review of Progress in Quantitative Nondestructive Evaluation. Springer US, 1986. http://dx.doi.org/10.1007/978-1-4615-7763-8_66.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ihara, Ikuo, Takuya Tomomatsu, Manabu Takahashi, Akira Kosugi, Iwao Matsuya, and Hiroyuki Yamada. "Ultrasonic Thermometry for Temperature Profiling of Heated Materials." In Smart Sensors, Measurement and Instrumentation. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-32180-1_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Periyannan, Suresh, and Krishnan Balasubramaniam. "Development of Distributed and Coupled Ultrasonic Waveguide Sensors for Hot Chamber’s Temperature Measurements." In Advances in Non-Destructive Evaluation. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-2604-2_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Janak, N., A. Wisemin Lins, Annamalai Solayappan, and E. N. Ganesh. "Implementation of Smart Wheelchair using Ultrasonic Sensors and Labview." In Intelligent Technologies for Automated Electronic Systems. BENTHAM SCIENCE PUBLISHERS, 2024. http://dx.doi.org/10.2174/9789815179514124010015.

Full text
Abstract:
The patient-monitoring smart wheelchair system is a mobility aid for people with disabilities and continuously tracks the user's vital body metrics. Four interfaces—eyeball control, gesture control, joystick control, and voice control—have been created for wheelchair control in order to cater to various limitations. The image of the eyeball is captured using a camera. In order to make the necessary decisions based on the position of the eyeball, LabVIEW is used. The wheelchair movement can also be controlled by the other three modes. Anti-collision mechanisms are implemented using ultrasonic s
APA, Harvard, Vancouver, ISO, and other styles
7

Satheesh Kumar, S., Sumaiya Shaikh, Nikhila Kathirisetty, Ganesh Bhaiyya Regulwar, and E. Ravi Kumar. "Fundamentals of Wireless Sensor Networks." In Advances in Computer and Electrical Engineering. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-3940-4.ch002.

Full text
Abstract:
As the current computing era is working behind digital data, it is indeed important to concentrate on climatic change, which has become dynamic. Even a few non-automation processes have been converted into automation by using IIoT and industry 4.0 revolution technologies such as data analytics, the Internet of Things, cybersecurity, and machine learning. Sensor networks (SN) play a pivotal role in the collection and transformation of data through electronic devices as sensors. The sensors that work in this stream are ultrasonic sensors that help measure the distance between two vehicles. This
APA, Harvard, Vancouver, ISO, and other styles
8

Bhutani, Monica, Monica Gupta, Ayushi Jain, Nishant Rajoriya, and Gitika Singh. "Integration of Advanced Obstacle Avoidance in Automated Robots to Enhance Autonomous Firefighting Capabilities." In Advances in Computational Intelligence and Robotics. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-6150-4.ch004.

Full text
Abstract:
The integration of obstacle avoidance and fire extinguishing in robots is essential for large-scale projects. This paper presents the design, development, and performance evaluation of autonomous robots with fire detection and extinguishing capabilities. Using fire and temperature sensors for accurate detection and ultrasonic sensors for obstacle avoidance, the robot navigates dynamic environments while adhering to safety requirements. The paper details the selection and integration of hardware components, including sensors, actuators, and microcontrollers, and evaluates the robot's performanc
APA, Harvard, Vancouver, ISO, and other styles
9

Larrarte, Frédérique, Mathieu Lepot, Francois H. L. R. Clemens-Meyer, et al. "Water level and discharge measurements." In Metrology in Urban Drainage and Stormwater Management: Plug and Pray. IWA Publishing, 2021. http://dx.doi.org/10.2166/9781789060119_0035.

Full text
Abstract:
Abstract The knowledge of water levels and discharges in urban drainage and stormwater management (UDSM) systems is of key importance to understand their functioning and processes, to evaluate their performance, and to provide data for modelling. In this chapter, devoted mainly to underground combined and separate sewer pipe systems, various methods and technologies are described and discussed. After an introduction to important aspects to deal with when measuring discharges in sewer systems, the following parts are presented successively: (i) measurement of water level with rulers, and pressu
APA, Harvard, Vancouver, ISO, and other styles
10

S. Khachunts, Aleksandr, Gevorg S. Gevorgyan, Anush A. Tumanian, et al. "A Single-Layer Flat-Coil-Oscillator-Based Technology as a Highly Sensitive Promising Detector for State-of-the-Art “Cognitive Radio Systems”." In New Insights on Oscillators and Their Applications to Engineering and Science [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.112305.

Full text
Abstract:
A low-power stable self-oscillator with a single-layer flat coil was proposed by us in the late 1990s as a sensitive measurement method. It soon became a technological platform called a single-layer flat-coil-oscillator technology (SFCO technology). Two classes of sensors were designed based on SFCO platform: with and without the mechanical vibrating system. Both of them have already demonstrated their capabilities to solve problems of low-temperature experimental physics. This method also helped to increase the resolution of detectors in seismology/geophysics and develop diagnostic techniques
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Ultrasonic oscillating temperature sensors"

1

Farison, John. "Automated Remote Thickness Monitoring of High Temperature Geothermal Steam Piping Using Dry-coupled Waveguide Ultrasonic Transducers at the Geysers." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09595.

Full text
Abstract:
Abstract This paper describes an automated remote ultrasonic thickness (UT) monitoring system using dry-coupled waveguide ultrasonic transducers at The Geysers. Dry-coupled waveguide UT transducers can provide remote real-time measurement of wall thicknesses on high temperature process piping without failure of the ultrasonic transducers and without the removal and reinstallation of insulation. An ultrasonic wall thickness monitoring system has been automated with battery powered UT sensors, wireless radio communication to a computer network gateway, and automated scheduled collection and stor
APA, Harvard, Vancouver, ISO, and other styles
2

Wangensteen, Magnus, and Ali Fatemi. "Temperature Compensation for Ultrasound Corrosion Monitoring." In CONFERENCE 2025. AMPP, 2025. https://doi.org/10.5006/c2025-00503.

Full text
Abstract:
Abstract Non-intrusive ultrasound monitoring of pipe walls enables the detection of wall thinning with micrometre accuracy. This is achieved by measuring the time of acoustic reflection between the inner and outer wall surfaces. A fundamental challenge is that the propagation speed of the ultrasonic wave has a weak dependency on the material temperature, which could vary with ambient temperature and pipe flow temperature. Compensating for temperature fluctuations is achieved today by probing the temperature combined with apriori assumptions about the temperature coefficient for the given mater
APA, Harvard, Vancouver, ISO, and other styles
3

Sawada, Kota, Yasushi Taniuchi, Takehiro Nojima, et al. "Nondestructive Detection of Creep Damage in ASME Grade 91 Steel Welds." In AM-EPRI 2024. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.am-epri-2024p0960.

Full text
Abstract:
Abstract This study evaluates various nondestructive testing methods for detecting creep damage and assessing residual life in Grade 91 steel welds. Three primary detection techniques were investigated: phased array ultrasonic testing (PAUT), eddy current testing with high-temperature superconductor direct current and superconducting quantum interference device (ECT•HTS-dc-SQUID), and replica observation. PAUT detected creep damage between 60-80% of creep life, while ECT•HTS-dc-SQUID showed detection capability between 80-90% of creep life. Replica observation revealed creep voids only in the
APA, Harvard, Vancouver, ISO, and other styles
4

Champlin, Tom, Jake Davies, Sam Lordo, and Philip Thornthwaite. "Safe Processing of Naphthenic Acid Opportunity Crudes Using Chemical Inhibition and Online Monitoring." In CORROSION 2017. NACE International, 2017. https://doi.org/10.5006/c2017-09067.

Full text
Abstract:
Abstract Continuing economic pressures on the refining industry are forcing more refiners to evaluate the possibilities of processing lower priced, opportunity crudes to improve margins. These crudes are often considerably more corrosive than more expensive crudes, containing potentially higher levels of naphthenic acid. The processing of naphthenic acid containing crudes introduces significant challenges to the refiner, with the risk of high temperature naphthenic acid corrosion being one of the primary concerns. If refiners are to take full advantage of these discounted opportunity crudes, t
APA, Harvard, Vancouver, ISO, and other styles
5

Elyounsi, Ali, and Alexander N. Kalashnikov. "Quantitative Experimental Evaluation of Ultrasonic Oscillating Temperature Sensors." In 2024 IEEE UFFC Latin America Ultrasonics Symposium (LAUS). IEEE, 2024. http://dx.doi.org/10.1109/laus60931.2024.10553028.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hashmi, Anas, Alexander N. Kalashnikov, and Roger A. Light. "Experimental evaluation of ultrasonic oscillating temperature sensors (UOTS) under cyclically changing temperatures." In 2015 IEEE International Ultrasonics Symposium (IUS). IEEE, 2015. http://dx.doi.org/10.1109/ultsym.2015.0249.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Elyounsi, Ali, Tim J. Mulroy, and Alexander N. Kalashnikov. "Experimental Measurement of Air Temperature in an Enclosure Using Ultrasonic Oscillating Temperature Sensors (Uotses)." In International Electronic Conference on Sensors and Applications. MDPI, 2023. http://dx.doi.org/10.3390/ecsa-10-16001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Elyounsi, Ali, and Alexander N. Kalashnikov. "Ultrasonic Oscillating Temperature Sensor for Operation in Air." In ECSA-8. MDPI, 2021. http://dx.doi.org/10.3390/ecsa-8-11276.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Elyounsi, Ali, and Alexander N. Kalashnikov. "Using Ultrasonic Oscillating Temperature Sensors (UOTSes) to Measure Aggregate temperatures in Liquid and Gaseous Media." In 2021 IEEE UFFC Latin America Ultrasonics Symposium (LAUS). IEEE, 2021. http://dx.doi.org/10.1109/laus53676.2021.9639196.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Elyounsi, Ali, and Alexander N. Kalashnikov. "Continuous Rapid Accurate Measurement of the Output Frequency of Ultrasonic Oscillating Temperature Sensors." In ECSA-9. MDPI, 2022. http://dx.doi.org/10.3390/ecsa-9-13340.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Ultrasonic oscillating temperature sensors' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography