Log in

Relevant bibliographies by topics / UV-curing film

Contents

Journal articles
Dissertations / Theses
Conference papers

Academic literature on the topic 'UV-curing film'

Author: Grafiati

Published: 7 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'UV-curing film.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "UV-curing film"

1

Wattanachai, Piyachat, Christian Antonio, and Susan Roces. "Comparison of Thermal Properties of PCB Photoresist Films Cured by Different Techniques." ASEAN Journal of Chemical Engineering 15, no. 2 (2016): 20. http://dx.doi.org/10.22146/ajche.49684.

Full text

Abstract:

The possibility of implementing microwave technology to photoresist film curing which is a major process in the production of electronic printed circuit boards (PCB) was investigated and compared with a conventional curing method, e.g. UV lithography. Since both techniques involved irradiation, hot plate curing which relies on thermal conduction was undertaken to study the effect of a heat transfer approach. Two film thicknesses were studied, i.e. 0.0012 and 0.002 inch, and the effects of curing power and time were investigated. Thermal properties, i.e. percent cure, glass transition temperatu

APA, Harvard, Vancouver, ISO, and other styles

2

Takeda, M., N. Matoba, K. Matsuda, et al. "Effect of ultraviolet cure on the interfacial toughness and structure of SiOC thin film on Si substrate." Journal of Materials Research 25, no. 10 (2010): 1910–16. http://dx.doi.org/10.1557/jmr.2010.0251.

Full text

Abstract:

An experimental study on the adhesion of thin films was conducted for the ultraviolet (UV)-cured SiOC films on Si substrate by examining the mechanical energy balance during the indentation process combined with atomic force microscopy observation. The effect of UV cure on the interfacial delamination toughness and the structure of the SiOC films are discussed. The energy release rate of the SiOC film/Si substrate interfacial delamination increases with the increases in the time of UV curing, indicating that the indentation method is efficient to examine the adhesion of coating. As the UV curi

APA, Harvard, Vancouver, ISO, and other styles

3

Zhang, Li Juan, Chen Bo Wu, Fei Yang, Xiao Yi Geng, Meng Qian Li, and Ji Jun Xiao. "Preparation and Characterization of UV Curable Hybrid System Based on Free Radical and Cationic Mechanism." Applied Mechanics and Materials 470 (December 2013): 141–45. http://dx.doi.org/10.4028/www.scientific.net/amm.470.141.

Full text

Abstract:

A UV curable hybrid system with a dual mechanism of radical and cationic photo-polymerization, was investigated. A kind of free radical oligomer with low viscosity named hexahydrophthalic acid diglycidyl acrylate was first synthesized. The structure of the oligomer was characterization by FTIR. The UV curing processing of hybrid system was traced by real-time FTIR, and compared with free radical, cationic system. Thermal decomposition temperature and glass transition temperature of UV curing film for various system were determined by thermogravimetric analysis (TGA) and differental scanning ca

APA, Harvard, Vancouver, ISO, and other styles

4

Ning, Jianping, Chunjie Niu, Zhen Tang, Yue Sun, Hao Yan, and Dayu Zhou. "Optimizing the PECVD Process for Stress-Controlled Silicon Nitride Films: Enhancement of Tensile Stress via UV Curing and Layered Deposition." Coatings 15, no. 6 (2025): 708. https://doi.org/10.3390/coatings15060708.

Full text

Abstract:

Silicon nitride (SiN) films deposited via plasma-enhanced chemical vapor deposition (PECVD) exhibit tunable tensile stress, which is critical for various microelectronic and optoelectronic applications. In this paper, the effects of silane (SiH4) flow rate during PECVD deposition, ultraviolet (UV) curing, and layered deposition on the tensile stress of SiN films are mainly investigated. The results reveal that increasing the SiH4 concentration raises hydrogen incorporation, which modifies internal stress dynamics. UV curing significantly increases tensile stress by breaking N-H and Si-H bonds,

APA, Harvard, Vancouver, ISO, and other styles

5

Abadie, Marc J. M., and Vanda Yu Voytekunas. "New Trends in UV Curing." Eurasian Chemico-Technological Journal 6, no. 1 (2016): 67. http://dx.doi.org/10.18321/ectj336.

Full text

Abstract:

We present an overview of the use of photochemistry applied to polymerization and crosslinking reactions by radical or cationic process used for thin film technologies and more generally for coatings. Industrially, most of the formulations used are initiated by radical mechanism. Since the discovery by J. Crivello of iodonium and sulfonium salts, the market has been oriented to use cationic systems to crosslink monomers/oligomers. One of the main advantage of such a system is that it is not sensitive to the presence of oxygene as it is for radical mechanisms. An overview of a photosensitive fo

APA, Harvard, Vancouver, ISO, and other styles

6

Qi, Jing Jing, Mao Bing Shuai, Yuan Lin Zhou, and Feng Wen Chang. "Preliminary Structure Characterization of UV Curing Paint Film." Advanced Materials Research 1120-1121 (July 2015): 49–52. http://dx.doi.org/10.4028/www.scientific.net/amr.1120-1121.49.

Full text

Abstract:

PC film has some shortcomings such as low surface energy and strong rigidity. In order to improve the impact strength and adhesive properties of PC film, UV curing coating which was used on the surface of the PC film achieved good results. However, the combination between the UV curing paint-PC composite membrane had not been explained clearly. In this paper, we analyzed the structure of UV curing varnish oligomers. Fourier Transform Infrared Spectroscopy (FTIR) 、X-ray Photoelectron Spectroscopy (XPS) and Liquid Chromatograph Mass Spectrometer (LC-MS) were used to characterize. Through the exp

APA, Harvard, Vancouver, ISO, and other styles

7

Jung, Jaehan. "Continuous manufacturing of 3D patterned hybrid film via a roll-to-roll process with UV curing." Modern Physics Letters B 34, no. 07n09 (2020): 2040039. http://dx.doi.org/10.1142/s0217984920400394.

Full text

Abstract:

A strategy for continuous fabrication of a microscale 3D-patterned hybrid composite film composed of alumina and acrylate resin was developed using roll-to-roll production. Conventional thermal curing was replaced with a UV curing procedure to facilitate rapid and economical processing. A seamless engraved soft urethane mold was first produced using a patterned metal roll. Subsequently, alumina and acrylate resin were cured on the engraved mold via UV irradiation to produce patterned hybrid films. The dispersion of alumina particles in acylate resin was enhanced by utilizing amine acrylate. Ph

APA, Harvard, Vancouver, ISO, and other styles

8

Choi, Woo-Chan, Vishal Gavande, Dong-Yun Kim, and Won-Ki Lee. "Study on Press Formability and Properties of UV-Curable Polyurethane Acrylate Coatings with Different Reactive Diluents." Polymers 15, no. 4 (2023): 880. http://dx.doi.org/10.3390/polym15040880.

Full text

Abstract:

UV-curable coatings have numerous advantages, including environmental sustainability due to 100% solid content, economic feasibility attributable to relatively fast curing time, decent appearance, mechanical properties, chemical resistance, and abrasion resistance. However, UV-curable polyurethane acrylate coatings on metals apparently restrict their engineering applications owing to low mechanical properties and poor thermal stability, giving UV-curable coatings less flexibility and formability. In this study, we evaluated the property change of films according to the type of reactive diluent

APA, Harvard, Vancouver, ISO, and other styles

9

Chu, Fu Qiang. "Blending Property of Water-Based UV-Curable Polyurethane Acrylate and Epoxy Acrylate." Advanced Materials Research 174 (December 2010): 385–88. http://dx.doi.org/10.4028/www.scientific.net/amr.174.385.

Full text

Abstract:

Water-based UV-curable prepolymers are novel environmentally friendly materials. The blending property of two kinds of the prepolymers, water-based UV-curable polyurethane acrylate (UVPU) and water-based UV-curable epoxy acrylate (WEA), was studied in this paper. Blending compatibility, curing rate, optical and mechanical properties, and the cross-section morphology of the cured films of UVPU and WEA were investigated by Fourier transform infrared (FTIR), UV-visible spectrophotometer (UV-vis) and Environmental scanning electron microscopy (ESEM). Results indicated that the two prepolymers had

APA, Harvard, Vancouver, ISO, and other styles

10

Gao, Jun Gang, Feng Li Zhu, Jiang Bo Yang, and Xiao Qian Liu. "Synthesis and Curing Kinetics of UV-Curable Waterborne Bisphenol-S Epoxy Acrylate/Polyurethane-Acrylate Coating." Advanced Materials Research 549 (July 2012): 457–61. http://dx.doi.org/10.4028/www.scientific.net/amr.549.457.

Full text

Abstract:

In ouder to prepare the waterborne UV-curable polyurethane acrylate coatings, the anionic polyurethane acrylate emulsifier and bisphenol-S eopxy acrylate were synthesized. The curing process, kinetics and properties of waterborone UV-curable epoxy acrylate/polyurethanes acrylate coating were investigated by FTIR, DSC and DMA. The results show that the static initial curing temperature Ti is 52.36 oC, peak temperature Tp is 71.58 oC, the finished temperature Tf is 89.15 oC. The curing reaction can be described by two-parameter autocatalytic Šesták-Berggren (S-B) model.This coating has a better

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "UV-curing film"

1

Baxter, J. E. "Acylphosphine oxides as photoinitiators." Thesis, City University London, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.380699.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Simon, Darren, and s3027589@student rmit edu au. "Chemistry and Morphology of Polymer Thin Films for Electro-Optical Application." RMIT University. Applied Sciences, 2006. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20070123.122707.

Full text

Abstract:

Thin polymer films and their properties have been investigated. The characteristics of crystalline polymers according to film thickness have been improved using polycaprolactone (PCL). The melting enthalpy of PCL has increased when the film thickness decreased and the peak melting temperature showed no significant changes with film thickness. Film thickness variation influenced surface roughness and crystal size. Optical microscope images showed the rougher surface of thicker films. The spinning time has shown no influence on film thickness and no significant changes to surface roughness.

APA, Harvard, Vancouver, ISO, and other styles

3

HSU, CHIN-CHI, and 許進吉. "Research of UV Curing Film by Vacuum Polymer Spray System." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/886p2j.

Full text

Abstract:

碩士<br>國立中央大學<br>光電科學與工程學系<br>107<br>Volatile Organic Compounds, VOCs, are environmental source of pollution, which mainly emitted by using solvent in industry of painting. Nowadays, the workplace of painting is most in atmosphere, if we exposure in this place, it may damage the human body. In order to reduce the solvent used in painting, in other words, reduce the contact with VOCs, this study established a vacuum polymer coating system to improve the spraying environment and use solvent-free coatings to move the process of industrial coating in the atmosphere to vacuum. Recycling and exhausti

APA, Harvard, Vancouver, ISO, and other styles

4

Fan, Gang-Yu, and 范剛瑜. "The Study on Kinetics of UV Curing Film Containing Siloxanes." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/879n7u.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

WU, YEN-CHENG, and 吳晏城. "Optimal Parameter Design for UV Curing Process of Optical Thin Film." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/66358252896770863908.

Full text

Abstract:

碩士<br>逢甲大學<br>工業工程與系統管理學研究所<br>94<br>The production operation of modern industry is facing the competition way of a small amount, diversification, and quickly response. UV curing process of optical thin film is according with this kind of characteristic. This study use Taguchi method as the main tactics to probe into three key quality characteristics of optimal parameters design for UV curing process of optical thin film, and then utilize Cause and Effect diagram to combine with the practice experience of the factory to find out 6 control factors. We choose L18 (21X37) table from Taguchi st

APA, Harvard, Vancouver, ISO, and other styles

6

Shiun-Chang, Jan, and 詹勳昌. "Synthesis and Characterization of UV-Curing Acrylate-silica hybrid optical film." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/04491112135768315193.

Full text

Abstract:

碩士<br>國立臺灣大學<br>化學工程學研究所<br>89<br>In this study, acrylic polymer/silica hybrid films were prepared by UV-curing. In the preparation scheme, the colloidal silica was first reacted with a coupling agent, 3-(trimethoxy silyl)propyl methacrylate(MSMA); and then polymerized with a multifunctional acrylic monomer by UV-curing. The acrylic monomers used in this study were TMPTA and HDODA. Nano-scale(12nm) colloidal silica solution was used for achieving high optical transparency. The effects of the reaction formulations on the properties of the prepared films were investigated, including the ratio of

APA, Harvard, Vancouver, ISO, and other styles

7

Yen, Kuo-En, and 顏國恩. "Effects of UV-Curing Time on the Thin-Film and Mechanical Properties of Porous Dielectrics." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/52135454333447071959.

Full text

Abstract:

碩士<br>國立成功大學<br>機械工程學系碩博士班<br>96<br>Two materials are used to solve the RC delay issue in the multi-layer conducting line of integrated circuit (IC) devices. One is low-k dielectric material (for its low capacity), and the other is copper contact line (for its low resistitivity). However, as there will be residue stress due to the thermal expansion coefficient difference between the low-k dielectric and its adjacent material. Furthermore, as the low-k dielectric material generally has a loose structure, and hence a low mechanical yield strength, the IC device would be easily destroyed durin

APA, Harvard, Vancouver, ISO, and other styles

8

CHEN, MIN-HUNG, and 陳旻宏. "Surface Planarization of Flexible Transparent UV Curing Polymeric Thin-film Encapsulation Adhesive by Bar Coating." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/wtk5n4.

Full text

Abstract:

碩士<br>國立臺北科技大學<br>化學工程與生物科技系生化與生醫工程碩士班<br>107<br>In this research, ladder-structured polysilsesquioxanes were synthesized by sol-gel reaction using acrylate groups containing acrylate groups. To make different way of synthesizing blocked OH groups, or different coating temperatures, or using defoaming machine, or adding diluent or defoamer, to change organic resin coating conditions. Before UV coating, these different resins are mixed with photo-initiator, respectively. Finally, these organic nanocomposites would be coated by stick automatic coating machine and be cured in UV light on the subs

APA, Harvard, Vancouver, ISO, and other styles

9

Lin, Jhih-Kun, and 林志坤. "Synthesis and characterization of polyurethane acrylate/anatase titanium dioxide nanoparticles hybrid film via UV-curing technology." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/47922447769064153376.

Full text

Abstract:

碩士<br>國立勤益科技大學<br>化工與材料工程系<br>97<br>The UV-curable technology has gained more and more speedy development.The UV-curable coating has a wide range of applications in package,building materials,electrommunication and traffic, due to their have high efficiency,reduced energy consumption,environmental protection,instant drying and low energy. At present,UV-curable polyurethane acrylate coating was prepared from 2,4-tolyene diisocyanate, but this kind of isocyanate prepolymer coating is easy to turn yellow.It will form the colored quinine or the azo structure in the photoirradiated process and the

APA, Harvard, Vancouver, ISO, and other styles

10

陳雅雯. "Finite Element Analysis on UV Curing of the Optical Films." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/63f366.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "UV-curing film"

1

Bock, Peter, та James Reynolds. "Polysiloxane Based Spray-on Insulative Coating for Higher Operating Temperatures, and Better λ Value than Acrylic Spray-on or Spray-applied Foam Insulations". У CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-11419.

Full text

Abstract:

Abstract Polysiloxane is an inorganic polymer chemistry with superior properties including temperature tolerance and UV resistance in comparison to organic type polymer chemistries. New R&D efforts in ambient cure, third generation, polysiloxane technology eliminate existing issues of post cure polysiloxane coatings, including low film hardness, anti-corrosion properties & weathering resistance prior to post curing &gt;300 °F. Recent R&D efforts in polysiloxane matrix spray-on insulation have resulted in ultra-high-build and higher temperature capabilities to 400 mils DFT per c

APA, Harvard, Vancouver, ISO, and other styles

2

Park, Y. K. "Practicabilities of Low Temperature Curing System on Offshore Structures." In CORROSION 2005. NACE International, 2005. https://doi.org/10.5006/c2005-05006.

Full text

Abstract:

Abstract This paper will cover the progress of low temperature cure systems on offshore structures and ballast tanks practically applied in Korean winter conditions over the last 15-20 years. Starting with coal tar epoxy coatings then to tar-free systems and the recent introduction of pure epoxy systems with a universal primer concept as a protective anti-corrosive primer both for above and under water areas. Korean shipyards are unique within the industry in that they build ships and offshore structures very quickly and survive in the marketplace by productivity improvements. For example, HHI

APA, Harvard, Vancouver, ISO, and other styles

3

Cai, Xinchen, Tianjiao Teng, Xuanyu Lin, et al. "Film Property Analysis by FTIR on ULK Film Deposition and UV Curing Process." In 2022 China Semiconductor Technology International Conference (CSTIC). IEEE, 2022. http://dx.doi.org/10.1109/cstic55103.2022.9856724.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Pillapakkam, Shriram, N. A. Musunuri, and P. Singh. "Self-Assembly of Monolayers of Submicron Sized Particles on Thin Liquid Films." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-65324.

Full text

Abstract:

In this paper, we present a technique for freezing monolayers of micron and sub-micron sized particles onto the surface of a flexible thin film after the self-assembly of a particle monolayer on fluid-liquid interfaces has been improved by the process we have developed where an electric field is applied in the direction normal to the interface. Particles smaller than about 10 microns do not self-assemble under the action of lateral capillary forces alone since capillary forces amongst them are small compared to Brownian forces. We have overcome this problem by applying an electric field in the

APA, Harvard, Vancouver, ISO, and other styles

5

Tangyunyong, P., A. Y. Liang, A. W. Righter, D. L. Barton, and J. M. Soden. "Localizing Heat-Generating Defects Using Fluorescent Microthermal Imaging." In ISTFA 1996. ASM International, 1996. http://dx.doi.org/10.31399/asm.cp.istfa1996p0055.

Full text

Abstract:

Abstract Fluorescent microthermal imaging (FMI) involves coating a sample surface with a thin fluorescent film that, upon exposure to UV light source, emits temperature-dependent fluorescence [1-7]. The principle behind FMI was thoroughly reviewed at the ISTFA in 1994 [8, 9]. In two recent publications [10,11], we identified several factors in film preparation and data processing that dramatically improved the thermal resolution and sensitivity of FMI. These factors include signal averaging, the use of base mixture films, film stabilization and film curing. These findings significantly enhance

APA, Harvard, Vancouver, ISO, and other styles

6

Bayer, I. S., C. M. Megaridis, J. Zhang, and D. Gamota. "Use of Contact Angle Hysteresis in Estimating Thin Polymer Film Surface Energy and Wettability." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-16173.

Full text

Abstract:

A recent surface energy estimation method [1] interpreting contact angle hysteresis measurements was used to estimate surface energy of various commercially important polymer films including UV radiation cross-linked acrylic based monomer systems. The validity of the method was tested on highly hydrophobic non-polar amorphous fluoro-polymers using a number of polar and low surface tension liquids. Contact angle hysteresis was present on these surfaces even though surface morphology of the solution processed fluoro-polymers is close to ideal. Estimated surface energies using such probe liquids

APA, Harvard, Vancouver, ISO, and other styles

7

Miyagawa, Yoshihiro, Tatunori Murata, Yukiko Nishida, et al. "Local Bonding Structure of High-Stress Silicon Nitride Film modified by UV Curing for Strained-Silicon Technology beyond 45nm Node SoC Devices." In 2006 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2006. http://dx.doi.org/10.7567/ssdm.2006.g-2-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hohnholz, Arndt, Kotaro Obata, Daniel Albrecht, et al. "Multimaterial bathless stereolithography using aerosol jet printing and UV laser based polymerization." In ICALEO 2018: 37th International Congress on Applications of Lasers & Electro-Optics. Laser Institute of AmericaLIA, 2018. https://doi.org/10.2351/7.0004015.

Full text

Abstract:

Conventional stereolithography uses a bath based system, in which a constant layer thickness is applied to realize 3D printing. This approach limits the fabrication of parts consisting on one material only. To overcome this issue we developed a new approach for additive manufacturing using UV curing polymers. In a two step layer-by-layer process, first a liquid monomer film is applied using an Aerosol Jet. Two droplet generators allow the deposition of pure materials as well as various compositions of both materials. In this way, a discrete transition from one pure material to another is possi

APA, Harvard, Vancouver, ISO, and other styles

9

Emeigh, Carson, Haipeng Zhang, and Sangjin Ryu. "Fabrication of a Microfluidic Cell Compressor Using a 3D-Printed Mold." In ASME 2022 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/fedsm2022-87613.

Full text

Abstract:

Abstract Microfluidic devices are used to apply mechanical stimuli, such as compressive force and flow shear force, to cells for mechanobiology studies. Previously, we developed a microfluidic cell compressor in which cells embedded in hydrogel scaffolds were compressed by polydimethylsiloxane (PDMS) balloons, which were expanded pneumatically, in proportion to the balloon diameter. The device consisted of two PDMS layers. The bottom layer contained channels connected to circular wells and was fabricated using SU-8 photoresist molds. The top layer was a thin PDMS membrane separately prepared b

APA, Harvard, Vancouver, ISO, and other styles

10

Gage, D. M., E. P. Guyer, J. F. Stebbins, et al. "UV Curing Effects on Glass Structure and Mechanical Properties of Organosilicate Low-k Thin Films." In Proceedings of the IEEE 2006 International Interconnect Technology Conference. IEEE, 2006. http://dx.doi.org/10.1109/iitc.2006.1648673.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!